diff --git a/poky/documentation/dev-manual/debugging.rst b/poky/documentation/dev-manual/debugging.rst
new file mode 100644
index 0000000..9fb159e
--- /dev/null
+++ b/poky/documentation/dev-manual/debugging.rst
@@ -0,0 +1,1249 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Debugging Tools and Techniques
+******************************
+
+The exact method for debugging build failures depends on the nature of
+the problem and on the system's area from which the bug originates.
+Standard debugging practices such as comparison against the last known
+working version with examination of the changes and the re-application
+of steps to identify the one causing the problem are valid for the Yocto
+Project just as they are for any other system. Even though it is
+impossible to detail every possible potential failure, this section
+provides some general tips to aid in debugging given a variety of
+situations.
+
+.. note::
+
+   A useful feature for debugging is the error reporting tool.
+   Configuring the Yocto Project to use this tool causes the
+   OpenEmbedded build system to produce error reporting commands as part
+   of the console output. You can enter the commands after the build
+   completes to log error information into a common database, that can
+   help you figure out what might be going wrong. For information on how
+   to enable and use this feature, see the
+   ":ref:`dev-manual/error-reporting-tool:using the error reporting tool`"
+   section.
+
+The following list shows the debugging topics in the remainder of this
+section:
+
+-  ":ref:`dev-manual/debugging:viewing logs from failed tasks`" describes
+   how to find and view logs from tasks that failed during the build
+   process.
+
+-  ":ref:`dev-manual/debugging:viewing variable values`" describes how to
+   use the BitBake ``-e`` option to examine variable values after a
+   recipe has been parsed.
+
+-  ":ref:`dev-manual/debugging:viewing package information with \`\`oe-pkgdata-util\`\``"
+   describes how to use the ``oe-pkgdata-util`` utility to query
+   :term:`PKGDATA_DIR` and
+   display package-related information for built packages.
+
+-  ":ref:`dev-manual/debugging:viewing dependencies between recipes and tasks`"
+   describes how to use the BitBake ``-g`` option to display recipe
+   dependency information used during the build.
+
+-  ":ref:`dev-manual/debugging:viewing task variable dependencies`" describes
+   how to use the ``bitbake-dumpsig`` command in conjunction with key
+   subdirectories in the :term:`Build Directory` to determine variable
+   dependencies.
+
+-  ":ref:`dev-manual/debugging:running specific tasks`" describes
+   how to use several BitBake options (e.g. ``-c``, ``-C``, and ``-f``)
+   to run specific tasks in the build chain. It can be useful to run
+   tasks "out-of-order" when trying isolate build issues.
+
+-  ":ref:`dev-manual/debugging:general BitBake problems`" describes how
+   to use BitBake's ``-D`` debug output option to reveal more about what
+   BitBake is doing during the build.
+
+-  ":ref:`dev-manual/debugging:building with no dependencies`"
+   describes how to use the BitBake ``-b`` option to build a recipe
+   while ignoring dependencies.
+
+-  ":ref:`dev-manual/debugging:recipe logging mechanisms`"
+   describes how to use the many recipe logging functions to produce
+   debugging output and report errors and warnings.
+
+-  ":ref:`dev-manual/debugging:debugging parallel make races`"
+   describes how to debug situations where the build consists of several
+   parts that are run simultaneously and when the output or result of
+   one part is not ready for use with a different part of the build that
+   depends on that output.
+
+-  ":ref:`dev-manual/debugging:debugging with the gnu project debugger (gdb) remotely`"
+   describes how to use GDB to allow you to examine running programs, which can
+   help you fix problems.
+
+-  ":ref:`dev-manual/debugging:debugging with the gnu project debugger (gdb) on the target`"
+   describes how to use GDB directly on target hardware for debugging.
+
+-  ":ref:`dev-manual/debugging:other debugging tips`" describes
+   miscellaneous debugging tips that can be useful.
+
+Viewing Logs from Failed Tasks
+==============================
+
+You can find the log for a task in the file
+``${``\ :term:`WORKDIR`\ ``}/temp/log.do_``\ `taskname`.
+For example, the log for the
+:ref:`ref-tasks-compile` task of the
+QEMU minimal image for the x86 machine (``qemux86``) might be in
+``tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/temp/log.do_compile``.
+To see the commands :term:`BitBake` ran
+to generate a log, look at the corresponding ``run.do_``\ `taskname` file
+in the same directory.
+
+``log.do_``\ `taskname` and ``run.do_``\ `taskname` are actually symbolic
+links to ``log.do_``\ `taskname`\ ``.``\ `pid` and
+``log.run_``\ `taskname`\ ``.``\ `pid`, where `pid` is the PID the task had
+when it ran. The symlinks always point to the files corresponding to the
+most recent run.
+
+Viewing Variable Values
+=======================
+
+Sometimes you need to know the value of a variable as a result of
+BitBake's parsing step. This could be because some unexpected behavior
+occurred in your project. Perhaps an attempt to :ref:`modify a variable
+<bitbake:bitbake-user-manual/bitbake-user-manual-metadata:modifying existing
+variables>` did not work out as expected.
+
+BitBake's ``-e`` option is used to display variable values after
+parsing. The following command displays the variable values after the
+configuration files (i.e. ``local.conf``, ``bblayers.conf``,
+``bitbake.conf`` and so forth) have been parsed::
+
+   $ bitbake -e
+
+The following command displays variable values after a specific recipe has
+been parsed. The variables include those from the configuration as well::
+
+   $ bitbake -e recipename
+
+.. note::
+
+   Each recipe has its own private set of variables (datastore).
+   Internally, after parsing the configuration, a copy of the resulting
+   datastore is made prior to parsing each recipe. This copying implies
+   that variables set in one recipe will not be visible to other
+   recipes.
+
+   Likewise, each task within a recipe gets a private datastore based on
+   the recipe datastore, which means that variables set within one task
+   will not be visible to other tasks.
