subtree updates
meta-arm: 14c7e5b336..3b7347cd67:
Jon Mason (6):
CI: Remove host bitbake variables
arm: add Mickledore to layer compat string
CI: Add packages for opencsd and gator-daemon to base build
CI: add common fvp yml file
arm/opencsd: update to version 1.3.1
arm/gator-daemon: update to v7.8.0
Jose Quaresma (2):
optee-ftpm/optee-os: add missing space in EXTRA_OEMAKE
optee-os-ts: avoid using escape chars in EXTRA_OEMAKE
Mohamed Omar Asaker (4):
Revert "arm-bsp/trusted-firmware-m: corstone1000: secure debug code checkout from yocto"
Revert "arm-bsp/trusted-firmware-m: corstone1000: bump tfm SHA"
arm-bsp/trusted-firmware-m: corstone1000 support FMP image info
arm-bsp/corstone1000: add msd configs for fvp
Ross Burton (5):
arm/hafnium: add missing Upstream-Status
arm-bsp/hafnium: add missing Upstream-Status
arm-bsp/linux-arm64-ack: fix malformed Upstream-Status tag
CI: add documentation job
CI: track meta-openembedded's langdale branch
Rui Miguel Silva (2):
arm/trusted-services: port crypto config
arm-bsp/corstone1000: apply ts patch to psa crypto api test
Satish Kumar (1):
arm-bsp/trusted-service: corstone1000: esrt support
Vishnu Banavath (4):
runfvp: corstone1000: add mmc card configuration
meta-arm-bsp/doc: add readthedocs for corstone1000
arm-bsp/optee: register DRAM1 for N1SDP target
arm-bsp:optee: enable optee test for N1SDP target
meta-raspberrypi: 722c51647c..a305f4804b:
Sung Gon Kim (1):
libcamera: rename bbappend to match any version
meta-openembedded: 8073ec2275..6ebff843cc:
Akash Hadke (1):
audit: Fix compile error for audit_2.8.5
Alex Kiernan (1):
lldpd: Upgrade 1.0.14 -> 1.0.15
Alexander Kanavin (3):
sip3: remove the recipe
python3-wxgtk4: skip the recipe
python3-yappi: mark as incompatible with python 3.11
Bhupesh Sharma (1):
android-tools-conf-configfs: Allow handling two or more UDC controllers
Eero Aaltonen (1):
valijson: use install task from CMakeLists.txt
Etienne Cordonnier (1):
uutils-coreutils: upgrade 0.0.15 -> 0.0.16
Gianfranco Costamagna (2):
vboxguestdrivers: upgrade 6.1.38 -> 7.0.0
vbxguestdrivers: upgrade 7.0.0 -> 7.0.2
Joshua Watt (3):
nginx: Add ipv6 support
iniparser: Add native support
libzip: Add native support
Khem Raj (3):
postfix: Upgrade to 3.7.3
msktutil: Add recipe
protobuf: Enable protoc binary in nativesdk
Leon Anavi (7):
python3-cheetah: Upgrade 3.2.6 -> 3.2.6.post1
python3-dill: Upgrade 0.3.5.1 -> 0.3.6
python3-pythonping: Upgrade 1.1.3 -> 1.1.4
python3-colorama: Upgrade 0.4.5 -> 0.4.6
python3-pint: Upgrade 0.19.2 -> 0.20
python3-traitlets: Upgrade 5.4.0 -> 5.5.0
python3-py-cpuinfo: Upgrade 8.0.0 -> 9.0.0
Markus Volk (4):
perfetto: build libperfetto
libcamera: upgrade -> 0.0.1
gtk-vnc: add recipe
spice-gtk: add recipe
Meier Boas (1):
jwt-cpp: add recipe
Ovidiu Panait (1):
syzkaller: add recipe and selftest for syzkaller fuzzing
Peter Marko (2):
cpputest: remove dev package dependency
cpputest: add possibility to build extensions
Robert Joslyn (1):
fwupd: Fix plugin_gpio PACKAGECONFIG
Sebastian Trahm (1):
Add recipe for python3-pytest-json-report
Tim Orling (5):
libmime-types-perl: upgrade 2.17 -> 2.22
libcompress-raw*-perl: move from libio/compress-*
libio-compress*-perl: cleanup; fixes
libcompress-raw-*-perl: cleanup; fixes
packagegroup-meta-perl: mv libcompress-raw-*-perl
Vincent Davis Jr (2):
libglvnd: add new recipe libglvnd v1.5.0
xf86-video-amdgpu: add new recipe xf86-video-amdgpu
Wang Mingyu (36):
bats: upgrade 1.8.0 -> 1.8.2
ctags: upgrade 5.9.20221009.0 -> 5.9.20221016.0
fvwm: upgrade 2.6.9 -> 2.7.0
makedumpfile: upgrade 1.7.1 -> 1.7.2
sanlock: upgrade 3.8.4 -> 3.8.5
python3-astroid: upgrade 2.12.11 -> 2.12.12
python3-charset-normalizer: upgrade 2.1.1 -> 3.0.0
python3-google-api-python-client: upgrade 2.64.0 -> 2.65.0
python3-google-auth: upgrade 2.12.0 -> 2.13.0
python3-grpcio-tools: upgrade 1.49.1 -> 1.50.0
python3-grpcio: upgrade 1.49.1 -> 1.50.0
python3-huey: upgrade 2.4.3 -> 2.4.4
python3-incremental: upgrade 21.3.0 -> 22.10.0
python3-luma-core: upgrade 2.3.1 -> 2.4.0
python3-oauthlib: upgrade 3.2.1 -> 3.2.2
python3-pandas: upgrade 1.5.0 -> 1.5.1
python3-pastedeploy: upgrade 2.1.1 -> 3.0.1
python3-pika: upgrade 1.3.0 -> 1.3.1
python3-portalocker: upgrade 2.5.1 -> 2.6.0
python3-protobuf: upgrade 4.21.7 -> 4.21.8
python3-pyjwt: upgrade 2.5.0 -> 2.6.0
python3-pymongo: upgrade 4.2.0 -> 4.3.2
python3-pywbemtools: upgrade 1.0.0 -> 1.0.1
python3-robotframework: upgrade 5.0.1 -> 6.0
python3-socketio: upgrade 5.7.1 -> 5.7.2
python3-sqlalchemy: upgrade 1.4.41 -> 1.4.42
tracker-miners: upgrade 3.2.1 -> 3.4.1
tracker: upgrade 3.4.0 -> 3.4.1
wolfssl: upgrade 5.5.1 -> 5.5.2
cglm: upgrade 0.8.5 -> 0.8.7
ctags: upgrade 5.9.20221016.0 -> 5.9.20221023.0
flatbuffers: upgrade 22.9.29 -> 22.10.26
function2: upgrade 4.2.1 -> 4.2.2
poco: upgrade 1.12.2 -> 1.12.3
thingsboard-gateway: upgrade 3.1 -> 3.2
grpc: upgrade 1.50.0 -> 1.50.1
Xiangyu Chen (1):
ipmitool: fix typo in .bb file's comments, using = instead of =?
