diff --git a/poky/meta/recipes-bsp/acpid/acpid.inc b/poky/meta/recipes-bsp/acpid/acpid.inc
index 1e43e7a..f48e519 100644
--- a/poky/meta/recipes-bsp/acpid/acpid.inc
+++ b/poky/meta/recipes-bsp/acpid/acpid.inc
@@ -22,9 +22,9 @@
 INITSCRIPT_NAME = "acpid"
 INITSCRIPT_PARAMS = "defaults"
 
-SYSTEMD_SERVICE_${PN} = "acpid.service"
+SYSTEMD_SERVICE:${PN} = "acpid.service"
 
-do_install_append () {
+do_install:append () {
 	install -d ${D}${sysconfdir}/init.d
 	sed -e 's,/usr/sbin,${sbindir},g' ${WORKDIR}/init > ${D}${sysconfdir}/init.d/acpid
 	chmod 755 ${D}${sysconfdir}/init.d/acpid
diff --git a/poky/meta/recipes-bsp/alsa-state/alsa-state.bb b/poky/meta/recipes-bsp/alsa-state/alsa-state.bb
index cec2272..df54663 100644
--- a/poky/meta/recipes-bsp/alsa-state/alsa-state.bb
+++ b/poky/meta/recipes-bsp/alsa-state/alsa-state.bb
@@ -49,15 +49,15 @@
 
 PACKAGES += "alsa-states"
 
-RRECOMMENDS_alsa-state = "alsa-states"
+RRECOMMENDS:alsa-state = "alsa-states"
 
-RDEPENDS_${PN} = "alsa-utils-alsactl"
-FILES_${PN} = "${sysconfdir}/init.d ${sysconfdir}/asound.conf"
-CONFFILES_${PN} = "${sysconfdir}/asound.conf"
+RDEPENDS:${PN} = "alsa-utils-alsactl"
+FILES:${PN} = "${sysconfdir}/init.d ${sysconfdir}/asound.conf"
+CONFFILES:${PN} = "${sysconfdir}/asound.conf"
 
-FILES_alsa-states = "${localstatedir}/lib/alsa/*.state"
+FILES:alsa-states = "${localstatedir}/lib/alsa/*.state"
 
-pkg_postinst_${PN}() {
+pkg_postinst:${PN}() {
 	if test -z "$D"
 	then
 		if test -x ${sbindir}/alsactl
diff --git a/poky/meta/recipes-bsp/apmd/apmd_3.2.2-15.bb b/poky/meta/recipes-bsp/apmd/apmd_3.2.2-15.bb
index 82c2649..5368abf 100644
--- a/poky/meta/recipes-bsp/apmd/apmd_3.2.2-15.bb
+++ b/poky/meta/recipes-bsp/apmd/apmd_3.2.2-15.bb
@@ -36,7 +36,7 @@
 INITSCRIPT_NAME = "apmd"
 INITSCRIPT_PARAMS = "defaults"
 
-SYSTEMD_SERVICE_${PN} = "apmd.service"
+SYSTEMD_SERVICE:${PN} = "apmd.service"
 SYSTEMD_AUTO_ENABLE = "disable"
 
 EXTRA_OEMAKE = "-e MAKEFLAGS="
@@ -81,5 +81,5 @@
 
 PACKAGES =+ "libapm apm"
 
-FILES_libapm = "${libdir}/libapm${SOLIBS}"
-FILES_apm = "${bindir}/apm*"
+FILES:libapm = "${libdir}/libapm${SOLIBS}"
+FILES:apm = "${bindir}/apm*"
diff --git a/poky/meta/recipes-bsp/efivar/efivar_37.bb b/poky/meta/recipes-bsp/efivar/efivar_37.bb
index 5bf121f..b11f153 100644
--- a/poky/meta/recipes-bsp/efivar/efivar_37.bb
+++ b/poky/meta/recipes-bsp/efivar/efivar_37.bb
@@ -22,7 +22,7 @@
 # enforce BFD.
 LDFLAGS += "-fuse-ld=bfd"
 
