diff --git a/poky/documentation/dev-manual/read-only-rootfs.rst b/poky/documentation/dev-manual/read-only-rootfs.rst
new file mode 100644
index 0000000..251178e
--- /dev/null
+++ b/poky/documentation/dev-manual/read-only-rootfs.rst
@@ -0,0 +1,89 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Creating a Read-Only Root Filesystem
+************************************
+
+Suppose, for security reasons, you need to disable your target device's
+root filesystem's write permissions (i.e. you need a read-only root
+filesystem). Or, perhaps you are running the device's operating system
+from a read-only storage device. For either case, you can customize your
+image for that behavior.
+
+.. note::
+
+   Supporting a read-only root filesystem requires that the system and
+   applications do not try to write to the root filesystem. You must
+   configure all parts of the target system to write elsewhere, or to
+   gracefully fail in the event of attempting to write to the root
+   filesystem.
+
+Creating the Root Filesystem
+============================
+
+To create the read-only root filesystem, simply add the
+"read-only-rootfs" feature to your image, normally in one of two ways.
+The first way is to add the "read-only-rootfs" image feature in the
+image's recipe file via the :term:`IMAGE_FEATURES` variable::
+
+   IMAGE_FEATURES += "read-only-rootfs"
+
+As an alternative, you can add the same feature
+from within your :term:`Build Directory`'s ``local.conf`` file with the
+associated :term:`EXTRA_IMAGE_FEATURES` variable, as in::
+
+   EXTRA_IMAGE_FEATURES = "read-only-rootfs"
+
+For more information on how to use these variables, see the
+":ref:`dev-manual/customizing-images:Customizing Images Using Custom \`\`IMAGE_FEATURES\`\` and \`\`EXTRA_IMAGE_FEATURES\`\``"
+section. For information on the variables, see
+:term:`IMAGE_FEATURES` and
+:term:`EXTRA_IMAGE_FEATURES`.
+
+Post-Installation Scripts and Read-Only Root Filesystem
+=======================================================
+
+It is very important that you make sure all post-Installation
+(``pkg_postinst``) scripts for packages that are installed into the
+image can be run at the time when the root filesystem is created during
+the build on the host system. These scripts cannot attempt to run during
+the first boot on the target device. With the "read-only-rootfs" feature
+enabled, the build system makes sure that all post-installation scripts
+succeed at file system creation time. If any of these scripts
+still need to be run after the root filesystem is created, the build
+immediately fails. These build-time checks ensure that the build fails
+rather than the target device fails later during its initial boot
+operation.
+
+Most of the common post-installation scripts generated by the build
+system for the out-of-the-box Yocto Project are engineered so that they
+can run during root filesystem creation (e.g. post-installation scripts
+for caching fonts). However, if you create and add custom scripts, you
+need to be sure they can be run during this file system creation.
+
+Here are some common problems that prevent post-installation scripts
+from running during root filesystem creation:
+
+-  *Not using $D in front of absolute paths:* The build system defines
+   ``$``\ :term:`D` when the root
+   filesystem is created. Furthermore, ``$D`` is blank when the script
+   is run on the target device. This implies two purposes for ``$D``:
+   ensuring paths are valid in both the host and target environments,
+   and checking to determine which environment is being used as a method
+   for taking appropriate actions.
+
+-  *Attempting to run processes that are specific to or dependent on the
+   target architecture:* You can work around these attempts by using
+   native tools, which run on the host system, to accomplish the same
+   tasks, or by alternatively running the processes under QEMU, which
+   has the ``qemu_run_binary`` function. For more information, see the
+   :ref:`ref-classes-qemu` class.
+
+Areas With Write Access
+=======================
+
+With the "read-only-rootfs" feature enabled, any attempt by the target
+to write to the root filesystem at runtime fails. Consequently, you must
+make sure that you configure processes and applications that attempt
+these types of writes do so to directories with write access (e.g.
+``/tmp`` or ``/var/run``).
+