diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch
new file mode 100644
index 0000000..4b9d72b
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch
@@ -0,0 +1,217 @@
+From dfe572bcea9b74086d5bd9b963af26e64a043336 Mon Sep 17 00:00:00 2001
+From: Clement Laigle <clement.laigle8@gmail.com>
+Date: Sun, 10 Jun 2018 23:21:28 +0200
+Subject: [PATCH] zynq: Add initial support for Avnet MiniZed
+
+Initial support for Avnet MiniZed board.
+
+Signed-off-by: Clement Laigle <clement.laigle8@gmail.com>
+---
+ arch/arm/dts/Makefile          |   1 +
+ arch/arm/dts/zynq-minized.dts  | 106 +++++++++++++++++++++++++++++++++++++++++
+ configs/zynq_minized_defconfig |  68 ++++++++++++++++++++++++++
+ 3 files changed, 175 insertions(+)
+ create mode 100644 arch/arm/dts/zynq-minized.dts
+ create mode 100644 configs/zynq_minized_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index a895c70..32f9ae1 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
+ 	zynq-cse-qspi-single.dtb \
+ 	zynq-microzed.dtb \
+ 	zynq-picozed.dtb \
++	zynq-minized.dtb \
+ 	zynq-syzygy-hub.dtb \
+ 	zynq-topic-miami.dtb \
+ 	zynq-topic-miamilite.dtb \
+diff --git a/arch/arm/dts/zynq-minized.dts b/arch/arm/dts/zynq-minized.dts
+new file mode 100644
+index 0000000..3a05518
+--- /dev/null
++++ b/arch/arm/dts/zynq-minized.dts
+@@ -0,0 +1,106 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * dts file for Avnet MiniZed board
++ *
++ * (C) Copyright 2017 - 2018, Xilinx, Inc.
++ *
++ * Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
++ */
++
++/dts-v1/;
++#include "zynq-7000.dtsi"
++
++/ {
++       model = "Avnet Zynq MiniZed Development Board";
++       compatible = "avnet,minized", "xlnx,zynq-7000";
++
++       aliases {
++               serial0 = &uart1;
++               serial1 = &uart0;
++               spi0 = &qspi;
++               mmc0 = &sdhci0;
++       };
++
++       memory@0 {
++               device_type = "memory";
++               reg = <0x0 0x20000000>;
++       };
++
++       chosen {
++               bootargs = "";
++               stdout-path = "serial0:115200n8";
++       };
++
++       usb_phy0: phy0 {
++               compatible = "usb-nop-xceiv";
++               #phy-cells = <0>;
++       };
++};
++
++&qspi {
++       status = "okay";
++       is-dual = <0>;
++       num-cs = <1>;
++       flash@0 {
++               compatible = "micron,m25p128";
++               reg = <0x0>;
++               spi-tx-bus-width = <4>;
++               spi-rx-bus-width = <4>;
++               spi-max-frequency = <50000000>;
++               partitions {
++                       compatible = "fixed-partitions";
++                       #address-cells = <1>;
++                       #size-cells = <1>;
++                       partition@0 {
++                               label = "boot";
++                               reg = <0x0 0xff0000>;
++                       };
++
++                       partition@270000 {
++                               label = "kernel";
++                               reg = <0x270000 0xd80000>;
++                       };
++
++                       partition@ff0000 {
++                               label = "bootenv";
++                               reg = <0xff0000 0x10000>;
++                       };
++
++                       partition@1000000 {
++                               label = "spare";
++                               reg = <0x1000000 0x0>;
++                       };
++               };
++       };
++};
++
++&uart0 {
++       status = "okay";
++};
++
++&uart1 {
++       u-boot,dm-pre-reloc;
++       status = "okay";
++};
++
++&usb0 {
++       status = "okay";
++       dr_mode = "host";
++       usb-phy = <&usb_phy0>;
++       usb-reset = <&gpio0 7 0>; /* USB_RST_N-MIO7 */
++};
++
++&sdhci1 {
++       status = "okay";
++       non-removable;
++       bus-width = <4>;
++       max-frequency = <12000000>;
++
++       #address-cells = <1>;
++       #size-cells = <0>;
++       mmccard: mmccard@0 {
++               compatible = "mmc-card";
++               reg = <0>;
++               broken-hpi;
++       };
++};
+diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig
+new file mode 100644
+index 0000000..44d65fc
+--- /dev/null
++++ b/configs/zynq_minized_defconfig
+@@ -0,0 +1,68 @@
++CONFIG_ARM=y
++CONFIG_ARCH_ZYNQ=y
++CONFIG_SYS_TEXT_BASE=0x4000000
++CONFIG_SPL=y
++CONFIG_SPL_STACK_R_ADDR=0x200000
++CONFIG_DEFAULT_DEVICE_TREE="zynq-minized"
++CONFIG_DEBUG_UART=y
++CONFIG_DISTRO_DEFAULTS=y
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_FIT=y
++CONFIG_FIT_SIGNATURE=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_OS_BOOT=y
++CONFIG_SYS_PROMPT="Zynq> "
++CONFIG_CMD_THOR_DOWNLOAD=y
++CONFIG_CMD_DFU=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_FPGA_LOADBP=y
++CONFIG_CMD_FPGA_LOADFS=y
++CONFIG_CMD_FPGA_LOADMK=y
++CONFIG_CMD_FPGA_LOADP=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_SF=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_TFTPPUT=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_EXT4_WRITE=y
++CONFIG_ENV_IS_IN_SPI_FLASH=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_DFU_MMC=y
++CONFIG_DFU_RAM=y
++CONFIG_FPGA_XILINX=y
++CONFIG_FPGA_ZYNQPL=y
++CONFIG_DM_GPIO=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_ZYNQ=y
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_BAR=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_PHY_MARVELL=y
++CONFIG_PHY_REALTEK=y
++CONFIG_PHY_XILINX=y
++CONFIG_ZYNQ_GEM=y
++CONFIG_DEBUG_UART_ZYNQ=y
++CONFIG_DEBUG_UART_BASE=0xe0001000
++CONFIG_DEBUG_UART_CLOCK=50000000
++CONFIG_ZYNQ_SERIAL=y
++CONFIG_ZYNQ_QSPI=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_ULPI_VIEWPORT=y
++CONFIG_USB_ULPI=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
++CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
++CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
++CONFIG_CI_UDC=y
++CONFIG_USB_GADGET_DOWNLOAD=y
++CONFIG_USB_FUNCTION_THOR=y
++CONFIG_OF_EMBED=y
+-- 
+2.7.4
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend
new file mode 100644
index 0000000..2fdbdb4
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend
@@ -0,0 +1,8 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI_append = " file://minized-u-boot.patch"
+
+HAS_PLATFORM_INIT_append = " \
+		zynq_minized_config \
+		"
+