Zheng Qiu (1):
jq: improve ptest and disable valgrind by default
zhengruoqin (5):
tcpslice: upgrade 1.5 -> 1.6
tio: upgrade 2.1 -> 2.2
python3-stevedore: upgrade 4.0.1 -> 4.1.0
python3-xxhash: upgrade 3.0.0 -> 3.1.0
python3-zeroconf: upgrade 0.39.1 -> 0.39.2
meta-security: e8e7318189..2aa48e6f4e:
Armin Kuster (1):
kas-security-base.yml: make work again
Gowtham Suresh Kumar (1):
Update PARSEC recipe to latest v1.1.0 release
Michael Haener (1):
tpm2-openssl: update to 1.1.1
poky: 95c802b0be..482c493cf6:
Adrian Freihofer (3):
own-mirrors: add crate
buildconf: compare abspath
ref-manual: add wic command bootloader ptable option
Ahmad Fatoum (2):
kernel-fitimage: mangle slashes to underscores as late as possible
kernel-fitimage: skip FDT section creation for applicable symlinks
Alex Kiernan (4):
u-boot: Remove duplicate inherit of cml1
u-boot: Add savedefconfig task
rust: update 1.63.0 -> 1.64.0
cargo_common.bbclass: Fix typos
Alexander Kanavin (40):
rust-target-config: match riscv target names with what rust expects
rust: install rustfmt for riscv32 as well
unfs3: correct upstream version check
gnu-config: update to latest revision
llvm: update 14.0.6 -> 15.0.1
grep: update 3.7 -> 3.8
hdparm: update 9.64 -> 9.65
stress-ng: update 0.14.03 -> 0.14.06
vulkan: update 1.3.216.0 -> 1.3.224.1
wayland-utils: update 1.0.0 -> 1.1.0
libxft: update 2.3.4 -> 2.3.6
pinentry: update 1.2.0 -> 1.2.1
ovmf: upgrade edk2-stable202205 -> edk2-stable202208
cmake: update 3.24.0 -> 3.24.2
jquery: upgrade 3.6.0 -> 3.6.1
python3-dbus: upgrade 1.2.18 -> 1.3.2
python3-hatch-fancy-pypi-readme: add a recipe
python3-jsonschema: upgrade 4.9.1 -> 4.16.0
shadow: update 4.12.1 -> 4.12.3
lttng-modules: upgrade 2.13.4 -> 2.13.5
libsoup: upgrade 3.0.7 -> 3.2.0
libxslt: upgrade 1.1.35 -> 1.1.37
quilt: backport a patch to address grep 3.8 failures
python3: update 3.10.6 -> 3.11.0
cargo-update-recipe-crates.bbclass: add a class to generate SRC_URI crate lists from Cargo.lock
python3-bcrypt: convert to use cargo-update-recipe-crates class.
python3-cryptography: convert to cargo-update-recipe-crates class
groff: submit patches upstream
tcl: correct patch status
tcl: correct upstream version check
lttng-tools: submit determinism.patch upstream
cmake: drop qt4 patches
kea: submit patch upstream
argp-standalone: replace with a maintained fork
ovmf: correct patches status
go: submit patch upstream
libffi: submit patch upstream
go: update 1.19 -> 1.19.2
rust-common.bbclass: use built-in rust targets for -native builds
rust: submit a rewritten version of crossbeam_atomic.patch upstream
Andrew Geissler (1):
go: add support to build on ppc64le
Bartosz Golaszewski (1):
bluez5: add dbus to RDEPENDS
Bernhard Rosenkränzer (1):
cmake-native: Fix host tool contamination
Bruce Ashfield (3):
kern-tools: fix relative path processing
linux-yocto/5.19: update to v5.19.14
linux-yocto/5.15: update to v5.15.72
Changhyeok Bae (2):
ethtool: upgrade 5.19 -> 6.0
iproute2: upgrade 5.19.0 -> 6.0.0
Chen Qi (1):
openssl: export necessary env vars in SDK
Christian Eggers (1):
linux-firmware: split rtl8761 firmware
Claus Stovgaard (1):
gstreamer1.0-libav: fix errors with ffmpeg 5.x
Ed Tanous (1):
openssl: Upgrade 3.0.5 -> 3.0.7
Etienne Cordonnier (1):
mirrors.bbclass: use shallow tarball for binutils-native
Fabio Estevam (1):
go-mod.bbclass: Remove repeated word
Frank de Brabander (1):
cve-update-db-native: add timeout to urlopen() calls
Hitendra Prajapati (1):
openssl: CVE-2022-3358 Using a Custom Cipher with NID_undef may lead to NULL encryption
Jan-Simon Moeller (1):
buildtools-tarball: export certificates to python and curl
Jeremy Puhlman (1):
qemu-native: Add PACKAGECONFIG option for jack
Johan Korsnes (1):
bitbake: bitbake: user-manual: inform about spaces in :remove
Jon Mason (2):
linux-yocto: add efi entry for machine features
linux-yocto-dev: add qemuarmv5
Jose Quaresma (3):
kernel-yocto: improve fatal error messages of symbol_why.py
oeqa/selftest/archiver: Add multiconfig test for shared recipes
archiver: avoid using machine variable as it breaks multiconfig
Joshua Watt (3):
runqemu: Fix gl-es argument from causing other arguments to be ignored
qemu-helper-native: Re-write bridge helper as C program
runqemu: Do not perturb script environment
Justin Bronder (1):
bitbake: asyncrpc: serv: correct closed client socket detection
Kai Kang (1):
mesa: only apply patch to fix ALWAYS_INLINE for native
Keiya Nobuta (2):
gnutls: Unified package names to lower-case
create-spdx: Remove ";name=..." for downloadLocation
Khem Raj (3):
perf: Depend on native setuptools3
musl: Upgrade to latest master
mesa: Add native patch via a variable
Lee Chee Yang (2):
migration-guides/release-notes-4.1.rst: update Repositories / Downloads
migration-guides/release-notes-4.1.rst: update Repositories / Downloads
Leon Anavi (1):
python3-manifest.json: Move urllib to netclient
Liam Beguin (1):
meson: make wrapper options sub-command specific
Luca Boccassi (1):
systemd: add systemd-creds and systemd-cryptenroll to systemd-extra-utils
Marek Vasut (1):
bluez5: Point hciattach bcm43xx firmware search path to /lib/firmware
Mark Asselstine (2):
bitbake: tests: bb.tests.fetch.URLHandle: add 2 new tests
bitbake: bitbake: bitbake-layers: checkout layer(s) branch when clone exists
Mark Hatle (2):
insane.bbclass: Allow hashlib version that only accepts on parameter
bitbake: utils/ply: Update md5 to better report errors with hashlib
Markus Volk (2):
wayland-protocols: upgrade 1.26 -> 1.27
mesa: update 22.2.0 -> 22.2.2
Martin Jansa (3):
vulkan-samples: add lfs=0 to SRC_URI to avoid git smudge errors in do_unpack
externalsrc.bbclass: fix git repo detection
cargo-update-recipe-crates: small improvements
Maxim Uvarov (2):
wic: add UEFI kernel as UEFI stub
wic: bootimg-efi: implement --include-path
Michael Opdenacker (11):
manuals: updates for building on Windows (WSL 2)
ref-manual: classes.rst: add links to all references to a class
poky.conf: remove Ubuntu 21.10
bitbake: doc: bitbake-user-manual: expand description of BB_PRESSURE_MAX variables
bitbake: bitbake-user-manual: details about variable flags starting with underscore
Documentation/README: formalize guidelines for external link syntax
manuals: replace "_" by "__" in external links
manuals: stop referring to the meta-openembedded repo from GitHub
manuals: add missing references to SDKMACHINE and SDK_ARCH
manuals: use references to the "Build Directory" term
create-spdx.bbclass: remove unused SPDX_INCLUDE_PACKAGED
Mikko Rapeli (6):
os-release: replace DISTRO_CODENAME with VERSION_CODENAME
os-release: add HOMEPAGE and link to documentation
ref-manual: variables.rst: add documentation for CVE_VERSION
ref-manual: classes.rst: improve documentation for cve-check.bbclass
dev-manual: common-tasks.rst: add regular updates and CVE scans to security best practices
dev-manual: common-tasks.rst: refactor and improve "Checking for Vulnerabilities" section
Ming Liu (1):
dropbear: add pam to PACKAGECONFIG
Mingli Yu (1):
grub: disable build on armv7ve/a with hardfp
Oliver Lang (2):
bitbake: cooker: fix a typo
bitbake: runqueue: fix a typo
Pablo Saavedra Rodi?o (1):
weston: update 10.0.2 -> 11.0.0
Paul Eggleton (2):
install-buildtools: support buildtools-make-tarball and update to 4.1
ref-manual: add info on buildtools-make-tarball
Peter Bergin (1):
gptfdisk: remove warning message from target system
Peter Kjellerstedt (3):
gcc: Allow -Wno-error=poison-system-directories to take effect
base-passwd: Update to 3.6.1
externalsrc.bbclass: Remove a trailing slash from ${B}
Qiu, Zheng (2):
tiff: fix a typo for CVE-2022-2953.patch
valgrind: update to 3.20.0
Quentin Schulz (1):
docs: add support for langdale (4.1) release
Richard Purdie (4):
openssl: Fix SSL_CERT_FILE to match ca-certs location
bitbake: tests/fetch: Allow handling of a file:// url within a submodule
patchelf: upgrade 0.15.0 -> 0.16.1
lttng-modules: upgrade 2.13.5 -> 2.13.7
Robert Joslyn (1):
curl: Update 7.85.0 to 7.86.0
Ross Burton (26):
populate_sdk_base: ensure ptest-pkgs pulls in ptest-runner
scripts/oe-check-sstate: cleanup
scripts/oe-check-sstate: force build to run for all targets, specifically populate_sysroot
externalsrc: move back to classes
opkg-utils: use a git clone, not a dynamic snapshot
oe/packagemanager/rpm: don't leak file objects
zlib: use .gz archive and set a PREMIRROR
glib-2.0: fix rare GFileInfo test case failure
lighttpd: fix CVE-2022-41556
acpid: upgrade 2.0.33 -> 2.0.34
python3-hatchling: upgrade 1.9.0 -> 1.10.0
pango: upgrade 1.50.9 -> 1.50.10
piglit: upgrade to latest revision
lsof: upgrade 4.95.0 -> 4.96.3
zlib: do out-of-tree builds
zlib: upgrade 1.2.12 -> 1.2.13
libx11: apply the fix for CVE-2022-3554
xserver-xorg: ignore CVE-2022-3553 as it is XQuartz-specific
xserver-xorg: backport fixes for CVE-2022-3550 and CVE-2022-3551
tiff: fix a number of CVEs
qemu: backport the fix for CVE-2022-3165
bitbake: fetch2/git: don't set core.fsyncobjectfiles=0
sanity: check for GNU tar specifically
expat: upgrade to 2.5.0
oeqa/target/ssh: add ignore_status argument to run()
oeqa/runtime/dnf: rewrite test_dnf_installroot_usrmerge
Sakib Sajal (1):
go: update 1.19.2 -> 1.19.3
Sean Anderson (6):
uboot-sign: Fix using wrong KEY_REQ_ARGS
kernel: Clear SYSROOT_DIRS instead of replacing sysroot_stage_all
kernel-fitimage: Use KERNEL_OUTPUT_DIR where appropriate
uboot-sign: Use bitbake variables directly
uboot-sign: Split off kernel-fitimage variables
u-boot: Rework signing to remove interdependencies
Sergei Zhmylev (2):
wic: implement binary repeatable disk identifiers
wic: honor the SOURCE_DATE_EPOCH in case of updated fstab
Teoh Jay Shen (1):
vim: Upgrade 9.0.0598 -> 9.0.0614
Thomas Perrot (2):
psplash: add psplash-default in rdepends
xserver-xorg: move some recommended dependencies in required
Tim Orling (23):
python3-cryptography: upgrade 37.0.4 -> 38.0.1
python3-cryptography-vectors: upgrade 37.0.4 -> 38.0.1
python3-certifi: upgrade 2022.9.14 -> 2022.9.24
python3-hypothesis: upgrade 6.54.5 -> 6.56.1
python3-pyopenssl: upgrade 22.0.0 -> 22.1.0
python3-bcrypt: upgrade 3.2.2 -> 4.0.0
python3-sphinx: upgrade 5.1.1 -> 5.2.3
python3-setuptools-rust: upgrade 1.5.1 -> 1.5.2
python3-iso8601: upgrade 1.0.2 -> 1.1.0
python3-poetry-core: upgrade 1.0.8 -> 1.3.2
git: upgrade 2.37.3 -> 2.38.1
vim: upgrade 9.0.0614 -> 9.0.0820
python3-mako: upgrade 1.2.2 -> 1.2.3
python3-bcrypt: upgrade 4.0.0 -> 4.0.1
python3-cryptography{-vectors}: 38.0.1 -> 38.0.3
python3-psutil: upgrade 5.9.2 -> 5.9.3
python3-pytest: upgrade 7.1.3 -> 7.2.0
python3-pytest-subtests: upgrade 0.8.0 -> 0.9.0
python3-hypothesis: upgrade 6.56.1 -> 6.56.4
python3-more-itertools: upgrade 8.14.0 -> 9.0.0
python3-pytz: upgrade 2022.4 -> 2022.6
python3-zipp: upgrade 3.9.0 -> 3.10.0
python3-sphinx: upgrade 5.2.3 -> 5.3.0
Vincent Davis Jr (1):
linux-firmware: package amdgpu firmware
Vyacheslav Yurkov (1):
overlayfs: Allow not used mount points
Xiangyu Chen (1):
linux-yocto-dev: add qemuarm64
Yan Xinkuan (1):
bc: Add ptest.
ciarancourtney (1):
wic: swap partitions are not added to fstab
wangmy (32):
init-system-helpers: upgrade 1.64 -> 1.65.2
meson: upgrade 0.63.2 -> 0.63.3
mtools: upgrade 4.0.40 -> 4.0.41
dbus: upgrade 1.14.0 -> 1.14.4
ifupdown: upgrade 0.8.37 -> 0.8.39
openssh: upgrade 9.0p1 -> 9.1p1
python3-hatchling: upgrade 1.10.0 -> 1.11.0
u-boot: upgrade 2022.07 -> 2022.10
python3-git: upgrade 3.1.27 -> 3.1.28
python3-importlib-metadata: upgrade 4.12.0 -> 5.0.0
gnutls: upgrade 3.7.7 -> 3.7.8
gsettings-desktop-schemas: upgrade 42.0 -> 43.0
harfbuzz: upgrade 5.1.0 -> 5.3.0
libcap: upgrade 2.65 -> 2.66
libical: upgrade 3.0.14 -> 3.0.15
libva: upgrade 2.15.0 -> 2.16.0
libva-utils: upgrade 2.15.0 -> 2.16.0
powertop: upgrade 2.14 -> 2.15
numactl: upgrade 2.0.15 -> 2.0.16
python3-pytz: upgrade 2022.2.1 -> 2022.4
python3-zipp: upgrade 3.8.1 -> 3.9.0
repo: upgrade 2.29.2 -> 2.29.3
sqlite3: upgrade 3.39.3 -> 3.39.4
wpebackend-fdo: upgrade 1.12.1 -> 1.14.0
xkeyboard-config: upgrade 2.36 -> 2.37
xz: upgrade 5.2.6 -> 5.2.7
libksba: upgrade 1.6.0 -> 1.6.2
libsdl2: upgrade 2.24.0 -> 2.24.1
libwpe: upgrade 1.12.3 -> 1.14.0
lttng-ust: upgrade 2.13.4 -> 2.13.5
btrfs-tools: upgrade 5.19.1 -> 6.0
lighttpd: upgrade 1.4.66 -> 1.4.67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I3322dd0057da9f05bb2ba216fdcda3f569c0493b
diff --git a/poky/meta/recipes-devtools/python/python3_3.11.0.bb b/poky/meta/recipes-devtools/python/python3_3.11.0.bb
new file mode 100644
index 0000000..6b6c983
--- /dev/null
+++ b/poky/meta/recipes-devtools/python/python3_3.11.0.bb
@@ -0,0 +1,430 @@
+SUMMARY = "The Python Programming Language"
+HOMEPAGE = "http://www.python.org"
+DESCRIPTION = "Python is a programming language that lets you work more quickly and integrate your systems more effectively."
