diff --git a/poky/documentation/dev-manual/qemu.rst b/poky/documentation/dev-manual/qemu.rst
index d9b9f69..d431ea4 100644
--- a/poky/documentation/dev-manual/qemu.rst
+++ b/poky/documentation/dev-manual/qemu.rst
@@ -44,13 +44,13 @@
 have the proper artifacts (i.e. image files and root filesystems)
 available. Follow these general steps to run QEMU:
 
-1. *Install QEMU:* QEMU is made available with the Yocto Project a
+#. *Install QEMU:* QEMU is made available with the Yocto Project a
    number of ways. One method is to install a Software Development Kit
    (SDK). See ":ref:`sdk-manual/intro:the qemu emulator`" section in the
    Yocto Project Application Development and the Extensible Software
    Development Kit (eSDK) manual for information on how to install QEMU.
 
-2. *Setting Up the Environment:* How you set up the QEMU environment
+#. *Setting Up the Environment:* How you set up the QEMU environment
    depends on how you installed QEMU:
 
    -  If you cloned the ``poky`` repository or you downloaded and
@@ -66,7 +66,7 @@
 
          . poky_sdk/environment-setup-core2-64-poky-linux
 
-3. *Ensure the Artifacts are in Place:* You need to be sure you have a
+#. *Ensure the Artifacts are in Place:* You need to be sure you have a
    pre-built kernel that will boot in QEMU. You also need the target
    root filesystem for your target machine's architecture:
 
@@ -84,7 +84,7 @@
    Extensible Software Development Kit (eSDK) manual for information on
    how to extract a root filesystem.
 
-4. *Run QEMU:* The basic ``runqemu`` command syntax is as follows::
+#. *Run QEMU:* The basic ``runqemu`` command syntax is as follows::
 
       $ runqemu [option ] [...]
 
@@ -103,7 +103,9 @@
       automatically finds the ``bzImage-qemux86-64.bin`` image file and
       the ``core-image-minimal-qemux86-64-20200218002850.rootfs.ext4``
       (assuming the current build created a ``core-image-minimal``
-      image).
+      image)::
+
+        $ runqemu qemux86-64
 
       .. note::
 
@@ -111,14 +113,9 @@
          and uses the most recently built image according to the
          timestamp.
 
-      ::
-
-        $ runqemu qemux86-64
-
    -  This example produces the exact same results as the previous
       example. This command, however, specifically provides the image
-      and root filesystem type.
-      ::
+      and root filesystem type::
 
          $ runqemu qemux86-64 core-image-minimal ext4
 
@@ -127,23 +124,20 @@
       variable ``FSTYPE`` to ``cpio.gz``. Also, for audio to be enabled,
       an appropriate driver must be installed (see the ``audio`` option
       in :ref:`dev-manual/qemu:\`\`runqemu\`\` command-line options`
-      for more information).
-      ::
+      for more information)::
 
          $ runqemu qemux86-64 ramfs audio
 
    -  This example does not provide enough information for QEMU to
       launch. While the command does provide a root filesystem type, it
-      must also minimally provide a `MACHINE`, `KERNEL`, or `VM` option.
-      ::
+      must also minimally provide a `MACHINE`, `KERNEL`, or `VM` option::
 
          $ runqemu ext4
 
    -  This example specifies to boot a virtual machine image
       (``.wic.vmdk`` file). From the ``.wic.vmdk``, ``runqemu``
       determines the QEMU architecture (`MACHINE`) to be "qemux86-64" and
-      the root filesystem type to be "vmdk".
-      ::
+      the root filesystem type to be "vmdk"::
 
          $ runqemu /home/scott-lenovo/vm/core-image-minimal-qemux86-64.wic.vmdk
 
@@ -190,7 +184,7 @@
 NFS server to avoid that. Follow these steps to set up for running QEMU
 using an NFS server.
 
-1. *Extract a Root Filesystem:* Once you are able to run QEMU in your
+#. *Extract a Root Filesystem:* Once you are able to run QEMU in your
    environment, you can use the ``runqemu-extract-sdk`` script, which is
    located in the ``scripts`` directory along with the ``runqemu``
    script.
@@ -204,7 +198,7 @@
 
       runqemu-extract-sdk ./tmp/deploy/images/qemux86-64/core-image-sato-qemux86-64.tar.bz2 test-nfs
 
-2. *Start QEMU:* Once you have extracted the file system, you can run
+#. *Start QEMU:* Once you have extracted the file system, you can run
    ``runqemu`` normally with the additional location of the file system.
    You can then also make changes to the files within ``./test-nfs`` and
    see those changes appear in the image in real time. Here is an
@@ -329,7 +323,7 @@
      Simplified QEMU command-line options can be passed with:
        nographic - disable video console
        serial - enable a serial console on /dev/ttyS0
-       slirp - enable user networking, no root privileges is required
+       slirp - enable user networking, no root privileges required
        kvm - enable KVM when running x86/x86_64 (VT-capable CPU required)
        kvm-vhost - enable KVM with vhost when running x86/x86_64 (VT-capable CPU required)
        publicvnc - enable a VNC server open to all hosts
@@ -427,6 +421,29 @@
    networking that does not need root access but also is not as easy to
    use or comprehensive as the default.
 
+   Using ``slirp`` by default will forward the guest machine's
+   22 and 23 TCP ports to host machine's 2222 and 2323 ports
+   (or the next free ports). Specific forwarding rules can be configured
+   by setting ``QB_SLIRP_OPT`` as environment variable or in ``qemuboot.conf``
+   in the :term:`Build Directory` ``deploy/image`` directory.
+   Examples::
+
+      QB_SLIRP_OPT="-netdev user,id=net0,hostfwd=tcp::8080-:80"
+
+      QB_SLIRP_OPT="-netdev user,id=net0,hostfwd=tcp::8080-:80,hostfwd=tcp::2222-:22"
+
+   The first example forwards TCP port 80 from the emulated system to
+   port 8080 (or the next free port) on the host system,
+   allowing access to an http server running in QEMU from
+   ``http://<host ip>:8080/``.
+
+   The second example does the same, but also forwards TCP port 22 on the
+   guest system to 2222 (or the next free port) on the host system,
+   allowing ssh access to the emulated system using
+   ``ssh -P 2222 <user>@<host ip>``.
+
+   Keep in mind that proper configuration of firewall software is required.
+
 -  ``kvm``: Enables KVM when running "qemux86" or "qemux86-64" QEMU
    architectures. For KVM to work, all the following conditions must be
    met: