subtree updates Jan-13-2023
meta-openembedded: d04444509a..cd13881611:
Alex Kiernan (10):
mdns: Upgrade 1310.140.1 -> 1790.40.31
mdns: Set MDNS_VERSIONSTR_NODTS
mdns: Upgrade 1790.40.31 -> 1790.60.25
ostree: Upgrade 2022.5 -> 2022.7
ostree: Use systemd_system_unitdir for systemd units
ostree: Switch to fuse3 which is supported in ostree now
ostree: Fix comments for configuration/ptest
ostree: Handle musl's ERANGE mapping
usbguard: Remove pegtl from DEPENDS
usbguard: Upgrade 1.1.1 -> 1.1.2
Alex Stewart (2):
gvfs: stylize DEPENDS
gvfs: obviate the ssh-client requirement for gvfs
Alexander Kanavin (5):
frr: add a patch to correctly check presence of python from pkg-config
lirc: correctly use PYTHONPATH
libportal: move to oe-core
packagegroup-meta-python: drop python3-strict-rfc3339
nftables: fix builds with latest setuptools
Alexander Stein (1):
dool: Add patch to fix rebuild
Archana Polampalli (1):
Nodejs - Upgrade to 16.18.1
Bartosz Golaszewski (3):
python3-kmod: new package
python3-watchdogdev: new package
packagegroup-meta-python: add missing packages
Bruce Ashfield (1):
zfs: update to 2.1.7
Changqing Li (5):
linuxptp: fix do_compile error
keyutils: fix ptest failed since "+++ Can't Determine Endianness"
graphviz: Do not build tcl support for native
redis: 6.2.7 -> 6.2.8
redis: 7.0.5 -> 7.0.7
Chen Pei (2):
suitesparse:fix git branch in SRC_URI
botan: upgrade 2.19.2 -> 2.19.3
Chen Qi (4):
xfce4-verve-plugin: fix do_configure faiure about missing libpcre
networkmanager: fix dhcpcd PACKAGECONFIG
networkmanager: install config files into correct place
networkmanager: fix /etc/resolv.conf handling
Christian Eggers (1):
boost-url: remove recipe
Clément Péron (3):
navigation: bump proj to 9.1.0 library
proj: add a packageconfig to build as a static library
proj: avoid leaking host path in libproj
Devendra Tewari (1):
android-tools: Use echo instead of bbnote
Dmitry Baryshkov (1):
nss: fix cross-compilation error
Erwann Roussy (3):
python3-schedutils: add recipe
python3-linux-procfs: add recipe
tuna: add recipe
Fabio Estevam (2):
remmina: Update to 1.4.28
crucible: Upgrade to 2022.12.06
Geoff Parker (1):
python3-yappi: upgrade 1.3.6 -> 1.4.0, python 3.11 compatible
Gerbrand De Laender (1):
python3-aioserial: new package
Gianfranco Costamagna (2):
vbxguestdrivers: upgrade 7.0.2 -> 7.0.4
boinc-client: Update boinc from 7.18.1 to 7.20.4
Gianluigi Spagnuolo (1):
libbpf: add native and nativesdk BBCLASSEXTEND
Hains van den Bosch (2):
python3-twisted: Add python3-asyncio to RDEPENDS
python3-twisted: Add python3-typing-extensions to RDEPENDS
He Zhe (1):
protobuf: upgrade 3.21.5 -> 3.21.10
Jose Quaresma (1):
lshw: bump to 42fef565
Kai Kang (31):
freeradius: fix multilib systemd service start failure
wxwidgets: 3.1.5 -> 3.2.1
python3-attrdict3: add recipe with version 2.0.2
python3-wxgtk4: 4.1.1 -> 4.2.0
xfce4-settings: 4.16.3 -> 4.16.5
python3-m2crypto: fix CVE-2020-25657 and buildpaths qa issue
fixup! wxwidgets: 3.1.5 -> 3.2.1
postfix: fix multilib conflict of sample-main.cf
python3-wxgtk4: replace deprecated inspect.getargspec
libxfce4ui: 4.16.1 -> 4.18.0
thunar-volman: 4.16.0 -> 4.18.0
xfce4-cpufreq-plugin: 1.2.7 -> 1.2.8
xfce4-wavelan-plugin: 0.6.2 -> 0.6.3
xfce4-cpugraph-plugin: 1.2.6 -> 1.2.7
xfce4-sensors-plugin: 1.4.3 -> 1.4.4
thunar-shares-plugin: Bump GLib minimum required to 2.26
xfce4-dev-tools: 4.16.0 -> 4.18.0
libxfce4util: 4.16.0 -> 4.18.0
exo: 4.16.4 -> 4.18.0
garcon: 4.16.1 -> 4.18.0
xfce4-panel: 4.16.3 -> 4.18.0
thunar: 4.16.9 -> 4.18.0
tumbler: 4.16.0 -> 4.18.0
xfconf: 4.16.0 -> 4.18.0
xfce4-appfinder: 4.16.1 -> 4.18.0
xfce4-settings: 4.16.5 -> 4.18.0
xfce4-power-manager: 4.16.0 -> 4.18.0
xfce4-session: 4.16.0 -> 4.18.0
xfwm4: 4.16.1 -> 4.18.0
xfdesktop: 4.16.0 -> 4.18.0
xorg-lib: set XORG_EXT for recipes
Khem Raj (91):
gnome-text-editor: Add missing libpcre build time depenedency
ettercap: Add missing dependency on libpcre
xcb-util-cursor: Update to 0.1.4
lldpd: Use github release assets for SRC_URI
aufs-util: Fix build with large file support enabled systems
volume-key: Inherit python3targetconfig
proj: Enable apps when building native variant
python3-pyproj: Export PROJ_DIR
satyr: Inherit python3targetconfig
rest: Re-add 0.8.1
gfbgraph: Use rest 0.8.1
audit: Inherit python3targetconfig
opensaf: Check for _FILE_OFFSET_BITS instead of __TIMESIZE
flite: Add missing deps on alsa-lib and chrpath
python3-pystemd: Regenerate .c sources using newer cython
libreport: Inherit python3targetconfig
uw-imap: Disable parallelism
gnome-calendar: Upgrade to 43.1
gnome-photos: Upgrade to 43.0
libgweather: Remove 40.0
waf-samba.bbclass: point PYTHON_CONFIG to target python3-config
amtk: Add missing dep on python3-pygments-native
fontforge: Inherit python3targetconfig
tepl: Add missing dep on python3-pygments-native
alsa-oss: Remove recipe
opencv: Check for commercial_ffmpeg as well to enable ffmpeg
opencv: Fix build with ffmpeg 5.1+
fwts: Upgrade to 22.11.00
minio: Disable on mips
sip: Add recipe for 6.7.5
imapfilter: Upgrade to 2.7.6
perfetto: Do not pass TUNE_CCARGS to native/host compiler
stressapptest: Upgrade to latest tip
mariadb: Upgrade to 10.11.1
surf: Depend on gcr3
fatcat: Enable 64bit off_t
stressapptest: Fix build with largefile support and musl
nspr: Upgrade to 4.35
cryptsetup: Upgrade to 2.6.0
libyui,libyui-ncurses: Upgrade to 4.2.3
inotify-tools: Fix build on musl and lfs64
sdbus-c++-libsystemd: Upgrade to 250.9 systemd release
xfsprogs: Upgrade to 6.0.0
drbd,drbd-utils: Upgrade to 9.2.1 and drbd-utils to 9.22.0
libtraceevent: Add recipe
libtracefs: Add recipe
trace-cmd: Remove use of off64_t and lseek64
xfsdump: Add -D_LARGEFILE64_SOURCE on musl
xfstests: Add -D_LARGEFILE64_SOURCE on musl
mariadb: Alias lseek64/open64/ftruncate64 on musl systems
gperftools: Define off64_t on musl
android-tools: Define lseek64 = lseek on musl
php: Add -D_LARGEFILE64_SOURCE to cflags
spice-gtk: Use libucontext for coroutines on musl
wxwidgets: Fix build with musl
wxwidgets: Fix locale on musl
wxwidgets: Set HAVE_LARGEFILE_SUPPORT
python3-wxgtk4: Do not use GetAssertStackTrace with USE_STACKWALKER disabled
f2fs-tools: Upgrade to 1.15.0
trace-cmd: Pass ldflags to compiler
parole: Define DATADIRNAME
abseil-cpp: Replace off64_t with off_t
vsftpd_3.0.5.bb: Define _LARGEFILE64_SOURCE on musl
mozjs-102: Disable mozilla stackwalk on musl
fatresize: Fix build when 64bit time_t is enabled
boinc-client: Fix build when using 64bit time_t
python3-grpcio: Define -D_LARGEFILE64_SOURCE only for musl
gnome-online-accounts: Fix build race seen on musl systems
imagemagick: Do not set ac_cv_sys_file_offset_bits
spdlog: Do not use LFS64 functions with musl
mongodb: Do not use off64_t on musl
dracut: Do not undefine _FILE_OFFSET_BITS
libcamera: Diable 64bit time_t on glibc targets
v4l-utils: Diable 64bit time_t on glibc targets
opensaf: Fix the check for __fsblkcnt64_t size
libcereal,poco: Link with -latomic on ppc32 as well
sshpass: Use SPDX identified string for GPLv2
nftables: Upgrade to 1.0.6
mycroft: Check for pulseaudio in distro features
trace-cmd: Build libs before building rest
open-vm-tools: Fix build with 64-bit time_t
libtraceevent: Move plugins into package of its own
trace-cmd: Upgrade to 3.1.5
