diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling.bb b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling.bb
index 2889517..16fde56 100644
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling.bb
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling.bb
@@ -9,38 +9,16 @@
 RDEPENDS:${PN} += "virtual/obmc-gpio-monitor"
 RDEPENDS:${PN} += "bash"
 
-SRC_URI += " \
-            file://toggle_fault_led.sh \
-            file://ampere_psu_reset_hotswap.sh \
-            file://toggle_identify_led.sh \
-            file://ampere_scp_failover.sh \
-           "
-
 AMPERE_MONITOR_INSTANCES = " \
-                            reboot_ack shutdown_ack id_button S0_scp_auth_failure \
-                            S0_overtemp S0_hightemp_start S0_hightemp_stop \
-                            S1_overtemp S1_hightemp_start S1_hightemp_stop \
-                            S0_fault_alert_start S0_fault_alert_stop \
-                            S1_fault_alert_start S1_fault_alert_stop \
-                            PSU1_VIN_GOOD PSU2_VIN_GOOD \
+                            S0_hightemp_start S0_hightemp_stop \
+                            S1_hightemp_start S1_hightemp_stop \
                            "
 
 SYSTEMD_ENVIRONMENT_FILE:${PN} +=" \
-                                  obmc/gpio/reboot_ack \
-                                  obmc/gpio/shutdown_ack \
-                                  obmc/gpio/S0_scp_auth_failure \
-                                  obmc/gpio/S0_overtemp \
                                   obmc/gpio/S0_hightemp_start \
                                   obmc/gpio/S0_hightemp_stop \
-                                  obmc/gpio/S1_overtemp \
                                   obmc/gpio/S1_hightemp_start \
                                   obmc/gpio/S1_hightemp_stop \
-                                  obmc/gpio/S0_fault_alert_start \
-                                  obmc/gpio/S0_fault_alert_stop \
-                                  obmc/gpio/S1_fault_alert_start \
-                                  obmc/gpio/S1_fault_alert_stop \
-                                  obmc/gpio/PSU1_VIN_GOOD \
-                                  obmc/gpio/PSU2_VIN_GOOD \
                                  "
 
 TMPL = "phosphor-gpio-monitor@.service"
@@ -49,21 +27,8 @@
 FMT = "../${TMPL}:${TGT}.requires/${INSTFMT}"
 
 SYSTEMD_SERVICE:${PN} += " \
-                          ampere-host-shutdown-ack@.service \
-                          ampere_overtemp@.service \
                           ampere_hightemp_start@.service \
                           ampere_hightemp_stop@.service \
-                          ampere_fault_led_start@.service \
-                          ampere_fault_led_stop@.service \
-                          psu_hotswap_reset@.service \
-                          ampere_scp_failover.service \
                          "
 SYSTEMD_LINK:${PN} += "${@compose_list(d, 'FMT', 'AMPERE_MONITOR_INSTANCES')}"
 
-do_install() {
-    install -d ${D}${sbindir}
-    install -m 0755 ${WORKDIR}/toggle_fault_led.sh ${D}${sbindir}/
-    install -m 0755 ${WORKDIR}/toggle_identify_led.sh ${D}${sbindir}/
-    install -m 0755 ${WORKDIR}/ampere_psu_reset_hotswap.sh ${D}${sbindir}/
-    install -m 0755 ${WORKDIR}/ampere_scp_failover.sh ${D}${sbindir}/
-}
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_fault_led_start@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_fault_led_start@.service
deleted file mode 100644
index 18ee1be..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_fault_led_start@.service
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=Ampere Computing LLC fault event condition service
-Wants=mapper-wait@-xyz-openbmc_project-led-groups.service
-After=mapper-wait@-xyz-openbmc_project-led-groups.service
-StartLimitIntervalSec=0
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/env toggle_fault_led.sh %i on
-SyslogIdentifier=fault-led
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_fault_led_stop@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_fault_led_stop@.service
deleted file mode 100644
index 83f442c..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_fault_led_stop@.service
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=Ampere Computing LLC fault event condition service
-Wants=mapper-wait@-xyz-openbmc_project-led-groups.service
