subtree updates
meta-raspberrypi: 90b3ac6fb3..836755370f:
Alexandru Costache (3):
conf/machine: Add Pi Zero 2 Wifi 64bit yocto machine
linux-firmware-rpidistro: Package bcm43436 and bcm43436s firmware
linux-raspberrypi: Bump to 5.10.78
Andrei Gherzan (14):
raspberrypi-firmware: Bump to 20211007
linux-raspberrypi: Bump 5.10 to 5.10.76
linux-raspberrypi: Drop 5.4
README.md: Fix docs and minor tweaks
docs: Bump copyright year
README.md: Fix sponsor table
README.md: Fix sponsor table take two
docs: Fix RtD build
docs: Add module dependency/requirement for RtD
docs: Advertise raspberrypi0-2w-64 supported machine
Update references to Yocto mailing list
README.md: Fix the matrix chat link
libwpe: Migrate build workaround from oe-core
rpi-config: Take into consideration ENABLE_UART value of 0
Cameron Kellough (1):
rpi-base.inc: Added gpio-poweroff overlay. Some machines need to have the kernel toggle a gpio when an external power source needs to shut off power to complete a shutdown and de-energize the processor. gpio-poweroff provides this functionality but was omitted from the kernel overlays brought oveer by the rpi-layer from the kernel. Signed-off-by: Cameron Kellough <cameron@telemetrak.com>
Joel Winarske (1):
mesa: Enable building vulkan driver
Khem Raj (4):
linux-firmware-rpidistro: Use bullseye branch
parselogs: Update the error regexps to 5.10 kernel
linux-raspberrypi: Upgrade to 5.10.81
weston-init: Add --continue-without-input option to weston
Marcel Hamer (1):
recipes: Update SRC_URI protocols for github
Martin Jansa (1):
rpi-config: don't trigger bbfatal for empty ENABLE_UART
Peter A. Bigot (1):
conf/machine: add variant Wi-Fi/BT drivers for CM4 and Pi 400
meta-openembedded: 2f6797d8d6..6b63095946:
Alex Kiernan (2):
ntpsec: Add recipe
ntpsec: Add glibc-2.34/kernel-5.14 seccomp fixes
Alexander Kanavin (23):
libstatgrab: update 0.92 -> 0.92.1
open-vpm-tools: update 11.2.5 -> 11.3.5
libid3tag: add from oe-core
libportal: add from oe-core
gtkmm3: add gdk-pixbuf-native to satisfy meson 0.61
gjs: drop patch to satisfy meson 0.61
gnome-terminal: backport a meson 0.61 patch
gnome-bluetooth: backport a meson 0.61 patch
gnome-font-viewer: backport a meson 0.61 patch
gnome-session: update 40.1.1 -> 41.3
gnome-settings-daemon: add a meson 0.61 patch
gnome-shell: backport a meson 0.61 patch
accountsservice: backport a meson 0.61 patch
gnome-screenshot: backport a meson 0.61 patch
evince: fix meson 0.61 builds
gnome-calendar: fix meson 0.61 builds
gthumb: fix meson 0.61 builds
gedit: add a meson 0.61 patch
gnome-disk-utility: add a meson 0.61 patch
gnome-control-center: add a meson 0.61 patch
gnome-photos: add a meson 0.61 patch
dconf-editor: add a meson 0.61 patch
network-manager-applet: add meson 0.61 patch
Andreas Müller (111):
xfce4-sensors-plugin: upgrade 1.3.95 -> 1.4.1
fftw: remove unused patch
mozjs: Move back to recipes-extended - no meta-python specifics required
Rename mozjs -> mozjs-91 to allow multiple versions of mozjs
polkit: Adjust to mozjs-91 in DEPENDS
mozjs-91: remove static library
mozjs-78: Initial add
graphene: enable introspection by default - gtk4 & mutter 41 require it
graphene: extend to native and nativesdk
graphene: Tidy up recipe a bit
gtk4: initial add 4.4.0
gjs: upgrade 1.58.8 -> 1.70.0
mutter: upgrade 3.34.6 -> 41.0
gdm: upgrade 3.36.3 -> 41.0
upower: upgrade 0.99.11 -> 0.99.13
udisks2: upgrade 2.9.3 -> 2.9.4
gnome-settings-daemon: upgrade 3.36.1 -> 41.0
gnome-shell: upgrade 3.34.5 -> 41.0
gnome-shell-extensions: upgrade 3.34.2 -> 40.1
gnome-desktop: upgrade 3.38.8 -> 41.0 and give up '3' receipe name suffix
gnome-session: upgrade 3.36.0 -> 40.1.1
gnome-control-center: upgrade 3.36.4 -> 41.1
gexiv2: upgrade 0.12.2 -> 0.14.0
gparted: upgrade 1.3.0 -> 1.3.1
gnome-backgrounds: upgrade 3.38.0 -> 41.0
gnome-tweaks: upgrade 3.34.0 -> 40.0
gnome-terminal: upgrade 3.40.2 -> 3.42.0 / meson build
gnome-panel: upgrade 3.36.1 -> 3.38.0
grilo: upgrade 0.3.13 -> 0.3.14
grilo-plugins: upgrade 0.3.13 -> 0.3.14
mozjs-91: Fix build on powerpc
gdm: Fix REQUIRED_DISTRO_FEATURES broken by adding introspection
gnome-control-center: Add libhandy to DEPENDS
gnome-backgrounds: Fix licenses
poppler: upgrade 21.10.0 -> 21.11.0
xfce4-whiskermenu-plugin: upgrade 2.5.3 -> 2.6.2
ristretto: upgrade 0.11.0 -> 0.12.0
xfce4-cpugraph-plugin: upgrade 1.2.3 -> 1.2.5
xfce4-sensors-plugin: upgrade 1.4.1 -> 1.4.2
catfish: upgrade 4.16.0 -> 4.16.3
mousepad: upgrade 0.5.5 -> 0.5.7
libxfce4ui: upgrade 4.16.0 -> 4.16.1
fluidsynth: upgrade 2.2.2 -> 2.2.3
vlc: Fix build with un-renameed native libtool
fltk: upgrade 1.3.7 -> 1.3.8
xfce4-whiskermenu-plugin: upgrade 2.6.2 -> 2.7.1
ristretto: upgrade 0.12.0 -> 0.12.1
mousepad: upgrade 0.5.7 -> 0.5.8
poppler: upgrade 21.11.0 -> 21.12.0
menulibre: upgrade 2.2.1 -> 2.2.3
fluidsynth: upgrade 2.2.3 -> 2.2.4
gegl: upgrade 0.4.30 -> 0.4.34
gimp: upgrade 2.10.24 -> 2.10.30
mpv: upgrade 0.33.1 -> 0.34.0
gupnp: upgrade 1.2.7 -> 1.4.1
gupnp: merge recipe with inc-file
gupnp-av: upgrade 0.12.11 -> 0.14.0 / build with mesa
gupnp-av: merge recipe with inc-file
gupnp-dlna: upgrade 0.10.5 -> 0.12.0 / build with meson
gupnp-igd: upgrade 0.2.5 -> 1.2.0 / build with meson
gupnp-tools: upgrade 0.10.0 -> 0.10.2 / prettify recipe
gtkwave: upgrade 3.3.109 -> 3.3.111
blueman: upgrade 2.2.1 -> 2.2.3
geany: upgrade 1.37.1 -> 1.38
geany-plugins: upgrade 1.37 -> 1.3.8
gnuplot: upgrade 5.4.1 -> 5.4.2
gtksourceview5: initial add 5.2.0
amtk: upgrade 5.2.0 -> 5.3.1 / build with meson
evince: upgrade 40.4 -> 41.3
evolution-data-server: upgrade 3.40.2 -> 3.42.2
gnome-autoar: upgrade 0.3.3 -> 0.4.1 / build with meson
gnome-calculator: upgrade 40.1 -> 41.1
gnome-calendar; upgrade 41.0 -> 41.2
gnome-control-center: upgrade 41.1 -> 41.2
gnome-desktop: upgrade 41.0 -> 41.2
gnome-disk-utility: upgrade 40.1 -> 41.0
gnome-flashback: upgrade 3.40.0 -> 3.42.1
gnome-font-viewer: upgrade 40.0 -> 41.0
gnome-screenshot: upgrade 40.0 -> 41.0
gnome-shell: upgrade 41.0 -> 41.2
gnome-shell-extensions: upgrade 41.0 -> 41.1
gnome-system-monitor: upgrade 40.1 -> 41.0
gnome-terminal: upgrade 3.42.0 -> 3.42.1
gsound: upgrade 1.0.2 -> 1.0.3 / build with meson
gthumb: upgrade 3.10.3 -> 3.12.0
gtksourceview4: upgrade 4.8.1 -> 4.8.2
libgsf: upgrade 1.14.47 -> 1.14.48
libgtkstylus: remove
metacity: upgrade 3.40.0 -> 3.42.0
mutter: upgrade 41.0 -> 41.2
nautilus: upgrade 40.2 -> 41.1
gnome-shell: Add gnome-desktop to RDEPENDS
Drop gnome-desktop3 providers
Rename gnome-menus3 -> gnome-menus
packagegroup-gnome-desktop: Mark TUNE_PKGARCH specific
mozjs-78: Shelve breaking lib rename/linking & split lib to separate package
mozjs-78: renumber patches
gnome-shell-extensions: Enable gnome-classic session for wayland
zenity: Upgrade 3.32.0 -> 3.41.0 / meson build / rework
yelp: upgrade 41.1 -> 41.2
yelp-xsl: upgrade 41.0 -> 41.1
usermode: upgrade 1.113 -> 1.114
sysprof: upgrade 3.42.0 -> 3.42.1
gnome-terminal: upgrade 3.42.1 -> 3.42.2
gnome-panel: upgrade 3.38.0 -> 3.42.0
gnome-autoar: upgrade 0.4.1 -> 0.4.2
evolution-data-server: upgrade 3.42.2 -> 3.42.3
poppler: upgrade 21.12.0 -> 22.01.0
exo: upgrade 4.16.1 -> 4.16.3
imsettings: upgrade 1.8.2 -> 1.8.3
thunar: upgrade 4.16.8 -> 4.16.9
Andrei Gherzan (2):
mosquitto: Don't depends on dlt-daemon unconditionally
python3-pymetno: Introduce recipe on 0.7.0
Andrey Zhizhikin (1):
gpsd: fix clang buid via export CC explicitly
Armin Kuster (6):
ldns: update to 1.8.1
strongswan: provide PACKAGECONFIG for cureve25519
strongswan: add tpm PACKAGECONFIG
strongswan: add integrity options
strongswan: remove redundant DEPENDS
wireshark: update to latest stable 3.4.11
Bartosz Golaszewski (6):
python3-email-validator: new package
libgpiod: ptest: rrecommend python3-unittest when building python tests
libgpiod: ptest: rrecommend coreutils
libgpiod: ptest: redirect stderr to stdout for test executables
cmatrix: new package
python3-zeroconf: bump version 0.36.13 -> 0.38.1
Bhargav Das (1):
python3-colorzero: add recipe for python colorzero
Bruce Ashfield (2):
vboxguestdrivers: fix build against 5.15 kernel/libc-headers headers
python: remove recipes imported to oe-core
Changqing Li (5):
mozjs-78: fix do_configure failure
mozjs-91: fix do_configure failure
mozjs-91/mozjs-78: fix compile failure on centos7
php: correct module name and library name
postgresql: fix CVE-2021-23214,CVE-2021-23222
Christian Eggers (5):
gpsd: remove obsolete files from FILES:${PN}-dev
gpsd: remove obsolete libgpsd package
gpsd: remove obsolete files from FILES:gps-utils
gpsd: list files for gps-utils individually
python3-gcovr: add recipe
Claude Bing (2):
php: update from 7.4.21 to 8.0.12
php: use qemu wrapper to build minilua
Claus Stovgaard (3):
Added usbip-tools for kernel USB/IP
Add gutenprint to meta-oe
Add pycups - python bindings for CUPS
Ed Tanous (1):
Update to new version of boost-uri
Fathi Boudra (1):
makedumpfile: upgrade from 1.6.9 to 1.7.0
Geoff Parker (2):
python3-cchardet: add BBCLASSEXTEND = "native nativesdk"
python3-aiosignal, python3-frozenlist: Add native & nativestdk package support
Gianfranco (2):
vboxguestdrivers: upgrade 6.1.28 -> 6.1.30
vboxguestdrivers: drop md5sum from SRC_URI.
He Zhe (1):
protobuf: Fix static init fiasco
Hongxu Jia (5):
ostree: add nativesdk support
ostree: use Yocto mirror
ostree: workaround compile error with option gcc option -Og
libblockdev: Do not include duplicate entries in bd_lvm_lvs output
grubby: fix conflict with debianutils
Jacob Kroon (1):
Revert "ccid: Fix floating runtime dependency on flex"
Jan Vermaete (6):
netdata: Using the github.com release + upstream_check.
netdata: from 1.22.1 to 1.32.0
netdata: version bump from 1.32.0 to 1.32.1
netdata: fixed some oelint-adv issues in the recipe.
netdata: do not send anonymous statistics by default.
netdata: fix for commit 8554624cc7f84e6b63b2ea4b94ee5fd2821021ca
Jeremy A. Puhlman (1):
cdrkit: remove ${PN} from ${PN}-dev RDEPENDS
Jeremy Kerr (4):
mctp: upgrade to v1.0
mctp: install dbus service configuration
contrib: allow override-style syntax for vars & routines
contrib: fix python warnings for oe-stylize
Joshua Watt (8):
colord: introspection is not valid meson option
gdm: introspection is not valid meson option
gnome-settings-daemon: introspection is not valid meson option
gnome-shell: introspection is not valid meson option
gnome-control-center: Fixup polkit directory permissions
gnome-online-accounts: Switch back to libsoup2
graphene: Move from meta-gnome -> meta-oe
jemalloc: Fix license file
Kai Kang (1):
libqb: use branch main
Khem Raj (97):
bitwise: Fix build with latest ncurses 6.3+
libcdio: Fix build with ncurses 6.3+
nmon: Upgrade to 16m
sysdig: Fix build with ncurses 6.3+
iptraf-ng: Upgrade to 1.2.1
tiptop: Fix build with ncurses 6.3+
mtr: Fix build with ncurses 6.3+
mtr: Explicitly use branch= in SRC_URI
liburing: Use libc mmap() wrapper instead of calling __NR_mmap syscall directly
protobuf: Upgrade to 3.19.1
protobuf: Disable tailcall on mips/clang
packagegroup-meta-python: Add python3-imgtool
python3-prctl: Use https protocol for git fetcher
mozjs-78: Check for big-endian icu data file existence before creating it
mozjs-78: Set X lib/include paths
mozjs-78: Pass C/C++ flags to js configure
libjs-jquery-globalize: Use a proper SHA in SRCREV instead of tag
iptraf-ng: Create /var/log and /var/lib subdirs at runtime
gstd: Remove empty /var/volatile/log
monkey: Keep /var/volatile empty
hiawatha: Create /var/log /var/run at runtime
python3-kivy: Use branch parameter in SRC_URI
mdns: Upgrade to 1310.140.1
packagegroup-meta-networking: Enable mdns on musl systems
ntpsec: Disable seccomp on musl/rv32
ntpsec: Disable documentation
packagegroup-meta-networking: Add ntpsec
sdbus-c++-libsystemd: Fix build with kernel 5.15+
mctp: Fix build with 5.15+ kernel headers
packagegroup-meta-python.bb: Add python3-pytz-deprecation-shim
packagegroup-meta-oe: Add fwupd and fwupd-efi
protobuf-c: Export native protoc
linpack: Build both sp and dp binaries
php: Build minilua for build host
xf86-video-ati: Upgrade to 19.1.0
sdbus-c++-libsystemd: Upgrade to 249.5
xf86-video-nouveau: fixup driver for new X server ABI
tracker: introspection is not valid meson option
gnome-desktop: introspection is not valid meson option
libmediaart: introspection is not valid meson option
libgweather: introspection is not valid meson option
tepl: introspection is not valid meson option
gjs: introspection is not valid meson option
tracker-miners: introspection is not valid meson option
gedit: introspection is not valid meson option
tracker,tracker-miners: Upgrade to 3.2.1
gnome-tweaks: introspection is not valid meson option
colord-gtk: introspection is not valid meson option
packagegroup-meta-python: Add python3-gcovr
ippool: silence a DeprecationWarning
packagegroup-meta-oe: Add pim435
influxdb: Upgrade to 1.8.10
influxdb: Fix build with Go 1.17 on x86_64
packagegroup-core-clutter: Mark TUNE_PKGARCH specific
packagegroup-xfce-base: Mark TUNE_PKGARCH specific
libcamera: Fix build break on musl
meta-networking,meta-python: Fix README for yocto check layer
gjs: Link with libatomic on rv32
ntpsec: Disable seccomp on riscv32
libunix-statgrab: Use compiler driver for linking as well
tbb: Upgrade to 2021.4.0
packagegroup-meta-oe: Add unifex
gjs: Fix build failures with meson 0.60.2
packagegroup-meta-perl: Add new packages
packagegroup-meta-python: Add python3-pymetno
yelp: Add option to support webkit2gtk-4-0
surf: Add soup3 patch conditionally
netdata: Link libatomic on mips
gssdp: Use sniffer only when gnome layer is in mix
packagegroup-meta-oe: Add graphene
inotify-tools: Upgrade to 3.21.9.6
inotify-tools: Disable -Werror
python3-matplotlib: Generate correctly names setup config file
inotify-tools: Fix build on musl
libkcapi: Fix build with musl
packagegroup-meta-oe: Add gutenprint, python3-pycups and usbip-tools
tvheadend: Disable dvbscan
pkcs11-helper: Fix build with nss >= 3.73.1
tbb: Disable LTO on rv64
packagegroup-meta-python: Add python3-colorzero
packagegroup-meta-oe: Add cmatrix
pcp: Fix build to exclude qt5
packagegroup-meta-oe: Add dool and pcp
nautilus: Fix build with libportal >= 0.5
influxdb: Enable network during do_compile
meta-oe: Use setuptools3-base
thunar: Depend on libxml-parser-perl-native
python3-matplotlib: Do not use setuptools_scm_git_archive
python3-pytest-helpers-namespace: Enable network during do_compile
python3-pybind11: Use setuptools3 instead of distutils3 functions
pcp: Fix build race condition
tnftp: Add missing header stdc-predef.h
jemalloc: Fix build with glibc 2.35+clang
packagegroup-meta-oe: Add duktape
iotop: Use lld with clang on arm
meta-xfce: Convert catfish and menulibre to use setuptools3
sdbus-c++-libsystemd: Fix build on musl
Konrad Weihmann (3):
python3-wtforms: add missing dependencies
python3-execnet: depend on setuptools-scm
python3-lazy-object-proxy: upgrade 1.6.0 > 1.7.1
Lei Maohui (1):
sysprof: Added json-glib into DEPENDS to fix build error.