luajit: Update to latest on v2.1 branch
concurrencykit: Update to 0.7.0
concurrencykit: Set correct PLAT value for riscv32
concurrencykit: Fix build on riscv32 and riscv64
sysbench: Enable only on architectures supporting LuaJIT
packagegroup-meta-oe: Ensure sysbench is included in limited arches
hwloc: Update to 2.9.0
fluentbit: Link with libatomic on ppc32
Lei Maohui (1):
polkit: Fix multilib builds
Leon Anavi (9):
python3-watchdog: Upgrade 2.2.0 -> 2.2.1
python3-zeroconf: Upgrade 0.39.4 -> 0.47.1
python3-croniter: Upgrade 1.3.7 -> 1.3.8
python3-coverage: Upgrade 7.0.1 -> 7.0.3
python3-prompt-toolkit: Upgrade 3.0.31 -> 3.0.36
python3-simplejson: Upgrade 3.18.0 -> 3.18.1
python3-termcolor: Upgrade 2.1.1 -> 2.2.0
python3-cantools: Upgrade 37.2.0 -> 38.0.0
python3-marshmallow: Upgrade 3.18.0 -> 3.19.0
Livin Sunny (1):
libwebsockets: add ipv6 in PACKAGECONFIG
Markus Volk (88):
blueman: add RDEPEND on python3-fcntl
hwdata: add patch to use sysroot prefix for pkgdatadir
pipewire: upgrade 0.3.59 -> 0.3.60
spirv-cross: upgrade; fix build
blueman: upgrade 2.34 -> 2.35
pipewire: upgrade 0.3.60 -> 0.3.61
iwd: upgrade 1.30 -> 2.0
libgdata: use gcr3
libgweather: update 4.0.0 -> 4.2.0
gnome-online-accounts: use gcr3
geary: build with gcr3
gnome-keyring: use gcr3
evolution-data-server: update 3.44.2 -> 3.46.1
gnome-settings-daemon: update 42.1 -> 43.0
libnma: update 1.8.38 -> 1.10.4
geocode-glib: build with libsoup-3.0
gjs: update 1.72.2 -> 1.75.1
gnome-shell: update 42.0 -> 43.1
mutter: update 42.0 -> 43.1
polkit: add recipe for v122
mozjs: update 98 -> 102
appstream-glib: update 0.7.18 -> 0.8.2
gthumb: build with libsoup-3
amtk: update 5.3.1 -> 5.6.1
gedit: update 42.2 -> 43.2
evolution-data-server: remove libgdata dependency
tepl: update 6.0.0 -> 6.2.0
perfetto: pass TUNE_CCARGS to use machine tune
gnome-photos: update dependencies
thunar-archive-plugin: update 0.4.0 -> 0.5.0
libadwaita: remove deprecated sassc-native dependency
gnome-shell: remove deprecated sassc-native dependency
spice-gtk: add missing license information
pipewire: update 0.3.61 -> 0.3.62
gdm: update 42.0 -> 43.0
gnome-session: update 42.0 -> 43-0
geoclue: update to latest commit to allow to build with libsoup-3.0
gvfs: fix polkit homedir
editorconfig: add recipe
tracker: update 3.4.1 -> 3.4.2
gvfs: fix dependencies
gnome-calculator: update 42.2 -> 43.0.1
tracker-miners: update 3.4.1 -> 3.4.2
gnome-photos: add missing runtime dependency on tracker-miners
gtksourceview5: update 5.4.2 -> 5.6.1
remmina: build with libsoup-3.0
ostree: replace libsoup-2.4 by curl
gnome-text-editor: update 42.2 -> 43.1
gtk4: remove recipe
libxmlb: allow to build native
pipewire: update 0.3.62 -> 0.3.63
gnome-shell-extensions: update SRC_URI and remove sassc-native dep
grilo: update 0.3.14 -> 0.3.15
libstemmer: move recipe to meta-oe
xdg-desktop-portal: add recipe
bubblewrap: import recipe from meta-security
gnome-software: add recipe
basu: import recipe from meta-wayland
xdg-desktop-portal-wlr: add recipe
appstream: add recipe
flatpak: add recipe
flatpak-xdg-utils: add recipe
flatpak: add runtime dependency on flatpak-xdg-utils
wireplumber: update 0.4.12 -> 0.4.13
wireplumber: build with dbus support by default
xdg-desktop-portal-gnome: add recipe
libcloudproviders: add recipe
evince: update 42.3 -> 43.1
libportal: build libportal-gtk4 and vala support
nautilus: update 42.2 -> 43.1
gnome-desktop: update 42.0 -> 43
file-roller: update 3.42.0 -> 43.0
wireplumber: dont start systemd system service by default
gnome-bluetooth: update 42.4 -> 42.5
gnome-flashback: update 3.44.0 -> 3.46.0
libwnck3: update 40.1 -> 43.0
gnome-panel: update 3.44.0 -> 3.47.1
gnome-terminal: update 3.42.2 -> 3.46.7
dconf-editor: update 3.38.3 -> 43.0
gnome-shell: add missing RDEPENDS
gnome-control-center: update 42.0 -> 43.2
gnome-shell: add runtime dependency on adwaita-icon-theme
xdg-desktop-portal-gtk: add recipe
thunar: add tumbler to RRECOMMENDS
gnome:terminal add missing inherit meson
gnome-disk-utility: update 42.0 -> 43.0
eog: add recipe
libdecor: import recipe
Martin Jansa (3):
nss: fix SRC_URI
geoclue: fix polkit files only with modem-gps PACKAGECONFIG
layer.conf: update LAYERSERIES_COMPAT for mickledore
Mathieu Dubois-Briand (2):
nss: Add missing CVE product
nss: Whitelist CVEs related to libnssdbm
Matthias Klein (1):
paho-mqtt-c: upgrade 1.3.11 -> 1.3.12
Max Krummenacher (1):
opencv: follow changed name license_flags_accepted
Mingli Yu (25):
gnome-calculator: add opengl to REQUIRED_DISTRO_FEATURES
waylandpp: add opengl to REQUIRED_DISTRO_FEATURES
libnma: add opengl to REQUIRED_DISTRO_FEATURES
network-manager-applet: add opengl to REQUIRED_DISTRO_FEATURES
gssdp: check opengl is enabled or not
gtksourceview5: add opengl to REQUIRED_DISTRO_FEATURES
gnome-font-viewer: add opengl to REQUIRED_DISTRO_FEATURES
libxfce4ui: check opengl DISTRO_FEATURES
gnome-desktop: add opengl to REQUIRED_DISTRO_FEATURES
ibus: add opengl related check
nautilus: add opengl to REQUIRED_DISTRO_FEATURES
gnome-bluetooth: add opengl to REQUIRED_DISTRO_FEATURES
evince: add opengl to REQUIRED_DISTRO_FEATURES
gnome-calendar: add opengl to REQUIRED_DISTRO_FEATURES
xf86-video-amdgpu: add opengl to REQUIRED_DISTRO_FEATURES
spice-gtk: add opengl to REQUIRED_DISTRO_FEATURES
grail: add opengl to REQUIRED_DISTRO_FEATURES
frame: add opengl to REQUIRED_DISTRO_FEATURES
geis: add opengl to REQUIRED_DISTRO_FEATURES
evolution-data-server: add opengl to REQUIRED_DISTRO_FEATURES
libgweather4: add opengl to REQUIRED_DISTRO_FEATURES
geary: add opengl to REQUIRED_DISTRO_FEATURES
file-roller: add opengl to REQUIRED_DISTRO_FEATURES
gnome-photos: add opengl to REQUIRED_DISTRO_FEATURES
xdg-desktop-portal-wlr: add opengl to REQUIRED_DISTRO_FEATURES
Naveen Saini (3):
opencl-headers: add native and nativesdk
tcsh: add native nativesdk BBCLASSEXTEND
tbb: upgrade 2021.5.0 -> 2021.7.0
Omkar Patil (1):
ntfs-3g-ntfsprogs: Upgrade 2022.5.17 to 2022.10.3
Ovidiu Panait (1):
multipath-tools: upgrade 0.8.4 -> 0.9.3
Peter Bergin (1):
sysbench: Upgrade 0.4.12 -> 1.0.20
Peter Kjellerstedt (4):
chrony: Make it possible to enable editline support again
chrony: Remove the libcap and nss PACKAGECONFIGs
Revert "lldpd: Use github release assets for SRC_URI"
lldpd: Correct the checksum for the tar ball to match 1.0.16
Preeti Sachan (1):
fluidsynth: update SRC_URI to remove non-existing 2.2.x branch
Roger Knecht (1):
python3-rapidjson: add recipe
Sakib Sajal (1):
minio: fix license information
Samuli Piippo (1):
protobuf: stage protoc binary to sysroot
Tim Orling (4):
libio-pty-perl: upgrade 1.16 -> 1.17; enable ptest
libmozilla-ca-perl: add recipe for 20221114
libio-socket-ssl-perl: upgrade 2.075 -> 2.076
libtest-warnings-perl: move to oe-core
Tomasz Żyjewski (2):
python3-binwalk: add recipe for version 2.3.3
python3-uefi-firmware: add recipe for version 1.9
Wang Mingyu (190):
byacc: upgrade 20220128 -> 20221106
libforms: upgrade 1.2.4 -> 1.2.5pre1
libnftnl: upgrade 1.2.3 -> 1.2.4
mpich: upgrade 4.0.2 -> 4.0.3
python3-u-msgpack-python: upgrade 2.7.1 -> 2.7.2
python3-aiosignal: upgrade 1.2.0 -> 1.3.1
python3-eth-hash: upgrade 0.5.0 -> 0.5.1
python3-frozenlist: upgrade 1.3.1 -> 1.3.3
python3-google-auth: upgrade 2.14.0 -> 2.14.1
python3-greenlet: upgrade 2.0.0 -> 2.0.1
