diff --git a/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0003-misc-aspeed-Add-Aspeed-UART-routing-control-driver.patch b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0003-misc-aspeed-Add-Aspeed-UART-routing-control-driver.patch
new file mode 100644
index 0000000..7076ede
--- /dev/null
+++ b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0003-misc-aspeed-Add-Aspeed-UART-routing-control-driver.patch
@@ -0,0 +1,521 @@
+From dc37d698586a7ca4e4381ef7726249fa70d14c89 Mon Sep 17 00:00:00 2001
+From: Oskar Senft <osk@google.com>
+Date: Wed, 8 Aug 2018 10:15:05 -0400
+Subject: [PATCH 3/5] misc: aspeed: Add Aspeed UART routing control driver.
+
+This driver adds sysfs files that allow the BMC userspace to configure
+how UARTs and physical serial I/O ports are routed.
+
+Tested: Checked correct behavior (both read & write) on TYAN S7106
+board by manually changing routing settings and confirming that bits
+flow as expected. Tested for UART1 and UART3 as this board doesn't have
+the other UARTs wired up in a testable way.
+
+Signed-off-by: Oskar Senft <osk@google.com>
+Signed-off-by: Yong Li <yong.b.li@linux.intel.com>
+Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
+Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
+---
+ .../stable/sysfs-driver-aspeed-uart-routing   |  14 +
+ .../misc-devices/aspeed-uart-routing.txt      |  49 +++
+ drivers/misc/Kconfig                          |   6 +
+ drivers/misc/Makefile                         |   1 +
+ drivers/misc/aspeed-uart-routing.c            | 383 ++++++++++++++++++
+ 5 files changed, 453 insertions(+)
+ create mode 100644 Documentation/ABI/stable/sysfs-driver-aspeed-uart-routing
+ create mode 100644 Documentation/misc-devices/aspeed-uart-routing.txt
+ create mode 100644 drivers/misc/aspeed-uart-routing.c
+
+diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/stable/sysfs-driver-aspeed-uart-routing
+new file mode 100644
+index 000000000000..5068737d9c12
+--- /dev/null
++++ b/Documentation/ABI/stable/sysfs-driver-aspeed-uart-routing
+@@ -0,0 +1,14 @@
++What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/io*
++Date:		August 2018
++Contact:	Oskar Senft <osk@google.com>
++Description:	Configures the input source for the specific physical
++		serial I/O port.
++Users:		OpenBMC.  Proposed changes should be mailed to
++		openbmc@lists.ozlabs.org
++
++What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
++Date:		August 2018
++Contact:	Oskar Senft <osk@google.com>
++Description:	Configures the input source for the specific UART.
++Users:		OpenBMC.  Proposed changes should be mailed to
++		openbmc@lists.ozlabs.org
+diff --git a/Documentation/misc-devices/aspeed-uart-routing.txt b/Documentation/misc-devices/aspeed-uart-routing.txt
+new file mode 100644
+index 000000000000..cf1c2a466875
+--- /dev/null
++++ b/Documentation/misc-devices/aspeed-uart-routing.txt
+@@ -0,0 +1,49 @@
++Kernel driver aspeed-uart-routing
++=================================
++
++Supported chips:
++ASPEED AST2500/AST2600
++
++Author:
++Google LLC
++
++Description
++-----------
++
++The Aspeed AST2500/AST2600 allows to dynamically route the inputs for the
++built-in UARTS and physical serial I/O ports.
++
++This allows, for example, to connect the output of UART to another UART.
++This can be used to enable host<->BMC communication via UARTs, e.g. to allow
++access to the host's serial console.
++
++This driver is for the BMC side. The sysfs files allow the BMC userspace
++which owns the system configuration policy, to configure how UARTs and
++physical serial I/O ports are routed.
++
++The driver provides the following files in sysfs:
++uart1		Configure the input signal to UART1.
++uart2		Configure the input signal to UART2.
++uart3		Configure the input signal to UART3.
++uart4		Configure the input signal to UART4.
++uart5		Configure the input signal to UART5.
++io1		Configure the input signal to physical serial port 1.
++io2		Configure the input signal to physical serial port 2.
++io3		Configure the input signal to physical serial port 3.
++io4		Configure the input signal to physical serial port 4.
++io5		Configure the input signal to physical serial port 5.