-do_compile_prepend() {
+do_compile:prepend() {
     # Remove when https://github.com/rhboot/efivar/issues/130 is fixed
     oe_runmake \
         CFLAGS="${BUILD_CFLAGS}" \
@@ -36,6 +36,6 @@
 
 BBCLASSEXTEND = "native"
 
-RRECOMMENDS_${PN}_class-target = "kernel-module-efivarfs"
+RRECOMMENDS:${PN}:class-target = "kernel-module-efivarfs"
 
 CLEANBROKEN = "1"
diff --git a/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb b/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb
index fa98860..ef3061c 100644
--- a/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb
+++ b/poky/meta/recipes-bsp/gnu-efi/gnu-efi_3.0.13.bb
@@ -22,9 +22,9 @@
 SRC_URI[sha256sum] = "2fccf715279c46ee69c4859186af8150d07a13f4d19876e5459cd65be82d3b7d"
 
 COMPATIBLE_HOST = "(x86_64.*|i.86.*|aarch64.*|arm.*)-linux"
-COMPATIBLE_HOST_armv4 = 'null'
+COMPATIBLE_HOST:armv4 = 'null'
 
-do_configure_linux-gnux32_prepend() {
+do_configure:linux-gnux32:prepend() {
 	cp ${STAGING_INCDIR}/gnu/stubs-x32.h ${STAGING_INCDIR}/gnu/stubs-64.h
 	cp ${STAGING_INCDIR}/bits/long-double-32.h ${STAGING_INCDIR}/bits/long-double-64.h
 }
@@ -48,18 +48,18 @@
         oe_runmake install INSTALLROOT="${D}"
 }
 
-FILES_${PN} += "${libdir}/*.lds"
+FILES:${PN} += "${libdir}/*.lds"
 
 # 64-bit binaries are expected for EFI when targeting X32
-INSANE_SKIP_${PN}-dev_append_linux-gnux32 = " arch"
-INSANE_SKIP_${PN}-dev_append_linux-muslx32 = " arch"
+INSANE_SKIP:${PN}-dev:append:linux-gnux32 = " arch"
+INSANE_SKIP:${PN}-dev:append:linux-muslx32 = " arch"
 
 BBCLASSEXTEND = "native"
 
 # It doesn't support sse, its make.defaults sets:
 # CFLAGS += -mno-mmx -mno-sse
 # So also remove -mfpmath=sse from TUNE_CCARGS
-TUNE_CCARGS_remove = "-mfpmath=sse"
+TUNE_CCARGS:remove = "-mfpmath=sse"
 
 python () {
     ccargs = d.getVar('TUNE_CCARGS').split()
diff --git a/poky/meta/recipes-bsp/grub/grub-bootconf_1.00.bb b/poky/meta/recipes-bsp/grub/grub-bootconf_1.00.bb
index 5725803..151e601 100644
--- a/poky/meta/recipes-bsp/grub/grub-bootconf_1.00.bb
+++ b/poky/meta/recipes-bsp/grub/grub-bootconf_1.00.bb
@@ -5,7 +5,7 @@
 different machines."
 HOMEPAGE = "https://www.gnu.org/software/grub/manual/grub/grub.html#Configuration"
 
-RPROVIDES_${PN} += "virtual/grub-bootconf"
+RPROVIDES:${PN} += "virtual/grub-bootconf"
 
 inherit grub-efi-cfg
 
@@ -29,4 +29,4 @@
 	install grub-bootconf ${D}${EFI_FILES_PATH}/grub.cfg
 }
 
-FILES_${PN} = "${EFI_FILES_PATH}/grub.cfg"
+FILES:${PN} = "${EFI_FILES_PATH}/grub.cfg"
diff --git a/poky/meta/recipes-bsp/grub/grub-efi_2.06.bb b/poky/meta/recipes-bsp/grub/grub-efi_2.06.bb
index 287845c..96e9df8 100644
--- a/poky/meta/recipes-bsp/grub/grub-efi_2.06.bb
+++ b/poky/meta/recipes-bsp/grub/grub-efi_2.06.bb
@@ -4,8 +4,8 @@
 