python3-imageio: upgrade 2.22.3 -> 2.22.4
python3-pycocotools: upgrade 2.0.5 -> 2.0.6
babl: upgrade 0.1.96 -> 0.1.98
ctags: upgrade 5.9.20221106.0 -> 5.9.20221113.0
gegl: upgrade 0.4.38 -> 0.4.40
freerdp: upgrade 2.8.1 -> 2.9.0
glibmm-2.68: upgrade 2.72.1 -> 2.74.0
googlebenchmark: upgrade 1.7.0 -> 1.7.1
gnome-backgrounds: upgrade 42.0 -> 43
nano: upgrade 6.4 -> 7.0
networkmanager-openvpn: upgrade 1.10.0 -> 1.10.2
python3-django: upgrade 4.1 -> 4.1.3
python3-flask-migrate: upgrade 3.1.0 -> 4.0.0
python3-eth-utils: upgrade 2.0.0 -> 2.1.0
python3-eventlet: upgrade 0.33.1 -> 0.33.2
python3-googleapis-common-protos: upgrade 1.56.4 -> 1.57.0
python3-google-api-python-client: upgrade 2.65.0 -> 2.66.0
python3-pymongo: upgrade 4.3.2 -> 4.3.3
lldpd: upgrade 1.0.15 -> 1.0.16
audit: upgrade 3.0.8 -> 3.0.9
ccid: upgrade 1.5.0 -> 1.5.1
colord: upgrade 1.4.5 -> 1.4.6
ctags: upgrade 5.9.20221113.0 -> 5.9.20221120.0
flatbuffers: upgrade 22.10.26 -> 22.11.23
libglvnd: upgrade 1.5.0 -> 1.6.0
gensio: upgrade 2.5.2 -> 2.6.1
mg: upgrade 20220614 -> 20221112
nbdkit: upgrade 1.33.2 -> 1.33.3
xfstests: upgrade 2022.10.30 -> 2022.11.06
pcsc-lite: upgrade 1.9.8 -> 1.9.9
python3-matplotlib-inline: upgrade 0.1.2 -> 0.1.6
python3-astroid: upgrade 2.12.12 -> 2.12.13
python3-asyncinotify: upgrade 2.0.5 -> 2.0.8
python3-charset-normalizer: upgrade 3.0.0 -> 3.0.1
python3-dateparser: upgrade 1.1.0 -> 1.1.4
python3-can: upgrade 4.0.0 -> 4.1.0
python3-flask-socketio: upgrade 5.3.1 -> 5.3.2
python3-ipython: upgrade 8.2.0 -> 8.6.0
python3-langtable: upgrade 0.0.60 -> 0.0.61
python3-jedi: upgrade 0.18.1 -> 0.18.2
python3-grpcio-tools: upgrade 1.50.0 -> 1.51.0
python3-grpcio: upgrade 1.50.0 -> 1.51.0
python3-networkx: upgrade 2.8.7 -> 2.8.8
python3-pyatspi: upgrade 2.38.2 -> 2.46.0
python3-pandas: upgrade 1.5.1 -> 1.5.2
python3-pybind11-json: upgrade 0.2.11 -> 0.2.13
python3-pychromecast: upgrade 12.1.4 -> 13.0.1
python3-pycodestyle: upgrade 2.9.1 -> 2.10.0
xterm: upgrade 373 -> 377
smarty: upgrade 4.2.1 -> 4.3.0
spdlog: upgrade 1.10.0 -> 1.11.0
python3-pyperf: upgrade 2.4.1 -> 2.5.0
python3-pyflakes: upgrade 2.5.0 -> 3.0.1
python3-pymisp: upgrade 2.4.157 -> 2.4.165.1
capnproto: upgrade 0.10.2 -> 0.10.3
libass: upgrade 0.16.0 -> 0.17.0
ctags: upgrade 5.9.20221120.0 -> 5.9.20221127.0
libio-socket-ssl-perl: upgrade 2.076 -> 2.077
python3-grpcio-tools: upgrade 1.51.0 -> 1.51.1
python3-asyncinotify: upgrade 2.0.8 -> 3.0.1
python3-grpcio: upgrade 1.51.0 -> 1.51.1
opensc: upgrade 0.22.0 -> 0.23.0
python3-ipython: upgrade 8.6.0 -> 8.7.0
ply: upgrade 2.2.0 -> 2.3.0
python3-apt: upgrade 2.3.0 -> 2.5.0
poppler: upgrade 22.11.0 -> 22.12.0
python3-asttokens: upgrade 2.1.0 -> 2.2.0
python3-cbor2: upgrade 5.4.3 -> 5.4.5
python3-geomet: upgrade 0.3.0 -> 1.0.0
python3-google-api-core: upgrade 2.10.2 -> 2.11.0
python3-google-api-python-client: upgrade 2.66.0 -> 2.68.0
python3-path: upgrade 16.5.0 -> 16.6.0
python3-google-auth: upgrade 2.14.1 -> 2.15.0
zabbix: upgrade 6.2.4 -> 6.2.5
xmlsec1: upgrade 1.2.36 -> 1.2.37
smcroute: upgrade 2.5.5 -> 2.5.6
python3-protobuf: upgrade 4.21.9 -> 4.21.10
python3-traitlets: upgrade 5.5.0 -> 5.6.0
python3-twine: upgrade 4.0.1 -> 4.0.2
python3-web3: upgrade 5.31.1 -> 5.31.2
python3-ujson: upgrade 5.5.0 -> 5.6.0
ctags: upgrade 5.9.20221127.0 -> 5.9.20221204.0
dnsmasq: upgrade 2.87 -> 2.88
flatbuffers: upgrade 22.11.23 -> 22.12.06
nbdkit: upgrade 1.33.3 -> 1.33.4
hwdata: upgrade 0.364 -> 0.365
evolution-data-server: update 3.46.1 -> 3.46.2
xfstests: upgrade 2022.11.06 -> 2022.11.27
python3-protobuf: upgrade 4.21.10 -> 4.21.11
python3-traitlets: upgrade 5.6.0 -> 5.7.0
python3-redis: upgrade 4.3.5 -> 4.4.0
python3-web3: upgrade 5.31.2 -> 5.31.3
python3-asttokens: upgrade 2.2.0 -> 2.2.1
python3-cbor2: upgrade 5.4.5 -> 5.4.6
python3-google-api-python-client: upgrade 2.68.0 -> 2.69.0
python3-gmpy2: upgrade 2.1.2 -> 2.1.3
python3-multidict: upgrade 6.0.2 -> 6.0.3
python3-watchdog: upgrade 2.1.9 -> 2.2.0
python3-pychromecast: upgrade 13.0.1 -> 13.0.2
python3-pymisp: upgrade 2.4.165.1 -> 2.4.166
python3-pytest-xdist: upgrade 3.0.2 -> 3.1.0
python3-yarl: upgrade 1.8.1 -> 1.8.2
zabbix: upgrade 6.2.5 -> 6.2.6
python3-yamlloader: upgrade 1.1.0 -> 1.2.2
tio: upgrade 2.3 -> 2.4
ctags: upgrade 5.9.20221204.0 -> 6.0.20221218.0
dash: upgrade 0.5.11.5 -> 0.5.12
nanopb: upgrade 0.4.6.4 -> 0.4.7
libio-socket-ssl-perl: upgrade 2.077 -> 2.078
libfile-slurper-perl: upgrade 0.013 -> 0.014
protobuf: upgrade 3.21.10 -> 3.21.12
python3-alembic: upgrade 1.8.1 -> 1.9.0
nano: upgrade 7.0 -> 7.1
python3-gmpy2: upgrade 2.1.3 -> 2.1.5
python3-eth-account: upgrade 0.7.0 -> 0.8.0
python3-google-api-python-client: upgrade 2.69.0 -> 2.70.0
python3-protobuf: upgrade 4.21.11 -> 4.21.12
python3-pycares: upgrade 4.2.2 -> 4.3.0
python3-pycurl: upgrade 7.45.1 -> 7.45.2
python3-pychromecast: upgrade 13.0.2 -> 13.0.4
python3-pyproj: upgrade 3.4.0 -> 3.4.1
python3-pydicti: upgrade 1.1.6 -> 1.2.0
python3-sentry-sdk: upgrade 1.11.1 -> 1.12.0
python3-traitlets: upgrade 5.7.0 -> 5.7.1
tio: upgrade 2.4 -> 2.5
python3-sqlalchemy: upgrade 1.4.44 -> 1.4.45
xfsdump: upgrade 3.1.11 -> 3.1.12
python3-isort: upgrade 5.10.1 -> 5.11.3
xfstests: upgrade 2022.11.27 -> 2022.12.11
ctags: upgrade 6.0.20221218.0 -> 6.0.20221225.0
gst-editing-services: upgrade 1.20.4 -> 1.20.5
logcheck: upgrade 1.3.24 -> 1.4.0
memtester: upgrade 4.5.1 -> 4.6.0
libmime-types-perl: upgrade 2.22 -> 2.23
metacity: upgrade 3.46.0 -> 3.46.1
python3-alembic: upgrade 1.9.0 -> 1.9.1
xfstests: upgrade 2022.12.11 -> 2022.12.18
python3-cytoolz: upgrade 0.12.0 -> 0.12.1
python3-asgiref: upgrade 3.5.2 -> 3.6.0
python3-autobahn: upgrade 22.7.1 -> 22.12.1
python3-coverage: upgrade 6.5.0 -> 7.0.1
python3-bitarray: upgrade 2.6.0 -> 2.6.1
python3-imageio: upgrade 2.22.4 -> 2.23.0
python3-isort: upgrade 5.11.3 -> 5.11.4
python3-multidict: upgrade 6.0.3 -> 6.0.4
python3-traitlets: upgrade 5.7.1 -> 5.8.0
python3-pymisp: upgrade 2.4.166 -> 2.4.167
python3-sentry-sdk: upgrade 1.12.0 -> 1.12.1
python3-supervisor: upgrade 4.2.4 -> 4.2.5
wolfssl: upgrade 5.5.3 -> 5.5.4
remmina: upgrade 1.4.28 -> 1.4.29
ser2net: upgrade 4.3.10 -> 4.3.11
tesseract: upgrade 5.2.0 -> 5.3.0
network-manager-applet: upgrade 1.26.0 -> 1.30.0
byacc: upgrade 20221106 -> 20221229
ctags: upgrade 6.0.20221225.0 -> 6.0.20230101.0
flashrom: upgrade 1.2 -> 1.2.1
fontforge: upgrade 20220308 -> 20230101
hunspell: upgrade 1.7.1 -> 1.7.2
libmime-types-perl: upgrade 2.23 -> 2.24
libnet-dns-perl: upgrade 1.35 -> 1.36
tepl: upgrade 6.2.0 -> 6.4.0
tcpdump: upgrade 4.99.1 -> 4.99.2
traceroute: upgrade 2.1.0 -> 2.1.1
openwsman: upgrade 2.7.1 -> 2.7.2
pcsc-tools: upgrade 1.6.0 -> 1.6.1
poppler: upgrade 22.12.0 -> 23.01.0
rsnapshot: upgrade 1.4.4 -> 1.4.5
tree: upgrade 2.0.4 -> 2.1.0
python3-bidict: upgrade 0.22.0 -> 0.22.1
python3-bitarray: upgrade 2.6.1 -> 2.6.2
python3-dateparser: upgrade 1.1.4 -> 1.1.5
python3-lz4: upgrade 4.0.2 -> 4.3.2
python3-mock: upgrade 4.0.3 -> 5.0.0
python3-pillow: upgrade 9.3.0 -> 9.4.0
python3-pydantic: upgrade 1.10.2 -> 1.10.4
python3-pyephem: upgrade 4.1.3 -> 4.1.4
python3-xlsxwriter: upgrade 3.0.3 -> 3.0.5
python3-xxhash: upgrade 3.1.0 -> 3.2.0
dnf-plugins/rpm.py: Fix grammar when RPM_PREFER_ELF_ARCH doesn't exit.