+
+In the output of ``bitbake -e``, each variable is preceded by a
+description of how the variable got its value, including temporary
+values that were later overridden. This description also includes
+variable flags (varflags) set on the variable. The output can be very
+helpful during debugging.
+
+Variables that are exported to the environment are preceded by
+``export`` in the output of ``bitbake -e``. See the following example::
+
+   export CC="i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/ulf/poky/build/tmp/sysroots/qemux86"
+
+In addition to variable values, the output of the ``bitbake -e`` and
+``bitbake -e`` recipe commands includes the following information:
+
+-  The output starts with a tree listing all configuration files and
+   classes included globally, recursively listing the files they include
+   or inherit in turn. Much of the behavior of the OpenEmbedded build
+   system (including the behavior of the :ref:`ref-manual/tasks:normal recipe build tasks`) is
+   implemented in the :ref:`ref-classes-base` class and the
+   classes it inherits, rather than being built into BitBake itself.
+
+-  After the variable values, all functions appear in the output. For
+   shell functions, variables referenced within the function body are
+   expanded. If a function has been modified using overrides or using
+   override-style operators like ``:append`` and ``:prepend``, then the
+   final assembled function body appears in the output.
+
+Viewing Package Information with ``oe-pkgdata-util``
+====================================================
+
+You can use the ``oe-pkgdata-util`` command-line utility to query
+:term:`PKGDATA_DIR` and display
+various package-related information. When you use the utility, you must
+use it to view information on packages that have already been built.
+
+Following are a few of the available ``oe-pkgdata-util`` subcommands.
+
+.. note::
+
+   You can use the standard \* and ? globbing wildcards as part of
+   package names and paths.
+
+-  ``oe-pkgdata-util list-pkgs [pattern]``: Lists all packages
+   that have been built, optionally limiting the match to packages that
+   match pattern.
+
+-  ``oe-pkgdata-util list-pkg-files package ...``: Lists the
+   files and directories contained in the given packages.
+
+   .. note::
+
+      A different way to view the contents of a package is to look at
+      the
+      ``${``\ :term:`WORKDIR`\ ``}/packages-split``
+      directory of the recipe that generates the package. This directory
+      is created by the
+      :ref:`ref-tasks-package` task
+      and has one subdirectory for each package the recipe generates,
+      which contains the files stored in that package.
+
+      If you want to inspect the ``${WORKDIR}/packages-split``
+      directory, make sure that :ref:`ref-classes-rm-work` is not
+      enabled when you build the recipe.
+
+-  ``oe-pkgdata-util find-path path ...``: Lists the names of
+   the packages that contain the given paths. For example, the following
+   tells us that ``/usr/share/man/man1/make.1`` is contained in the
+   ``make-doc`` package::
+
+      $ oe-pkgdata-util find-path /usr/share/man/man1/make.1
+      make-doc: /usr/share/man/man1/make.1
+
+-  ``oe-pkgdata-util lookup-recipe package ...``: Lists the name
+   of the recipes that produce the given packages.
+
+For more information on the ``oe-pkgdata-util`` command, use the help
+facility::
+
+   $ oe-pkgdata-util --help
+   $ oe-pkgdata-util subcommand --help
+
+Viewing Dependencies Between Recipes and Tasks
+==============================================
+
+Sometimes it can be hard to see why BitBake wants to build other recipes
+before the one you have specified. Dependency information can help you
+understand why a recipe is built.
+
+To generate dependency information for a recipe, run the following
+command::
+
+   $ bitbake -g recipename
+
+This command writes the following files in the current directory:
+
+-  ``pn-buildlist``: A list of recipes/targets involved in building
+   `recipename`. "Involved" here means that at least one task from the
+   recipe needs to run when building `recipename` from scratch. Targets
+   that are in
+   :term:`ASSUME_PROVIDED`
+   are not listed.
+
+-  ``task-depends.dot``: A graph showing dependencies between tasks.
+
+The graphs are in :wikipedia:`DOT <DOT_%28graph_description_language%29>`
+format and can be converted to images (e.g. using the ``dot`` tool from
+`Graphviz <https://www.graphviz.org/>`__).
+
+.. note::
+
+   -  DOT files use a plain text format. The graphs generated using the
+      ``bitbake -g`` command are often so large as to be difficult to
+      read without special pruning (e.g. with BitBake's ``-I`` option)
+      and processing. Despite the form and size of the graphs, the
+      corresponding ``.dot`` files can still be possible to read and
+      provide useful information.
+
+      As an example, the ``task-depends.dot`` file contains lines such
+      as the following::
+
+         "libxslt.do_configure" -> "libxml2.do_populate_sysroot"
+
+      The above example line reveals that the
+      :ref:`ref-tasks-configure`
+      task in ``libxslt`` depends on the
+      :ref:`ref-tasks-populate_sysroot`
+      task in ``libxml2``, which is a normal
+      :term:`DEPENDS` dependency
+      between the two recipes.
+
+   -  For an example of how ``.dot`` files can be processed, see the
+      ``scripts/contrib/graph-tool`` Python script, which finds and
+      displays paths between graph nodes.
+
+You can use a different method to view dependency information by using
+the following command::
+
+   $ bitbake -g -u taskexp recipename
+
+This command
+displays a GUI window from which you can view build-time and runtime
+dependencies for the recipes involved in building recipename.
+
+Viewing Task Variable Dependencies
+==================================
+
+As mentioned in the
+":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-execution:checksums (signatures)`" section of the BitBake
+User Manual, BitBake tries to automatically determine what variables a
+task depends on so that it can rerun the task if any values of the
+variables change. This determination is usually reliable. However, if
+you do things like construct variable names at runtime, then you might
+have to manually declare dependencies on those variables using
+``vardeps`` as described in the
+":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags`" section of the BitBake
+User Manual.
