diff --git a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-advanced.xml b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-advanced.xml
index c3013b8..5c76ed2 100644
--- a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-advanced.xml
+++ b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-advanced.xml
@@ -21,7 +21,7 @@
     <para>
         Kernel Metadata exists in many places.
         One area in the Yocto Project
-        <ulink url='&YOCTO_DOCS_REF_URL;#source-repositories'>Source Repositories</ulink>
+        <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
         is the <filename>yocto-kernel-cache</filename> Git repository.
         You can find this repository grouped under the "Yocto Linux Kernel"
         heading in the
@@ -64,8 +64,7 @@
         <ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>
         variable.
         This variable is typically set to the same value as the
-        <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
-        variable, which is used by
+        <filename>MACHINE</filename> variable, which is used by
         <ulink url='&YOCTO_DOCS_REF_URL;#bitbake-term'>BitBake</ulink>.
         However, in some cases, the variable might instead refer to the
         underlying platform of the <filename>MACHINE</filename>.
@@ -77,8 +76,7 @@
         Multiple Corei7-based BSPs could share the same "intel-corei7-64"
         value for <filename>KMACHINE</filename>.
         It is important to realize that <filename>KMACHINE</filename> is
-        just for kernel mapping, while
-        <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
+        just for kernel mapping, while <filename>MACHINE</filename>
         is the machine type within a BSP Layer.
         Even with this distinction, however, these two variables can hold
         the same value.
@@ -116,8 +114,7 @@
         used in assembling the configuration.
         If you do not specify a <filename>LINUX_KERNEL_TYPE</filename>,
         it defaults to "standard".
-        Together with
-        <ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>,
+        Together with <filename>KMACHINE</filename>,
         <filename>LINUX_KERNEL_TYPE</filename> defines the search
         arguments used by the kernel tools to find the
         appropriate description within the kernel Metadata with which to
@@ -631,8 +628,10 @@
             <note>
                 For BSPs supported by the Yocto Project, the BSP description
                 files are located in the <filename>bsp</filename> directory
-                of the <filename>yocto-kernel-cache</filename> repository
-                organized under the "Yocto Linux Kernel" heading in the
+                of the
+                <ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi/yocto-kernel-cache/tree/bsp'><filename>yocto-kernel-cache</filename></ulink>
+                repository organized under the "Yocto Linux Kernel" heading
+                in the
                 <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi'>Yocto Project Source Repositories</ulink>.
             </note>
         </para>
@@ -641,27 +640,30 @@
             This section overviews the BSP description structure, the
             aggregation concepts, and presents a detailed example using
             a BSP supported by the Yocto Project (i.e. BeagleBone Board).
+            For complete information on BSP layer file hierarchy, see the
+            <ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>.
         </para>
 
         <section id='bsp-description-file-overview'>
             <title>Overview</title>
 
             <para>
-                For simplicity, consider the following top-level BSP
+                For simplicity, consider the following root BSP layer
                 description files for the BeagleBone board.
-                Top-level BSP descriptions files employ both a structure
-                and naming convention for consistency.
+                These files employ both a structure and naming convention
+                for consistency.
                 The naming convention for the file is as follows:
                 <literallayout class='monospaced'>
-     <replaceable>bsp_name</replaceable>-<replaceable>kernel_type</replaceable>.scc
+     <replaceable>bsp_root_name</replaceable>-<replaceable>kernel_type</replaceable>.scc
                 </literallayout>
-                Here are some example top-level BSP filenames for the
+                Here are some example root layer BSP filenames for the
                 BeagleBone Board BSP, which is supported by the Yocto Project:
                 <literallayout class='monospaced'>
      beaglebone-standard.scc
      beaglebone-preempt-rt.scc
                 </literallayout>
-                Each file uses the BSP name followed by the kernel type.
+                Each file uses the root name (i.e "beaglebone") BSP name
+                followed by the kernel type.
             </para>
 
             <para>
@@ -850,7 +852,7 @@
 
             <para>
                 Now consider the "minnow" description for the "tiny" kernel
-                type (i.e. <filename>minnow-tiny.scc</filename>:
+                type (i.e. <filename>minnow-tiny.scc</filename>):
                 <literallayout class='monospaced'>
         define KMACHINE minnow
         define KTYPE tiny
@@ -1012,8 +1014,7 @@
 