 GRUBPLATFORM = "efi"
 
-DEPENDS_append = " grub-native"
-RDEPENDS_${PN} = "grub-common virtual/grub-bootconf"
+DEPENDS:append = " grub-native"
+RDEPENDS:${PN} = "grub-common virtual/grub-bootconf"
 
 SRC_URI += " \
            file://cfg \
@@ -79,13 +79,13 @@
 
 addtask deploy after do_install before do_build
 
-FILES_${PN} = "${libdir}/grub/${GRUB_TARGET}-efi \
+FILES:${PN} = "${libdir}/grub/${GRUB_TARGET}-efi \
                ${datadir}/grub \
                ${EFI_FILES_PATH}/${GRUB_IMAGE} \
                "
 
 # 64-bit binaries are expected for the bootloader with an x32 userland
-INSANE_SKIP_${PN}_append_linux-gnux32 = " arch"
-INSANE_SKIP_${PN}-dbg_append_linux-gnux32 = " arch"
-INSANE_SKIP_${PN}_append_linux-muslx32 = " arch"
-INSANE_SKIP_${PN}-dbg_append_linux-muslx32 = " arch"
+INSANE_SKIP:${PN}:append:linux-gnux32 = " arch"
+INSANE_SKIP:${PN}-dbg:append:linux-gnux32 = " arch"
+INSANE_SKIP:${PN}:append:linux-muslx32 = " arch"
+INSANE_SKIP:${PN}-dbg:append:linux-muslx32 = " arch"
diff --git a/poky/meta/recipes-bsp/grub/grub2.inc b/poky/meta/recipes-bsp/grub/grub2.inc
index 1929476..bb79134 100644
--- a/poky/meta/recipes-bsp/grub/grub2.inc
+++ b/poky/meta/recipes-bsp/grub/grub2.inc
@@ -30,21 +30,21 @@
 DEPENDS = "flex-native bison-native gettext-native"
 
 COMPATIBLE_HOST = '(x86_64.*|i.86.*|arm.*|aarch64.*|riscv.*)-(linux.*|freebsd.*)'
-COMPATIBLE_HOST_armv7a = 'null'
-COMPATIBLE_HOST_armv7ve = 'null'
+COMPATIBLE_HOST:armv7a = 'null'
+COMPATIBLE_HOST:armv7ve = 'null'
 
 # configure.ac has code to set this automagically from the target tuple
 # but the OE freeform one (core2-foo-bar-linux) don't work with that.
 
-GRUBPLATFORM_arm = "efi"
-GRUBPLATFORM_aarch64 = "efi"
-GRUBPLATFORM_riscv32 = "efi"
-GRUBPLATFORM_riscv64 = "efi"
+GRUBPLATFORM:arm = "efi"
+GRUBPLATFORM:aarch64 = "efi"
+GRUBPLATFORM:riscv32 = "efi"
+GRUBPLATFORM:riscv64 = "efi"
 GRUBPLATFORM ??= "pc"
 
 inherit autotools gettext texinfo pkgconfig
 
-CFLAGS_remove = "-O2"
+CFLAGS:remove = "-O2"
 
 EXTRA_OECONF = "--with-platform=${GRUBPLATFORM} \
                 --disable-grub-mkfont \
@@ -70,7 +70,7 @@
 
 export PYTHON = "python3"
 
-do_configure_prepend() {
+do_configure:prepend() {
 	cd ${S}
 	FROM_BOOTSTRAP=1 ${S}/autogen.sh
 	cd ${B}
diff --git a/poky/meta/recipes-bsp/grub/grub_2.06.bb b/poky/meta/recipes-bsp/grub/grub_2.06.bb
index d4e09fa..05d4627 100644
--- a/poky/meta/recipes-bsp/grub/grub_2.06.bb
+++ b/poky/meta/recipes-bsp/grub/grub_2.06.bb
@@ -1,24 +1,24 @@
 require grub2.inc
 
-RDEPENDS_${PN}-common += "${PN}-editenv"
-RDEPENDS_${PN} += "${PN}-common"
-RDEPENDS_${PN}_class-native = ""
+RDEPENDS:${PN}-common += "${PN}-editenv"
+RDEPENDS:${PN} += "${PN}-common"
+RDEPENDS:${PN}:class-native = ""
 
-RPROVIDES_${PN}-editenv += "${PN}-efi-editenv"
+RPROVIDES:${PN}-editenv += "${PN}-efi-editenv"
 
-PROVIDES_append_class-native = " grub-efi-native"
+PROVIDES:append:class-native = " grub-efi-native"
 
 PACKAGES =+ "${PN}-editenv ${PN}-common"
-FILES_${PN}-editenv = "${bindir}/grub-editenv"
-FILES_${PN}-common = " \
+FILES:${PN}-editenv = "${bindir}/grub-editenv"
+FILES:${PN}-common = " \
     ${bindir} \
     ${sysconfdir} \
     ${sbindir} \
     ${datadir}/grub \
 "
-ALLOW_EMPTY_${PN} = "1"
+ALLOW_EMPTY:${PN} = "1"
 
-do_install_append () {
+do_install:append () {
     # Avoid conflicts with the EFI package for systems such as arm64 where we
     # need to build grub and grub-efi but only EFI is supported by removing EFI
     # from this package.
@@ -35,7 +35,7 @@
         {} +
 }
 
-INSANE_SKIP_${PN} = "arch"
-INSANE_SKIP_${PN}-dbg = "arch"
+INSANE_SKIP:${PN} = "arch"
+INSANE_SKIP:${PN}-dbg = "arch"
 
 BBCLASSEXTEND = "native nativesdk"
diff --git a/poky/meta/recipes-bsp/keymaps/keymaps_1.0.bb b/poky/meta/recipes-bsp/keymaps/keymaps_1.0.bb
index 24b13f9..091bcc6 100644
--- a/poky/meta/recipes-bsp/keymaps/keymaps_1.0.bb
+++ b/poky/meta/recipes-bsp/keymaps/keymaps_1.0.bb
@@ -2,7 +2,7 @@
 DESCRIPTION = "Keymaps and initscript to set the keymap on bootup."
 SECTION = "base"
 
-RDEPENDS_${PN} = "kbd"
+RDEPENDS:${PN} = "kbd"
 
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
@@ -37,8 +37,8 @@
     fi
 }
 
-PACKAGE_WRITE_DEPS_append = " ${@bb.utils.contains('DISTRO_FEATURES','systemd sysvinit','systemd-systemctl-native','',d)}"
-pkg_postinst_${PN} () {
+PACKAGE_WRITE_DEPS:append = " ${@bb.utils.contains('DISTRO_FEATURES','systemd sysvinit','systemd-systemctl-native','',d)}"
+pkg_postinst:${PN} () {
 	if ${@bb.utils.contains('DISTRO_FEATURES','systemd sysvinit','true','false',d)}; then
 		if [ -n "$D" ]; then
 			OPTS="--root=$D"
@@ -47,4 +47,4 @@
 	fi
 }
 
-ALLOW_EMPTY_${PN} = "1"
+ALLOW_EMPTY:${PN} = "1"
diff --git a/poky/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb b/poky/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb
index 54c431e..5f38331 100644
--- a/poky/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb
+++ b/poky/meta/recipes-bsp/lrzsz/lrzsz_0.12.20.bb
@@ -38,7 +38,7 @@
 