+
+If you are unsure whether a variable dependency is being picked up
+automatically for a given task, you can list the variable dependencies
+BitBake has determined by doing the following:
+
+#. Build the recipe containing the task::
+
+   $ bitbake recipename
+
+#. Inside the :term:`STAMPS_DIR`
+   directory, find the signature data (``sigdata``) file that
+   corresponds to the task. The ``sigdata`` files contain a pickled
+   Python database of all the metadata that went into creating the input
+   checksum for the task. As an example, for the
+   :ref:`ref-tasks-fetch` task of the
+   ``db`` recipe, the ``sigdata`` file might be found in the following
+   location::
+
+      ${BUILDDIR}/tmp/stamps/i586-poky-linux/db/6.0.30-r1.do_fetch.sigdata.7c048c18222b16ff0bcee2000ef648b1
+
+   For tasks that are accelerated through the shared state
+   (:ref:`sstate <overview-manual/concepts:shared state cache>`) cache, an
+   additional ``siginfo`` file is written into
+   :term:`SSTATE_DIR` along with
+   the cached task output. The ``siginfo`` files contain exactly the
+   same information as ``sigdata`` files.
+
+#. Run ``bitbake-dumpsig`` on the ``sigdata`` or ``siginfo`` file. Here
+   is an example::
+
+      $ bitbake-dumpsig ${BUILDDIR}/tmp/stamps/i586-poky-linux/db/6.0.30-r1.do_fetch.sigdata.7c048c18222b16ff0bcee2000ef648b1
+
+   In the output of the above command, you will find a line like the
+   following, which lists all the (inferred) variable dependencies for
+   the task. This list also includes indirect dependencies from
+   variables depending on other variables, recursively::
+
+      Task dependencies: ['PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
+
+   .. note::
+
+      Functions (e.g. ``base_do_fetch``) also count as variable dependencies.
+      These functions in turn depend on the variables they reference.
+
+   The output of ``bitbake-dumpsig`` also includes the value each
+   variable had, a list of dependencies for each variable, and
+   :term:`BB_BASEHASH_IGNORE_VARS`
+   information.
+
+There is also a ``bitbake-diffsigs`` command for comparing two
+``siginfo`` or ``sigdata`` files. This command can be helpful when
+trying to figure out what changed between two versions of a task. If you
+call ``bitbake-diffsigs`` with just one file, the command behaves like
+``bitbake-dumpsig``.
+
+You can also use BitBake to dump out the signature construction
+information without executing tasks by using either of the following
+BitBake command-line options::
+
+   ‐‐dump-signatures=SIGNATURE_HANDLER
+   -S SIGNATURE_HANDLER
+
+
+.. note::
+
+   Two common values for `SIGNATURE_HANDLER` are "none" and "printdiff", which
+   dump only the signature or compare the dumped signature with the cached one,
+   respectively.
+
+Using BitBake with either of these options causes BitBake to dump out
+``sigdata`` files in the ``stamps`` directory for every task it would
+have executed instead of building the specified target package.
+
+Viewing Metadata Used to Create the Input Signature of a Shared State Task
+==========================================================================
+
+Seeing what metadata went into creating the input signature of a shared
+state (sstate) task can be a useful debugging aid. This information is
+available in signature information (``siginfo``) files in
+:term:`SSTATE_DIR`. For
+information on how to view and interpret information in ``siginfo``
+files, see the
+":ref:`dev-manual/debugging:viewing task variable dependencies`" section.
+
+For conceptual information on shared state, see the
+":ref:`overview-manual/concepts:shared state`"
+section in the Yocto Project Overview and Concepts Manual.
+
+Invalidating Shared State to Force a Task to Run
+================================================
+
+The OpenEmbedded build system uses
+:ref:`checksums <overview-manual/concepts:checksums (signatures)>` and
+:ref:`overview-manual/concepts:shared state` cache to avoid unnecessarily
+rebuilding tasks. Collectively, this scheme is known as "shared state
+code".
+
+As with all schemes, this one has some drawbacks. It is possible that
+you could make implicit changes to your code that the checksum
+calculations do not take into account. These implicit changes affect a
+task's output but do not trigger the shared state code into rebuilding a
+recipe. Consider an example during which a tool changes its output.
+Assume that the output of ``rpmdeps`` changes. The result of the change
+should be that all the ``package`` and ``package_write_rpm`` shared
+state cache items become invalid. However, because the change to the
+output is external to the code and therefore implicit, the associated
+shared state cache items do not become invalidated. In this case, the
+build process uses the cached items rather than running the task again.
+Obviously, these types of implicit changes can cause problems.
+
+To avoid these problems during the build, you need to understand the
+effects of any changes you make. Realize that changes you make directly
+to a function are automatically factored into the checksum calculation.
+Thus, these explicit changes invalidate the associated area of shared
+state cache. However, you need to be aware of any implicit changes that
+are not obvious changes to the code and could affect the output of a
+given task.
+
+When you identify an implicit change, you can easily take steps to
+invalidate the cache and force the tasks to run. The steps you can take
+are as simple as changing a function's comments in the source code. For
+example, to invalidate package shared state files, change the comment
+statements of
+:ref:`ref-tasks-package` or the
+comments of one of the functions it calls. Even though the change is
+purely cosmetic, it causes the checksum to be recalculated and forces
+the build system to run the task again.
+
+.. note::
+
+   For an example of a commit that makes a cosmetic change to invalidate
+   shared state, see this
+   :yocto_git:`commit </poky/commit/meta/classes/package.bbclass?id=737f8bbb4f27b4837047cb9b4fbfe01dfde36d54>`.
+
+Running Specific Tasks
+======================
+
+Any given recipe consists of a set of tasks. The standard BitBake
+behavior in most cases is: :ref:`ref-tasks-fetch`, :ref:`ref-tasks-unpack`, :ref:`ref-tasks-patch`,
+:ref:`ref-tasks-configure`, :ref:`ref-tasks-compile`, :ref:`ref-tasks-install`, :ref:`ref-tasks-package`,
+:ref:`do_package_write_* <ref-tasks-package_write_deb>`, and :ref:`ref-tasks-build`. The default task is
+:ref:`ref-tasks-build` and any tasks on which it depends build first. Some tasks,
+such as :ref:`ref-tasks-devshell`, are not part of the default build chain. If you
+wish to run a task that is not part of the default build chain, you can
+use the ``-c`` option in BitBake. Here is an example::
+
+   $ bitbake matchbox-desktop -c devshell
+
+The ``-c`` option respects task dependencies, which means that all other
+tasks (including tasks from other recipes) that the specified task
+depends on will be run before the task. Even when you manually specify a
+task to run with ``-c``, BitBake will only run the task if it considers
+it "out of date". See the
+":ref:`overview-manual/concepts:stamp files and the rerunning of tasks`"
+section in the Yocto Project Overview and Concepts Manual for how
+BitBake determines whether a task is "out of date".