+LICENSE = "PSF-2.0"
+SECTION = "devel/python"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=4b8801e752a2c70ac41a5f9aa243f766"
+
+SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
+ file://run-ptest \
+ file://create_manifest3.py \
+ file://get_module_deps3.py \
+ file://python3-manifest.json \
+ file://check_build_completeness.py \
+ file://reformat_sysconfig.py \
+ file://cgi_py.patch \
+ file://0001-Do-not-add-usr-lib-termcap-to-linker-flags-to-avoid-.patch \
+ ${@bb.utils.contains('PACKAGECONFIG', 'tk', '', 'file://avoid_warning_about_tkinter.patch', d)} \
+ file://0001-Do-not-use-the-shell-version-of-python-config-that-w.patch \
+ file://python-config.patch \
+ file://0001-Makefile.pre-use-qemu-wrapper-when-gathering-profile.patch \
+ file://0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch \
+ file://0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch \
+ file://crosspythonpath.patch \
+ file://0001-test_locale.py-correct-the-test-output-format.patch \
+ file://0017-setup.py-do-not-report-missing-dependencies-for-disa.patch \
+ file://0001-Makefile-do-not-compile-.pyc-in-parallel.patch \
+ file://0020-configure.ac-setup.py-do-not-add-a-curses-include-pa.patch \
+ file://0001-Skip-failing-tests-due-to-load-variability-on-YP-AB.patch \
+ file://0001-test_ctypes.test_find-skip-without-tools-sdk.patch \
+ file://makerace.patch \
+ file://0001-sysconfig.py-use-platlibdir-also-for-purelib.patch \
+ file://0001-Lib-pty.py-handle-stdin-I-O-errors-same-way-as-maste.patch \
+ file://0001-setup.py-Do-not-detect-multiarch-paths-when-cross-co.patch \
+ file://deterministic_imports.patch \
+ file://0001-Avoid-shebang-overflow-on-python-config.py.patch \
+ "
+
+SRC_URI:append:class-native = " \
+ file://0001-Lib-sysconfig.py-use-prefix-value-from-build-configu.patch \
+ file://0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch \
+ file://12-distutils-prefix-is-inside-staging-area.patch \
+ file://0001-Don-t-search-system-for-headers-libraries.patch \
+ "
+SRC_URI[sha256sum] = "a57dc82d77358617ba65b9841cee1e3b441f386c3789ddc0676eca077f2951c3"
+
+# exclude pre-releases for both python 2.x and 3.x
+UPSTREAM_CHECK_REGEX = "[Pp]ython-(?P<pver>\d+(\.\d+)+).tar"
+UPSTREAM_CHECK_URI = "https://www.python.org/downloads/source/"
+
+CVE_PRODUCT = "python"
+
+# Upstream consider this expected behaviour
+CVE_CHECK_IGNORE += "CVE-2007-4559"
+# This is not exploitable when glibc has CVE-2016-10739 fixed.
+CVE_CHECK_IGNORE += "CVE-2019-18348"
+# These are specific to Microsoft Windows
+CVE_CHECK_IGNORE += "CVE-2020-15523 CVE-2022-26488"
+# The mailcap module is insecure by design, so this can't be fixed in a meaningful way.
+# The module will be removed in the future and flaws documented.
