diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-execution.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-execution.rst
index 84d65fa..a6ef90d 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-execution.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-execution.rst
@@ -40,7 +40,7 @@
    the number of processors, which takes into account hyper-threading.
    Thus, a quad-core build host with hyper-threading most likely shows
    eight processors, which is the value you would then assign to
-   ``BB_NUMBER_THREADS``.
+   :term:`BB_NUMBER_THREADS`.
 
    A possibly simpler solution is that some Linux distributions (e.g.
    Debian and Ubuntu) provide the ``ncpus`` command.
@@ -65,13 +65,13 @@
 
 The ``layer.conf`` files are used to construct key variables such as
 :term:`BBPATH` and :term:`BBFILES`.
-``BBPATH`` is used to search for configuration and class files under the
-``conf`` and ``classes`` directories, respectively. ``BBFILES`` is used
+:term:`BBPATH` is used to search for configuration and class files under the
+``conf`` and ``classes`` directories, respectively. :term:`BBFILES` is used
 to locate both recipe and recipe append files (``.bb`` and
 ``.bbappend``). If there is no ``bblayers.conf`` file, it is assumed the
-user has set the ``BBPATH`` and ``BBFILES`` directly in the environment.
+user has set the :term:`BBPATH` and :term:`BBFILES` directly in the environment.
 
-Next, the ``bitbake.conf`` file is located using the ``BBPATH`` variable
+Next, the ``bitbake.conf`` file is located using the :term:`BBPATH` variable
 that was just constructed. The ``bitbake.conf`` file may also include
 other configuration files using the ``include`` or ``require``
 directives.
@@ -104,7 +104,7 @@
 contain a :term:`BBLAYERS` variable that is a
 space-delimited list of 'layer' directories. Recall that if BitBake
 cannot find a ``bblayers.conf`` file, then it is assumed the user has
-set the ``BBPATH`` and ``BBFILES`` variables directly in the
+set the :term:`BBPATH` and :term:`BBFILES` variables directly in the
 environment.
 
 For each directory (layer) in this list, a ``conf/layer.conf`` file is
@@ -114,7 +114,7 @@
 variables correctly for a given build directory.
 
 BitBake then expects to find the ``conf/bitbake.conf`` file somewhere in
-the user-specified ``BBPATH``. That configuration file generally has
+the user-specified :term:`BBPATH`. That configuration file generally has
 include directives to pull in any other metadata such as files specific
 to the architecture, the machine, the local environment, and so forth.
 
@@ -135,7 +135,7 @@
 specified in the configuration using the
 :term:`INHERIT` variable are also included. BitBake
 searches for class files in a ``classes`` subdirectory under the paths
-in ``BBPATH`` in the same way as configuration files.
+in :term:`BBPATH` in the same way as configuration files.
 
 A good way to get an idea of the configuration files and the class files
 used in your execution environment is to run the following BitBake
@@ -184,13 +184,13 @@
 During the configuration phase, BitBake will have set
 :term:`BBFILES`. BitBake now uses it to construct a
 list of recipes to parse, along with any append files (``.bbappend``) to
-apply. ``BBFILES`` is a space-separated list of available files and
+apply. :term:`BBFILES` is a space-separated list of available files and
 supports wildcards. An example would be::
 
   BBFILES = "/path/to/bbfiles/*.bb /path/to/appends/*.bbappend"
 
 BitBake parses each
-recipe and append file located with ``BBFILES`` and stores the values of
+recipe and append file located with :term:`BBFILES` and stores the values of
 various variables into the datastore.
 
 .. note::
@@ -201,7 +201,7 @@
 recipe is parsed line by line. Any inherit statements cause BitBake to
 find and then parse class files (``.bbclass``) using
 :term:`BBPATH` as the search path. Finally, BitBake
-parses in order any append files found in ``BBFILES``.
+parses in order any append files found in :term:`BBFILES`.
 
 One common convention is to use the recipe filename to define pieces of
 metadata. For example, in ``bitbake.conf`` the recipe name and version
@@ -212,7 +212,7 @@
    PV = "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE', False),d)[1] or '1.0'}"
 
 In this example, a recipe called "something_1.2.3.bb" would set
-``PN`` to "something" and ``PV`` to "1.2.3".
+:term:`PN` to "something" and :term:`PV` to "1.2.3".
 
 By the time parsing is complete for a recipe, BitBake has a list of
 tasks that the recipe defines and a set of data consisting of keys and
@@ -260,21 +260,21 @@
 
 Assuming BitBake has been instructed to execute a target and that all
 the recipe files have been parsed, BitBake starts to figure out how to
-build the target. BitBake looks through the ``PROVIDES`` list for each
-of the recipes. A ``PROVIDES`` list is the list of names by which the
-recipe can be known. Each recipe's ``PROVIDES`` list is created
+build the target. BitBake looks through the :term:`PROVIDES` list for each
+of the recipes. A :term:`PROVIDES` list is the list of names by which the
+recipe can be known. Each recipe's :term:`PROVIDES` list is created
 implicitly through the recipe's :term:`PN` variable and
 explicitly through the recipe's :term:`PROVIDES`
 variable, which is optional.
 
-When a recipe uses ``PROVIDES``, that recipe's functionality can be
-found under an alternative name or names other than the implicit ``PN``
+When a recipe uses :term:`PROVIDES`, that recipe's functionality can be
+found under an alternative name or names other than the implicit :term:`PN`
 name. As an example, suppose a recipe named ``keyboard_1.0.bb``
 contained the following::
 
   PROVIDES += "fullkeyboard"
 
-The ``PROVIDES``
+The :term:`PROVIDES`
 list for this recipe becomes "keyboard", which is implicit, and
 "fullkeyboard", which is explicit. Consequently, the functionality found
 in ``keyboard_1.0.bb`` can be found under two different names.
@@ -284,12 +284,12 @@
 Preferences
 ===========
 
-The ``PROVIDES`` list is only part of the solution for figuring out a
+The :term:`PROVIDES` list is only part of the solution for figuring out a
 target's recipes. Because targets might have multiple providers, BitBake
 needs to prioritize providers by determining provider preferences.
 
 A common example in which a target has multiple providers is
-"virtual/kernel", which is on the ``PROVIDES`` list for each kernel
+"virtual/kernel", which is on the :term:`PROVIDES` list for each kernel
 recipe. Each machine often selects the best kernel provider by using a
 line similar to the following in the machine configuration file::
 
@@ -309,10 +309,10 @@
 :term:`DEFAULT_PREFERENCE` variable.
 
 By default, files have a preference of "0". Setting
-``DEFAULT_PREFERENCE`` to "-1" makes the recipe unlikely to be used
-unless it is explicitly referenced. Setting ``DEFAULT_PREFERENCE`` to
-"1" makes it likely the recipe is used. ``PREFERRED_VERSION`` overrides
-any ``DEFAULT_PREFERENCE`` setting. ``DEFAULT_PREFERENCE`` is often used
+:term:`DEFAULT_PREFERENCE` to "-1" makes the recipe unlikely to be used
+unless it is explicitly referenced. Setting :term:`DEFAULT_PREFERENCE` to
+"1" makes it likely the recipe is used. :term:`PREFERRED_VERSION` overrides
+any :term:`DEFAULT_PREFERENCE` setting. :term:`DEFAULT_PREFERENCE` is often used
 to mark newer and more experimental recipe versions until they have
 undergone sufficient testing to be considered stable.
 
@@ -394,7 +394,7 @@
 thread threshold has not been exceeded.
 
 It is worth noting that you can greatly speed up the build time by
-properly setting the ``BB_NUMBER_THREADS`` variable.
+properly setting the :term:`BB_NUMBER_THREADS` variable.
 
 As each task completes, a timestamp is written to the directory
 specified by the :term:`STAMP` variable. On subsequent
@@ -561,7 +561,7 @@
 
   BB_SIGNATURE_HANDLER ?= "OEBasicHash"
 
-The "OEBasicHash" ``BB_SIGNATURE_HANDLER`` is the same as the "OEBasic"
+The "OEBasicHash" :term:`BB_SIGNATURE_HANDLER` is the same as the "OEBasic"
 version but adds the task hash to the stamp files. This results in any
 metadata change that changes the task hash, automatically causing the
 task to be run again. This removes the need to bump
@@ -581,7 +581,7 @@
 -  ``BBHASHDEPS_``\ *filename:taskname*: The task dependencies for
    each task.
 
--  ``BB_TASKHASH``: The hash of the currently running task.
+-  :term:`BB_TASKHASH`: The hash of the currently running task.
 