+
+If you want to force an up-to-date task to be rerun (e.g. because you
+made manual modifications to the recipe's
+:term:`WORKDIR` that you want to try
+out), then you can use the ``-f`` option.
+
+.. note::
+
+   The reason ``-f`` is never required when running the
+   :ref:`ref-tasks-devshell` task is because the
+   [\ :ref:`nostamp <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:variable flags>`\ ]
+   variable flag is already set for the task.
+
+The following example shows one way you can use the ``-f`` option::
+
+   $ bitbake matchbox-desktop
+             .
+             .
+   make some changes to the source code in the work directory
+             .
+             .
+   $ bitbake matchbox-desktop -c compile -f
+   $ bitbake matchbox-desktop
+
+This sequence first builds and then recompiles ``matchbox-desktop``. The
+last command reruns all tasks (basically the packaging tasks) after the
+compile. BitBake recognizes that the :ref:`ref-tasks-compile` task was rerun and
+therefore understands that the other tasks also need to be run again.
+
+Another, shorter way to rerun a task and all
+:ref:`ref-manual/tasks:normal recipe build tasks`
+that depend on it is to use the ``-C`` option.
+
+.. note::
+
+   This option is upper-cased and is separate from the ``-c``
+   option, which is lower-cased.
+
+Using this option invalidates the given task and then runs the
+:ref:`ref-tasks-build` task, which is
+the default task if no task is given, and the tasks on which it depends.
+You could replace the final two commands in the previous example with
+the following single command::
+
+   $ bitbake matchbox-desktop -C compile
+
+Internally, the ``-f`` and ``-C`` options work by tainting (modifying)
+the input checksum of the specified task. This tainting indirectly
+causes the task and its dependent tasks to be rerun through the normal
+task dependency mechanisms.
+
+.. note::
+
+   BitBake explicitly keeps track of which tasks have been tainted in
+   this fashion, and will print warnings such as the following for
+   builds involving such tasks:
+
+   .. code-block:: none
+
+      WARNING: /home/ulf/poky/meta/recipes-sato/matchbox-desktop/matchbox-desktop_2.1.bb.do_compile is tainted from a forced run
+
+
+   The purpose of the warning is to let you know that the work directory
+   and build output might not be in the clean state they would be in for
+   a "normal" build, depending on what actions you took. To get rid of
+   such warnings, you can remove the work directory and rebuild the
+   recipe, as follows::
+
+      $ bitbake matchbox-desktop -c clean
+      $ bitbake matchbox-desktop
+
+
+You can view a list of tasks in a given package by running the
+:ref:`ref-tasks-listtasks` task as follows::
+
+   $ bitbake matchbox-desktop -c listtasks
+
+The results appear as output to the console and are also in
+the file ``${WORKDIR}/temp/log.do_listtasks``.
+
+General BitBake Problems
+========================
+
+You can see debug output from BitBake by using the ``-D`` option. The
+debug output gives more information about what BitBake is doing and the
+reason behind it. Each ``-D`` option you use increases the logging
+level. The most common usage is ``-DDD``.
+
+The output from ``bitbake -DDD -v targetname`` can reveal why BitBake
+chose a certain version of a package or why BitBake picked a certain
+provider. This command could also help you in a situation where you
+think BitBake did something unexpected.
+
+Building with No Dependencies
+=============================
+
+To build a specific recipe (``.bb`` file), you can use the following
+command form::
+
+   $ bitbake -b somepath/somerecipe.bb
+
+This command form does
+not check for dependencies. Consequently, you should use it only when
+you know existing dependencies have been met.
+
+.. note::
+
+   You can also specify fragments of the filename. In this case, BitBake
+   checks for a unique match.
+
+Recipe Logging Mechanisms
+=========================
+
+The Yocto Project provides several logging functions for producing
+debugging output and reporting errors and warnings. For Python
+functions, the following logging functions are available. All of these functions
+log to ``${T}/log.do_``\ `task`, and can also log to standard output
+(stdout) with the right settings:
+
+-  ``bb.plain(msg)``: Writes msg as is to the log while also
+   logging to stdout.
+
+-  ``bb.note(msg)``: Writes "NOTE: msg" to the log. Also logs to
+   stdout if BitBake is called with "-v".
+
+-  ``bb.debug(level, msg)``: Writes "DEBUG: msg" to the
+   log. Also logs to stdout if the log level is greater than or equal to
+   level. See the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-intro:usage and syntax`" option
+   in the BitBake User Manual for more information.
+
+-  ``bb.warn(msg)``: Writes "WARNING: msg" to the log while also
+   logging to stdout.
+
+-  ``bb.error(msg)``: Writes "ERROR: msg" to the log while also
+   logging to standard out (stdout).
+
+   .. note::
+
+      Calling this function does not cause the task to fail.
+
+-  ``bb.fatal(msg)``: This logging function is similar to
+   ``bb.error(msg)`` but also causes the calling task to fail.
+
+   .. note::
+
+      ``bb.fatal()`` raises an exception, which means you do not need to put a
+      "return" statement after the function.
+
+The same logging functions are also available in shell functions, under
+the names ``bbplain``, ``bbnote``, ``bbdebug``, ``bbwarn``, ``bberror``,
+and ``bbfatal``. The :ref:`ref-classes-logging` class
+implements these functions. See that class in the ``meta/classes``
+folder of the :term:`Source Directory` for information.