Xiangyu Chen (1):
lldpd: add ptest for lldpd package
Yi Zhao (13):
libpwquality: set correct pam plugin directory
ostree: add runtime dependency bubblewrap for PACKAGECONFIG[selinux]
ostree: fix selinux policy rebuild error on first deployment
frr: upgrade 8.3.1 -> 8.4.1
open-vm-tools: upgrade 12.1.0 -> 12.1.5
libtdb: upgrade 1.4.3 -> 1.4.7
libldb: upgrade 2.3.4 -> 2.6.1
libtalloc: upgrade 2.3.3 -> 2.3.4
libtevent: upgrade 0.10.2 -> 0.13.0
samba upgrade 4.14.14 -> 4.17.4
krb5: upgrade 1.17.2 -> 1.20.1
grubby: update to latest git rev
grubby: drop version 8.40
Zheng Qiu (1):
python3-inotify: add ptest
persianpros (1):
samba: Remove samba related PYTHONHASHSEED patches and use export function
zhengrq.fnst@fujitsu.com (15):
python3-pymodbus: upgrade 3.0.0 -> 3.0.2
python3-pywbemtools: upgrade 1.0.1 -> 1.1.0
python3-stevedore: upgrade 4.1.0 -> 4.1.1
ser2net: upgrade 4.3.9 -> 4.3.10
yelp-tools: upgrade 42.0 -> 42.1
python3-python-vlc: upgrade 3.0.16120 -> 3.0.18121
python3-sqlalchemy: upgrade 1.4.43 -> 1.4.44
python3-zopeinterface: upgrade 5.5.1 -> 5.5.2
python3-simplejson: upgrade 3.17.6 -> 3.18.0
python3-pywbemtools: upgrade 1.0.1 -> 1.1.1
python3-redis: upgrade 4.3.4 -> 4.3.5
python3-texttable: upgrade 1.6.4 -> 1.6.7
python3-sentry-sdk: upgrade 1.9.10 -> 1.11.1
python3-twitter: upgrade 4.10.1 -> 4.12.1
python3-termcolor: upgrade 2.1.0 -> 2.1.1
meta-security: 2aa48e6f4e..f991b20f56:
Alex Kiernan (1):
bubblewrap: Update 0.6.2 -> 0.7.0
Armin Kuster (2):
python3-privacyidea: update to 2.7.4
chipsec: update to 1.9.1
Michael Haener (1):
tpm2-tools: update to 5.3
meta-arm: d5f132b199..5c42f084f7:
Adam Johnston (1):
arm/trusted-services: Fix 'no such file' when building libts
Adrian Herrera (2):
atp: decouple m5readfile from m5ops
atp: move m5readfile to meta-gem5
Adrián Herrera Arcila (5):
atp: fix failing test_readme
gem5: support for EXTRAS
atp: separate recipe for gem5 models
atp: fix machine overrides in recipes
ci: add meta-atp to check-layers
David Bagonyi (1):
meta-arm-toolchain: Drop calls to datastore finalize
Diego Sueiro (2):
arm/classes: Introduce apply_local_src_patches bbclass
arm/trusted-firmware-m: Fix local source patches application
Emekcan (1):
arm/fvp: Upgrade Corstone1000 FVP
Emekcan Aras (6):
arm-bsp/documentation: corstone1000: update the user guide
arm/optee: Move optee-3.18 patches
arm/optee: support optee 3.19
arm-bsp/optee-os: Adds 3.19 bbappend
arm-bsp/optee-os: N1SDP support for optee-os 3.19
arm/qemuarm-secureboot: pin optee-os version
Jon Mason (5):
arm-bsp/trusted-services: rename bbappends with git version
arm/trusted-services: limit the ts compatible machines
arm-bsp/trusted-services: add n1sdp support
arm/trusted-firmware-m: update to 1.6.1
CI: define DEFAULT_TAG and CPU_REQUEST
Khem Raj (1):
gn: Replace lfs64 functions with original counterparts
Mohamed Omar Asaker (5):
arm-bsp/trusted-services: corstone1000: Use the stateless platform service calls
arm-bsp/trusted-firmware-m: Bump TFM to v1.7
arm-bsp/trusted-firmware-m: corstone1000: TFM 1.7
arm-bsp/musca_b1: Edit the platform name
arm-bsp/trusted-firmware-m: Remove TF-M 1.6 recipe
Peter Hoyes (3):
arm/fvp: Backport shlex.join from Python 3.8
arm/fvpboot: Disable timing annotation by default
arm/classes: Ensure patch files are sorted in apply_local_src_patches
Robbie Cao (1):
arm/fvp-base-r-aem: upgrade to version 11.20.15
Ross Burton (17):
CI: revert a meta-clang change which breaks pixman (thus, xserver)
CI: add variables needed for k8s runners
CI: add tags to all jobs
CI: no need to install telnet
CI: fix builds with clang
CI: use the .setup fragment in machine-coverage
arm/fvp-base-a-aem: upgrade to 11.20.15
arm-bsp/edk2-firmware: allow clang builds on juno
ci/get-binary-toolchains: rewrite, slightly
arm-bsp/documentation: update fvp-base documentation to use runfvp
CI: use qemuarm64 for pending-updates report job
meta-atp: remove
meta-gem5: remove
arm/fvp-envelope: name the FVP tarballs for checksums
arm/fvp-envelope: update HOMEPAGE
arm/fvp-base-a-aem: add support for aarch64 binaries
CI: don't pin fvp-base jobs to x86-64
poky: 44bb88cc86..0ce159991d:
Alejandro Hernandez Samaniego (6):
baremetal-image: Avoid overriding qemu variables from IMAGE_CLASSES
rust: Enable building rust from stable, beta and nightly channels
rust: Enable baremetal targets
baremetal-helloworld: Enable x86 and x86-64 ports
baremetal-helloworld: Move from skeleton to recipes-extended matching what rust-hello-world is doing
oe-selftest: Add baremetal toolchain test
Alex Kiernan (20):
rust: Install target.json for target rustc
rust: update 1.65.0 -> 1.66.0
oeqa/runtime/rust: Add basic compile/run test
libstd-rs: Merge .inc into .bb
libstd-rs: Move source directory to library/test
rust-llvm: Merge .inc into .bb
rust-llvm: Update LLVM_VERSION to match embedded version
packagegroup-rust-sdk-target: Add Rust SDK target packagegroup
packagegroup-core-sdk: Add SDK toolchain language selection support
rust: Merge .inc into .bb
rust: Move musl-x86 fix for `__stack_chk_fail_local` to rust-source
cargo: Merge .inc into .bb
cargo: Extend DEBUG_PREFIX_MAP to cover vendor
cargo: Include crossbeam-utils patch
cargo: Drop exclude from world
packagegroup-rust-sdk-target: Add cargo
oeqa/runtime/rust: Add cargo test
classes: image: Set empty weak default IMAGE_LINGUAS
default-distrovars: Include "c" in IMAGE_LINGUAS for glibc
rust: Merge all rustc-source patches into rust-source.inc
Alex Stewart (2):
lsof: add update-alternatives logic
opkg: upgrade to version 0.6.1
Alexander Kanavin (155):
elfutils: update 0.187 -> 0.188
rsync: update 3.2.5 -> 3.2.7
swig: update 4.0.2 -> 4.1.0
tcl: update 8.6.11 -> 8.6.12
quota: update 4.06 -> 4.09
shadow: update 4.12.3 -> 4.13
texinfo: update 6.8 -> 7.0
libhandy: update 1.6.3 -> 1.8.0
xf86-input-mouse: update 1.9.3 -> 1.9.4
flac: update 1.4.0 -> 1.4.2
icu: update 71.1 -> 72-1
libgpg-error: update 1.45 -> 1.46
popt: update 1.18 -> 1.19
vte: update 0.68.0 -> 0.70.1
webkitgtk: update 2.36.7 -> 2.38.2
man-db: update 2.10.2 -> 2.11.1
gawk: update 5.1.1 -> 5.2.1
unfs: update 0.9.22 -> 0.10.0
qemu-helper: depend on unfs3 and pseudo directly
runqemu: do not hardcode the ip address of the nfs server when using tap
selftest/runqemu: reenable the nfs rootfs test
glibc-tests: correctly pull in the actual tests when installing -ptest package
python3: fix tests on x86 (32 bit)
ptest-packagelists.inc: do not run valgrind ptests on 32 bit x86
python3: use the standard shell version of python3-config
python3targetconfig.bbclass: use PYTHONPATH to point to the target config
bitbake: fetch2/wget.py: correctly match versioned directories
devtool/upgrade: correctly handle recipes where S is a subdir of upstream tree
python3-numpy: fix upstream version check
python3-poetry-core: update 1.3.2 -> 1.4.0
tcl: update 8.6.12 -> 8.6.13
libnewt: update 0.52.21 -> 0.52.23
libxdmcp: update 1.1.3 -> 1.1.4
libxpm: update 3.5.13 -> 3.5.14
libxrandr: update 1.5.2 -> 1.5.3
bluez: update 5.65 -> 5.66
libxcrypt: update PV to match SRCREV
python3-dbusmock: update 0.28.4 -> 0.28.6
ruby: merge .inc into .bb
ruby: update 3.1.2 -> 3.1.3
ghostscript: update 9.56.1 -> 10.0.0
tzdata: update 2022d -> 2022g
systemtap: upgrade 4.7 -> 4.8
gnupg: upgrade 2.3.7 -> 2.3.8
ptest-packagelists.inc: correctly assign fast and slow tests
ovmf: update edk2-stable202208 -> edk2-stable202211
llvm: update 15.0.4 -> 15.0.6
tcmode-default.inc: set LLVMVERSION to a major version wildcard
cmake: update 3.24.2 -> 3.25.1
python3-native: further tweak to sysconfig.py to find python includes correctly
libslirp: add recipe to continue slirp support in qemu
qemu: update 7.1.0 -> 7.2.0
systemd: update 251.8 -> 252.4
dpkg: update 1.21.9 -> 1.21.13
python3-installer: update 0.5.1 -> 0.6.0
python3: update 3.11.0 -> 3.11.1
weston: update 11.0.0 -> 11.0.1
xhost: update 1.0.8 -> 1.0.9
xinit: update 1.4.1 -> 1.4.2
xkbcomp: update 1.4.5 -> 1.4.6
xprop: update 1.2.5 -> 1.2.6
xset: update 1.2.4 -> 1.2.5
xvinfo: update 1.1.4 -> 1.1.5
xf86-video-vesa: update 2.5.0 -> 2.6.0
libice: update 1.0.10 -> 1.1.1
libxcomposite: update 0.4.5 -> 0.4.6
libxdamage: update 1.1.5 -> 1.1.6
libxres: update 1.2.1 -> 1.2.2
libxscrnsaver: update 1.2.3 -> 1.2.4
libxv: update 1.0.11 -> 1.0.12
jquery: upgrade 3.6.1 -> 3.6.2
libmodule-build-perl: update 0.4231 -> 0.4232
python3-chardet: upgrade 5.0.0 -> 5.1.0
libarchive: upgrade 3.6.1 -> 3.6.2
stress-ng: upgrade 0.15.00 -> 0.15.01
vulkan: upgrade 1.3.231.1 -> 1.3.236.0
Revert "python3-native: further tweak to sysconfig.py to find python includes correctly"
conf/machine/include: add x86-64-v3 tunes (AVX, AVX2, BMI1, BMI2, F16C, FMA, LZCNT, MOVBE, XSAVE)
go: update 1.19.3 -> 1.19.4
vulkan-samples: update to latest revision
boost-build-native: update 1.80.0 -> 1.81.0
qemu: disable sporadically failing test-io-channel-command
devtool: process local files only for the main branch
libportal: add from meta-openembedded/meta-gnome
libportal: convert from gtk-doc to gi-docgen
epiphany: update 42.4 -> 43.0
qemux86-64: build for x86-64-v3 (2013 Haswell and later) rather than Core 2 from 2006
valgrind: disable tests that started failing after switching to x86-64-v3 target
glib-2.0: upgrade 2.74.3 -> 2.74.4
jquery: upgrade 3.6.2 -> 3.6.3
nasm: update 2.15.05 -> 2.16.01
ffmpeg: use nasm patched-in debug-prefix-map option to restore reproducibility
gtk+3: update 3.24.35 -> 3.24.36
libva-utils: update 2.16.0 -> 2.17.0
xcb-util: update 0.4.0 -> 0.4.1
gnupg: update 2.3.8 -> 2.4.0
libksba: update 1.6.2 -> 1.6.3
python3-pycryptodomex: upgrade 3.15.0 -> 3.16.0
piglit: upgrade to latest revision
python3-setuptools-scm: upgrade 7.0.5 -> 7.1.0
python3-attrs: upgrade 22.1.0 -> 22.2.0
webkitgtk: upgrade 2.38.2 -> 2.38.3
linux-firmware: upgrade 20221109 -> 20221214
harfbuzz: upgrade 5.3.1 -> 6.0.0
python3-pytz: upgrade 2022.6 -> 2022.7
strace: upgrade 6.0 -> 6.1
python3-pycryptodome: upgrade 3.15.0 -> 3.16.0