 ALTERNATIVE_PRIORITY = "100"
 
-ALTERNATIVE_${PN} = "rz rx rb sz sx sb"
+ALTERNATIVE:${PN} = "rz rx rb sz sx sb"
 
 ALTERNATIVE_TARGET[rz] = "${bindir}/lrz"
 ALTERNATIVE_TARGET[rx] = "${bindir}/lrz"
diff --git a/poky/meta/recipes-bsp/opensbi/opensbi_0.9.bb b/poky/meta/recipes-bsp/opensbi/opensbi_0.9.bb
index 5fee521..cb9f346 100644
--- a/poky/meta/recipes-bsp/opensbi/opensbi_0.9.bb
+++ b/poky/meta/recipes-bsp/opensbi/opensbi_0.9.bb
@@ -17,13 +17,13 @@
 
 EXTRA_OEMAKE += "PLATFORM=${RISCV_SBI_PLAT} I=${D} FW_PIC=n"
 # If RISCV_SBI_PAYLOAD is set then include it as a payload
-EXTRA_OEMAKE_append = " ${@riscv_get_extra_oemake_image(d)}"
-EXTRA_OEMAKE_append = " ${@riscv_get_extra_oemake_fdt(d)}"
+EXTRA_OEMAKE:append = " ${@riscv_get_extra_oemake_image(d)}"
+EXTRA_OEMAKE:append = " ${@riscv_get_extra_oemake_fdt(d)}"
 
 # Required if specifying a custom payload
 do_compile[depends] += "${@riscv_get_do_compile_depends(d)}"
 
-do_install_append() {
+do_install:append() {
 	# In the future these might be required as a dependency for other packages.
 	# At the moment just delete them to avoid warnings
 	rm -r ${D}/include
@@ -39,9 +39,9 @@
 
 addtask deploy before do_build after do_install
 
-FILES_${PN} += "/share/opensbi/*/${RISCV_SBI_PLAT}/firmware/fw_jump.*"
-FILES_${PN} += "/share/opensbi/*/${RISCV_SBI_PLAT}/firmware/fw_payload.*"
-FILES_${PN} += "/share/opensbi/*/${RISCV_SBI_PLAT}/firmware/fw_dynamic.*"
+FILES:${PN} += "/share/opensbi/*/${RISCV_SBI_PLAT}/firmware/fw_jump.*"
+FILES:${PN} += "/share/opensbi/*/${RISCV_SBI_PLAT}/firmware/fw_payload.*"
+FILES:${PN} += "/share/opensbi/*/${RISCV_SBI_PLAT}/firmware/fw_dynamic.*"
 
 COMPATIBLE_HOST = "(riscv64|riscv32).*"
 INHIBIT_PACKAGE_STRIP = "1"
diff --git a/poky/meta/recipes-bsp/pciutils/pciutils_3.7.0.bb b/poky/meta/recipes-bsp/pciutils/pciutils_3.7.0.bb
index 4f0edc0..3afa521 100644
--- a/poky/meta/recipes-bsp/pciutils/pciutils_3.7.0.bb
+++ b/poky/meta/recipes-bsp/pciutils/pciutils_3.7.0.bb
@@ -52,8 +52,8 @@
 }
 
 PACKAGES =+ "${PN}-ids libpci"
-FILES_${PN}-ids = "${datadir}/pci.ids*"
-FILES_libpci = "${libdir}/libpci.so.*"
-SUMMARY_${PN}-ids = "PCI utilities - device ID database"
-DESCRIPTION_${PN}-ids = "Package providing the PCI device ID database for pciutils."
-RDEPENDS_${PN} += "${PN}-ids"
+FILES:${PN}-ids = "${datadir}/pci.ids*"
+FILES:libpci = "${libdir}/libpci.so.*"
+SUMMARY:${PN}-ids = "PCI utilities - device ID database"
+DESCRIPTION:${PN}-ids = "Package providing the PCI device ID database for pciutils."
+RDEPENDS:${PN} += "${PN}-ids"
diff --git a/poky/meta/recipes-bsp/pm-utils/pm-utils_1.4.1.bb b/poky/meta/recipes-bsp/pm-utils/pm-utils_1.4.1.bb
index cac0910..0f6d3ff 100644
--- a/poky/meta/recipes-bsp/pm-utils/pm-utils_1.4.1.bb
+++ b/poky/meta/recipes-bsp/pm-utils/pm-utils_1.4.1.bb
@@ -17,11 +17,11 @@
 