+
+Logging With Python
+-------------------
+
+When creating recipes using Python and inserting code that handles build
+logs, keep in mind the goal is to have informative logs while keeping
+the console as "silent" as possible. Also, if you want status messages
+in the log, use the "debug" loglevel.
+
+Following is an example written in Python. The code handles logging for
+a function that determines the number of tasks needed to be run. See the
+":ref:`ref-tasks-listtasks`"
+section for additional information::
+
+   python do_listtasks() {
+       bb.debug(2, "Starting to figure out the task list")
+       if noteworthy_condition:
+           bb.note("There are 47 tasks to run")
+       bb.debug(2, "Got to point xyz")
+       if warning_trigger:
+           bb.warn("Detected warning_trigger, this might be a problem later.")
+       if recoverable_error:
+           bb.error("Hit recoverable_error, you really need to fix this!")
+       if fatal_error:
+           bb.fatal("fatal_error detected, unable to print the task list")
+       bb.plain("The tasks present are abc")
+       bb.debug(2, "Finished figuring out the tasklist")
+   }
+
+Logging With Bash
+-----------------
+
+When creating recipes using Bash and inserting code that handles build
+logs, you have the same goals --- informative with minimal console output.
+The syntax you use for recipes written in Bash is similar to that of
+recipes written in Python described in the previous section.
+
+Following is an example written in Bash. The code logs the progress of
+the ``do_my_function`` function::
+
+   do_my_function() {
+       bbdebug 2 "Running do_my_function"
+       if [ exceptional_condition ]; then
+           bbnote "Hit exceptional_condition"
+       fi
+       bbdebug 2  "Got to point xyz"
+       if [ warning_trigger ]; then
+           bbwarn "Detected warning_trigger, this might cause a problem later."
+       fi
+       if [ recoverable_error ]; then
+           bberror "Hit recoverable_error, correcting"
+       fi
+       if [ fatal_error ]; then
+           bbfatal "fatal_error detected"
+       fi
+       bbdebug 2 "Completed do_my_function"
+   }
+
+
+Debugging Parallel Make Races
+=============================
+
+A parallel ``make`` race occurs when the build consists of several parts
+that are run simultaneously and a situation occurs when the output or
+result of one part is not ready for use with a different part of the
+build that depends on that output. Parallel make races are annoying and
+can sometimes be difficult to reproduce and fix. However, there are some simple
+tips and tricks that can help you debug and fix them. This section
+presents a real-world example of an error encountered on the Yocto
+Project autobuilder and the process used to fix it.
+
+.. note::
+
+   If you cannot properly fix a ``make`` race condition, you can work around it
+   by clearing either the :term:`PARALLEL_MAKE` or :term:`PARALLEL_MAKEINST`
+   variables.
+
+The Failure
+-----------
+
+For this example, assume that you are building an image that depends on
+the "neard" package. And, during the build, BitBake runs into problems
+and creates the following output.
+
+.. note::
+
+   This example log file has longer lines artificially broken to make
+   the listing easier to read.
+
+If you examine the output or the log file, you see the failure during
+``make``:
+
+.. code-block:: none
+
+   | DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common']
+   | DEBUG: Executing shell function do_compile
+   | NOTE: make -j 16
+   | make --no-print-directory all-am
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/types.h include/near/types.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/log.h include/near/log.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/plugin.h include/near/plugin.h
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/tag.h include/near/tag.h
+   | /bin/mkdir -p include/near
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/adapter.h include/near/adapter.h
+   | /bin/mkdir -p include/near
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/ndef.h include/near/ndef.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/tlv.h include/near/tlv.h
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/setting.h include/near/setting.h
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | /bin/mkdir -p include/near
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/device.h include/near/device.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/nfc_copy.h include/near/nfc_copy.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/snep.h include/near/snep.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/version.h include/near/version.h
+   | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+     0.14-r0/neard-0.14/include/dbus.h include/near/dbus.h
+   | ./src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h
+   | i586-poky-linux-gcc  -m32 -march=i586 --sysroot=/home/pokybuild/yocto-autobuilder/nightly-x86/
+     build/build/tmp/sysroots/qemux86 -DHAVE_CONFIG_H -I. -I./include -I./src -I./gdbus  -I/home/pokybuild/
+     yocto-autobuilder/nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/glib-2.0
+     -I/home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/sysroots/qemux86/usr/
+     lib/glib-2.0/include  -I/home/pokybuild/yocto-autobuilder/nightly-x86/build/build/
+     tmp/sysroots/qemux86/usr/include/dbus-1.0 -I/home/pokybuild/yocto-autobuilder/
+     nightly-x86/build/build/tmp/sysroots/qemux86/usr/lib/dbus-1.0/include  -I/home/pokybuild/yocto-autobuilder/
+     nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/libnl3
+     -DNEAR_PLUGIN_BUILTIN -DPLUGINDIR=\""/usr/lib/near/plugins"\"
+     -DCONFIGDIR=\""/etc/neard\"" -O2 -pipe -g -feliminate-unused-debug-types -c
+     -o tools/snep-send.o tools/snep-send.c
+   | In file included from tools/snep-send.c:16:0:
+   | tools/../src/near.h:41:23: fatal error: near/dbus.h: No such file or directory
+   |  #include <near/dbus.h>
+   |                        ^
+   | compilation terminated.
+   | make[1]: *** [tools/snep-send.o] Error 1
+   | make[1]: *** Waiting for unfinished jobs....
+   | make: *** [all] Error 2
+   | ERROR: oe_runmake failed
+
+Reproducing the Error
+---------------------
+
+Because race conditions are intermittent, they do not manifest
+themselves every time you do the build. In fact, most times the build
+will complete without problems even though the potential race condition
+exists. Thus, once the error surfaces, you need a way to reproduce it.
+
+In this example, compiling the "neard" package is causing the problem.