 It is worth noting that BitBake's "-S" option lets you debug BitBake's
 processing of signatures. The options passed to -S allow different
diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst
index bd1fb4f..593de61 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst
@@ -51,7 +51,7 @@
    examine the OpenEmbedded class file ``base.bbclass``
    .
 
-The ``SRC_URI`` and ``WORKDIR`` variables are not hardcoded into the
+The :term:`SRC_URI` and ``WORKDIR`` variables are not hardcoded into the
 fetcher, since those fetcher methods can be (and are) called with
 different variable names. In OpenEmbedded for example, the shared state
 (sstate) code uses the fetch module to fetch the sstate files.
@@ -64,14 +64,14 @@
    :term:`PREMIRRORS` variable.
 
 -  *Source URI:* If pre-mirrors fail, BitBake uses the original URL (e.g
-   from ``SRC_URI``).
+   from :term:`SRC_URI`).
 
 -  *Mirror Sites:* If fetch failures occur, BitBake next uses mirror
    locations as defined by the :term:`MIRRORS` variable.
 
 For each URL passed to the fetcher, the fetcher calls the submodule that
 handles that particular URL type. This behavior can be the source of
-some confusion when you are providing URLs for the ``SRC_URI`` variable.
+some confusion when you are providing URLs for the :term:`SRC_URI` variable.
 Consider the following two URLs::
 
    http://git.yoctoproject.org/git/poky;protocol=git
@@ -110,14 +110,14 @@
 File integrity is of key importance for reproducing builds. For
 non-local archive downloads, the fetcher code can verify SHA-256 and MD5
 checksums to ensure the archives have been downloaded correctly. You can
-specify these checksums by using the ``SRC_URI`` variable with the
+specify these checksums by using the :term:`SRC_URI` variable with the
 appropriate varflags as follows::
 
    SRC_URI[md5sum] = "value"
    SRC_URI[sha256sum] = "value"
 
 You can also specify the checksums as
-parameters on the ``SRC_URI`` as shown below::
+parameters on the :term:`SRC_URI` as shown below::
 
   SRC_URI = "http://example.com/foobar.tar.bz2;md5sum=4a8e0f237e961fd7785d19d07fdb994d"
 
@@ -129,7 +129,7 @@
    SRC_URI[foo.md5sum] = 4a8e0f237e961fd7785d19d07fdb994d
 
 After a file has been downloaded and
-has had its checksum checked, a ".done" stamp is placed in ``DL_DIR``.
+has had its checksum checked, a ".done" stamp is placed in :term:`DL_DIR`.
 BitBake uses this stamp during subsequent builds to avoid downloading or
 comparing a checksum for the file again.
 
@@ -438,7 +438,7 @@
 .. note::
 
    Specifying passwords directly in ``git://`` urls is not supported.
-   There are several reasons: ``SRC_URI`` is often written out to logs and
+   There are several reasons: :term:`SRC_URI` is often written out to logs and
    other places, and that could easily leak passwords; it is also all too
    easy to share metadata without removing passwords. SSH keys, ``~/.netrc``
    and ``~/.ssh/config`` files can be used as alternatives.
@@ -487,7 +487,7 @@
 The fetcher uses the ``rcleartool`` or
 ``cleartool`` remote client, depending on which one is available.
 
-Following are options for the ``SRC_URI`` statement:
+Following are options for the :term:`SRC_URI` statement:
 
 -  *vob*: The name, which must include the prepending "/" character,
    of the ClearCase VOB. This option is required.
@@ -549,7 +549,7 @@
 you choose not to use ``P4CONFIG``, or to explicitly set variables that
 ``P4CONFIG`` can contain, you can specify the ``P4PORT`` value, which is
 the server's URL and port number, and you can specify a username and
-password directly in your recipe within ``SRC_URI``.
+password directly in your recipe within :term:`SRC_URI`.
 
 Here is an example that relies on ``P4CONFIG`` to specify the server URL
 and port, username, and password, and fetches the Head Revision::
@@ -680,4 +680,4 @@
 Auto Revisions
 ==============
 
-We need to document ``AUTOREV`` and ``SRCREV_FORMAT`` here.
+We need to document ``AUTOREV`` and :term:`SRCREV_FORMAT` here.
diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst
index a9c3370..c5a4ce6 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst
@@ -145,23 +145,23 @@
 
     The majority of this output is specific to environment variables that
     are not directly relevant to BitBake. However, the very first
-    message regarding the ``BBPATH`` variable and the
+    message regarding the :term:`BBPATH` variable and the
     ``conf/bblayers.conf`` file is relevant.
 
     When you run BitBake, it begins looking for metadata files. The
     :term:`BBPATH` variable is what tells BitBake where
-    to look for those files. ``BBPATH`` is not set and you need to set
-    it. Without ``BBPATH``, BitBake cannot find any configuration files
+    to look for those files. :term:`BBPATH` is not set and you need to set
+    it. Without :term:`BBPATH`, BitBake cannot find any configuration files
     (``.conf``) or recipe files (``.bb``) at all. BitBake also cannot
     find the ``bitbake.conf`` file.
 
-#.  **Setting BBPATH:** For this example, you can set ``BBPATH`` in
+#.  **Setting BBPATH:** For this example, you can set :term:`BBPATH` in
     the same manner that you set ``PATH`` earlier in the appendix. You
     should realize, though, that it is much more flexible to set the
-    ``BBPATH`` variable up in a configuration file for each project.
+    :term:`BBPATH` variable up in a configuration file for each project.
 
     From your shell, enter the following commands to set and export the
-    ``BBPATH`` variable::
+    :term:`BBPATH` variable::
 
       $ BBPATH="projectdirectory"
       $ export BBPATH
@@ -175,7 +175,7 @@
        ("~") character as BitBake does not expand that character as the
        shell would.
 
-#.  **Run BitBake:** Now that you have ``BBPATH`` defined, run the
+#.  **Run BitBake:** Now that you have :term:`BBPATH` defined, run the
     ``bitbake`` command again::
 
        $ bitbake
diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-intro.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-intro.rst
index b3cea61..76c8e3d 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-intro.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-intro.rst
@@ -27,7 +27,7 @@
 Conceptually, BitBake is similar to GNU Make in some regards but has
 significant differences:
 
--  BitBake executes tasks according to provided metadata that builds up
+-  BitBake executes tasks according to the provided metadata that builds up
    the tasks. Metadata is stored in recipe (``.bb``) and related recipe
    "append" (``.bbappend``) files, configuration (``.conf``) and
    underlying include (``.inc``) files, and in class (``.bbclass``)
@@ -417,8 +417,8 @@
      -l DEBUG_DOMAINS, --log-domains=DEBUG_DOMAINS
                            Show debug logging for the specified logging domains
      -P, --profile         Profile the command and save reports.
-     -u UI, --ui=UI        The user interface to use (knotty, ncurses or taskexp
-                           - default knotty).
+     -u UI, --ui=UI        The user interface to use (knotty, ncurses, taskexp or
+                           teamcity - default knotty).
      --token=XMLRPCTOKEN   Specify the connection token to be used when
                            connecting to a remote server.
      --revisions-changed   Set the exit code depending on whether upstream
@@ -433,6 +433,9 @@
                            Environment variable BB_SERVER_TIMEOUT.
      --no-setscene         Do not run any setscene tasks. sstate will be ignored
                            and everything needed, built.
+     --skip-setscene       Skip setscene tasks if they would be executed. Tasks
+                           previously restored from sstate will be kept, unlike
+                           --no-setscene
      --setscene-only       Only run setscene tasks, don't run any real tasks.
      --remote-server=REMOTE_SERVER
                            Connect to the specified server.
@@ -537,7 +540,7 @@
 To stop depending on common depends, use the "-I" depend option and
 BitBake omits them from the graph. Leaving this information out can
 produce more readable graphs. This way, you can remove from the graph
-``DEPENDS`` from inherited classes such as ``base.bbclass``.
+:term:`DEPENDS` from inherited classes such as ``base.bbclass``.
 
 Here are two examples that create dependency graphs. The second example
 omits depends common in OpenEmbedded from the graph::
@@ -564,7 +567,7 @@
 .. image:: figures/bb_multiconfig_files.png
    :align: center
 
-The reason for this required file hierarchy is because the ``BBPATH``
+The reason for this required file hierarchy is because the :term:`BBPATH`
 variable is not constructed until the layers are parsed. Consequently,
 using the configuration file as a pre-configuration file is not possible
 unless it is located in the current working directory.
diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-metadata.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-metadata.rst
index 20c330e..b0494d0 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-metadata.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-metadata.rst
@@ -91,9 +91,10 @@
       Variables that are exported to the environment are preceded by the
       string "export" in the command's output.
 
