diff --git a/poky/documentation/dev-manual/build-quality.rst b/poky/documentation/dev-manual/build-quality.rst
new file mode 100644
index 0000000..713ea3a
--- /dev/null
+++ b/poky/documentation/dev-manual/build-quality.rst
@@ -0,0 +1,409 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Maintaining Build Output Quality
+********************************
+
+Many factors can influence the quality of a build. For example, if you
+upgrade a recipe to use a new version of an upstream software package or
+you experiment with some new configuration options, subtle changes can
+occur that you might not detect until later. Consider the case where
+your recipe is using a newer version of an upstream package. In this
+case, a new version of a piece of software might introduce an optional
+dependency on another library, which is auto-detected. If that library
+has already been built when the software is building, the software will
+link to the built library and that library will be pulled into your
+image along with the new software even if you did not want the library.
+
+The :ref:`ref-classes-buildhistory` class helps you maintain the quality of
+your build output. You can use the class to highlight unexpected and possibly
+unwanted changes in the build output. When you enable build history, it records
+information about the contents of each package and image and then commits that
+information to a local Git repository where you can examine the information.
+
+The remainder of this section describes the following:
+
+-  :ref:`How you can enable and disable build history <dev-manual/build-quality:enabling and disabling build history>`
+
+-  :ref:`How to understand what the build history contains <dev-manual/build-quality:understanding what the build history contains>`
+
+-  :ref:`How to limit the information used for build history <dev-manual/build-quality:using build history to gather image information only>`
+
+-  :ref:`How to examine the build history from both a command-line and web interface <dev-manual/build-quality:examining build history information>`
+
+Enabling and Disabling Build History
+====================================
+
+Build history is disabled by default. To enable it, add the following
+:term:`INHERIT` statement and set the :term:`BUILDHISTORY_COMMIT` variable to
+"1" at the end of your ``conf/local.conf`` file found in the
+:term:`Build Directory`::
+
+   INHERIT += "buildhistory"
+   BUILDHISTORY_COMMIT = "1"
+
+Enabling build history as
+previously described causes the OpenEmbedded build system to collect
+build output information and commit it as a single commit to a local
+:ref:`overview-manual/development-environment:git` repository.
+
+.. note::
+
+   Enabling build history increases your build times slightly,
+   particularly for images, and increases the amount of disk space used
+   during the build.
+
+You can disable build history by removing the previous statements from
+your ``conf/local.conf`` file.
+
+Understanding What the Build History Contains
+=============================================
+
+Build history information is kept in ``${``\ :term:`TOPDIR`\ ``}/buildhistory``
+in the :term:`Build Directory` as defined by the :term:`BUILDHISTORY_DIR`
+variable. Here is an example abbreviated listing:
+
+.. image:: figures/buildhistory.png
+   :align: center
+   :width: 50%
+
+At the top level, there is a ``metadata-revs`` file that lists the
+revisions of the repositories for the enabled layers when the build was
+produced. The rest of the data splits into separate ``packages``,
+``images`` and ``sdk`` directories, the contents of which are described
+as follows.
+
+Build History Package Information
+---------------------------------
+
+The history for each package contains a text file that has name-value
+pairs with information about the package. For example,
+``buildhistory/packages/i586-poky-linux/busybox/busybox/latest``
+contains the following:
+
+.. code-block:: none
+
+   PV = 1.22.1
+   PR = r32
+   RPROVIDES =
+   RDEPENDS = glibc (>= 2.20) update-alternatives-opkg
+   RRECOMMENDS = busybox-syslog busybox-udhcpc update-rc.d
+   PKGSIZE = 540168
+   FILES = /usr/bin/* /usr/sbin/* /usr/lib/busybox/* /usr/lib/lib*.so.* \
+      /etc /com /var /bin/* /sbin/* /lib/*.so.* /lib/udev/rules.d \
+      /usr/lib/udev/rules.d /usr/share/busybox /usr/lib/busybox/* \
+      /usr/share/pixmaps /usr/share/applications /usr/share/idl \
+      /usr/share/omf /usr/share/sounds /usr/lib/bonobo/servers
+   FILELIST = /bin/busybox /bin/busybox.nosuid /bin/busybox.suid /bin/sh \
+      /etc/busybox.links.nosuid /etc/busybox.links.suid
+
+Most of these
+name-value pairs correspond to variables used to produce the package.