+So the first thing to do is build "neard" locally. Before you start the
+build, set the
+:term:`PARALLEL_MAKE` variable
+in your ``local.conf`` file to a high number (e.g. "-j 20"). Using a
+high value for :term:`PARALLEL_MAKE` increases the chances of the race
+condition showing up::
+
+   $ bitbake neard
+
+Once the local build for "neard" completes, start a ``devshell`` build::
+
+   $ bitbake neard -c devshell
+
+For information on how to use a ``devshell``, see the
+":ref:`dev-manual/development-shell:using a development shell`" section.
+
+In the ``devshell``, do the following::
+
+   $ make clean
+   $ make tools/snep-send.o
+
+The ``devshell`` commands cause the failure to clearly
+be visible. In this case, there is a missing dependency for the ``neard``
+Makefile target. Here is some abbreviated, sample output with the
+missing dependency clearly visible at the end::
+
+   i586-poky-linux-gcc  -m32 -march=i586 --sysroot=/home/scott-lenovo/......
+      .
+      .
+      .
+   tools/snep-send.c
+   In file included from tools/snep-send.c:16:0:
+   tools/../src/near.h:41:23: fatal error: near/dbus.h: No such file or directory
+    #include <near/dbus.h>
+                     ^
+   compilation terminated.
+   make: *** [tools/snep-send.o] Error 1
+   $
+
+
+Creating a Patch for the Fix
+----------------------------
+
+Because there is a missing dependency for the Makefile target, you need
+to patch the ``Makefile.am`` file, which is generated from
+``Makefile.in``. You can use Quilt to create the patch::
+
+   $ quilt new parallelmake.patch
+   Patch patches/parallelmake.patch is now on top
+   $ quilt add Makefile.am
+   File Makefile.am added to patch patches/parallelmake.patch
+
+For more information on using Quilt, see the
+":ref:`dev-manual/quilt:using quilt in your workflow`" section.
+
+At this point you need to make the edits to ``Makefile.am`` to add the
+missing dependency. For our example, you have to add the following line
+to the file::
+
+   tools/snep-send.$(OBJEXT): include/near/dbus.h
+
+Once you have edited the file, use the ``refresh`` command to create the
+patch::
+
+   $ quilt refresh
+   Refreshed patch patches/parallelmake.patch
+
+Once the patch file is created, you need to add it back to the originating
+recipe folder. Here is an example assuming a top-level
+:term:`Source Directory` named ``poky``::
+
+   $ cp patches/parallelmake.patch poky/meta/recipes-connectivity/neard/neard
+
+The final thing you need to do to implement the fix in the build is to
+update the "neard" recipe (i.e. ``neard-0.14.bb``) so that the
+:term:`SRC_URI` statement includes
+the patch file. The recipe file is in the folder above the patch. Here
+is what the edited :term:`SRC_URI` statement would look like::
+
+   SRC_URI = "${KERNELORG_MIRROR}/linux/network/nfc/${BPN}-${PV}.tar.xz \
+              file://neard.in \
+              file://neard.service.in \
+              file://parallelmake.patch \
+             "
+
+With the patch complete and moved to the correct folder and the
+:term:`SRC_URI` statement updated, you can exit the ``devshell``::
+
+   $ exit
+
+Testing the Build
+-----------------
+
+With everything in place, you can get back to trying the build again
+locally::
+
+   $ bitbake neard
+
+This build should succeed.
+
+Now you can open up a ``devshell`` again and repeat the clean and make
+operations as follows::
+
+   $ bitbake neard -c devshell
+   $ make clean
+   $ make tools/snep-send.o
+
+The build should work without issue.
+
+As with all solved problems, if they originated upstream, you need to
+submit the fix for the recipe in OE-Core and upstream so that the
+problem is taken care of at its source. See the
+":ref:`dev-manual/changes:submitting a change to the yocto project`"
+section for more information.
+
+Debugging With the GNU Project Debugger (GDB) Remotely
+======================================================
+
+GDB allows you to examine running programs, which in turn helps you to
+understand and fix problems. It also allows you to perform post-mortem
+style analysis of program crashes. GDB is available as a package within
+the Yocto Project and is installed in SDK images by default. See the
+":ref:`ref-manual/images:Images`" chapter in the Yocto
+Project Reference Manual for a description of these images. You can find
+information on GDB at https://sourceware.org/gdb/.
+
+.. note::
+
+   For best results, install debug (``-dbg``) packages for the applications you
+   are going to debug. Doing so makes extra debug symbols available that give
+   you more meaningful output.
+
+Sometimes, due to memory or disk space constraints, it is not possible
+to use GDB directly on the remote target to debug applications. These
+constraints arise because GDB needs to load the debugging information
+and the binaries of the process being debugged. Additionally, GDB needs
+to perform many computations to locate information such as function
+names, variable names and values, stack traces and so forth --- even
+before starting the debugging process. These extra computations place
+more load on the target system and can alter the characteristics of the
+program being debugged.
+
+To help get past the previously mentioned constraints, there are two
+methods you can use: running a debuginfod server and using gdbserver.
+
+Using the debuginfod server method
+----------------------------------
+
+``debuginfod`` from ``elfutils`` is a way to distribute ``debuginfo`` files.
+Running a ``debuginfod`` server makes debug symbols readily available,
+which means you don't need to download debugging information
+and the binaries of the process being debugged. You can just fetch
+debug symbols from the server.
+
+To run a ``debuginfod`` server, you need to do the following:
+
+-  Ensure that ``debuginfod`` is present in :term:`DISTRO_FEATURES`
+   (it already is in ``OpenEmbedded-core`` defaults and ``poky`` reference distribution).
+   If not, set in your distro config file or in ``local.conf``::
+
+      DISTRO_FEATURES:append = " debuginfod"
+
+   This distro feature enables the server and client library in ``elfutils``,
+   and enables ``debuginfod`` support in clients (at the moment, ``gdb`` and ``binutils``).
