diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst
index 2dca52c..6283c26 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst
@@ -24,13 +24,14 @@
       described here in this glossary.
 
 .. glossary::
+   :sorted:
 
    :term:`ASSUME_PROVIDED`
       Lists recipe names (:term:`PN` values) BitBake does not
       attempt to build. Instead, BitBake assumes these recipes have already
       been built.
 
-      In OpenEmbedded-Core, ``ASSUME_PROVIDED`` mostly specifies native
+      In OpenEmbedded-Core, :term:`ASSUME_PROVIDED` mostly specifies native
       tools that should not be built. An example is ``git-native``, which
       when specified allows for the Git binary from the host to be used
       rather than building ``git-native``.
@@ -83,14 +84,14 @@
 
       -  Attempts to access networks not in the host list cause a failure.
 
-      Using ``BB_ALLOWED_NETWORKS`` in conjunction with
+      Using :term:`BB_ALLOWED_NETWORKS` in conjunction with
       :term:`PREMIRRORS` is very useful. Adding the
-      host you want to use to ``PREMIRRORS`` results in the source code
+      host you want to use to :term:`PREMIRRORS` results in the source code
       being fetched from an allowed location and avoids raising an error
       when a host that is not allowed is in a
       :term:`SRC_URI` statement. This is because the
-      fetcher does not attempt to use the host listed in ``SRC_URI`` after
-      a successful fetch from the ``PREMIRRORS`` occurs.
+      fetcher does not attempt to use the host listed in :term:`SRC_URI` after
+      a successful fetch from the :term:`PREMIRRORS` occurs.
 
    :term:`BB_CONSOLELOG`
       Specifies the path to a log file into which BitBake's user interface
@@ -177,7 +178,7 @@
       issues a warning when the disk space in the ``${SSTATE_DIR}``
       directory drops below 1 Gbyte or the number of free inodes drops
       below 100 Kbytes. Subsequent warnings are issued during intervals as
-      defined by the ``BB_DISKMON_WARNINTERVAL`` variable.
+      defined by the :term:`BB_DISKMON_WARNINTERVAL` variable.
 
       The second example stops the build after all currently executing
       tasks complete when the minimum disk space in the ``${TMPDIR}``
@@ -191,14 +192,14 @@
    :term:`BB_DISKMON_WARNINTERVAL`
       Defines the disk space and free inode warning intervals.
 
-      If you are going to use the ``BB_DISKMON_WARNINTERVAL`` variable, you
+      If you are going to use the :term:`BB_DISKMON_WARNINTERVAL` variable, you
       must also use the :term:`BB_DISKMON_DIRS`
       variable and define its action as "WARN". During the build,
       subsequent warnings are issued each time disk space or number of free
       inodes further reduces by the respective interval.
 
-      If you do not provide a ``BB_DISKMON_WARNINTERVAL`` variable and you
-      do use ``BB_DISKMON_DIRS`` with the "WARN" action, the disk
+      If you do not provide a :term:`BB_DISKMON_WARNINTERVAL` variable and you
+      do use :term:`BB_DISKMON_DIRS` with the "WARN" action, the disk
       monitoring interval defaults to the following:
       BB_DISKMON_WARNINTERVAL = "50M,5K"
 
@@ -231,23 +232,23 @@
       based on the interval occur each time a respective interval is
       reached beyond the initial warning (i.e. 1 Gbytes and 100 Kbytes).
 
-   :term:`BB_ENV_WHITELIST`
-      Specifies the internal whitelist of variables to allow through from
-      the external environment into BitBake's datastore. If the value of
-      this variable is not specified (which is the default), the following
-      list is used: :term:`BBPATH`, :term:`BB_PRESERVE_ENV`,
-      :term:`BB_ENV_WHITELIST`, and :term:`BB_ENV_EXTRAWHITE`.
+   :term:`BB_ENV_EXTRAWHITE`
+      Specifies an additional set of variables to allow through (whitelist)
+      from the external environment into BitBake's datastore. This list of
+      variables are on top of the internal list set in
+      :term:`BB_ENV_WHITELIST`.
 
       .. note::
 
          You must set this variable in the external environment in order
          for it to work.
 