--  For recipe changes, use the following::
+-  To find changes to a given variable in a specific recipe, use the
+   following::
 
-      $ bitbake recipe -e \| grep VARIABLE="
+      $ bitbake recipename -e | grep VARIABLENAME=\"
 
    This command checks to see if the variable actually makes
    it into a specific recipe.
@@ -225,7 +226,7 @@
    C := "${C}append"
 
 In this example, ``A`` contains "test 123", even though the final value
-of ``T`` is "456". The variable ``B`` will end up containing "456
+of :term:`T` is "456". The variable :term:`B` will end up containing "456
 cvalappend". This is because references to undefined variables are
 preserved as is during (immediate)expansion. This is in contrast to GNU
 Make, where undefined variables expand to nothing. The variable ``C``
@@ -248,7 +249,7 @@
    C = "cval"
    C =+ "test"
 
-The variable ``B`` contains "bval additionaldata" and ``C`` contains "test
+The variable :term:`B` contains "bval additionaldata" and ``C`` contains "test
 cval".
 
 .. _appending-and-prepending-without-spaces:
@@ -267,7 +268,7 @@
    C = "cval"
    C =. "test"
 
-The variable ``B`` contains "bvaladditionaldata" and ``C`` contains
+The variable :term:`B` contains "bvaladditionaldata" and ``C`` contains
 "testcval".
 
 Appending and Prepending (Override Style Syntax)
@@ -281,13 +282,13 @@
 rather than being immediately applied. Here are some examples::
 
    B = "bval"
-   B_append = " additional data"
+   B:append = " additional data"
    C = "cval"
-   C_prepend = "additional data "
+   C:prepend = "additional data "
    D = "dval"
-   D_append = "additional data"
+   D:append = "additional data"
 
-The variable ``B``
+The variable :term:`B`
 becomes "bval additional data" and ``C`` becomes "additional data cval".
 The variable ``D`` becomes "dvaladditional data".
 
@@ -312,10 +313,10 @@
 Surrounding spaces and spacing are preserved. Here is an example::
 
    FOO = "123 456 789 123456 123 456 123 456"
-   FOO_remove = "123"
-   FOO_remove = "456"
+   FOO:remove = "123"
+   FOO:remove = "456"
    FOO2 = " abc def ghi abcdef abc def abc def def"
-   FOO2_remove = "\
+   FOO2:remove = "\
        def \
        abc \
        ghi \
@@ -324,14 +325,14 @@
 The variable ``FOO`` becomes
 "  789 123456    " and ``FOO2`` becomes "    abcdef     ".
 
-Like "_append" and "_prepend", "_remove" is applied at variable
+Like ":append" and ":prepend", ":remove" is applied at variable
 expansion time.
 
 Override Style Operation Advantages
 -----------------------------------
 
-An advantage of the override style operations "_append", "_prepend", and
-"_remove" as compared to the "+=" and "=+" operators is that the
+An advantage of the override style operations ":append", ":prepend", and
+":remove" as compared to the "+=" and "=+" operators is that the
 override style operators provide guaranteed operations. For example,
 consider a class ``foo.bbclass`` that needs to add the value "val" to
 the variable ``FOO``, and a recipe that uses ``foo.bbclass`` as follows::
@@ -346,18 +347,18 @@
    FOO += "val"
 
 If, on the other hand, ``foo.bbclass``
-uses the "_append" operator, then the final value of ``FOO`` will be
+uses the ":append" operator, then the final value of ``FOO`` will be
 "initial val", as intended::
 
-   FOO_append = " val"
+   FOO:append = " val"
 
 .. note::
 
-   It is never necessary to use "+=" together with "_append". The following
+   It is never necessary to use "+=" together with ":append". The following
    sequence of assignments appends "barbaz" to FOO::
 
-       FOO_append = "bar"
-       FOO_append = "baz"
+       FOO:append = "bar"
+       FOO:append = "baz"
 
 
    The only effect of changing the second assignment in the previous
@@ -378,8 +379,8 @@
 
 You can define, append, and prepend values to variable flags. All the
 standard syntax operations previously mentioned work for variable flags
-except for override style syntax (i.e. "_prepend", "_append", and
-"_remove").
+except for override style syntax (i.e. ":prepend", ":append", and
+":remove").
 
 Here are some examples showing how to set variable flags::
 
@@ -496,14 +497,14 @@
 
 BitBake uses :term:`OVERRIDES` to control what
 variables are overridden after BitBake parses recipes and configuration
-files. This section describes how you can use ``OVERRIDES`` as
+files. This section describes how you can use :term:`OVERRIDES` as
 conditional metadata, talks about key expansion in relationship to
-``OVERRIDES``, and provides some examples to help with understanding.
+:term:`OVERRIDES`, and provides some examples to help with understanding.
 
 Conditional Metadata
 --------------------
 
-You can use ``OVERRIDES`` to conditionally select a specific version of
+You can use :term:`OVERRIDES` to conditionally select a specific version of
 a variable and to conditionally append or prepend the value of a
 variable.
 
@@ -513,10 +514,10 @@
    underscores are not permitted in override names as they are used to
    separate overrides from each other and from the variable name.
 
--  *Selecting a Variable:* The ``OVERRIDES`` variable is a
+-  *Selecting a Variable:* The :term:`OVERRIDES` variable is a
    colon-character-separated list that contains items for which you want
    to satisfy conditions. Thus, if you have a variable that is
-   conditional on "arm", and "arm" is in ``OVERRIDES``, then the
+   conditional on "arm", and "arm" is in :term:`OVERRIDES`, then the
    "arm"-specific version of the variable is used rather than the
    non-conditional version. Here is an example::
 
@@ -525,7 +526,7 @@
       TEST_os = "osspecific"
       TEST_nooverride = "othercondvalue"
 
-   In this example, the ``OVERRIDES``
+   In this example, the :term:`OVERRIDES`
    variable lists three overrides: "architecture", "os", and "machine".
    The variable ``TEST`` by itself has a default value of "default". You
    select the os-specific version of the ``TEST`` variable by appending
@@ -538,36 +539,36 @@
    that value based on the architecture of the build::
 
       KBRANCH = "standard/base"
-      KBRANCH_qemuarm = "standard/arm-versatile-926ejs"
-      KBRANCH_qemumips = "standard/mti-malta32"
-      KBRANCH_qemuppc = "standard/qemuppc"
-      KBRANCH_qemux86 = "standard/common-pc/base"
-      KBRANCH_qemux86-64 = "standard/common-pc-64/base"
-      KBRANCH_qemumips64 = "standard/mti-malta64"
+      KBRANCH:qemuarm = "standard/arm-versatile-926ejs"
+      KBRANCH:qemumips = "standard/mti-malta32"
+      KBRANCH:qemuppc = "standard/qemuppc"
+      KBRANCH:qemux86 = "standard/common-pc/base"
+      KBRANCH:qemux86-64 = "standard/common-pc-64/base"
+      KBRANCH:qemumips64 = "standard/mti-malta64"
 
 -  *Appending and Prepending:* BitBake also supports append and prepend
    operations to variable values based on whether a specific item is
-   listed in ``OVERRIDES``. Here is an example::
+   listed in :term:`OVERRIDES`. Here is an example::
 
       DEPENDS = "glibc ncurses"
       OVERRIDES = "machine:local"
-      DEPENDS_append_machine = "libmad"
+      DEPENDS:append:machine = "libmad"
 
-   In this example, ``DEPENDS`` becomes "glibc ncurses libmad".
+   In this example, :term:`DEPENDS` becomes "glibc ncurses libmad".
 
    Again, using an OpenEmbedded metadata-based kernel recipe file as an
    example, the following lines will conditionally append to the
    ``KERNEL_FEATURES`` variable based on the architecture::
 
-      KERNEL_FEATURES_append = " ${KERNEL_EXTRA_FEATURES}"
-      KERNEL_FEATURES_append_qemux86=" cfg/sound.scc cfg/paravirt_kvm.scc"
-      KERNEL_FEATURES_append_qemux86-64=" cfg/sound.scc cfg/paravirt_kvm.scc"
+      KERNEL_FEATURES:append = " ${KERNEL_EXTRA_FEATURES}"
+      KERNEL_FEATURES:append:qemux86=" cfg/sound.scc cfg/paravirt_kvm.scc"
+      KERNEL_FEATURES:append:qemux86-64=" cfg/sound.scc cfg/paravirt_kvm.scc"
 
 -  *Setting a Variable for a Single Task:* BitBake supports setting a
    variable just for the duration of a single task. Here is an example::
 
       FOO_task-configure = "val 1"
-      FOO_task-compile = "val 2"
+      FOO:task-compile = "val 2"
 
    In the
    previous example, ``FOO`` has the value "val 1" while the
@@ -580,9 +581,9 @@
    ``do_compile`` task.
 