Leif Middelschulte (1):
dbus-daemon-proxy: add missing `return` statement
Leon Anavi (92):
python3-qrcode: Upgrade 7.3 -> 7.3.1
python3-bidict: Upgrade 0.21.2 -> 0.21.4
python3-pint: Upgrade 0.17 -> 0.18
python3-prettytable: Upgrade 2.2.1 -> 2.3.0
python3-astroid: Upgrade 2.8.2 -> 2.8.4
python3-isort: Upgrade 5.9.3 -> 5.10.0
python3-aenum: Upgrade 3.1.0 -> 3.1.2
python3-natsort: Upgrade 7.1.1 -> 8.0.0
python3-cachecontrol: Upgrade 0.12.6 -> 0.12.9
python3-wrapt: Upgrade 1.13.2 -> 1.13.3
python3-prettytable: Upgrade 2.3.0 -> 2.4.0
python3-imageio: Upgrade 2.10.1 -> 2.10.3
python3-pytz-deprecation-shim: Add recipe
python3-tzlocal: Upgrade 4.0.1 -> 4.1
python3-soupsieve: Upgrade 2.2.1 -> 2.3
python3-configparser: Upgrade 5.0.2 -> 5.1.0
python3-yappi: Upgrade 1.3.2 -> 1.3.3
python3-pydicti: Upgrade 1.1.4 -> 1.1.6
python3-zeroconf: Upgrade 0.36.9 -> 0.36.12
python3-yarl: Upgrade 1.7.0 -> 1.7.2
python3-elementpath: Upgrade 2.3.2 -> 2.4.0
python3-astroid: Upgrade 2.8.4 -> 2.8.5
python3-coverage: Upgrade 6.1.1 -> 6.1.2
python3-aenum: Upgrade 3.1.3 -> 3.1.5
python3-zeroconf: Upgrade 0.36.12 -> 0.36.13
python3-bandit: Uprade 1.7.0 -> 1.7.1
python3-colorlog: Upgrade 6.5.0 -> 6.6.0
python3-soupsieve: Upgrade 2.3 -> 2.3.1
python3-cchardet: Add recipe
python3-charset-normalizer: Add recipe
python3-frozenlist: Add recipe
python3-aiosignal: Add recipe
python3-aiohttp: Upgrade 3.8.0 -> 3.8.1
packagegroup-meta-python.bb: Add new packages
python3-eventlet: Upgrade 0.32.0 -> 0.33.0
python3-imageio: Upgrade 2.10.3 -> 2.10.5
python3-deprecated: Upgrade 1.2.12 -> 1.2.13
python3-parso: Add runtime dependencies
python3-jedi: Upgrade 0.18.0 -> 0.18.1
python3-prompt-toolkit: Upgrade 3.0.21 -> 3.0.22
python3-imageio: Upgrade 2.10.5 -> 2.11.0
python3-cmd2: Upgrade 2.3.0 -> 2.3.1
python3-simplejson: Upgrade 3.17.5 -> 3.17.6
python3-aiohue: Upgrade 2.6.3 -> 3.0.1
python3-imageio: Upgrade 2.11.0 -> 2.11.1
python3-marshmallow: Upgrade 3.14.0 -> 3.14.1
python3-jsonpointer: Upgrade 2.1 -> 2.2
python3-humanize: Upgrade 3.12.0 -> 3.13.1
python3-cachecontrol: Upgrade 0.12.9 -> 0.12.10
python3-prompt-toolkit: Upgrade 3.0.22 -> 3.0.24
python3-isodate: Upgrade 0.6.0 -> 0.6.1
python3-pychromecast: Upgrade 10.1.1 -> 10.2.3
python3-imageio: Upgrade 2.13.3 -> 2.13.5
python3-psutil: Upgrade 5.8.0 -> 5.9.0
python3-astroid: Upgrade 2.9.0 -> 2.9.2
python3-robotframework: Upgrade 4.1.2 -> 4.1.3
python3-cantools: Upgrade 37.0.0 -> 37.0.1
python3-diskcache: Upgrade 5.3.0 -> 5.4.0
python3-typeguard: Upgrade 2.13.2 -> 2.13.3
python3-huey: Upgrade 2.4.2 -> 2.4.3
python3-ujson: Upgrade 5.0.0 -> 5.1.0
python3-google-api-core: Upgrade 2.2.0 -> 2.3.2
python3-astroid: Upgrade 2.9.2 -> 2.9.3
python3-urllib3: Upgrade 1.26.7 -> 1.26.8
python3-rdflib: Upgrade 6.0.2 -> 6.1.1
python3-bitarray: Upgrade 2.3.4 -> 2.3.5
python3-asyncio-throttle: Add recipe
python3-aiohue: Upgrade 3.0.1 -> 3.0.11
python3-requests: Upgrade 2.26.0 -> 2.27.1
python3-natsort: Upgrade 8.0.0 -> 8.0.2
python3-sentry-sdk: Upgrade 1.4.3 -> 1.5.2
python3-regex: Upgrade 2021.10.8 -> 2021.11.10
python3-wtforms: Upgrade 3.0.0 -> 3.0.1
python3-charset-normalizer: Upgarde 2.0.7 -> 2.0.10
python3-gmpy2: Upgrade 2.1.1 -> 2.1.2
python3-jdatetime: Upgrade 3.6.4 -> 3.8.1
python3-fasteners: Upgrade 0.16.3 -> 0.17.2
python3-jsmin: Upgrade 3.0.0 -> 3.0.1
python3-croniter: Upgrade 1.1.0 -> 1.2.0
python3-fastjsonschema: Upgrade 2.15.1 -> 2.15.3
python3-aenum: Upgrade 3.1.5 -> 3.1.6
python3-decorator: Upgrade 5.1.0 -> 5.1.1
python3-pythonping: Upgrade 1.1.0 -> 1.1.1
python3-dnspython: Upgrade 2.1.0 -> 2.2.0
python3-frozenlist: Upgrade 1.2.0 -> 1.3.0
python3-simpleeval: Upgrade 0.9.10 -> 0.9.12
python3-twine: Upgrade 3.4.1 -> 3.7.1
python3-pillow: Upgrade 8.3.2 -> 9.0.0
python3-pycocotools: Upgrade 2.0.2 -> 2.0.4
python3-paramiko: Upgrade 2.9.1 -> 2.9.2
python3-sentry-sdk: Upgrade 1.5.2 -> 1.5.3
imageio: Upgrade 2.13.5 -> 2.14.0
Luca Boccassi (2):
lvm2: do not install systemd units/initscripts when building native SDK tools
Add recipe for duktape
Marek Vasut (4):
libsdl2-ttf: Remove incorrect x11 from REQUIRED_DISTRO_FEATURES
freerdp: Upgrade 2.3.0 -> 2.4.1
freerdp: Add missing libusb1 dependency
freerdp: Make PCSC dependency optional
Mark Hatle (1):
python3-matplotlib: Disable automatic download during do_compile
Markus Volk (5):
libgdata: add vala PACKAGECONFIG
gspell: inherit vala
gmime: inherit vala
evolution-data-server: cleanup; enable vala introspection
folks: initial add recipe
Martin Jansa (7):
nodejs: fix build without scrypt
unicode-ucd: set downloadfilename to include PV
ntpsec: require x11 in DISTRO_FEATURES
libgusb: add PACKAGECONFIG for vapi and keep it enabled only when introspection is
Revert "libgusb: Use the correct args to disable vala support"
packagegroup-meta-multimedia: include x265 only with commercial in LICENSE_FLAGS_WHITELIST
simple-mtpfs: add dependency on autoconf-archive
Matthias Klein (2):
paho-mqtt-c: upgrade 1.3.8 -> 1.3.9
paho-mqtt-cpp: new package
Mauro Anjo (2):
Upgrade libcamera
libcamera: Update to latest commit
Michael Vetter (1):
jasper: upgrade 2.0.26 -> 2.0.33
Mingli Yu (6):
mariadb: Fix openssl 3.x compatibility
libteam: switch to python3
libteam: improve the ptest output
php: Upgrade to 8.1.0
php: avoid textrel QA Issue warning
python3-lxml: check the return value
Nisha Parrakat (1):
nodejs_16.11.1.bb: only handle npm if configured
Oleksandr Kravchuk (48):
python3-protobuf: update to 3.19.0
python3-google-api-core: update to 2.2.0
python3-google-api-python-client: update to 2.28.0
python3-imageio: update to 2.10.1
python3-pybind11: update to 2.8.1
liburing: update to 2.1
protobuf: update to 3.19.0
wolfssl: update to 5.0.0
fb-test: fix SRC_URI
bmon: fix PV
cpuid: update to 20211129
gtk4: set UPSTREAM_CHECK_REGEX to stable versions
iwd: update to 1.20
libnma: update to 1.8.32
python3-astroid: update to 2.9.0
python3-coverage: update to 6.2
python3-croniter: update to 1.1.0
python3-diskcache: update to 5.3.0
python3-graphviz: update to 0.19
python3-imageio: update to 2.13.3
python3-iso8601: update to 1.0.2
python3-ldap: update to 3.4.0
python3-lz4: update to 3.1.10
python3-matplotlib: update to 3.5.1
python3-pymetno: update to 0.9.0
python3-pywbem: update to 1.3.0
python3-redis: update to 4.0.2
python3-wtforms: update to 3.0.0
soci: update to 4.0.2
uftrace: update to 0.11
librdkafka: update to 1.8.2
gparted: add UPSTREAM_CHECK_URI
libwacom: update to 1.12
libsrtp: update to 2.4.2
dbus-cxx: update to 2.1.0
sysprof: update to 3.42.0
gssdp: update to 1.4.0.1
libkcapi: update to 1.3.1
python3-lxml: update to 4.7.1
python3-icu: update to 2.8
python3-googleapis-common-protos: update to 1.54.0
python3-gevent: update to 21.12.0
python3-twitter: update 4.4.0
python3-contextlib2: update to 21.6.0
simple-mtpfs: update to 0.4.0
xl2tpd: update to 1.3.16
python-cantools: update to 37.0.0
lirc: replace setuptools3-bas with distutils-common-base
Ovidiu Panait (1):
syslog-ng: adjust control socket location
Patrick Williams (1):
unifex: add recipe
Peter Kjellerstedt (16):
libssh: Support building for native and nativesdk
corosync: Clean up leftover support for qdevice and qnetd
corosync: Do not install the /var/log/cluster directory
collectd: Do not install /var/log
atop: Do not install the /var/log/atop directory
openflow: Create /var/log/openflow in runtime
mongodb: A little clean up
mongodb: Create /var/log/mongodb in runtime
opensaf: Create /var/log/opensaf/saflog in runtime
opensaf: Make sure a file needed by opensafd.service is not removed
gattlib: Explicitly disable Python support
googletest: Switch branch from master to main
libsrtp: Add support for specifying the crypto library
nodejs: Drop workaround for a Python 2 dependency
nodejs: Drop workaround for an absolute path in the npm shebang
nodejs: A little clean up
Philip Balister (1):
fftw: Update to fftw-3.3.10
Philippe Coval (7):
lv-drivers: Lint recipe
lv-lib-png: Lint recipe
lvgl: Introduce global variable for configuration
lvgl: Add hints about using configuration variables
lvgl: Support external wayland config
lvgl: Update to 8.1.0
pim435: Add recipe for C implementation for userspace driver app
Pierre-Jean Texier (1):
libmxml: upgrade 3.2 -> 3.3
Ramon Fried (1):
bitwise: Upgrade 0.42 -> 0.43
Richard Hughes (4):
libgusb: Use the correct args to disable vala support
libjcat: Update to 0.1.9
libxmlb: Update to 0.3.6
fwupd: Update to 1.7.3
Richard Purdie (1):
recipes: Update SRC_URI branch and protocols
Robert Joslyn (2):
htop: Update to 3.1.2
postgresql: Update to 14.1
Ross Burton (58):
python3-imgtool: add recipe
modemmanager: remove intltool-native DEPENDS
python3-cryptography: backport patches to make this work against OpenSSL 3
fwupd-efi: add new recipe
fwupd: add new recipe
nginx: use ln -rs
libxmlb: put binary into separate package
imlib2: clarify license
xmlrpc-c: set precise BSD license
xmlrpc-c: remove unused libxml2 dependency
xmlrpc-c: clean up PACKAGECONFIG
xmlrpc-c: use gnu-configize
dash: set precise BSD license
sg3-utils: set precise BSD license
nodejs: set precise BSD license
libkcapi: remove DEPENDS on target libtool
libkcapi: set precise BSD license
pcsc-lite: set precise BSD license
python3-cryptography: set precise BSD license
python3-crypto-vectors: set precise BSD license
python3-gevent: use system libraries instead of embedding
python3-gevent: update license
python3-lxml: set precise BSD license
python3-posix-ipc: set precise BSD license
python3-posix-ipc: remove spurious dependencies
python3-pyzmq: set precise BSD license
fwupd: upgrade to 1.7.2
fwupd: fix dependency typo
net-snmp: use precise BSD license
gnome-themes-extra: set correct SRC_URI
qpdf: remove obsolete support for renamed libtool
php: remove obsolete support for renamed libtool
dhcp-relay: remove obsolete support for renamed libtool
apache2: remove obsolete support for renamed libtool
xfsdump: remove obsolete support for renamed libtool
unbound: remove obsolete support for renamed libtool
cpufrequtils: remove obsolete support for renamed libtool
gtk+: remove obsolete support for renamed libtool
apache-websocket: remove obsolete support for renamed libtool
srecord: remove obsolete support for renamed libtool
srecord: add libgcrypt PACKAGECONFIG
srecord: properly initialize libtool
dhcp-relay: fix rebuilds
tbb: enable native/nativesdk builds
fwts: do out-of-tree builds
tbb: upgrade to 2021.5.0
python3-scapy: remove redundant pycrypto RDEPENDS
python3-smbbus: use DISTUTILS_SETUP_PATH
python3-pycrypto: remove obsolete pycrypto module
python3-smbus: use setuptools
python3-greenlet: remove redundant distutils3 inherit
python3-hexdump: remove
python3-pyparted: port to setuptools
python3-dbussy: port to setuptools
cxxtest: move to setuptools
iotop: move to the C port of iotop
sanlock: port to setuptools
pyxdg: upgrade and remove distutils
Sakib Sajal (2):
io-compress-lzma-perl: add recipe for version 2.096
nss: upgrade 3.64 -> 3.73.1
Salman Ahmed (2):
openldap: upgrade 2.4.58 -> 2.5.8
python3-ldap: for openldap v2.5.8, link with libldap instead of libldap_r
Sean Nyekjaer (1):
msgpack-cpp: fix msgpack-cpp is a header only library
Stanislav Angelovic (1):
Bump sdbus-c++ to version v1.0.0
Tim Orling (12):
python3-gammu: add recipe for v3.2.4
python3-setuptools-rust-native: add v1.1.2 recipe
python3-pyruvate: add recipe for v1.1.2
python3-pytest-subtests: upgrade 0.5.0 -> 0.6.0
python3-cryptography-vectors: upgrade 35.0.0 => 36.0.1
python3-cryptography: upgrade 3.3.2 -> 36.0.1
gammu: upgrade 1.32.0 -> 1.42.0
tiptop: update download URL and HOMEPAGE
cmocka: use https protocol for fetching
pyo3.bbclass: add class for PyO3 cross-compilation
setuptools3_rust.bbclass: setuptoools Rust plugin
python3-pyruvate: disable 64 bit atomics for mips
Trevor Gamblin (7):
python3-pycparser: RSUGGESTS cpp and cpp-symlinks
libnftnl: upgrade 1.2.0 -> 1.2.1
python3-django: upgrade 3.2.5 -> 3.2.10
libnftnl: add ptest
python3-django: upgrade 2.2.25 -> 2.2.26
python3-django: upgrade 3.2.10 -> 3.2.11
python3-django: Add recipe for 4.0.1
Wang Mingyu (10):
gsl: upgrade 2.7 -> 2.7.1
mozjs: upgrade 91.2.0 -> 91.4.0
libgusb: upgrade 0.3.8 -> 0.3.9
python3-pychromecast: upgrade 10.1.0 -> 10.1.1
python3-websocket-client: upgrade 1.2.1 -> 1.2.3
python3-sqlalchemy: upgrade 1.4.27 -> 1.4.28
dnf-plugin-tui: Fix bug when generating CSV file
sdbus-c++-tools: upgrade 1.0.0 -> 1.1.0
sdbus-c++-libsystemd: upgrade 249 -> 250.3
fmt: upgrade 8.0.1 -> 8.1.1
William A. Kennington III (2):
ipmitool: Split ipmievd into a separate package
jq: upgrade 1.6 -> 2021-10-24 git
Windel Bouwman (1):
python3-coloredlogs: Added nativesdk
Xu Huan (35):
python3-websockets: upgrade 10.0 -> 10.1
python3-xlsxwriter: upgrade 3.0.1 -> 3.0.2
python3-socketio: upgrade 5.4.1 -> 5.5.0
python3-pymongo: upgrade 3.12.0 -> 4.0
python3-pyephem: upgrade 4.1 -> 4.1.1
python3-pycparser: upgrade 2.20 -> 2.21
python3-aiofiles: upgrade 0.7.0 -> 0.8.0
python3-bitstruct: upgrade 8.11.1 -> 8.12.1
python3-cmd2: upgrade 2.3.1 -> 2.3.3
python3-configparser: upgrade 5.1.0 -> 5.2.0
python3-rsa: upgrade 4.7.2 -> 4.8
python3-django: upgrade 2.2.24 -> 2.2.25
python3-gnupg: upgrade 0.4.7 ->0.4.8
python3-graphviz: upgrade 0.19 -> 0.19.1
python3-gmpy2: upgrade 2.1.0rc1 -> 2.1.1
python3-grpcio: upgrade 1.41.1 -> 1.43.0
python3-sqlalchemy: upgrade 1.4.28 ->1.4.29
python3-pyro4: upgrade 4.81 -> 4.82
python3-huey: upgrade 2.4.1 -> 2.4.2
python3-msgpack: upgrade 1.0.2 -> 1.0.3
python3-smpplib: upgrade 2.2.0 -> 2.2.1
python3-wheel: upgrade 0.37.0 -> 0.37.1
python3-meh: upgrade 0.50 -> 0.50.1
python3-pandas: upgrade 1.3.4 -> 1.3.5
python3-paramiko: upgrade 2.8.0 ->2.9.1
python3-parso: upgrade 0.8.2 -> 0.8.3
python3-protobuf: upgrade 3.19.0 ->3.19.3
python3-pymongo: upgrade 4.0 -> 4.0.1
python3-pynacl: upgrade 1.4.0 -> 1.5.0
python3-pytest-timeout: upgrade 2.0.1 -> 2.0.2
python3-socketio: upgrade 5.5.0 -> 5.5.1
python3-argcomplete upgrade 1.12.3 -> 2.0.0
python3-async-timeout: upgrade 4.0.0 -> 4.0.2
python3-engineio: upgrade 4.3.0 -> 4.3.1
python3-google-api-python-client: upgrade 2.33.0 -> 2.36.0
Yi Zhao (31):
netplan: fix hardcoded path for /lib/netplan
libssh: use https instead of git in SRC_URI
strongswan: add required kernel modules to RRECOMMENDS
libldb: upgrade 2.3.0 -> 2.3.2
samba: upgrade 4.14.8 -> 4.14.10
libtalloc: fix pyext_PATTERN for cross compilation
libtdb: fix pyext_PATTERN for cross compilation
libtevent: fix pyext_PATTERN for cross compilation
libldb: fix pyext_PATTERN for cross compilation
samba: fix pyext_PATTERN for cross compilation
samba: add pyldb to rdepends for samba-python3
samba: update cross-answers files
openldap: fix parallel build failure
openldap: upgrade 2.5.8 -> 2.5.9
openldap: fix strip issue with new patch
postfix: upgrade 3.6.2 -> 3.6.3
openipmi: upgrade 2.0.31 -> 2.0.32
xmlsec1: enable native build
upower: add UPSTREAM_CHECK_GITTAGREGEX
lvm2: add UPSTREAM_CHECK_GITTAGREGEX
ndctl: add UPSTREAM_CHECK_GITTAGREGEX
nftables: upgrade 1.0.0 -> 1.0.1
ipset: upgrade 7.11 -> 7.15
libnetfilter-queue: upgrade 1.0.3 -> 1.0.5
bridge-utils: upgrade 1.7 -> 1.7.1
iscsi-initiator-utils: upgrade 2.1.4. -> 2.1.5
openldap: ignore the mkdir errors in Makefile
tnftp: upgrade 20151004 -> 20210827
dracut: upgrade 051 -> 055
tree: upgrade 2.0.0 -> 2.0.1
postfix: upgrade 3.6.3 -> 3.6.4
Zheng Ruoqin (4):
spitools: upgrade 1.0.0 -> 1.0.1
python3-rdflib: upgrade 6.0.0 -> 6.0.2
python3-typeguard: upgrade 2.13.0 -> 2.13.2
python3-ujson: upgrade 4.2.0 -> 4.3.0
leimaohui (5):
dstat: Deleted terminated project.
pcp: Added a new recipe which provides dstat command.
dool: Added a new OSS that forked from dstat project.
xrdp: Fixed build error with openssl 3.0 and upgraded from 0.9.17 to 0.9.18.
xorg-xrdp: Upgraded from 0.2.5 to 0.2.18.
mk (1):
python3-marshmallow: add recipe at version 3.14.0
wangmy (79):
avro-c: upgrade 1.10.2 -> 1.11.0
botan: upgrade 2.18.1 -> 2.18.2
c-ares: upgrade 1.17.2 -> 1.18.1
grpc: upgrade 1.41.0 -> 1.41.1
libcrypt-openssl-guess-perl: upgrade 0.13 -> 0.14
fetchmail: upgrade 6.4.21 -> 6.4.23
iwd: upgrade 1.18 -> 1.19
debootstrap: upgrade 1.0.124 -> 1.0.126
jsoncpp: upgrade 1.9.4 -> 1.9.5
python3-aenum: upgrade 3.1.2 -> 3.1.3
python3-aiohttp: upgrade 3.7.4 -> 3.8.0
python3-async-timeout: upgrade 3.0.1 -> 4.0.0
python3-fastnumbers: upgrade 3.1.0 -> 3.2.1
python3-google-api-python-client: upgrade 2.28.0 -> 2.30.0
python3-graphviz: upgrade 0.17 -> 0.18
python3-httplib2: upgrade 0.20.1 -> 0.20.2
openvpn: Change the default cipher to AES-256-GCM for server configurations
ctags: upgrade 5.9.20210905.0 -> 5.9.20211114.0
libmbim: upgrade 1.26.0 -> 1.26.2
smcroute: upgrade 2.5.3 -> 2.5.4
python3-absl: upgrade 0.15.0 -> 1.0.0
python3-alembic: upgrade 1.7.4 -> 1.7.5
python3-cmd2: upgrade 2.2.0 -> 2.3.0
python3-gast: upgrade 0.5.2 -> 0.5.3
python3-isort: upgrade 5.10.0 -> 5.10.1
python3-pychromecast: upgrade 9.3.1 -> 10.1.0
python3-sqlalchemy: upgrade 1.4.26 -> 1.4.27
wireguard-tools: upgrade 1.0.20210315 -> 1.0.20210914
cryptsetup: upgrade 2.4.1 -> 2.4.2
libqb: upgrade 2.0.3 -> 2.0.4
qpdf: upgrade 10.3.2 -> 10.4.0
tesseract: upgrade 4.1.1 -> 4.1.3
thin-provisioning-tools: upgrade 0.8.5 -> 0.9.0
xmlsec1: upgrade 1.2.32 -> 1.2.33
libnetfilter-log: upgrade 1.0.1 -> 1.0.2
python3-autobahn: upgrade 21.3.1 -> 21.11.1
pure-ftpd: upgrade 1.0.49 -> 1.0.50
icewm: upgrade 2.8.0 -> 2.9.0
ostree: upgrade 2021.5 -> 2021.6
ply: upgrade 2.1.1 -> 2.2.0
pps-tools: upgrade 1.0.2 -> 1.0.3
dnf-plugin-tui: Fix a bug with newer version rpm.
