Update kernel to openbmc-20160127-1
This includes a prototype of the mtd and occ hwmon drivers. They are not
ready for upstream, but are able to be tested.
Signed-off-by: Joel Stanley <joel@jms.id.au>
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg
deleted file mode 100644
index 0f96507..0000000
--- a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SENSORS_OCC=y
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.dts b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.dts
deleted file mode 100644
index 3b5e0f1..0000000
--- a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.dts
+++ /dev/null
@@ -1 +0,0 @@
-# use in-tree devtree
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
deleted file mode 100644
index 612214d..0000000
--- a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
+++ /dev/null
@@ -1,1565 +0,0 @@
-diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
-index e13c902..38aff0c 100644
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -1167,6 +1167,13 @@ config SENSORS_NCT7904
- This driver can also be built as a module. If so, the module
- will be called nct7904.
-
-+config SENSORS_OCC
-+ tristate "OCC sensor driver for IBM Power CPU"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for driver to read sensors in
-+ IBM Power CPU On-Chip-Controller. module will be called occ.
-+
- config SENSORS_PCF8591
- tristate "Philips PCF8591 ADC/DAC"
- depends on I2C
-diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
-index 9e0f3dd..53dc3b3 100644
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
- obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
- obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
- obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
-+obj-$(CONFIG_SENSORS_OCC) += occ.o
- obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
- obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
- obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
-diff --git a/drivers/hwmon/occ.c b/drivers/hwmon/occ.c
-new file mode 100644
-index 0000000..f265ff3
---- /dev/null
-+++ b/drivers/hwmon/occ.c
-@@ -0,0 +1,1529 @@
-+/*
-+ * Open BMC OCC HWMON driver - read Power8 OCC (On Chip Controller) sensor data via i2c.
-+ *
-+ * Copyright (c) 2015 IBM (Alvin Wang, Li Yi)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/jiffies.h>
-+#include <linux/i2c.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/err.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/delay.h>
-+
-+//#define DEBUG 1
-+
-+/* ------------------------------------------------------------*/
-+/* OCC sensor data format */
-+typedef struct {
-+ uint16_t sensor_id;
-+ uint16_t value;
-+} occ_sensor;
-+
-+typedef struct {
-+ uint16_t sensor_id;
-+ uint32_t update_tag;
-+ uint32_t accumulator;
-+ uint16_t value;
-+} powr_sensor;
-+
-+typedef struct {
-+ uint16_t curr_powercap;
-+ uint16_t curr_powerreading;
-+ uint16_t norm_powercap;
-+ uint16_t max_powercap;
-+ uint16_t min_powercap;
-+ uint16_t user_powerlimit;
-+} caps_sensor;
-+
-+typedef struct {
-+ char sensor_type[5];
-+ uint8_t reserved0;
-+ uint8_t sensor_format;
-+ uint8_t sensor_length;
-+ uint8_t num_of_sensors;
-+ occ_sensor *sensor;
-+ powr_sensor *powr;
-+ caps_sensor *caps;
-+} sensor_data_block;
-+
-+typedef struct {
-+ uint8_t status;
-+ uint8_t ext_status;
-+ uint8_t occs_present;
-+ uint8_t config;
-+ uint8_t occ_state;
-+ uint8_t reserved0;
-+ uint8_t reserved1;
-+ uint8_t error_log_id;
-+ uint32_t error_log_addr_start;
-+ uint16_t error_log_length;
-+ uint8_t reserved2;
-+ uint8_t reserved3;
-+ char occ_code_level[17];
-+ char sensor_eye_catcher[7];
-+ uint8_t num_of_sensor_blocks;
-+ uint8_t sensor_data_version;
-+ sensor_data_block* blocks;
-+} occ_poll_data;
-+
-+typedef struct {
-+ uint8_t sequence_num;
-+ uint8_t cmd_type;
-+ uint8_t rtn_status;
-+ uint16_t data_length;
-+ occ_poll_data data;
-+ uint16_t chk_sum;
-+ int temp_block_id;
-+ int freq_block_id;
-+ int power_block_id;
-+ int caps_block_id;
-+} occ_response_t;
-+
-+//static occ_response_t occ_resp;
-+
-+/* Each client has this additional data */
-+struct occ_drv_data {
-+ struct i2c_client *client;
-+ struct device *hwmon_dev;
-+ struct mutex update_lock;
-+ char valid; /* !=0 if sensor data are valid */
-+ unsigned long last_updated; /* In jiffies */
-+ unsigned long sample_time; /* Mininum timer interval for sampling In jiffies */
-+ occ_response_t occ_resp;
-+};
-+
-+/*-----------------------------------------------------------------------*/
-+/* i2c read and write occ sensors */
-+
-+#define OCC_DATA_MAX 4096 /* 4KB at most */
-+#define I2C_STATUS_REG 0x000d0001
-+#define I2C_ERROR_REG 0x000d0002
-+#define I2C_READ_ERROR 1
-+#define I2C_WRITE_ERROR 2
-+#define I2C_DATABUFFER_SIZE_ERROR 3
-+
-+/*
-+#define SCOM_OCC_SRAM_WOX 0x0006B013
-+#define SCOM_OCC_SRAM_WAND 0x0006B012
-+#define SCOM_OCC_SRAM_ADDR 0x0006B010
-+#define SCOM_OCC_SRAM_DATA 0x0006B015
-+*/
-+
-+// To generate attn to OCC
-+#define ATTN_DATA 0x0006B035
-+
-+// For BMC to read/write SRAM
-+#define OCB_ADDRESS 0x0006B070
-+#define OCB_DATA 0x0006B075
-+#define OCB_STATUS_CONTROL_AND 0x0006B072
-+#define OCB_STATUS_CONTROL_OR 0x0006B073
-+
-+#define OCC_COMMAND_ADDR 0xFFFF6000
-+#define OCC_RESPONSE_ADDR 0xFFFF7000
-+
-+static int deinit_occ_resp_buf(occ_response_t *p)
-+{
-+ int b;
-+
-+ if (p == NULL)
-+ return 0;
-+
-+ if (p->data.blocks == NULL)
-+ return 0;
-+
-+ for(b = 0; b < p->data.num_of_sensor_blocks; b++) {
-+ if (!p->data.blocks[b].sensor)
-+ kfree(p->data.blocks[b].sensor);
-+ if (!p->data.blocks[b].powr)
-+ kfree(p->data.blocks[b].powr);
-+ if (!p->data.blocks[b].caps)
-+ kfree(p->data.blocks[b].caps);
-+ }
-+
-+ kfree(p->data.blocks);
-+
-+ memset(p, 0, sizeof(*p));
-+
-+
-+ return 0;
-+}
-+
-+static ssize_t occ_i2c_read(struct i2c_client *client, char *buf, size_t count)
-+{
-+ int ret = 0;
-+
-+ if (count > 8192)
-+ count = 8192;
-+
-+ //printk("i2c_read: reading %zu bytes @0x%x.\n", count, client->addr);
-+ ret = i2c_master_recv(client, buf, count);