    You can also use this syntax with other combinations (e.g.
-   "``_prepend``") as shown in the following example::
+   "``:prepend``") as shown in the following example::
 
-      EXTRA_OEMAKE_prepend_task-compile = "${PARALLEL_MAKE} "
+      EXTRA_OEMAKE:prepend:task-compile = "${PARALLEL_MAKE} "
 
 Key Expansion
 -------------
@@ -612,33 +613,33 @@
 
 There is often confusion concerning the order in which overrides and
 various "append" operators take effect. Recall that an append or prepend
-operation using "_append" and "_prepend" does not result in an immediate
+operation using ":append" and ":prepend" does not result in an immediate
 assignment as would "+=", ".=", "=+", or "=.". Consider the following
 example::
 
    OVERRIDES = "foo"
    A = "Z"
-   A_foo_append = "X"
+   A:foo:append = "X"
 
 For this case,
 ``A`` is unconditionally set to "Z" and "X" is unconditionally and
-immediately appended to the variable ``A_foo``. Because overrides have
-not been applied yet, ``A_foo`` is set to "X" due to the append and
+immediately appended to the variable ``A:foo``. Because overrides have
+not been applied yet, ``A:foo`` is set to "X" due to the append and
 ``A`` simply equals "Z".
 
 Applying overrides, however, changes things. Since "foo" is listed in
-``OVERRIDES``, the conditional variable ``A`` is replaced with the "foo"
-version, which is equal to "X". So effectively, ``A_foo`` replaces
+:term:`OVERRIDES`, the conditional variable ``A`` is replaced with the "foo"
+version, which is equal to "X". So effectively, ``A:foo`` replaces
 ``A``.
 
 This next example changes the order of the override and the append::
 
    OVERRIDES = "foo"
    A = "Z"
-   A_append_foo = "X"
+   A:append:foo = "X"
 
 For this case, before
-overrides are handled, ``A`` is set to "Z" and ``A_append_foo`` is set
+overrides are handled, ``A`` is set to "Z" and ``A:append:foo`` is set
 to "X". Once the override for "foo" is applied, however, ``A`` gets
 appended with "X". Consequently, ``A`` becomes "ZX". Notice that spaces
 are not appended.
@@ -648,21 +649,21 @@
 
    OVERRIDES = "foo"
    A = "Y"
-   A_foo_append = "Z"
-   A_foo_append = "X"
+   A:foo:append = "Z"
+   A:foo:append = "X"
 
 For this case, before any overrides are resolved,
 ``A`` is set to "Y" using an immediate assignment. After this immediate
-assignment, ``A_foo`` is set to "Z", and then further appended with "X"
+assignment, ``A:foo`` is set to "Z", and then further appended with "X"
 leaving the variable set to "ZX". Finally, applying the override for
 "foo" results in the conditional variable ``A`` becoming "ZX" (i.e.
-``A`` is replaced with ``A_foo``).
+``A`` is replaced with ``A:foo``).
 
 This final example mixes in some varying operators::
 
    A = "1"
-   A_append = "2"
-   A_append = "3"
+   A:append = "2"
+   A:append = "3"
    A += "4"
    A .= "5"
 
@@ -670,7 +671,7 @@
 operators are affecting the order of assignments as BitBake passes
 through the code multiple times. Initially, ``A`` is set to "1 45"
 because of the three statements that use immediate operators. After
-these assignments are made, BitBake applies the "_append" operations.
+these assignments are made, BitBake applies the ":append" operations.
 Those operations result in ``A`` becoming "1 4523".
 
 Sharing Functionality
@@ -686,7 +687,7 @@
 
 This section presents the mechanisms BitBake provides to allow you to
 share functionality between recipes. Specifically, the mechanisms
-include ``include``, ``inherit``, ``INHERIT``, and ``require``
+include ``include``, ``inherit``, :term:`INHERIT`, and ``require``
 directives.
 
 Locating Include and Class Files
@@ -702,7 +703,7 @@
 
 In order for include and class files to be found by BitBake, they need
 to be located in a "classes" subdirectory that can be found in
-``BBPATH``.
+:term:`BBPATH`.
 
 ``inherit`` Directive
 ---------------------
@@ -725,7 +726,7 @@
    inherit autotools
 
 In this case, BitBake would search for the directory
-``classes/autotools.bbclass`` in ``BBPATH``.
+``classes/autotools.bbclass`` in :term:`BBPATH`.
 
 .. note::
 
@@ -752,7 +753,7 @@
 overrides::
 
    VARIABLE = ""
-   VARIABLE_someoverride = "myclass"
+   VARIABLE:someoverride = "myclass"
 
 Another method is by using anonymous Python. Here is an example::
 
@@ -780,7 +781,7 @@
 BitBake to parse whatever file you specify, and to insert that file at
 that location. The directive is much like its equivalent in Make except
 that if the path specified on the include line is a relative path,
-BitBake locates the first file it can find within ``BBPATH``.
+BitBake locates the first file it can find within :term:`BBPATH`.
 
 The include directive is a more generic method of including
 functionality as compared to the :ref:`inherit <bitbake-user-manual/bitbake-user-manual-metadata:\`\`inherit\`\` directive>`
@@ -822,7 +823,7 @@
 
 Similar to how BitBake handles :ref:`include <bitbake-user-manual/bitbake-user-manual-metadata:\`\`include\`\` directive>`, if
 the path specified on the require line is a relative path, BitBake
-locates the first file it can find within ``BBPATH``.
+locates the first file it can find within :term:`BBPATH`.
 
 As an example, suppose you have two versions of a recipe (e.g.
 ``foo_1.2.2.bb`` and ``foo_2.0.0.bb``) where each version contains some
@@ -851,7 +852,7 @@
 This configuration directive causes the named class to be inherited at
 the point of the directive during parsing. As with the ``inherit``
 directive, the ``.bbclass`` file must be located in a "classes"
-subdirectory in one of the directories specified in ``BBPATH``.
+subdirectory in one of the directories specified in :term:`BBPATH`.
 
 .. note::
 
@@ -907,7 +908,7 @@
 shell but might be something such as ``dash``. You should not use
 Bash-specific script (bashisms).
 
-Overrides and override-style operators like ``_append`` and ``_prepend``
+Overrides and override-style operators like ``:append`` and ``:prepend``
 can also be applied to shell functions. Most commonly, this application
 would be used in a ``.bbappend`` file to modify functions in the main
 recipe. It can also be used to modify functions inherited from classes.
@@ -919,7 +920,7 @@
        fn
    }
 
-   fn_prepend() {
+   fn:prepend() {
        bbplain second
    }
 
@@ -927,7 +928,7 @@
        bbplain third
    }
 
-   do_foo_append() {
+   do_foo:append() {
        bbplain fourth
    }
 
@@ -977,7 +978,7 @@
 
 As an example, consider the following::
 
-   python do_foo_prepend() {
+   python do_foo:prepend() {
        bb.plain("first")
    }
 
@@ -985,7 +986,7 @@
        bb.plain("second")
    }
 
-   python do_foo_append() {
+   python do_foo:append() {
        bb.plain("third")
    }
 
@@ -1015,7 +1016,7 @@
    SOMECONDITION = "1"
    DEPENDS = "${@get_depends(d)}"
 
-This would result in ``DEPENDS`` containing ``dependencywithcond``.
+This would result in :term:`DEPENDS` containing ``dependencywithcond``.
 
 Here are some things to know about Python functions:
 
@@ -1134,12 +1135,12 @@
 values set for the variables within the anonymous functions become
 available to tasks, which always run after parsing.
 