snort: upgrade 2.9.18.1 -> 2.9.19
cloc: upgrade 1.90 -> 1.92
python3-scrypt: upgrade 0.8.18 -> 0.8.19
fio: upgrade 3.28 -> 3.29
mpich: upgrade 3.4.2 -> 3.4.3
nano: upgrade 5.9 -> 6.0
redis-plus-plus: upgrade 1.3.2 -> 1.3.3
satyr: upgrade 0.38 -> 0.39
qpdf: upgrade 10.4.0 -> 10.5.0
tree: upgrade 1.8.0 -> 2.0.0
libfile-slurper-perl: upgrade 0.012 -> 0.013
libio-socket-ssl-perl: upgrade 2.072 -> 2.073
python3-ipython: upgrade 7.28.0 -> 7.30.1
apache2: upgrade 2.4.51 -> 2.4.52
python3-pyhamcrest: upgrade 2.0.2 -> 2.0.3
python3-pymisp: upgrade 2.4.148 -> 2.4.152
weechat: upgrade 3.0 -> 3.4
wolfssl: upgrade 5.0.0 -> 5.1.0
pkcs11-helper: upgrade 1.27 -> 1.28
bats: upgrade 1.4.1 -> 1.5.0
doxygen: upgrade 1.9.2 -> 1.9.3
pcsc-tools: upgrade 1.5.7 -> 1.5.8
dnfdragora: upgrade 1.1.2 -> 2.1.2
iwd: upgrade 1.20 -> 1.21
python3-pyscaffold: upgrade 4.1.1 -> 4.1.4
python3-supervisor: upgrade 4.2.2 -> 4.2.4
rdma-core: upgrade 36.0 -> 38.0
nlohmann-json: upgrade 3.10.4 -> 3.10.5
protobuf: upgrade 3.19.1 -> 3.19.3
uriparser: upgrade 0.9.5 -> 0.9.6
mtr: upgrade 0.94 -> 0.95
networkmanager: upgrade 1.32.12 -> 1.34.0
cryptsetup: upgrade 2.4.2 -> 2.4.3
cups-filters: upgrade 1.27.2 -> 1.28.11
libmodbus: upgrade 3.1.6 -> 3.1.7
libsdl2-ttf: upgrade 2.0.15 -> 2.0.18
monit: upgrade 5.29.0 -> 5.30.0
zangrc (1):
python3-smpplib: upgrade 2.1.0 -> 2.2.0
zhengruoqin (18):
python3-cantools: upgrade 36.4.0 -> 36.5.0
python3-coverage: upgrade 6.0.2 -> 6.1.1
python3-cycler: upgrade 0.10.0 -> 0.11.0
python3-engineio: upgrade 4.2.1 -> 4.3.0
python3-grpcio-tools: upgrade 1.41.0 -> 1.41.1
python3-grpcio: upgrade 1.41.0 -> 1.41.1
python3-ujson: upgrade 4.3.0 -> 5.0.0
chrony: upgrade 4.1 -> 4.2
openvpn: upgrade 2.5.4 -> 2.5.5
samba: upgrade 4.14.10 -> 4.14.11
libnet-dns-perl: upgrade 1.32 -> 1.33
byacc: upgrade 20210808 -> 20211224
glmark2: upgrade 2021.02 -> 2021.12
python3-djangorestframework: upgrade 3.12.4 -> 3.13.1
python3-google-api-python-client: upgrade 2.30.0 -> 2.33.0
python3-networkx: upgrade 2.6.2 -> 2.6.3
python3-pyatspi: upgrade 2.38.1 -> 2.38.2
pugixml: upgrade 1.11.2 -> 1.11.4
poky: d78650b980..27ff420543:
Adrian Freihofer (1):
runqemu: support rootfs mounted ro
Alejandro Hernandez Samaniego (3):
tclibc-newlib: Supply missing /bin/sh target in newlib sdk
tclibc-baremetal: Supply missing /bin/sh target in the baremetal sdk
gcc-cross-canadian: Fix cross canadian compiler for baremetal targets
Alexander Kanavin (262):
runqemu: unbreak non-gl displays
curl: submit patch upstream
libxml2: submit patch upstream
psplash: upgrade to latest revision
python3-gitdb: upgrade 4.0.7 -> 4.0.9
python3-pyparsing: upgrade 3.0.0 -> 3.0.4
vala: upgrade 0.54.2 -> 0.54.3
asciidoc: upgrade 10.0.0 -> 10.0.1
lighttpd: upgrade 1.4.60 -> 1.4.61
stress-ng: upgrade 0.13.00 -> 0.13.06
mesa: upgrade 21.2.4 -> 21.2.5
linux-firmware: upgrade 20210919 -> 20211027
puzzles: upgrade to latest revision
libsoup: upgrade 3.0.1 -> 3.0.2
libsoup-2.4: upgrade 2.74.0 -> 2.74.1
nghttp2: upgrade 1.45.1 -> 1.46.0
diffoscope: upgrade 188 -> 189
gawk: update 5.1.0 -> 5.1.1
cmake: update 3.21.3 -> 3.21.4
ffmpeg: update 4.4 -> 4.4.1
icu: update 69.1 -> 70.1
librsvg: update 2.52.2 -> 2.52.3
xf86-video-intel: update to latest commit
cracklib: update 2.9.5 -> 2.9.7
cracklib: patches submitted upstream
docbook-xml: patch is not upstreamable
lrzsz: patch is not upstreamable
libjitterentropy: upgrade 3.3.0 -> 3.3.1
gdbm: upgrade 1.19 -> 1.22
perl: backport gdbm 1.2x compatibility fixes
valgrind: mark ptest-specific patch as inappropriate
systemd-bootchart: submit musl patches upstream
librsvg: set the needed atomic configuration flags directly per-target
libxml2: mark patch as non-upstreamable
libpcre/libpcre2: correct SRC_URI
ovmf: submit patch upstream
mesa-demos: drop glx option and patch
mesa-demos: mark glew/glu patch as non-upstreamable
xserver-xorg: update 1.20.13 -> 21.1.1
xserver-xorg: convert from autotools to meson
xserver-xorg: add missing libtirpc dependency
rust: update 1.56.0 -> 1.56.1
libgpg-error: update 1.42 -> 1.43
socat: upgrade 1.7.4.1 -> 1.7.4.2
kexec-tools: update 2.0.22 -> 2.0.23
python3-hypothesis: upgrade 6.24.0 -> 6.24.2
python3-numpy: upgrade 1.21.3 -> 1.21.4
python3-packaging: upgrade 21.0 -> 21.2
python3-pbr: upgrade 5.6.0 -> 5.7.0
python3-py: upgrade 1.10.0 -> 1.11.0
python3-setuptools: upgrade 58.3.0 -> 58.5.3
python3-pyparsing: update 3.0.4 -> 3.0.5
vulkan-samples: update to latest revision
gnu-config: update to latest revision
libgpg-error: mark patch as non-upstreamable
valgrind: submit patch upstream
meson: upgrade 0.59.2 -> 0.60.1
shared-mime-info: fix meson 0.60 builds
webkitgtk: submit patches upstream
webkitgtk: remove unneeded patch
spirv-headers: PV should be 1.5.4
ovmf: submit patch upstream
weston: submit patch upstream
db: mark all patches as non-upstreamable
unzip/zip: mark all patches as non-upstreamable
automake: update 1.16.3 -> 1.16.5
libunistring: address automake 1.16.5 failures
gettext: address automake 1.16.5 failures
ccache: upgrade 4.4.2 -> 4.5
python3-hypothesis: upgrade 6.24.2 -> 6.24.3
python3-pyparsing: upgrade 3.0.5 -> 3.0.6
asciidoc: upgrade 10.0.1 -> 10.0.2
libpipeline: upgrade 1.5.3 -> 1.5.4
diffoscope: upgrade 190 -> 192
piglit: upgrade to latest revision
systemd: upgrade 249.5 -> 249.6
xwayland: upgrade 21.1.2 -> 21.1.3
librstd-rs: submit patches upstream
curl: update 7.79.1 -> 7.80.0
librsvg: update 2.52.3 -> 2.52.4
libsamplerate0: update 0.1.9 -> 0.2.2
patches: correct whitespace/spelling for Upstream-Status tags
autoconf: add missing Upstream-Status to patches
libxml2: add missing Upstream-Status tag
unfs3: add missing Upstream-Status tag
kea: add missing Upstream-Status to a patch
libnl: add missing Upstream-Status tag
rust-hello-world: add missing Upstream-Status to a patch
numactl: add missing Upstream-Status to a patch
expect: do not install examples, drop related patch
slang: mark patch as inappropriate for upstream submission
busybox: drop 0001-Use-CC-when-linking-instead-of-LD-and-use-CFLAGS-and.patch
librsvg: submit system-deps patch upstream
groff: include references to corresponding upstream commits in a patch
logrotate: add a link to upstream review for one of the patch
glib-2.0: submit patch upstream
ell: remove unneeded patch
apt: drop unneeded chunk from a musl patch, submit the rest upstream
diffstat: remove unneeded patch
dpkg: replace a patch with a tweak to an already existing sed fixup
elfutils: update 0.185 -> 0.186
elfutils: submit patch upstream
weston: mark patch as denied
gptfdisk: submit patch upstream
git: update 2.33.1 -> 2.34.0
cmake: update 3.21.4 -> 3.22.0
systemd: update 249.6 -> 249.7
vulkan: update 1.2.191.0 -> 1.2.198.0
bind: update 9.16.22 -> 9.16.23
python3-packaging: update 21.2 -> 21.3
python3-setuptools: update 58.5.3 -> 59.2.0
libcomps: remove unneeded patch
libdnf: submit patches upstream
meson: submit patch upstream
perl-cross: submit patches upstream
perl: submitted patch upstream
testimage.bbclass: request the use of kvm by default
go-helloworld: update to latest revision
go-helloworld: test at runtime
python3-rfc3339/3986-validator: correct upstream version check
go: update 1.16.10 -> 1.17.3
ovmf: remove patch merged upstream
insane.bbclass: add a check that Upstream-Status patch tag is present and correctly formed
perl: replace a patch with a config option
meson: configure and use generic exe_wrapper
perlcross: do not copy ${S}/patches into sysroot
python3: mark patch as inappropriate, with better explanation
vala: submit patch upstream
valgrind: remove unneeded patch
lighttpd: remove unneeded (since meson switch) patch
stress-ng: submit patch upstream
zstd: submit patch upstream
sudo: submit patch upstream
adwaita-icon-theme: submit patch upstream
igt-gpu-tools: correct patch status
wayland: drop unnecessary patch
xserver-xorg: remove unneeded patch
kexec-tools: drop unneeded patch
piglit: submit patches upstream
systemtap: submit patch upstream
ffmpeg: submit patch upstream
libfm: submit patches upstream
libgcrypt: submit patch upstream
libgpg-error: submit patch upstream
lttng: submit patches upstream
rustfmt: remove the recipe
python3-pycryptodome: update to 3.12.0
strace: update 5.14 -> 5.15
cups: update 2.3.3op2 -> 2.4.0
erofs-utils: update 1.3 -> 1.4
rust: update 1.56.1 -> 1.57.0
git: upgrade 2.34.0 -> 2.34.1
go: update 1.17.3 -> 1.17.4
libunwind: update 1.6.0 -> 1.6.2
libseccomp: update 2.5.2 -> 2.5.3
bitbake: fetch2/wget: do not hardcode tarball compressors in version check
ruby: update 3.0.2 -> 3.0.3
glib-2.0: upgrade 2.70.1 -> 2.70.2
ell: upgrade 0.45 -> 0.46
ccache: upgrade 4.5 -> 4.5.1
mmc-utils: upgrade to latest revision
python3-hypothesis: upgrade 6.24.3 -> 6.30.0
python3-markdown: upgrade 3.3.4 -> 3.3.6
python3-more-itertools: upgrade 8.11.0 -> 8.12.0
python3-pbr: upgrade 5.7.0 -> 5.8.0
python3-ruamel-yaml: upgrade 0.17.16 -> 0.17.17
python3-setuptools: upgrade 59.2.0 -> 59.4.0
freetype: upgrade 2.11.0 -> 2.11.1
harfbuzz: upgrade 3.1.1 -> 3.1.2
vulkan-loader: upgrade 1.2.198.0 -> 1.2.198.1
mesa: upgrade 21.3.0 -> 21.3.1
piglit: upgrade to latest revision
webkitgtk: upgrade 2.34.1 -> 2.34.2
diffoscope: upgrade 192 -> 194
enchant2: upgrade 2.3.1 -> 2.3.2
libsoup: upgrade 3.0.2 -> 3.0.3
xxhash: upgrade 0.8.0 -> 0.8.1
kern-tools-native: check tags, not commits for new versions
libid3tag: move to meta-oe
bitbake: fetch: add a test for version check where compression changes
meson: upgrade 0.60.1 -> 0.60.2
sstatetests: add a test for moving oe-core around in the filesystem
serf: mark upstream as inactive
rust-hello-world: test at runtime
btrfs-tools: upgrade 5.15 -> 5.15.1
python3-hypothesis: upgrade 6.30.0 -> 6.31.4
elfutils: update patch submitted upstream
python3-setuptools: upgrade 59.4.0 -> 59.5.0
lighttpd: upgrade 1.4.61 -> 1.4.63
vim: do not report upstream version check as broken
harfbuzz: upgrade 3.1.2 -> 3.2.0
less: upgrade 590 -> 598
alsa: upgrade 1.2.5 -> 1.2.6
dpkg: update 1.20.9 -> 1.21.1
piglit: upgrade to latest revision
go: upgrade 1.17.4 -> 1.17.5
repo: update 2.18 -> 2.19
libptytty: add recipe
boost: update 1.77.0 -> 1.78.0
rxvt-unicode: upgrade 9.26 -> 9.30
diffoscope: upgrade 194 -> 196
debianutils: update 4.11.2 -> 5.5
libx11: update 1.7.3 -> 1.7.3.1
libsdl2: update 2.0.16 -> 2.0.18
runqemu: additional setting to force software rendering with sdl 2.0.18
cantarell-fonts: update 0.301 -> 0.303.1
go: log build id computations
lib/oe/reproducible: correctly set .git location when recursively looking for git repos
go: correctly set debug-prefix-map and build directory
go: additional patches to help reproducibility
selftest/reproducible: drop go items from exception list
virgl: skip headless test on alma 8
ruby: disable rdoc due to non-reproducibility
rust-llvm: apply the same reproducibility patch as for llvm proper
busybox: update 1.34.1 -> 1.35.0
systemd: update 249.7 -> 250.1
python3-numpy: update 1.21.4 -> 1.22.0
mdadm: update 4.1 -> 4.2
libportal: update 0.4 -> 0.5
epiphany: make libportal optional, and move it to meta-oe
librsvg: update 2.52.4 -> 2.52.5
qemuboot/runqemu: fully form the ip= kernel parameter
parselogs: add a couple systemd false positives
systemd-boot: restore reproducibility
connman-conf: do nothing in qemu, do not touch eth0
python3: drop unneeded multiprocessing module patch
ruby: update 3.0.3 -> 3.1.0
meson: fold nativesdk into the main recipe
meson: update 0.60.3 -> 0.61.1
efivar: update 37 -> 38
libuv: update 1.42.0 -> 1.43.0
resolvconf: update 1.87 -> 1.91
systemd: update 250.1 -> 250.3
python3: update 3.10.1 -> 3.10.2
logrotate: update 3.18.1 -> 3.19.0, drop rotate-across-filesystems patches
sqlite: update 3.37.1 -> 3.37.2
rust: update 1.57.0 -> 1.58.0
readline: upgrade 8.1 -> 8.1.2
socat: upgrade 1.7.4.2 -> 1.7.4.3
go: upgrade 1.17.5 -> 1.17.6
shadow: upgrade 4.10 -> 4.11.1
e2fsprogs: upgrade 1.46.4 -> 1.46.5
mtools: upgrade 4.0.36 -> 4.0.37
python3-pygments: upgrade 2.11.1 -> 2.11.2
python3-pyrsistent: upgrade 0.18.0 -> 0.18.1
python3-ruamel-yaml: upgrade 0.17.19 -> 0.17.20
vala: upgrade 0.54.4 -> 0.54.6
pigz: upgrade 2.6 -> 2.7
rpcsvc-proto: upgrade 1.4.2 -> 1.4.3
piglit: upgrade to latest revision
libinput: upgrade 1.19.2 -> 1.19.3
xwayland: upgrade 21.1.3 -> 21.1.4
puzzles: upgrade to latest revision
webkitgtk: upgrade 2.34.2 -> 2.34.3
diffoscope: upgrade 199 -> 200
libsoup: upgrade 3.0.3 -> 3.0.4
liburcu: upgrade 0.13.0 -> 0.13.1
ffmpeg: upgrade 4.4.1 -> 5.0
p11-kit: update 0.24.0 -> 0.24.1
libunistring: update 0.9.10 -> 1.0
repo: upgrade 2.19 -> 2.20
stress-ng: upgrade 0.13.09 -> 0.13.10
Alexey Brodkin (1):
openssl: Use linux-latomic target for ARC
Andreas Müller (1):
libsdl2: Move to CMake build
Andrei Gherzan (2):
gcc: Fix compile of gcc plugins
gcc: Fix typo in linux64.h install patch
Andres Beltran (2):
create-spdx: Set the Organization field via a variable
create-spdx: Fix key errors in do_create_runtime_spdx
Anton Mikanovich (1):
bitbake: process: Do not mix stderr with stdout
Anuj Mittal (3):
glibc-version.inc: remove branch= from GLIBC_GIT_URI
releases.rst: move gatesgarth to outdated releases section
xserver-xorg: update CVE_PRODUCT
Bruce Ashfield (69):
linux-yocto/5.14: update to v5.14.15
linux-yocto/5.10: update to v5.10.76
linux-yocto-rt/5.10: update to -rt54
strace: fix build against 5.15 kernel/kernel-headers
ppp: fix build against 5.15 headers
linux-libc-headers: update to v5.15
linux-yocto/5.15: introduce recipes
linux-yocto-rt/5.15: update to -rt17
linux-yocto/5.14: update to v5.14.16
linux-yocto/5.10: update to v5.10.77
linux-yocto/5.14: update to v5.14.17
linux-yocto/5.15: update to v5.15.1
linux-yocto/5.10: update to v5.10.78
kernel: provide virtual/kernel for all kernels
linux-yocto/5.15: update to v5.15.2
linux-yocto/5.14: update to v5.14.18
linux-yocto/5.10: update to v5.10.79
kernel-yocto: conditionally enable stack protection checking on x86-64
linux-yocto-dev: bump to v5.16+
kernel: export native PKGCONFIG variables
python: introduce python3-dtschema
python: import jsonpointer from meta-python
python3-jsonpointer: Update 2.1 to 2.2
python: import jsonschema from meta-python
python: import idna from meta-python
python: import rfc3339-validator from meta-python
python: import rfc3986-validator from meta-python
python: import webcolors from meta-python
python: import ruamel-yaml from meta-python
python: import pyrsistent from meta-python
python: import rfc3987 from meta-pyton
python: import strict-rfc3339 from meta-python
python: import vcversioner from meta-python
maintainers: update for kernel dtschema checking dependencies
linux-yocto: export pkgconfig variables to devshell
kernel: introduce python3-dtschema-wrapper
linux-yocto-dev: introduce dt-validation PACKAGECONFIG
linux-yocto/5.14: update to v5.14.21
linux-yocto/5.15: update to v5.15.5
linux-yocto/5.10: update to v5.10.82
linux-yocto/5.15: update to v5.15.6
linux-yocto-dev: use versioned branch as default
linux-yocto-rt/5.10: update to -rt56
kern-tools: bug fixes and kgit-gconfig
linux-yocto/5.10: update to v5.10.84
linux-yocto/5.15: update to v5.15.7
linux-yocto/5.15: update to v5.15.8
linux-yocto/5.10: update to v5.10.85
linux-yocto/5.15: update to v5.15.10
linux-yocto/5.10: update to v5.10.87
linux-yocto/5.10: update to v5.10.89
linux-yocto/5.15: update to v5.15.12
linux-yocto/5.14: fix arm 32bit -rt warnings
linux-yocto/5.15: fix arm 32bit -rt warnings
linux-yocto/5.10/cfg: add kcov feature fragment
linux-yocto/5.15/cfg: add kcov feature fragment
linux-yocto/5.15: update to v5.15.13
linux-yocto/5.10: update to v5.10.90
conf/machine: bump qemu preferred versions to 5.15
linux-yocto: drop 5.14 recipes
yocto-bsp: change default to 5.15
yocto-bsp/5.14: drop recipes
poky: set default kernel to 5.15
linux-yocto/5.15: fix arm defconfig warnings
lttng-modules: update to 2.13.1
linux-yocto/5.10: amdgpu: updates for CVE-2021-42327
linux-yocto/5.15: update to v5.15.14
linux-yocto/5.10: update to v5.10.91
linux-yocto-rt/5.15: update to -rt22
Chaitanya Vadrevu (1):
python3-pyelftools: Depend on debugger, pprint
Changhyeok Bae (2):
iputils: update 20210722 to 20211215
iproute2: update 5.15.0 to 5.16.0
Changqing Li (3):
cmake: upgrade 3.22.0 -> 3.22.1
rpm: fix CVE-2021-3521
pigz: fix one failure of command "unpigz -l"
Chen Qi (7):
bitbake: tests/fetch.py: fix premirror test cases
bitbake: tests/fetch.py: add test case to ensure downloadfilename is used for premirror
bitbake: fetch2: fix downloadfilename issue with premirror
opkg: use oe.qa.add_message istead of package_qa_add_message
avahi: update CVE id fixed by local-ping.patch
waffle: add cmake-native to DEPENDS
populate_sdk_base: remove unneeded dirs such as /dev
Claus Stovgaard (1):
cups: Fix missing installation of cups sysv init scripts
Daniel Gomez (1):
os-release: Add DISTRO_CODENAME as vardeps for do_compile
Denys Dmytriyenko (3):
wayland-protocols: upgrade 1.23 -> 1.24
wayland: upgrade 1.19.0 -> 1.20.0
mtd-utils: upgrade 2.1.3 -> 2.1.4
Dhruva Gole (2):
scripts/checklayer/common.py: Fixed a minor grammatical error
yocto-check-layer: Add additional README checks
Dmitry Baryshkov (1):
go: fix building without SECURITY_LDFLAGS
Florian Amstutz (1):
systemd: Fix systemd-journal-gateway user/groups
He Zhe (1):
linux-yocto-dev: Set KBRANCH with =
Jacob Kroon (3):
native/cross: Add ar wrapper for determinism
no-static-libs.inc: Fixes
sstate: Preserve permissions when extracting tar archive
Jagadeesh Krishnanjanappa (1):
tune-cortexa72: remove crypto for the default cortex-a72
Jasper Orschulko (4):
repo: Add recipe for 2.17.3
base.bbclass: Add sysroot deps for repo fetcher
repo: Use separate task for patching repo rev
repo: upgrade 2.17.3 -> 2.18
Jim Wilson (1):
gdb-common: Add --with-liblzma-prefix in xz PACKAGECONFIG.