+The exceptions are ``FILELIST``, which is the actual list of files in
+the package, and ``PKGSIZE``, which is the total size of files in the
+package in bytes.
+
+There is also a file that corresponds to the recipe from which the package
+came (e.g. ``buildhistory/packages/i586-poky-linux/busybox/latest``):
+
+.. code-block:: none
+
+   PV = 1.22.1
+   PR = r32
+   DEPENDS = initscripts kern-tools-native update-rc.d-native \
+      virtual/i586-poky-linux-compilerlibs virtual/i586-poky-linux-gcc \
+      virtual/libc virtual/update-alternatives
+   PACKAGES = busybox-ptest busybox-httpd busybox-udhcpd busybox-udhcpc \
+      busybox-syslog busybox-mdev busybox-hwclock busybox-dbg \
+      busybox-staticdev busybox-dev busybox-doc busybox-locale busybox
+
+Finally, for those recipes fetched from a version control system (e.g.,
+Git), there is a file that lists source revisions that are specified in
+the recipe and the actual revisions used during the build. Listed
+and actual revisions might differ when
+:term:`SRCREV` is set to
+${:term:`AUTOREV`}. Here is an
+example assuming
+``buildhistory/packages/qemux86-poky-linux/linux-yocto/latest_srcrev``)::
+
+   # SRCREV_machine = "38cd560d5022ed2dbd1ab0dca9642e47c98a0aa1"
+   SRCREV_machine = "38cd560d5022ed2dbd1ab0dca9642e47c98a0aa1"
+   # SRCREV_meta = "a227f20eff056e511d504b2e490f3774ab260d6f"
+   SRCREV_meta ="a227f20eff056e511d504b2e490f3774ab260d6f"
+
+You can use the
+``buildhistory-collect-srcrevs`` command with the ``-a`` option to
+collect the stored :term:`SRCREV` values from build history and report them
+in a format suitable for use in global configuration (e.g.,
+``local.conf`` or a distro include file) to override floating
+:term:`AUTOREV` values to a fixed set of revisions. Here is some example
+output from this command::
+
+   $ buildhistory-collect-srcrevs -a
+   # all-poky-linux
+   SRCREV:pn-ca-certificates = "07de54fdcc5806bde549e1edf60738c6bccf50e8"
+   SRCREV:pn-update-rc.d = "8636cf478d426b568c1be11dbd9346f67e03adac"
+   # core2-64-poky-linux
+   SRCREV:pn-binutils = "87d4632d36323091e731eb07b8aa65f90293da66"
+   SRCREV:pn-btrfs-tools = "8ad326b2f28c044cb6ed9016d7c3285e23b673c8"
+   SRCREV_bzip2-tests:pn-bzip2 = "f9061c030a25de5b6829e1abf373057309c734c0"
+   SRCREV:pn-e2fsprogs = "02540dedd3ddc52c6ae8aaa8a95ce75c3f8be1c0"
+   SRCREV:pn-file = "504206e53a89fd6eed71aeaf878aa3512418eab1"
+   SRCREV_glibc:pn-glibc = "24962427071fa532c3c48c918e9d64d719cc8a6c"
+   SRCREV:pn-gnome-desktop-testing = "e346cd4ed2e2102c9b195b614f3c642d23f5f6e7"
+   SRCREV:pn-init-system-helpers = "dbd9197569c0935029acd5c9b02b84c68fd937ee"
+   SRCREV:pn-kmod = "b6ecfc916a17eab8f93be5b09f4e4f845aabd3d1"
+   SRCREV:pn-libnsl2 = "82245c0c58add79a8e34ab0917358217a70e5100"
+   SRCREV:pn-libseccomp = "57357d2741a3b3d3e8425889a6b79a130e0fa2f3"
+   SRCREV:pn-libxcrypt = "50cf2b6dd4fdf04309445f2eec8de7051d953abf"