-Overrides and override-style operators such as "``_append``" are applied
+Overrides and override-style operators such as "``:append``" are applied
 before anonymous functions run. In the following example, ``FOO`` ends
 up with the value "foo from anonymous"::
 
    FOO = "foo"
-   FOO_append = " from outside"
+   FOO:append = " from outside"
 
    python () {
        d.setVar("FOO", "foo from anonymous")
@@ -1164,7 +1165,7 @@
 where a class defines a task function and your recipe inherits the
 class. In this basic scenario, your recipe inherits the task function as
 defined in the class. If desired, your recipe can add to the start and
-end of the function by using the "_prepend" or "_append" operations
+end of the function by using the ":prepend" or ":append" operations
 respectively, or it can redefine the function completely. However, if it
 redefines the function, there is no means for it to call the class
 version of the function. ``EXPORT_FUNCTIONS`` provides a mechanism that
@@ -1382,7 +1383,7 @@
 original execution environment. BitBake saves a copy of the original
 environment into a special variable named :term:`BB_ORIGENV`.
 
-The ``BB_ORIGENV`` variable returns a datastore object that can be
+The :term:`BB_ORIGENV` variable returns a datastore object that can be
 queried using the standard datastore operators such as
 ``getVar(, False)``. The datastore object is useful, for example, to
 find the original ``DISPLAY`` variable. Here is an example::
@@ -1467,7 +1468,7 @@
          can result in unpredictable behavior.
 
       -  Setting the varflag to a value greater than the value used in
-         the ``BB_NUMBER_THREADS`` variable causes ``number_threads`` to
+         the :term:`BB_NUMBER_THREADS` variable causes ``number_threads`` to
          have no effect.
 
 -  ``[postfuncs]``: List of functions to call after the completion of
@@ -1537,7 +1538,7 @@
 failures.
 
 Following is an example event handler that prints the name of the event
-and the content of the ``FILE`` variable::
+and the content of the :term:`FILE` variable::
 
    addhandler myclass_eventhandler
    python myclass_eventhandler() {
@@ -1576,7 +1577,7 @@
 
 -  ``bb.event.ConfigParsed()``: Fired when the base configuration; which
    consists of ``bitbake.conf``, ``base.bbclass`` and any global
-   ``INHERIT`` statements; has been parsed. You can see multiple such
+   :term:`INHERIT` statements; has been parsed. You can see multiple such
    events when each of the workers parse the base configuration or if
    the server changes configuration and reparses. Any given datastore
    only has one such event executed against it, however. If
@@ -1733,13 +1734,13 @@
 
 BitBake uses the :term:`DEPENDS` variable to manage
 build time dependencies. The ``[deptask]`` varflag for tasks signifies
-the task of each item listed in ``DEPENDS`` that must complete before
+the task of each item listed in :term:`DEPENDS` that must complete before
 that task can be executed. Here is an example::
 
    do_configure[deptask] = "do_populate_sysroot"
 
 In this example, the ``do_populate_sysroot`` task
-of each item in ``DEPENDS`` must complete before ``do_configure`` can
+of each item in :term:`DEPENDS` must complete before ``do_configure`` can
 execute.
 
 Runtime Dependencies
@@ -1748,8 +1749,8 @@
 BitBake uses the :term:`PACKAGES`, :term:`RDEPENDS`, and :term:`RRECOMMENDS`
 variables to manage runtime dependencies.
 
-The ``PACKAGES`` variable lists runtime packages. Each of those packages
-can have ``RDEPENDS`` and ``RRECOMMENDS`` runtime dependencies. The
+The :term:`PACKAGES` variable lists runtime packages. Each of those packages
+can have :term:`RDEPENDS` and :term:`RRECOMMENDS` runtime dependencies. The
 ``[rdeptask]`` flag for tasks is used to signify the task of each item
 runtime dependency which must have completed before that task can be
 executed. ::
@@ -1757,9 +1758,9 @@
    do_package_qa[rdeptask] = "do_packagedata"
 
 In the previous
-example, the ``do_packagedata`` task of each item in ``RDEPENDS`` must
+example, the ``do_packagedata`` task of each item in :term:`RDEPENDS` must
 have completed before ``do_package_qa`` can execute.
-Although ``RDEPENDS`` contains entries from the
+Although :term:`RDEPENDS` contains entries from the
 runtime dependency namespace, BitBake knows how to map them back
 to the build-time dependency namespace, in which the tasks are defined.
 
@@ -1802,7 +1803,7 @@
 BitBake uses the ``[depends]`` flag in a more generic form to manage
 inter-task dependencies. This more generic form allows for
 inter-dependency checks for specific tasks rather than checks for the
-data in ``DEPENDS``. Here is an example::
+data in :term:`DEPENDS`. Here is an example::
 
    do_patch[depends] = "quilt-native:do_populate_sysroot"
 
diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst
index 2dca52c..6283c26 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.rst
@@ -24,13 +24,14 @@
       described here in this glossary.
 
 .. glossary::
+   :sorted:
 
    :term:`ASSUME_PROVIDED`
       Lists recipe names (:term:`PN` values) BitBake does not
       attempt to build. Instead, BitBake assumes these recipes have already
       been built.
 
-      In OpenEmbedded-Core, ``ASSUME_PROVIDED`` mostly specifies native
+      In OpenEmbedded-Core, :term:`ASSUME_PROVIDED` mostly specifies native
       tools that should not be built. An example is ``git-native``, which
       when specified allows for the Git binary from the host to be used
       rather than building ``git-native``.
@@ -83,14 +84,14 @@
 
       -  Attempts to access networks not in the host list cause a failure.
 
-      Using ``BB_ALLOWED_NETWORKS`` in conjunction with
+      Using :term:`BB_ALLOWED_NETWORKS` in conjunction with
       :term:`PREMIRRORS` is very useful. Adding the
-      host you want to use to ``PREMIRRORS`` results in the source code
+      host you want to use to :term:`PREMIRRORS` results in the source code
       being fetched from an allowed location and avoids raising an error
       when a host that is not allowed is in a
       :term:`SRC_URI` statement. This is because the
-      fetcher does not attempt to use the host listed in ``SRC_URI`` after
-      a successful fetch from the ``PREMIRRORS`` occurs.
+      fetcher does not attempt to use the host listed in :term:`SRC_URI` after
+      a successful fetch from the :term:`PREMIRRORS` occurs.
 
    :term:`BB_CONSOLELOG`
       Specifies the path to a log file into which BitBake's user interface
@@ -177,7 +178,7 @@
       issues a warning when the disk space in the ``${SSTATE_DIR}``
       directory drops below 1 Gbyte or the number of free inodes drops
       below 100 Kbytes. Subsequent warnings are issued during intervals as
-      defined by the ``BB_DISKMON_WARNINTERVAL`` variable.
+      defined by the :term:`BB_DISKMON_WARNINTERVAL` variable.
 
       The second example stops the build after all currently executing
       tasks complete when the minimum disk space in the ``${TMPDIR}``
@@ -191,14 +192,14 @@
    :term:`BB_DISKMON_WARNINTERVAL`
       Defines the disk space and free inode warning intervals.
 
-      If you are going to use the ``BB_DISKMON_WARNINTERVAL`` variable, you
+      If you are going to use the :term:`BB_DISKMON_WARNINTERVAL` variable, you
       must also use the :term:`BB_DISKMON_DIRS`
       variable and define its action as "WARN". During the build,
       subsequent warnings are issued each time disk space or number of free
       inodes further reduces by the respective interval.
 
-      If you do not provide a ``BB_DISKMON_WARNINTERVAL`` variable and you
-      do use ``BB_DISKMON_DIRS`` with the "WARN" action, the disk
+      If you do not provide a :term:`BB_DISKMON_WARNINTERVAL` variable and you
+      do use :term:`BB_DISKMON_DIRS` with the "WARN" action, the disk
       monitoring interval defaults to the following:
       BB_DISKMON_WARNINTERVAL = "50M,5K"
 
@@ -231,23 +232,23 @@
       based on the interval occur each time a respective interval is
       reached beyond the initial warning (i.e. 1 Gbytes and 100 Kbytes).
 
-   :term:`BB_ENV_WHITELIST`
-      Specifies the internal whitelist of variables to allow through from
-      the external environment into BitBake's datastore. If the value of
-      this variable is not specified (which is the default), the following
-      list is used: :term:`BBPATH`, :term:`BB_PRESERVE_ENV`,
-      :term:`BB_ENV_WHITELIST`, and :term:`BB_ENV_EXTRAWHITE`.
+   :term:`BB_ENV_EXTRAWHITE`
+      Specifies an additional set of variables to allow through (whitelist)
+      from the external environment into BitBake's datastore. This list of
+      variables are on top of the internal list set in
+      :term:`BB_ENV_WHITELIST`.
 
       .. note::
 
          You must set this variable in the external environment in order
          for it to work.
 