-+ return ret;
-+}
-+
-+static ssize_t occ_i2c_write(struct i2c_client *client, const char *buf, size_t count)
-+{
-+ int ret = 0;
-+
-+ if (count > 8192)
-+ count = 8192;
-+
-+ //printk("i2c_write: writing %zu bytes @0x%x.\n", count, client->addr);
-+ ret = i2c_master_send(client, buf, count);
-+ return ret;
-+}
-+
-+/* read two 4-byte value */
-+static int occ_getscom(struct i2c_client *client, uint32_t address, uint32_t *value0, uint32_t *value1)
-+{
-+ uint32_t ret = 0;
-+ char buf[8];
-+ const char* address_buf = (const char*)&address;
-+
-+ //P8 i2c slave requires address to be shifted by 1
-+ address = address << 1;
-+
-+ ret = occ_i2c_write(client, address_buf, sizeof(address));
-+ /* FIXME: ast i2c driver does not read corret value */
-+ //if (ret != sizeof(address))
-+ // return -I2C_WRITE_ERROR;
-+
-+ ret = occ_i2c_read(client, buf, sizeof(buf));
-+ //if (ret != sizeof(buf))
-+ // return -I2C_READ_ERROR;
-+
-+ memcpy(value1, &buf[0], sizeof(*value1));
-+ memcpy(value0, &buf[4], sizeof(*value0));
-+
-+ return 0;
-+}
-+
-+/* read 8-byte value and put into data[offset] */
-+static int occ_getscomb(struct i2c_client *client, uint32_t address, char* data, int offset)
-+{
-+ uint32_t ret = 0;
-+ const char* address_buf = (const char*)&address;
-+ char buf[8];
-+ int b = 0;
-+
-+ //P8 i2c slave requires address to be shifted by 1
-+ address = address << 1;
-+
-+ ret = occ_i2c_write(client, address_buf, sizeof(address));
-+ //if (ret != sizeof(address))
-+ // return -I2C_WRITE_ERROR;
-+
-+ ret = occ_i2c_read(client, buf, sizeof(buf));
-+ //if (ret != sizeof(buf))
-+ // return -I2C_READ_ERROR;
-+
-+ for (b = 0; b < 8; b++) {
-+ data[offset + b] = buf[7 - b];
-+ }
-+
-+ return 0;
-+}
-+
-+static int occ_putscom(struct i2c_client *client, uint32_t address, uint32_t data0, uint32_t data1)
-+{
-+ const char* address_buf = (const char*)&address;
-+ const char* d0 = (const char*)&data0;
-+ const char* d1 = (const char*)&data1;
-+ char buf[12];
-+ uint32_t ret = 0;
-+
-+ //P8 i2c slave requires address to be shifted by 1
-+ address = address << 1;
-+
-+ memcpy(&buf[0], address_buf, sizeof(address));
-+ memcpy(&buf[4], d1, sizeof(data1));
-+ memcpy(&buf[8], d0, sizeof(data0));
-+
-+ ret = occ_i2c_write(client, buf, sizeof(buf));
-+ //if (ret != sizeof(buf))
-+ // return I2C_WRITE_ERROR;
-+
-+ return 0;
-+}
-+
-+static int occ_check_i2c_errors(struct i2c_client *client)
-+{
-+ uint32_t v0;
-+ uint32_t v1;
-+
-+ occ_getscom(client, I2C_STATUS_REG, &v0, &v1);
-+ if (v0 != 0x80000000) {
-+ printk("ERROR present in P8 I2C Slave. Clearing...\n");
-+ occ_putscom(client, I2C_ERROR_REG, 0x00000000, 0x00000000);
-+ occ_putscom(client, I2C_STATUS_REG, 0x00000000, 0x00000000);
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static inline uint16_t get_occdata_length(char* d)
-+{
-+ uint16_t data_length = 0;
-+
-+ data_length = d[3] << 8;
-+ data_length = data_length | d[4];
-+ return data_length;
-+}
-+
-+
-+static int parse_occ_response(char* d, occ_response_t* o)
-+{
-+ int b = 0;
-+ int s = 0;
-+ int ret = 0;
-+ int dnum = 45;
-+
-+ o->sequence_num = d[0];
-+ o->cmd_type = d[1];
-+ o->rtn_status = d[2];
-+ o->data_length = d[3] << 8;
-+ o->data_length = o->data_length | d[4];
-+ o->data.status = d[5];
-+ o->data.ext_status = d[6];
-+ o->data.occs_present = d[7];
-+ o->data.config = d[8];
-+ o->data.occ_state = d[9];
-+ o->data.reserved0 = d[10];
-+ o->data.reserved1 = d[11];
-+ o->data.error_log_id = d[12];
-+ o->data.error_log_addr_start = d[13] << 24;
-+ o->data.error_log_addr_start = o->data.error_log_addr_start | d[14] << 16;
-+ o->data.error_log_addr_start = o->data.error_log_addr_start | d[15] << 8;
-+ o->data.error_log_addr_start = o->data.error_log_addr_start | d[16];
-+ o->data.error_log_length = d[17] << 8;
-+ o->data.error_log_length = o->data.error_log_length | d[18];
-+ o->data.reserved2 = d[19];
-+ o->data.reserved3 = d[20];
-+ strncpy(&o->data.occ_code_level[0], (const char*)&d[21], 16);
-+ strncpy(&o->data.sensor_eye_catcher[0], (const char*)&d[37], 6);
-+ o->data.sensor_eye_catcher[6]='\0';
-+ o->data.num_of_sensor_blocks=d[43];
-+ o->data.sensor_data_version = d[44];
-+
-+ if (strcmp(o->data.sensor_eye_catcher, "SENSOR") != 0) {
-+ printk("ERROR: SENSOR not found at byte 37 (%s)\n",o->data.sensor_eye_catcher);
-+ return -1;
-+ }
-+
-+ if (o->data.num_of_sensor_blocks == 0) {
-+ printk("ERROR: SENSOR block num is 0\n");
-+ return -1;
-+ }
-+
-+ o->data.blocks = kzalloc(sizeof(sensor_data_block) * o->data.num_of_sensor_blocks, GFP_KERNEL);
-+ if (o->data.blocks == NULL)
-+ return -ENOMEM;
-+
-+ //printk("Reading %d sensor blocks\n", o->data.num_of_sensor_blocks);
-+ o->temp_block_id = -1;
-+ o->freq_block_id = -1;
-+ o->power_block_id = -1;
-+ o->caps_block_id = -1;
-+ for(b = 0; b < o->data.num_of_sensor_blocks; b++) {
-+ /* 8-byte sensor block head */
-+ strncpy(&o->data.blocks[b].sensor_type[0], (const char*)&d[dnum], 4);
-+ o->data.blocks[b].reserved0 = d[dnum+4];
-+ o->data.blocks[b].sensor_format = d[dnum+5];
-+ o->data.blocks[b].sensor_length = d[dnum+6];
-+ o->data.blocks[b].num_of_sensors = d[dnum+7];
-+ dnum = dnum + 8;
-+
-+ //printk("sensor block[%d]: type: %s, num_of_sensors: %d, sensor_length: %u\n",
-+ //b, o->data.blocks[b].sensor_type, o->data.blocks[b].num_of_sensors,
-+ //o->data.blocks[b].sensor_length);
-+
-+ /* empty sensor block */
-+ if (o->data.blocks[b].num_of_sensors <= 0)
-+ continue;
-+ if (o->data.blocks[b].sensor_length == 0)
-+ continue;
-+
-+ if (strcmp(o->data.blocks[b].sensor_type, "FREQ") == 0) {
-+ o->data.blocks[b].sensor =
-+ kzalloc(sizeof(occ_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
-+
-+ if (o->data.blocks[b].sensor == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
-+ o->freq_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].sensor[s].sensor_id = d[dnum] << 8;
-+ o->data.blocks[b].sensor[s].sensor_id =
-+ o->data.blocks[b].sensor[s].sensor_id | d[dnum+1];
-+ o->data.blocks[b].sensor[s].value = d[dnum+2] << 8;
