meta-facebook: Introducing meta-yosemitev2
Initial introduction of Facebook Yosemite V2 platform. The Yosemite
V2 is a multi-node server platforms that hosts four OCP server and
equipped with Aspeed 2500 BMC SoC.
Tested: Built Facebook Yosemite v2 image and loaded on the
target hardware. Ensured that BMC boots to console.
(From meta-facebook rev: 83e4ecf31aa9b818e8bc9ed4e237f3f9e6a6c2a9)
Change-Id: Iaa22e15371292321b636e1e1cf4bbec2d6fe1bff
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-facebook/meta-yosemitev2/conf/bblayers.conf.sample b/meta-facebook/meta-yosemitev2/conf/bblayers.conf.sample
new file mode 100644
index 0000000..4e094ef
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/conf/bblayers.conf.sample
@@ -0,0 +1,35 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "8"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-poky \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-openembedded/meta-webserver \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-openpower \
+ ##OEROOT##/meta-facebook \
+ ##OEROOT##/meta-facebook/meta-yosemitev2 \
+ "
+BBLAYERS_NON_REMOVABLE ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-poky \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-openembedded/meta-webserver \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-openpower \
+ ##OEROOT##/meta-facebook \
+ ##OEROOT##/meta-facebook/meta-yosemitev2 \
+ "
diff --git a/meta-facebook/meta-yosemitev2/conf/conf-notes.txt b/meta-facebook/meta-yosemitev2/conf/conf-notes.txt
new file mode 100644
index 0000000..9b3c01a
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/conf/conf-notes.txt
@@ -0,0 +1,2 @@
+Common targets are:
+ obmc-phosphor-image
diff --git a/meta-facebook/meta-yosemitev2/conf/layer.conf b/meta-facebook/meta-yosemitev2/conf/layer.conf
new file mode 100644
index 0000000..4c4571a
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/conf/layer.conf
@@ -0,0 +1,11 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+ ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "yosemitev2-layer"
+BBFILE_PATTERN_yosemitev2-layer := "^${LAYERDIR}/"
+
+LAYERSERIES_COMPAT_tiogapass-layer := "warrior zeus"
diff --git a/meta-facebook/meta-yosemitev2/conf/local.conf.sample b/meta-facebook/meta-yosemitev2/conf/local.conf.sample
new file mode 100644
index 0000000..cbbcb84
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/conf/local.conf.sample
@@ -0,0 +1,223 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+MACHINE ??= "yosemitev2"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "openbmc-phosphor"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specifies the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+SANITY_TESTED_DISTROS_append ?= " *"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necessary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. This assumes there is a
+# libsdl library available on your build system.
+#PACKAGECONFIG_append_pn-qemu-native = " sdl"
+#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Set the root password to '0penBmc'
+INHERIT += "extrausers"
+
+EXTRA_USERS_PARAMS = " \
+ usermod -p '\$1\$UGMqyqdG\$FZiylVFmRRfl9Z0Ue8G7e/' root; \
+ "
diff --git a/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf b/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf
new file mode 100644
index 0000000..43e156f
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf
@@ -0,0 +1,21 @@
+KMACHINE = "aspeed"
+KERNEL_DEVICETREE = "${KMACHINE}-bmc-facebook-${MACHINE}.dtb"
+
+UBOOT_MACHINE = "ast_g5_ncsi_config"
+
+require conf/machine/include/ast2500.inc
+require conf/machine/include/obmc-bsp-common.inc
+
+OBMC_MACHINE_FEATURES += "\