-   :term:`BB_ENV_EXTRAWHITE`
-      Specifies an additional set of variables to allow through (whitelist)
-      from the external environment into BitBake's datastore. This list of
-      variables are on top of the internal list set in
-      :term:`BB_ENV_WHITELIST`.
+   :term:`BB_ENV_WHITELIST`
+      Specifies the internal whitelist of variables to allow through from
+      the external environment into BitBake's datastore. If the value of
+      this variable is not specified (which is the default), the following
+      list is used: :term:`BBPATH`, :term:`BB_PRESERVE_ENV`,
+      :term:`BB_ENV_WHITELIST`, and :term:`BB_ENV_EXTRAWHITE`.
 
       .. note::
 
@@ -263,7 +264,7 @@
    :term:`BB_FILENAME`
       Contains the filename of the recipe that owns the currently running
       task. For example, if the ``do_fetch`` task that resides in the
-      ``my-recipe.bb`` is executing, the ``BB_FILENAME`` variable contains
+      ``my-recipe.bb`` is executing, the :term:`BB_FILENAME` variable contains
       "/foo/path/my-recipe.bb".
 
    :term:`BB_GENERATE_MIRROR_TARBALLS`
@@ -276,18 +277,6 @@
 
          BB_GENERATE_MIRROR_TARBALLS = "1"
 
-   :term:`BB_HASHCONFIG_WHITELIST`
-      Lists variables that are excluded from base configuration checksum,
-      which is used to determine if the cache can be reused.
-
-      One of the ways BitBake determines whether to re-parse the main
-      metadata is through checksums of the variables in the datastore of
-      the base configuration data. There are variables that you typically
-      want to exclude when checking whether or not to re-parse and thus
-      rebuild the cache. As an example, you would usually exclude ``TIME``
-      and ``DATE`` because these variables are always changing. If you did
-      not exclude them, BitBake would never reuse the cache.
-
    :term:`BB_HASHBASE_WHITELIST`
       Lists variables that are excluded from checksum and dependency data.
       Variables that are excluded can therefore change without affecting
@@ -309,6 +298,18 @@
       However, the more accurate the data returned, the more efficient the
       build will be.
 
+   :term:`BB_HASHCONFIG_WHITELIST`
+      Lists variables that are excluded from base configuration checksum,
+      which is used to determine if the cache can be reused.
+
+      One of the ways BitBake determines whether to re-parse the main
+      metadata is through checksums of the variables in the datastore of
+      the base configuration data. There are variables that you typically
+      want to exclude when checking whether or not to re-parse and thus
+      rebuild the cache. As an example, you would usually exclude ``TIME``
+      and ``DATE`` because these variables are always changing. If you did
+      not exclude them, BitBake would never reuse the cache.
+
    :term:`BB_HASHSERVE`
       Specifies the Hash Equivalence server to use.
 
@@ -333,7 +334,7 @@
 
    :term:`BB_LOGFMT`
       Specifies the name of the log files saved into
-      ``${``\ :term:`T`\ ``}``. By default, the ``BB_LOGFMT``
+      ``${``\ :term:`T`\ ``}``. By default, the :term:`BB_LOGFMT`
       variable is undefined and the log file names get created using the
       following form::
 
@@ -357,15 +358,15 @@
       running builds when not connected to the Internet, and when operating
       in certain kinds of firewall environments.
 
+   :term:`BB_NUMBER_PARSE_THREADS`
+      Sets the number of threads BitBake uses when parsing. By default, the
+      number of threads is equal to the number of cores on the system.
+
    :term:`BB_NUMBER_THREADS`
       The maximum number of tasks BitBake should run in parallel at any one
       time. If your host development system supports multiple cores, a good
       rule of thumb is to set this variable to twice the number of cores.
 
-   :term:`BB_NUMBER_PARSE_THREADS`
-      Sets the number of threads BitBake uses when parsing. By default, the
-      number of threads is equal to the number of cores on the system.
-
    :term:`BB_ORIGENV`
       Contains a copy of the original external environment in which BitBake
       was run. The copy is taken before any whitelisted variable values are
@@ -388,7 +389,7 @@
    :term:`BB_RUNFMT`
       Specifies the name of the executable script files (i.e. run files)
       saved into ``${``\ :term:`T`\ ``}``. By default, the
-      ``BB_RUNFMT`` variable is undefined and the run file names get
+      :term:`BB_RUNFMT` variable is undefined and the run file names get
       created using the following form::
 
          run.{task}.{pid}
@@ -454,7 +455,7 @@
    :term:`BB_SRCREV_POLICY`
       Defines the behavior of the fetcher when it interacts with source
       control systems and dynamic source revisions. The
-      ``BB_SRCREV_POLICY`` variable is useful when working without a
+      :term:`BB_SRCREV_POLICY` variable is useful when working without a
       network.
 
       The variable can be set using one of two policies:
@@ -498,7 +499,7 @@
       Allows adjustment of a task's Input/Output priority. During
       Autobuilder testing, random failures can occur for tasks due to I/O
       starvation. These failures occur during various QEMU runtime
-      timeouts. You can use the ``BB_TASK_IONICE_LEVEL`` variable to adjust
+      timeouts. You can use the :term:`BB_TASK_IONICE_LEVEL` variable to adjust
       the I/O priority of these tasks.
 
       .. note::
@@ -572,13 +573,13 @@
 
       .. note::
 
-         Internally, the ``BBCLASSEXTEND`` mechanism generates recipe
+         Internally, the :term:`BBCLASSEXTEND` mechanism generates recipe
          variants by rewriting variable values and applying overrides such
          as ``_class-native``. For example, to generate a native version of
          a recipe, a :term:`DEPENDS` on "foo" is
-         rewritten to a ``DEPENDS`` on "foo-native".
+         rewritten to a :term:`DEPENDS` on "foo-native".
 
-         Even when using ``BBCLASSEXTEND``, the recipe is only parsed once.
+         Even when using :term:`BBCLASSEXTEND`, the recipe is only parsed once.
          Parsing once adds some limitations. For example, it is not
          possible to include a different file depending on the variant,
          since ``include`` statements are processed when the recipe is
@@ -614,14 +615,14 @@
       - effectively letting you control the precedence for the multiple
       layers. The precedence established through this variable stands
       regardless of a recipe's version (:term:`PV` variable).
-      For example, a layer that has a recipe with a higher ``PV`` value but
-      for which the ``BBFILE_PRIORITY`` is set to have a lower precedence
+      For example, a layer that has a recipe with a higher :term:`PV` value but
+      for which the :term:`BBFILE_PRIORITY` is set to have a lower precedence
       still has a lower precedence.
 
-      A larger value for the ``BBFILE_PRIORITY`` variable results in a
+      A larger value for the :term:`BBFILE_PRIORITY` variable results in a
       higher precedence. For example, the value 6 has a higher precedence
-      than the value 5. If not specified, the ``BBFILE_PRIORITY`` variable
-      is set based on layer dependencies (see the ``LAYERDEPENDS`` variable
+      than the value 5. If not specified, the :term:`BBFILE_PRIORITY` variable
+      is set based on layer dependencies (see the :term:`LAYERDEPENDS` variable
       for more information. The default priority, if unspecified for a
       layer with no dependencies, is the lowest defined priority + 1 (or 1
       if no priorities are defined).
@@ -644,7 +645,7 @@
       Activates content depending on presence of identified layers.  You
       identify the layers by the collections that the layers define.
 
-      Use the ``BBFILES_DYNAMIC`` variable to avoid ``.bbappend`` files whose
+      Use the :term:`BBFILES_DYNAMIC` variable to avoid ``.bbappend`` files whose
       corresponding ``.bb`` file is in a layer that attempts to modify other
       layers through ``.bbappend`` but does not want to introduce a hard
       dependency on those other layers.
@@ -653,7 +654,7 @@
       ``.bb`` files in case a layer is not present.  Use this avoid hard
       dependency on those other layers.
 
-      Use the following form for ``BBFILES_DYNAMIC``::
+      Use the following form for :term:`BBFILES_DYNAMIC`::
 
          collection_name:filename_pattern
 
@@ -690,7 +691,7 @@
    :term:`BBINCLUDELOGS_LINES`
       If :term:`BBINCLUDELOGS` is set, specifies
       the maximum number of lines from the task log file to print when
-      reporting a failed task. If you do not set ``BBINCLUDELOGS_LINES``,
+      reporting a failed task. If you do not set :term:`BBINCLUDELOGS_LINES`,
       the entire log is printed.
 
