meta-facebook: more prep for new override syntax
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I21120d6215c25be49afd60d6e807b68f2798423a
diff --git a/meta-facebook/meta-yosemitev2/conf/layer.conf b/meta-facebook/meta-yosemitev2/conf/layer.conf
index 9144ca5..091cdc3 100644
--- a/meta-facebook/meta-yosemitev2/conf/layer.conf
+++ b/meta-facebook/meta-yosemitev2/conf/layer.conf
@@ -6,6 +6,6 @@
${LAYERDIR}/recipes-*/*/*.bbappend"
BBFILE_COLLECTIONS += "yosemitev2-layer"
-BBFILE_PATTERN:yosemitev2-layer := "^${LAYERDIR}/"
+BBFILE_PATTERN_yosemitev2-layer := "^${LAYERDIR}/"
-LAYERSERIES_COMPAT:yosemitev2-layer := "gatesgarth hardknott"
+LAYERSERIES_COMPAT_yosemitev2-layer := "gatesgarth hardknott honister"
diff --git a/meta-facebook/meta-yosemitev2/conf/local.conf.sample b/meta-facebook/meta-yosemitev2/conf/local.conf.sample
index 069682d..2dc366c 100644
--- a/meta-facebook/meta-yosemitev2/conf/local.conf.sample
+++ b/meta-facebook/meta-yosemitev2/conf/local.conf.sample
@@ -2,7 +2,9 @@
# This file is your local configuration file and is where all local user settings
# are placed. The comments in this file give some guide to the options a new user
# to the system might want to change but pretty much any configuration option can
-# be set in this file.
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
#
# Lines starting with the '#' character are commented out and in some cases the
# default values are provided as comments to show people example syntax. Enabling
@@ -85,12 +87,12 @@
PACKAGE_CLASSES ?= "package_rpm"
#
-# SDK/ADT target architecture
+# SDK target architecture
#
-# This variable specifies the architecture to build SDK/ADT items for and means
+# This variable specifies the architecture to build SDK items for and means
# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
+# Supported values are i686, x86_64, aarch64
#SDKMACHINE ?= "i686"
SANITY_TESTED_DISTROS:append ?= " *"
@@ -103,6 +105,8 @@
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -110,14 +114,14 @@
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
# "tools-debug" - add debugging tools (gdb, strace)
# "eclipse-debug" - add Eclipse remote debugging support
-# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
# "debug-tweaks" - make an image suitable for development
# e.g. ssh root access has a blank password
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
#
# Additional image features
@@ -126,20 +130,18 @@
# enable extra features. Some available options which can be included in this variable
# are:
# - 'buildstats' collect build statistics
-# - 'image-prelink' in order to prelink the filesystem image
-# - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-prelink"
+USER_CLASSES ?= "buildstats"
#
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -164,12 +166,12 @@
#
# Monitor the disk space during the build. If there is less that 1GB of space or less
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard abort
# of the build. The reason for this is that running completely out of space can corrupt
# files and damages the build in ways which may not be easily recoverable.
# It's necessary to monitor /tmp, if there is no space left the build will fail
# with very exotic errors.
-BB_DISKMON_DIRS = "\
+BB_DISKMON_DIRS ??= "\
STOPTASKS,${TMPDIR},1G,100K \
STOPTASKS,${DL_DIR},1G,100K \
STOPTASKS,${SSTATE_DIR},1G,100K \
@@ -182,7 +184,7 @@
#
# Shared-state files from other locations
#
-# As mentioned above, shared state files are prebuilt cache data objects which can
+# As mentioned above, shared state files are prebuilt cache data objects which can be
# used to accelerate build time. This variable can be used to configure the system
# to search other mirror locations for these objects before it builds the data itself.
#
@@ -197,17 +199,55 @@
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-#PACKAGECONFIG:append:pn-qemu-native = " sdl"
-#PACKAGECONFIG:append:pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+# By default native qemu will build with a builtin VNC server where graphical output can be
+# seen. The line below enables the SDL UI frontend too.
+PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
+# By default libsdl2-native will be built, if you want to use your host's libSDL instead of
+# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+#ASSUME_PROVIDED += "libsdl2-native"
+# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
+# a handy set of menus for controlling the emulator.
+#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+"
+
+#
+# Hash Equivalence
+#
+# Enable support for automatically running a local hash equivalence server and
+# instruct bitbake to use a hash equivalence aware signature generator. Hash
+# equivalence improves reuse of sstate by detecting when a given sstate
+# artifact can be reused as equivalent, even if the current task hash doesn't
+# match the one that generated the artifact.
+#
+# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
+#
+#BB_HASHSERVE = "auto"
+#BB_SIGNATURE_HANDLER = "OEEquivHash"
+
+#
+# Memory Resident Bitbake
+#
+# Bitbake's server component can stay in memory after the UI for the current command
+# has completed. This means subsequent commands can run faster since there is no need
+# for bitbake to reload cache files and so on. Number is in seconds, after which the
+# server will shut down.
+#
+#BB_SERVER_TIMEOUT = "60"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf b/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf
index 9119189..d246cc9 100644
--- a/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf
+++ b/meta-facebook/meta-yosemitev2/conf/machine/yosemitev2.conf
@@ -9,6 +9,6 @@
SERIAL_CONSOLES = "57600;ttyS4"
-PREFERRED_PROVIDER:virtual/obmc-host-ctl ?= ""
+PREFERRED_PROVIDER_virtual/obmc-host-ctl ?= ""
FLASH_SIZE = "32768"
OBMC_HOST_INSTANCES = "1 2 3 4"