 PACKAGECONFIG[manpages] = "--enable-doc, --disable-doc, libxslt-native xmlto-native"
 
-RDEPENDS_${PN} = "grep bash"
+RDEPENDS:${PN} = "grep bash"
 
-do_configure_prepend () {
+do_configure:prepend () {
 	( cd ${S}; autoreconf -f -i -s )
 }
 
-FILES_${PN} += "${libdir}/${BPN}/*"
-FILES_${PN}-dbg += "${datadir}/doc/pm-utils/README.debugging"
+FILES:${PN} += "${libdir}/${BPN}/*"
+FILES:${PN}-dbg += "${datadir}/doc/pm-utils/README.debugging"
diff --git a/poky/meta/recipes-bsp/u-boot/libubootenv_0.3.2.bb b/poky/meta/recipes-bsp/u-boot/libubootenv_0.3.2.bb
index 3062969..ce14bc4 100644
--- a/poky/meta/recipes-bsp/u-boot/libubootenv_0.3.2.bb
+++ b/poky/meta/recipes-bsp/u-boot/libubootenv_0.3.2.bb
@@ -21,10 +21,6 @@
 
 DEPENDS = "zlib"
 PROVIDES += "u-boot-fw-utils"
-RPROVIDES_${PN}-bin += "u-boot-fw-utils"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-RRECOMMENDS_${PN}-bin_append_class-target = " u-boot-default-env"
+RPROVIDES:${PN}-bin += "u-boot-fw-utils"
 
 BBCLASSEXTEND = "native"
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot-tools.inc b/poky/meta/recipes-bsp/u-boot/u-boot-tools.inc
index 4ed936a..7eda6a0 100644
--- a/poky/meta/recipes-bsp/u-boot/u-boot-tools.inc
+++ b/poky/meta/recipes-bsp/u-boot/u-boot-tools.inc
@@ -2,25 +2,25 @@
 DEPENDS += "openssl"
 
 PROVIDES = "${MLPREFIX}u-boot-mkimage ${MLPREFIX}u-boot-mkenvimage"
-PROVIDES_class-native = "u-boot-mkimage-native u-boot-mkenvimage-native"
+PROVIDES:class-native = "u-boot-mkimage-native u-boot-mkenvimage-native"
 
 PACKAGES += "${PN}-mkimage ${PN}-mkenvimage"
 
 # Required for backward compatibility with "u-boot-mkimage-xxx.bb"
-RPROVIDES_${PN}-mkimage = "u-boot-mkimage"
-RREPLACES_${PN}-mkimage = "u-boot-mkimage"
-RCONFLICTS_${PN}-mkimage = "u-boot-mkimage"
+RPROVIDES:${PN}-mkimage = "u-boot-mkimage"
+RREPLACES:${PN}-mkimage = "u-boot-mkimage"
+RCONFLICTS:${PN}-mkimage = "u-boot-mkimage"
 