Joel Winarske (1):
mesa: Add PACKAGECONFIG option for broadcom v3d Vulkan driver
Jon Mason (3):
runqemu: work without SERIAL_CONSOLES being defined
scripts/lib/wic/help.py: Update Fedora Kickstart URLs
yocto-check-layer: disregard checks if referencing another README file
Jose Quaresma (11):
sstate: another fix for touching files inside pseudo
bitbake: cooker: check if upstream hash equivalence server is available
spirv-headers: upgrade 1.5.4 -> 1.5.5
spirv-headers: bump to last master
spirv-tools: upgrade 2021.3 -> 2021.4
glslang: upgrade 11.6.0 -> 11.7.0
shaderc: upgrade 2021.2 -> 2021.3
sstate: cleanup the sstate mirror progress check
sstate: only search on the mirrors for the missing files
sstate: add a function to get the sstate file name in sstate_checkhashes
glslang: upgrade 11.7.0 -> 11.7.1
Joshua Watt (7):
classes/meson: Add optional rust definitions
classes/crate-fetch: Ensure crate fetcher is available
yocto-check-layer: Relax README case checks
webkitgtk: Add packageconfig for libsoup2
epiphany: Add packageconfig for libsoup2
selftest: reproducible: Set maximum report size
classes/native: Propagate dependencies to outhash
Justin Bronder (1):
bitbake: fetch2/wget: add redirectauth parameter
Kai Kang (7):
squashfs-tools: fix CVE-2021-41072
squashfs-tools: follow-up fix for CVE-2021-41072
convert-srcuri.py: use regex to check space in SRC_URI
packagegroup-core-tools-testapps: clear GOTOOLS for riscv32
xserver-xorg: 21.1.2 -> 21.1.3
multilib.bbclass: set rpm file color for 32-bit multilib image
speex: fix CVE-2020-23903
Kamil Dziezyk (1):
grub-efi: Add xen_boot support when 'xen' is in DISTRO_FEATURES for aarch64
Kevin Hao (6):
meta-yocto-bsp: Introduce the v5.15 bbappend
tune-cortexa72: Enable the crc extension by default for cortexa72
arch-armv8-5a.inc: Add tune include for armv8.5a
armv9a/tune: Add the support for the Neoverse N2 core
tune-cortexa72: Drop the redundant cortexa72-crc tune
tune-cortexa73: Introduce cortexa73-crypto tune
Khairul Rohaizzat Jamaluddin (1):
epiphany: update 41.0 -> 41.3
Khem Raj (37):
wpebackend-fdo: Add -Wno-c++11-narrowing
musl: Update to tip of trunk
site/common-musl: Enable qsort_r in glib
libsolv: Enable correct qsort_r on musl
kernel-devsrc: Add vdso.lds and other build files for riscv64 as well
gdb: Upgrade to 11.1
gdb: Add dependency on libgmp
librsvg: Disable 64bit atomics on riscv32/mipsel in crossbeam
qemu: Build on musl targets
qemu: Fix build on aarch64/musl
wic: Use os.rename instead of bb.utils.rename
qemu: Exclude building on riscv32
ptest-packagelists: Remove qemu ptests for rv32
gobject-introspection: Add -Dintrospection only when GIR_MESON_OPTION is not empty
gstreamer1.0-python: Improve introspection option handling
python3-pygobject: Improve introspection handling
vulkan-samples: Fix cmake errors about plain signature
vulkan-samples: Enable for architectures where it builds
glibc-tests: Do not set SYSTEMD_SERVICE
image: Include psplash only when screen machine feature is enabled
weston-init: Pass --continue-without-input when launching weston
Revert "weston-init: Pass --continue-without-input when launching weston"
boost: Fix build on arches with no atomics
glibc: Drop patch to support/workaround prelinked apps on armv5
libunwind: Enable for rv64
perf: Enable libunwind packageconfig on riscv64
glibc: Drop ppc sqrt optimisations
ffmpeg: Fix build on ppc32
mesa: Fix build on ARM systems without Neon
gdb: Drop sh4 support patch
binutils: Drop patch to wider sh regexp
mesa: Fix broadcom vulkan driver build on 32bit arches with 64bit time_t
mesa: Define broadcom packageconfig knob
glibc: Redo tzselect bash dependency problem
gcc: Update status of musl stddef.h patch
libsdl2: Fix build when libunwind is not used
valgrind: Avoid accessing network in ptest task
Konrad Weihmann (3):
insane: add Inactive-Upstream to Upstream-Status
insane: move src-uri-bad checks to unpack stage
cve-check: add lockfile to task
Leif Middelschulte (1):
meson: improve SDK's wrapper to make Wraps work
Li Wang (1):
libtool: change the default AR_FLAGS from "cru" to "cr"
Lukasz Majewski (1):
glibc: ptest: Add running glibc time related test suite (Y2038) with ptest
Manuel Leonhardt (2):
sstate: Account for reserved characters when shortening sstate filenames
dpkg: Install dkpg-perl scripts to versioned perl directory
Marek Vasut (2):
bootchart2: Add missing python3-math dependency
u-boot: upgrade 2021.10 -> 2022.01
Markus Volk (2):
libva: move PACKAGECONFIG options to libva.inc
vulkan-loader: inherit pkgconfig
Martin Jansa (1):
gdb-cross: add dependency on gmp-native
Matt Madison (2):
qemu.bbclass: drop OLDEST_KERNEL reference
qemu: add patch to set minimum kernel version for riscv32
Matthias Klein (1):
gdb: fix aarch64 remote debugging gdb/28355
Max Krummenacher (4):
perf: sort-pmuevents: don't drop elements
perf: sort-pmuevents: allow for additional type qualifiers and storage class
ref-manual: fix patch documentation
libsdl2: fix build if egl.pc sets macros in cflags
Michael Halstead (3):
releases: update to include 3.3.4
releases: update to include 3.4.1
releases: update to include 3.1.13
Michael Opdenacker (35):
manuals: correct "take affect" by "take effect"
manuals: start of documentation standards document
bitbake: doc: bitbake-user-manual: expand SRC_URI description
ref-manual: remove reference to TOPDIR
ref-manual: BBFILES_DYNAMIC - fix punctuation and quoting issues
ref-manual: simplify SRC_URI reference
documentation: prepare for 3.1.12 release
bitbake: bitbake-user-manual: quoting fixes
bitbake: bitbake-user-manual: fix typo
bitbake: bitbake-user-manual: add missing reference
bitbake: bitbake-user-manual: fix backslash issues
bitbake: bitbake-user-manual: SRC_URI: mention gitsm fetcher
ref-manual: drop support for Ubuntu 16.04
ref-manual: drop support for Fedora 30-32
dev-manual: remove warning about += and :append
manuals: add hyperlinks to files in meta-skeleton
dev-manual: how to purge duplicate sstate cache files
migration-guides: add more class references
ref-manual: add more class references
misc manuals: add further class references
ref-manual: remove newline string in PREMIRRORS
bitbake: doc: bitbake-user-manual: expand BB_HASHSERVE and document BB_HASHSERVE_UPSTREAM
documentation: add comment to releases.rst switchers.js
overview-manual: fix typo
manuals: replace "rootfs" by "root filesystem"
quick start manual: update Share State and Hash Equivalence settings
documentation/README: trivial typo fix
manuals: document hash equivalence
dev-manual: update bitbake.conf sample for static libs
manuals: add reference to GIR_EXTRA_LIBS_PATH plus minor improvements
migration-guides: prepare for release 3.5
manuals: simplify references to class sections
ref-manual: Drop TUNEABI, TUNEABI_WHITELIST, TUNEABI_OVERRIDE
dev-manual: stop mentioning nightly builds
bitbake: doc: bitbake-user-manual: expand BB_HASHSERVE explanations
Mike Crowe (3):
kernel: improve transformation from KERNEL_IMAGETYPE_FOR_MAKE
package: Only snap libraries if they would be processed by ldconfig OS-12840
documentation: Document PACKAGE_SNAP_LIB_SYMLINKS
Mingli Yu (4):
wic: use shutil.which
libpam: Backport ptest fix checking whether files exist
libhandy: Backport a makefile header race
bootchart2: remove wait_boot logic
Oleksandr Kravchuk (5):
libxcvt: add recipe
python3: udpate to 3.10.1
libx11: update to 1.7.3
xserver-xorg: update to 21.1.2
ofono: update to 1.34
Oleksiy Obitotskyy (1):
package_manager: ipk: Fix host manifest generation
Otavio Salvador (20):
acpica: upgrade 20210930 -> 20211217
asciidoc: upgrade 10.0.2 -> 10.1.1
alsa-ucm-conf: upgrade 1.2.6.2 -> 1.2.6.3
bind: upgrade 9.16.23 -> 9.16.24
kea: upgrade 2.0.0 -> 2.0.1
meson: upgrade 0.60.2 -> 0.60.3
mmc-utils: upgrade to latest revision
python3-attrs: upgrade 21.2.0 -> 21.4.0
python3-cython: upgrade 0.29.25 -> 0.29.26
python3-hypothesis: upgrade 6.31.4 -> 6.34.1
python3-importlib-metadata: upgrade 4.9.0 -> 4.10.0
python3-pygments: upgrade 2.10.0 -> 2.11.1
python3-ruamel-yaml: upgrade 0.17.17 -> 0.17.19
python3-tomli: upgrade 1.2.2 -> 2.0.0
python3-zipp: upgrade 3.6.0 -> 3.7.0
sqlite3: upgrade 3.37.0 -> 3.37.1
stress-ng: upgrade 0.13.08 -> 0.13.09
python3-dtschema: upgrade 2021.10 -> 2021.12
mesa: 21.3.1 -> 21.3.3
libxcrypt, libxcrypt-compat: upgrade 4.4.26 -> 4.4.27
Paul Eggleton (4):
classes/kernel*: allow disabling symlink creation
classes/qemuboot: allow IMAGE_LINK_NAME to be empty
classes/kernel*: add variables to allow changing artifact extension
classes/create-spdx: handle if IMAGE_LINK_NAME is empty
Pavel Zhukov (2):
go: upgrade 1.16.8 -> 1.16.10
patch.py: Initialize git repo before patching
Peter Kjellerstedt (22):
systemd: Do not install anything in /var/volatile
base-files: Ignore the empty-dirs QA error due to files in /var/volatile
apt: Do not install /var/log/apt for target
insane.bbclass: Add a check for directories that are expected to be empty
libx11: Update LICENSE to better reflect reality
libx11-compose-data: Update LICENSE to better reflect reality
ncurses.inc: Remove a no longer relevant comment
systemd: Revert inappropriate use of ${systemd_system_unitdir}
systemd-conf: Revert inappropriate use of ${systemd_system_unitdir}
systemd-bootchart: Revert inappropriate use of ${systemd_system_unitdir}
mirrors.bbclass: Clean up the additions to MIRRORS
own-mirrors.bbclass: Clean up the additions to PREMIRRORS
gcc-common.inc: Clean up the additions to MIRRORS
slang: Clean up the additions to PREMIRRORS
testsdk.py: Clean up the additions to PREMIRRORS and SSTATE_MIRRORS
gcc-common.inc: Remove mirrors that are no longer available
tzdata: Make it compatible with devtool modify
tzdata: Remove unnecessary RPROVIDES
tzdata: Clean up
tzdata: Remove no longer relevant RCONFLICTS:${PN}
rootfs-postcommands.bbclass: Make two comments use the new variable syntax
systemd: Avoid a Python deprecation warning
Pgowda (2):
gcc: Fix CVE-2021-35465
rust-cross: Replace TARGET_ARCH with TUNE_PKGARCH
Quentin Schulz (10):
README.OE-Core.md: update URLs
ptest-packagelists: Add missing python3-webcolors entry
make the documentation a bit more inclusive
docs: dev-manual: common-tasks: highlight creating your own layer is not required
documentation: conf.py: add knob for loading appropriate objects.inv
kmscube: fix build on OpenGL ES 3 dependencies not providing GLES3/gl3ext.h
mesa: PROVIDES virtual/libgles3
kmscube: add build dependency on virtual/libgles3
mesa: make ligles3-dev RDEPENDS on libgles2-dev
bitbake: doc: bitbake-user-manual: specify the URL to be used with SSH over git is different from `git clone`'s
Randy MacLeod (5):
valgrind: Add util-linux-taskset ptest dependency
valgrind: backport rseq work-around
valgrind: remove duplicate and skipped tests from remove-for-aarch64
valgrind: skip boost_thread for aarch64 ptests
valgrind: make run-ptest better
Richard Purdie (133):
meta: Add explict branch to git SRC_URIs
meta/scripts: Manual git url branch additions
linunistring: Add missing gperf-native dependency
archiver: Default to xz compresison instead of gz
gcc: Drop libgfortran patch
pseudo: Add fcntl64 wrapper
libgfortran: Set GFORTRAN
bitbake: fetch2/git: Allow git fetcher to support subdir param
bitbake: fetch2/git: Add a warning asking users to set a branch in git urls
bitbake: tests/fetch: Update github urls
bitbake: fetch/git: Handle github dropping git:// support
bitbake: fetch/git: Show warning for invalid github urls
bitbake: lib/bb: Clean up use of len()
bitbake: daemonize: Avoid unclosed file warning
bitbake: lib/bb: Fix string concatination potential performance issues
bitbake: fetch: Handle mirror user/password replacements correctly
bitbake: tests/fetch: Add test for url parameter rewriting
bitbake.conf: Fix corruption of GNOME mirror url
scripts/convert-srcuri: Update SRC_URI conversion script to handle github url changes
recipes: Update github.com urls to use https
go-helloworld/glide: Fix urls
opkg: Fix poor operator combination choice
bitbake: runqueue: Fix runall option task deletion ordering issue
bitbake: tests/fetch: Update pcre.org address after github changes
bitbake: cooker: Handle parse threads disappearing to avoid hangs
bitbake: fetch2/checksum/siggen: Fix taskhashes not tracking file directories
bitbake: runqueue: Fix runall option handling
bitbake: cooker: Remove debug code, oops :(
bitbake: parse/ast: Show warnings for append/prepend/remove operators combined with +=/.=
bitbake: fetch/wget: Add timeout for checkstatus calls (30s)
bitbake: cooker: Handle parsing results queue race
mirrors: Add uninative mirror on kernel.org
scripts/oe-package-browser: Fix after overrides change
scripts/oe-package-browser: Handle no packages being built
xserver-xorg: Remove orphaned comment
bitbake: fetch: Add README on fetcher design constraints
wpa-supplicant: Match package override to PACKAGES for pkg_postinst
uninative: Add version to uninative tarball name
packagegroup-core-buildessential: Mark as TUNE_PKGARCH specific
packagegroups-core-full-cmdline: Drop libraries packagegroup and gmp
packagegroup-core-full-cmdline: Drop compatibility mappings
packagegroup-core-x11-base: Drop dbus dependency
mirrors: Add kernel.org sources mirror for downloads.yoctoproject.org
bitbake: cooker: Fix task-depends.dot for multiconfig targets
bitbake: tests/runqueue: Set TOPDIR in test
bitbake: cookerdata: Set TOPDIR explicitly and fix broken findTopdir()
bitbake: cache/ConfHandler: Drop TOPDIR/chdir manipulations
package: Add sanity check for allarch packagegroups
gcc: Dropping mips workaround
lua: Backport fix for CVE-2021-43396
glibc: Backport fix for CVE-2021-43396
gcc: Tweak Upstream-Status formatting
bitbake: utils: Handle lockfile filenames that are too long for filesystems
bitbake: fetch2: Fix url remap issue and add testcase
bitbake: bitbake-user-manual: Remove newline string in MIRRORS/PREMIRRORS
buildhistory: Drop support for older bitbakes
buildhistory: Fix srcrevs output
ptest-packagelists: Handle glibc vs musl for ptest
buildhistory: Fix do_package race issues
bitbake.conf: Pass -D option to ranlib for determisim
glibc: Fix i586/c3 support
gcc: Drop no longer needed patch
ptest-packagelists: Add missing python3-jsonpointer entry
python3: Add missing HOMEPAGE entries
nativesdk: Handle chown/chgrp calls in nativesdk do_install tasks
gcc: Drop mips default ABI patch
gcc: Drop further unneeded precompiled header patch
oeqa/utils/dump: Fix typo
oeqa/parselogs: Fix quoting
sanity/lib: Replace usage of LooseVersion() with bb.utils.vercmp_string_op()
patchelf: Upgrade 0.14.1 -> 0.14.2
debian: Fix renaming packagedata dependencies
gst-plugins-bad: Add missing libxkbcommon vulkan dependency
gcc: Update patch status submitted->backport
minicom: Mark patches as backports
minicom: Upgrade 2.7.1 -> 2.8
glibc: Drop patch for obsolete conflict issue
gst-plugins-bad: Bump cache versions to avoid libxkbcommon sstate issues
puzzles: Refresh patches based upon upstream discussion
gcc: Add CVE-2021-37322 to the list of CVEs to ignore
bitbake: siggen: Ensure dumpsig output is deterministic
build-appliance-image: Update to master head revision
binutils: Drop mips gold patch
binutils: Add more detail to the ppc patch
binutils: Drop mips default target patch
perf: Tweak for mips n64
binutils: Drop mips XLP support patch
puzzles: Upgrade to latest git with patches merged
lttng-ust: upgrade 2.13.0 -> 2.13.1
patchelf: upgrade 0.14.2 -> 0.14.3
lttng-tools: Backport ptest fix
lttng-tools: Disable problem tests
bitbake: tests/runqueue: Improve lockfile handling race
python3-idna: Update license to Unicode-TOU
bitbake: tests/fetch: Drop gnu urls from wget connectivity test
manpages: Fix override/append ordering and hence task signatures
qemu: Upgrade 6.1.0 -> 6.2.0
lttng-tools: Upgrade 2.13.1 -> 2.13.2
oeqa/selftest/bbtests: Use YP sources mirror instead of GNU
qemu: Add selinux PACKAGECONFIG
package_deb/ipk/rpm: Add more minimal do_build dependencies back
meson: Handle qemu riscv issues
openssl: Add reproducibility fix
webkitgtk: Add reproducibility fix
scripts: Update to use exec_module() instead of load_module()
bitbake: utils: Update to use exec_module() instead of load_module()
gtk-doc/meson: Fix typos
libsdl2: Fix X11 configure options
Revert "qemu.bbclass: drop OLDEST_KERNEL reference"
allarch: Fix interaction with qemu class
expat: Update HOMEPAGE to current url
wayland-protocols: Change inherit order
sstatetests: Add OLDEST_KERNEL to allarch tests
oeqa/sstate: Fix allarch samesigs test
buildtools-installer: Update to use 3.4
bitbake: utils: Add disable_network function
bitbake: bitbake-worker: Add/support network task flag
bitbake: runqueue: Drop BB_STAMP_POLICY/BB_STAMP_WHITELIST
classes: Only allow network in existing network accessing code
sanity: Drop TUNEABI, TUNEABI_WHITELIST, TUNEABI_OVERRIDE
expat: Upgrade 2.4.2 -> 2.4.3
expat: Drop unneeded libtool patch, we use cmake
bitbake: doc: Drop BB_STAMP_POLICY/BB_STAMP_WHITELIST
expat: Simplify ptest-runner
build-appliance-image: Update to master head revision
bitbake: build: Tweak exception handling for setscene tasks
bitbake: fetch2: Add crate fetcher
sstate: Show better exception information for failures
sstate: Improve failure to obtain archive message/handling
abi_version: Bump HASHEQUIV_HASH_VERSION
crate-fetch: Switch to version contained in bitbake
build-appliance-image: Update to master head revision
build-appliance-image: Update to master head revision
Robert Joslyn (4):
ref-manual: Fix module_conf typo
curl: Update to 7.81.0
curl: Rework openssl and random PACKAGECONFIGs
maintainers.inc: Add myself as maintainer for curl
Robert P. J. Day (1):
ref-manual: generalize definition of "container layer"
Robert Yang (3):
sanity.bbclass: Update required gcc version to v7.5
bitbake: lib/pyinotify.py: Remove deprecated module asyncore
bitbake: data_smart.py: Skip old override syntax checking for anonymous functions
Ross Burton (61):
openssl: fix builds on ARMv8 targets without Aarch64
python3: silence DeprecationWarnings in python3-config
meson: set objcopy in the cross and native toolchain files
ref-manual: improve documentation for SDKMACHINE
kickstart: update busybox note regarding PARTUUID
scons: support out-of-tree builds
vim: fix CVE-2021-3796, CVE-2021-3872, and CVE-2021-3875
vim: add patch number to CVE-2021-3778 patch
meta: use ln -rs instead of lnr
insane: remove unrecognised option check for Meson
dtc: merge .bb/.inc
dtc: use Meson to build
dtc: add PACKAGECONFIGs for tools and yaml
dtc: fix mingw build
ncurses: poll() works, but only on Linux
vim: fix CVE-2021-3927 and CVE-2021-3928
scripts/lnr: remove
gmp: fix CVE-2021-43618
oe/utils: allow naming threads in ThreadedPool
sstate: explicitly name the checkhashes thread pool
oe/utils: by default cap cpu_count() to 64 cores
vim: fix CVE-2021-3968 and CVE-2021-3973
vim: set PACKAGECONFIG idiomatically
openssl: fix EVP_PKEY_CTX_get_rsa_pss_saltlen() not returning a value
recipetool: handle GitLab URLs like we do GitHub
recipetool: extend curl detection when creating recipes
glew: update patch status
libx11: update patch status
libxkbcommon: remove obsolete util-macros dependency
libxkbcommon: allow building of API documentation
xkbcommon: split xkbcli into a separate package
libxkbcommon: split libraries into separate packages
xkbcommon: add option for xkbregistry
tcf-agent: cleanup patches
vim: upgrade to 8.2 patch 3752
runqemu: check the qemu PID has been set before kill()ing it
gstreamer1.0-plugins-bad: clean up X11 dependencies
libtool: don't prefix the installed binary
binutils: don't expect libtool to be host-prefixed
pkgconfig: remove obsolete support for renamed libtool
gtk+3: remove obsolete support for renamed libtool
db: remove obsolete support for renamed libtool
freetype: remove obsolete support for renamed libtool
apr: remove obsolete support for renamed libtool
qemu: remove obsolete support for renamed libtool
subversion: remove obsolete support for renamed libtool
apmd: remove obsolete support for renamed libtool
libical: upgrade to 3.0.12
python3: backport a fix so the test suite passes with OpenSSL 3.0.1
openssl: upgrade to 3.0.1
kmod: remove obsolete ac_pwd manipulation
kmod: merge target/native recipes
kmod: expand compression PACKAGECONFIGs
gawk: remove load-sensitive tests
linux-yocto: add libmpc-native to DEPENDS
xserver-xorg: whitelist two CVEs
systemtap: fix vsprintf errors
oeqa/runtime/stap: rewrite test
vim: update to include latest CVE fixes
lighttpd: backport a fix for CVE-2022-22707
oeqa/runtime/stap: increase buffer size
S. Lockwood-Childs (1):
cups: fix typo in flags to disable avahi
Samuli Piippo (1):
rpm: remove tmp folder created during install
Saul Wold (7):
create_spdx: ensure is_work_shared() is unique
create-spdx: Protect against None from LICENSE_PATH
kernel: add -dbg package
perl: Enable threading
kernel.bbclass: use common strip()
package: Add support for kernel stripping
create-spdx: Add kernel work-shared source
Schmidt, Adriaan (1):
wic: support rootdev identified by partition label
Stefan Herbrechtsmeier (17):
bitbake: fetch2: npmsw: Add support for duplicate dependencies without url
bitbake: fetch2: npmsw: Add support for github prefix in npm shrinkwrap version
bitbake: fetch2: Unify tar command in unpack
bitbake: fetch2: Add striplevel support to unpack
bitbake: bitbake-user-manual: Add striplevel unpack parameter
bitbake: test/fetch: Add striplevel unpack parameter test
recipetool: Set master branch only as fallback
selftest/devtool: Check branch in git fetch
selftest/recipetool: Split tests into separate test classes
selftest: devtool: Separate common functions and devtool sstate setup into two classes
selftest/recipetool: Add tests for branch parameter and srcbranch option
bitbake: fetch: npm: Quote destdir in run chmod command
bitbake: fetch: npm: Use temporary file for empty user config
recipetool: Sort output of guess_license function to be deterministic
recipetool: Separate licenses with & operator
selftest: recipetool: Add test for split_pkg_licenses function
selftest: recipetool: Add test for handle_license_vars function
Steve Sakoman (4):
ref-system-requirements.rst: Add Debian 11 to list of supported distros
ref-system-requirements.rst: Add Fedora 33 and 34 to list of supported distros
ref-system-requirements.rst: Add openSUSE Leap 15.2 to list of supported distros
cve-extra-exclusions: add db CVEs to exclusion list
Sundeep KOKKONDA (2):
glibc : Fix CVE-2022-23218
glibc : Fix CVE-2022-23219
Teoh Jay Shen (2):
linux-yocto/5.10: update genericx86* machines to v5.10.87
linux-yocto/5.14: update genericx86* machines to v5.14.21
Thomas Perrot (1):
uboot-sign: fix the concatenation when multiple U-BOOT configurations are specified
Tim Orling (29):
scripts/buildhistory-diff: drop use of distutils
maintainers.inc: update email address
poky.yaml: centos-7 python36-pip -> python3-pip
classes/distutils-*: add warning of deprecation
setuptools3: refactor for no distutils bbclasses
dnf: inherit setuptools3-base instead of distutils
libdnf: inherit setuptools3-base not distutils
python3-cython: DISTUTILS_* -> SETUPTOOLS_*
python3-dbus: inherit setuptools3-base not distuils
gpgme: inherit setuptools-base not distuils
python3-pip: inherit setuptools3 not distuils3
systemtap: use setuptools-base not distutils
libcomps: inherit setuptools3-base not distutils
createrepo-c: inherit setuptools3-base not distutils
librepo: inherit setuptools3-base not distutils
btrfs-tools: use setuptools3-base not distutils
bind: inherit setuptools3-base instead of distutils
python3-pygobject: setuptools instead of distuils
python3-setuptools: do not depend on distutils
gstreamer1.0-python: inherit setuptools3-base
recipetool/create_buildsys_python.py: less distutils
waf.bbclass: drop usage of distutils
dnf: drop python3-distutils dependency
python3native.bbclass: distutils -> sysconfig
rootfs_rpm.bbclass: distutils -> sysconfig module
python3-hypothesis: upgrade 6.34.1 -> 6.35.0
ref-manual/variables.rst: add SETUPTOOLS_SETUP_PATH
ref-manual/variables.rst: add SETUPTOOLS_*_ARGS
ref-manual/classes.rst: add setuptools3-base
Tom Hochstein (3):
wayland: Fix wayland-tools packaging
nativesdk-packagegroup-sdk-host.bb: Update host tools for wayland
bitbake.conf: Use wayland distro feature for native builds
Ulrich Ölmann (1):
gstreamer1.0-plugins-base: add support for graphene
Valerii Chernous (1):
elf: Discard input .note.gnu.build-id sections
Vivien Didelot (2):
beaglebone-yocto: prefer u-boot
beaglebone-yocto: move kernel and dtb to packagegroup-core-boot
Vyacheslav Yurkov (17):
overlayfs: all overlays unit
oeqa/selftest: refactor common functions
overlayfs: meta-selftest recipe fix
oeqa/selftest: extend overlayfs test
overlayfs: add debug information
ref-manual: update overlayfs class
rootfs-postcommands: update systemd_create_users
files: add overlayfs-etc-preinit.sh.in
wic: image for overlayfs-etc tests
overlayfs-etc: mount etc as overlayfs
image: add overlayfs-etc image feature
oeqa/selftest: overlayfs helper function
oeqa/selftest: unit tests for overlayfs-etc
overlayfs: update notes on /etc
overlayfs: move templates to files directory
ref-manual: add overlayfs-etc class
ref-manual: document overlayfs-etc image feature
Yi Zhao (6):
bind: remove -r option from rndc-confgen in initscript
rpcbind: install rpcbind.conf
python3-numpy: move recipe to python directory
python3-numpy: add python3-json to RDEPENDS
oeqa: fix warnings for append operators combined with +=
meta-skeleton: fix warnings for append operators combined with +=
Yongxin Liu (1):
grub2: fix CVE-2021-3981
Zev Weiss (1):
u-boot: Split do_configure logic into separate file
pgowda (2):
gcc: Fix CVE-2021-42574
binutils: CVE-2021-42574
wangmy (67):
bind: upgrade 9.16.21 -> 9.16.22
glib-2.0: upgrade 2.70.0 -> 2.70.1
python3-dbusmock: upgrade 0.24.0 -> 0.24.1
python3-docutils: upgrade 0.17.1 -> 0.18
btrfs-tools: upgrade 5.14.2 -> 5.15
diffoscope: upgrade 189 -> 190
ell: upgrade 0.44 -> 0.45
harfbuzz: upgrade 3.0.0 -> 3.1.1
iproute2: upgrade 5.14.0 -> 5.15.0
iso-codes: upgrade 4.7.0 -> 4.8.0
iw: upgrade 5.9 -> 5.16
libpcre2: upgrade 10.37 -> 10.39
msmtp: upgrade 1.8.18 -> 1.8.19
libevdev: upgrade 1.11.0 -> 1.12.0
libdrm: upgrade 2.4.107 -> 2.4.108
libhandy: upgrade 1.4.0 -> 1.5.0
python3-importlib-metadata: upgrade 4.8.1 -> 4.8.2
python3-jinja2: upgrade 3.0.2 -> 3.0.3
python3-more-itertools: upgrade 8.10.0 -> 8.11.0
libtasn1: upgrade 4.17.0 -> 4.18.0
ethtool: upgrade 5.14 -> 5.15
stress-ng: upgrade 0.13.06 -> 0.13.07
systemtap: upgrade 4.5 -> 4.6
python3-scons: upgrade 4.2.0 -> 4.3.0
libcap: upgrade 2.60 -> 2.61
mesa: upgrade 21.2.5 -> 21.3.0
python3-mako: upgrade 1.1.5 -> 1.1.6
libjpeg-turbo: upgrade 2.1.1 -> 2.1.2
libdrm: upgrade 2.4.108 -> 2.4.109
libsoup-2.4: upgrade 2.74.1 -> 2.74.2
libunwind: upgrade 1.5.0 -> 1.6.0
libexif: upgrade 0.6.23 -> 0.6.24
mtools: upgrade 4.0.35 -> 4.0.36
patchelf: upgrade 0.13 -> 0.14.1
sqlite3: upgrade 3.36.0 -> 3.37.0
sysklogd: upgrade 2.2.3 -> 2.3.0
ovmf: upgrade 202108 -> 202111
python3-docutils: upgrade 0.18 -> 0.18.1
python3-libarchive-c: upgrade 3.1 -> 3.2
sysstat: upgrade 12.4.3 -> 12.4.4
vala: upgrade 0.54.3 -> 0.54.4
xauth: upgrade 1.1 -> 1.1.1
mpg123: upgrade 1.29.2 -> 1.29.3
python3-cython: upgrade 0.29.24 -> 0.29.25
libcap: upgrade 2.61 -> 2.62
linux-firmware: upgrade 20211027 -> 20211216
python3-importlib-metadata: upgrade 4.8.2 -> 4.9.0
sysvinit: upgrade 3.00 -> 3.01
python3-dbusmock: upgrade 0.24.1 -> 0.25.0
python3-numpy: upgrade 1.21.4 -> 1.21.5
expat: upgrade 2.4.1 -> 2.4.2
gnupg: upgrade 2.3.3 -> 2.3.4
ell: upgrade 0.46 -> 0.47
bash: upgrade 5.1.8 -> 5.1.16
createrepo-c: upgrade 0.17.7 -> 0.18.0
bluez5: upgrade 5.62 -> 5.63
iso-codes: upgrade 4.8.0 -> 4.9.0
less: upgrade 598 -> 600
libpipeline: upgrade 1.5.4 -> 1.5.5
diffoscope: upgrade 196 -> 199
libsdl2: upgrade 2.0.18 -> 2.0.20
hdparm: upgrade 9.62 -> 9.63
mesa: upgrade 21.3.3 -> 21.3.4
python3-git: upgrade 3.1.24 -> 3.1.26
python3-numpy: upgrade 1.22.0 -> 1.22.1
strace: upgrade 5.15 -> 5.16
btrfs-tools: upgrade 5.15.1 -> 5.16
zhengruoqin (9):
opkg-utils: upgrade 0.4.5 -> 0.5.0
opkg: upgrade 0.4.5 -> 0.5.0
glib-networking: upgrade 2.70.0 -> 2.70.1
stress-ng: upgrade 0.13.07 -> 0.13.08
vte: upgrade 0.66.0 -> 0.66.2
rt-tests: upgrade 2.2 -> 2.3
shadow: upgrade 4.9 -> 4.10
libmicrohttpd: upgrade 0.9.73 -> 0.9.75
gtk+3: upgrade 3.24.30 -> 3.24.31
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I11c88e9f9999d629de5a0ecdb44ccc1003b02376
diff --git a/poky/documentation/README b/poky/documentation/README
index 2d9eb88..10b46de 100644
--- a/poky/documentation/README
+++ b/poky/documentation/README
@@ -56,9 +56,16 @@
This file defines variables used for documentation production. The variables
are used to define release pathnames, URLs for the published manuals, etc.