    :term:`BBLAYERS`
@@ -716,7 +717,7 @@
    :term:`BBMASK`
       Prevents BitBake from processing recipes and recipe append files.
 
-      You can use the ``BBMASK`` variable to "hide" these ``.bb`` and
+      You can use the :term:`BBMASK` variable to "hide" these ``.bb`` and
       ``.bbappend`` files. BitBake ignores any recipe or recipe append
       files that match any of the expressions. It is as if BitBake does not
       see them at all. Consequently, matching files are not parsed or
@@ -753,7 +754,7 @@
       Enables BitBake to perform multiple configuration builds and lists
       each separate configuration (multiconfig). You can use this variable
       to cause BitBake to build multiple targets where each target has a
-      separate configuration. Define ``BBMULTICONFIG`` in your
+      separate configuration. Define :term:`BBMULTICONFIG` in your
       ``conf/local.conf`` configuration file.
 
       As an example, the following line specifies three multiconfigs, each
@@ -765,7 +766,7 @@
       build directory within a directory named ``conf/multiconfig`` (e.g.
       build_directory\ ``/conf/multiconfig/configA.conf``).
 
-      For information on how to use ``BBMULTICONFIG`` in an environment
+      For information on how to use :term:`BBMULTICONFIG` in an environment
       that supports building targets with multiple configurations, see the
       ":ref:`bitbake-user-manual/bitbake-user-manual-intro:executing a multiple configuration build`"
       section.
@@ -776,7 +777,7 @@
       variable.
 
       If you run BitBake from a directory outside of the build directory,
-      you must be sure to set ``BBPATH`` to point to the build directory.
+      you must be sure to set :term:`BBPATH` to point to the build directory.
       Set the variable as you would any environment variable and then run
       BitBake::
 
@@ -823,7 +824,7 @@
       The most common usage of this is variable is to set it to "-1" within
       a recipe for a development version of a piece of software. Using the
       variable in this way causes the stable version of the recipe to build
-      by default in the absence of ``PREFERRED_VERSION`` being used to
+      by default in the absence of :term:`PREFERRED_VERSION` being used to
       build the development version.
 
       .. note::
@@ -836,7 +837,7 @@
       Lists a recipe's build-time dependencies (i.e. other recipe files).
 
       Consider this simple example for two recipes named "a" and "b" that
-      produce similarly named packages. In this example, the ``DEPENDS``
+      produce similarly named packages. In this example, the :term:`DEPENDS`
       statement appears in the "a" recipe::
 
          DEPENDS = "b"
@@ -854,7 +855,7 @@
 
    :term:`DL_DIR`
       The central download directory used by the build process to store
-      downloads. By default, ``DL_DIR`` gets files suitable for mirroring for
+      downloads. By default, :term:`DL_DIR` gets files suitable for mirroring for
       everything except Git repositories. If you want tarballs of Git
       repositories, use the :term:`BB_GENERATE_MIRROR_TARBALLS` variable.
 
@@ -869,14 +870,14 @@
 
       .. note::
 
-         Recipes added to ``EXCLUDE_FROM_WORLD`` may still be built during a world
+         Recipes added to :term:`EXCLUDE_FROM_WORLD` may still be built during a world
          build in order to satisfy dependencies of other recipes. Adding a
-         recipe to ``EXCLUDE_FROM_WORLD`` only ensures that the recipe is not
+         recipe to :term:`EXCLUDE_FROM_WORLD` only ensures that the recipe is not
          explicitly added to the list of build targets in a world build.
 
    :term:`FAKEROOT`
       Contains the command to use when running a shell script in a fakeroot
-      environment. The ``FAKEROOT`` variable is obsolete and has been
+      environment. The :term:`FAKEROOT` variable is obsolete and has been
       replaced by the other ``FAKEROOT*`` variables. See these entries in
       the glossary for more information.
 
@@ -939,9 +940,9 @@
       Causes the named class or classes to be inherited globally. Anonymous
       functions in the class or classes are not executed for the base
       configuration and in each individual recipe. The OpenEmbedded build
-      system ignores changes to ``INHERIT`` in individual recipes.
+      system ignores changes to :term:`INHERIT` in individual recipes.
 
-      For more information on ``INHERIT``, see the
+      For more information on :term:`INHERIT`, see the
       ":ref:`bitbake-user-manual/bitbake-user-manual-metadata:\`\`inherit\`\` configuration directive`"
       section.
 
@@ -989,7 +990,7 @@
       the build system searches for source code, it first tries the local
       download directory. If that location fails, the build system tries
       locations defined by :term:`PREMIRRORS`, the
-      upstream source, and then locations specified by ``MIRRORS`` in that
+      upstream source, and then locations specified by :term:`MIRRORS` in that
       order.
 
    :term:`MULTI_PROVIDER_WHITELIST`
@@ -1006,12 +1007,12 @@
       ``virtual/kernel``, and so forth).
 
    :term:`OVERRIDES`
-      BitBake uses ``OVERRIDES`` to control what variables are overridden
+      BitBake uses :term:`OVERRIDES` to control what variables are overridden
       after BitBake parses recipes and configuration files.
 
       Following is a simple example that uses an overrides list based on
       machine architectures: OVERRIDES = "arm:x86:mips:powerpc" You can
-      find information on how to use ``OVERRIDES`` in the
+      find information on how to use :term:`OVERRIDES` in the
       ":ref:`bitbake-user-manual/bitbake-user-manual-metadata:conditional syntax
       (overrides)`" section.
 
@@ -1025,11 +1026,11 @@
    :term:`PACKAGES_DYNAMIC`
       A promise that your recipe satisfies runtime dependencies for
       optional modules that are found in other recipes.
-      ``PACKAGES_DYNAMIC`` does not actually satisfy the dependencies, it
+      :term:`PACKAGES_DYNAMIC` does not actually satisfy the dependencies, it
       only states that they should be satisfied. For example, if a hard,
       runtime dependency (:term:`RDEPENDS`) of another
       package is satisfied during the build through the
-      ``PACKAGES_DYNAMIC`` variable, but a package with the module name is
+      :term:`PACKAGES_DYNAMIC` variable, but a package with the module name is
       never actually produced, then the other package will be broken.
 
    :term:`PE`
@@ -1068,8 +1069,8 @@
    :term:`PREFERRED_PROVIDERS`
       Determines which recipe should be given preference for cases where
       multiple recipes provide the same item. Functionally,
-      ``PREFERRED_PROVIDERS`` is identical to
-      :term:`PREFERRED_PROVIDER`. However, the ``PREFERRED_PROVIDERS`` variable
+      :term:`PREFERRED_PROVIDERS` is identical to
+      :term:`PREFERRED_PROVIDER`. However, the :term:`PREFERRED_PROVIDERS` variable
       lets you define preferences for multiple situations using the following
       form::
 
@@ -1087,7 +1088,7 @@
       select, and you should set :term:`PV` accordingly for
       precedence.
 
-      The ``PREFERRED_VERSION`` variable supports limited wildcard use
+      The :term:`PREFERRED_VERSION` variable supports limited wildcard use
       through the "``%``" character. You can use the character to match any
       number of characters, which can be useful when specifying versions
       that contain long revision numbers that potentially change. Here are
@@ -1110,14 +1111,14 @@
       Specifies additional paths from which BitBake gets source code. When
       the build system searches for source code, it first tries the local
       download directory. If that location fails, the build system tries
-      locations defined by ``PREMIRRORS``, the upstream source, and then
+      locations defined by :term:`PREMIRRORS`, the upstream source, and then
       locations specified by :term:`MIRRORS` in that order.
 
       Typically, you would add a specific server for the build system to
       attempt before any others by adding something like the following to
       your configuration::
 
-         PREMIRRORS_prepend = "\
+         PREMIRRORS:prepend = "\
          git://.*/.* http://www.yoctoproject.org/sources/ \n \
          ftp://.*/.* http://www.yoctoproject.org/sources/ \n \
          http://.*/.* http://www.yoctoproject.org/sources/ \n \
@@ -1130,25 +1131,25 @@
 
    :term:`PROVIDES`
       A list of aliases by which a particular recipe can be known. By
-      default, a recipe's own ``PN`` is implicitly already in its
-      ``PROVIDES`` list. If a recipe uses ``PROVIDES``, the additional
+      default, a recipe's own :term:`PN` is implicitly already in its
+      :term:`PROVIDES` list. If a recipe uses :term:`PROVIDES`, the additional
       aliases are synonyms for the recipe and can be useful satisfying
       dependencies of other recipes during the build as specified by
-      ``DEPENDS``.
+      :term:`DEPENDS`.
 
