Yocto 2.5
Move OpenBMC to Yocto 2.5(sumo)
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I5c5ad6904a16e14c1c397f0baf10c9d465594a78
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
index a115037..466f443 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
@@ -3,11 +3,13 @@
LIC_FILES_CHKSUM = "file://LICENCE.broadcom;md5=4a4d169737c0786fb9482bb6d30401d1"
-inherit deploy
+inherit deploy nopackages
include recipes-bsp/common/firmware.inc
-RDEPENDS_${PN} = "rpi-config"
+INHIBIT_DEFAULT_DEPS = "1"
+
+DEPENDS = "rpi-config"
COMPATIBLE_MACHINE = "^rpi$"
@@ -32,7 +34,7 @@
touch ${DEPLOYDIR}/${PN}/${PN}-${PV}.stamp
}
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
do_deploy[dirs] += "${DEPLOYDIR}/${PN}"
PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
index ca4160b..e0b2b58 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
@@ -15,15 +15,18 @@
PR = "r5"
+INHIBIT_DEFAULT_DEPS = "1"
+
PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
-VC4DTBO_raspberrypi3-64 = "vc4-fkms-v3d"
+VC4DTBO_raspberrypi3-64 ?= "vc4-fkms-v3d"
VC4DTBO ?= "vc4-kms-v3d"
-inherit deploy
+
+inherit deploy nopackages
do_deploy() {
install -d ${DEPLOYDIR}/bcm2835-bootfiles
@@ -31,25 +34,33 @@
cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/
if [ -n "${KEY_DECODE_MPG2}" ]; then
- sed -i '/#decode_MPG2/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${KEY_DECODE_WVC1}" ]; then
- sed -i '/#decode_WVC1/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${DISABLE_OVERSCAN}" ]; then
- sed -i '/#disable_overscan/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
+ if [ -n "${DISABLE_SPLASH}" ]; then
+ sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+
+ # Set overclocking options
if [ -n "${ARM_FREQ}" ]; then
- sed -i '/#arm_freq/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${GPU_FREQ}" ]; then
+ sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${CORE_FREQ}" ]; then
- sed -i '/#core_freq/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${SDRAM_FREQ}" ]; then
- sed -i '/#sdram_freq/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${OVER_VOLTAGE}" ]; then
- sed -i '/#over_voltage/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
# GPU memory
@@ -57,13 +68,47 @@
sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${GPU_MEM_256}" ]; then
- sed -i '/#gpu_mem_256/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${GPU_MEM_512}" ]; then
- sed -i '/#gpu_mem_512/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
if [ -n "${GPU_MEM_1024}" ]; then
- sed -i '/#gpu_mem_1024/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+
+ # Set boot delay
+ if [ -n "${BOOT_DELAY}" ]; then
+ sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${BOOT_DELAY_MS}" ]; then
+ sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+
+ # Set HDMI and composite video options
+ if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then
+ sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${HDMI_DRIVE}" ]; then
+ sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${HDMI_GROUP}" ]; then
+ sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${HDMI_MODE}" ]; then
+ sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${CONFIG_HDMI_BOOST}" ]; then
+ sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${SDTV_MODE}" ]; then
+ sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${SDTV_ASPECT}" ]; then
+ sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+ if [ -n "${DISPLAY_ROTATE}" ]; then
+ sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
# Video camera support
@@ -84,6 +129,7 @@
echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
+ # I2C support
if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then
echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -95,12 +141,10 @@
echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
-
if [ "${PITFT28r}" = "1" ]; then
echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
-
if [ "${PITFT35r}" = "1" ]; then
echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -127,6 +171,15 @@
echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
fi
+
+ # DWC2 USB peripheral support
+ if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then
+ echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+ fi
+
+ # Append extra config if the user has provided any
+ echo "${RPI_EXTRA_CONFIG}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
}
do_deploy_append_raspberrypi3-64() {
@@ -135,13 +188,9 @@
echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-
- # Device Tree support
- echo "# Load correct Device Tree for Aarch64" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
- echo "device_tree=bcm2710-rpi-3-b.dtb" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
}
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
PACKAGE_ARCH = "${MACHINE_ARCH}"