| # NVRAM file for BCM943430WLSELG |
| # 2.4 GHz, 20 MHz BW mode |
| |
| # The following parameter values are just placeholders, need to be updated. |
| manfid=0x2d0 |
| prodid=0x0726 |
| vendid=0x14e4 |
| devid=0x43e2 |
| boardtype=0x0726 |
| boardrev=0x1202 |
| boardnum=22 |
| macaddr=00:90:4c:c5:12:38 |
| sromrev=11 |
| boardflags=0x00404201 |
| boardflags3=0x08000000 |
| xtalfreq=37400 |
| #xtalfreq=19200 |
| nocrc=1 |
| ag0=255 |
| aa2g=1 |
| ccode=ALL |
| |
| pa0itssit=0x20 |
| extpagain2g=0 |
| |
| #PA parameters for 2.4GHz, measured at CHIP OUTPUT |
| pa2ga0=-168,7161,-820 |
| AvVmid_c0=0x0,0xc8 |
| cckpwroffset0=5 |
| |
| # PPR params |
| maxp2ga0=84 |
| txpwrbckof=6 |
| cckbw202gpo=0 |
| legofdmbw202gpo=0x66111111 |
| mcsbw202gpo=0x77711111 |
| propbw202gpo=0xdd |
| |
| # OFDM IIR : |
| ofdmdigfilttype=18 |
| ofdmdigfilttypebe=18 |
| # PAPD mode: |
| papdmode=1 |
| papdvalidtest=1 |
| pacalidx2g=32 |
| papdepsoffset=-36 |
| papdendidx=61 |
| |
| il0macaddr=00:90:4c:c5:12:38 |
| wl0id=0x431b |
| |
| deadman_to=0xffffffff |
| # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG |
| muxenab=0x1 |
| # CLDO PWM voltage settings - 0x4 - 1.1 volt |
| #cldo_pwm=0x4 |
| |
| #VCO freq 326.4MHz |
| spurconfig=0x3 |