-+ o->data.blocks[b].sensor[s].value = o->data.blocks[b].sensor[s].value | d[dnum+3];
-+ //printk("sensor[%d]-[%d]: id: %u, value: %u\n",
-+ // b, s, o->data.blocks[b].sensor[s].sensor_id, o->data.blocks[b].sensor[s].value);
-+ dnum = dnum + o->data.blocks[b].sensor_length;
-+ }
-+ }
-+ else if (strcmp(o->data.blocks[b].sensor_type, "TEMP") == 0) {
-+
-+ o->data.blocks[b].sensor =
-+ kzalloc(sizeof(occ_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
-+
-+ if (o->data.blocks[b].sensor == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
-+
-+ o->temp_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].sensor[s].sensor_id = d[dnum] << 8;
-+ o->data.blocks[b].sensor[s].sensor_id =
-+ o->data.blocks[b].sensor[s].sensor_id | d[dnum+1];
-+ o->data.blocks[b].sensor[s].value = d[dnum+2] << 8;
-+ o->data.blocks[b].sensor[s].value = o->data.blocks[b].sensor[s].value | d[dnum+3];
-+ //printk("sensor[%d]-[%d]: id: %u, value: %u\n",
-+ // b, s, o->data.blocks[b].sensor[s].sensor_id, o->data.blocks[b].sensor[s].value);
-+ dnum = dnum + o->data.blocks[b].sensor_length;
-+ }
-+ }
-+ else if (strcmp(o->data.blocks[b].sensor_type, "POWR") == 0) {
-+
-+ o->data.blocks[b].powr =
-+ kzalloc(sizeof(powr_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
-+
-+ if (o->data.blocks[b].powr == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
-+ o->power_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].powr[s].sensor_id = d[dnum] << 8;
-+ o->data.blocks[b].powr[s].sensor_id = o->data.blocks[b].powr[s].sensor_id | d[dnum+1];
-+ o->data.blocks[b].powr[s].update_tag = d[dnum+2] << 24;
-+ o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+3] << 16;
-+ o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+4] << 8;
-+ o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+5];
-+ o->data.blocks[b].powr[s].accumulator = d[dnum+6] << 24;
-+ o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+7] << 16;
-+ o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+8] << 8;
-+ o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+9];
-+ o->data.blocks[b].powr[s].value = d[dnum+10] << 8;
-+ o->data.blocks[b].powr[s].value = o->data.blocks[b].powr[s].value | d[dnum+11];
-+
-+ //printk("sensor[%d]-[%d]: id: %u, value: %u\n",
-+ // b, s, o->data.blocks[b].powr[s].sensor_id, o->data.blocks[b].powr[s].value);
-+
-+ dnum = dnum + o->data.blocks[b].sensor_length;
-+ }
-+ }
-+ else if (strcmp(o->data.blocks[b].sensor_type, "CAPS") == 0) {
-+
-+ o->data.blocks[b].caps =
-+ kzalloc(sizeof(caps_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
-+
-+ if (o->data.blocks[b].caps == NULL) {
-+ ret = -ENOMEM;
-+ goto abort;
-+ }
-+ o->caps_block_id = b;
-+ for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
-+ o->data.blocks[b].caps[s].curr_powercap = d[dnum] << 8;
-+ o->data.blocks[b].caps[s].curr_powercap = o->data.blocks[b].caps[s].curr_powercap | d[dnum+1];
-+ o->data.blocks[b].caps[s].curr_powerreading = d[dnum+2] << 8;
-+ o->data.blocks[b].caps[s].curr_powerreading = o->data.blocks[b].caps[s].curr_powerreading | d[dnum+3];
-+ o->data.blocks[b].caps[s].norm_powercap = d[dnum+4] << 8;
-+ o->data.blocks[b].caps[s].norm_powercap = o->data.blocks[b].caps[s].norm_powercap | d[dnum+5];
-+ o->data.blocks[b].caps[s].max_powercap = d[dnum+6] << 8;
-+ o->data.blocks[b].caps[s].max_powercap = o->data.blocks[b].caps[s].max_powercap| d[dnum+7];
-+ o->data.blocks[b].caps[s].min_powercap = d[dnum+8] << 8;
-+ o->data.blocks[b].caps[s].min_powercap = o->data.blocks[b].caps[s].min_powercap| d[dnum+9];
-+ o->data.blocks[b].caps[s].user_powerlimit = d[dnum+10] << 8;
-+ o->data.blocks[b].caps[s].user_powerlimit = o->data.blocks[b].caps[s].user_powerlimit| d[dnum+11];
-+
-+ dnum = dnum + o->data.blocks[b].sensor_length;
-+ //printk("CAPS sensor #%d:\n", s);
-+ //printk("curr_powercap is %x \n", o->data.blocks[b].caps[s].curr_powercap);
-+ //printk("curr_powerreading is %x \n", o->data.blocks[b].caps[s].curr_powerreading);
-+ //printk("norm_powercap is %x \n", o->data.blocks[b].caps[s].norm_powercap);
-+ //printk("max_powercap is %x \n", o->data.blocks[b].caps[s].max_powercap);
-+ //printk("min_powercap is %x \n", o->data.blocks[b].caps[s].min_powercap);
-+ //printk("user_powerlimit is %x \n", o->data.blocks[b].caps[s].user_powerlimit);
-+ }
-+
-+ }
-+ else {
-+ printk("ERROR: sensor type %s not supported\n", o->data.blocks[b].sensor_type);
-+ ret = -1;
-+ goto abort;
-+ }
-+ }
-+
-+ return 0;
-+abort:
-+ deinit_occ_resp_buf(o);
-+ return ret;
-+}
-+
-+/* used for testing */
-+char fake_occ_rsp[OCC_DATA_MAX] = {
-+0x69, 0x00, 0x00, 0x00, 0xa4, 0xc3, 0x00, 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+0x00, 0x00, 0x00, 0x00, 0x00, 0x6f, 0x70, 0x5f, 0x6f, 0x63, 0x63, 0x5f, 0x31, 0x35, 0x30, 0x37,
-+0x31, 0x36, 0x61, 0x00, 0x00, 0x53, 0x45, 0x4e, 0x53, 0x4f, 0x52, 0x04, 0x01, 0x54, 0x45, 0x4d,
-+0x50, 0x00, 0x01, 0x04, 0x0a, 0x00 ,0x6a, 0x00, 0x00, 0x00, 0x6c, 0x00, 0x00, 0x00, 0x6d, 0x00,
-+0x00,0x00,0x6e,0x00, 0x00,0x00,0x6f,0x00, 0x00,0x00,0x70,0x00, 0x00,0x00,0x71,0x00,
-+0x00,0x00,0x73,0x00, 0x00,0x00,0x74,0x00, 0x00,0x00,0x75,0x00, 0x00,0x46,0x52,0x45,
-+0x51,0x00,0x01,0x04, 0x0a,0x00,0x76,0x00, 0x00,0x00,0x78,0x00, 0x00,0x00,0x79,0x00,
-+0x00,0x00,0x7a,0x00, 0x00,0x00,0x7b,0x00, 0x00,0x00,0x7c,0x00, 0x00,0x00,0x7d,0x00,
-+0x00,0x00,0x7f,0x00, 0x00,0x00,0x80,0x00, 0x00,0x00,0x81,0x00, 0x00,0x50,0x4f,0x57,
-+0x52,0x00,0x01,0x0c, 0x00,0x43,0x41,0x50, 0x53,0x00,0x01,0x0c, 0x01,0x00,0x00,0x00,
-+0x00,0x04,0xb0,0x09, 0x60,0x04,0x4c,0x00, 0x00,0x17,0xc5,};
-+
-+//#define DUMP_RAW 1
-+
-+static int occ_get_all(struct i2c_client *client, occ_response_t *occ_resp)
-+{
-+ char occ_data[OCC_DATA_MAX];
-+ uint16_t num_bytes = 0;
-+ int b = 0;
-+ int ret = 0;
-+/*
-+ //Procedure to access SRAM where OCC data is located
-+ occ_putscom(client, SCOM_OCC_SRAM_WOX, 0x08000000, 0x00000000);
-+ occ_putscom(client, SCOM_OCC_SRAM_WAND, 0xFBFFFFFF, 0xFFFFFFFF);
-+ occ_putscom(client, SCOM_OCC_SRAM_ADDR, OCC_RESPONSE_ADDR, 0x00000000);