+ obmc-phosphor-fan-mgmt \
+ obmc-phosphor-chassis-mgmt \
+ obmc-phosphor-flash-mgmt \
+ obmc-host-ipmi \
+ obmc-host-state-mgmt \
+ obmc-chassis-state-mgmt \
+ obmc-bmc-state-mgmt \
+ "
+PREFERRED_PROVIDER_virtual/obmc-host-ctl ?= ""
+FLASH_SIZE = "32768"
+VIRTUAL-RUNTIME_skeleton_workbook = "${MACHINE}-config"
+
diff --git a/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-board-aspeed-Add-Mux-for-yosemitev2.patch b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-board-aspeed-Add-Mux-for-yosemitev2.patch
new file mode 100644
index 0000000..5634ce9
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed/0002-board-aspeed-Add-Mux-for-yosemitev2.patch
@@ -0,0 +1,259 @@
+From c2e01a4cc220b9a1c1a6bb52e5f58bcc8d2edc55 Mon Sep 17 00:00:00 2001
+From: manikandan-e <manikandan.hcl.ers.epl@gmail.com>
+Date: Wed, 30 Oct 2019 19:43:51 +0530
+Subject: [PATCH 2/2] board-aspeed-Add-Mux-for-yosemitev2
+
+Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@gmail.com>
+
+---
+ arch/arm/mach-aspeed/platform_g5.S | 213 +++++++++++++++++++++++++++++++------
+ 1 file changed, 183 insertions(+), 30 deletions(-)
+
+diff --git a/arch/arm/mach-aspeed/platform_g5.S b/arch/arm/mach-aspeed/platform_g5.S
+index 2ac1ca4..c3ce077 100644
+--- a/arch/arm/mach-aspeed/platform_g5.S
++++ b/arch/arm/mach-aspeed/platform_g5.S
+@@ -302,6 +302,156 @@ TIME_TABLE_DDR4_1600:
+ ldr r2, =0x00000800
+ .endm
+
++ .macro console_bmc
++ ldr r0, =0x1e780024
++ldr r1, [r0]
++orr r1, r1, #0xF
++str r1, [r0]
++
++ldr r0, =0x1e780020
++ldr r1, [r0]
++and r1, r1, #0xFFFFFFF0
++orr r1, r1, #0xC
++str r1, [r0]
++.endm
++
++.macro console_sel
++
++ // Disable SoL UARTs[1-4]
++ ldr r0, =0x1e6e2080
++ ldr r1, [r0]
++ ldr r2, =0xBFBFFFFF
++ and r1, r1, r2
++ str r1, [r0]
++
++ ldr r0, =0x1e6e2084
++ ldr r1, [r0]
++ and r1, r1, r2
++ str r1, [r0]
++ // Enable GPIOE[0-3] Tolerant
++ ldr r0, =0x1e78003c
++ ldr r1, [r0]
++ orr r1, r1, #0xF
++ str r1, [r0]
++
++ // Read debug card present
++ ldr r2, =0x1e780080
++ ldr r0, [r2]
++ and r0, r0, #0x00000800
++ ldr r1, =0x0800
++ cmp r0, r1
++ bne dbg_card_pres\@
++ console_bmc
++ b case_end\@
++
++dbg_card_pres\@:
++ // Read key position
++ ldr r2, =0x1e7801e0
++ ldr r0, [r2]
++ bic r1, r0, #0xFF0FFFFF
++ mov r0, r1, lsr #20
++ //Test for position#1
++ ldr r1, =0x00
++ cmp r0, r1
++ bne case_pos2\@
++ console_bmc
++ b case_end\@
++case_pos2\@:
++ //Test for position#2
++ ldr r1, =0x01
++ cmp r0, r1
++ bne case_pos3\@
++ console_bmc
++ b case_end\@
++case_pos3\@:
++ //Test for position#3
++ ldr r1, =0x02
++ cmp r0, r1
++ bne case_pos4\@
++ console_bmc
++ b case_end\@
++case_pos4\@:
++//Test for position#4
++ ldr r1, =0x03
++ cmp r0, r1
++ bne case_pos5\@
++ console_bmc
++ b case_end\@
++case_pos5\@:
++ //Test for position#5
++ ldr r1, =0x04
++ cmp r0, r1
++ bne case_pos6\@
++ console_bmc
++ b case_end\@
++case_pos6\@:
++ //Test for position#6
++ ldr r1, =0x05
++ cmp r0, r1
++ bne case_pos7\@
++ console_bmc
++ b case_end\@
++case_pos7\@:
++ //Test for position#7
++ ldr r1, =0x06
++ cmp r0, r1
++ bne case_pos8\@
++ console_bmc
++ b case_end\@
++case_pos8\@:
++ //Test for position#8
++ ldr r1, =0x07
++ cmp r0, r1
++ bne case_pos9\@
++ console_bmc
++ b case_end\@
++case_pos9\@:
++ //Test for position#9
++ ldr r1, =0x08
++ cmp r0, r1
++ bne case_pos10\@
++ console_bmc
++ b case_end\@
++case_pos10\@:
++ //Test for position#10
++ ldr r1, =0x09
++ cmp r0, r1
++ bne case_end\@
++ console_bmc
++ b case_end\@
++case_end\@:
++.endm
++
++ .macro uart_console_setup
++ console_sel
++ /* setup UART console */
++ ldr r0, =0x1E78400C
++ mov r1, #0x83
++ str r1, [r0]
++
++ ldr r0, =0x1e6e202c
++ ldr r2, [r0]
++ mov r2, r2, lsr #12