++
++When read, each file shows the list of available options with the currently
++selected option marked by square brackets "[]". The list of available options
++depends on the selected file.
++
++Example:
++$ cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
++[io1] io2 io3 io4 uart2 uart3 uart4 io6
++
++In this case, UART1 gets its input signal from IO1 (physical serial port 1).
++
++$ echo -n "uart3" \
++  >/sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
++$ cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
++io1 io2 io3 io4 uart2 [uart3] uart4 io6
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index d8626a0d3e31..48a519c59bdf 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -451,6 +451,12 @@ config MCTP_LPC
+ 	  Implements the MCTP LPC binding via KCS LPC IO cycles for control and
+           LPC FWH cycles for data
+ 
++config ASPEED_UART_ROUTING
++	tristate "Aspeed ast2500 UART routing control"
++	help
++	  If you want to configure UART routing on Aspeed BMC platforms, enable
++	  this option.
++
+ config MISC_RTSX
+ 	tristate
+ 	default MISC_RTSX_PCI || MISC_RTSX_USB
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 183970192ced..4e67e21c2e65 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -60,3 +60,4 @@ obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
+ obj-$(CONFIG_NPCM7XX_LPC_BPC)	+= npcm7xx-lpc-bpc.o
+ obj-$(CONFIG_NPCM7XX_PCI_MBOX)	+= npcm7xx-pci-mbox.o
+ obj-$(CONFIG_MCTP_LPC)		+= mctp-lpc.o
++obj-$(CONFIG_ASPEED_UART_ROUTING) += aspeed-uart-routing.o
+diff --git a/drivers/misc/aspeed-uart-routing.c b/drivers/misc/aspeed-uart-routing.c
+new file mode 100644
+index 000000000000..21ef5d98c317
+--- /dev/null
++++ b/drivers/misc/aspeed-uart-routing.c
+@@ -0,0 +1,383 @@
++/*
++ * UART Routing driver for Aspeed AST2500
++ *
++ * Copyright (c) 2018 Google LLC
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_platform.h>
++
++/* The Aspeed AST2500 allows to dynamically route the inputs for the built-in
++ * UARTS and physical serial I/O ports.
++ *
++ * This allows, for example, to connect the output of UART to another UART.
++ * This can be used to enable host<->BMC communication via UARTs, e.g. to allow
++ * access to the host's serial console.
++ *
++ * This driver is for the BMC side. The sysfs files allow the BMC userspace
++ * which owns the system configuration policy, to configure how UARTs and
++ * physical serial I/O ports are routed.
++ */
++
++#define ASPEED_HICRA_IO1	"io1"
++#define ASPEED_HICRA_IO2	"io2"
++#define ASPEED_HICRA_IO3	"io3"
++#define ASPEED_HICRA_IO4	"io4"
++#define ASPEED_HICRA_IO5	"io5"
++#define ASPEED_HICRA_IO6	"io6"
++#define ASPEED_HICRA_UART1	"uart1"
++#define ASPEED_HICRA_UART2	"uart2"
++#define ASPEED_HICRA_UART3	"uart3"
++#define ASPEED_HICRA_UART4	"uart4"
++#define ASPEED_HICRA_UART5	"uart5"
++
++struct aspeed_uart_routing {
++	struct device		*dev;
++	void __iomem		*regs;
++	spinlock_t		lock;
++};
++
++struct aspeed_uart_routing_selector {
++	struct device_attribute	dev_attr;
++	int				shift;
++	int				mask;
++	const char * const options[];
++};
++
++#define to_routing_selector(_dev_attr)					\
++	container_of(_dev_attr, struct aspeed_uart_routing_selector, dev_attr)
++
++
++static ssize_t aspeed_uart_routing_show(struct device *dev,
++					struct device_attribute *attr,
++					char *buf);
++
++static ssize_t aspeed_uart_routing_store(struct device *dev,
++					 struct device_attribute *attr,
++					 const char *buf, size_t count);
++
++#define ROUTING_ATTR(_name) {						\
++	.attr = {.name = _name,					\
++		 .mode = VERIFY_OCTAL_PERMISSIONS(S_IWUSR | S_IRUGO) }, \
++	.show = aspeed_uart_routing_show,				\
++	.store = aspeed_uart_routing_store,				\
++}
++
++static struct aspeed_uart_routing_selector uart5_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_UART5),