meson: upgrade 0.64.0 -> 1.0.0
xwayland: upgrade 22.1.5 -> 22.1.7
python3-pyrsistent: upgrade 0.19.2 -> 0.19.3
file: upgrade 5.43 -> 5.44
python3-subunit: upgrade 1.4.1 -> 1.4.2
python3-zipp: upgrade 3.10.0 -> 3.11.0
python3-cryptography: upgrade 38.0.3 -> 38.0.4
logrotate: upgrade 3.20.1 -> 3.21.0
python3-importlib-metadata: upgrade 5.0.0 -> 5.2.0
python3-numpy: upgrade 1.23.4 -> 1.24.1
xserver-xorg: upgrade 21.1.4 -> 21.1.6
puzzles: upgrade to latest revision
vte: upgrade 0.70.1 -> 0.70.2
libpsl: upgrade 0.21.1 -> 0.21.2
libtest-fatal-perl: upgrade 0.016 -> 0.017
python3-urllib3: upgrade 1.26.12 -> 1.26.13
python3-cryptography-vectors: upgrade 38.0.3 -> 38.0.4
python3-setuptools: upgrade 65.5.1 -> 65.6.3
libsdl2: upgrade 2.26.0 -> 2.26.1
python3-gitdb: upgrade 4.0.9 -> 4.0.10
diffoscope: upgrade 224 -> 230
python3-mako: upgrade 1.2.3 -> 1.2.4
python3-sphinx: upgrade 5.3.0 -> 6.0.0
libsolv: upgrade 0.7.22 -> 0.7.23
ruby: upgrade 3.1.3 -> 3.2.0
python3-lxml: upgrade 4.9.1 -> 4.9.2
python3-git: upgrade 3.1.29 -> 3.1.30
curl: upgrade 7.86.0 -> 7.87.0
kmscube: upgrade to latest revision
gobject-introspection: upgrade 1.72.0 -> 1.74.0
python3-dtschema: upgrade 2022.11 -> 2022.12
bash: upgrade 5.2.9 -> 5.2.15
kexec-tools: upgrade 2.0.25 -> 2.0.26
python3-jsonschema: upgrade 4.17.0 -> 4.17.3
python3-pycairo: upgrade 1.21.0 -> 1.23.0
nghttp2: upgrade 1.50.0 -> 1.51.0
python3-certifi: upgrade 2022.9.24 -> 2022.12.7
python3-hypothesis: upgrade 6.57.1 -> 6.61.0
libsndfile1: upgrade 1.1.0 -> 1.2.0
repo: upgrade 2.29.9 -> 2.31
libpcap: upgrade 1.10.1 -> 1.10.2
python3-jsonschema: depend on rfc3339-validator in all cases
python3-strict-rfc3339: remove the recipe
elfutils: do not error out on deprecated declarations
gcr3: limit version check to 3.x versions without odd-even rule
ncurses: restore version check as it's now again working due to release of 6.4
tiff: update 4.4.0 -> 4.5.0
qemu: fix recent reproducibility issues
Alexey Smirnov (1):
classes: make TOOLCHAIN more permissive for kernel
Anton Antonov (1):
rust: Do not use default compiler flags defined in CC crate
Antonin Godard (2):
busybox: always start do_compile with orig config files
busybox: rm temporary files if do_compile was interrupted
Atanas Bunchev (1):
qemu.rst: slirp port forwarding details
Bruce Ashfield (30):
linux-yocto-dev: bump to v6.0+
linux-yocto/5.19: update to v5.19.16
linux-yocto/5.15: update to v5.15.74
linux-yocto/5.19: update to v5.19.17
linux-yocto/5.15: update to v5.15.76
linux-yocto/5.19: cfg: intel and vesa updates
kern-tools: integrate ZFS speedup patch
linux-yocto-dev: bump to v6.1
kernel-devsrc: fix for v6.1+
lttng-modules: fix build for v6.1+
linux-yocto/5.19: security.cfg: remove configs which have been dropped
linux-yocto/5.15: update to v5.15.78
linux-yocto/5.19: fix CONFIG_CRYPTO_CCM mismatch warnings
linux-yocto/5.15: fix CONFIG_CRYPTO_CCM mismatch warnings
linux-yocto/5.19: fix elfutils run-backtrace-native-core ptest failure
linux-libc-headers: add 6.x fetch location
linux-libc-headers: bump to 6.1
linux-yocto/5.19: fix perf build with clang
linux-yocto/5.15: ltp and squashfs fixes
linux-yocto: introduce v6.1 reference kernel recipes
linux-yocto/5.15: fix perf build with clang
linux-yocto/5.15: libbpf: Fix build warning on ref_ctr_off
linux-yocto/5.15: update to v5.15.84
linux-yocto/6.1: update to v6.1.1
linux-yocto/5.15: powerpc: Fix reschedule bug in KUAP-unlocked user copy
linux-yocto/5.19: powerpc: Fix reschedule bug in KUAP-unlocked user copy
linux-yocto/6.1: update to v6.1.3
linux-yocto/6.1: cfg: remove CONFIG_ARM_CRYPTO
yocto-bsps/5.15: update to v5.15.78
linux-yocto/5.15: update to v5.15.80
Carlos Alberto Lopez Perez (3):
xwayland: libxshmfence is needed when dri3 is enabled
recipes: Enable nativesdk for gperf, unifdef, gi-docgen and its dependencies
mesa-gl: gallium is required when enabling x11
Changqing Li (2):
base.bbclass: Fix way to check ccache path
sqlite3: upgrade 3.40.0 -> 3.40.1
Charlie Johnston (1):
opkg: ensure opkg uses private gpg.conf when applying keys.
Chee Yang Lee (1):
migration-guides: add release-notes for 4.1.1
Chen Qi (10):
kernel.bbclass: make KERNEL_DEBUG_TIMESTAMPS work at rebuild
resolvconf: make it work
dhcpcd: fix to work with systemd
bitbake: command.py: cleanup bb.cache.parse_recipe
psplash: consider the situation of psplash not exist for systemd
bc: extend to nativesdk
rm_work: adjust dependency to make do_rm_work_all depend on do_rm_work
selftest: allow '-R' and '-r' be used together
dhcpcd: backport two patches to fix runtime error
libseccomp: fix typo in DESCRIPTION
Christian Eggers (1):
boost: add url lib
David Bagonyi (1):
u-boot: Fix u-boot signing when building with multiple u-boot configs
Dmitry Baryshkov (2):
linux-firmware: upgrade 20221012 -> 20221109
linux-firmware: add new fw file to ${PN}-qcom-adreno-a530
Enguerrand de Ribaucourt (1):
bitbake-layers: fix a typo
Enrico Jörns (1):
sstatesig: emit more helpful error message when not finding sstate manifest
Enrico Scholz (1):
sstate: show progress bar again
Fabre Sébastien (1):
u-boot: Add /boot in SYSROOT_DIRS
Frank de Brabander (4):
bitbake: README: Improve explanation about running the testsuite
bitbake: bin/utils: Ensure locale en_US.UTF-8 is available on the system
bitbake: process: log odd unlink events with bitbake.sock
bitbake: README: add required python version for bitbake
Harald Seiler (1):
opkg: Set correct info_dir and status_file in opkg.conf
Jagadeesh Krishnanjanappa (1):
qemuboot.bbclass: make sure runqemu boots bundled initramfs kernel image
Jan Kircher (1):
toolchain-scripts: compatibility with unbound variable protection
Javier Tia (1):
poky.conf: Add Fedora 36 as supported distro
Joe Slater (2):
python3: Fix CVE-2022-37460
libarchive: fix CVE-2022-36227
Jose Quaresma (2):
Revert "gstreamer1.0: disable flaky gstbin:test_watch_for_state_change test"
gstreamer1.0: Fix race conditions in gstbin tests
Joshua Watt (4):
qemu-helper-native: Correctly pass program name as argv[0]
bitbake: cooker: Use event to terminate parser threads
bitbake: cooker: Start sync thread a little earlier
bitbake: bitbake: Convert to argparse
Kai Kang (4):
xorg-lib-common.inc: set default value of XORG_EXT
libx11-compose-data: 1.6.8 -> 1.8.3
libx11: 1.8.1 -> 1.8.3
libsm: 1.2.3 > 1.2.4
Kasper Revsbech (1):
bitbake: fetch2/wget: handle username/password in uri
Khem Raj (47):
rsync: Delete pedantic errors re-ordering patch
pseudo: Disable LFS on 32bit arches
libxkbcommon: Extend to build native package
iso-codes: Extend to build native packages
xkeyboard-config: Extend to build native package
bluez5: enable position independent executables flag
rpcsvc-proto: Use autoconf knob to enable largefile support
gptfdisk: Enable largefile support functions
libpcre2: Upgrade to 10.42
erofs-utils: Convert from off64_t to off_t
pseudo: Remove 64bit time_t flags
unfs3: Define off64_t in terms of off_t on musl
acpid: Fix largefile enabled build
efivar: Replace off64_t with off_t
ltp: Fix largefile support
acl: Enable largefile support by default
libpciaccess: Do not use 64bit functions for largefile support
mdadm: Use _FILE_OFFSET_BITS to use largefile support
btrfs-tools: Do not use 64bit functions for largefile support
e2fsprogs: Do not use 64bit functions for largefile support
libbsd: Fix build with largefile support
gpgme: Fix with with largefile support
virglrenderer: Replace lseek64 with lseek
nfs-utils: Replace statfs64 with statfs
alsa-utils: Replace off64_t with off_t
lttng-tools: Fix build with largefile support
strace: Add knob to enable largefile support
numactl: Enable largefile support
qemu: Fix build with largefile support
systemd: Fix 252 release build on musl
rust: Do not use open64 on musl in getrandom crate
rust,libstd-rs: Fix build with latest musl
rust-llvm: Fix build on latest musl
cargo: Do not use open64 on musl anymore
llvm: Do not use lseek64
strace: Replace off64_t with off_t in sync_file_range.c test
vulkan-samples: Do not use LFS64 APIs in spdlog
pulseaudio: Do not use 64bit time_t flags
musl: Update to latest on tip of trunk
rust: Fix build with 64bit time_t
stress-ng: Do not enforce gold linker
time64.inc: Add GLIBC_64BIT_TIME_FLAGS on ppc/x86 as well
time64: Remove leading whitespace from GLIBC_64BIT_TIME_FLAGS
mpg123: Enable largefile support
site/powerpc32-linux: Do not cache statvfs64 across glibc and musl
tiff: Add packageconfig knob for webp
site/common-musl: Set ac_cv_sys_file_offset_bits default to 64
Lee Chee Yang (1):
migration-guides: add release-notes for 4.0.6
Luca Boccassi (2):
systemd: refresh patch to remove fuzz introduced by rebase on v252
systemd: ship pcrphase/measure tools and units in systemd-extra-utils
Luis (1):
rm_work.bbclass: use HOSTTOOLS 'rm' binary exclusively
Marek Vasut (5):
bitbake: fetch2/git: Prevent git fetcher from fetching gitlab repository metadata
package_rpm: Fix Linux 6.1.0 perf 1.0 version mistranslation
systemd: Make importd depend on glib-2.0 again
bitbake: bitbake-user-manual: Document override :append, :prepend, :remove order
bitbake: fetch2/git: Clarify the meaning of namespace
Markus Volk (12):
ell: upgrade 0.53 -> 0.54
libsdl2: update 2.24.2 -> 2.26.0
graphene: import from meta-oe
gtk4: import recipe from meta-gnome
gcr: rename gcr -> gcr3
gcr: add recipe for gcr-4, needed to build with gtk4
epiphany: use gcr3
gtk4: add tracker-miners runtime dependency
python3-dbusmock: allow to build native
gtk4: update 4.8.2 -> 4.8.3
gcr3: update 3.40.0 -> 3.41.1
librsvg: enable vapi build
Marta Rybczynska (2):
efibootmgr: update compilation with musl
cve-update-db-native: avoid incomplete updates
Martin Jansa (4):
libxml2: upgrade test data from 20080827 to 20130923
nativesdk-rpm: export RPM_ETCCONFIGDIR and MAGIC in environment like RPM_CONFIGDIR
nativesdk-rpm: don't create wrappers for WRAPPER_TOOLS
tune-x86-64-v3.inc: set QEMU_EXTRAOPTIONS like other tune-* files
Mathieu Dubois-Briand (1):