+   SRCREV:pn-ncurses = "51d0fd9cc3edb975f04224f29f777f8f448e8ced"
+   SRCREV:pn-procps = "19a508ea121c0c4ac6d0224575a036de745eaaf8"
+   SRCREV:pn-psmisc = "5fab6b7ab385080f1db725d6803136ec1841a15f"
+   SRCREV:pn-ptest-runner = "bcb82804daa8f725b6add259dcef2067e61a75aa"
+   SRCREV:pn-shared-mime-info = "18e558fa1c8b90b86757ade09a4ba4d6a6cf8f70"
+   SRCREV:pn-zstd = "e47e674cd09583ff0503f0f6defd6d23d8b718d3"
+   # qemux86_64-poky-linux
+   SRCREV_machine:pn-linux-yocto = "20301aeb1a64164b72bc72af58802b315e025c9c"
+   SRCREV_meta:pn-linux-yocto = "2d38a472b21ae343707c8bd64ac68a9eaca066a0"
+   # x86_64-linux
+   SRCREV:pn-binutils-cross-x86_64 = "87d4632d36323091e731eb07b8aa65f90293da66"
+   SRCREV_glibc:pn-cross-localedef-native = "24962427071fa532c3c48c918e9d64d719cc8a6c"
+   SRCREV_localedef:pn-cross-localedef-native = "794da69788cbf9bf57b59a852f9f11307663fa87"
+   SRCREV:pn-debianutils-native = "de14223e5bffe15e374a441302c528ffc1cbed57"
+   SRCREV:pn-libmodulemd-native = "ee80309bc766d781a144e6879419b29f444d94eb"
+   SRCREV:pn-virglrenderer-native = "363915595e05fb252e70d6514be2f0c0b5ca312b"
+   SRCREV:pn-zstd-native = "e47e674cd09583ff0503f0f6defd6d23d8b718d3"
+
+.. note::
+
+   Here are some notes on using the ``buildhistory-collect-srcrevs`` command:
+
+   -  By default, only values where the :term:`SRCREV` was not hardcoded
+      (usually when :term:`AUTOREV` is used) are reported. Use the ``-a``
+      option to see all :term:`SRCREV` values.
+
+   -  The output statements might not have any effect if overrides are
+      applied elsewhere in the build system configuration. Use the
+      ``-f`` option to add the ``forcevariable`` override to each output
+      line if you need to work around this restriction.
+
+   -  The script does apply special handling when building for multiple
+      machines. However, the script does place a comment before each set
+      of values that specifies which triplet to which they belong as
+      previously shown (e.g., ``i586-poky-linux``).
+
+Build History Image Information
+-------------------------------
+
+The files produced for each image are as follows:
+
+-  ``image-files:`` A directory containing selected files from the root
+   filesystem. The files are defined by
+   :term:`BUILDHISTORY_IMAGE_FILES`.
+
+-  ``build-id.txt:`` Human-readable information about the build
+   configuration and metadata source revisions. This file contains the
+   full build header as printed by BitBake.
+
+-  ``*.dot:`` Dependency graphs for the image that are compatible with
+   ``graphviz``.
+
+-  ``files-in-image.txt:`` A list of files in the image with
+   permissions, owner, group, size, and symlink information.
+
+-  ``image-info.txt:`` A text file containing name-value pairs with
+   information about the image. See the following listing example for
+   more information.
+
+-  ``installed-package-names.txt:`` A list of installed packages by name
+   only.