         <para>
             If you modify the Metadata, you must not forget to update the
-            <ulink url='&YOCTO_DOCS_REF_URL;#var-SRCREV'><filename>SRCREV</filename></ulink>
-            statements in the kernel's recipe.
+            <filename>SRCREV</filename> statements in the kernel's recipe.
             In particular, you need to update the
             <filename>SRCREV_meta</filename> variable to match the commit in
             the <filename>KMETA</filename> branch you wish to use.
@@ -1221,9 +1222,13 @@
                 </para></listitem>
             <listitem><para>
                 <filename>define</filename>:
-                Defines variables, such as <filename>KMACHINE</filename>,
-                <filename>KTYPE</filename>, <filename>KARCH</filename>,
-                and <filename>KFEATURE_DESCRIPTION</filename>.</para></listitem>
+                Defines variables, such as
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-KMACHINE'><filename>KMACHINE</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-KTYPE'><filename>KTYPE</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-KARCH'><filename>KARCH</filename></ulink>,
+                and
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-KFEATURE_DESCRIPTION'><filename>KFEATURE_DESCRIPTION</filename></ulink>.
+                </para></listitem>
             <listitem><para>
                 <filename>include SCC_FILE</filename>:
                 Includes an SCC file in the current file.
diff --git a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-common.xml b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-common.xml
index b8fd870..299bac4 100644
--- a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-common.xml
+++ b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-common.xml
@@ -25,7 +25,7 @@
             Before you can do any kernel development, you need to be
             sure your build host is set up to use the Yocto Project.
             For information on how to get set up, see the
-            "<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-the-development-host-to-use-the-yocto-project'>Setting Up to Use the Yocto Project</ulink>"
+            "<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-the-development-host-to-use-the-yocto-project'>Preparing the Build Host</ulink>"
             section in the Yocto Project Development Tasks Manual.
             Part of preparing the system is creating a local Git
             repository of the
@@ -79,7 +79,7 @@
                         </literallayout>
                         <note>
                             The previous commands assume the
-                            <ulink url='&YOCTO_DOCS_REF_URL;#source-repositories'>Source Repositories</ulink>
+                            <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
                             (i.e. <filename>poky</filename>) have been cloned
                             using Git and the local repository is named
                             "poky".
@@ -136,7 +136,7 @@
                             Developer's Guide, respectively.
                             For information on how to use the
                             <filename>bitbake-layers create-layer</filename>
-                            command, see the
+                            command to quickly set up a layer, see the
                             "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script'>Creating a General Layer Using the <filename>bitbake-layers</filename> Script</ulink>"
                             section in the Yocto Project Development Tasks
                             Manual.
@@ -303,7 +303,7 @@
                         </literallayout>
                         <note>
                             The previous commands assume the
-                            <ulink url='&YOCTO_DOCS_REF_URL;#source-repositories'>Source Repositories</ulink>
+                            <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
                             (i.e. <filename>poky</filename>) have been cloned
                             using Git and the local repository is named
                             "poky".
@@ -360,7 +360,7 @@
                             Developer's Guide, respectively.
                             For information on how to use the
                             <filename>bitbake-layers create-layer</filename>
-                            command, see the
+                            command to quickly set up a layer, see the
                             "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script'>Creating a General Layer Using the <filename>bitbake-layers</filename> Script</ulink>"
                             section in the Yocto Project Development Tasks
                             Manual.
@@ -387,7 +387,7 @@
                         You can find Git repositories of supported Yocto Project
                         kernels organized under "Yocto Linux Kernel" in the
                         Yocto Project Source Repositories at
-                        <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.
+                        <ulink url='&YOCTO_GIT_URL;'></ulink>.
                         </para>
 
                         <para>
@@ -489,7 +489,8 @@
                 See the
                 "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script'>Creating a General Layer Using the <filename>bitbake-layers</filename> Script</ulink>"
                 section in the Yocto Project Development Tasks Manual for
-                information on how to use this script.
+                information on how to use this script to quick set up a
+                new layer.
             </note>
         </para>
 
@@ -1224,18 +1225,6 @@
             the
             "<link linkend='getting-ready-for-traditional-kernel-development'>Getting Ready for Traditional Kernel Development</link>"
             Section.
-        </para>
-
-        <para>
-            Although this example uses Git and shell commands to generate the
-            patch, you could use the <filename>yocto-kernel</filename> script
-            found in the <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
-            under <filename>scripts</filename> to add and manage kernel
-            patches and configuration.
-            See the "<ulink url='&YOCTO_DOCS_BSP_URL;#managing-kernel-patches-and-config-items-with-yocto-kernel'>Managing kernel Patches and Config Items with yocto-kernel</ulink>"
-            section in the Yocto Project Board Support Packages (BSP)
-            Developer's Guide for more information on the
-            <filename>yocto-kernel</filename> script.
             <orderedlist>
                 <listitem><para>
                     <emphasis>Edit the Source Files</emphasis>
@@ -1413,9 +1402,9 @@
      SRC_URI_append = " file://0001-calibrate.c-Added-some-printk-statements.patch"
                     </literallayout>
                     The
-                    <ulink url='&YOCTO_DOCS_REF_URL;var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>
+                    <ulink url='&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>
                     and
-                    <ulink url='&YOCTO_DOCS_REF_URL;var-SRC_URI'><filename>SRC_URI</filename></ulink>
+                    <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>
                     statements enable the OpenEmbedded build system to find
                     the patch file.</para>
 
@@ -1667,7 +1656,7 @@
                     after applying the existing defconfig file configurations.
                 </note>
                 For more information on configuring the kernel, see the
-                "<link link='changing-the-configuration'>Changing the Configuration</link>"
+                "<link linkend='changing-the-configuration'>Changing the Configuration</link>"
                 section.
             </para>
         </section>
@@ -2429,7 +2418,7 @@
                 modules.
                 If your module <filename>Makefile</filename> uses a different
                 variable, you might want to override the
-                <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-compile'><filename>do_compile()</filename></ulink>
+                <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-compile'><filename>do_compile</filename></ulink>
                 step, or create a patch to
                 the <filename>Makefile</filename> to work with the more typical
                 <filename>KERNEL_SRC</filename> or
@@ -2505,7 +2494,7 @@
                     the Git commands.
                     You can see the branch names through the web interface
                     to the Yocto Project source repositories at
-                    <ulink url='http://git.yoctoproject.org/cgit.cgi'></ulink>.
+                    <ulink url='&YOCTO_GIT_URL;'></ulink>.
                 </note>
                 To see a full range of the changes, use the
                 <filename>git whatchanged</filename> command and specify a
diff --git a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-concepts-appx.xml b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-concepts-appx.xml
index fbecc13..6d675a6 100644
--- a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-concepts-appx.xml
+++ b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-concepts-appx.xml
@@ -49,7 +49,7 @@
 
         <para>
             You can find a web interface to the Yocto Linux kernels in the
-            <ulink url='&YOCTO_DOCS_REF_URL;#source-repositories'>Source Repositories</ulink>
+            <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
             at
             <ulink url='&YOCTO_GIT_URL;'></ulink>.
             If you look at the interface, you will see to the left a
@@ -239,8 +239,9 @@
                         <ulink url='http://git-scm.com/documentation'></ulink>.
                         You can also get an introduction to Git as it
                         applies to the Yocto Project in the
-                        "<ulink url='&YOCTO_DOCS_REF_URL;#git'>Git</ulink>"
-                        section in the Yocto Project Reference Manual.
+                        "<ulink url='&YOCTO_DOCS_OM_URL;#git'>Git</ulink>"
+                        section in the Yocto Project Overview and Concepts
+                        Manual.
                         The latter reference provides an overview of
                         Git and presents a minimal set of Git commands
                         that allows you to be functional using Git.
@@ -381,7 +382,7 @@
                 generic kernel just for conceptual purposes.
                 Also keep in mind that this structure represents the Yocto
                 Project
-                <ulink url='&YOCTO_DOCS_REF_URL;#source-repositories'>Source Repositories</ulink>
+                <ulink url='&YOCTO_DOCS_OM_URL;#source-repositories'>Source Repositories</ulink>
                 that are either pulled from during the build or established
                 on the host development system prior to the build by either
                 cloning a particular kernel's Git repository or by
diff --git a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-intro.xml b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-intro.xml
index dba4549..4e4fd28 100644
--- a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-intro.xml
+++ b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-intro.xml
@@ -108,7 +108,11 @@
         review and understand the following documentation:
         <itemizedlist>
             <listitem><para>
-                <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink>
+                <ulink url='&YOCTO_DOCS_BRIEF_URL;'>Yocto Project Quick Build</ulink>
+                document.
+                </para></listitem>
+            <listitem><para>
+                <ulink url='&YOCTO_DOCS_OM_URL;'>Yocto Project Overview and Concepts Manual</ulink>.
                 </para></listitem>
             <listitem><para>
                 <ulink url='&YOCTO_DOCS_SDK_URL;#using-devtool-in-your-sdk-workflow'><filename>devtool</filename> workflow</ulink>
@@ -127,18 +131,6 @@
                 </para></listitem>
         </itemizedlist>
     </para>
-
-    <para>
-        Finally, while this document focuses on the manual creation of
-        recipes, patches, and configuration files, the Yocto Project
-        Board Support Package (BSP) tools are available to automate
-        this process with existing content and work well to create the
-        initial framework and boilerplate code.
-        For details on these tools, see the
-        "<ulink url='&YOCTO_DOCS_BSP_URL;#using-the-yocto-projects-bsp-tools'>Using the Yocto Project's BSP Tools</ulink>"
-        section in the Yocto Project Board Support Package (BSP) Developer's
-        Guide.
-    </para>
 </section>
 