-template
-========
-Contains various templates, fonts, and some old PNG files.
+standards.md
+============
+
+This file specifies some rules to follow when contributing to the documentation.
+
+template/
+=========
+
+Contains a template.svg, to make it easier to create consistent
+SVG diagrams.
Sphinx
======
@@ -331,7 +338,7 @@
- With a specific description instead of the section name:
:ref:`Azure Storage fetcher (az://) <bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers>`
- With the section name:
- ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-intro:usage and syntax` option
+ :ref:`bitbake:bitbake-user-manual/bitbake-user-manual-intro:usage and syntax` option
- Linking to the entire BitBake manual:
:doc:`BitBake User Manual <bitbake:index>`
diff --git a/poky/documentation/brief-yoctoprojectqs/index.rst b/poky/documentation/brief-yoctoprojectqs/index.rst
index c041953..eaacde2 100644
--- a/poky/documentation/brief-yoctoprojectqs/index.rst
+++ b/poky/documentation/brief-yoctoprojectqs/index.rst
@@ -244,19 +244,24 @@
.. tip::
You can significantly speed up your build and guard against fetcher
- failures by using mirrors. To use mirrors, add these lines to your
- local.conf file in the Build directory::
+ failures by using :ref:`overview-manual/concepts:shared state cache`
+ mirrors and enabling :ref:`overview-manual/concepts:hash equivalence`.
+ This way, you can use pre-built artifacts rather than building them.
+ This is relevant only when your network and the server that you use
+ can download these artifacts faster than you would be able to build them.
- SSTATE_MIRRORS = "\
- file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH \n \
- file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION_MINUS_ONE;/PATH;downloadfilename=PATH \n \
- file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION;/PATH;downloadfilename=PATH \n \
- "
+ To use such mirrors, uncomment the below lines in your ``local.conf``
+ file in the :term:`Build Directory`::
+ BB_SIGNATURE_HANDLER = "OEEquivHash"
+ BB_HASHSERVE = "auto"
+ BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687"
+ SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION;/PATH;downloadfilename=PATH"
- The previous examples showed how to add sstate paths for Yocto Project
- &YOCTO_DOC_VERSION_MINUS_ONE;, &YOCTO_DOC_VERSION;, and a development
- area. For a complete index of sstate locations, see :yocto_sstate:`/`.
+ The above settings assumed the use of Yocto Project &YOCTO_DOC_VERSION;.
+ If you are using the development version instead, set :term:`SSTATE_MIRRORS` as follows::
+
+ SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH"
#. **Start the Build:** Continue with the following command to build an OS
image for the target, which is ``core-image-sato`` in this example:
diff --git a/poky/documentation/bsp-guide/bsp.rst b/poky/documentation/bsp-guide/bsp.rst
index 65652ff..f8d38ca 100644
--- a/poky/documentation/bsp-guide/bsp.rst
+++ b/poky/documentation/bsp-guide/bsp.rst
@@ -1121,12 +1121,12 @@
how to use these variables.
If you build as you normally would, without specifying any recipes in
- the :term:`LICENSE_FLAGS_WHITELIST`, the build stops and provides you
- with the list of recipes that you have tried to include in the image
- that need entries in the :term:`LICENSE_FLAGS_WHITELIST`. Once you enter
- the appropriate license flags into the whitelist, restart the build
- to continue where it left off. During the build, the prompt will not
- appear again since you have satisfied the requirement.
+ the :term:`LICENSE_FLAGS_WHITELIST` variable, the build stops and provides
+ you with the list of recipes that you have tried to include in the image
+ that need entries in the :term:`LICENSE_FLAGS_WHITELIST` variable. Once you
+ enter the appropriate license flags into it, restart the build to continue
+ where it left off. During the build, the prompt will not appear again since
+ you have satisfied the requirement.
Once the appropriate license flags are on the white list in the
:term:`LICENSE_FLAGS_WHITELIST` variable, you can build the encumbered
diff --git a/poky/documentation/conf.py b/poky/documentation/conf.py
index 8e08479..1bea180 100644
--- a/poky/documentation/conf.py
+++ b/poky/documentation/conf.py
@@ -17,6 +17,7 @@
import datetime
current_version = "dev"
+bitbake_version = "" # Leave empty for development branch
# String used in sidebar
version = 'Version: ' + current_version
@@ -90,7 +91,7 @@
# Intersphinx config to use cross reference with Bitbake user manual
intersphinx_mapping = {
- 'bitbake': ('https://docs.yoctoproject.org/bitbake/', None)
+ 'bitbake': ('https://docs.yoctoproject.org/bitbake/' + bitbake_version, None)
}
# Suppress "WARNING: unknown mimetype for ..."
diff --git a/poky/documentation/dev-manual/common-tasks.rst b/poky/documentation/dev-manual/common-tasks.rst
index 3eead14..ed6b144 100644
--- a/poky/documentation/dev-manual/common-tasks.rst
+++ b/poky/documentation/dev-manual/common-tasks.rst
@@ -24,15 +24,17 @@
Creating Your Own Layer
-----------------------
-It is very easy to create your own layers to use with the OpenEmbedded
-build system, as the Yocto Project ships with tools that speed up creating
-layers. This section describes the steps you perform by hand to create
-layers so that you can better understand them. For information about the
-layer-creation tools, see the
-":ref:`bsp-guide/bsp:creating a new bsp layer using the \`\`bitbake-layers\`\` script`"
-section in the Yocto Project Board Support Package (BSP) Developer's
-Guide and the ":ref:`dev-manual/common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script`"
-section further down in this manual.
+.. note::
+
+ It is very easy to create your own layers to use with the OpenEmbedded
+ build system, as the Yocto Project ships with tools that speed up creating
+ layers. This section describes the steps you perform by hand to create
+ layers so that you can better understand them. For information about the
+ layer-creation tools, see the
+ ":ref:`bsp-guide/bsp:creating a new bsp layer using the \`\`bitbake-layers\`\` script`"
+ section in the Yocto Project Board Support Package (BSP) Developer's
+ Guide and the ":ref:`dev-manual/common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script`"
+ section further down in this manual.
Follow these general steps to create your layer without using tools:
@@ -234,11 +236,6 @@
KERNEL_FEATURES:append:qemuall=" features/debug/printk.scc"
- .. note::
-
- Avoiding "+=" and "=+" and using machine-specific ``:append``
- and ``:prepend`` operations is recommended as well.
-
- *Place Machine-Specific Files in Machine-Specific Locations:* When
you have a base recipe, such as ``base-files.bb``, that contains a
:term:`SRC_URI` statement to a
@@ -943,7 +940,8 @@
:term:`Build Directory`.
To understand how these features work, the best reference is
-``meta/classes/image.bbclass``. This class lists out the available
+:ref:`meta/classes/image.bbclass <ref-classes-image>`.
+This class lists out the available
:term:`IMAGE_FEATURES` of which most map to package groups while some, such
as ``debug-tweaks`` and ``read-only-rootfs``, resolve as general
configuration settings.
@@ -2118,7 +2116,7 @@
PROVIDES += "${@ "virtual/kernel" if (d.getVar("KERNEL_PACKAGE_NAME") == "kernel") else "" }"
-Any recipe that inherits the ``kernel`` class is
+Any recipe that inherits the :ref:`kernel <ref-classes-kernel>` class is
going to utilize a :term:`PROVIDES` statement that identifies that recipe as
being able to provide the ``virtual/kernel`` item.
@@ -2245,12 +2243,13 @@
If you have recipes that use ``pkg_postinst`` function and they require
the use of non-standard native tools that have dependencies during
-rootfs construction, you need to use the
+root filesystem construction, you need to use the
:term:`PACKAGE_WRITE_DEPS`
variable in your recipe to list these tools. If you do not use this
variable, the tools might be missing and execution of the
post-installation script is deferred until first boot. Deferring the
-script to first boot is undesirable and for read-only rootfs impossible.
+script to the first boot is undesirable and impossible for read-only
+root filesystems.
.. note::
@@ -2464,7 +2463,7 @@
The easiest solution is to create a recipe that uses the
:ref:`bin_package <ref-classes-bin-package>` class
and to be sure that you are using default locations for build artifacts.
-In most cases, the ``bin_package`` class handles "skipping" the
+In most cases, the :ref:`bin_package <ref-classes-bin-package>` class handles "skipping" the
configure and compile steps as well as sets things up to grab packages
from the appropriate area. In particular, this class sets ``noexec`` on
both the :ref:`ref-tasks-configure`
@@ -2472,7 +2471,7 @@
sets ``FILES:${PN}`` to "/" so that it picks up all files, and sets up a
:ref:`ref-tasks-install` task, which
effectively copies all files from ``${S}`` to ``${D}``. The
-``bin_package`` class works well when the files extracted into ``${S}``
+:ref:`bin_package <ref-classes-bin-package>` class works well when the files extracted into ``${S}``
are already laid out in the way they should be laid out on the target.
For more information on these variables, see the
:term:`FILES`,
@@ -2497,7 +2496,7 @@
section in the Yocto Project Overview and Concepts Manual for more
information.
-If you cannot use the ``bin_package`` class, you need to be sure you are
+If you cannot use the :ref:`bin_package <ref-classes-bin-package>` class, you need to be sure you are
doing the following:
- Create a recipe where the
@@ -2537,7 +2536,7 @@
.. note::
- If image prelinking is enabled (e.g. "image-prelink" is in :term:`USER_CLASSES`
+ If image prelinking is enabled (e.g. :ref:`image-prelink <ref-classes-image-prelink>` is in :term:`USER_CLASSES`
which it is by default), prelink will change the binaries in the generated images
and this often catches people out. Remove that class to ensure binaries are
preserved exactly if that is necessary.
@@ -4459,19 +4458,16 @@
directory:
1. *Using Local Files Only:* Inside your ``local.conf`` file, add the
- :term:`SOURCE_MIRROR_URL`
- variable, inherit the
- :ref:`own-mirrors <ref-classes-own-mirrors>`
- class, and use the
- :term:`BB_NO_NETWORK`
- variable to your ``local.conf``.
+ :term:`SOURCE_MIRROR_URL` variable, inherit the
+ :ref:`own-mirrors <ref-classes-own-mirrors>` class, and use the
+ :term:`BB_NO_NETWORK` variable to your ``local.conf``.
::
SOURCE_MIRROR_URL ?= "file:///home/your-download-dir/"
INHERIT += "own-mirrors"
BB_NO_NETWORK = "1"
- The :term:`SOURCE_MIRROR_URL` and ``own-mirror``
+ The :term:`SOURCE_MIRROR_URL` and :ref:`own-mirrors <ref-classes-own-mirrors>`
class set up the system to use the downloads directory as your "own
mirror". Using the :term:`BB_NO_NETWORK` variable makes sure that
BitBake's fetching process in step 3 stays local, which means files
@@ -4672,7 +4668,7 @@
how the static library files are defined::
PACKAGE_BEFORE_PN ?= ""
- PACKAGES = "${PN}-dbg ${PN}-staticdev ${PN}-dev ${PN}-doc ${PN}-locale ${PACKAGE_BEFORE_PN} ${PN}"
+ PACKAGES = "${PN}-src ${PN}-dbg ${PN}-staticdev ${PN}-dev ${PN}-doc ${PN}-locale ${PACKAGE_BEFORE_PN} ${PN}"
PACKAGES_DYNAMIC = "^${PN}-locale-.*"
FILES = ""
@@ -4680,7 +4676,8 @@
${sysconfdir} ${sharedstatedir} ${localstatedir} \
${base_bindir}/* ${base_sbindir}/* \
${base_libdir}/*${SOLIBS} \
- ${base_prefix}/lib/udev/rules.d ${prefix}/lib/udev/rules.d \
+ ${base_prefix}/lib/udev ${prefix}/lib/udev \
+ ${base_libdir}/udev ${libdir}/udev \
${datadir}/${BPN} ${libdir}/${BPN}/* \
${datadir}/pixmaps ${datadir}/applications \
${datadir}/idl ${datadir}/omf ${datadir}/sounds \
@@ -4696,7 +4693,8 @@
FILES:${PN}-dev = "${includedir} ${FILES_SOLIBSDEV} ${libdir}/*.la \
${libdir}/*.o ${libdir}/pkgconfig ${datadir}/pkgconfig \
${datadir}/aclocal ${base_libdir}/*.o \
- ${libdir}/${BPN}/*.la ${base_libdir}/*.la"
+ ${libdir}/${BPN}/*.la ${base_libdir}/*.la \
+ ${libdir}/cmake ${datadir}/cmake"
SECTION:${PN}-dev = "devel"
ALLOW_EMPTY:${PN}-dev = "1"
RDEPENDS:${PN}-dev = "${PN} (= ${EXTENDPKGV})"
@@ -4730,11 +4728,14 @@
There are several examples in the ``meta-skeleton`` layer found in the
:term:`Source Directory`:
-- ``conf/multilib-example.conf`` configuration file
+- :oe_git:`conf/multilib-example.conf </openembedded-core/tree/meta-skeleton/conf/multilib-example.conf>`
+ configuration file.
-- ``conf/multilib-example2.conf`` configuration file
+- :oe_git:`conf/multilib-example2.conf </openembedded-core/tree/meta-skeleton/conf/multilib-example2.conf>`
+ configuration file.
-- ``recipes-multilib/images/core-image-multilib-example.bb`` recipe
+- :oe_git:`recipes-multilib/images/core-image-multilib-example.bb </openembedded-core/tree/meta-skeleton/recipes-multilib/images/core-image-multilib-example.bb>`
+ recipe
Preparing to Use Multilib
~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -4753,7 +4754,8 @@
Eventually, all recipes will be covered and this list will not be
needed.
-For the most part, the Multilib class extension works automatically to
+For the most part, the :ref:`Multilib <ref-classes-multilib*>`
+class extension works automatically to
extend the package name from ``${PN}`` to ``${MLPREFIX}${PN}``, where
:term:`MLPREFIX` is the particular multilib (e.g. "lib32-" or "lib64-").
Standard variables such as
@@ -4765,8 +4767,7 @@
:term:`PACKAGES_DYNAMIC` are
automatically extended by the system. If you are extending any manual
code in the recipe, you can use the ``${MLPREFIX}`` variable to ensure
-those names are extended correctly. This automatic extension code
-resides in ``multilib.bbclass``.
+those names are extended correctly.
Using Multilib
~~~~~~~~~~~~~~
@@ -4948,8 +4949,7 @@
Enabling GObject Introspection Support
======================================
-`GObject
-introspection <https://wiki.gnome.org/Projects/GObjectIntrospection>`__
+`GObject introspection <https://gi.readthedocs.io/en/latest/>`__
is the standard mechanism for accessing GObject-based software from
runtime environments. GObject is a feature of the GLib library that
provides an object framework for the GNOME desktop and related software.
@@ -4961,7 +4961,7 @@
This section describes the Yocto Project support for generating and
packaging GObject introspection data. GObject introspection data is a
-description of the API provided by libraries built on top of GLib
+description of the API provided by libraries built on top of the GLib
framework, and, in particular, that framework's GObject mechanism.
GObject Introspection Repository (GIR) files go to ``-dev`` packages,
``typelib`` files go to main packages as they are packaged together with
@@ -5007,7 +5007,7 @@
.. note::
See recipes in the ``oe-core`` repository that use that
- ``GIR_EXTRA_LIBS_PATH`` variable as an example.
+ :term:`GIR_EXTRA_LIBS_PATH` variable as an example.
4. Look for any other errors, which probably mean that introspection
support in a package is not entirely standard, and thus breaks down
@@ -5602,13 +5602,13 @@
./mkefidisk-201804191017-sda.direct
The following build artifacts were used to create the image(s):
- ROOTFS_DIR: /home/stephano/build/master/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs
- BOOTIMG_DIR: /home/stephano/build/master/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
- KERNEL_DIR: /home/stephano/build/master/build/tmp-glibc/deploy/images/qemux86
- NATIVE_SYSROOT: /home/stephano/build/master/build/tmp-glibc/work/i586-oe-linux/wic-tools/1.0-r0/recipe-sysroot-native
+ ROOTFS_DIR: /home/stephano/yocto/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs
+ BOOTIMG_DIR: /home/stephano/yocto/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
+ KERNEL_DIR: /home/stephano/yocto/build/tmp-glibc/deploy/images/qemux86
+ NATIVE_SYSROOT: /home/stephano/yocto/build/tmp-glibc/work/i586-oe-linux/wic-tools/1.0-r0/recipe-sysroot-native
INFO: The image(s) were created using OE kickstart file:
- /home/stephano/build/master/openembedded-core/scripts/lib/wic/canned-wks/mkefidisk.wks
+ /home/stephano/yocto/openembedded-core/scripts/lib/wic/canned-wks/mkefidisk.wks
The previous example shows the easiest way to create an image by running
in cooked mode and supplying a kickstart file and the "-e" option to
@@ -5669,8 +5669,8 @@
the lines that specify the target disk from which to boot.
::
- $ cp /home/stephano/poky/scripts/lib/wic/canned-wks/directdisk-gpt.wks \
- /home/stephano/poky/scripts/lib/wic/canned-wks/directdisksdb-gpt.wks
+ $ cp /home/stephano/yocto/poky/scripts/lib/wic/canned-wks/directdisk-gpt.wks \
+ /home/stephano/yocto/poky/scripts/lib/wic/canned-wks/directdisksdb-gpt.wks
Next, the example modifies the ``directdisksdb-gpt.wks`` file and
changes all instances of "``--ondisk sda``" to "``--ondisk sdb``". The
@@ -5702,13 +5702,13 @@
./directdisksdb-gpt-201710090938-sdb.direct
The following build artifacts were used to create the image(s):
- ROOTFS_DIR: /home/stephano/build/master/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs
- BOOTIMG_DIR: /home/stephano/build/master/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
- KERNEL_DIR: /home/stephano/build/master/build/tmp-glibc/deploy/images/qemux86
- NATIVE_SYSROOT: /home/stephano/build/master/build/tmp-glibc/work/i586-oe-linux/wic-tools/1.0-r0/recipe-sysroot-native
+ ROOTFS_DIR: /home/stephano/yocto/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs
+ BOOTIMG_DIR: /home/stephano/yocto/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
+ KERNEL_DIR: /home/stephano/yocto/build/tmp-glibc/deploy/images/qemux86
+ NATIVE_SYSROOT: /home/stephano/yocto/build/tmp-glibc/work/i586-oe-linux/wic-tools/1.0-r0/recipe-sysroot-native
INFO: The image(s) were created using OE kickstart file:
- /home/stephano/poky/scripts/lib/wic/canned-wks/directdisksdb-gpt.wks
+ /home/stephano/yocto/poky/scripts/lib/wic/canned-wks/directdisksdb-gpt.wks
Continuing with the example, you can now directly ``dd`` the image to a
USB stick, or whatever media for which you built your image, and boot
@@ -5728,11 +5728,11 @@
``-o`` option to cause Wic to create the output somewhere other than the
default output directory, which is the current directory::
- $ wic create /home/stephano/my_yocto/test.wks -o /home/stephano/testwic \
- --rootfs-dir /home/stephano/build/master/build/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/rootfs \
- --bootimg-dir /home/stephano/build/master/build/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share \
- --kernel-dir /home/stephano/build/master/build/tmp/deploy/images/qemux86 \
- --native-sysroot /home/stephano/build/master/build/tmp/work/i586-poky-linux/wic-tools/1.0-r0/recipe-sysroot-native
+ $ wic create test.wks -o /home/stephano/testwic \
+ --rootfs-dir /home/stephano/yocto/build/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/rootfs \
+ --bootimg-dir /home/stephano/yocto/build/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share \
+ --kernel-dir /home/stephano/yocto/build/tmp/deploy/images/qemux86 \
+ --native-sysroot /home/stephano/yocto/build/tmp/work/i586-poky-linux/wic-tools/1.0-r0/recipe-sysroot-native
INFO: Creating image(s)...