-After=mapper-wait@-xyz-openbmc_project-led-groups.service
-StartLimitIntervalSec=0
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/env toggle_fault_led.sh %i off
-SyslogIdentifier=fault-led
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_overtemp@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_overtemp@.service
deleted file mode 100644
index 587cba1..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_overtemp@.service
+++ /dev/null
@@ -1,7 +0,0 @@
-[Unit]
-Description=Ampere Computing LLC Overtemp event
-
-[Service]
-Restart=no
-ExecStart=/usr/bin/env obmcutil chassisoff
-ExecStartPost=/usr/bin/env ampere_add_redfishevent.sh OpenBMC.0.1.CPUThermalTrip.Critical %i
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/PSU1_VIN_GOOD b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/PSU1_VIN_GOOD
deleted file mode 100644
index cf13085..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/PSU1_VIN_GOOD
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=60
-POLARITY=0
-TARGET=psu_hotswap_reset@0.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/PSU2_VIN_GOOD b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/PSU2_VIN_GOOD
deleted file mode 100644
index 7588c25..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/PSU2_VIN_GOOD
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=61
-POLARITY=0
-TARGET=psu_hotswap_reset@1.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_fault_alert_start b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_fault_alert_start
deleted file mode 100644
index c13da44..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_fault_alert_start
+++ /dev/null
@@ -1,5 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=73
-POLARITY=1
-TARGET=ampere_fault_led_start@0.service
-EXTRA_ARGS=--continue
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_fault_alert_stop b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_fault_alert_stop
deleted file mode 100644
index 7233f88..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_fault_alert_stop
+++ /dev/null
@@ -1,5 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=73
-POLARITY=0
-TARGET=ampere_fault_led_stop@0.service
-EXTRA_ARGS=--continue
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_overtemp b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_overtemp
deleted file mode 100644
index e39e196..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_overtemp
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=51
-POLARITY=1
-TARGET=ampere_overtemp@0.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_scp_auth_failure b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_scp_auth_failure
deleted file mode 100644
index e8e975f..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S0_scp_auth_failure
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=74
-POLARITY=1
-TARGET=ampere_scp_failover.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_fault_alert_start b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_fault_alert_start
deleted file mode 100644
index 6fa4785..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_fault_alert_start
+++ /dev/null
@@ -1,5 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=201
-POLARITY=1
-TARGET=ampere_fault_led_start@1.service
-EXTRA_ARGS=--continue
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_fault_alert_stop b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_fault_alert_stop
deleted file mode 100644
index 36b29ec..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_fault_alert_stop
+++ /dev/null
@@ -1,5 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=201
-POLARITY=0
-TARGET=ampere_fault_led_stop@1.service
-EXTRA_ARGS=--continue
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_overtemp b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_overtemp
deleted file mode 100644
index c7bb8c1..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/S1_overtemp
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/by-path/platform-gpio-keys-event
-KEY=206
-POLARITY=1
-TARGET=ampere_overtemp@1.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/reboot_ack b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/reboot_ack
deleted file mode 100644
index a8ad98e..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/reboot_ack
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/event0