-   :term:`BB_ENV_EXTRAWHITE`
-      Specifies an additional set of variables to allow through (whitelist)
-      from the external environment into BitBake's datastore. This list of
-      variables are on top of the internal list set in
-      :term:`BB_ENV_WHITELIST`.
+   :term:`BB_ENV_WHITELIST`
+      Specifies the internal whitelist of variables to allow through from
+      the external environment into BitBake's datastore. If the value of
+      this variable is not specified (which is the default), the following
+      list is used: :term:`BBPATH`, :term:`BB_PRESERVE_ENV`,
+      :term:`BB_ENV_WHITELIST`, and :term:`BB_ENV_EXTRAWHITE`.
 
       .. note::
 
@@ -263,7 +264,7 @@
    :term:`BB_FILENAME`
       Contains the filename of the recipe that owns the currently running
       task. For example, if the ``do_fetch`` task that resides in the
-      ``my-recipe.bb`` is executing, the ``BB_FILENAME`` variable contains
+      ``my-recipe.bb`` is executing, the :term:`BB_FILENAME` variable contains
       "/foo/path/my-recipe.bb".
 
    :term:`BB_GENERATE_MIRROR_TARBALLS`
@@ -276,18 +277,6 @@
 
          BB_GENERATE_MIRROR_TARBALLS = "1"
 
-   :term:`BB_HASHCONFIG_WHITELIST`
-      Lists variables that are excluded from base configuration checksum,
-      which is used to determine if the cache can be reused.
-
-      One of the ways BitBake determines whether to re-parse the main
-      metadata is through checksums of the variables in the datastore of
-      the base configuration data. There are variables that you typically
-      want to exclude when checking whether or not to re-parse and thus
-      rebuild the cache. As an example, you would usually exclude ``TIME``
-      and ``DATE`` because these variables are always changing. If you did
-      not exclude them, BitBake would never reuse the cache.
-
    :term:`BB_HASHBASE_WHITELIST`
       Lists variables that are excluded from checksum and dependency data.
       Variables that are excluded can therefore change without affecting
@@ -309,6 +298,18 @@
       However, the more accurate the data returned, the more efficient the
       build will be.
 
+   :term:`BB_HASHCONFIG_WHITELIST`
+      Lists variables that are excluded from base configuration checksum,
+      which is used to determine if the cache can be reused.
+
+      One of the ways BitBake determines whether to re-parse the main
+      metadata is through checksums of the variables in the datastore of
+      the base configuration data. There are variables that you typically
+      want to exclude when checking whether or not to re-parse and thus
+      rebuild the cache. As an example, you would usually exclude ``TIME``
+      and ``DATE`` because these variables are always changing. If you did
+      not exclude them, BitBake would never reuse the cache.
+
    :term:`BB_HASHSERVE`
       Specifies the Hash Equivalence server to use.
 
@@ -333,7 +334,7 @@
 
    :term:`BB_LOGFMT`
       Specifies the name of the log files saved into
-      ``${``\ :term:`T`\ ``}``. By default, the ``BB_LOGFMT``
+      ``${``\ :term:`T`\ ``}``. By default, the :term:`BB_LOGFMT`
       variable is undefined and the log file names get created using the
       following form::
 
@@ -357,15 +358,15 @@
       running builds when not connected to the Internet, and when operating
       in certain kinds of firewall environments.
 
+   :term:`BB_NUMBER_PARSE_THREADS`
+      Sets the number of threads BitBake uses when parsing. By default, the
+      number of threads is equal to the number of cores on the system.
+
    :term:`BB_NUMBER_THREADS`
       The maximum number of tasks BitBake should run in parallel at any one
       time. If your host development system supports multiple cores, a good
       rule of thumb is to set this variable to twice the number of cores.
 
-   :term:`BB_NUMBER_PARSE_THREADS`
-      Sets the number of threads BitBake uses when parsing. By default, the
-      number of threads is equal to the number of cores on the system.
-
    :term:`BB_ORIGENV`
       Contains a copy of the original external environment in which BitBake
       was run. The copy is taken before any whitelisted variable values are
@@ -388,7 +389,7 @@
    :term:`BB_RUNFMT`
       Specifies the name of the executable script files (i.e. run files)
       saved into ``${``\ :term:`T`\ ``}``. By default, the
-      ``BB_RUNFMT`` variable is undefined and the run file names get
+      :term:`BB_RUNFMT` variable is undefined and the run file names get
       created using the following form::
 
          run.{task}.{pid}
@@ -454,7 +455,7 @@
    :term:`BB_SRCREV_POLICY`
       Defines the behavior of the fetcher when it interacts with source
       control systems and dynamic source revisions. The
-      ``BB_SRCREV_POLICY`` variable is useful when working without a
+      :term:`BB_SRCREV_POLICY` variable is useful when working without a
       network.
 