 <section id='kernel-modification-workflow'>
@@ -165,12 +157,15 @@
     <para>
         <orderedlist>
             <listitem><para>
-                <emphasis>Set Up Your Host Development System to Support
-                Development Using the Yocto Project:</emphasis>
+
+
+                <emphasis>Set up Your Host Development System to Support
+                Development Using the Yocto Project</emphasis>:
                 See the
-                "<ulink url='&YOCTO_DOCS_QS_URL;#yp-resources'>Setting Up to Use the Yocto Project</ulink>"
-                section in the Yocto Project Quick Start for options on how
-                to get a build host ready to use the Yocto Project.
+                "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-start'>Setting Up the Development Host to Use the Yocto Project</ulink>"
+                section in the Yocto Project Development Tasks Manual for
+                options on how to get a build host ready to use the Yocto
+                Project.
                 </para></listitem>
             <listitem><para>
                 <emphasis>Set Up Your Host Development System for Kernel Development:</emphasis>
@@ -243,11 +238,7 @@
 
                 <para>Additionally, if you are working in a BSP layer
                 and need to modify the BSP's kernel's configuration,
-                you can use the
-                <ulink url='&YOCTO_DOCS_BSP_URL;#managing-kernel-patches-and-config-items-with-yocto-kernel'><filename>yocto-kernel</filename></ulink>
-                script as well as <filename>menuconfig</filename>.
-                The <filename>yocto-kernel</filename> script lets
-                you interactively set up kernel configurations.
+                you can use <filename>menuconfig</filename>.
                 </para></listitem>
             <listitem><para>
                 <emphasis>Rebuild the Kernel Image With Your Changes:</emphasis>
diff --git a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-maint-appx.xml b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-maint-appx.xml
index f5fd183..b825ae7 100644
--- a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-maint-appx.xml
+++ b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev-maint-appx.xml
@@ -14,7 +14,7 @@
             create Yocto Linux kernel repositories.
             These kernel repositories are found under the heading "Yocto Linux
             Kernel" at
-            <ulink url='&YOCTO_GIT_URL;/cgit.cgi'>&YOCTO_GIT_URL;/cgit.cgi</ulink>
+            <ulink url='&YOCTO_GIT_URL;'>&YOCTO_GIT_URL;</ulink>
             and are shipped as part of a Yocto Project release.
             The team creates these repositories by compiling and executing the
             set of feature descriptions for every BSP and feature in the
@@ -118,13 +118,13 @@
             The following steps describe what happens when the Yocto Project
             Team constructs the Yocto Project kernel source Git repository
             (or tree) found at
-            <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink> given the
+            <ulink url='&YOCTO_GIT_URL;'></ulink> given the
             introduction of a new top-level kernel feature or BSP.
-            These are the actions that effectively provide the Metadata
-            and create the tree that includes the new feature, patch or BSP:
+            The following actions effectively provide the Metadata
+            and create the tree that includes the new feature, patch, or BSP:
             <orderedlist>
                 <listitem><para>
-                    <emphasis>Pass Feature to Build Subsystem:</emphasis>
+                    <emphasis>Pass Feature to the OpenEmbedded Build System:</emphasis>
                     A top-level kernel feature is passed to the kernel build
                     subsystem.
                     Normally, this feature is a BSP for a particular kernel
@@ -138,8 +138,10 @@
                         <listitem><para>
                             The in-tree kernel-cache directories, which are
                             located in the
-                            <filename>yocto-kernel-cache</filename>
-                            repository
+                            <ulink url='&YOCTO_GIT_URL;/cgit/cgit.cgi/yocto-kernel-cache/tree/bsp'><filename>yocto-kernel-cache</filename></ulink>
+                            repository organized under the "Yocto Linux Kernel"
+                            heading in the
+                            <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi'>Yocto Project Source Repositories</ulink>.