-+ occ_putscom(client, SCOM_OCC_SRAM_ADDR, OCC_RESPONSE_ADDR, 0x00000000);
-+
-+ occ_getscomb(client, SCOM_OCC_SRAM_DATA, occ_data, 0);
-+
-+*/
-+
-+ // Init OCB
-+ occ_putscom(client, OCB_STATUS_CONTROL_OR, 0x08000000, 0x00000000);
-+ occ_putscom(client, OCB_STATUS_CONTROL_AND, 0xFBFFFFFF, 0xFFFFFFFF);
-+
-+ // Send poll command to OCC
-+ occ_putscom(client, OCB_ADDRESS, OCC_COMMAND_ADDR, 0x00000000);
-+ occ_putscom(client, OCB_ADDRESS, OCC_COMMAND_ADDR, 0x00000000);
-+ occ_putscom(client, OCB_DATA, 0x00000001, 0x10001100);
-+
-+ // Trigger ATTN
-+ occ_putscom(client, ATTN_DATA, 0x01010000, 0x00000000);
-+
-+ // TODO: check command status Refere to
-+ // "1.6.2 OCC Command/Response Sequence" in OCC_OpenPwr_FW_Interfaces1.2.pdf
-+ // Use sleep as workaround
-+ //msleep(2000);
-+
-+ // Get response data
-+ occ_putscom(client, OCB_ADDRESS, OCC_RESPONSE_ADDR, 0x00000000);
-+ occ_getscomb(client, OCB_DATA, occ_data, 0);
-+
-+ /* FIXME: use fake data to test driver without hw */
-+ //printk("i2c-occ: using FAKE occ data\n");
-+ //memcpy(&occ_data[0], &fake_occ_rsp[0], sizeof(occ_data));
-+
-+ num_bytes = get_occdata_length(occ_data);
-+
-+ //printk("OCC data length: %d\n", num_bytes);
-+
-+#ifdef DUMP_RAW
-+ int i = 0;
-+ printk("\nRAW data\n==================\n");
-+ for (i = 0; i < 8; i++) {
-+ if(i == 4) printk(" ");
-+ printk("%02x", occ_data[i]);
-+ }
-+ printk("\n");
-+#endif
-+
-+ if (num_bytes > OCC_DATA_MAX) {
-+ printk("ERROR: OCC data length must be < 4KB\n");
-+ return -1;
-+ }
-+
-+ if (num_bytes <= 0) {
-+ printk("ERROR: OCC data length is zero\n");
-+ return -1;
-+ }
-+
-+ for (b = 8; b < num_bytes + 8; b = b + 8) {
-+ //occ_getscomb(client, SCOM_OCC_SRAM_DATA, occ_data, b);
-+ occ_getscomb(client, OCB_DATA, occ_data, b);
-+#ifdef DUMP_RAW
-+ for (i = 0; i < 8; i++) {
-+ if(i == 4) printk(" ");
-+ printk("%02x", occ_data[b+i]);
-+ }
-+ printk("\n");
-+#endif
-+
-+ }
-+
-+ /* FIXME: use fake data to test driver without hw */
-+ //memcpy(&occ_data[0], &fake_occ_rsp[0], sizeof(occ_data));
-+
-+ ret = parse_occ_response(occ_data, occ_resp);
-+
-+ return ret;
-+}
-+
-+
-+static int occ_update_device(struct device *dev)
-+{
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ struct i2c_client *client = data->client;
-+ int ret = 0;
-+
-+ mutex_lock(&data->update_lock);
-+
-+ if (time_after(jiffies, data->last_updated + data->sample_time)
-+ || !data->valid) {
-+ deinit_occ_resp_buf(&data->occ_resp);
-+
-+ ret = occ_get_all(client, &data->occ_resp);
-+
-+ data->last_updated = jiffies;
-+ data->valid = 1;
-+ }
-+ mutex_unlock(&data->update_lock);
-+
-+ return ret;
-+}
-+
-+/* ----------------------------------------------------------------------*/
-+/* sysfs attributes for hwmon */
-+
-+static ssize_t show_occ_temp_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device * dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("block_id: %d, sensor: %d\n", data->occ_resp.temp_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor[n - 1];
-+ /* in millidegree Celsius */
-+ val = sensor->value * 1000;
-+ //printk("temp%d sensor value: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+static ssize_t show_occ_temp_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("temp_block_id: %d, sensor: %d\n", data->occ_resp.temp_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor[n - 1];
-+ val = sensor->sensor_id;
-+ //printk("temp%d sensor id: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+static ssize_t show_occ_power_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ powr_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ //printk("power_block_id: %d, sensor: %d\n", data->occ_resp.power_block_id, n -1);
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr == NULL)
-+ return -1;
-+
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr[n - 1];
-+ val = sensor->sensor_id;
-+ //printk("power%d sensor id: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+
-+static ssize_t show_occ_power_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ powr_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ //printk("power block_id: %d, sensor: %d\n", data->occ_resp.power_block_id, n -1);
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr == NULL)
-+ return -1;
-+
-+
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr[n - 1];
-+ val = sensor->value;
-+ //printk("power%d sensor value: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+
-+static ssize_t show_occ_freq_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("freq_block_id: %d, sensor: %d\n", data->occ_resp.freq_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor[n - 1];
-+ val = sensor->sensor_id;
-+ //printk("freq%d sensor id: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+
-+static ssize_t show_occ_freq_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ occ_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor == NULL)
-+ return -1;
-+
-+ //printk("block_id: %d, sensor: %d\n", data->occ_resp.freq_block_id, n -1);
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor[n - 1];
-+ val = sensor->value;
-+ //printk("freq%d sensor value: %d\n", n, val);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+static ssize_t show_occ_caps(struct device *hwmon_dev, struct device_attribute *da, char *buf)
-+{
-+ struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
-+ int nr = attr->nr;
-+ int n = attr->index;
-+ struct device *dev = hwmon_dev->parent;
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int ret = 0;
-+ caps_sensor *sensor;
-+ int val = 0;
-+
-+ ret = occ_update_device(dev);
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ //printk("block_id: %d, sensor: %d, nr: %d\n", data->occ_resp.caps_block_id, n - 1, nr);
-+ if (data->occ_resp.data.blocks == NULL ||
-+ data->occ_resp.data.blocks[data->occ_resp.caps_block_id].caps == NULL)
-+ return -1;
-+
-+ sensor = &data->occ_resp.data.blocks[data->occ_resp.caps_block_id].caps[n - 1];
-+
-+ switch (nr) {
-+ case 0:
-+ val = sensor->curr_powercap;
-+ break;
-+ case 1:
-+ val = sensor->curr_powerreading;
-+ break;
-+ case 2:
-+ val = sensor->norm_powercap;
-+ break;
-+ case 3:
-+ val = sensor->max_powercap;
-+ break;
-+ case 4:
-+ val = sensor->min_powercap;
-+ break;
-+ case 5:
-+ val = sensor->user_powerlimit;
-+ break;
-+ default:
-+ val = 0;
-+ }
-+
-+ //printk("caps%d sensor value: %d, nr: %d\n", n, val, nr);
-+
-+ //printk("------------- above are debug message, bellow is real output------------\n");
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+#if 0
-+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 1);
-+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 2);
-+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 3);
-+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 4);
-+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 5);
-+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 6);
-+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 7);
-+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 8);
-+static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 9);
-+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 4);
-+static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 5);
-+static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 6);
-+static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 7);
-+static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 8);
-+static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 9);
-+
-+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 1);
-+static SENSOR_DEVICE_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 2);
-+static SENSOR_DEVICE_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 3);
-+static SENSOR_DEVICE_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 4);
-+static SENSOR_DEVICE_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 4);
-+
-+static SENSOR_DEVICE_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 1);
-+static SENSOR_DEVICE_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 2);
-+static SENSOR_DEVICE_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 3);
-+static SENSOR_DEVICE_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 4);
-+static SENSOR_DEVICE_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 4);
-+
-+static struct attribute *occ_attrs[] = {
-+ &sensor_dev_attr_temp1_input.dev_attr.attr,
-+ &sensor_dev_attr_temp2_input.dev_attr.attr,
-+ &sensor_dev_attr_temp3_input.dev_attr.attr,
-+ &sensor_dev_attr_temp4_input.dev_attr.attr,
-+ &sensor_dev_attr_temp5_input.dev_attr.attr,
-+ &sensor_dev_attr_temp6_input.dev_attr.attr,
-+ &sensor_dev_attr_temp7_input.dev_attr.attr,
-+ &sensor_dev_attr_temp8_input.dev_attr.attr,
-+ &sensor_dev_attr_temp9_input.dev_attr.attr,
-+ &sensor_dev_attr_temp1_label.dev_attr.attr,
-+ &sensor_dev_attr_temp2_label.dev_attr.attr,
-+ &sensor_dev_attr_temp3_label.dev_attr.attr,
-+ &sensor_dev_attr_temp4_label.dev_attr.attr,
-+ &sensor_dev_attr_temp5_label.dev_attr.attr,
-+ &sensor_dev_attr_temp6_label.dev_attr.attr,
-+ &sensor_dev_attr_temp7_label.dev_attr.attr,
-+ &sensor_dev_attr_temp8_label.dev_attr.attr,
-+ &sensor_dev_attr_temp9_label.dev_attr.attr,
-+ &sensor_dev_attr_power1_input.dev_attr.attr,
-+ &sensor_dev_attr_power2_input.dev_attr.attr,
-+ &sensor_dev_attr_power3_input.dev_attr.attr,
-+ &sensor_dev_attr_power4_input.dev_attr.attr,
-+ &sensor_dev_attr_power1_label.dev_attr.attr,
-+ &sensor_dev_attr_power2_label.dev_attr.attr,
-+ &sensor_dev_attr_power3_label.dev_attr.attr,
-+ &sensor_dev_attr_power4_label.dev_attr.attr,
-+ &sensor_dev_attr_freq1_input.dev_attr.attr,
-+ &sensor_dev_attr_freq2_input.dev_attr.attr,
-+ &sensor_dev_attr_freq3_input.dev_attr.attr,
-+ &sensor_dev_attr_freq4_input.dev_attr.attr,
-+ &sensor_dev_attr_freq1_label.dev_attr.attr,
-+ &sensor_dev_attr_freq2_label.dev_attr.attr,
-+ &sensor_dev_attr_freq3_label.dev_attr.attr,
-+ &sensor_dev_attr_freq4_label.dev_attr.attr,
-+
-+ NULL
-+};
-+ATTRIBUTE_GROUPS(occ);
-+
-+#endif
-+
-+static struct sensor_device_attribute temp_input[] = {
-+ SENSOR_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 1),
-+ SENSOR_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 2),
-+ SENSOR_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 3),
-+ SENSOR_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 4),
-+ SENSOR_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 5),
-+ SENSOR_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 6),
-+ SENSOR_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 7),
-+ SENSOR_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 8),
-+ SENSOR_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 9),
-+ SENSOR_ATTR(temp10_input, S_IRUGO, show_occ_temp_input, NULL, 10),
-+ SENSOR_ATTR(temp11_input, S_IRUGO, show_occ_temp_input, NULL, 11),
-+ SENSOR_ATTR(temp12_input, S_IRUGO, show_occ_temp_input, NULL, 12),
-+ SENSOR_ATTR(temp13_input, S_IRUGO, show_occ_temp_input, NULL, 13),
-+ SENSOR_ATTR(temp14_input, S_IRUGO, show_occ_temp_input, NULL, 14),
-+ SENSOR_ATTR(temp15_input, S_IRUGO, show_occ_temp_input, NULL, 15),
-+ SENSOR_ATTR(temp16_input, S_IRUGO, show_occ_temp_input, NULL, 16),
-+ SENSOR_ATTR(temp17_input, S_IRUGO, show_occ_temp_input, NULL, 17),
-+ SENSOR_ATTR(temp18_input, S_IRUGO, show_occ_temp_input, NULL, 18),
-+ SENSOR_ATTR(temp19_input, S_IRUGO, show_occ_temp_input, NULL, 19),
-+ SENSOR_ATTR(temp20_input, S_IRUGO, show_occ_temp_input, NULL, 20),
-+ SENSOR_ATTR(temp21_input, S_IRUGO, show_occ_temp_input, NULL, 21),
-+ SENSOR_ATTR(temp22_input, S_IRUGO, show_occ_temp_input, NULL, 22),
-+};
-+
-+static struct sensor_device_attribute temp_label[] = {
-+ SENSOR_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 1),
-+ SENSOR_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 2),
-+ SENSOR_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 3),
-+ SENSOR_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 4),
-+ SENSOR_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 5),