-KEY=75
-POLARITY=1
-TARGET=obmc-host-force-warm-reboot@0.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/shutdown_ack b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/shutdown_ack
deleted file mode 100644
index 18cc872..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/obmc/gpio/shutdown_ack
+++ /dev/null
@@ -1,4 +0,0 @@
-DEVPATH=/dev/input/event0
-KEY=50
-POLARITY=1
-TARGET=ampere-host-shutdown-ack@0.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/toggle_fault_led.sh b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/toggle_fault_led.sh
deleted file mode 100644
index 58aa47f..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/toggle_fault_led.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-#
-# Toggle the state of identify LED Group
-
-socket=$1
-isOn=$2
-
-# Create /tmp/fault* file
-if [ "$isOn" == "on" ]; then
-	touch /tmp/fault"$socket"
-else
-	rm /tmp/fault"$socket"
-fi
-
-# Set Fault Led state
-if [[ -f /tmp/fault0 ]] || [[ -f /tmp/fault1 ]]; then
-	target='true'
-else
-	target='false'
-fi
-
-SERVICE="xyz.openbmc_project.LED.GroupManager"
-INTERFACE="xyz.openbmc_project.Led.Group"
-PROPERTY="Asserted"
-
-# Get current state
-object=$(busctl tree $SERVICE --list | grep system_fault)
-
-# Set target state
-busctl set-property $SERVICE "$object" $INTERFACE $PROPERTY b $target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/toggle_identify_led.sh b/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/toggle_identify_led.sh
deleted file mode 100755
index f6eae0e..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/toggle_identify_led.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-#
-# Toggle the state of identify LED Group
-
-SERVICE="xyz.openbmc_project.LED.GroupManager"
-INTERFACE="xyz.openbmc_project.Led.Group"
-PROPERTY="Asserted"
-
-# Get enclosure_identify state
-identify_object=$(busctl tree $SERVICE --list | grep -m 1 identify)
-identify_state=$(busctl get-property $SERVICE "$identify_object" $INTERFACE $PROPERTY \
-			|  awk '{print $NF;}')
-
-# Get enclosure_identify_blink state
-identify_blink_object=$(busctl tree $SERVICE --list | grep identify_blink)
-identify_blink_state=$(busctl get-property $SERVICE "$identify_blink_object" $INTERFACE $PROPERTY \
-			|  awk '{print $NF;}')
-
-# Set state
-if [ "$identify_state" = "false" ] && [ "$identify_blink_state" = "false" ]; then
-    # Turn on the UID LED
-    busctl set-property $SERVICE "$identify_object" $INTERFACE $PROPERTY b true
-elif [ "$identify_state" = "false" ] && [ "$identify_blink_state" = "true" ]; then
-    # Turn off the UID LED when LED is blinking state
-    busctl set-property $SERVICE "$identify_blink_object" $INTERFACE $PROPERTY b false
-elif [ "$identify_state" = "true" ] && [ "$identify_blink_state" = "false" ]; then
-    # Turn off the UID LED
-    busctl set-property $SERVICE "$identify_object" $INTERFACE $PROPERTY b false
-else
-    echo "Invalid case! When identify_blink_state is true, the identify_state will set to false"
-fi
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere-host-shutdown-ack@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere-host-shutdown-ack@.service
similarity index 100%
rename from meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere-host-shutdown-ack@.service
rename to meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere-host-shutdown-ack@.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_overtemp@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_overtemp@.service
new file mode 100644
index 0000000..a3efc9f
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_overtemp@.service
@@ -0,0 +1,7 @@
+[Unit]
+Description=Ampere Computing LLC Overtemp event
+
+[Service]
+Restart=no
+ExecStart=/bin/sh -c "touch /tmp/fault_overtemp && obmcutil chassisoff"
+ExecStartPost=/bin/sh -c "ampere_add_redfishevent.sh OpenBMC.0.1.CPUThermalTrip.Critical %i && sleep 10 && rm /tmp/fault_overtemp"
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_psu_reset_hotswap.sh b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_psu_reset_hotswap.sh
similarity index 100%
rename from meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_psu_reset_hotswap.sh
rename to meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_psu_reset_hotswap.sh