++	.shift = 28,
++	.mask = 0xf,
++	.options = {
++		    ASPEED_HICRA_IO5,   // 0
++		    ASPEED_HICRA_IO1,   // 1
++		    ASPEED_HICRA_IO2,   // 2
++		    ASPEED_HICRA_IO3,   // 3
++		    ASPEED_HICRA_IO4,   // 4
++		    ASPEED_HICRA_UART1, // 5
++		    ASPEED_HICRA_UART2, // 6
++		    ASPEED_HICRA_UART3, // 7
++		    ASPEED_HICRA_UART4, // 8
++		    ASPEED_HICRA_IO6,   // 9
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector uart4_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_UART4),
++	.shift = 25,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_IO4,   // 0
++		    ASPEED_HICRA_IO1,   // 1
++		    ASPEED_HICRA_IO2,   // 2
++		    ASPEED_HICRA_IO3,   // 3
++		    ASPEED_HICRA_UART1, // 4
++		    ASPEED_HICRA_UART2, // 5
++		    ASPEED_HICRA_UART3, // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++	},
++};
++
++static struct aspeed_uart_routing_selector uart3_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_UART3),
++	.shift = 22,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_IO3,   // 0
++		    ASPEED_HICRA_IO4,   // 1
++		    ASPEED_HICRA_IO1,   // 2
++		    ASPEED_HICRA_IO2,   // 3
++		    ASPEED_HICRA_UART4, // 4
++		    ASPEED_HICRA_UART1, // 5
++		    ASPEED_HICRA_UART2, // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector uart2_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_UART2),
++	.shift = 19,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_IO2,   // 0
++		    ASPEED_HICRA_IO3,   // 1
++		    ASPEED_HICRA_IO4,   // 2
++		    ASPEED_HICRA_IO1,   // 3
++		    ASPEED_HICRA_UART3, // 4
++		    ASPEED_HICRA_UART4, // 5
++		    ASPEED_HICRA_UART1, // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector uart1_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_UART1),
++	.shift = 16,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_IO1,   // 0
++		    ASPEED_HICRA_IO2,   // 1
++		    ASPEED_HICRA_IO3,   // 2
++		    ASPEED_HICRA_IO4,   // 3
++		    ASPEED_HICRA_UART2, // 4
++		    ASPEED_HICRA_UART3, // 5
++		    ASPEED_HICRA_UART4, // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector io5_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_IO5),
++	.shift = 12,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_UART5, // 0
++		    ASPEED_HICRA_UART1, // 1
++		    ASPEED_HICRA_UART2, // 2
++		    ASPEED_HICRA_UART3, // 3
++		    ASPEED_HICRA_UART4, // 4
++		    ASPEED_HICRA_IO1,   // 5
++		    ASPEED_HICRA_IO3,   // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector io4_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_IO4),
++	.shift = 9,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_UART4, // 0
++		    ASPEED_HICRA_UART5, // 1
++		    ASPEED_HICRA_UART1, // 2
++		    ASPEED_HICRA_UART2, // 3
++		    ASPEED_HICRA_UART3, // 4
++		    ASPEED_HICRA_IO1,   // 5
++		    ASPEED_HICRA_IO2,   // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector io3_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_IO3),
++	.shift = 6,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_UART3, // 0
++		    ASPEED_HICRA_UART4, // 1
++		    ASPEED_HICRA_UART5, // 2
++		    ASPEED_HICRA_UART1, // 3
++		    ASPEED_HICRA_UART2, // 4
++		    ASPEED_HICRA_IO1,   // 5
++		    ASPEED_HICRA_IO2,   // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector io2_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_IO2),
++	.shift = 3,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_UART2, // 0
++		    ASPEED_HICRA_UART3, // 1
++		    ASPEED_HICRA_UART4, // 2
++		    ASPEED_HICRA_UART5, // 3
++		    ASPEED_HICRA_UART1, // 4
++		    ASPEED_HICRA_IO3,   // 5
++		    ASPEED_HICRA_IO4,   // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++static struct aspeed_uart_routing_selector io1_sel = {