+
+-  Run the following commands to launch the ``debuginfod`` server on the host::
+
+      $ oe-debuginfod
+
+-  To use ``debuginfod`` on the target, you need to know the ip:port where
+   ``debuginfod`` is listening on the host (port defaults to 8002), and export
+   that into the shell environment, for example in ``qemu``::
+
+      root@qemux86-64:~# export DEBUGINFOD_URLS="http://192.168.7.1:8002/"
+
+-  Then debug info fetching should simply work when running the target ``gdb``,
+   ``readelf`` or ``objdump``, for example::
+
+      root@qemux86-64:~# gdb /bin/cat
+      ...
+      Reading symbols from /bin/cat...
+      Downloading separate debug info for /bin/cat...
+      Reading symbols from /home/root/.cache/debuginfod_client/923dc4780cfbc545850c616bffa884b6b5eaf322/debuginfo...
+
+-  It's also possible to use ``debuginfod-find`` to just query the server::
+
+      root@qemux86-64:~# debuginfod-find debuginfo /bin/ls
+      /home/root/.cache/debuginfod_client/356edc585f7f82d46f94fcb87a86a3fe2d2e60bd/debuginfo
+
+
+Using the gdbserver method
+--------------------------
+
+gdbserver, which runs on the remote target and does not load any
+debugging information from the debugged process. Instead, a GDB instance
+processes the debugging information that is run on a remote computer -
+the host GDB. The host GDB then sends control commands to gdbserver to
+make it stop or start the debugged program, as well as read or write
+memory regions of that debugged program. All the debugging information
+loaded and processed as well as all the heavy debugging is done by the
+host GDB. Offloading these processes gives the gdbserver running on the
+target a chance to remain small and fast.
+
+Because the host GDB is responsible for loading the debugging
+information and for doing the necessary processing to make actual
+debugging happen, you have to make sure the host can access the
+unstripped binaries complete with their debugging information and also
+be sure the target is compiled with no optimizations. The host GDB must
+also have local access to all the libraries used by the debugged
+program. Because gdbserver does not need any local debugging
+information, the binaries on the remote target can remain stripped.
+However, the binaries must also be compiled without optimization so they
+match the host's binaries.
+
+To remain consistent with GDB documentation and terminology, the binary
+being debugged on the remote target machine is referred to as the
+"inferior" binary. For documentation on GDB see the `GDB
+site <https://sourceware.org/gdb/documentation/>`__.
+
+The following steps show you how to debug using the GNU project
+debugger.
+
+#. *Configure your build system to construct the companion debug
+   filesystem:*
+
+   In your ``local.conf`` file, set the following::
+
+      IMAGE_GEN_DEBUGFS = "1"
+      IMAGE_FSTYPES_DEBUGFS = "tar.bz2"
+
+   These options cause the
+   OpenEmbedded build system to generate a special companion filesystem
+   fragment, which contains the matching source and debug symbols to
+   your deployable filesystem. The build system does this by looking at
+   what is in the deployed filesystem, and pulling the corresponding
+   ``-dbg`` packages.
+
+   The companion debug filesystem is not a complete filesystem, but only
+   contains the debug fragments. This filesystem must be combined with
+   the full filesystem for debugging. Subsequent steps in this procedure
+   show how to combine the partial filesystem with the full filesystem.
+
+#. *Configure the system to include gdbserver in the target filesystem:*
+
+   Make the following addition in your ``local.conf`` file::
+
+      EXTRA_IMAGE_FEATURES:append = " tools-debug"
+
+   The change makes
+   sure the ``gdbserver`` package is included.
+
+#. *Build the environment:*
+
+   Use the following command to construct the image and the companion
+   Debug Filesystem::
+
+      $ bitbake image
+
+   Build the cross GDB component and
+   make it available for debugging. Build the SDK that matches the
+   image. Building the SDK is best for a production build that can be
+   used later for debugging, especially during long term maintenance::
+
+      $ bitbake -c populate_sdk image
+
+   Alternatively, you can build the minimal toolchain components that
+   match the target. Doing so creates a smaller than typical SDK and
+   only contains a minimal set of components with which to build simple
+   test applications, as well as run the debugger::
+
+      $ bitbake meta-toolchain
+
+   A final method is to build Gdb itself within the build system::
+
+      $ bitbake gdb-cross-<architecture>
+
+   Doing so produces a temporary copy of
+   ``cross-gdb`` you can use for debugging during development. While
+   this is the quickest approach, the two previous methods in this step
+   are better when considering long-term maintenance strategies.
+
+   .. note::
+
+      If you run ``bitbake gdb-cross``, the OpenEmbedded build system suggests
+      the actual image (e.g. ``gdb-cross-i586``). The suggestion is usually the
+      actual name you want to use.
+
+#. *Set up the* ``debugfs``\ *:*
+
+   Run the following commands to set up the ``debugfs``::
+
+      $ mkdir debugfs
+      $ cd debugfs
+      $ tar xvfj build-dir/tmp/deploy/images/machine/image.rootfs.tar.bz2
+      $ tar xvfj build-dir/tmp/deploy/images/machine/image-dbg.rootfs.tar.bz2
+
+#. *Set up GDB:*
+
+   Install the SDK (if you built one) and then source the correct
+   environment file. Sourcing the environment file puts the SDK in your
+   ``PATH`` environment variable and sets ``$GDB`` to the SDK's debugger.
+
+   If you are using the build system, Gdb is located in
+   `build-dir`\ ``/tmp/sysroots/``\ `host`\ ``/usr/bin/``\ `architecture`\ ``/``\ `architecture`\ ``-gdb``
+
+#. *Boot the target:*
+
+   For information on how to run QEMU, see the `QEMU
+   Documentation <https://wiki.qemu.org/Documentation/GettingStartedDevelopers>`__.
+
+   .. note::
+
+      Be sure to verify that your host can access the target via TCP.
+
+#. *Debug a program:*
+
+   Debugging a program involves running gdbserver on the target and then
+   running Gdb on the host. The example in this step debugs ``gzip``:
+
+   .. code-block:: shell
+
+      root@qemux86:~# gdbserver localhost:1234 /bin/gzip —help
+
+   For
+   additional gdbserver options, see the `GDB Server
+   Documentation <https://www.gnu.org/software/gdb/documentation/>`__.