       The variable can be set using one of two policies:
@@ -498,7 +499,7 @@
       Allows adjustment of a task's Input/Output priority. During
       Autobuilder testing, random failures can occur for tasks due to I/O
       starvation. These failures occur during various QEMU runtime
-      timeouts. You can use the ``BB_TASK_IONICE_LEVEL`` variable to adjust
+      timeouts. You can use the :term:`BB_TASK_IONICE_LEVEL` variable to adjust
       the I/O priority of these tasks.
 
       .. note::
@@ -572,13 +573,13 @@
 
       .. note::
 
-         Internally, the ``BBCLASSEXTEND`` mechanism generates recipe
+         Internally, the :term:`BBCLASSEXTEND` mechanism generates recipe
          variants by rewriting variable values and applying overrides such
          as ``_class-native``. For example, to generate a native version of
          a recipe, a :term:`DEPENDS` on "foo" is
-         rewritten to a ``DEPENDS`` on "foo-native".
+         rewritten to a :term:`DEPENDS` on "foo-native".
 
-         Even when using ``BBCLASSEXTEND``, the recipe is only parsed once.
+         Even when using :term:`BBCLASSEXTEND`, the recipe is only parsed once.
          Parsing once adds some limitations. For example, it is not
          possible to include a different file depending on the variant,
          since ``include`` statements are processed when the recipe is
@@ -614,14 +615,14 @@
       - effectively letting you control the precedence for the multiple
       layers. The precedence established through this variable stands
       regardless of a recipe's version (:term:`PV` variable).
-      For example, a layer that has a recipe with a higher ``PV`` value but
-      for which the ``BBFILE_PRIORITY`` is set to have a lower precedence
+      For example, a layer that has a recipe with a higher :term:`PV` value but
+      for which the :term:`BBFILE_PRIORITY` is set to have a lower precedence
       still has a lower precedence.
 
-      A larger value for the ``BBFILE_PRIORITY`` variable results in a
+      A larger value for the :term:`BBFILE_PRIORITY` variable results in a
       higher precedence. For example, the value 6 has a higher precedence
-      than the value 5. If not specified, the ``BBFILE_PRIORITY`` variable
-      is set based on layer dependencies (see the ``LAYERDEPENDS`` variable
+      than the value 5. If not specified, the :term:`BBFILE_PRIORITY` variable
+      is set based on layer dependencies (see the :term:`LAYERDEPENDS` variable
       for more information. The default priority, if unspecified for a
       layer with no dependencies, is the lowest defined priority + 1 (or 1
       if no priorities are defined).
@@ -644,7 +645,7 @@
       Activates content depending on presence of identified layers.  You
       identify the layers by the collections that the layers define.
 
-      Use the ``BBFILES_DYNAMIC`` variable to avoid ``.bbappend`` files whose
+      Use the :term:`BBFILES_DYNAMIC` variable to avoid ``.bbappend`` files whose
       corresponding ``.bb`` file is in a layer that attempts to modify other
       layers through ``.bbappend`` but does not want to introduce a hard
       dependency on those other layers.
@@ -653,7 +654,7 @@
       ``.bb`` files in case a layer is not present.  Use this avoid hard
       dependency on those other layers.
 
-      Use the following form for ``BBFILES_DYNAMIC``::
+      Use the following form for :term:`BBFILES_DYNAMIC`::
 
          collection_name:filename_pattern
 
@@ -690,7 +691,7 @@
    :term:`BBINCLUDELOGS_LINES`
       If :term:`BBINCLUDELOGS` is set, specifies
       the maximum number of lines from the task log file to print when
-      reporting a failed task. If you do not set ``BBINCLUDELOGS_LINES``,
+      reporting a failed task. If you do not set :term:`BBINCLUDELOGS_LINES`,
       the entire log is printed.
 