-EXTRA_OEMAKE_class-target = 'CROSS_COMPILE="${TARGET_PREFIX}" CC="${CC} ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1'
-EXTRA_OEMAKE_class-native = 'CC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1'
-EXTRA_OEMAKE_class-nativesdk = 'CROSS_COMPILE="${HOST_PREFIX}" CC="${CC} ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1'
+EXTRA_OEMAKE:class-target = 'CROSS_COMPILE="${TARGET_PREFIX}" CC="${CC} ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1'
+EXTRA_OEMAKE:class-native = 'CC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1'
+EXTRA_OEMAKE:class-nativesdk = 'CROSS_COMPILE="${HOST_PREFIX}" CC="${CC} ${CFLAGS} ${LDFLAGS}" HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}" STRIP=true V=1'
 
 SED_CONFIG_EFI = '-e "s/CONFIG_EFI_LOADER=.*/# CONFIG_EFI_LOADER is not set/"'
-SED_CONFIG_EFI_x86 = ''
-SED_CONFIG_EFI_x86-64 = ''
-SED_CONFIG_EFI_arm = ''
-SED_CONFIG_EFI_armeb = ''
-SED_CONFIG_EFI_aarch64 = ''
+SED_CONFIG_EFI:x86 = ''
+SED_CONFIG_EFI:x86-64 = ''
+SED_CONFIG_EFI:arm = ''
+SED_CONFIG_EFI:armeb = ''
+SED_CONFIG_EFI:aarch64 = ''
 
 do_compile () {
 	# Yes, this is crazy. If you build on a system with git < 2.14 from scratch, the tree will
@@ -68,14 +68,14 @@
 	ln -sf uboot-fit_check_sign ${D}${bindir}/fit_check_sign
 }
 
-ALLOW_EMPTY_${PN} = "1"
-FILES_${PN} = ""
-FILES_${PN}-mkimage = "${bindir}/uboot-mkimage ${bindir}/mkimage ${bindir}/uboot-dumpimage ${bindir}/dumpimage ${bindir}/uboot-fit_check_sign ${bindir}/fit_check_sign"
-FILES_${PN}-mkenvimage = "${bindir}/uboot-mkenvimage ${bindir}/mkenvimage"
+ALLOW_EMPTY:${PN} = "1"
+FILES:${PN} = ""
+FILES:${PN}-mkimage = "${bindir}/uboot-mkimage ${bindir}/mkimage ${bindir}/uboot-dumpimage ${bindir}/dumpimage ${bindir}/uboot-fit_check_sign ${bindir}/fit_check_sign"
+FILES:${PN}-mkenvimage = "${bindir}/uboot-mkenvimage ${bindir}/mkenvimage"
 
-RDEPENDS_${PN}-mkimage += "dtc"
-RDEPENDS_${PN} += "${PN}-mkimage ${PN}-mkenvimage"
-RDEPENDS_${PN}_class-native = ""
+RDEPENDS:${PN}-mkimage += "dtc"
+RDEPENDS:${PN} += "${PN}-mkimage ${PN}-mkenvimage"
+RDEPENDS:${PN}:class-native = ""
 
 BBCLASSEXTEND = "native nativesdk"
 
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.07.bb b/poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.07.bb
index 4e90081..d0c0f30 100644
--- a/poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.07.bb
+++ b/poky/meta/recipes-bsp/u-boot/u-boot-tools_2021.07.bb
@@ -1,4 +1,4 @@
 require u-boot-common.inc
 require u-boot-tools.inc
 
-SRC_URI_append = " file://0001-tools-image-host-fix-wrong-return-value.patch"
+SRC_URI:append = " file://0001-tools-image-host-fix-wrong-return-value.patch"
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot.inc b/poky/meta/recipes-bsp/u-boot/u-boot.inc
index 8ccc532..4340b17 100644
--- a/poky/meta/recipes-bsp/u-boot/u-boot.inc
+++ b/poky/meta/recipes-bsp/u-boot/u-boot.inc
@@ -212,15 +212,15 @@
 
 PACKAGE_BEFORE_PN += "${PN}-env"
 