+
+-  ``installed-package-sizes.txt:`` A list of installed packages ordered
+   by size.
+
+-  ``installed-packages.txt:`` A list of installed packages with full
+   package filenames.
+
+.. note::
+
+   Installed package information is able to be gathered and produced
+   even if package management is disabled for the final image.
+
+Here is an example of ``image-info.txt``:
+
+.. code-block:: none
+
+   DISTRO = poky
+   DISTRO_VERSION = 3.4+snapshot-a0245d7be08f3d24ea1875e9f8872aa6bbff93be
+   USER_CLASSES = buildstats
+   IMAGE_CLASSES = qemuboot qemuboot license_image
+   IMAGE_FEATURES = debug-tweaks
+   IMAGE_LINGUAS =
+   IMAGE_INSTALL = packagegroup-core-boot speex speexdsp
+   BAD_RECOMMENDATIONS =
+   NO_RECOMMENDATIONS =
+   PACKAGE_EXCLUDE =
+   ROOTFS_POSTPROCESS_COMMAND = write_package_manifest; license_create_manifest; cve_check_write_rootfs_manifest;   ssh_allow_empty_password;  ssh_allow_root_login;  postinst_enable_logging;  rootfs_update_timestamp;   write_image_test_data;   empty_var_volatile;   sort_passwd; rootfs_reproducible;
+   IMAGE_POSTPROCESS_COMMAND =  buildhistory_get_imageinfo ;
+   IMAGESIZE = 9265
+
+Other than ``IMAGESIZE``,
+which is the total size of the files in the image in Kbytes, the
+name-value pairs are variables that may have influenced the content of
+the image. This information is often useful when you are trying to
+determine why a change in the package or file listings has occurred.
+
+Using Build History to Gather Image Information Only
+----------------------------------------------------
+
+As you can see, build history produces image information, including
+dependency graphs, so you can see why something was pulled into the
+image. If you are just interested in this information and not interested
+in collecting specific package or SDK information, you can enable
+writing only image information without any history by adding the
+following to your ``conf/local.conf`` file found in the
+:term:`Build Directory`::
+
+   INHERIT += "buildhistory"
+   BUILDHISTORY_COMMIT = "0"
+   BUILDHISTORY_FEATURES = "image"
+
+Here, you set the
+:term:`BUILDHISTORY_FEATURES`
+variable to use the image feature only.
+
+Build History SDK Information
+-----------------------------
+
+Build history collects similar information on the contents of SDKs (e.g.
+``bitbake -c populate_sdk imagename``) as compared to information it
+collects for images. Furthermore, this information differs depending on
+whether an extensible or standard SDK is being produced.
+
+The following list shows the files produced for SDKs:
+
+-  ``files-in-sdk.txt:`` A list of files in the SDK with permissions,
+   owner, group, size, and symlink information. This list includes both
+   the host and target parts of the SDK.
+
+-  ``sdk-info.txt:`` A text file containing name-value pairs with
+   information about the SDK. See the following listing example for more
+   information.
+
+-  ``sstate-task-sizes.txt:`` A text file containing name-value pairs
+   with information about task group sizes (e.g. :ref:`ref-tasks-populate_sysroot`
+   tasks have a total size). The ``sstate-task-sizes.txt`` file exists
+   only when an extensible SDK is created.
+
+-  ``sstate-package-sizes.txt:`` A text file containing name-value pairs
+   with information for the shared-state packages and sizes in the SDK.
+   The ``sstate-package-sizes.txt`` file exists only when an extensible
+   SDK is created.
+
+-  ``sdk-files:`` A folder that contains copies of the files mentioned
+   in ``BUILDHISTORY_SDK_FILES`` if the files are present in the output.
+   Additionally, the default value of ``BUILDHISTORY_SDK_FILES`` is
+   specific to the extensible SDK although you can set it differently if
+   you would like to pull in specific files from the standard SDK.