-+ SENSOR_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 6),
-+ SENSOR_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 7),
-+ SENSOR_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 8),
-+ SENSOR_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 9),
-+ SENSOR_ATTR(temp10_label, S_IRUGO, show_occ_temp_label, NULL, 10),
-+ SENSOR_ATTR(temp11_label, S_IRUGO, show_occ_temp_label, NULL, 11),
-+ SENSOR_ATTR(temp12_label, S_IRUGO, show_occ_temp_label, NULL, 12),
-+ SENSOR_ATTR(temp13_label, S_IRUGO, show_occ_temp_label, NULL, 13),
-+ SENSOR_ATTR(temp14_label, S_IRUGO, show_occ_temp_label, NULL, 14),
-+ SENSOR_ATTR(temp15_label, S_IRUGO, show_occ_temp_label, NULL, 15),
-+ SENSOR_ATTR(temp16_label, S_IRUGO, show_occ_temp_label, NULL, 16),
-+ SENSOR_ATTR(temp17_label, S_IRUGO, show_occ_temp_label, NULL, 17),
-+ SENSOR_ATTR(temp18_label, S_IRUGO, show_occ_temp_label, NULL, 18),
-+ SENSOR_ATTR(temp19_label, S_IRUGO, show_occ_temp_label, NULL, 19),
-+ SENSOR_ATTR(temp20_label, S_IRUGO, show_occ_temp_label, NULL, 20),
-+ SENSOR_ATTR(temp21_label, S_IRUGO, show_occ_temp_label, NULL, 21),
-+ SENSOR_ATTR(temp22_label, S_IRUGO, show_occ_temp_label, NULL, 22),
-+
-+};
-+
-+#define TEMP_UNIT_ATTRS(X) \
-+{ &temp_input[X].dev_attr.attr, \
-+ &temp_label[X].dev_attr.attr, \
-+ NULL \
-+}
-+
-+/* 10-core CPU, occ has 22 temp sensors, more socket, more sensors */
-+static struct attribute *occ_temp_attr[][3] = {
-+ TEMP_UNIT_ATTRS(0),
-+ TEMP_UNIT_ATTRS(1),
-+ TEMP_UNIT_ATTRS(2),
-+ TEMP_UNIT_ATTRS(3),
-+ TEMP_UNIT_ATTRS(4),
-+ TEMP_UNIT_ATTRS(5),
-+ TEMP_UNIT_ATTRS(6),
-+ TEMP_UNIT_ATTRS(7),
-+ TEMP_UNIT_ATTRS(8),
-+ TEMP_UNIT_ATTRS(9),
-+ TEMP_UNIT_ATTRS(10),
-+ TEMP_UNIT_ATTRS(11),
-+ TEMP_UNIT_ATTRS(12),
-+ TEMP_UNIT_ATTRS(13),
-+ TEMP_UNIT_ATTRS(14),
-+ TEMP_UNIT_ATTRS(15),
-+ TEMP_UNIT_ATTRS(16),
-+ TEMP_UNIT_ATTRS(17),
-+ TEMP_UNIT_ATTRS(18),
-+ TEMP_UNIT_ATTRS(19),
-+ TEMP_UNIT_ATTRS(20),
-+ TEMP_UNIT_ATTRS(21),
-+};
-+
-+static const struct attribute_group occ_temp_attr_group[] = {
-+ { .attrs = occ_temp_attr[0] },
-+ { .attrs = occ_temp_attr[1] },
-+ { .attrs = occ_temp_attr[2] },
-+ { .attrs = occ_temp_attr[3] },
-+ { .attrs = occ_temp_attr[4] },
-+ { .attrs = occ_temp_attr[5] },
-+ { .attrs = occ_temp_attr[6] },
-+ { .attrs = occ_temp_attr[7] },
-+ { .attrs = occ_temp_attr[8] },
-+ { .attrs = occ_temp_attr[9] },
-+ { .attrs = occ_temp_attr[10] },
-+ { .attrs = occ_temp_attr[11] },
-+ { .attrs = occ_temp_attr[12] },
-+ { .attrs = occ_temp_attr[13] },
-+ { .attrs = occ_temp_attr[14] },
-+ { .attrs = occ_temp_attr[15] },
-+ { .attrs = occ_temp_attr[16] },
-+ { .attrs = occ_temp_attr[17] },
-+ { .attrs = occ_temp_attr[18] },
-+ { .attrs = occ_temp_attr[19] },
-+ { .attrs = occ_temp_attr[20] },
-+ { .attrs = occ_temp_attr[21] },
-+};
-+
-+
-+static struct sensor_device_attribute freq_input[] = {
-+ SENSOR_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 1),
-+ SENSOR_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 2),
-+ SENSOR_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 3),
-+ SENSOR_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 4),
-+ SENSOR_ATTR(freq5_input, S_IRUGO, show_occ_freq_input, NULL, 5),
-+ SENSOR_ATTR(freq6_input, S_IRUGO, show_occ_freq_input, NULL, 6),
-+ SENSOR_ATTR(freq7_input, S_IRUGO, show_occ_freq_input, NULL, 7),
-+ SENSOR_ATTR(freq8_input, S_IRUGO, show_occ_freq_input, NULL, 8),
-+ SENSOR_ATTR(freq9_input, S_IRUGO, show_occ_freq_input, NULL, 9),
-+ SENSOR_ATTR(freq10_input, S_IRUGO, show_occ_freq_input, NULL, 10),
-+};
-+
-+static struct sensor_device_attribute freq_label[] = {
-+ SENSOR_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 1),
-+ SENSOR_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 2),
-+ SENSOR_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 3),
-+ SENSOR_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 4),
-+ SENSOR_ATTR(freq5_label, S_IRUGO, show_occ_freq_label, NULL, 5),
-+ SENSOR_ATTR(freq6_label, S_IRUGO, show_occ_freq_label, NULL, 6),
-+ SENSOR_ATTR(freq7_label, S_IRUGO, show_occ_freq_label, NULL, 7),
-+ SENSOR_ATTR(freq8_label, S_IRUGO, show_occ_freq_label, NULL, 8),
-+ SENSOR_ATTR(freq9_label, S_IRUGO, show_occ_freq_label, NULL, 9),
-+ SENSOR_ATTR(freq10_label, S_IRUGO, show_occ_freq_label, NULL, 10),
-+
-+};
-+
-+#define FREQ_UNIT_ATTRS(X) \
-+{ &freq_input[X].dev_attr.attr, \
-+ &freq_label[X].dev_attr.attr, \
-+ NULL \
-+}
-+
-+/* 10-core CPU, occ has 22 freq sensors, more socket, more sensors */
-+static struct attribute *occ_freq_attr[][3] = {
-+ FREQ_UNIT_ATTRS(0),
-+ FREQ_UNIT_ATTRS(1),
-+ FREQ_UNIT_ATTRS(2),
-+ FREQ_UNIT_ATTRS(3),
-+ FREQ_UNIT_ATTRS(4),
-+ FREQ_UNIT_ATTRS(5),
-+ FREQ_UNIT_ATTRS(6),
-+ FREQ_UNIT_ATTRS(7),
-+ FREQ_UNIT_ATTRS(8),
-+ FREQ_UNIT_ATTRS(9),
-+};
-+
-+static const struct attribute_group occ_freq_attr_group[] = {
-+ { .attrs = occ_freq_attr[0] },
-+ { .attrs = occ_freq_attr[1] },
-+ { .attrs = occ_freq_attr[2] },
-+ { .attrs = occ_freq_attr[3] },
-+ { .attrs = occ_freq_attr[4] },
-+ { .attrs = occ_freq_attr[5] },
-+ { .attrs = occ_freq_attr[6] },
-+ { .attrs = occ_freq_attr[7] },
-+ { .attrs = occ_freq_attr[8] },
-+ { .attrs = occ_freq_attr[9] },
-+};
-+
-+static struct sensor_device_attribute_2 caps_curr_powercap[] = {
-+ SENSOR_ATTR_2(caps_curr_powercap, S_IRUGO, show_occ_caps, NULL, 0, 1),
-+};
-+static struct sensor_device_attribute_2 caps_curr_powerreading[] = {
-+ SENSOR_ATTR_2(caps_curr_powerreading, S_IRUGO, show_occ_caps, NULL, 1, 1),
-+};
-+static struct sensor_device_attribute_2 caps_norm_powercap[] = {
-+ SENSOR_ATTR_2(caps_norm_powercap, S_IRUGO, show_occ_caps, NULL, 2, 1),
-+};
-+static struct sensor_device_attribute_2 caps_max_powercap[] = {
-+ SENSOR_ATTR_2(caps_max_powercap, S_IRUGO, show_occ_caps, NULL, 3, 1),
-+};
-+static struct sensor_device_attribute_2 caps_min_powercap[] = {
-+ SENSOR_ATTR_2(caps_min_powercap, S_IRUGO, show_occ_caps, NULL, 4, 1),
-+};
-+static struct sensor_device_attribute_2 caps_user_powerlimit[] = {
-+ SENSOR_ATTR_2(caps_user_powerlimit, S_IRUGO, show_occ_caps, NULL, 5, 1),