    :term:`BBLAYERS`
@@ -716,7 +717,7 @@
    :term:`BBMASK`
       Prevents BitBake from processing recipes and recipe append files.
 
-      You can use the ``BBMASK`` variable to "hide" these ``.bb`` and
+      You can use the :term:`BBMASK` variable to "hide" these ``.bb`` and
       ``.bbappend`` files. BitBake ignores any recipe or recipe append
       files that match any of the expressions. It is as if BitBake does not
       see them at all. Consequently, matching files are not parsed or
@@ -753,7 +754,7 @@
       Enables BitBake to perform multiple configuration builds and lists
       each separate configuration (multiconfig). You can use this variable
       to cause BitBake to build multiple targets where each target has a
-      separate configuration. Define ``BBMULTICONFIG`` in your
+      separate configuration. Define :term:`BBMULTICONFIG` in your
       ``conf/local.conf`` configuration file.
 
       As an example, the following line specifies three multiconfigs, each
@@ -765,7 +766,7 @@
       build directory within a directory named ``conf/multiconfig`` (e.g.
       build_directory\ ``/conf/multiconfig/configA.conf``).
 
-      For information on how to use ``BBMULTICONFIG`` in an environment
+      For information on how to use :term:`BBMULTICONFIG` in an environment
       that supports building targets with multiple configurations, see the
       ":ref:`bitbake-user-manual/bitbake-user-manual-intro:executing a multiple configuration build`"
       section.
@@ -776,7 +777,7 @@
       variable.
 
       If you run BitBake from a directory outside of the build directory,
-      you must be sure to set ``BBPATH`` to point to the build directory.
+      you must be sure to set :term:`BBPATH` to point to the build directory.
       Set the variable as you would any environment variable and then run
       BitBake::
 
@@ -823,7 +824,7 @@
       The most common usage of this is variable is to set it to "-1" within
       a recipe for a development version of a piece of software. Using the
       variable in this way causes the stable version of the recipe to build
-      by default in the absence of ``PREFERRED_VERSION`` being used to
+      by default in the absence of :term:`PREFERRED_VERSION` being used to
       build the development version.
 
       .. note::
@@ -836,7 +837,7 @@
       Lists a recipe's build-time dependencies (i.e. other recipe files).
 
       Consider this simple example for two recipes named "a" and "b" that
-      produce similarly named packages. In this example, the ``DEPENDS``
+      produce similarly named packages. In this example, the :term:`DEPENDS`
       statement appears in the "a" recipe::
 
          DEPENDS = "b"
@@ -854,7 +855,7 @@
 
    :term:`DL_DIR`
       The central download directory used by the build process to store
-      downloads. By default, ``DL_DIR`` gets files suitable for mirroring for
+      downloads. By default, :term:`DL_DIR` gets files suitable for mirroring for
       everything except Git repositories. If you want tarballs of Git
       repositories, use the :term:`BB_GENERATE_MIRROR_TARBALLS` variable.
 
@@ -869,14 +870,14 @@
 
       .. note::
 
-         Recipes added to ``EXCLUDE_FROM_WORLD`` may still be built during a world
+         Recipes added to :term:`EXCLUDE_FROM_WORLD` may still be built during a world
          build in order to satisfy dependencies of other recipes. Adding a
-         recipe to ``EXCLUDE_FROM_WORLD`` only ensures that the recipe is not
+         recipe to :term:`EXCLUDE_FROM_WORLD` only ensures that the recipe is not
          explicitly added to the list of build targets in a world build.
 
    :term:`FAKEROOT`
       Contains the command to use when running a shell script in a fakeroot
-      environment. The ``FAKEROOT`` variable is obsolete and has been
+      environment. The :term:`FAKEROOT` variable is obsolete and has been
       replaced by the other ``FAKEROOT*`` variables. See these entries in
       the glossary for more information.
 
@@ -939,9 +940,9 @@
       Causes the named class or classes to be inherited globally. Anonymous
       functions in the class or classes are not executed for the base
       configuration and in each individual recipe. The OpenEmbedded build
-      system ignores changes to ``INHERIT`` in individual recipes.
+      system ignores changes to :term:`INHERIT` in individual recipes.
 
-      For more information on ``INHERIT``, see the
+      For more information on :term:`INHERIT`, see the
       ":ref:`bitbake-user-manual/bitbake-user-manual-metadata:\`\`inherit\`\` configuration directive`"
       section.
 