+
+   The default files are ``conf/local.conf``, ``conf/bblayers.conf``,
+   ``conf/auto.conf``, ``conf/locked-sigs.inc``, and
+   ``conf/devtool.conf``. Thus, for an extensible SDK, these files get
+   copied into the ``sdk-files`` directory.
+
+-  The following information appears under each of the ``host`` and
+   ``target`` directories for the portions of the SDK that run on the
+   host and on the target, respectively:
+
+   .. note::
+
+      The following files for the most part are empty when producing an
+      extensible SDK because this type of SDK is not constructed from
+      packages as is the standard SDK.
+
+   -  ``depends.dot:`` Dependency graph for the SDK that is compatible
+      with ``graphviz``.
+
+   -  ``installed-package-names.txt:`` A list of installed packages by
+      name only.
+
+   -  ``installed-package-sizes.txt:`` A list of installed packages
+      ordered by size.
+
+   -  ``installed-packages.txt:`` A list of installed packages with full
+      package filenames.
+
+Here is an example of ``sdk-info.txt``:
+
+.. code-block:: none
+
+   DISTRO = poky
+   DISTRO_VERSION = 1.3+snapshot-20130327
+   SDK_NAME = poky-glibc-i686-arm
+   SDK_VERSION = 1.3+snapshot
+   SDKMACHINE =
+   SDKIMAGE_FEATURES = dev-pkgs dbg-pkgs
+   BAD_RECOMMENDATIONS =
+   SDKSIZE = 352712
+
+Other than ``SDKSIZE``, which is
+the total size of the files in the SDK in Kbytes, the name-value pairs
+are variables that might have influenced the content of the SDK. This
+information is often useful when you are trying to determine why a
+change in the package or file listings has occurred.
+
+Examining Build History Information
+-----------------------------------
+
+You can examine build history output from the command line or from a web
+interface.
+
+To see any changes that have occurred (assuming you have
+:term:`BUILDHISTORY_COMMIT` = "1"),
+you can simply use any Git command that allows you to view the history
+of a repository. Here is one method::
+
+   $ git log -p
+
+You need to realize,
+however, that this method does show changes that are not significant
+(e.g. a package's size changing by a few bytes).
+
+There is a command-line tool called ``buildhistory-diff``, though,
+that queries the Git repository and prints just the differences that
+might be significant in human-readable form. Here is an example::
+
+   $ poky/poky/scripts/buildhistory-diff . HEAD^
+   Changes to images/qemux86_64/glibc/core-image-minimal (files-in-image.txt):
+      /etc/anotherpkg.conf was added
+      /sbin/anotherpkg was added
+      * (installed-package-names.txt):
+      *   anotherpkg was added
+   Changes to images/qemux86_64/glibc/core-image-minimal (installed-package-names.txt):
+      anotherpkg was added
+   packages/qemux86_64-poky-linux/v86d: PACKAGES: added "v86d-extras"
+      * PR changed from "r0" to "r1"
+      * PV changed from "0.1.10" to "0.1.12"
+   packages/qemux86_64-poky-linux/v86d/v86d: PKGSIZE changed from 110579 to 144381 (+30%)
+      * PR changed from "r0" to "r1"
+      * PV changed from "0.1.10" to "0.1.12"
+
+.. note::
+
+   The ``buildhistory-diff`` tool requires the ``GitPython``
+   package. Be sure to install it using Pip3 as follows::
+
+         $ pip3 install GitPython --user
+
+
+   Alternatively, you can install ``python3-git`` using the appropriate
+   distribution package manager (e.g. ``apt``, ``dnf``, or ``zipper``).
+
+To see changes to the build history using a web interface, follow the
+instruction in the ``README`` file
+:yocto_git:`here </buildhistory-web/>`.
+
+Here is a sample screenshot of the interface:
+
+.. image:: figures/buildhistory-web.png
+   :width: 100%
+