-      Consider the following example ``PROVIDES`` statement from a recipe
+      Consider the following example :term:`PROVIDES` statement from a recipe
       file ``libav_0.8.11.bb``::
 
          PROVIDES += "libpostproc"
 
-      The ``PROVIDES`` statement results in the "libav" recipe also being known
+      The :term:`PROVIDES` statement results in the "libav" recipe also being known
       as "libpostproc".
 
       In addition to providing recipes under alternate names, the
-      ``PROVIDES`` mechanism is also used to implement virtual targets. A
+      :term:`PROVIDES` mechanism is also used to implement virtual targets. A
       virtual target is a name that corresponds to some particular
       functionality (e.g. a Linux kernel). Recipes that provide the
-      functionality in question list the virtual target in ``PROVIDES``.
+      functionality in question list the virtual target in :term:`PROVIDES`.
       Recipes that depend on the functionality in question can include the
       virtual target in :term:`DEPENDS` to leave the
       choice of provider open.
@@ -1160,12 +1161,12 @@
    :term:`PRSERV_HOST`
       The network based :term:`PR` service host and port.
 
-      Following is an example of how the ``PRSERV_HOST`` variable is set::
+      Following is an example of how the :term:`PRSERV_HOST` variable is set::
 
          PRSERV_HOST = "localhost:0"
 
       You must set the variable if you want to automatically start a local PR
-      service. You can set ``PRSERV_HOST`` to other values to use a remote PR
+      service. You can set :term:`PRSERV_HOST` to other values to use a remote PR
       service.
 
    :term:`PV`
@@ -1177,24 +1178,24 @@
       a package in this list cannot be found during the build, you will get
       a build error.
 
-      Because the ``RDEPENDS`` variable applies to packages being built,
+      Because the :term:`RDEPENDS` variable applies to packages being built,
       you should always use the variable in a form with an attached package
       name. For example, suppose you are building a development package
       that depends on the ``perl`` package. In this case, you would use the
-      following ``RDEPENDS`` statement::
+      following :term:`RDEPENDS` statement::
 
-         RDEPENDS_${PN}-dev += "perl"
+         RDEPENDS:${PN}-dev += "perl"
 
       In the example, the development package depends on the ``perl`` package.
-      Thus, the ``RDEPENDS`` variable has the ``${PN}-dev`` package name as part
+      Thus, the :term:`RDEPENDS` variable has the ``${PN}-dev`` package name as part
       of the variable.
 
       BitBake supports specifying versioned dependencies. Although the
       syntax varies depending on the packaging format, BitBake hides these
       differences from you. Here is the general syntax to specify versions
-      with the ``RDEPENDS`` variable::
+      with the :term:`RDEPENDS` variable::
 
-         RDEPENDS_${PN} = "package (operator version)"
+         RDEPENDS:${PN} = "package (operator version)"
 
       For ``operator``, you can specify the following::
 
@@ -1207,7 +1208,7 @@
       For example, the following sets up a dependency on version 1.2 or
       greater of the package ``foo``::
 
-         RDEPENDS_${PN} = "foo (>= 1.2)"
+         RDEPENDS:${PN} = "foo (>= 1.2)"
 
       For information on build-time dependencies, see the :term:`DEPENDS`
       variable.
@@ -1218,39 +1219,39 @@
 
    :term:`REQUIRED_VERSION`
       If there are multiple versions of a recipe available, this variable
-      determines which version should be given preference. ``REQUIRED_VERSION``
+      determines which version should be given preference. :term:`REQUIRED_VERSION`
       works in exactly the same manner as :term:`PREFERRED_VERSION`, except
       that if the specified version is not available then an error message
       is shown and the build fails immediately.
 
-      If both ``REQUIRED_VERSION`` and ``PREFERRED_VERSION`` are set for
-      the same recipe, the ``REQUIRED_VERSION`` value applies.
+      If both :term:`REQUIRED_VERSION` and :term:`PREFERRED_VERSION` are set for
+      the same recipe, the :term:`REQUIRED_VERSION` value applies.
 
    :term:`RPROVIDES`
       A list of package name aliases that a package also provides. These
       aliases are useful for satisfying runtime dependencies of other
       packages both during the build and on the target (as specified by
-      ``RDEPENDS``).
+      :term:`RDEPENDS`).
 
       As with all package-controlling variables, you must always use the
       variable in conjunction with a package name override. Here is an
       example::
 
-         RPROVIDES_${PN} = "widget-abi-2"
+         RPROVIDES:${PN} = "widget-abi-2"
 
    :term:`RRECOMMENDS`
       A list of packages that extends the usability of a package being
       built. The package being built does not depend on this list of
       packages in order to successfully build, but needs them for the
       extended usability. To specify runtime dependencies for packages, see
-      the ``RDEPENDS`` variable.
+      the :term:`RDEPENDS` variable.
 
       BitBake supports specifying versioned recommends. Although the syntax
       varies depending on the packaging format, BitBake hides these
       differences from you. Here is the general syntax to specify versions
-      with the ``RRECOMMENDS`` variable::
+      with the :term:`RRECOMMENDS` variable::
 
-         RRECOMMENDS_${PN} = "package (operator version)"
+         RRECOMMENDS:${PN} = "package (operator version)"
 
       For ``operator``, you can specify the following::
 
@@ -1263,7 +1264,7 @@
       For example, the following sets up a recommend on version
       1.2 or greater of the package ``foo``::
 
-         RRECOMMENDS_${PN} = "foo (>= 1.2)"
+         RRECOMMENDS:${PN} = "foo (>= 1.2)"
 
    :term:`SECTION`
       The section in which packages should be categorized.
@@ -1272,10 +1273,10 @@
       The list of source files - local or remote. This variable tells
       BitBake which bits to pull for the build and how to pull them. For
       example, if the recipe or append file needs to fetch a single tarball
-      from the Internet, the recipe or append file uses a ``SRC_URI`` entry
+      from the Internet, the recipe or append file uses a :term:`SRC_URI` entry
       that specifies that tarball. On the other hand, if the recipe or
       append file needs to fetch a tarball and include a custom file, the
-      recipe or append file needs an ``SRC_URI`` variable that specifies
+      recipe or append file needs an :term:`SRC_URI` variable that specifies
       all those sources.
 
       The following list explains the available URI protocols:
@@ -1328,8 +1329,8 @@
          subdirectory within the archive.
 
       -  ``name`` : Specifies a name to be used for association with
-         ``SRC_URI`` checksums when you have more than one file specified
-         in ``SRC_URI``.
+         :term:`SRC_URI` checksums when you have more than one file specified
+         in :term:`SRC_URI`.
 
       -  ``downloadfilename`` : Specifies the filename used when storing
          the downloaded file.
@@ -1344,7 +1345,7 @@
       variable applies only when using Subversion, Git, Mercurial and
       Bazaar. If you want to build a fixed revision and you want to avoid
       performing a query on the remote repository every time BitBake parses
-      your recipe, you should specify a ``SRCREV`` that is a full revision
+      your recipe, you should specify a :term:`SRCREV` that is a full revision
       identifier and not just a tag.
 
    :term:`SRCREV_FORMAT`
@@ -1353,10 +1354,10 @@
       :term:`SRC_URI`.
 
       The system needs help constructing these values under these
-      circumstances. Each component in the ``SRC_URI`` is assigned a name
-      and these are referenced in the ``SRCREV_FORMAT`` variable. Consider
+      circumstances. Each component in the :term:`SRC_URI` is assigned a name
+      and these are referenced in the :term:`SRCREV_FORMAT` variable. Consider
       an example with URLs named "machine" and "meta". In this case,
-      ``SRCREV_FORMAT`` could look like "machine_meta" and those names
+      :term:`SRCREV_FORMAT` could look like "machine_meta" and those names
       would have the SCM versions substituted into each position. Only one
       ``AUTOINC`` placeholder is added and if needed. And, this placeholder
       is placed at the start of the returned string.
@@ -1368,7 +1369,7 @@
 
    :term:`STAMPCLEAN`
       Specifies the base path used to create recipe stamp files. Unlike the
-      :term:`STAMP` variable, ``STAMPCLEAN`` can contain
+      :term:`STAMP` variable, :term:`STAMPCLEAN` can contain
       wildcards to match the range of files a clean operation should
       remove. BitBake uses a clean operation to remove any other stamps it
       should be removing when creating a new stamp.