-RPROVIDES_${PN}-env += "u-boot-default-env"
-ALLOW_EMPTY_${PN}-env = "1"
-FILES_${PN}-env = " \
+RPROVIDES:${PN}-env += "u-boot-default-env"
+ALLOW_EMPTY:${PN}-env = "1"
+FILES:${PN}-env = " \
     ${@ '${sysconfdir}/${UBOOT_INITIAL_ENV}*' if d.getVar('UBOOT_INITIAL_ENV') else ''} \
     ${sysconfdir}/fw_env.config \
 "
 
-FILES_${PN} = "/boot ${datadir}"
-RDEPENDS_${PN} += "${PN}-env"
+FILES:${PN} = "/boot ${datadir}"
+RDEPENDS:${PN} += "${PN}-env"
 
 do_deploy () {
     if [ -n "${UBOOT_CONFIG}" ]
diff --git a/poky/meta/recipes-bsp/u-boot/u-boot_2021.07.bb b/poky/meta/recipes-bsp/u-boot/u-boot_2021.07.bb
index bbbc99b..c8dbe47 100644
--- a/poky/meta/recipes-bsp/u-boot/u-boot_2021.07.bb
+++ b/poky/meta/recipes-bsp/u-boot/u-boot_2021.07.bb
@@ -1,6 +1,6 @@
 require u-boot-common.inc
 require u-boot.inc
 
-SRC_URI_append = " file://0001-riscv32-Use-double-float-ABI-for-rv32.patch"
+SRC_URI:append = " file://0001-riscv32-Use-double-float-ABI-for-rv32.patch"
 
 DEPENDS += "bc-native dtc-native python3-setuptools-native"
diff --git a/poky/meta/recipes-bsp/usbutils/usbutils_013.bb b/poky/meta/recipes-bsp/usbutils/usbutils_013.bb
index 51f909b..db64a48 100644
--- a/poky/meta/recipes-bsp/usbutils/usbutils_013.bb
+++ b/poky/meta/recipes-bsp/usbutils/usbutils_013.bb
@@ -16,15 +16,15 @@
 
 inherit autotools pkgconfig update-alternatives
 
-ALTERNATIVE_${PN} = "lsusb"
+ALTERNATIVE:${PN} = "lsusb"
 ALTERNATIVE_PRIORITY = "100"
 
 # The binaries are mostly GPLv2+ apart from lsusb.py which is GPLv2 or v3.
-LICENSE_${PN} = "GPLv2+"
-LICENSE_${PN}-python = "GPLv2 | GPLv3"
+LICENSE:${PN} = "GPLv2+"
+LICENSE:${PN}-python = "GPLv2 | GPLv3"
 
-RRECOMMENDS_${PN} = "udev-hwdb"
+RRECOMMENDS:${PN} = "udev-hwdb"
 
 PACKAGE_BEFORE_PN =+ "${PN}-python"
-FILES_${PN}-python += "${bindir}/lsusb.py"
-RDEPENDS_${PN}-python = "python3-core"
+FILES:${PN}-python += "${bindir}/lsusb.py"
+RDEPENDS:${PN}-python = "python3-core"
diff --git a/poky/meta/recipes-bsp/v86d/v86d_0.1.10.bb b/poky/meta/recipes-bsp/v86d/v86d_0.1.10.bb
index e614de0..b011276 100644
--- a/poky/meta/recipes-bsp/v86d/v86d_0.1.10.bb
+++ b/poky/meta/recipes-bsp/v86d/v86d_0.1.10.bb
@@ -7,7 +7,7 @@
 LIC_FILES_CHKSUM = "file://README;md5=94ac1971e4f2309dc322d598e7b1f7dd"
 
 DEPENDS = "virtual/kernel"
-RRECOMMENDS_${PN} = "kernel-module-uvesafb"
+RRECOMMENDS:${PN} = "kernel-module-uvesafb"
 PR = "r2"
 
 SRC_URI = "http://snapshot.debian.org/archive/debian/20110427T035506Z/pool/main/v/${BPN}/${BPN}_${PV}.orig.tar.gz \