dbus: Add missing CVE product name
Michael Halstead (1):
uninative: Upgrade to 3.8.1 to include libgcc
Michael Opdenacker (34):
manuals: add missing references to classes
manuals: fix paragraphs with the "inherit" word
ref-manual/classes.rst: remove reference to sip.bbclass
manuals: simplify .gitignore files
manuals: split dev-manual/common-tasks.rst
dev-manual/sbom.rst: minor corrections
bitbake: bitbake-user-manual: update references to Yocto Project manual
bitbake.conf: remove SERIAL_CONSOLE variable
bitbake: bitbake-user-manual: add reference to bitbake git repository
ref-manual: add references to variables only documented in the BitBake manual
manuals: add reference to yocto-docs git repository to page footer
manuals: add missing references to variables
manuals: add missing SPDX license header to source files
manuals: fix double colons
ref-manual/resources.rst: fix formating
ref-manual: update references to release notes
manual: improve documentation about using external toolchains
ref-manual/images.rst: fix unnumbered list
manuals: define proper numbered lists
manuals: final removal of SERIAL_CONSOLE variable
ref-manual/resources.rst: improve description of mailing lists
ref-manual/system-requirements.rst: update buildtools instructions
manuals: create references to buildtools
documentation/poky.yaml.in: update minimum python version to 3.8
manuals: prepare 4.2 migration notes
bitbake: bitbake-user-manual: double colon fix
bitbake: bitbake-user-manual: remove "OEBasic" signature generator
migration-guides: fix 4.2 migration note issues
toaster-manual: fix description of introduction video
ref-manual/classes.rst: remove .bbclass from section titles
manuals: simplify references to classes
migration-1.6.rst: fix redundant reference
ref-manual/system-requirements.rst: recommend buildtools for not supported distros
.gitignore: ignore files generated by Toaster
Mikko Rapeli (5):
qemurunner.py: support setting slirp host IP address
runqemu: limit slirp host port forwarding to localhost 127.0.0.1
qemurunner.py: use IP address from command line
dev-manual/runtime-testing.rst: fix oeqa runtime test path
runqemu: add QB_SETUP_CMD and QB_CLEANUP_CMD
Mingli Yu (8):
tcl: correct the header location in tcl.pc
python3: make tkinter available when enabled
sudo: add selinux and audit PACKAGECONFIG
iproute2: add selinux PACKAGECONFIG
util-linux: add selinux PACKAGECONFIG
cronie: add selinux PACKAGECONFIG
psmisc: add selinux PACKAGECONFIG
gcr: add opengl to REQUIRED_DISTRO_FEATURES
Narpat Mali (2):
ffmpeg: fix for CVE-2022-3964
ffmpeg: fix for CVE-2022-3965
Ola x Nilsson (4):
kbd: Don't build tests
glibc: Add ppoll fortify symbol for 64 bit time_t
insane: Add QA check for 32 bit time and file offset functions
time64.conf: Include to enable 64 bit time flags
Ovidiu Panait (1):
kernel.bbclass: remove empty module directories to prevent QA issues
Patrick Williams (1):
kernel-fitimage: reduce dependency to the cpio
Pavel Zhukov (1):
oeqa/rpm.py: Increase timeout and add debug output
Peter Kjellerstedt (1):
recipes, classes: Avoid adding extra whitespace to PACKAGESPLITFUNCS
Peter Marko (2):
externalsrc: fix lookup for .gitmodules
oeqa/selftest/externalsrc: add test for srctree_hash_files
Petr Kubizňák (1):
harfbuzz: remove bindir only if it exists
Petr Vorel (1):
iputils: update to 20221126
Polampalli, Archana (1):
libpam: fix CVE-2022-28321
Qiu, Zheng (3):
valgrind: remove most hidden tests for arm64
tiff: Security fix for CVE-2022-3970
vim: upgrade 9.0.0820 -> 9.0.0947
Quentin Schulz (4):
cairo: update patch for CVE-2019-6461 with upstream solution
cairo: fix CVE patches assigned wrong CVE number
docs: kernel-dev: faq: update tip on how to not include kernel in image
docs: migration-guides: migration-4.0: specify variable name change for kernel inclusion in image recipe
Randy MacLeod (1):
valgrind: skip the boost_thread test on arm
Ranjitsinh Rathod (1):
curl: Correct LICENSE from MIT-open-group to curl
Ravula Adhitya Siddartha (2):
linux-yocto/5.15: update genericx86* machines to v5.15.78
linux-yocto/5.19: update genericx86* machines to v5.19.17
Richard Purdie (97):
bitbake: cache/cookerdata: Move recipe parsing functions from cache to databuilder
bitbake: cache: Drop broken/unused code
bitbake: cache: Drop unused function
bitbake: server: Ensure cooker profiling works
bitbake: worker/runqueue: Reduce initial data transfer in workerdata
bitbake: cache: Drop support for not saving the cache file
bitbake: runqueue: Add further debug for sstate reuse issues
bitbake: runqueue: Fix race issues around hash equivalence and sstate reuse
bitbake: data/siggen: Switch to use frozensets and optimize
bitbake: data_smart: Add debugging for overrides stability issue
bitbake: utils: Allow to_boolean to support int values
base: Drop do_package base definition
bitbake: data: Drop obsolete pydoc/path code
bitbake: BBHandler: Remove pointless global variable declarations
bitbake: runqueue: Improve error message for missing multiconfig
bitbake: data_smart: Small cache reuse optimization
bitbake.conf: Simplify CACHE setting
oeqa/selftest/tinfoil: Add test for separate config_data with recipe_parse_file()
qemu: Ensure libpng dependency is deterministic
bitbake: data: Tweak code layout
bitbake: cache/siggen: Simplify passing basehash data into the cache
bitbake: siggen/cache: Optionally allow adding siggen hash data to the bitbake cache
bitbake: parse: Add support for addpylib conf file directive and BB_GLOBAL_PYMODULES
bitbake: cookerdata: Ensure layers use LAYERSERIES_COMPAT fairly
base: Switch to use addpylib directive and BB_GLOBAL_PYMODULES
devtool/friends: Use LAYERSERIES_CORENAMES when generating LAYERSERIES_COMPAT entries
scripts/checklayer: Update to match bitbake changes
yocto-check-layer: Allow OE-Core to be tested
bitbake: main: Add timestamp to server retry messages
bitbake: main/server: Add lockfile debugging upon server retry
poky/poky-tiny: Drop largefile mentions
lib/sstatesig: Drop OEBasic siggen
bitbake: siggen: Drop non-multiconfig aware siggen support
bitbake: build/siggen/runqueue: Drop do_setscene references
bitbake: bitbake: Bump minimum python version requirement to 3.8
sanity: Update minimum python version to 3.8
bitbake: main/process: Add extra sockname debugging
Revert "kernel-fitimage: reduce dependency to the cpio"
bitbake: siggen: Directly store datacaches reference
bitbake: bitbake: siggen/runqueue: Switch to using RECIPE_SIGGEN_INFO feature for signature dumping
bitbake: siggen: Add dummy dataCaches from task context/datastore
bitbake: build/siggen: Rework stamps functions
bitbake: siggen: Clarify which fn is meant
bitbake: ast/data/codeparser: Add dependencies from python module functions
bitbake: codeparser/data: Add vardepsexclude support to module dependency code
bitbake.conf: Add module function vardepsexclude entries
time64: Rename to a .inc file to match the others
bitbake: command: Add ping command
bitbake: cache: Allow compression of the data in SiggenRecipeInfo
bitbake: siggen: Minor code improvement
bitbake: server/process: Add bitbake.sock race handling
oeqa/concurrencytest: Add number of failures to summary output
python3-poetry-core: Fix determinism issue breaking reproducibility
bitbake: cache/siggen: Fix cache issues with signature handling
bitbake: event: builtins fix for 'd' deletion
bitbake: cooker: Ensure cache is cleared for partial resets
bitbake: tinfoil: Ensure CommandExit is handled
bitbake: cache: Drop reciever side counting for SiggenRecipeInfo
bitbake: knotty: Avoid looping with tracebacks
bitbake: event: Add enable/disable heartbeat code
bitbake: cooker/cookerdata: Rework the way the datastores are reset
bitbake: server/process: Improve exception and idle function logging
bitbake: command: Tweak finishAsyncCommand ordering to avoid races
bitbake: cooker: Ensure commands clean up any parser processes
bitbake: server/process: Improve idle loop exit code
bitbake: event: Always use threadlock
bitbake: server/process: Add locking around idle functions accesses
bitbake: server/process: Run idle commands in a separate idle thread
bitbake: knotty: Ping the server/cooker periodically
bitbake: cookerdata: Fix cache/reparsing issue
bitbake: cookerdata: Fix previous commit to use a string, not a generator
bitbake: command: Ensure that failure cases call finishAsyncComand
layer.conf: Update to use mickledore as the layer series name
layer.conf: Mark master as compatible with mickledore
bitbake: lib/bb: Update thread/process locks to use a timeout
package: Move fixup_perms function to bb function library
package: Move get_conffiles/files_from_filevars functions to lib
package: Move pkgdata handling functions to oe.packagedata
package: Move emit_pkgdata to packagedata.py
package: Move package functions to function library
package: Drop unused function and obsolete comment
package: Move mapping_rename_hook to packagedata function library
python3-cython: Use PACKAGESPLITFUNCS instead of PACKAGEBUILDPKGD
package: Drop support for PACKAGEBUILDPKGD function customisation
recipes/classes: Drop prepend/append usage with PACKAGESPLITFUNCS
bitbake: cooker: Rework the parsing results submission
bitbake: cooker: Clean up inotify idle handler
uninative-tarball: Add libgcc
patchelf: Add fix submitted upstream for uninative segfaults
bitbake: cooker/command: Drop async command handler indirection via cooker
bitbake: process/cooker/command: Fix currentAsyncCommand locking/races
uninative: Ensure uninative is enabled in all cases for BuildStarted event
qemux86-64: Reduce tuning to core2-64
bitbake: tinfoil: Don't wait for events indefinitely
bitbake: knotty: Improve shutdown handling
bitbake: cooker: Fix exit handling issues
bitbake: server/process: Move heartbeat to idle thread
Robert Andersson (1):
go-crosssdk: avoid host contamination by GOCACHE
Ross Burton (28):
build-appliance-image: Update to master head revision