+CVE_CHECK_IGNORE += "CVE-2015-20107"
+
+PYTHON_MAJMIN = "3.11"
+
+S = "${WORKDIR}/Python-${PV}"
+
+BBCLASSEXTEND = "native nativesdk"
+
+inherit autotools pkgconfig qemu ptest multilib_header update-alternatives
+
+MULTILIB_SUFFIX = "${@d.getVar('base_libdir',1).split('/')[-1]}"
+
+ALTERNATIVE:${PN}-dev = "python3-config"
+ALTERNATIVE_LINK_NAME[python3-config] = "${bindir}/python${PYTHON_MAJMIN}-config"
+ALTERNATIVE_TARGET[python3-config] = "${bindir}/python${PYTHON_MAJMIN}-config-${MULTILIB_SUFFIX}"
+
+
+DEPENDS = "bzip2-replacement-native libffi bzip2 openssl sqlite3 zlib virtual/libintl xz virtual/crypt util-linux-libuuid libtirpc libnsl2 autoconf-archive-native ncurses"
+DEPENDS:append:class-target = " python3-native"
+DEPENDS:append:class-nativesdk = " python3-native"
+
+EXTRA_OECONF = " --without-ensurepip --enable-shared --with-platlibdir=${baselib}"
+EXTRA_OECONF:append:class-native = " --bindir=${bindir}/${PN}"
+EXTRA_OECONF:append:class-target = " --with-build-python=nativepython3"
+EXTRA_OECONF:append:class-nativesdk = " --with-build-python=nativepython3"
+
+export CROSSPYTHONPATH="${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/"
+
+EXTRANATIVEPATH += "python3-native"
+
+# LTO will be enabled via packageconfig depending upong distro features
+LTO:class-target = ""
+
+CACHED_CONFIGUREVARS = " \
+ ac_cv_file__dev_ptmx=yes \
+ ac_cv_file__dev_ptc=no \
+ ac_cv_working_tzset=yes \
+"
+
+# PGO currently causes builds to not be reproducible so disable by default, see YOCTO #13407
+PACKAGECONFIG:class-target ??= "readline gdbm ${@bb.utils.filter('DISTRO_FEATURES', 'lto', d)}"
+PACKAGECONFIG:class-native ??= "readline gdbm"
+PACKAGECONFIG:class-nativesdk ??= "readline gdbm"
+PACKAGECONFIG[readline] = ",,readline"
+PACKAGECONFIG[editline] = "--with-readline=editline,,libedit,,,readline"
+# Use profile guided optimisation by running PyBench inside qemu-user
+PACKAGECONFIG[pgo] = "--enable-optimizations,,qemu-native"
+PACKAGECONFIG[tk] = ",,tk"
+PACKAGECONFIG[gdbm] = ",,gdbm"
+PACKAGECONFIG[lto] = "--with-lto,,"
+
+do_configure:prepend () {
+ mkdir -p ${B}/Modules
+ cat > ${B}/Modules/Setup.local << EOF
+*disabled*
+${@bb.utils.contains('PACKAGECONFIG', 'gdbm', '', '_gdbm _dbm', d)}
+${@bb.utils.contains('PACKAGECONFIG', 'readline', '', 'readline', d)}
+EOF
+}
+
+CPPFLAGS:append = " -I${STAGING_INCDIR}/ncursesw -I${STAGING_INCDIR}/uuid"
+
+EXTRA_OEMAKE = '\
+ STAGING_LIBDIR=${STAGING_LIBDIR} \
+ STAGING_INCDIR=${STAGING_INCDIR} \
+ LIB=${baselib} \
+'
+
+do_compile:prepend:class-target() {
+ if ${@bb.utils.contains('PACKAGECONFIG', 'pgo', 'true', 'false', d)}; then
+ qemu_binary="${@qemu_wrapper_cmdline(d, '${STAGING_DIR_TARGET}', ['${B}', '${STAGING_DIR_TARGET}/${base_libdir}'])}"
+ cat >pgo-wrapper <<EOF
+#!/bin/sh
+cd ${B}
+$qemu_binary "\$@"
+EOF
+ chmod +x pgo-wrapper
+ fi
+}
+
+do_install:prepend() {
+ ${WORKDIR}/check_build_completeness.py ${T}/log.do_compile
+}
+
+do_install:append:class-target() {
+ oe_multilib_header python${PYTHON_MAJMIN}/pyconfig.h
+}
+
+do_install:append:class-native() {
+ # Make sure we use /usr/bin/env python
+ for PYTHSCRIPT in `grep -rIl ${bindir}/${PN}/python ${D}${bindir}/${PN}`; do
+ sed -i -e '1s|^#!.*|#!/usr/bin/env python3|' $PYTHSCRIPT
+ done
+ # Add a symlink to the native Python so that scripts can just invoke
+ # "nativepython" and get the right one without needing absolute paths
+ # (these often end up too long for the #! parser in the kernel as the
+ # buffer is 128 bytes long).
+ ln -s python3-native/python3 ${D}${bindir}/nativepython3
+
+ # Remove the opt-1.pyc and opt-2.pyc files. There are over 3,000 of them
+ # and the overhead in each recipe-sysroot-native isn't worth it, particularly
+ # when they're only used for python called with -O or -OO.
+ #find ${D} -name *opt-*.pyc -delete
+ # Remove all pyc files. There are a ton of them and it is probably faster to let
+ # python create the ones it wants at runtime rather than manage in the sstate
+ # tarballs and sysroot creation.
+ find ${D} -name *.pyc -delete
+
+ # Nothing should be looking into ${B} for python3-native
+ sed -i -e 's:${B}:/build/path/unavailable/:g' \
+ ${D}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}*/Makefile
+
+ # disable the lookup in user's site-packages globally
+ sed -i 's#ENABLE_USER_SITE = None#ENABLE_USER_SITE = False#' ${D}${libdir}/python${PYTHON_MAJMIN}/site.py
+}
+
+do_install:append() {
+ for c in ${D}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata*.py; do
+ python3 ${WORKDIR}/reformat_sysconfig.py $c
+ done
+ rm -f ${D}${libdir}/python${PYTHON_MAJMIN}/__pycache__/_sysconfigdata*.cpython*
+
+ mkdir -p ${D}${libdir}/python-sysconfigdata
+ sysconfigfile=`find ${D} -name _sysconfig*.py`
+ sed -i \
+ -e "s,^ 'LIBDIR'.*, 'LIBDIR': '${STAGING_LIBDIR}'\,,g" \
+ -e "s,^ 'INCLUDEDIR'.*, 'INCLUDEDIR': '${STAGING_INCDIR}'\,,g" \
+ -e "s,^ 'CONFINCLUDEDIR'.*, 'CONFINCLUDEDIR': '${STAGING_INCDIR}'\,,g" \
+ -e "/^ 'INCLDIRSTOMAKE'/{N; s,/usr/include,${STAGING_INCDIR},g}" \
+ -e "/^ 'INCLUDEPY'/s,/usr/include,${STAGING_INCDIR},g" \
+ -e "s,${B},/build/path/unavailable/,g" \
+ $sysconfigfile
+ cp $sysconfigfile ${D}${libdir}/python-sysconfigdata/_sysconfigdata.py
+
+
+ # Unfortunately the following pyc files are non-deterministc due to 'frozenset'
+ # being written without strict ordering, even with PYTHONHASHSEED = 0
+ # Upstream is discussing ways to solve the issue properly, until then let's
+ # just not install the problematic files.
