meta-fii/meta-kudo: Add new meta layer for Fii Kudo project
First drop for the meta-kudo layer, initial machine configuration
to supports Nuvoton npcm730 chip and the Ampere ARM system
Tested-by:
1. Load image on the Nuvoton RunBMC CRB
2. Use ipmitool to test the command under BMC console
a. ipmitool mc info
b. ipmitool sdr
c. ipmitool lan print
d. ipmitool channel info 1
e. ipmitool user list 1
f. ipmitool chassis status
g. ipmitool raw 0x06 0x01
h. ipmitool power status
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Ic34b77affe0c08e84762ef795f9f06011bd269ce
diff --git a/meta-fii/meta-kudo/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config b/meta-fii/meta-kudo/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
new file mode 100644
index 0000000..0c38427
--- /dev/null
+++ b/meta-fii/meta-kudo/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
@@ -0,0 +1,24 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x4000
+
+# MTD SPI-dataflash example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+#/dev/mtd5 0x4200 0x4200
+#/dev/mtd6 0x4200 0x4200
+
+# NAND example
+#/dev/mtd0 0x4000 0x4000 0x20000 2
+
+# Block device example
+#/dev/mmcblk0 0xc0000 0x20000
+
+# VFAT example
+#/boot/uboot.env 0x0000 0x4000