Add meta-xilinx subtree
Import git://git.yoctoproject.org/meta-xilinx from 5fccc46503 as
meta-xilinx subtree.
Change-Id: I3d59bcf3a57cee588aab7f5cdd0287af66450c8a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-7/0002-microblaze.md-Improve-adddi3-and-subdi3-insn-definit.patch b/meta-xilinx/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-7/0002-microblaze.md-Improve-adddi3-and-subdi3-insn-definit.patch
new file mode 100644
index 0000000..03ea8b1
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-7/0002-microblaze.md-Improve-adddi3-and-subdi3-insn-definit.patch
@@ -0,0 +1,66 @@
+From 2d90c10cf4d95999f68f474305828c7dfc51af18 Mon Sep 17 00:00:00 2001
+From: Nathan Rossi <nathan@nathanrossi.com>
+Date: Thu, 12 Nov 2015 16:09:31 +1000
+Subject: [PATCH] microblaze.md: Improve 'adddi3' and 'subdi3' insn definitions
+
+Change adddi3 to handle DI immediates as the second operand, this
+requires modification to the output template however reduces the need to
+specify seperate templates for 16-bit positive/negative immediate
+operands. The use of 32-bit immediates for the addi and addic
+instructions is handled by the assembler, which will emit the imm
+instructions when required. This conveniently handles the optimizable
+cases where the immediate constant value does not need the higher half
+words of the operands upper/lower words.
+
+Change the constraints of the subdi3 instruction definition such that it
+does not match the second operand as an immediate value. This is because
+there is no definition to handle this case nor is it possible to
+implement purely with instructions as microblaze does not provide an
+instruction to perform a forward arithmetic subtraction (it only
+provides reverse 'rD = IMM - rA').
+
+Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
+Upstream-Status: Unsubmitted
+---
+ gcc/config/microblaze/microblaze.md | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
+
+diff --git a/gcc/config/microblaze/microblaze.md b/gcc/config/microblaze/microblaze.md
+index b3a0011fd7..8a372d7ebb 100644
+--- a/gcc/config/microblaze/microblaze.md
++++ b/gcc/config/microblaze/microblaze.md
+@@ -483,17 +483,16 @@
+ ;; Adding 2 DI operands in register or reg/imm
+
+ (define_insn "adddi3"
+- [(set (match_operand:DI 0 "register_operand" "=d,d,d")
+- (plus:DI (match_operand:DI 1 "register_operand" "%d,d,d")
+- (match_operand:DI 2 "arith_operand32" "d,P,N")))]
++ [(set (match_operand:DI 0 "register_operand" "=d,d")
++ (plus:DI (match_operand:DI 1 "register_operand" "%d,d")
++ (match_operand:DI 2 "arith_operand" "d,i")))]
+ ""
+ "@
+ add\t%L0,%L1,%L2\;addc\t%M0,%M1,%M2
+- addi\t%L0,%L1,%2\;addc\t%M0,%M1,r0
+- addi\t%L0,%L1,%2\;addc\t%M0,%M1,r0\;addi\t%M0,%M0,-1"
++ addi\t%L0,%L1,%j2\;addic\t%M0,%M1,%h2"
+ [(set_attr "type" "darith")
+ (set_attr "mode" "DI")
+- (set_attr "length" "8,8,12")])
++ (set_attr "length" "8,8")])
+
+ ;;----------------------------------------------------------------
+ ;; Subtraction
+@@ -530,7 +529,7 @@
+ (define_insn "subdi3"
+ [(set (match_operand:DI 0 "register_operand" "=&d")
+ (minus:DI (match_operand:DI 1 "register_operand" "d")
+- (match_operand:DI 2 "arith_operand32" "d")))]
++ (match_operand:DI 2 "register_operand" "d")))]
+ ""
+ "rsub\t%L0,%L2,%L1\;rsubc\t%M0,%M2,%M1"
+ [(set_attr "type" "darith")
+--
+2.14.2
+