++	.dev_attr = ROUTING_ATTR(ASPEED_HICRA_IO1),
++	.shift = 0,
++	.mask = 0x7,
++	.options = {
++		    ASPEED_HICRA_UART1, // 0
++		    ASPEED_HICRA_UART2, // 1
++		    ASPEED_HICRA_UART3, // 2
++		    ASPEED_HICRA_UART4, // 3
++		    ASPEED_HICRA_UART5, // 4
++		    ASPEED_HICRA_IO3,   // 5
++		    ASPEED_HICRA_IO4,   // 6
++		    ASPEED_HICRA_IO6,   // 7
++		    NULL,               // NULL termination
++		    },
++};
++
++
++static struct attribute *aspeed_uart_routing_attrs[] = {
++	&uart1_sel.dev_attr.attr,
++	&uart2_sel.dev_attr.attr,
++	&uart3_sel.dev_attr.attr,
++	&uart4_sel.dev_attr.attr,
++	&uart5_sel.dev_attr.attr,
++	&io1_sel.dev_attr.attr,
++	&io2_sel.dev_attr.attr,
++	&io3_sel.dev_attr.attr,
++	&io4_sel.dev_attr.attr,
++	&io5_sel.dev_attr.attr,
++	NULL,
++};
++
++static const struct attribute_group aspeed_uart_routing_attr_group = {
++	.attrs = aspeed_uart_routing_attrs,
++};
++
++static ssize_t aspeed_uart_routing_show(struct device *dev,
++					struct device_attribute *attr,
++					char *buf)
++{
++	struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
++	struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
++	int val, pos, len;
++
++	val = (readl(uart_routing->regs) >> sel->shift) & sel->mask;
++
++	len = 0;
++	for (pos = 0; sel->options[pos] != NULL; ++pos) {
++		if (pos == val) {
++			len += snprintf(buf + len, PAGE_SIZE - 1 - len,
++					"[%s] ", sel->options[pos]);
++		} else {
++			len += snprintf(buf + len, PAGE_SIZE - 1 - len,
++					"%s ", sel->options[pos]);
++		}
++	}
++
++	if (val >= pos) {
++		len += snprintf(buf + len, PAGE_SIZE - 1 - len,
++				"[unknown(%d)]", val);
++	}
++
++	len += snprintf(buf + len, PAGE_SIZE - 1 - len, "\n");
++
++	return len;
++}
++
++static ssize_t aspeed_uart_routing_store(struct device *dev,
++					 struct device_attribute *attr,
++					 const char *buf, size_t count)
++{
++	struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
++	struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
++	int val;
++	u32 reg;
++
++	val = match_string(sel->options, -1, buf);
++	if (val < 0) {
++		dev_err(dev, "invalid value \"%s\"\n", buf);
++		return -EINVAL;
++	}
++
++	spin_lock(&uart_routing->lock);
++	reg = readl(uart_routing->regs);
++	// Zero out existing value in specified bits.
++	reg &= ~(sel->mask << sel->shift);
++	// Set new value in specified bits.
++	reg |= (val & sel->mask) << sel->shift;
++	writel(reg, uart_routing->regs);
++	spin_unlock(&uart_routing->lock);
++
++	return count;
++}
++
++static int aspeed_uart_routing_probe(struct platform_device *pdev)
++{
++	struct aspeed_uart_routing *uart_routing;
++	struct resource *res;
++	int rc;
++
++	uart_routing = devm_kzalloc(&pdev->dev,
++				    sizeof(*uart_routing),
++				    GFP_KERNEL);
++	if (!uart_routing)
++		return -ENOMEM;
++
++	spin_lock_init(&uart_routing->lock);
++	uart_routing->dev = &pdev->dev;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	uart_routing->regs = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(uart_routing->regs))
++		return PTR_ERR(uart_routing->regs);
++
++	rc = sysfs_create_group(&uart_routing->dev->kobj,
++				&aspeed_uart_routing_attr_group);
++	if (rc < 0)
++		return rc;
++
++	platform_set_drvdata(pdev, uart_routing);
++
++	return 0;
++}
++
++static int aspeed_uart_routing_remove(struct platform_device *pdev)
++{
++	struct aspeed_uart_routing *uart_routing = platform_get_drvdata(pdev);
++
++	sysfs_remove_group(&uart_routing->dev->kobj,
++			   &aspeed_uart_routing_attr_group);
++
++	return 0;
++}
++
++static const struct of_device_id aspeed_uart_routing_table[] = {
++	{ .compatible = "aspeed,ast2500-uart-routing" },
++	{ },
++};
++
++static struct platform_driver aspeed_uart_routing_driver = {
++	.driver = {
++		.name = "aspeed-uart-routing",
++		.of_match_table = aspeed_uart_routing_table,