@@ -5740,13 +5740,13 @@
/home/stephano/testwic/test-201710091445-sdb.direct
The following build artifacts were used to create the image(s):
- ROOTFS_DIR: /home/stephano/build/master/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs
- BOOTIMG_DIR: /home/stephano/build/master/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
- KERNEL_DIR: /home/stephano/build/master/build/tmp-glibc/deploy/images/qemux86
- NATIVE_SYSROOT: /home/stephano/build/master/build/tmp-glibc/work/i586-oe-linux/wic-tools/1.0-r0/recipe-sysroot-native
+ ROOTFS_DIR: /home/stephano/yocto/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs
+ BOOTIMG_DIR: /home/stephano/yocto/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
+ KERNEL_DIR: /home/stephano/yocto/build/tmp-glibc/deploy/images/qemux86
+ NATIVE_SYSROOT: /home/stephano/yocto/build/tmp-glibc/work/i586-oe-linux/wic-tools/1.0-r0/recipe-sysroot-native
INFO: The image(s) were created using OE kickstart file:
- /home/stephano/my_yocto/test.wks
+ test.wks
For this example,
:term:`MACHINE` did not have to be
@@ -6242,8 +6242,11 @@
``conf-notes.txt`` in your custom template configuration directory and
making sure you have ``TEMPLATECONF`` set to your directory.
+Conserving Disk Space
+=====================
+
Conserving Disk Space During Builds
-===================================
+-----------------------------------
To help conserve disk space during builds, you can add the following
statement to your project's ``local.conf`` configuration file found in
@@ -6257,6 +6260,26 @@
:ref:`rm_work <ref-classes-rm-work>` class in the
Yocto Project Reference Manual.
+Purging Duplicate Shared State Cache Files
+-------------------------------------------
+
+After multiple build iterations, the Shared State (sstate) cache can contain
+duplicate cache files for a given package, while only the most recent one
+is likely to be reusable. The following command purges all but the
+newest sstate cache file for each package::
+
+ sstate-cache-management.sh --remove-duplicated --cache-dir=build/sstate-cache
+
+This command will ask you to confirm the deletions it identifies.
+
+Note::
+
+ The duplicated sstate cache files of one package must have the same
+ architecture, which means that sstate cache files with multiple
+ architectures are not considered as duplicate.
+
+Run ``sstate-cache-management.sh`` for more details about this script.
+
Working with Packages
=====================
@@ -7078,7 +7101,7 @@
In order to add security to RPM packages used during a build, you can
take steps to securely sign them. Once a signature is verified, the
OpenEmbedded build system can use the package in the build. If security
-fails for a signed package, the build system aborts the build.
+fails for a signed package, the build system stops the build.
This section describes how to sign RPM packages during a build and how
to use signed package feeds (repositories) when doing a build.
@@ -8373,11 +8396,11 @@
certain devices it can also deploy the image to be tested onto the
device beforehand.
-For automated deployment, a "master image" is installed onto the
+For automated deployment, a "controller image" is installed onto the
hardware once as part of setup. Then, each time tests are to be run, the
following occurs:
-1. The master image is booted into and used to write the image to be
+1. The controller image is booted into and used to write the image to be
tested to a second partition.
2. The device is then rebooted using an external script that you need to
@@ -8446,15 +8469,15 @@
":ref:`dev-manual/common-tasks:running tests`" section.
If you did set :term:`TEST_TARGET` to "SystemdbootTarget", you also need to
-perform a one-time setup of your master image by doing the following:
+perform a one-time setup of your controller image by doing the following:
1. *Set EFI_PROVIDER:* Be sure that :term:`EFI_PROVIDER` is as follows::
EFI_PROVIDER = "systemd-boot"
-2. *Build the master image:* Build the ``core-image-testmaster`` image.
+2. *Build the controller image:* Build the ``core-image-testmaster`` image.
The ``core-image-testmaster`` recipe is provided as an example for a
- "master" image and you can customize the image recipe as you would
+ "controller" image and you can customize the image recipe as you would
any other recipe.
Here are the image recipe requirements:
@@ -8466,14 +8489,14 @@
- Uses a custom Initial RAM Disk (initramfs) image with a custom
installer. A normal image that you can install usually creates a
- single rootfs partition. This image uses another installer that
+ single root filesystem partition. This image uses another installer that
creates a specific partition layout. Not all Board Support
Packages (BSPs) can use an installer. For such cases, you need to
manually create the following partition layout on the target:
- First partition mounted under ``/boot``, labeled "boot".
- - The main rootfs partition where this image gets installed,
+ - The main root filesystem partition where this image gets installed,
which is mounted under ``/``.
- Another partition labeled "testrootfs" where test images get
@@ -9569,51 +9592,51 @@
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/types.h include/near/types.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/log.h include/near/log.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/plugin.h include/near/plugin.h
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/tag.h include/near/tag.h
| /bin/mkdir -p include/near
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/adapter.h include/near/adapter.h
| /bin/mkdir -p include/near
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/ndef.h include/near/ndef.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/tlv.h include/near/tlv.h
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/setting.h include/near/setting.h
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
| /bin/mkdir -p include/near
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/device.h include/near/device.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/nfc_copy.h include/near/nfc_copy.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/snep.h include/near/snep.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/version.h include/near/version.h
- | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
+ | ln -s /home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/
0.14-r0/neard-0.14/include/dbus.h include/near/dbus.h
| ./src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h
- | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/
+ | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/pokybuild/yocto-autobuilder/nightly-x86/
build/build/tmp/sysroots/qemux86 -DHAVE_CONFIG_H -I. -I./include -I./src -I./gdbus -I/home/pokybuild/
- yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/glib-2.0
- -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/sysroots/qemux86/usr/
- lib/glib-2.0/include -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/
- tmp/sysroots/qemux86/usr/include/dbus-1.0 -I/home/pokybuild/yocto-autobuilder/yocto-slave/
+ yocto-autobuilder/nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/glib-2.0
+ -I/home/pokybuild/yocto-autobuilder/nightly-x86/build/build/tmp/sysroots/qemux86/usr/
+ lib/glib-2.0/include -I/home/pokybuild/yocto-autobuilder/nightly-x86/build/build/
+ tmp/sysroots/qemux86/usr/include/dbus-1.0 -I/home/pokybuild/yocto-autobuilder/
nightly-x86/build/build/tmp/sysroots/qemux86/usr/lib/dbus-1.0/include -I/home/pokybuild/yocto-autobuilder/
- yocto-slave/nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/libnl3
+ nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/libnl3
-DNEAR_PLUGIN_BUILTIN -DPLUGINDIR=\""/usr/lib/near/plugins"\"
-DCONFIGDIR=\""/etc/neard\"" -O2 -pipe -g -feliminate-unused-debug-types -c
-o tools/snep-send.o tools/snep-send.c
@@ -10791,12 +10814,12 @@
LICENSE_FLAGS_WHITELIST = "commercial_gst-plugins-ugly license_emgd_1.10"
As a convenience, you do not need to specify the
-complete license string in the whitelist for every package. You can use
+complete license string for every package. You can use
an abbreviated form, which consists of just the first portion or
portions of the license string before the initial underscore character
or characters. A partial string will match any license that contains the
given string as the first portion of its license. For example, the
-following whitelist string will also match both of the packages
+following value will also match both of the packages
previously mentioned as well as any other packages that have licenses
starting with "commercial" or "license".
::
@@ -10809,8 +10832,8 @@
License flag matching allows you to control what recipes the
OpenEmbedded build system includes in the build. Fundamentally, the
build system attempts to match :term:`LICENSE_FLAGS` strings found in
-recipes against :term:`LICENSE_FLAGS_WHITELIST` strings found in the
-whitelist. A match causes the build system to include a recipe in the
+recipes against strings found in :term:`LICENSE_FLAGS_WHITELIST`.
+A match causes the build system to include a recipe in the
build, while failure to find a match causes the build system to exclude
a recipe.
@@ -10818,18 +10841,19 @@
concepts will help you correctly and effectively use matching.
Before a flag defined by a particular recipe is tested against the
-contents of the whitelist, the expanded string ``_${PN}`` is appended to
-the flag. This expansion makes each :term:`LICENSE_FLAGS` value
-recipe-specific. After expansion, the string is then matched against the
-whitelist. Thus, specifying ``LICENSE_FLAGS = "commercial"`` in recipe
-"foo", for example, results in the string ``"commercial_foo"``. And, to
-create a match, that string must appear in the whitelist.
+entries of :term:`LICENSE_FLAGS_WHITELIST`, the expanded
+string ``_${PN}`` is appended to the flag. This expansion makes each
+:term:`LICENSE_FLAGS` value recipe-specific. After expansion, the
+string is then matched against the entries. Thus, specifying
+``LICENSE_FLAGS = "commercial"`` in recipe "foo", for example, results
+in the string ``"commercial_foo"``. And, to create a match, that string
+must appear among the entries of :term:`LICENSE_FLAGS_WHITELIST`.
Judicious use of the :term:`LICENSE_FLAGS` strings and the contents of the
:term:`LICENSE_FLAGS_WHITELIST` variable allows you a lot of flexibility for
including or excluding recipes based on licensing. For example, you can
broaden the matching capabilities by using license flags string subsets
-in the whitelist.
+in :term:`LICENSE_FLAGS_WHITELIST`.
.. note::
@@ -10837,43 +10861,44 @@
string that precedes the appended underscore character (e.g.
``usethispart_1.3``, ``usethispart_1.4``, and so forth).
-For example, simply specifying the string "commercial" in the whitelist
-matches any expanded :term:`LICENSE_FLAGS` definition that starts with the
-string "commercial" such as "commercial_foo" and "commercial_bar", which
+For example, simply specifying the string "commercial" in the
+:term:`LICENSE_FLAGS_WHITELIST` variable matches any expanded
+:term:`LICENSE_FLAGS` definition that starts with the string
+"commercial" such as "commercial_foo" and "commercial_bar", which
are the strings the build system automatically generates for
hypothetical recipes named "foo" and "bar" assuming those recipes simply
specify the following::
LICENSE_FLAGS = "commercial"
-Thus, you can choose
-to exhaustively enumerate each license flag in the whitelist and allow
-only specific recipes into the image, or you can use a string subset
-that causes a broader range of matches to allow a range of recipes into
-the image.
+Thus, you can choose to exhaustively enumerate each license flag in the
+list and allow only specific recipes into the image, or you can use a
+string subset that causes a broader range of matches to allow a range of
+recipes into the image.
This scheme works even if the :term:`LICENSE_FLAGS` string already has
``_${PN}`` appended. For example, the build system turns the license
flag "commercial_1.2_foo" into "commercial_1.2_foo_foo" and would match
both the general "commercial" and the specific "commercial_1.2_foo"
-strings found in the whitelist, as expected.
+strings found in the :term:`LICENSE_FLAGS_WHITELIST` variable, as expected.
Here are some other scenarios:
- You can specify a versioned string in the recipe such as
"commercial_foo_1.2" in a "foo" recipe. The build system expands this
string to "commercial_foo_1.2_foo". Combine this license flag with a
- whitelist that has the string "commercial" and you match the flag
- along with any other flag that starts with the string "commercial".
+ :term:`LICENSE_FLAGS_WHITELIST` variable that has the string
+ "commercial" and you match the flag along with any other flag that
+ starts with the string "commercial".
-- Under the same circumstances, you can use "commercial_foo" in the
- whitelist and the build system not only matches "commercial_foo_1.2"
- but also matches any license flag with the string "commercial_foo",
- regardless of the version.
+- Under the same circumstances, you can add "commercial_foo" in the
+ :term:`LICENSE_FLAGS_WHITELIST` variable and the build system not only
+ matches "commercial_foo_1.2" but also matches any license flag with
+ the string "commercial_foo", regardless of the version.
- You can be very specific and use both the package and version parts
- in the whitelist (e.g. "commercial_foo_1.2") to specifically match a
- versioned recipe.
+ in the :term:`LICENSE_FLAGS_WHITELIST` list (e.g.
+ "commercial_foo_1.2") to specifically match a versioned recipe.
Other Variables Related to Commercial Licenses
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -10897,9 +10922,10 @@
LICENSE_FLAGS_WHITELIST = "commercial_gst-plugins-ugly commercial_gst-plugins-bad commercial_qmmp"
-Of course, you could also create a matching whitelist for those
-components using the more general "commercial" in the whitelist, but
-that would also enable all the other packages with :term:`LICENSE_FLAGS`
+Of course, you could also create a matching list for those
+components using the more general "commercial" in the
+:term:`LICENSE_FLAGS_WHITELIST` variable, but that would also enable all
+the other packages with :term:`LICENSE_FLAGS`
containing "commercial", which you may or may not want::
LICENSE_FLAGS_WHITELIST = "commercial"
@@ -10972,7 +10998,7 @@
an :ref:`archiver <ref-classes-archiver>` class to
help avoid some of these concerns.
-Before you employ :term:`DL_DIR` or the ``archiver`` class, you need to
+Before you employ :term:`DL_DIR` or the :ref:`archiver <ref-classes-archiver>` class, you need to
decide how you choose to provide source. The source ``archiver`` class
can generate tarballs and SRPMs and can create them with various levels
of compliance in mind.
diff --git a/poky/documentation/dev-manual/start.rst b/poky/documentation/dev-manual/start.rst
index 1ca2531..9c7dde8 100644
--- a/poky/documentation/dev-manual/start.rst
+++ b/poky/documentation/dev-manual/start.rst
@@ -666,32 +666,6 @@
"DOWNLOADS" page, you can download tools or BSPs as well. Just scroll
down the page and look for what you need.
-Accessing Nightly Builds
-------------------------
-
-Yocto Project maintains an area for nightly builds that contains tarball
-releases at https://autobuilder.yocto.io/pub/nightly/. These builds include Yocto
-Project releases ("poky"), toolchains, and builds for supported
-machines.
-
-Should you ever want to access a nightly build of a particular Yocto
-Project component, use the following procedure:
-
-1. *Locate the Index of Nightly Builds:* Open a browser and go to
- https://autobuilder.yocto.io/pub/nightly/ to access the Nightly Builds.
-
-2. *Select a Date:* Click on the date in which you are interested. If
- you want the latest builds, use "CURRENT".
-
-3. *Select a Build:* Choose the area in which you are interested. For
- example, if you are looking for the most recent toolchains, select
- the "toolchain" link.
-
-4. *Find the Tarball:* Drill down to find the associated tarball.
-
-5. *Download the Tarball:* Click the tarball to download and save a
- snapshot of the given component.
-
Cloning and Checking Out Branches
=================================
diff --git a/poky/documentation/kernel-dev/advanced.rst b/poky/documentation/kernel-dev/advanced.rst
index 2dbcca6..b5290b6 100644
--- a/poky/documentation/kernel-dev/advanced.rst
+++ b/poky/documentation/kernel-dev/advanced.rst
@@ -688,12 +688,11 @@
---------------------
When stored in recipe-space, the kernel Metadata files reside in a
-directory hierarchy below
-:term:`FILESEXTRAPATHS`. For
-a linux-yocto recipe or for a Linux kernel recipe derived by copying and
-modifying
-``oe-core/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb`` to
-a recipe in your layer, :term:`FILESEXTRAPATHS` is typically set to
+directory hierarchy below :term:`FILESEXTRAPATHS`. For
+a linux-yocto recipe or for a Linux kernel recipe derived by copying
+:oe_git:`meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
+</openembedded-core/tree/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb>`
+into your layer and modifying it, :term:`FILESEXTRAPATHS` is typically set to
``${``\ :term:`THISDIR`\ ``}/${``\ :term:`PN`\ ``}``.
See the ":ref:`kernel-dev/common:modifying an existing recipe`"
section for more information.
@@ -764,7 +763,7 @@
======================
Many recipes based on the ``linux-yocto-custom.bb`` recipe use Linux
-kernel sources that have only a single branch - "master". This type of
+kernel sources that have only a single branch. This type of
repository structure is fine for linear development supporting a single
machine and architecture. However, if you work with multiple boards and
architectures, a kernel source repository with multiple branches is more
@@ -773,7 +772,7 @@
fundamentally wrong, yet they are still necessary for specific boards.
In these situations, you most likely do not want to include these
patches in every kernel you build (i.e. have the patches as part of the
-lone "master" branch). It is situations like these that give rise to
+default branch). It is situations like these that give rise to
multiple branches used within a Linux kernel sources Git repository.
Here are repository organization strategies maximizing source reuse,
@@ -813,7 +812,7 @@
When you have multiple machines and architectures to support, or you are
actively working on board support, it is more efficient to create
branches in the repository based on individual machines. Having machine
-branches allows common source to remain in the "master" branch with any
+branches allows common source to remain in the development branch with any
features specific to a machine stored in the appropriate machine branch.
This organization method frees you from continually reintegrating your
patches into a feature.
diff --git a/poky/documentation/kernel-dev/common.rst b/poky/documentation/kernel-dev/common.rst
index d42ca5f..a5dd02c 100644
--- a/poky/documentation/kernel-dev/common.rst
+++ b/poky/documentation/kernel-dev/common.rst
@@ -1578,13 +1578,11 @@
on a future, mutually-supported kernel version.
To help you use your own sources, the Yocto Project provides a
-linux-yocto custom recipe (``linux-yocto-custom.bb``) that uses
-``kernel.org`` sources and the Yocto Project Linux kernel tools for
-managing kernel Metadata. You can find this recipe in the ``poky`` Git
-repository of the Yocto Project :yocto_git:`Source Repository <>`
-at::
-
- poky/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
+linux-yocto custom recipe that uses ``kernel.org`` sources and
+the Yocto Project Linux kernel tools for managing kernel Metadata.
+You can find this recipe in the ``poky`` Git repository:
+:yocto_git:`meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
+</poky/tree/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb>`.
Here are some basic steps you can use to work with your own sources:
@@ -1729,11 +1727,9 @@
create your own out-of-tree Linux kernel module recipe.
This template recipe is located in the ``poky`` Git repository of the
-Yocto Project :yocto_git:`Source Repository <>` at:
-
-.. code-block:: none
-
- poky/meta-skeleton/recipes-kernel/hello-mod/hello-mod_0.1.bb
+Yocto Project:
+:yocto_git:`meta-skeleton/recipes-kernel/hello-mod/hello-mod_0.1.bb
+</poky/tree/meta-skeleton/recipes-kernel/hello-mod/hello-mod_0.1.bb>`.
To get started, copy this recipe to your layer and give it a meaningful
name (e.g. ``mymodule_1.0.bb``). In the same directory, create a new
diff --git a/poky/documentation/kernel-dev/concepts-appx.rst b/poky/documentation/kernel-dev/concepts-appx.rst
index cf2e75d..910318e 100644
--- a/poky/documentation/kernel-dev/concepts-appx.rst
+++ b/poky/documentation/kernel-dev/concepts-appx.rst
@@ -211,8 +211,8 @@
``kernel.org``, through a select group of features and ends with their
BSP-specific commits. In other words, the divisions of the kernel are
transparent and are not relevant to the developer on a day-to-day basis.
-From the developer's perspective, this path is the "master" branch in
-Git terms. The developer does not need to be aware of the existence of
+From the developer's perspective, this path is the development branch.
+The developer does not need to be aware of the existence of
any other branches at all. Of course, it can make sense to have these
branches in the tree, should a person decide to explore them. For
example, a comparison between two BSPs at either the commit level or at
diff --git a/poky/documentation/kernel-dev/faq.rst b/poky/documentation/kernel-dev/faq.rst
index 5aa702a..e40e3ff 100644
--- a/poky/documentation/kernel-dev/faq.rst
+++ b/poky/documentation/kernel-dev/faq.rst
@@ -30,8 +30,8 @@
":ref:`kernel-dev/common:working with your own sources`"
section for information.
-How do I install/not-install the kernel image on the rootfs?
-------------------------------------------------------------
+How do I install/not-install the kernel image on the root filesystem?
+---------------------------------------------------------------------
The kernel image (e.g. ``vmlinuz``) is provided by the
``kernel-image`` package. Image recipes depend on ``kernel-base``. To
diff --git a/poky/documentation/migration-guides/index.rst b/poky/documentation/migration-guides/index.rst
index 287b553..6472cc2 100644
--- a/poky/documentation/migration-guides/index.rst
+++ b/poky/documentation/migration-guides/index.rst
@@ -12,6 +12,7 @@
.. toctree::
migration-general
+ migration-3.5
migration-3.4
migration-3.3
migration-3.2
diff --git a/poky/documentation/migration-guides/migration-1.3.rst b/poky/documentation/migration-guides/migration-1.3.rst
index afb868e..9a15391 100644
--- a/poky/documentation/migration-guides/migration-1.3.rst
+++ b/poky/documentation/migration-guides/migration-1.3.rst
@@ -113,7 +113,7 @@
to remove anything now handled by ``packagegroup.bbclass``, such as
providing ``-dev`` and ``-dbg`` packages, setting
:term:`LIC_FILES_CHKSUM`, and so forth. See the
-":ref:`packagegroup.bbclass <ref-classes-packagegroup>`" section for
+:ref:`ref-classes-packagegroup` section for
further details.
.. _migration-1.3-image-features:
diff --git a/poky/documentation/migration-guides/migration-1.5.rst b/poky/documentation/migration-guides/migration-1.5.rst
index 11c8212..0306b99 100644
--- a/poky/documentation/migration-guides/migration-1.5.rst
+++ b/poky/documentation/migration-guides/migration-1.5.rst
@@ -87,22 +87,21 @@
item not mentioned in :term:`ERROR_QA` or :term:`WARN_QA` would be treated as
a warning. Consequently, several important items were not already in
the default value of :term:`WARN_QA`. All of the possible QA checks are
- now documented in the ":ref:`insane.bbclass <ref-classes-insane>`"
- section.
+ now documented in the ":ref:`ref-classes-insane`" section.
- An additional QA check has been added to check if
``/usr/share/info/dir`` is being installed. Your recipe should delete
this file within :ref:`ref-tasks-install` if "make
install" is installing it.
-- If you are using the ``buildhistory`` class, the check for the package
+- If you are using the :ref:`buildhistory <ref-classes-buildhistory>` class,
+ the check for the package
version going backwards is now controlled using a standard QA check.
Thus, if you have customized your :term:`ERROR_QA` or :term:`WARN_QA` values
and still wish to have this check performed, you should add
"version-going-backwards" to your value for one or the other
variables depending on how you wish it to be handled. See the
- documented QA checks in the
- ":ref:`insane.bbclass <ref-classes-insane>`" section.
+ documented QA checks in the ":ref:`ref-classes-insane`" section.
.. _migration-1.5-directory-layout-changes:
@@ -221,8 +220,7 @@
them from ``task-*`` to ``packagegroup-*`` and inherit packagegroup
instead.
-For more information, see the
-":ref:`packagegroup.bbclass <ref-classes-packagegroup>`" section.
+For more information, see the ":ref:`ref-classes-packagegroup`" section.
.. _migration-1.5-busybox:
diff --git a/poky/documentation/migration-guides/migration-1.6.rst b/poky/documentation/migration-guides/migration-1.6.rst
index eea3d17..3580865 100644
--- a/poky/documentation/migration-guides/migration-1.6.rst
+++ b/poky/documentation/migration-guides/migration-1.6.rst
@@ -222,8 +222,7 @@
information on using Package Tests, see the
":ref:`dev-manual/common-tasks:testing packages with ptest`"
section in the Yocto Project Development Tasks Manual. For information on the
-``ptest`` class, see the ":ref:`ptest.bbclass <ref-classes-ptest>`"
-section.
+``ptest`` class, see the ":ref:`ref-classes-ptest`" section.
.. _migration-1.6-build-changes:
@@ -231,7 +230,7 @@
-------------
Separate build and source directories have been enabled by default for
-selected recipes where it is known to work (a whitelist) and for all
+selected recipes where it is known to work and for all
recipes that inherit the :ref:`cmake <ref-classes-cmake>` class. In
future releases the :ref:`autotools <ref-classes-autotools>` class
will enable a separate build directory by default as well. Recipes
diff --git a/poky/documentation/migration-guides/migration-1.7.rst b/poky/documentation/migration-guides/migration-1.7.rst
index 8c642da..88a6855 100644
--- a/poky/documentation/migration-guides/migration-1.7.rst
+++ b/poky/documentation/migration-guides/migration-1.7.rst
@@ -43,7 +43,8 @@
occurred:
- *A separate build directory is now used by default:* The
- ``autotools`` class has been changed to use a directory for building
+ :ref:`autotools <ref-classes-autotools>` class has been
+ changed to use a directory for building
(:term:`B`), which is separate from the source directory
(:term:`S`). This is commonly referred to as ``B != S``, or
an out-of-tree build.