lib/buildstats: fix parsing of trees with reduced_proc_pressure directories
combo-layer: remove unused import
combo-layer: dont use bb.utils.rename
combo-layer: add sync-revs command
libxml2: upgrade 2.9.14 -> 2.10.3
libxml2: add more testing
python3-packaging: upgrade to 22.0
python3-hatchling: remove python3-tomli DEPENDS
python3-cryptography: remove python3-tomli RDEPENDS
meson: drop redundant is_debianlike() patch
meson: always use meson subcommands
libepoxy: remove upstreamed patch
gtk+3: upgrade 3.24.34 -> 3.24.35
gtk+3: port to Meson
meson: no need to rebuild on install
at-spi2-core: clean up x11 enabling
at-spi2-core: disable API docs if x11 is disabled
gtk+3: fix reproducible builds
lsof: upgrade 4.96.4 -> 4.96.5
pango: upgrade 1.50.11 -> 1.50.12
python3-hatch-vcs: upgrade 0.2.0 -> 0.3.0
python3-hatchling: upgrade 1.11.1 -> 1.12.1
python3-pathspec: upgrade 0.10.1 -> 0.10.3
rm_work: handle non-existant stamps directory
oeqa/selftest/debuginfod: improve testcase
elfutils: disable deprecation errors in all builds, not just native
curl: don't enable debug builds
Ryan Eatmon (1):
go: Update reproducibility patch to fix panic errors
Sandeep Gundlupet Raju (3):
libdrm: Remove libdrm-kms package
kernel-fitimage: Adjust order of dtb/dtbo files
kernel-fitimage: Allow user to select dtb when multiple dtb exists
Saul Wold (1):
at: Change when files are copied
Sergei Zhmylev (1):
oeqa/qemurunner: implement vmdk images support
Tim Orling (7):
python3-hypothesis: upgrade 6.56.4 -> 6.57.1
at-spi2-core: upgrade 2.44.1 -> 2.46.0
mirrors.bbclass: update CPAN_MIRROR
libtry-tiny-perl: add recipe for 0.31
libtest-fatal-perl: add recipe for 0.016
libtest-warnings-perl: move from meta-perl
liburi-perl: upgrade 5.08 -> 5.17
Trevor Woerner (1):
local.conf.sample: update bbclass locations
Vincent Davis Jr (1):
mesa: enable glvnd support
Wang Mingyu (49):
btrfs-tools: upgrade 6.0 -> 6.0.1
libpipeline: upgrade 1.5.6 -> 1.5.7
btrfs-tools: upgrade 6.0.1 -> 6.0.2
bind: upgrade 9.18.8 -> 9.18.9
ccache: upgrade 4.7.2 -> 4.7.4
dropbear: upgrade 2022.82 -> 2022.83
libinput: upgrade 1.21.0 -> 1.22.0
libxft: upgrade 2.3.6 -> 2.3.7
mpfr: upgrade 4.1.0 -> 4.1.1
glib-2.0: upgrade 2.74.1 -> 2.74.3
libxcrypt-compat: upgrade 4.4.30 -> 4.4.33
patchelf: upgrade 0.16.1 -> 0.17.0
pciutils: upgrade 3.8.0 -> 3.9.0
shaderc: upgrade 2022.3 -> 2022.4
sqlite3: upgrade 3.39.4 -> 3.40.0
stress-ng: upgrade 0.14.06 -> 0.15.00
swig: upgrade 4.1.0 -> 4.1.1
texinfo: upgrade 7.0 -> 7.0.1
usbutils: upgrade 014 -> 015
xz: upgrade 5.2.7 -> 5.2.9
wayland-protocols: upgrade 1.28 -> 1.31
gnu-config: upgrade to latest revision
libfontenc: upgrade 1.1.6 -> 1.1.7
libpcre2: upgrade 10.40 -> 10.41
libpng: upgrade 1.6.38 -> 1.6.39
libxau: upgrade 1.0.10 -> 1.0.11
libxkbfile: upgrade 1.1.1 -> 1.1.2
libxshmfence: upgrade 1.3.1 -> 1.3.2
xrandr: upgrade 1.5.1 -> 1.5.2
boost: upgrade 1.80.0 -> 1.81.0
ell: upgrade 0.54 -> 0.55
git: upgrade 2.38.1 -> 2.39.0
help2man: upgrade 1.49.2 -> 1.49.3
iproute2: upgrade 6.0.0 -> 6.1.0
libmpc: upgrade 1.2.1 -> 1.3.1
makedepend: upgrade 1.0.7 -> 1.0.8
psmisc: upgrade 23.5 -> 23.6
xz: upgrade 5.2.9 -> 5.4.0
gstreamer1.0: upgrade 1.20.4 -> 1.20.5
bind: upgrade 9.18.9 -> 9.18.10
btrfs-tools: upgrade 6.0.2 -> 6.1
librepo: upgrade 1.14.5 -> 1.15.1
libsdl2: upgrade 2.26.1 -> 2.26.2
libva-utils: upgrade 2.17.0 -> 2.17.1
libxkbcommon: upgrade 1.4.1 -> 1.5.0
mpfr: upgrade 4.1.1 -> 4.2.0
dpkg: upgrade 1.21.13 -> 1.21.17
rxvt-unicode: upgrade 9.30 -> 9.31
virglrenderer: upgrade 0.10.3 -> 0.10.4
Xiangyu Chen (3):
grub: backport patches to fix CVE-2022-28736
openssh: remove RRECOMMENDS to rng-tools for sshd package
grub2: backport patch to fix CVE-2022-2601 CVE-2022-3775
Yoann Congal (2):
bitbake: Group and reorder options in bitbake help
bitbake: main: Move --buildfile help at the end of "Execution" group
leimaohui (1):
libpng: Enable NEON for aarch64 to enensure consistency with arm32.
pgowda (1):
binutils: Add patch to fix CVE-2022-4285
张忠山 (1):
bitbake: data_smart: Use regex consistently for override matching
meta-raspberrypi: 93dadf336c..896566aa92:
Carlos Alberto Lopez Perez (1):
weston: disablepackageconfig options that fail to build with userland drivers
Khem Raj (2):
lirc: Drop upstreamed patch
linux-raspberrypi.inc: Weakly assign COMPATIBLE_MACHINE
Martin Jansa (2):
bluez5: update patches to apply on 5.66 version
layer.conf: update LAYERSERIES_COMPAT for mickledore
Vincent Davis Jr (5):
rpidistro-vlc,rpidistro-ffmpeg: update COMPATIBLE_HOST regex
rpidistro-vlc: upgrade 3.0.12 -> 3.0.17
rpi-default-providers: add libav and libpostproc
rpidistro-ffmpeg: upgrade 4.3.2 -> 4.3.4
rpidistro-ffmpeg: remove --enable-v4l2-request flag
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ied8537beedde0f83790e6e3595057db45f408107
diff --git a/poky/documentation/dev-manual/start.rst b/poky/documentation/dev-manual/start.rst
index 63d63fc..498734a 100644
--- a/poky/documentation/dev-manual/start.rst
+++ b/poky/documentation/dev-manual/start.rst
@@ -29,7 +29,7 @@
You can build off these steps and customize the procedure to fit any
particular working environment and set of practices.
-1. *Determine Who is Going to be Developing:* You first need to
+#. *Determine Who is Going to be Developing:* You first need to
understand who is going to be doing anything related to the Yocto
Project and determine their roles. Making this determination is
essential to completing subsequent steps, which are to get your
@@ -52,7 +52,7 @@
automated tests that are used to ensure all application and core
system development meets desired quality standards.
-2. *Gather the Hardware:* Based on the size and make-up of the team,
+#. *Gather the Hardware:* Based on the size and make-up of the team,
get the hardware together. Ideally, any development, build, or test
engineer uses a system that runs a supported Linux distribution.
These systems, in general, should be high performance (e.g. dual,
@@ -66,13 +66,13 @@
building Yocto Project development containers to be run under
Docker, which is described later.
-3. *Understand the Hardware Topology of the Environment:* Once you
+#. *Understand the Hardware Topology of the Environment:* Once you
understand the hardware involved and the make-up of the team, you
can understand the hardware topology of the development environment.
You can get a visual idea of the machines and their roles across the
development environment.
-4. *Use Git as Your Source Control Manager (SCM):* Keeping your
+#. *Use Git as Your Source Control Manager (SCM):* Keeping your
:term:`Metadata` (i.e. recipes,
configuration files, classes, and so forth) and any software you are
developing under the control of an SCM system that is compatible
@@ -109,7 +109,7 @@
Documentation on how to create interfaces and frontends for
Git.
-5. *Set up the Application Development Machines:* As mentioned earlier,
+#. *Set up the Application Development Machines:* As mentioned earlier,
application developers are creating applications on top of existing
software stacks. Following are some best practices for setting up
machines used for application development:
@@ -128,7 +128,7 @@
- Use multiple toolchains installed locally into different
locations to allow development across versions.
-6. *Set up the Core Development Machines:* As mentioned earlier, core
+#. *Set up the Core Development Machines:* As mentioned earlier, core
developers work on the contents of the operating system itself.
Following are some best practices for setting up machines used for
developing images:
@@ -145,7 +145,7 @@
- Share layers amongst the developers of a particular project and
contain the policy configuration that defines the project.
-7. *Set up an Autobuilder:* Autobuilders are often the core of the
+#. *Set up an Autobuilder:* Autobuilders are often the core of the
development environment. It is here that changes from individual
developers are brought together and centrally tested. Based on this
automated build and test environment, subsequent decisions about
@@ -183,12 +183,12 @@
- Allows scheduling of builds so that resources can be used
efficiently.
-8. *Set up Test Machines:* Use a small number of shared, high
+#. *Set up Test Machines:* Use a small number of shared, high
performance systems for testing purposes. Developers can use these
systems for wider, more extensive testing while they continue to
develop locally using their primary development system.
-9. *Document Policies and Change Flow:* The Yocto Project uses a
+#. *Document Policies and Change Flow:* The Yocto Project uses a
hierarchical structure and a pull model. There are scripts to create and
send pull requests (i.e. ``create-pull-request`` and
``send-pull-request``). This model is in line with other open source
@@ -213,7 +213,7 @@
possible. Chances are if you have discovered the need for changes,
someone else in the community needs them also.
-10. *Development Environment Summary:* Aside from the previous steps,
+#. *Development Environment Summary:* Aside from the previous steps,
here are best practices within the Yocto Project development
environment:
@@ -223,7 +223,7 @@
- Maintain your Metadata in layers that make sense for your
situation. See the ":ref:`overview-manual/yp-intro:the yocto project layer model`"
section in the Yocto Project Overview and Concepts Manual and the
- ":ref:`dev-manual/common-tasks:understanding and creating layers`"
+ ":ref:`dev-manual/layers:understanding and creating layers`"
section for more information on layers.
- Separate the project's Metadata and code by using separate Git
@@ -247,13 +247,13 @@
project to fix bugs or add features. If you do submit patches,
follow the project commit guidelines for writing good commit
messages. See the
- ":ref:`dev-manual/common-tasks:submitting a change to the yocto project`"
+ ":ref:`dev-manual/changes:submitting a change to the yocto project`"
section.