+ # More info: http://benno.id.au/blog/2013/01/15/python-determinism
+ rm -f ${D}${libdir}/python${PYTHON_MAJMIN}/test/__pycache__/test_range.cpython*
+ rm -f ${D}${libdir}/python${PYTHON_MAJMIN}/test/__pycache__/test_xml_etree.cpython*
+
+ # Similar to the above, we're getting reproducibility issues with
+ # /usr/lib/python3.10/__pycache__/traceback.cpython-310.pyc
+ # so remove it too
+ rm -f ${D}${libdir}/python${PYTHON_MAJMIN}/__pycache__/traceback.cpython*
+
+ # Remove the opt-1.pyc and opt-2.pyc files. They effectively waste space on embedded
+ # style targets as they're only used when python is called with the -O or -OO options
+ # which is rare.
+ find ${D} -name *opt-*.pyc -delete
+}
+
+do_install:append:class-nativesdk () {
+ # Make sure we use /usr/bin/env python
+ for PYTHSCRIPT in `grep -rIl ${bindir}/python ${D}${bindir}`; do
+ sed -i -e '1s|^#!.*|#!/usr/bin/env python3|' $PYTHSCRIPT
+ done
+ create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo' PYTHONNOUSERSITE='1'
+}
+
+SSTATE_SCAN_FILES += "Makefile _sysconfigdata.py"
+SSTATE_HASHEQUIV_FILEMAP = " \
+ populate_sysroot:*/lib*/python3*/_sysconfigdata*.py:${TMPDIR} \
+ populate_sysroot:*/lib*/python3*/_sysconfigdata*.py:${COREBASE} \
+ populate_sysroot:*/lib*/python3*/config-*/Makefile:${TMPDIR} \
+ populate_sysroot:*/lib*/python3*/config-*/Makefile:${COREBASE} \
+ populate_sysroot:*/lib*/python-sysconfigdata/_sysconfigdata.py:${TMPDIR} \
+ populate_sysroot:*/lib*/python-sysconfigdata/_sysconfigdata.py:${COREBASE} \
+ "
+PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
+
+py_package_preprocess () {
+ # Remove references to buildmachine paths in target Makefile and _sysconfigdata
+ sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
+ -e 's|${DEBUG_PREFIX_MAP}||g' \
+ -e 's:${HOSTTOOLS_DIR}/::g' \
+ -e 's:${RECIPE_SYSROOT_NATIVE}::g' \
+ -e 's:${RECIPE_SYSROOT}::g' \
+ -e 's:${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}::g' \
+ ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}*/Makefile \
+ ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata*.py \
+ ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config
+
+ # Reformat _sysconfigdata after modifying it so that it remains
+ # reproducible
+ for c in ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata*.py; do
+ python3 ${WORKDIR}/reformat_sysconfig.py $c
+ done
+
+ # Recompile _sysconfigdata after modifying it
+ cd ${PKGD}
+ sysconfigfile=`find . -name _sysconfigdata_*.py`
+ ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+ -c "from py_compile import compile; compile('$sysconfigfile')"
+ ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+ -c "from py_compile import compile; compile('$sysconfigfile', optimize=1)"
+ ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+ -c "from py_compile import compile; compile('$sysconfigfile', optimize=2)"
+ cd -
+
+ mv ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config-${MULTILIB_SUFFIX}
+
+ #Remove the unneeded copy of target sysconfig data
+ rm -rf ${PKGD}/${libdir}/python-sysconfigdata
+}
+
+# We want bytecode precompiled .py files (.pyc's) by default
+# but the user may set it on their own conf
+INCLUDE_PYCS ?= "1"
+
+python(){
+ import collections, json
+
+ filename = os.path.join(d.getVar('THISDIR'), 'python3', 'python3-manifest.json')
+ # This python changes the datastore based on the contents of a file, so mark
+ # that dependency.
+ bb.parse.mark_dependency(d, filename)
+
+ with open(filename) as manifest_file:
+ manifest_str = manifest_file.read()
+ json_start = manifest_str.find('# EOC') + 6
+ manifest_file.seek(json_start)
+ manifest_str = manifest_file.read()
+ python_manifest = json.loads(manifest_str, object_pairs_hook=collections.OrderedDict)
+
+ # First set RPROVIDES for -native case
+ # Hardcoded since it cant be python3-native-foo, should be python3-foo-native
+ pn = 'python3'
+ rprovides = (d.getVar('RPROVIDES') or "").split()
+
+ # ${PN}-misc-native is not in the manifest
+ rprovides.append(pn + '-misc-native')
+
+ for key in python_manifest:
+ pypackage = pn + '-' + key + '-native'
+ if pypackage not in rprovides:
+ rprovides.append(pypackage)
+
+ d.setVar('RPROVIDES:class-native', ' '.join(rprovides))
+
+ # Then work on the target
+ include_pycs = d.getVar('INCLUDE_PYCS')
+
+ packages = d.getVar('PACKAGES').split()
+ pn = d.getVar('PN')
+
+ newpackages=[]
+ for key in python_manifest:
+ pypackage = pn + '-' + key
+
+ if pypackage not in packages:
+ # We need to prepend, otherwise python-misc gets everything
+ # so we use a new variable
+ newpackages.append(pypackage)
+
+ # "Build" python's manifest FILES, RDEPENDS and SUMMARY
+ d.setVar('FILES:' + pypackage, '')
+ for value in python_manifest[key]['files']:
+ d.appendVar('FILES:' + pypackage, ' ' + value)
+
+ # Add cached files
+ if include_pycs == '1':
+ for value in python_manifest[key]['cached']:
+ d.appendVar('FILES:' + pypackage, ' ' + value)
+
+ for value in python_manifest[key]['rdepends']:
+ # Make it work with or without $PN
+ if '${PN}' in value:
+ value=value.split('-', 1)[1]
+ d.appendVar('RDEPENDS:' + pypackage, ' ' + pn + '-' + value)
+
+ for value in python_manifest[key].get('rrecommends', ()):
+ if '${PN}' in value:
+ value=value.split('-', 1)[1]
+ d.appendVar('RRECOMMENDS:' + pypackage, ' ' + pn + '-' + value)
+
+ d.setVar('SUMMARY:' + pypackage, python_manifest[key]['summary'])
+
+ # Prepending so to avoid python-misc getting everything
+ packages = newpackages + packages
+ d.setVar('PACKAGES', ' '.join(packages))
+ d.setVar('ALLOW_EMPTY:${PN}-modules', '1')
+ d.setVar('ALLOW_EMPTY:${PN}-pkgutil', '1')
+
+ if "pgo" in d.getVar("PACKAGECONFIG").split() and not bb.utils.contains('MACHINE_FEATURES', 'qemu-usermode', True, False, d):
+ bb.fatal("pgo cannot be enabled as there is no qemu-usermode support for this architecture/machine")
+}
+
+# Files needed to create a new manifest
+
+do_create_manifest() {
+ # This task should be run with every new release of Python.
+ # We must ensure that PACKAGECONFIG enables everything when creating
+ # a new manifest, this is to base our new manifest on a complete
+ # native python build, containing all dependencies, otherwise the task
+ # wont be able to find the required files.
+ # e.g. BerkeleyDB is an optional build dependency so it may or may not
+ # be present, we must ensure it is.
+
+ cd ${WORKDIR}
+ # This needs to be executed by python-native and NOT by HOST's python
+ nativepython3 create_manifest3.py ${PYTHON_MAJMIN}
+ cp python3-manifest.json.new ${THISDIR}/python3/python3-manifest.json
+}
+
+# bitbake python -c create_manifest
+# Make sure we have native python ready when we create a new manifest
+addtask do_create_manifest after do_patch do_prepare_recipe_sysroot
+
+# manual dependency additions
+RRECOMMENDS:${PN}-core:append:class-nativesdk = " nativesdk-python3-modules"
+RRECOMMENDS:${PN}-crypt:append:class-target = " ${MLPREFIX}openssl ${MLPREFIX}ca-certificates"
+RRECOMMENDS:${PN}-crypt:append:class-nativesdk = " ${MLPREFIX}openssl ${MLPREFIX}ca-certificates"
+
+# For historical reasons PN is empty and provided by python3-modules
+FILES:${PN} = ""
+RPROVIDES:${PN}-modules = "${PN}"
+
+FILES:${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
+FILES:${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"
+
+# provide python-pyvenv from python3-venv
+RPROVIDES:${PN}-venv += "${MLPREFIX}python3-pyvenv"
+
+# package libpython3
+PACKAGES =+ "libpython3 libpython3-staticdev"
+FILES:libpython3 = "${libdir}/libpython*.so.*"
+FILES:libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}-*/libpython${PYTHON_MAJMIN}.a"
+INSANE_SKIP:${PN}-dev += "dev-elf"
+INSANE_SKIP:${PN}-ptest = "dev-deps"
+
+# catch all the rest (unsorted)
+PACKAGES += "${PN}-misc"
+RDEPENDS:${PN}-misc += "\
+ ${PN}-core \
+ ${PN}-email \
+ ${PN}-codecs \
+ ${PN}-pydoc \
+ ${PN}-pickle \
+ ${PN}-audio \
+ ${PN}-numbers \
+"
+RDEPENDS:${PN}-modules:append:class-target = " ${MLPREFIX}python3-misc"
+RDEPENDS:${PN}-modules:append:class-nativesdk = " ${MLPREFIX}python3-misc"
+FILES:${PN}-misc = "${libdir}/python${PYTHON_MAJMIN} ${libdir}/python${PYTHON_MAJMIN}/lib-dynload"
+
+# catch manpage
+PACKAGES += "${PN}-man"
+FILES:${PN}-man = "${datadir}/man"
+
+# See https://bugs.python.org/issue18748 and https://bugs.python.org/issue37395
+RDEPENDS:libpython3:append:libc-glibc = " libgcc"
+RDEPENDS:${PN}-ctypes:append:libc-glibc = " ${MLPREFIX}ldconfig"
+RDEPENDS:${PN}-ptest = "${PN}-modules ${PN}-tests ${PN}-dev unzip bzip2 libgcc tzdata-europe coreutils sed"
+RDEPENDS:${PN}-ptest:append:libc-glibc = " locale-base-tr-tr.iso-8859-9"
+RDEPENDS:${PN}-tkinter += "${@bb.utils.contains('PACKAGECONFIG', 'tk', '${MLPREFIX}tk ${MLPREFIX}tk-lib', '', d)}"
+RDEPENDS:${PN}-idle += "${@bb.utils.contains('PACKAGECONFIG', 'tk', '${PN}-tkinter ${MLPREFIX}tcl', '', d)}"
+DEV_PKG_DEPENDENCY = ""
+RDEPENDS:${PN}-pydoc += "${PN}-io"
+
+RDEPENDS:${PN}-tests:append:class-target = " ${MLPREFIX}bash"
+RDEPENDS:${PN}-tests:append:class-nativesdk = " ${MLPREFIX}bash"
+
+# Python's tests contain large numbers of files we don't need in the recipe sysroots
+SYSROOT_PREPROCESS_FUNCS += " py3_sysroot_cleanup"
+py3_sysroot_cleanup () {
+ rm -rf ${SYSROOT_DESTDIR}${libdir}/python${PYTHON_MAJMIN}/test
+}