@@ -989,7 +990,7 @@
       the build system searches for source code, it first tries the local
       download directory. If that location fails, the build system tries
       locations defined by :term:`PREMIRRORS`, the
-      upstream source, and then locations specified by ``MIRRORS`` in that
+      upstream source, and then locations specified by :term:`MIRRORS` in that
       order.
 
    :term:`MULTI_PROVIDER_WHITELIST`
@@ -1006,12 +1007,12 @@
       ``virtual/kernel``, and so forth).
 
    :term:`OVERRIDES`
-      BitBake uses ``OVERRIDES`` to control what variables are overridden
+      BitBake uses :term:`OVERRIDES` to control what variables are overridden
       after BitBake parses recipes and configuration files.
 
       Following is a simple example that uses an overrides list based on
       machine architectures: OVERRIDES = "arm:x86:mips:powerpc" You can
-      find information on how to use ``OVERRIDES`` in the
+      find information on how to use :term:`OVERRIDES` in the
       ":ref:`bitbake-user-manual/bitbake-user-manual-metadata:conditional syntax
       (overrides)`" section.
 
@@ -1025,11 +1026,11 @@
    :term:`PACKAGES_DYNAMIC`
       A promise that your recipe satisfies runtime dependencies for
       optional modules that are found in other recipes.
-      ``PACKAGES_DYNAMIC`` does not actually satisfy the dependencies, it
+      :term:`PACKAGES_DYNAMIC` does not actually satisfy the dependencies, it
       only states that they should be satisfied. For example, if a hard,
       runtime dependency (:term:`RDEPENDS`) of another
       package is satisfied during the build through the
-      ``PACKAGES_DYNAMIC`` variable, but a package with the module name is
+      :term:`PACKAGES_DYNAMIC` variable, but a package with the module name is
       never actually produced, then the other package will be broken.
 
    :term:`PE`
@@ -1068,8 +1069,8 @@
    :term:`PREFERRED_PROVIDERS`
       Determines which recipe should be given preference for cases where
       multiple recipes provide the same item. Functionally,
-      ``PREFERRED_PROVIDERS`` is identical to
-      :term:`PREFERRED_PROVIDER`. However, the ``PREFERRED_PROVIDERS`` variable
+      :term:`PREFERRED_PROVIDERS` is identical to
+      :term:`PREFERRED_PROVIDER`. However, the :term:`PREFERRED_PROVIDERS` variable
       lets you define preferences for multiple situations using the following
       form::
 
@@ -1087,7 +1088,7 @@
       select, and you should set :term:`PV` accordingly for
       precedence.
 
-      The ``PREFERRED_VERSION`` variable supports limited wildcard use
+      The :term:`PREFERRED_VERSION` variable supports limited wildcard use
       through the "``%``" character. You can use the character to match any
       number of characters, which can be useful when specifying versions
       that contain long revision numbers that potentially change. Here are
@@ -1110,14 +1111,14 @@
       Specifies additional paths from which BitBake gets source code. When
       the build system searches for source code, it first tries the local
       download directory. If that location fails, the build system tries
-      locations defined by ``PREMIRRORS``, the upstream source, and then
+      locations defined by :term:`PREMIRRORS`, the upstream source, and then
       locations specified by :term:`MIRRORS` in that order.
 
       Typically, you would add a specific server for the build system to
       attempt before any others by adding something like the following to
       your configuration::
 
-         PREMIRRORS_prepend = "\
+         PREMIRRORS:prepend = "\
          git://.*/.* http://www.yoctoproject.org/sources/ \n \
          ftp://.*/.* http://www.yoctoproject.org/sources/ \n \
          http://.*/.* http://www.yoctoproject.org/sources/ \n \
@@ -1130,25 +1131,25 @@
 
    :term:`PROVIDES`
       A list of aliases by which a particular recipe can be known. By
-      default, a recipe's own ``PN`` is implicitly already in its
-      ``PROVIDES`` list. If a recipe uses ``PROVIDES``, the additional
+      default, a recipe's own :term:`PN` is implicitly already in its
+      :term:`PROVIDES` list. If a recipe uses :term:`PROVIDES`, the additional
       aliases are synonyms for the recipe and can be useful satisfying
       dependencies of other recipes during the build as specified by
-      ``DEPENDS``.
+      :term:`DEPENDS`.
 