-+};
-+#define CAPS_UNIT_ATTRS(X) \
-+{ &caps_curr_powercap[X].dev_attr.attr, \
-+ &caps_curr_powerreading[X].dev_attr.attr, \
-+ &caps_norm_powercap[X].dev_attr.attr, \
-+ &caps_max_powercap[X].dev_attr.attr, \
-+ &caps_min_powercap[X].dev_attr.attr, \
-+ &caps_user_powerlimit[X].dev_attr.attr, \
-+ NULL \
-+}
-+
-+/* 10-core CPU, occ has 1 caps sensors */
-+static struct attribute *occ_caps_attr[][7] = {
-+ CAPS_UNIT_ATTRS(0),
-+};
-+static const struct attribute_group occ_caps_attr_group[] = {
-+ { .attrs = occ_caps_attr[0] },
-+};
-+
-+static struct sensor_device_attribute power_input[] = {
-+ SENSOR_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 1),
-+ SENSOR_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 2),
-+ SENSOR_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 3),
-+ SENSOR_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 4),
-+ SENSOR_ATTR(power5_input, S_IRUGO, show_occ_power_input, NULL, 5),
-+ SENSOR_ATTR(power6_input, S_IRUGO, show_occ_power_input, NULL, 6),
-+ SENSOR_ATTR(power7_input, S_IRUGO, show_occ_power_input, NULL, 7),
-+ SENSOR_ATTR(power8_input, S_IRUGO, show_occ_power_input, NULL, 8),
-+ SENSOR_ATTR(power9_input, S_IRUGO, show_occ_power_input, NULL, 9),
-+ SENSOR_ATTR(power10_input, S_IRUGO, show_occ_power_input, NULL, 10),
-+ SENSOR_ATTR(power11_input, S_IRUGO, show_occ_power_input, NULL, 11),
-+};
-+
-+static struct sensor_device_attribute power_label[] = {
-+ SENSOR_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 1),
-+ SENSOR_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 2),
-+ SENSOR_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 3),
-+ SENSOR_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 4),
-+ SENSOR_ATTR(power5_label, S_IRUGO, show_occ_power_label, NULL, 5),
-+ SENSOR_ATTR(power6_label, S_IRUGO, show_occ_power_label, NULL, 6),
-+ SENSOR_ATTR(power7_label, S_IRUGO, show_occ_power_label, NULL, 7),
-+ SENSOR_ATTR(power8_label, S_IRUGO, show_occ_power_label, NULL, 8),
-+ SENSOR_ATTR(power9_label, S_IRUGO, show_occ_power_label, NULL, 9),
-+ SENSOR_ATTR(power10_label, S_IRUGO, show_occ_power_label, NULL, 10),
-+ SENSOR_ATTR(power11_label, S_IRUGO, show_occ_power_label, NULL, 11),
-+};
-+
-+#define POWER_UNIT_ATTRS(X) \
-+{ &power_input[X].dev_attr.attr, \
-+ &power_label[X].dev_attr.attr, \
-+ NULL \
-+}
-+
-+/* 10-core CPU, occ has 11 power sensors, more socket, more sensors */
-+static struct attribute *occ_power_attr[][3] = {
-+ POWER_UNIT_ATTRS(0),
-+ POWER_UNIT_ATTRS(1),
-+ POWER_UNIT_ATTRS(2),
-+ POWER_UNIT_ATTRS(3),
-+ POWER_UNIT_ATTRS(4),
-+ POWER_UNIT_ATTRS(5),
-+ POWER_UNIT_ATTRS(6),
-+ POWER_UNIT_ATTRS(7),
-+ POWER_UNIT_ATTRS(8),
-+ POWER_UNIT_ATTRS(9),
-+ POWER_UNIT_ATTRS(10),
-+};
-+
-+static const struct attribute_group occ_power_attr_group[] = {
-+ { .attrs = occ_power_attr[0] },
-+ { .attrs = occ_power_attr[1] },
-+ { .attrs = occ_power_attr[2] },
-+ { .attrs = occ_power_attr[3] },
-+ { .attrs = occ_power_attr[4] },
-+ { .attrs = occ_power_attr[5] },
-+ { .attrs = occ_power_attr[6] },
-+ { .attrs = occ_power_attr[7] },
-+ { .attrs = occ_power_attr[8] },
-+ { .attrs = occ_power_attr[9] },
-+ { .attrs = occ_power_attr[10] },
-+};
-+
-+static void occ_remove_sysfs_files(struct device *dev)
-+{
-+ int i = 0;
-+
-+ for (i = 0; i < ARRAY_SIZE(occ_temp_attr_group); i++)
-+ sysfs_remove_group(&dev->kobj, &occ_temp_attr_group[i]);
-+
-+ for (i = 0; i < ARRAY_SIZE(occ_freq_attr_group); i++)
-+ sysfs_remove_group(&dev->kobj, &occ_freq_attr_group[i]);
-+
-+ for (i = 0; i < ARRAY_SIZE(occ_power_attr_group); i++)
-+ sysfs_remove_group(&dev->kobj, &occ_power_attr_group[i]);
-+
-+ for (i = 0; i < ARRAY_SIZE(occ_caps_attr_group); i++)
-+ sysfs_remove_group(&dev->kobj, &occ_caps_attr_group[i]);
-+}
-+
-+
-+static int occ_create_sysfs_attribute(struct device *dev)
-+{
-+ /* The sensor number varies for different
-+ * platform depending on core number. We'd better
-+ * create them dynamically */
-+ struct occ_drv_data *data = dev_get_drvdata(dev);
-+ int i = 0;
-+ int num_of_sensors = 0;
-+ int ret = 0;
-+
-+ /* get sensor number from occ. */
-+ ret = occ_update_device(dev);
-+ if (ret != 0)
-+ {
-+ /* FIXME: to test fake data */
-+ printk("ERROR: cannot get occ sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (data->occ_resp.data.blocks == NULL)
-+ return -1;
-+
-+ /* temp sensors */
-+ if (data->occ_resp.temp_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.temp_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create temp group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_temp_attr_group[i]);
-+ if (ret)
-+ {
-+ dev_err(dev, "error create temp sysfs entry\n");
-+ goto error;
-+ }
-+ }
-+ }
-+
-+ /* freq sensors */
-+ if (data->occ_resp.freq_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.freq_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create freq group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_freq_attr_group[i]);
-+ if (ret)
-+ {
-+ dev_err(dev, "error create freq sysfs entry\n");
-+ goto error;
-+ }
-+ }
-+ }
-+
-+ /* power sensors */
-+ //printk("power_block_id: %d\n", data->occ_resp.power_block_id);
-+ if (data->occ_resp.power_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.power_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create power group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_power_attr_group[i]);
-+ if (ret)
-+ {
-+ dev_err(dev, "error create power sysfs entry\n");
-+ goto error;
-+ }
-+ }
-+ }
-+
-+ /* caps sensors */
-+ //printk("caps_block_id: %d\n", data->occ_resp.caps_block_id);
-+ if (data->occ_resp.caps_block_id >= 0)
-+ {
-+ num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.caps_block_id].num_of_sensors;
-+ for (i = 0; i < num_of_sensors; i++)
-+ {
-+ //printk("create caps group: %d\n", i);
-+ //ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
-+ ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_caps_attr_group[i]);
-+ if (ret)
-+ {
-+ dev_err(dev, "error create caps sysfs entry\n");