- Send changes to the core sooner than later as others are likely
to run into the same issues. For some guidance on mailing lists
to use, see the list in the
- ":ref:`dev-manual/common-tasks:submitting a change to the yocto project`"
+ ":ref:`dev-manual/changes:submitting a change to the yocto project`"
section. For a description
of the available mailing lists, see the ":ref:`resources-mailinglist`" section in
the Yocto Project Reference Manual.
@@ -296,7 +296,7 @@
Follow these steps to prepare a native Linux machine as your Yocto
Project Build Host:
-1. *Use a Supported Linux Distribution:* You should have a reasonably
+#. *Use a Supported Linux Distribution:* You should have a reasonably
current Linux-based host system. You will have the best results with
a recent release of Fedora, openSUSE, Debian, Ubuntu, RHEL or CentOS
as these releases are frequently tested against the Yocto Project and
@@ -306,10 +306,10 @@
section in the Yocto Project Reference Manual and the wiki page at
:yocto_wiki:`Distribution Support </Distribution_Support>`.
-2. *Have Enough Free Memory:* Your system should have at least 50 Gbytes
+#. *Have Enough Free Memory:* Your system should have at least 50 Gbytes
of free disk space for building images.
-3. *Meet Minimal Version Requirements:* The OpenEmbedded build system
+#. *Meet Minimal Version Requirements:* The OpenEmbedded build system
should be able to run on any modern distribution that has the
following versions for Git, tar, Python, gcc and make.
@@ -329,7 +329,7 @@
":ref:`ref-manual/system-requirements:required git, tar, python, make and gcc versions`"
section in the Yocto Project Reference Manual for information.
-4. *Install Development Host Packages:* Required development host
+#. *Install Development Host Packages:* Required development host
packages vary depending on your build host and what you want to do
with the Yocto Project. Collectively, the number of required packages
is large if you want to be able to cover all cases.
@@ -361,7 +361,7 @@
Follow these general steps to prepare a Windows, Mac, or Linux machine
as your Yocto Project build host:
-1. *Determine What Your Build Host Needs:*
+#. *Determine What Your Build Host Needs:*
`Docker <https://www.docker.com/what-docker>`__ is a software
container platform that you need to install on the build host.
Depending on your build host, you might have to install different
@@ -370,20 +370,20 @@
Platforms <https://docs.docker.com/engine/install/#supported-platforms>`__"
your build host needs to run containers.
-2. *Choose What To Install:* Depending on whether or not your build host
+#. *Choose What To Install:* Depending on whether or not your build host
meets system requirements, you need to install "Docker CE Stable" or
the "Docker Toolbox". Most situations call for Docker CE. However, if
you have a build host that does not meet requirements (e.g.
Pre-Windows 10 or Windows 10 "Home" version), you must install Docker
Toolbox instead.
-3. *Go to the Install Site for Your Platform:* Click the link for the
+#. *Go to the Install Site for Your Platform:* Click the link for the
Docker edition associated with your build host's native software. For
example, if your build host is running Microsoft Windows Version 10
and you want the Docker CE Stable edition, click that link under
"Supported Platforms".
-4. *Install the Software:* Once you have understood all the
+#. *Install the Software:* Once you have understood all the
pre-requisites, you can download and install the appropriate
software. Follow the instructions for your specific machine and the
type of the software you need to install:
@@ -412,15 +412,15 @@
Ubuntu <https://docs.docker.com/engine/install/ubuntu/>`__
for Linux build hosts running the Ubuntu distribution.
-5. *Optionally Orient Yourself With Docker:* If you are unfamiliar with
+#. *Optionally Orient Yourself With Docker:* If you are unfamiliar with
Docker and the container concept, you can learn more here -
https://docs.docker.com/get-started/.
-6. *Launch Docker or Docker Toolbox:* You should be able to launch
+#. *Launch Docker or Docker Toolbox:* You should be able to launch
Docker or the Docker Toolbox and have a terminal shell on your
development host.
-7. *Set Up the Containers to Use the Yocto Project:* Go to
+#. *Set Up the Containers to Use the Yocto Project:* Go to
https://github.com/crops/docker-win-mac-docs/wiki and follow
the directions for your particular build host (i.e. Linux, Mac, or
Windows).
@@ -453,7 +453,7 @@
Follow these general steps to prepare a Windows machine using WSL 2 as
your Yocto Project build host:
-1. *Make sure your Windows machine is capable of running WSL 2:*
+#. *Make sure your Windows machine is capable of running WSL 2:*
While all Windows 11 and Windows Server 2022 builds support WSL 2,
the first versions of Windows 10 and Windows Server 2019 didn't.
@@ -469,7 +469,7 @@
Microsoft Windows [Version 10.0.19041.153]
-2. *Install the Linux distribution of your choice inside WSL 2:*
+#. *Install the Linux distribution of your choice inside WSL 2:*
Once you know your version of Windows supports WSL 2, you can
install the distribution of your choice from the Microsoft Store.
Open the Microsoft Store and search for Linux. While there are
@@ -479,7 +479,7 @@
making your selection, simply click "Get" to download and install the
distribution.
-3. *Check which Linux distribution WSL 2 is using:* Open a Windows
+#. *Check which Linux distribution WSL 2 is using:* Open a Windows
PowerShell and run::
C:\WINDOWS\system32> wsl -l -v
@@ -489,13 +489,13 @@
Note that WSL 2 supports running as many different Linux distributions
as you want to install.
-4. *Optionally Get Familiar with WSL:* You can learn more on
+#. *Optionally Get Familiar with WSL:* You can learn more on
https://docs.microsoft.com/en-us/windows/wsl/wsl2-about.
-5. *Launch your WSL Distibution:* From the Windows start menu simply
+#. *Launch your WSL Distibution:* From the Windows start menu simply
launch your WSL distribution just like any other application.
-6. *Optimize your WSL 2 storage often:* Due to the way storage is
+#. *Optimize your WSL 2 storage often:* Due to the way storage is
handled on WSL 2, the storage space used by the underlying Linux
distribution is not reflected immediately, and since BitBake heavily
uses storage, after several builds, you may be unaware you are
@@ -597,14 +597,14 @@
Use the following procedure to locate the latest upstream copy of the
``poky`` Git repository:
-1. *Access Repositories:* Open a browser and go to
+#. *Access Repositories:* Open a browser and go to
:yocto_git:`/` to access the GUI-based interface into the
Yocto Project source repositories.
-2. *Select the Repository:* Click on the repository in which you are
+#. *Select the Repository:* Click on the repository in which you are
interested (e.g. ``poky``).
-3. *Find the URL Used to Clone the Repository:* At the bottom of the
+#. *Find the URL Used to Clone the Repository:* At the bottom of the
page, note the URL used to clone that repository
(e.g. :yocto_git:`/poky`).
@@ -630,7 +630,7 @@
Follow these steps to locate and download a particular tarball:
-1. *Access the Index of Releases:* Open a browser and go to
+#. *Access the Index of Releases:* Open a browser and go to
:yocto_dl:`Index of Releases </releases>`. The
list represents released components (e.g. ``bitbake``, ``sato``, and
so on).
@@ -642,14 +642,14 @@
historically used for very early releases and exists now only for
retroactive completeness.
-2. *Select a Component:* Click on any released component in which you
+#. *Select a Component:* Click on any released component in which you
are interested (e.g. ``yocto``).
-3. *Find the Tarball:* Drill down to find the associated tarball. For
+#. *Find the Tarball:* Drill down to find the associated tarball. For
example, click on ``yocto-&DISTRO;`` to view files associated with the
Yocto Project &DISTRO; release.
-4. *Download the Tarball:* Click the tarball to download and save a
+#. *Download the Tarball:* Click the tarball to download and save a
snapshot of the given component.
Using the Downloads Page
@@ -661,13 +661,13 @@
tarballs similar to the tarballs located in the Index of Releases
described in the ":ref:`dev-manual/start:accessing index of releases`" section.
-1. *Go to the Yocto Project Website:* Open The
+#. *Go to the Yocto Project Website:* Open The
:yocto_home:`Yocto Project Website <>` in your browser.
-2. *Get to the Downloads Area:* Select the "DOWNLOADS" item from the
+#. *Get to the Downloads Area:* Select the "DOWNLOADS" item from the
pull-down "SOFTWARE" tab menu near the top of the page.
-3. *Select a Yocto Project Release:* Use the menu next to "RELEASE" to
+#. *Select a Yocto Project Release:* Use the menu next to "RELEASE" to
display and choose a recent or past supported Yocto Project release
(e.g. &DISTRO_NAME_NO_CAP;, &DISTRO_NAME_NO_CAP_MINUS_ONE;, and so forth).
@@ -679,7 +679,7 @@
You can use the "RELEASE ARCHIVE" link to reveal a menu of all Yocto
Project releases.
-4. *Download Tools or Board Support Packages (BSPs):* From the
+#. *Download Tools or Board Support Packages (BSPs):* From the
"DOWNLOADS" page, you can download tools or BSPs as well. Just scroll
down the page and look for what you need.
@@ -707,10 +707,10 @@
Follow these steps to create a local version of the upstream
:term:`Poky` Git repository.
-1. *Set Your Directory:* Change your working directory to where you want
+#. *Set Your Directory:* Change your working directory to where you want
to create your local copy of ``poky``.
-2. *Clone the Repository:* The following example command clones the
+#. *Clone the Repository:* The following example command clones the
``poky`` repository and uses the default name "poky" for your local
repository::
@@ -766,13 +766,13 @@
Further development on top of the branch that occurs after check it
out can occur.
-1. *Switch to the Poky Directory:* If you have a local poky Git
+#. *Switch to the Poky Directory:* If you have a local poky Git
repository, switch to that directory. If you do not have the local
copy of poky, see the
":ref:`dev-manual/start:cloning the \`\`poky\`\` repository`"
section.
-2. *Determine Existing Branch Names:*
+#. *Determine Existing Branch Names:*
::
$ git branch -a
@@ -793,7 +793,7 @@
remotes/origin/zeus-next
... and so on ...
-3. *Check out the Branch:* Check out the development branch in which you
+#. *Check out the Branch:* Check out the development branch in which you
want to work. For example, to access the files for the Yocto Project
&DISTRO; Release (&DISTRO_NAME;), use the following command::
@@ -827,19 +827,19 @@
Checking out a branch based on a tag gives you a stable set of files
not affected by development on the branch above the tag.
-1. *Switch to the Poky Directory:* If you have a local poky Git
+#. *Switch to the Poky Directory:* If you have a local poky Git
repository, switch to that directory. If you do not have the local
copy of poky, see the
":ref:`dev-manual/start:cloning the \`\`poky\`\` repository`"
section.
-2. *Fetch the Tag Names:* To checkout the branch based on a tag name,
+#. *Fetch the Tag Names:* To checkout the branch based on a tag name,
you need to fetch the upstream tags into your local repository::
$ git fetch --tags
$
-3. *List the Tag Names:* You can list the tag names now::
+#. *List the Tag Names:* You can list the tag names now::
$ git tag
1.1_M1.final
@@ -861,7 +861,7 @@
yocto_1.5_M5.rc8
-4. *Check out the Branch:*
+#. *Check out the Branch:*
::
$ git checkout tags/yocto-&DISTRO; -b my_yocto_&DISTRO;