-      Consider the following example ``PROVIDES`` statement from a recipe
+      Consider the following example :term:`PROVIDES` statement from a recipe
       file ``libav_0.8.11.bb``::
 
          PROVIDES += "libpostproc"
 
-      The ``PROVIDES`` statement results in the "libav" recipe also being known
+      The :term:`PROVIDES` statement results in the "libav" recipe also being known
       as "libpostproc".
 
       In addition to providing recipes under alternate names, the
-      ``PROVIDES`` mechanism is also used to implement virtual targets. A
+      :term:`PROVIDES` mechanism is also used to implement virtual targets. A
       virtual target is a name that corresponds to some particular
       functionality (e.g. a Linux kernel). Recipes that provide the
-      functionality in question list the virtual target in ``PROVIDES``.
+      functionality in question list the virtual target in :term:`PROVIDES`.
       Recipes that depend on the functionality in question can include the
       virtual target in :term:`DEPENDS` to leave the
       choice of provider open.
@@ -1160,12 +1161,12 @@
    :term:`PRSERV_HOST`
       The network based :term:`PR` service host and port.
 
-      Following is an example of how the ``PRSERV_HOST`` variable is set::
+      Following is an example of how the :term:`PRSERV_HOST` variable is set::
 
          PRSERV_HOST = "localhost:0"
 
       You must set the variable if you want to automatically start a local PR
-      service. You can set ``PRSERV_HOST`` to other values to use a remote PR
+      service. You can set :term:`PRSERV_HOST` to other values to use a remote PR
       service.
 
    :term:`PV`
@@ -1177,24 +1178,24 @@
       a package in this list cannot be found during the build, you will get
       a build error.
 
-      Because the ``RDEPENDS`` variable applies to packages being built,
+      Because the :term:`RDEPENDS` variable applies to packages being built,
       you should always use the variable in a form with an attached package
       name. For example, suppose you are building a development package
       that depends on the ``perl`` package. In this case, you would use the
-      following ``RDEPENDS`` statement::
+      following :term:`RDEPENDS` statement::
 
-         RDEPENDS_${PN}-dev += "perl"
+         RDEPENDS:${PN}-dev += "perl"
 
       In the example, the development package depends on the ``perl`` package.
-      Thus, the ``RDEPENDS`` variable has the ``${PN}-dev`` package name as part
+      Thus, the :term:`RDEPENDS` variable has the ``${PN}-dev`` package name as part
       of the variable.
 
       BitBake supports specifying versioned dependencies. Although the
       syntax varies depending on the packaging format, BitBake hides these
       differences from you. Here is the general syntax to specify versions
-      with the ``RDEPENDS`` variable::
+      with the :term:`RDEPENDS` variable::
 
-         RDEPENDS_${PN} = "package (operator version)"
+         RDEPENDS:${PN} = "package (operator version)"
 
       For ``operator``, you can specify the following::
 
@@ -1207,7 +1208,7 @@
       For example, the following sets up a dependency on version 1.2 or
       greater of the package ``foo``::
 
-         RDEPENDS_${PN} = "foo (>= 1.2)"
+         RDEPENDS:${PN} = "foo (>= 1.2)"
 
       For information on build-time dependencies, see the :term:`DEPENDS`
       variable.
@@ -1218,39 +1219,39 @@
 
    :term:`REQUIRED_VERSION`
       If there are multiple versions of a recipe available, this variable
-      determines which version should be given preference. ``REQUIRED_VERSION``
+      determines which version should be given preference. :term:`REQUIRED_VERSION`
       works in exactly the same manner as :term:`PREFERRED_VERSION`, except
       that if the specified version is not available then an error message
       is shown and the build fails immediately.
 
-      If both ``REQUIRED_VERSION`` and ``PREFERRED_VERSION`` are set for
-      the same recipe, the ``REQUIRED_VERSION`` value applies.
+      If both :term:`REQUIRED_VERSION` and :term:`PREFERRED_VERSION` are set for
+      the same recipe, the :term:`REQUIRED_VERSION` value applies.
 
    :term:`RPROVIDES`
       A list of package name aliases that a package also provides. These
       aliases are useful for satisfying runtime dependencies of other
       packages both during the build and on the target (as specified by
-      ``RDEPENDS``).
+      :term:`RDEPENDS`).
 
       As with all package-controlling variables, you must always use the
       variable in conjunction with a package name override. Here is an
       example::
 
-         RPROVIDES_${PN} = "widget-abi-2"
+         RPROVIDES:${PN} = "widget-abi-2"
 
    :term:`RRECOMMENDS`
       A list of packages that extends the usability of a package being
       built. The package being built does not depend on this list of
       packages in order to successfully build, but needs them for the
       extended usability. To specify runtime dependencies for packages, see
-      the ``RDEPENDS`` variable.
+      the :term:`RDEPENDS` variable.
 
       BitBake supports specifying versioned recommends. Although the syntax
       varies depending on the packaging format, BitBake hides these
       differences from you. Here is the general syntax to specify versions
-      with the ``RRECOMMENDS`` variable::
+      with the :term:`RRECOMMENDS` variable::
 
-         RRECOMMENDS_${PN} = "package (operator version)"
+         RRECOMMENDS:${PN} = "package (operator version)"
 
       For ``operator``, you can specify the following::
 
@@ -1263,7 +1264,7 @@
       For example, the following sets up a recommend on version
       1.2 or greater of the package ``foo``::
 
-         RRECOMMENDS_${PN} = "foo (>= 1.2)"
+         RRECOMMENDS:${PN} = "foo (>= 1.2)"
 
    :term:`SECTION`
       The section in which packages should be categorized.
@@ -1272,10 +1273,10 @@
       The list of source files - local or remote. This variable tells
       BitBake which bits to pull for the build and how to pull them. For
       example, if the recipe or append file needs to fetch a single tarball
-      from the Internet, the recipe or append file uses a ``SRC_URI`` entry
+      from the Internet, the recipe or append file uses a :term:`SRC_URI` entry
       that specifies that tarball. On the other hand, if the recipe or
       append file needs to fetch a tarball and include a custom file, the
-      recipe or append file needs an ``SRC_URI`` variable that specifies
+      recipe or append file needs an :term:`SRC_URI` variable that specifies
       all those sources.
 
       The following list explains the available URI protocols:
@@ -1328,8 +1329,8 @@
          subdirectory within the archive.
 
       -  ``name`` : Specifies a name to be used for association with
-         ``SRC_URI`` checksums when you have more than one file specified
-         in ``SRC_URI``.
+         :term:`SRC_URI` checksums when you have more than one file specified
+         in :term:`SRC_URI`.
 
       -  ``downloadfilename`` : Specifies the filename used when storing
          the downloaded file.
@@ -1344,7 +1345,7 @@
       variable applies only when using Subversion, Git, Mercurial and
       Bazaar. If you want to build a fixed revision and you want to avoid
       performing a query on the remote repository every time BitBake parses
-      your recipe, you should specify a ``SRCREV`` that is a full revision
+      your recipe, you should specify a :term:`SRCREV` that is a full revision
       identifier and not just a tag.
 
    :term:`SRCREV_FORMAT`
@@ -1353,10 +1354,10 @@
       :term:`SRC_URI`.
 
       The system needs help constructing these values under these
-      circumstances. Each component in the ``SRC_URI`` is assigned a name
-      and these are referenced in the ``SRCREV_FORMAT`` variable. Consider
+      circumstances. Each component in the :term:`SRC_URI` is assigned a name
+      and these are referenced in the :term:`SRCREV_FORMAT` variable. Consider
       an example with URLs named "machine" and "meta". In this case,
-      ``SRCREV_FORMAT`` could look like "machine_meta" and those names
+      :term:`SRCREV_FORMAT` could look like "machine_meta" and those names
       would have the SCM versions substituted into each position. Only one
       ``AUTOINC`` placeholder is added and if needed. And, this placeholder
       is placed at the start of the returned string.
@@ -1368,7 +1369,7 @@
 
    :term:`STAMPCLEAN`
       Specifies the base path used to create recipe stamp files. Unlike the
-      :term:`STAMP` variable, ``STAMPCLEAN`` can contain
+      :term:`STAMP` variable, :term:`STAMPCLEAN` can contain
       wildcards to match the range of files a clean operation should
       remove. BitBake uses a clean operation to remove any other stamps it
       should be removing when creating a new stamp.