@@ -54,7 +55,8 @@
manner, you will need to either patch the software so that it can
build separately, or you will need to change the recipe to inherit
the :ref:`autotools-brokensep <ref-classes-autotools>` class
- instead of the ``autotools`` or ``autotools_stage`` classes.
+ instead of the :ref:`autotools <ref-classes-autotools>`
+ or ``autotools_stage`` classes.
- The ``--foreign`` option is no longer passed to ``automake`` when
running ``autoconf``: This option tells ``automake`` that a
diff --git a/poky/documentation/migration-guides/migration-2.1.rst b/poky/documentation/migration-guides/migration-2.1.rst
index 3135d69..eb29694 100644
--- a/poky/documentation/migration-guides/migration-2.1.rst
+++ b/poky/documentation/migration-guides/migration-2.1.rst
@@ -106,12 +106,12 @@
large file support is enabled. For most software that uses ``autoconf``,
this change should not be a problem. However, if you have a recipe that
bypasses the standard :ref:`ref-tasks-configure` task
-from the ``autotools`` class and the software the recipe is building
+from the :ref:`autotools <ref-classes-autotools>` class and the software the recipe is building
uses a very old version of ``autoconf``, the recipe might be incapable
of determining the correct size of ``off_t`` during ``do_configure``.
The best course of action is to patch the software as necessary to allow
-the default implementation from the ``autotools`` class to work such
+the default implementation from the :ref:`autotools <ref-classes-autotools>` class to work such
that ``autoreconf`` succeeds and produces a working configure script,
and to remove the overridden ``do_configure`` task such that the default
implementation does get used.
@@ -262,7 +262,7 @@
With this class enabled, a tarball containing a pre-built C library
is downloaded at the start of the build.
- The ``uninative`` class is enabled through the
+ The :ref:`uninative <ref-classes-uninative>` class is enabled through the
``meta/conf/distro/include/yocto-uninative.inc`` file, which for
those not using the Poky distribution, can include to easily enable
the same functionality.
diff --git a/poky/documentation/migration-guides/migration-2.2.rst b/poky/documentation/migration-guides/migration-2.2.rst
index cbdc6a7..a6c1a4a 100644
--- a/poky/documentation/migration-guides/migration-2.2.rst
+++ b/poky/documentation/migration-guides/migration-2.2.rst
@@ -154,7 +154,7 @@
Using a configuration file is particularly convenient when trying to use
QEMU with machines other than the ``qemu*`` machines in
:term:`OpenEmbedded-Core (OE-Core)`. The ``qemuboot.conf`` file is generated by the
-``qemuboot`` class when the root filesystem is being build (i.e. build
+``qemuboot`` class when the root filesystem is being built (i.e. build
rootfs). QEMU boot arguments can be set in BSP's configuration file and
the ``qemuboot`` class will save them to ``qemuboot.conf``.
@@ -439,7 +439,7 @@
- ``packagegroup-core-tools-testapps``: Removed Piglit.
-- ``image.bbclass``: Renamed COMPRESS(ION) to CONVERSION. This change
+- :ref:`image.bbclass <ref-classes-image>`: Renamed COMPRESS(ION) to CONVERSION. This change
means that ``COMPRESSIONTYPES``, ``COMPRESS_DEPENDS`` and
``COMPRESS_CMD`` are deprecated in favor of ``CONVERSIONTYPES``,
``CONVERSION_DEPENDS`` and ``CONVERSION_CMD``. The ``COMPRESS*``
diff --git a/poky/documentation/migration-guides/migration-2.3.rst b/poky/documentation/migration-guides/migration-2.3.rst
index b79bc54..0b6b33d 100644
--- a/poky/documentation/migration-guides/migration-2.3.rst
+++ b/poky/documentation/migration-guides/migration-2.3.rst
@@ -50,7 +50,7 @@
post-installation script that is installed by a function added to
:term:`SYSROOT_PREPROCESS_FUNCS`.
- For an example, see the ``pixbufcache`` class in ``meta/classes/`` in
+ For an example, see the :ref:`pixbufcache <ref-classes-pixbufcache>` class in ``meta/classes/`` in
the :ref:`overview-manual/development-environment:yocto project source repositories`.
.. note::
diff --git a/poky/documentation/migration-guides/migration-2.4.rst b/poky/documentation/migration-guides/migration-2.4.rst
index ae1a212..ef5f32e 100644
--- a/poky/documentation/migration-guides/migration-2.4.rst
+++ b/poky/documentation/migration-guides/migration-2.4.rst
@@ -273,7 +273,7 @@
a single commit per build rather than one commit per subdirectory in
the repository. This behavior assumes the commits are enabled with
:term:`BUILDHISTORY_COMMIT` = "1", which
- is typical. Previously, the ``buildhistory`` class made one commit
+ is typical. Previously, the :ref:`buildhistory <ref-classes-buildhistory>` class made one commit
per subdirectory in the repository in order to make it easier to see
the changes for a particular subdirectory. To view a particular
change, specify that subdirectory as the last parameter on the
diff --git a/poky/documentation/migration-guides/migration-2.5.rst b/poky/documentation/migration-guides/migration-2.5.rst
index 79f804f..abd2680 100644
--- a/poky/documentation/migration-guides/migration-2.5.rst
+++ b/poky/documentation/migration-guides/migration-2.5.rst
@@ -137,7 +137,7 @@
- Several explicit "run this task for all recipes in the dependency
tree" tasks have been removed (e.g. ``fetchall``, ``checkuriall``,
and the ``*all`` tasks provided by the ``distrodata`` and
- ``archiver`` classes). There is a BitBake option to complete this for
+ :ref:`archiver <ref-classes-archiver>` classes). There is a BitBake option to complete this for
any arbitrary task. For example::
bitbake <target> -c fetchall
@@ -187,7 +187,7 @@
The following are additional changes:
-- The ``kernel`` class supports building packages for multiple kernels.
+- The :ref:`kernel <ref-classes-kernel>` class supports building packages for multiple kernels.
If your kernel recipe or ``.bbappend`` file mentions packaging at
all, you should replace references to the kernel in package names
with ``${KERNEL_PACKAGE_NAME}``. For example, if you disable
@@ -195,7 +195,7 @@
``RDEPENDS_kernel-base = ""`` you can avoid warnings using
``RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""`` instead.
-- The ``buildhistory`` class commits changes to the repository by
+- The :ref:`buildhistory <ref-classes-buildhistory>` class commits changes to the repository by
default so you no longer need to set ``BUILDHISTORY_COMMIT = "1"``.
If you want to disable commits you need to set
``BUILDHISTORY_COMMIT = "0"`` in your configuration.
@@ -207,7 +207,7 @@
maintains a full-featured BSP in the ``meta-ti`` layer. This rename
avoids the previous name clash that existed between the two BSPs.
-- The ``update-alternatives`` class no longer works with SysV ``init``
+- The :ref:`update-alternatives <ref-classes-update-alternatives>` class no longer works with SysV ``init``
scripts because this usage has been problematic. Also, the
``sysklogd`` recipe no longer uses ``update-alternatives`` because it
is incompatible with other implementations.
@@ -287,7 +287,7 @@
- For EFI-based machines, the bootloader (``grub-efi`` by default) is
installed into the image at /boot. Wic can be used to split the
- bootloader into separate boot and rootfs partitions if necessary.
+ bootloader into separate boot and root filesystem partitions if necessary.
- Patches whose context does not match exactly (i.e. where patch
reports "fuzz" when applying) will generate a warning. For an example
diff --git a/poky/documentation/migration-guides/migration-2.6.rst b/poky/documentation/migration-guides/migration-2.6.rst
index a8c56ed..c68414e 100644
--- a/poky/documentation/migration-guides/migration-2.6.rst
+++ b/poky/documentation/migration-guides/migration-2.6.rst
@@ -363,7 +363,7 @@
You must explicitly mark post installs to defer to the target. If you
want to explicitly defer a postinstall to first boot on the target
-rather than at rootfs creation time, use ``pkg_postinst_ontarget()`` or
+rather than at root filesystem creation time, use ``pkg_postinst_ontarget()`` or
call ``postinst_intercept delay_to_first_boot`` from ``pkg_postinst()``.
Any failure of a ``pkg_postinst()`` script (including exit 1) triggers
an error during the :ref:`ref-tasks-rootfs` task.
diff --git a/poky/documentation/migration-guides/migration-3.0.rst b/poky/documentation/migration-guides/migration-3.0.rst
index 9a5f571..610298b 100644
--- a/poky/documentation/migration-guides/migration-3.0.rst
+++ b/poky/documentation/migration-guides/migration-3.0.rst
@@ -47,7 +47,7 @@
- ``core-image-lsb-sdk``: Part of removed LSB support.
- ``cve-check-tool``: Functionally replaced by the ``cve-update-db``
- recipe and ``cve-check`` class.
+ recipe and :ref:`cve-check <ref-classes-cve-check>` class.
- ``eglinfo``: No longer maintained. ``eglinfo`` from ``mesa-demos`` is
an adequate and maintained alternative.
@@ -142,7 +142,7 @@
------------
``cve-check-tool`` has been functionally replaced by a new
-``cve-update-db`` recipe and functionality built into the ``cve-check``
+``cve-update-db`` recipe and functionality built into the :ref:`cve-check <ref-classes-cve-check>`
class. The result uses NVD JSON data feeds rather than the deprecated
XML feeds that ``cve-check-tool`` was using, supports CVSSv3 scoring,
and makes other improvements.
diff --git a/poky/documentation/migration-guides/migration-3.1.rst b/poky/documentation/migration-guides/migration-3.1.rst
index 80b8f6b..cb02967 100644
--- a/poky/documentation/migration-guides/migration-3.1.rst
+++ b/poky/documentation/migration-guides/migration-3.1.rst
@@ -125,7 +125,7 @@
exists but generates a warning and redirects to the new class. In
preparation for a future removal of the old class it is recommended that
you update recipes currently inheriting ``distro_features_check`` to
-inherit ``features_check`` instead.
+inherit :ref:`features_check <ref-classes-features_check>` instead.
.. _migration-3.1-removed-classes:
@@ -241,7 +241,7 @@
does not inherit the new ``mime-xdg`` class
- A recipe installs ``.xml`` files into ``${datadir}/mime/packages``
- but does not inherit the ``mime`` class
+ but does not inherit the :ref:`mime <ref-classes-mime>` class
.. _migration-3.1-x86-live-wic:
diff --git a/poky/documentation/migration-guides/migration-3.2.rst b/poky/documentation/migration-guides/migration-3.2.rst
index a940f23..d593eff 100644
--- a/poky/documentation/migration-guides/migration-3.2.rst
+++ b/poky/documentation/migration-guides/migration-3.2.rst
@@ -209,7 +209,7 @@
``do_deploy`` as implemented in the :ref:`deploy <ref-classes-deploy>` class now cleans up ${:term:`DEPLOYDIR`} before running, just as ``do_install`` cleans up ${:term:`D`} before running. This reduces the risk of :term:`DEPLOYDIR` being accidentally contaminated by files from previous runs, possibly even with different config, in case of incremental builds.
-Most recipes and classes that inherit the ``deploy`` class or interact with ``do_deploy`` are unlikely to be affected by this unless they add ``prefuncs`` to ``do_deploy`` *which also* put files into ``${DEPLOYDIR}`` - these should be refactored to use ``do_deploy_prepend`` instead.
+Most recipes and classes that inherit the :ref:`deploy <ref-classes-deploy>` class or interact with ``do_deploy`` are unlikely to be affected by this unless they add ``prefuncs`` to ``do_deploy`` *which also* put files into ``${DEPLOYDIR}`` - these should be refactored to use ``do_deploy_prepend`` instead.
.. _migration-3.2-nativesdk-sdk-provides-dummy:
diff --git a/poky/documentation/migration-guides/migration-3.3.rst b/poky/documentation/migration-guides/migration-3.3.rst
index 28857e8..f982b1c 100644
--- a/poky/documentation/migration-guides/migration-3.3.rst
+++ b/poky/documentation/migration-guides/migration-3.3.rst
@@ -64,7 +64,7 @@
A new :ref:`python3targetconfig <ref-classes-python3targetconfig>` class has been
created for situations where you would previously have inherited the
-``python3native`` class but need access to target configuration data (such as
+:ref:`python3native <ref-classes-python3native>` class but need access to target configuration data (such as
correct installation directories). Recipes where this situation applies should
be changed to inherit ``python3targetconfig`` instead of ``python3native``. This
also adds a dependency on target ``python3``, so it should only be used where
@@ -89,7 +89,7 @@
S = "${WORKDIR}/git/python/pythonmodule"
then in ``setup.py`` it works with source code in a relative fashion, such
-as ``../../src``. This causes pseudo to abort as it isn't able to track
+as ``../../src``. This causes pseudo to fail as it isn't able to track
the paths properly. This release introduces a new :term:`DISTUTILS_SETUP_PATH`
variable so that recipes can specify it explicitly, for example::
diff --git a/poky/documentation/migration-guides/migration-3.5.rst b/poky/documentation/migration-guides/migration-3.5.rst
new file mode 100644
index 0000000..bd807eb
--- /dev/null
+++ b/poky/documentation/migration-guides/migration-3.5.rst
@@ -0,0 +1,44 @@
+Release 3.5 (kirkstone)
+=======================
+
+This section provides migration information for moving to the Yocto
+Project 3.5 Release (codename "kirkstone") from the prior release.
+
+Recipe changes
+--------------
+
+- Because of the uncertainty in future default branch names in git repositories,
+ it is now required to add a branch name to all URLs described
+ by ``git://`` and ``gitsm://`` :term:`SRC_URI` entries. For example::
+
+ SRC_URI = "git://git.denx.de/u-boot.git;branch=master"
+
+ A :oe_git:`convert-srcuri </openembedded-core/tree/scripts/contrib/convert-srcuri.py>`
+ script to convert your recipes is available in :term:`OpenEmbedded-Core (OE-Core)`
+ and in :term:`Poky`.
+
+- Because of `GitHub dropping support for the git:
+ protocol <https://github.blog/2021-09-01-improving-git-protocol-security-github/>`__,
+ recipes now need to use ``;protocol=https`` at the end of GitHub
+ URLs. The same script as above can be used to convert the recipes.
+
+- The :term:`TOPDIR` variable and the current working directory are no longer modified
+ when parsing recipes. Any code depending on that behaviour will no longer work.
+
+- The ``append``, ``prepend`` and ``remove`` operators can now only be combined with
+ ``=`` and ``:=`` operators. To the exception of the ``append`` plus ``+=`` and
+ ``prepend`` plus ``=+`` combinations, all combinations could be factored up to the
+ ``append``, ``prepend`` or ``remove`` in the combination. This brought a lot of
+ confusion on how the override style syntax operators work and should be used.
+ Therefore, those combinations can simply be replaced by a single ``append``,
+ ``prepend`` or ``remove`` operator without any additional change.
+ For the ``append`` plus ``+=`` (and ``prepend`` plus ``=+``) combinations,
+ the content should be prefixed (respectively suffixed) by a space to maintain
+ the same behavior. You can learn more about override style syntax operators
+ (``append``, ``prepend`` and ``remove``) in the BitBake documentation:
+ :ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:appending and prepending (override style syntax)`
+ and :ref:`bitbake:bitbake-user-manual/bitbake-user-manual-metadata:removal (override style syntax)`.
+
+- :ref:`allarch <ref-classes-allarch>` packagegroups can no longer depend on packages
+ which use :term:`PKG` renaming such as :ref:`debian.bbclass <ref-classes-debian>`.
+
diff --git a/poky/documentation/overview-manual/concepts.rst b/poky/documentation/overview-manual/concepts.rst
index 89a5eb4..5698d93 100644
--- a/poky/documentation/overview-manual/concepts.rst
+++ b/poky/documentation/overview-manual/concepts.rst
@@ -1570,7 +1570,7 @@
scratch is attractive as it means all parts are built fresh and there is
no possibility of stale data that can cause problems. When
developers hit problems, they typically default back to building from
-scratch so they have a know state from the start.
+scratch so they have a known state from the start.
Building an image from scratch is both an advantage and a disadvantage
to the process. As mentioned in the previous paragraph, building from
@@ -1718,7 +1718,7 @@
:term:`Build Directory`. The checksum (or
signature) for a particular task needs to add the hashes of all the
tasks on which the particular task depends. Choosing which dependencies
-to add is a policy decision. However, the effect is to generate a master
+to add is a policy decision. However, the effect is to generate a
checksum that combines the basehash and the hashes of the task's
dependencies.
@@ -1735,12 +1735,8 @@
PRSERV_DUMPDIR PRSERV_DUMPFILE PRSERV_LOCKDOWN PARALLEL_MAKE \\
CCACHE_DIR EXTERNAL_TOOLCHAIN CCACHE CCACHE_DISABLE LICENSE_PATH SDKPKGSUFFIX"
-The
-previous example excludes
-:term:`WORKDIR` since that variable
-is actually constructed as a path within
-:term:`TMPDIR`, which is on the
-whitelist.
+The previous example does not include :term:`WORKDIR` since that variable is
+actually constructed as a path within :term:`TMPDIR`, which is included above.
The rules for deciding which hashes of dependent tasks to include
through dependency chains are more complex and are generally
@@ -1800,7 +1796,7 @@
directory tree such as the sysroot.
The Yocto Project team has tried to keep the details of the
-implementation hidden in ``sstate`` class. From a user's perspective,
+implementation hidden in the :ref:`sstate <ref-classes-sstate>` class. From a user's perspective,
adding shared state wrapping to a task is as simple as this
:ref:`ref-tasks-deploy` example taken
from the :ref:`deploy <ref-classes-deploy>` class::
@@ -1942,6 +1938,138 @@
recipe-based approach, which would have to install the output from every
task.
+Hash Equivalence
+----------------
+
+The above section explained how BitBake skips the execution of tasks
+whose output can already be found in the Shared State cache.
+
+During a build, it may often be the case that the output / result of a task might
+be unchanged despite changes in the task's input values. An example might be
+whitespace changes in some input C code. In project terms, this is what we define
+as "equivalence".
+
+To keep track of such equivalence, BitBake has to manage three hashes
+for each task:
+
+- The *task hash* explained earlier: computed from the recipe metadata,
+ the task code and the task hash values from its dependencies.
+ When changes are made, these task hashes are therefore modified,
+ causing the task to re-execute. The task hashes of tasks depending on this
+ task are therefore modified too, causing the whole dependency
+ chain to re-execute.
+
+- The *output hash*, a new hash computed from the output of Shared State tasks,
+ tasks that save their resulting output to a Shared State tarball.
+ The mapping between the task hash and its output hash is reported
+ to a new *Hash Equivalence* server. This mapping is stored in a database
+ by the server for future reference.
+
+- The *unihash*, a new hash, initially set to the task hash for the task.
+ This is used to track the *unicity* of task output, and we will explain
+ how its value is maintained.
+
+When Hash Equivalence is enabled, BitBake computes the task hash
+for each task by using the unihash of its dependencies, instead
+of their task hash.
+
+Now, imagine that a Shared State task is modified because of a change in
+its code or metadata, or because of a change in its dependencies.
+Since this modifies its task hash, this task will need re-executing.
+Its output hash will therefore be computed again.
+
+Then, the new mapping between the new task hash and its output hash
+will be reported to the Hash Equivalence server. The server will
+let BitBake know whether this output hash is the same as a previously
+reported output hash, for a different task hash.
+
+If the output hash is already known, BitBake will update the task's
+unihash to match the original task hash that generated that output.
+Thanks to this, the depending tasks will keep a previously recorded
+task hash, and BitBake will be able to retrieve their output from
+the Shared State cache, instead of re-executing them. Similarly, the
+output of further downstream tasks can also be retrieved from Shared
+Shate.
+
+If the output hash is unknown, a new entry will be created on the Hash
+Equivalence server, matching the task hash to that output.
+The depending tasks, still having a new task hash because of the
+change, will need to re-execute as expected. The change propagates
+to the depending tasks.
+
+To summarize, when Hash Equivalence is enabled, a change in one of the
+tasks in BitBake's run queue doesn't have to propagate to all the
+downstream tasks that depend on the output of this task, causing a
+full rebuild of such tasks, and so on with the next depending tasks.
+Instead, when the output of this task remains identical to previously
+recorded output, BitBake can safely retrieve all the downstream
+task output from the Shared State cache.
+
+.. note::
+
+ Having :doc:`/test-manual/reproducible-builds` is a key ingredient for
+ the stability of the task's output hash. Therefore, the effectiveness
+ of Hash Equivalence strongly depends on it.
+
+This applies to multiple scenarios:
+
+- A "trivial" change to a recipe that doesn't impact its generated output,
+ such as whitespace changes, modifications to unused code paths or
+ in the ordering of variables.
+
+- Shared library updates, for example to fix a security vulnerability.
+ For sure, the programs using such a library should be rebuilt, but
+ their new binaries should remain identical. The corresponding tasks should
+ have a different output hash because of the change in the hash of their
+ library dependency, but thanks to their output being identical, Hash
+ Equivalence will stop the propagation down the dependency chain.
+
+- Native tool updates. Though the depending tasks should be rebuilt,
+ it's likely that they will generate the same output and be marked
+ as equivalent.
+
+This mechanism is enabled by default in Poky, and is controlled by three
+variables:
+
+- :term:`bitbake:BB_HASHSERVE`, specifying a local or remote Hash
+ Equivalence server to use.
+
+- :term:`BB_HASHSERVE_UPSTREAM`, when ``BB_HASHSERVE = "auto"``,
+ allowing to connect the local server to an upstream one.
+
+- :term:`bitbake:BB_SIGNATURE_HANDLER`, which must be set to ``OEEquivHash``.
+
+Therefore, the default configuration in Poky corresponds to the
+below settings::
+
+ BB_HASHSERVE = "auto"
+ BB_SIGNATURE_HANDLER = "OEEquivHash"
+
+Rather than starting a local server, another possibility is to rely
+on a Hash Equivalence server on a network, by setting::
+
+ BB_HASHSERVE = "<HOSTNAME>:<PORT>"
+
+.. note::
+
+ The shared Hash Equivalence server needs to be maintained together with the
+ Shared State cache. Otherwise, the server could report Shared State hashes
+ that only exist on specific clients.
+
+ We therefore recommend that one Hash Equivalence server be set up to
+ correspond with a given Shared State cache, and to start this server
+ in *read-only mode*, so that it doesn't store equivalences for
+ Shared State caches that are local to clients.
+
+ See the :term:`BB_HASHSERVE` reference for details about starting
+ a Hash Equivalence server.
+
+See the `video <https://www.youtube.com/watch?v=zXEdqGS62Wc>`__
+of Joshua Watt's `Hash Equivalence and Reproducible Builds
+<https://elinux.org/images/3/37/Hash_Equivalence_and_Reproducible_Builds.pdf>`__
+presentation at ELC 2020 for a very synthetic introduction to the
+Hash Equivalence implementation in the Yocto Project.
+
Automatically Added Runtime Dependencies
========================================
diff --git a/poky/documentation/overview-manual/development-environment.rst b/poky/documentation/overview-manual/development-environment.rst
index d719ba6..fc193f3 100644
--- a/poky/documentation/overview-manual/development-environment.rst
+++ b/poky/documentation/overview-manual/development-environment.rst
@@ -163,9 +163,9 @@
- Be sure to always work in matching branches for both the selected
BSP repository and the Source Directory (i.e. ``poky``)
- repository. For example, if you have checked out the "master"
+ repository. For example, if you have checked out the "&DISTRO_NAME_NO_CAP;"
branch of ``poky`` and you are going to use ``meta-intel``, be
- sure to checkout the "master" branch of ``meta-intel``.