-+ goto error;
-+ }
-+ }
-+ }
-+
-+ return 0;
-+error:
-+ occ_remove_sysfs_files(data->hwmon_dev);
-+ return ret;
-+}
-+
-+/*-----------------------------------------------------------------------*/
-+/* device probe and removal */
-+
-+#define OCC_I2C_ADDR 0x50
-+#define OCC_I2C_NAME "occ-i2c"
-+
-+enum occ_type {
-+ occ_id,
-+};
-+
-+static int occ_probe(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+ struct device *dev = &client->dev;
-+ struct occ_drv_data *data;
-+ unsigned long funcs;
-+ struct device_node *np = dev->of_node;
-+ //u32 pval = 0;
-+ int ret = 0;
-+
-+ data = devm_kzalloc(dev, sizeof(struct occ_drv_data), GFP_KERNEL);
-+ if (!data)
-+ return -ENOMEM;
-+
-+ data->client = client;
-+ i2c_set_clientdata(client, data);
-+ mutex_init(&data->update_lock);
-+ data->sample_time = HZ;
-+
-+ /* Yi: i2c-core should assign address to
-+ * client when detection - but it does not work FIXME */
-+ //client->addr = OCC_I2C_ADDR;
-+
-+ /* Yi: read address from device table */
-+ //if (of_property_read_u32(np, "reg", &pval)) {
-+ // dev_err(&client->dev, "invalid reg\n");
-+ //}
-+ //client->addr = pval;
-+
-+ /* configure the driver */
-+ //dev_dbg(dev, "occ register hwmon @0x%x\n", client->addr);
-+ //data->hwmon_dev = hwmon_device_register_with_groups(dev, "occ",
-+ // data, occ_groups);
-+
-+ /* Yi: try to create sysfs attributes dynamically */
-+ data->hwmon_dev = hwmon_device_register(dev);
-+ if (IS_ERR(data->hwmon_dev))
-+ return PTR_ERR(data->hwmon_dev);
-+
-+ ret = occ_create_sysfs_attribute(dev);
-+ if (ret)
-+ {
-+ hwmon_device_unregister(data->hwmon_dev);
-+ return ret;
-+ }
-+
-+ data->hwmon_dev->parent = dev;
-+
-+ //dev_dbg(dev, "%s: sensor '%s'\n",
-+ // dev_name(data->hwmon_dev), client->name);
-+
-+ funcs = i2c_get_functionality(client->adapter);
-+ //dev_info(dev, "i2c adaptor supports function: 0x%lx\n", funcs);
-+
-+ /* Yi: seems always error? disable for now */
-+ //occ_check_i2c_errors(client);
-+
-+ //dev_info(dev, "occ i2c driver ready: i2c addr@0x%x\n", client->addr);
-+ printk("occ i2c driver ready: i2c addr@0x%x\n", client->addr);
-+
-+ return 0;
-+}
-+
-+static int occ_remove(struct i2c_client *client)
-+{
-+ struct occ_drv_data *data = i2c_get_clientdata(client);
-+
-+ /* free allocated sensor memory */
-+ deinit_occ_resp_buf(&data->occ_resp);
-+
-+ //occ_remove_sysfs_files(&client->dev);
-+ occ_remove_sysfs_files(data->hwmon_dev);
-+ hwmon_device_unregister(data->hwmon_dev);
-+ return 0;
-+}
-+
-+/* used for old-style board info */
-+static const struct i2c_device_id occ_ids[] = {
-+ { OCC_I2C_NAME, occ_id, },
-+ { /* LIST END */ }
-+};
-+MODULE_DEVICE_TABLE(i2c, occ_ids);
-+
-+static const struct of_device_id i2c_occ_of_match[] = {
-+ {.compatible = "ibm,occ-i2c"},
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_occ_of_match);
-+
-+#ifdef CONFIG_PM
-+static int occ_suspend(struct device *dev)
-+{
-+ //struct i2c_client *client = to_i2c_client(dev);
-+ /* TODO */
-+ return 0;
-+}
-+
-+static int occ_resume(struct device *dev)
-+{
-+ //struct i2c_client *client = to_i2c_client(dev);
-+ /* TODO */
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops occ_dev_pm_ops = {
-+ .suspend = occ_suspend,
-+ .resume = occ_resume,
-+};
-+#define OCC_DEV_PM_OPS (&occ_dev_pm_ops)
-+#else
-+#define OCC_DEV_PM_OPS NULL
-+#endif /* CONFIG_PM */
-+
-+/* Yi: i2c-core uses i2c-detect() to detect device in bellow address list.
-+ If exists, address will be assigned to client.
-+ * It is also possible to read address from device table. */
-+static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
-+
-+/* Return 0 if detection is successful, -ENODEV otherwise */
-+static int occ_detect(struct i2c_client *new_client,
-+ struct i2c_board_info *info)
-+{
-+ /* i2c-core need this function to create new device */
-+ strncpy(info->type, OCC_I2C_NAME, sizeof(OCC_I2C_NAME));
-+ return 0;
-+}
-+
-+static struct i2c_driver occ_driver = {
-+ .class = I2C_CLASS_HWMON,
-+ .driver = {
-+ .name = OCC_I2C_NAME,
-+ .pm = OCC_DEV_PM_OPS,
-+ .of_match_table = i2c_occ_of_match,
-+ },
-+ .probe = occ_probe,
-+ .remove = occ_remove,
-+ .id_table = occ_ids,
-+ .address_list = normal_i2c,
-+ .detect = occ_detect,
-+};
-+
-+module_i2c_driver(occ_driver);
-+
-+#if 0
-+/* Create new i2c device */
-+static struct i2c_board_info my_dev_info[] __initdata = {
-+ {
-+ I2C_BOARD_INFO(OCC_I2C_NAME, 0x50),
-+ },
-+};
-+
-+static struct i2c_client *my_client;
-+
-+static int occ_init(void)
-+{
-+ static int sys_adap_bus_num = 3;
-+ struct i2c_adapter* adap = i2c_get_adapter(sys_adap_bus_num);
-+
-+ if(adap==NULL) {
-+ printk("[OCC-DEBUG] i2c_get_adapter fail!\n");
-+ return -1;
-+ }
-+
-+ my_client = i2c_new_device(adap, &my_dev_info[0]);
-+ if( my_client==NULL ){
-+ printk("[OCC-DEBUG] i2c_new_device fail!\n");
-+ return -1;
-+ }
-+ i2c_put_adapter(adap);
-+ return i2c_add_driver(&occ_driver);
-+}
-+
-+static void __exit occ_exit(void)
-+{
-+ i2c_unregister_device(my_client);
-+ i2c_del_driver(&occ_driver);
-+}
-+
-+module_init(occ_init);
-+module_exit(occ_exit);
-+
-+#endif
-+
-+MODULE_AUTHOR("Li Yi <shliyi@cn.ibm.com>");
-+MODULE_DESCRIPTION("BMC OCC monitor driver");
-+MODULE_LICENSE("GPL");
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
deleted file mode 100644
index 1099689..0000000
--- a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
+++ /dev/null
@@ -1,3 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/linux-obmc:"
-SRC_URI += "file://barreleye.cfg"
-SRC_URI += "file://occ_hwmon.patch"
diff --git a/meta-phosphor/common/recipes-kernel/linux/linux-obmc_4.3.bb b/meta-phosphor/common/recipes-kernel/linux/linux-obmc_4.3.bb
index b2acc1c..3b1eec8 100644
--- a/meta-phosphor/common/recipes-kernel/linux/linux-obmc_4.3.bb
+++ b/meta-phosphor/common/recipes-kernel/linux/linux-obmc_4.3.bb
@@ -10,7 +10,7 @@
LINUX_VERSION ?= "4.3"
LINUX_VERSION_EXTENSION ?= "-${SRCREV}"
-SRCREV="openbmc-20160120-1"
+SRCREV="openbmc-20160127-1"
PV = "${LINUX_VERSION}+git${SRCPV}"