++	},
++	.probe = aspeed_uart_routing_probe,
++	.remove = aspeed_uart_routing_remove,
++};
++
++module_platform_driver(aspeed_uart_routing_driver);
++
++MODULE_AUTHOR("Oskar Senft <osk@google.com>");
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Driver to configure Aspeed UART routing");
+-- 
+2.25.1
+
diff --git a/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0004-ARM-dts-aspeed-Add-uart-routing-node.patch b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0004-ARM-dts-aspeed-Add-uart-routing-node.patch
new file mode 100644
index 0000000..645a093
--- /dev/null
+++ b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0004-ARM-dts-aspeed-Add-uart-routing-node.patch
@@ -0,0 +1,48 @@
+From c12fc8a0f748358f76ff5a883a390301f86f079f Mon Sep 17 00:00:00 2001
+From: John Wang <wangzhiqiang.bj@bytedance.com>
+Date: Wed, 30 Sep 2020 12:41:30 +0800
+Subject: [PATCH 4/5] ARM: dts: aspeed: Add uart-routing node
+
+Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
+---
+ arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
+ arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++++
+ 2 files changed, 12 insertions(+)
+
+diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
+index 19288495f41a..de9a8fd3933f 100644
+--- a/arch/arm/boot/dts/aspeed-g5.dtsi
++++ b/arch/arm/boot/dts/aspeed-g5.dtsi
+@@ -522,6 +522,12 @@ sio_regs: regs {
+ 						compatible = "aspeed,bmc-misc";
+ 					};
+ 				};
++
++				uart_routing: uart_routing@9c {
++					compatible = "aspeed,ast2500-uart-routing";
++					reg = <0x9c 0x4>;
++					status = "disabled";
++				};
+ 			};
+ 
+ 			peci: bus@1e78b000 {
+diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
+index 97ca743363d7..9938b8f224f6 100644
+--- a/arch/arm/boot/dts/aspeed-g6.dtsi
++++ b/arch/arm/boot/dts/aspeed-g6.dtsi
+@@ -311,6 +311,12 @@ pinctrl: pinctrl {
+ 					compatible = "aspeed,ast2600-pinctrl";
+ 				};
+ 
++				uart_routing: uart_routing@9c {
++					compatible = "aspeed,ast2500-uart-routing";
++					reg = <0x9c 0x4>;
++					status = "disabled";
++				};
++
+ 				smp-memram@180 {
+ 					compatible = "aspeed,ast2600-smpmem";
+ 					reg = <0x180 0x40>;
+-- 
+2.25.1
+
diff --git a/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0005-ARM-dts-aspeed-Enable-g220a-uart-route.patch b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0005-ARM-dts-aspeed-Enable-g220a-uart-route.patch
new file mode 100644
index 0000000..fb26499
--- /dev/null
+++ b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0005-ARM-dts-aspeed-Enable-g220a-uart-route.patch
@@ -0,0 +1,25 @@
+From 6901c1fb9c8fbf33461811b9f1667bcaf876b747 Mon Sep 17 00:00:00 2001
+From: John Wang <wangzhiqiang.bj@bytedance.com>
+Date: Wed, 30 Sep 2020 13:02:22 +0800
+Subject: [PATCH 5/5] ARM: dts: aspeed: Enable g220a uart route
+
+Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
+---
+ arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+index 2ae2684c115c..c18ca23f57ac 100644
+--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
++++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+@@ -929,3 +929,7 @@ &video {
+ &vhub {
+ 	status = "okay";
+ };
++
++&uart_routing {
++       status = "okay";
++};
+-- 
+2.25.1
+
diff --git a/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed_%.bbappend
index ab351eb..0df63c8 100644
--- a/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed_%.bbappend
+++ b/meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed_%.bbappend
@@ -1,4 +1,7 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
 SRC_URI_append_g220a = " file://g220a.cfg \
+			 file://0003-misc-aspeed-Add-Aspeed-UART-routing-control-driver.patch \
+			 file://0004-ARM-dts-aspeed-Add-uart-routing-node.patch \
+			 file://0005-ARM-dts-aspeed-Enable-g220a-uart-route.patch \
                        "