++ tst r2, #0x01
++ ldr r0, =0x1E784000
++ moveq r1, #0x0D @ Baudrate 115200
++ movne r1, #0x01 @ Baudrate 115200, div13
++
++ str r1, [r0]
++
++ ldr r0, =0x1E784004
++ mov r1, #0x00
++ str r1, [r0]
++
++ ldr r0, =0x1E78400C
++ mov r1, #0x03
++ str r1, [r0]
++
++ ldr r0, =0x1E784008
++ mov r1, #0x07
++ str r1, [r0]
++ .endm
++
+ .macro print_hex_char
+ and r1, r1, #0xF
+ cmp r1, #9
+@@ -324,6 +474,36 @@ init_dram:
+ /********************************************
+ Initial Reset Procedure : Begin
+ *******************************************/
++ /* save into SRAM */
++ ldr r0, =0x1e720200 /* vbs.uboot_exec_address */
++ str r4, [r0]
++
++ uart_console_setup
++
++ /* Debug - UART console message */
++ ldr r0, =0x1E784000
++ mov r1, #0x0D @ '\r'
++ str r1, [r0]
++ mov r1, #0x0A @ '\n'
++ str r1, [r0]
++ mov r1, #0x54 @ 'S'
++ str r1, [r0]
++ mov r1, #0x50 @ 'P'
++ str r1, [r0]
++ mov r1, #0x4C @ 'L'
++ str r1, [r0]
++ mov r1, #0x0D @ '\r'
++ str r1, [r0]
++ mov r1, #0x0A @ '\n'
++ str r1, [r0]
++ /* End Debug - UART console message */
++
++
++
++ ldr r0, =0x1E720204
++ mov r1, #0x0
++ str r1, [r0]
++
+ /* Clear AHB bus lock condition */
+ ldr r0, =0x1e600000
+ ldr r1, =0xAEED1A03
+@@ -793,7 +973,9 @@ wait_ddr_reset:
+ clear_delay_timer
+ /* end delay 10ms */
+
+-/* Debug - UART console message */
++ uart_console_setup
++
++ /* Debug - UART console message */
+ #ifdef CONFIG_DRAM_UART_TO_UART1
+ ldr r0, =0x1e78909c @ route UART5 to UART Port1, 2016.08.29
+ ldr r1, =0x10000004
+@@ -806,35 +988,6 @@ wait_ddr_reset:
+ str r1, [r0]
+ #endif
+
+- ldr r0, =0x1e78400c
+- mov r1, #0x83
+- str r1, [r0]
+-
+- ldr r0, =0x1e6e202c
+- ldr r2, [r0]
+- mov r2, r2, lsr #12
+- tst r2, #0x01
+- ldr r0, =0x1e784000
+- moveq r1, #0x0D @ Baudrate 115200
+- movne r1, #0x01 @ Baudrate 115200, div13
+-#ifdef CONFIG_DRAM_UART_38400
+- moveq r1, #0x27 @ Baudrate 38400
+- movne r1, #0x03 @ Baudrate 38400 , div13
+-#endif
+- str r1, [r0]
+-
+- ldr r0, =0x1e784004
+- mov r1, #0x00
+- str r1, [r0]
+-
+- ldr r0, =0x1e78400c
+- mov r1, #0x03
+- str r1, [r0]
+-
+- ldr r0, =0x1e784008
+- mov r1, #0x07
+- str r1, [r0]
+-
+ ldr r0, =0x1e784000
+ mov r1, #0x0D @ '\r'
+ str r1, [r0]
+--
+2.7.4
+
diff --git a/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend
new file mode 100644
index 0000000..51d98a5
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed_%.bbappend
@@ -0,0 +1,2 @@
+FILESEXTRAPATHS_prepend_yosemitev2 := "${THISDIR}/${PN}:"
+SRC_URI_append_yosemitev2 = " file://0002-board-aspeed-Add-Mux-for-yosemitev2.patch"
diff --git a/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed/yosemitev2.cfg b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed/yosemitev2.cfg
new file mode 100644
index 0000000..7ea8dc3
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed/yosemitev2.cfg
@@ -0,0 +1,6 @@
+CONFIG_SENSORS_TMP421=y
+CONFIG_SENSORS_MAX31785=y
+CONFIG_RTC_DRV_RV8803=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
+CONFIG_NCSI_OEM_CMD_GET_MAC=y
diff --git a/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed_%.bbappend
new file mode 100644
index 0000000..9020b66
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/recipes-kernel/linux/linux-aspeed_%.bbappend
@@ -0,0 +1,2 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/linux-aspeed:"
+SRC_URI += "file://yosemitev2.cfg"
diff --git a/meta-facebook/meta-yosemitev2/recipes.txt b/meta-facebook/meta-yosemitev2/recipes.txt
new file mode 100644
index 0000000..73263d8
--- /dev/null
+++ b/meta-facebook/meta-yosemitev2/recipes.txt
@@ -0,0 +1,2 @@
+recipes-kernel - The kernel and generic applications/libraries with strong kernel dependencies
+recipes-bsp - Aspeed BSP with uboot