                             </para></listitem>
                         <listitem><para>
                             Areas pointed to by <filename>SRC_URI</filename>
@@ -148,9 +150,11 @@
                     </itemizedlist>
                     For a typical build, the target of the search is a
                     feature description in an <filename>.scc</filename> file
-                    whose name follows this format:
+                    whose name follows this format (e.g.
+                    <filename>beaglebone-standard.scc</filename> and
+                    <filename>beaglebone-preempt-rt.scc</filename>):
                     <literallayout class='monospaced'>
-     <replaceable>bsp_name</replaceable>-<replaceable>kernel_type</replaceable>.scc
+     <replaceable>bsp_root_name</replaceable>-<replaceable>kernel_type</replaceable>.scc
                     </literallayout>
                 </para></listitem>
                 <listitem><para>
@@ -213,7 +217,7 @@
                         end of an existing branch.
                         The full repository generation that is found in the
                         official Yocto Project kernel repositories at
-                        <ulink url='&YOCTO_GIT_URL;/cgit.cgi'>http://git.yoctoproject.org/cgit.cgi</ulink>
+                        <ulink url='&YOCTO_GIT_URL;'>http://git.yoctoproject.org</ulink>
                         is the combination of all supported boards and
                         configurations.
                         </para></listitem>
@@ -227,7 +231,7 @@
                         </para></listitem>
                     <listitem><para>
                         The full kernel tree that you see on
-                        <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink> is
+                        <ulink url='&YOCTO_GIT_URL;'></ulink> is
                         generated through repeating the above steps for all
                         valid BSPs.
                         The end result is a branched, clean history tree that
diff --git a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev.xml b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev.xml
index ec36d24..986c440 100644
--- a/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev.xml
+++ b/import-layers/yocto-poky/documentation/kernel-dev/kernel-dev.xml
@@ -87,14 +87,9 @@
                 <revremark>Released with the Yocto Project 2.4 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.4.1</revnumber>
-                <date>January 2018</date>
-                <revremark>Released with the Yocto Project 2.4.1 Release.</revremark>
-            </revision>
-            <revision>
-                <revnumber>2.4.2</revnumber>
-                <date>March 2018</date>
-                <revremark>Released with the Yocto Project 2.4.2 Release.</revremark>
+                <revnumber>2.5</revnumber>
+                <date>May 2018</date>
+                <revremark>Released with the Yocto Project 2.5 Release.</revremark>
             </revision>
         </revhistory>
 
@@ -116,24 +111,36 @@
                        is for the &YOCTO_DOC_VERSION; release of the
                        Yocto Project.
                        To be sure you have the latest version of the manual
-                       for this release, use the manual from the
-                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>.
-                       </para></listitem>
-                   <listitem><para>
-                       For manuals associated with other releases of the Yocto
-                       Project, go to the
+                       for this release, go to the
                        <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
-                       and use the drop-down "Active Releases" button
-                       and choose the manual associated with the desired
-                       Yocto Project.
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
                        </para></listitem>
                    <listitem><para>
-                        To report any inaccuracies or problems with this
-                        manual, send an email to the Yocto Project
-                        discussion group at
-                        <filename>yocto@yoctoproject.com</filename> or log into
-                        the freenode <filename>#yocto</filename> channel.
-                        </para></listitem>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
                </itemizedlist>
            </note>
     </legalnotice>