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_scp_failover.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_scp_failover.service
similarity index 100%
rename from meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_scp_failover.service
rename to meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_scp_failover.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_scp_failover.sh b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_scp_failover.sh
similarity index 100%
rename from meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/ampere_scp_failover.sh
rename to meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/ampere_scp_failover.sh
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/phosphor-multi-gpio-monitor.json b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/phosphor-multi-gpio-monitor.json
new file mode 100644
index 0000000..7b89a14
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/phosphor-multi-gpio-monitor.json
@@ -0,0 +1,53 @@
+[
+    {
+        "Name": "REBOOT_ACK",
+	"ChipId": "0",
+	"GpioNum": 75,
+        "EventMon": "FALLING",
+        "Target": "obmc-host-force-warm-reboot@0.target",
+        "Continue": true
+    },
+    {
+        "Name": "SHUTDOWN_ACK",
+	"ChipId": "0",
+	"GpioNum": 50,
+        "EventMon": "FALLING",
+        "Target": "ampere-host-shutdown-ack@0.service",
+        "Continue": true
+    },
+    {
+        "Name": "S0_OVERTEMP",
+        "LineName": "S0_OVERTEMP_L",
+        "EventMon": "FALLING",
+        "Target": "ampere_overtemp@0.service",
+        "Continue": true
+    },
+    {
+        "Name": "S1_OVERTEMP",
+        "LineName": "S1_OVERTEMP_L",
+        "EventMon": "FALLING",
+        "Target": "ampere_overtemp@1.service",
+        "Continue": true
+    },
+    {
+        "Name": "S0_SCP_AUTH_FAIL",
+        "LineName": "S0_SCP_AUTH_FAIL_L",
+        "EventMon": "FALLING",
+        "Target": "ampere_scp_failover.service",
+        "Continue": true
+    },
+    {
+        "Name": "PSU1_VIN_GOOD",
+        "LineName": "PSU1_VIN_GOOD",
+        "EventMon": "RISING",
+        "Target": "psu_hotswap_reset@0.service",
+        "Continue": true
+    },
+    {
+        "Name": "PSU2_VIN_GOOD",
+        "LineName": "PSU2_VIN_GOOD",
+        "EventMon": "RISING",
+        "Target": "psu_hotswap_reset@1.service",
+        "Continue": true
+    }
+]
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/psu_hotswap_reset@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/psu_hotswap_reset@.service
similarity index 100%
rename from meta-ampere/meta-jade/recipes-phosphor/gpio/ampere-gpio-handling/psu_hotswap_reset@.service
rename to meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor/psu_hotswap_reset@.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor_%.bbappend b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor_%.bbappend
new file mode 100644
index 0000000..f798fee
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/phosphor-gpio-monitor_%.bbappend
@@ -0,0 +1,35 @@
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+
+inherit systemd
+inherit obmc-phosphor-systemd
+
+RDEPENDS:${PN}-monitor += "bash"
+RDEPENDS:${PN} += "bash"
+
+SRC_URI += " \
+            file://phosphor-multi-gpio-monitor.json \
+            file://ampere_scp_failover.sh \
+            file://ampere_psu_reset_hotswap.sh \
+           "
+
+SYSTEMD_SERVICE:${PN}-monitor += " \
+                                  ampere-host-shutdown-ack@.service \
+                                  ampere_overtemp@.service \
+                                  ampere_scp_failover.service \
+                                  psu_hotswap_reset@.service \
+                                 "
+
+FILES:${PN}-monitor += " \
+                        /usr/share/${PN}/phosphor-multi-gpio-monitor.json \
+                        /usr/sbin/ampere_scp_failover.sh \
+                        /usr/sbin/ampere_psu_reset_hotswap.sh \
+                       "
+
+SYSTEMD_LINK:${PN}-monitor:append = " ../phosphor-multi-gpio-monitor.service:multi-user.target.requires/phosphor-multi-gpio-monitor.service"
+
+do_install:append() {
+    install -d ${D}${sbindir}
+    install -m 0644 ${WORKDIR}/phosphor-multi-gpio-monitor.json ${D}${datadir}/${PN}/
+    install -m 0755 ${WORKDIR}/ampere_scp_failover.sh ${D}${sbindir}/
+    install -m 0755 ${WORKDIR}/ampere_psu_reset_hotswap.sh ${D}${sbindir}/
+}