+
+   After running gdbserver on the target, you need to run Gdb on the
+   host and configure it and connect to the target. Use these commands::
+
+      $ cd directory-holding-the-debugfs-directory
+      $ arch-gdb
+      (gdb) set sysroot debugfs
+      (gdb) set substitute-path /usr/src/debug debugfs/usr/src/debug
+      (gdb) target remote IP-of-target:1234
+
+   At this
+   point, everything should automatically load (i.e. matching binaries,
+   symbols and headers).
+
+   .. note::
+
+      The Gdb ``set`` commands in the previous example can be placed into the
+      users ``~/.gdbinit`` file. Upon starting, Gdb automatically runs whatever
+      commands are in that file.
+
+#. *Deploying without a full image rebuild:*
+
+   In many cases, during development you want a quick method to deploy a
+   new binary to the target and debug it, without waiting for a full
+   image build.
+
+   One approach to solving this situation is to just build the component
+   you want to debug. Once you have built the component, copy the
+   executable directly to both the target and the host ``debugfs``.
+
+   If the binary is processed through the debug splitting in
+   OpenEmbedded, you should also copy the debug items (i.e. ``.debug``
+   contents and corresponding ``/usr/src/debug`` files) from the work
+   directory. Here is an example::
+
+      $ bitbake bash
+      $ bitbake -c devshell bash
+      $ cd ..
+      $ scp packages-split/bash/bin/bash target:/bin/bash
+      $ cp -a packages-split/bash-dbg/\* path/debugfs
+
+Debugging with the GNU Project Debugger (GDB) on the Target
+===========================================================
+
+The previous section addressed using GDB remotely for debugging
+purposes, which is the most usual case due to the inherent hardware
+limitations on many embedded devices. However, debugging in the target
+hardware itself is also possible with more powerful devices. This
+section describes what you need to do in order to support using GDB to
+debug on the target hardware.
+
+To support this kind of debugging, you need do the following:
+
+-  Ensure that GDB is on the target. You can do this by making
+   the following addition to your ``local.conf`` file::
+
+      EXTRA_IMAGE_FEATURES:append = " tools-debug"
+
+-  Ensure that debug symbols are present. You can do so by adding the
+   corresponding ``-dbg`` package to :term:`IMAGE_INSTALL`::
+
+      IMAGE_INSTALL:append = " packagename-dbg"
+
+   Alternatively, you can add the following to ``local.conf`` to include
+   all the debug symbols::
+
+      EXTRA_IMAGE_FEATURES:append = " dbg-pkgs"
+
+.. note::
+
+   To improve the debug information accuracy, you can reduce the level
+   of optimization used by the compiler. For example, when adding the
+   following line to your ``local.conf`` file, you will reduce optimization
+   from :term:`FULL_OPTIMIZATION` of "-O2" to :term:`DEBUG_OPTIMIZATION`
+   of "-O -fno-omit-frame-pointer"::
+
+           DEBUG_BUILD = "1"
+
+   Consider that this will reduce the application's performance and is
+   recommended only for debugging purposes.
+
+Other Debugging Tips
+====================
+
+Here are some other tips that you might find useful:
+
+-  When adding new packages, it is worth watching for undesirable items
+   making their way into compiler command lines. For example, you do not
+   want references to local system files like ``/usr/lib/`` or
+   ``/usr/include/``.
+
+-  If you want to remove the ``psplash`` boot splashscreen, add
+   ``psplash=false`` to the kernel command line. Doing so prevents
+   ``psplash`` from loading and thus allows you to see the console. It
+   is also possible to switch out of the splashscreen by switching the
+   virtual console (e.g. Fn+Left or Fn+Right on a Zaurus).
+
+-  Removing :term:`TMPDIR` (usually ``tmp/``, within the
+   :term:`Build Directory`) can often fix temporary build issues. Removing
+   :term:`TMPDIR` is usually a relatively cheap operation, because task output
+   will be cached in :term:`SSTATE_DIR` (usually ``sstate-cache/``, which is
+   also in the :term:`Build Directory`).
+
+   .. note::
+
+      Removing :term:`TMPDIR` might be a workaround rather than a fix.
+      Consequently, trying to determine the underlying cause of an issue before
+      removing the directory is a good idea.
+
+-  Understanding how a feature is used in practice within existing
+   recipes can be very helpful. It is recommended that you configure
+   some method that allows you to quickly search through files.
+
+   Using GNU Grep, you can use the following shell function to
+   recursively search through common recipe-related files, skipping
+   binary files, ``.git`` directories, and the :term:`Build Directory`
+   (assuming its name starts with "build")::
+
+      g() {
+          grep -Ir \
+               --exclude-dir=.git \
+               --exclude-dir='build*' \
+               --include='*.bb*' \
+               --include='*.inc*' \
+               --include='*.conf*' \
+               --include='*.py*' \
+               "$@"
+      }
+
+   Following are some usage examples::
+
+      $ g FOO # Search recursively for "FOO"
+      $ g -i foo # Search recursively for "foo", ignoring case
+      $ g -w FOO # Search recursively for "FOO" as a word, ignoring e.g. "FOOBAR"
+
+   If figuring
+   out how some feature works requires a lot of searching, it might
+   indicate that the documentation should be extended or improved. In
+   such cases, consider filing a documentation bug using the Yocto
+   Project implementation of
+   :yocto_bugs:`Bugzilla <>`. For information on
+   how to submit a bug against the Yocto Project, see the Yocto Project
+   Bugzilla :yocto_wiki:`wiki page </Bugzilla_Configuration_and_Bug_Tracking>`
+   and the
+   ":ref:`dev-manual/changes:submitting a defect against the yocto project`"
+   section.
+
+   .. note::
+
+      The manuals might not be the right place to document variables
+      that are purely internal and have a limited scope (e.g. internal
+      variables used to implement a single ``.bbclass`` file).
+