+ sure to checkout the "&DISTRO_NAME_NO_CAP;" branch of ``meta-intel``.
In summary, here is where you can get the project files needed for
development:
@@ -233,8 +233,8 @@
open source projects do so.
For the Yocto Project, a key individual called the "maintainer" is
-responsible for the integrity of the "master" branch of a given Git
-repository. The "master" branch is the "upstream" repository from which
+responsible for the integrity of the development branch of a given Git
+repository. The development branch is the "upstream" repository from which
final or most recent builds of a project occur. The maintainer is
responsible for accepting changes from other developers and for
organizing the underlying branch structure to reflect release strategies
@@ -279,8 +279,8 @@
":ref:`dev-manual/common-tasks:submitting a change to the yocto project`"
section in the Yocto Project Development Tasks Manual.
-In summary, there is a single point of entry for changes into a "master"
-or development branch of the Git repository, which is controlled by the
+In summary, there is a single point of entry for changes into the
+development branch of the Git repository, which is controlled by the
project's maintainer. A set of developers independently
develop, test, and submit changes to "contrib" areas for the maintainer
to examine. The maintainer then chooses which changes are going to
@@ -311,7 +311,7 @@
host. You can name these branches anything you like. It is helpful to
give them names associated with the particular feature or change on
which you are working. Once you are done with a feature or change and
- have merged it into your local master branch, simply discard the
+ have merged it into your local development branch, simply discard the
temporary branch.
- *Merge Changes:* The ``git merge`` command allows you to take the
@@ -348,7 +348,7 @@
- *Patch Workflow:* This workflow allows you to notify the maintainer
through an email that you have a change (or patch) you would like
- considered for the "master" branch of the Git repository. To send
+ considered for the development branch of the Git repository. To send
this type of change, you format the patch and then send the email
using the Git commands ``git format-patch`` and ``git send-email``.
For information on how to use these scripts, see the
@@ -433,17 +433,12 @@
following example Git commands::
$ cd ~
- $ git clone git://git.yoctoproject.org/poky
- $ cd poky
- $ git checkout -b &DISTRO_NAME_NO_CAP; origin/&DISTRO_NAME_NO_CAP;
+ $ git clone git://git.yoctoproject.org/poky -b &DISTRO_NAME_NO_CAP;
In the previous example
after moving to the home directory, the ``git clone`` command creates a
-local copy of the upstream ``poky`` Git repository. By default, Git
-checks out the "master" branch for your work. After changing the working
-directory to the new local repository (i.e. ``poky``), the
-``git checkout`` command creates and checks out a local branch named
-"&DISTRO_NAME_NO_CAP;", which tracks the upstream
+local copy of the upstream ``poky`` Git repository and checks out a
+local branch named "&DISTRO_NAME_NO_CAP;", which tracks the upstream
"origin/&DISTRO_NAME_NO_CAP;" branch. Changes you make while in this
branch would ultimately affect the upstream "&DISTRO_NAME_NO_CAP;" branch
of the ``poky`` repository.
@@ -558,9 +553,9 @@
- *git pull --rebase:* Retrieves information from an upstream Git
repository and places it in your local Git repository. You use this
command to make sure you are synchronized with the repository from
- which you are basing changes (.e.g. the "master" branch). The
- "--rebase" option ensures that any local commits you have in your
- branch are preserved at the top of your local branch.
+ which you are basing changes (e.g. the "&DISTRO_NAME_NO_CAP;"
+ branch). The "--rebase" option ensures that any local commits you
+ have in your branch are preserved at the top of your local branch.
- *git push repo-name local-branch:upstream-branch:* Sends
all your committed local changes to the upstream Git repository that
@@ -571,13 +566,13 @@
- *git merge:* Combines or adds changes from one local branch of
your repository with another branch. When you create a local Git
- repository, the default branch is named "master". A typical workflow
- is to create a temporary branch that is based off "master" that you
- would use for isolated work. You would make your changes in that
- isolated branch, stage and commit them locally, switch to the
- "master" branch, and then use the ``git merge`` command to apply the
+ repository, the default branch may be named "main". A typical
+ workflow is to create a temporary branch that is based off "main"
+ that you would use for isolated work. You would make your changes in
+ that isolated branch, stage and commit them locally, switch to the
+ "main" branch, and then use the ``git merge`` command to apply the
changes from your isolated branch into the currently checked out
- branch (e.g. "master"). After the merge is complete and if you are
+ branch (e.g. "main"). After the merge is complete and if you are
done with working in that isolated branch, you can safely delete the
isolated branch.
diff --git a/poky/documentation/overview-manual/yp-intro.rst b/poky/documentation/overview-manual/yp-intro.rst
index 7aee9db..a8ca9e9 100644
--- a/poky/documentation/overview-manual/yp-intro.rst
+++ b/poky/documentation/overview-manual/yp-intro.rst
@@ -371,7 +371,7 @@
- *AutoBuilder:* AutoBuilder is a project that automates build tests
and quality assurance (QA). By using the public AutoBuilder, anyone
- can determine the status of the current "master" branch of Poky.
+ can determine the status of the current development branch of Poky.
.. note::
diff --git a/poky/documentation/poky.yaml b/poky/documentation/poky.yaml
index f2d1e8b..62589ac 100644
--- a/poky/documentation/poky.yaml
+++ b/poky/documentation/poky.yaml
@@ -1,12 +1,12 @@
-DISTRO : "3.4"
+DISTRO : "3.4.1"
DISTRO_NAME_NO_CAP : "honister"
DISTRO_NAME : "Honister"
DISTRO_NAME_NO_CAP_MINUS_ONE : "hardknott"
DISTRO_NAME_NO_CAP_LTS : "dunfell"
-YOCTO_DOC_VERSION : "3.4"
-YOCTO_DOC_VERSION_MINUS_ONE : "3.3.3"
-DISTRO_REL_TAG : "yocto-3.4"
-POKYVERSION : "26.0.0"
+YOCTO_DOC_VERSION : "3.4.1"
+YOCTO_DOC_VERSION_MINUS_ONE : "3.3.4"
+DISTRO_REL_TAG : "yocto-3.4.1"
+POKYVERSION : "26.0.1"
YOCTO_POKY : "poky-&DISTRO_NAME_NO_CAP;-&POKYVERSION;"
YOCTO_DL_URL : "https://downloads.yoctoproject.org"
YOCTO_AB_URL : "https://autobuilder.yoctoproject.org"
@@ -30,7 +30,7 @@
\n\ $ sudo yum makecache
\n\ $ sudo yum install gawk make wget tar bzip2 gzip python3 unzip perl patch \
diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath socat \
- perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue python36-pip xz \
+ perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue python3-pip xz \
which SDL-devel xterm mesa-libGL-devel zstd lz4
\n\ $ sudo pip3 install GitPython jinja2"
CENTOS8_HOST_PACKAGES_ESSENTIAL : "-y epel-release
diff --git a/poky/documentation/profile-manual/usage.rst b/poky/documentation/profile-manual/usage.rst
index 3d28408..56f1e66 100644
--- a/poky/documentation/profile-manual/usage.rst
+++ b/poky/documentation/profile-manual/usage.rst
@@ -2138,7 +2138,7 @@
userspace program. For this example, we'll use the 'hello' test program
generated by the lttng-ust build.
-The 'hello' test program isn't installed on the rootfs by the lttng-ust
+The 'hello' test program isn't installed on the root filesystem by the lttng-ust
build, so we need to copy it over manually. First cd into the build
directory that contains the hello executable::
diff --git a/poky/documentation/ref-manual/classes.rst b/poky/documentation/ref-manual/classes.rst
index 9b1ead6..d9065b3 100644
--- a/poky/documentation/ref-manual/classes.rst
+++ b/poky/documentation/ref-manual/classes.rst
@@ -214,13 +214,13 @@
=====================
The ``blacklist`` class prevents the OpenEmbedded build system from
-building specific recipes (blacklists them). To use this class, inherit
+building specific recipes. To use this class, inherit
the class globally and set :term:`PNBLACKLIST` for
-each recipe you wish to blacklist. Specify the :term:`PN`
+each recipe you wish to ignore. Specify the :term:`PN`
value as a variable flag (varflag) and provide a reason, which is
reported, if the package is requested to be built as the value. For
-example, if you want to blacklist a recipe called "exoticware", you add
-the following to your ``local.conf`` or distribution configuration::
+example, if you want to ignore a recipe called "exoticware", you
+add the following to your ``local.conf`` or distribution configuration::
INHERIT += "blacklist"
PNBLACKLIST[exoticware] = "Not supported by our organization."
@@ -515,6 +515,14 @@
- Extensions that use ``distutils``-based build systems require the
``distutils`` class in their recipes.
+ .. note::
+
+ ``distutils`` has been deprecated in Python 3.10 and will be removed
+ in Python 3.12. For this reason the ``distutils3*`` classes are now
+ deprecated and will be removed from core in the near future. Instead,
+ use the ``setuptools3*`` classes.
+
+
- Extensions that use build systems based on ``setuptools3`` require
the :ref:`setuptools3 <ref-classes-setuptools3>` class in their
recipes.
@@ -570,11 +578,11 @@
.. note::
The user and group operations added using the
- extrausers
+ :ref:`extrausers <ref-classes-extrausers>`
class are not tied to a specific recipe outside of the recipe for the
image. Thus, the operations can be performed across the image as a
whole. Use the
- useradd
+ :ref:`useradd <ref-classes-useradd>`
class to add user and group configuration to a specific recipe.
Here is an example that uses this class in an image recipe::
@@ -845,10 +853,10 @@
icecc.
If you do not want the Icecream distributed compile support to apply to
-specific recipes or classes, you can effectively "blacklist" them by
-listing the recipes and classes using the
+specific recipes or classes, you can ask them to be ignored by Icecream
+by listing the recipes and classes using the
:term:`ICECC_USER_PACKAGE_BL` and
-:term:`ICECC_USER_CLASS_BL`, variables,
+:term:`ICECC_USER_CLASS_BL` variables,
respectively, in your ``local.conf`` file. Doing so causes the
OpenEmbedded build system to handle these compilations locally.
@@ -1362,9 +1370,9 @@
Only a single Initramfs bundle can be added to the FIT image created by
``kernel-fitimage`` and the Initramfs bundle in FIT is optional.
-In case of Initramfs, the kernel is configured to be bundled with the rootfs
+In case of Initramfs, the kernel is configured to be bundled with the root filesystem
in the same binary (example: zImage-initramfs-:term:`MACHINE`.bin).
-When the kernel is copied to RAM and executed, it unpacks the Initramfs rootfs.
+When the kernel is copied to RAM and executed, it unpacks the Initramfs root filesystem.
The Initramfs bundle can be enabled when :term:`INITRAMFS_IMAGE`
is specified and that :term:`INITRAMFS_IMAGE_BUNDLE` is set to 1.
The address where the Initramfs bundle is to be loaded by U-boot is specified
@@ -1712,13 +1720,13 @@
``overlayfs.bbclass``
=======================
-It's often desired in Embedded System design to have a read-only rootfs.
+It's often desired in Embedded System design to have a read-only root filesystem.
But a lot of different applications might want to have read-write access to
some parts of a filesystem. It can be especially useful when your update mechanism
-overwrites the whole rootfs, but you may want your application data to be preserved
+overwrites the whole root filesystem, but you may want your application data to be preserved
between updates. The :ref:`overlayfs <ref-classes-overlayfs>` class provides a way
to achieve that by means of ``overlayfs`` and at the same time keeping the base
-rootfs read-only.
+root filesystem read-only.
To use this class, set a mount point for a partition ``overlayfs`` is going to use as upper
layer in your machine configuration. The underlying file system can be anything that
@@ -1742,7 +1750,8 @@
To support several mount points you can use a different variable flag. Assuming we
want to have a writable location on the file system, but do not need that the data
-survives a reboot, then we could have a ``mnt-overlay.mount`` unit for a ``tmpfs`` file system.
+survives a reboot, then we could have a ``mnt-overlay.mount`` unit for a ``tmpfs``
+file system.
In your machine configuration::
@@ -1752,9 +1761,68 @@
OVERLAYFS_WRITABLE_PATHS[mnt-overlay] = "/usr/share/another-application"
+On a practical note, your application recipe might require multiple
+overlays to be mounted before running to avoid writing to the underlying
+file system (which can be forbidden in case of read-only file system)
+To achieve that :ref:`overlayfs <ref-classes-overlayfs>` provides a ``systemd``
+helper service for mounting overlays. This helper service is named
+``${PN}-overlays.service`` and can be depended on in your application recipe
+(named ``application`` in the following example) ``systemd`` unit by adding
+to the unit the following::
+
+ [Unit]
+ After=application-overlays.service
+ Requires=application-overlays.service
+
.. note::
The class does not support the ``/etc`` directory itself, because ``systemd`` depends on it.
+ In order to get ``/etc`` in overlayfs, see :ref:`overlayfs-etc <ref-classes-overlayfs-etc>`.
+
+.. _ref-classes-overlayfs-etc:
+
+``overlayfs-etc.bbclass``
+=========================
+
+In order to have the ``/etc`` directory in overlayfs a special handling at early
+boot stage is required. The idea is to supply a custom init script that mounts
+``/etc`` before launching the actual init program, because the latter already
+requires ``/etc`` to be mounted.
+
+Example usage in image recipe::
+
+ IMAGE_FEATURES += "overlayfs-etc"
+
+.. note::
+
+ This class must not be inherited directly. Use :term:`IMAGE_FEATURES` or :term:`EXTRA_IMAGE_FEATURES`
+
+Your machine configuration should define at least the device, mount point, and file system type
+you are going to use for ``overlayfs``::
+
+ OVERLAYFS_ETC_MOUNT_POINT = "/data"
+ OVERLAYFS_ETC_DEVICE = "/dev/mmcblk0p2"
+ OVERLAYFS_ETC_FSTYPE ?= "ext4"
+
+To control more mount options you should consider setting mount options
+(``defaults`` is used by default)::
+
+ OVERLAYFS_ETC_MOUNT_OPTIONS = "wsync"
+
+The class provides two options for ``/sbin/init`` generation:
+
+- The default option is to rename the original ``/sbin/init`` to ``/sbin/init.orig``
+ and place the generated init under original name, i.e. ``/sbin/init``. It has an advantage
+ that you won't need to change any kernel parameters in order to make it work,
+ but it poses a restriction that package-management can't be used, because updating
+ the init manager would remove the generated script.
+
+- If you wish to keep original init as is, you can set::
+
+ OVERLAYFS_ETC_USE_ORIG_INIT_NAME = "0"
+
+ Then the generated init will be named ``/sbin/preinit`` and you would need to extend your
+ kernel parameters manually in your bootloader configuration.
.. _ref-classes-own-mirrors:
@@ -2316,6 +2384,17 @@
use build systems based on ``setuptools``. If your recipe uses these
build systems, the recipe needs to inherit the ``setuptools3`` class.
+.. _ref-classes-setuptools3-base:
+
+``setuptools3-base.bbclass``
+============================
+
+The ``setuptools3-base`` class provides a reusable base for other classes
+that support building Python version 3.x extensions. If you need
+functionality that is not provided by the :ref:`setuptools3 <ref-classes-setuptools3>` class, you may
+want to ``inherit setuptools3-base``. Some recipes do not need the tasks
+in the :ref:`setuptools3 <ref-classes-setuptools3>` class and inherit this class instead.
+
.. _ref-classes-sign_rpm:
``sign_rpm.bbclass``
@@ -2796,11 +2875,10 @@
usage by the package on the target. For example, if you have packages
that contain system services that should be run under their own user or
group, you can use these classes to enable creation of the user or
-group. The ``meta-skeleton/recipes-skeleton/useradd/useradd-example.bb``
+group. The :oe_git:`meta-skeleton/recipes-skeleton/useradd/useradd-example.bb
+</openembedded-core/tree/meta-skeleton/recipes-skeleton/useradd/useradd-example.bb>`
recipe in the :term:`Source Directory` provides a simple
example that shows how to add three users and groups to two packages.
-See the ``useradd-example.bb`` recipe for more information on how to use
-these classes.
The ``useradd_base`` class provides basic functionality for user or
groups settings.
diff --git a/poky/documentation/ref-manual/faq.rst b/poky/documentation/ref-manual/faq.rst
index 6f2970d..e06dfd9 100644
--- a/poky/documentation/ref-manual/faq.rst
+++ b/poky/documentation/ref-manual/faq.rst
@@ -302,10 +302,10 @@
``local.conf`` configuration file::
PREMIRRORS:prepend = "\
- git://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- ftp://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- http://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- https://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n"
+ git://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ ftp://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ http://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ https://.*/.* &YOCTO_DL_URL;/mirror/sources/"
These changes cause the build system to intercept Git, FTP, HTTP, and
HTTPS requests and direct them to the ``http://`` sources mirror. You
@@ -342,10 +342,10 @@
file as long as the :term:`PREMIRRORS` server is current::
PREMIRRORS:prepend = "\
- git://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- ftp://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- http://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- https://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n"
+ git://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ ftp://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ http://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ https://.*/.* &YOCTO_DL_URL;/mirror/sources/"
BB_FETCH_PREMIRRORONLY = "1"
These changes would cause the build system to successfully fetch source
diff --git a/poky/documentation/ref-manual/features.rst b/poky/documentation/ref-manual/features.rst
index ded6532..f7abb41 100644
--- a/poky/documentation/ref-manual/features.rst
+++ b/poky/documentation/ref-manual/features.rst
@@ -219,6 +219,10 @@
- *empty-root-password:* Sets the root password to an empty string,
which allows logins with a blank password.
+- *overlayfs-etc:* Configures the ``/etc`` directory to be in ``overlayfs``.
+ This allows to store device specific information elsewhere, especially
+ if the root filesystem is configured to be read-only.
+
- *package-management:* Installs package management tools and preserves
the package manager database.
diff --git a/poky/documentation/ref-manual/images.rst b/poky/documentation/ref-manual/images.rst
index c6a7239..0e3351b 100644
--- a/poky/documentation/ref-manual/images.rst
+++ b/poky/documentation/ref-manual/images.rst
@@ -112,7 +112,7 @@
development headers and libraries to form a complete standalone SDK
and is suitable for development using the target.
-- ``core-image-testmaster``: A "master" image designed to be used for
+- ``core-image-testmaster``: A "controller" image designed to be used for
automated runtime testing. Provides a "known good" image that is
deployed to a separate partition so that you can boot into it and use
it to deploy a second image to be tested. You can find more
diff --git a/poky/documentation/ref-manual/kickstart.rst b/poky/documentation/ref-manual/kickstart.rst
index cac9f2f..885c721 100644
--- a/poky/documentation/ref-manual/kickstart.rst
+++ b/poky/documentation/ref-manual/kickstart.rst
@@ -54,8 +54,9 @@
.. note::
The mount program must understand the PARTUUID syntax you use with
- ``--use-uuid`` and non-root *mountpoint*, including swap. The BusyBox
- versions of these application are currently excluded.
+ ``--use-uuid`` and non-root *mountpoint*, including swap. The default
+ configuration of BusyBox in OpenEmbedded supports this, but this may
+ be disabled in custom configurations.
Here is an example that uses "/" as the mountpoint. The command uses
``--ondisk`` to force the partition onto the ``sdb`` disk::
@@ -86,7 +87,7 @@
If you use ``--source rootfs``, Wic creates a partition as large as
needed and fills it with the contents of the root filesystem pointed
- to by the ``-r`` command-line option or the equivalent rootfs derived
+ to by the ``-r`` command-line option or the equivalent root filesystem derived
from the ``-e`` command-line option. The filesystem type used to
create the partition is driven by the value of the ``--fstype``
option specified for the partition. See the entry on ``--fstype``
@@ -95,7 +96,7 @@
If you use ``--source plugin-name``, Wic creates a partition as large
as needed and fills it with the contents of the partition that is
generated by the specified plugin name using the data pointed to by
- the ``-r`` command-line option or the equivalent rootfs derived from
+ the ``-r`` command-line option or the equivalent root filesystem derived from
the ``-e`` command-line option. Exactly what those contents are and
filesystem type used are dependent on the given plugin
implementation.
diff --git a/poky/documentation/ref-manual/qa-checks.rst b/poky/documentation/ref-manual/qa-checks.rst
index 792c099..3364311 100644
--- a/poky/documentation/ref-manual/qa-checks.rst
+++ b/poky/documentation/ref-manual/qa-checks.rst
@@ -28,7 +28,7 @@
.. note::
- At the end of each message, the name of the associated QA test (as
- listed in the ":ref:`insane.bbclass <ref-classes-insane>`"
+ listed in the ":ref:`ref-classes-insane`"
section) appears within square brackets.
- As mentioned, this list of error and warning messages is for QA
@@ -749,7 +749,7 @@
variables, respectively. You can also disable checks within a particular
recipe using :term:`INSANE_SKIP`. For information on
how to work with the QA checks, see the
-":ref:`insane.bbclass <ref-classes-insane>`" section.
+":ref:`ref-classes-insane`" section.
.. note::
diff --git a/poky/documentation/ref-manual/structure.rst b/poky/documentation/ref-manual/structure.rst
index 5f00edb..5d2e3a8 100644
--- a/poky/documentation/ref-manual/structure.rst
+++ b/poky/documentation/ref-manual/structure.rst
@@ -231,7 +231,7 @@
-----------------------
The OpenEmbedded build system creates this directory when you enable
-build history via the ``buildhistory`` class file. The directory
+build history via the :ref:`buildhistory <ref-classes-buildhistory>` class file. The directory
organizes build information into image, packages, and SDK
subdirectories. For information on the build history feature, see the
":ref:`dev-manual/common-tasks:maintaining build output quality`"
diff --git a/poky/documentation/ref-manual/system-requirements.rst b/poky/documentation/ref-manual/system-requirements.rst
index d12e8df..d7b7cec 100644
--- a/poky/documentation/ref-manual/system-requirements.rst
+++ b/poky/documentation/ref-manual/system-requirements.rst
@@ -37,17 +37,13 @@
Currently, the Yocto Project is supported on the following
distributions:
-- Ubuntu 16.04 (LTS)
-
- Ubuntu 18.04 (LTS)
- Ubuntu 20.04 (LTS)
-- Fedora 30
+- Fedora 33
-- Fedora 31
-
-- Fedora 32
+- Fedora 34
- CentOS 7.x
@@ -59,8 +55,11 @@
- Debian GNU/Linux 10.x (Buster)
-- openSUSE Leap 15.1
+- Debian GNU/Linux 11.x (Bullseye)
+- OpenSUSE Leap 15.1
+
+- OpenSUSE Leap 15.2
.. note::
diff --git a/poky/documentation/ref-manual/tasks.rst b/poky/documentation/ref-manual/tasks.rst
index 299969d..b51462b 100644
--- a/poky/documentation/ref-manual/tasks.rst
+++ b/poky/documentation/ref-manual/tasks.rst
@@ -80,7 +80,7 @@
Recipes implementing this task should inherit the
:ref:`deploy <ref-classes-deploy>` class and should write the output
to ``${``\ :term:`DEPLOYDIR`\ ``}``, which is not to be
-confused with ``${DEPLOY_DIR}``. The ``deploy`` class sets up
+confused with ``${DEPLOY_DIR}``. The :ref:`deploy <ref-classes-deploy>` class sets up
``do_deploy`` as a shared state (sstate) task that can be accelerated
through sstate use. The sstate mechanism takes care of copying the
output from ``${DEPLOYDIR}`` to ``${DEPLOY_DIR_IMAGE}``.
@@ -102,7 +102,7 @@
.. note::
You do not need to add ``before do_build`` to the ``addtask`` command
- (though it is harmless), because the ``base`` class contains the following::
+ (though it is harmless), because the :ref:`base <ref-classes-base>` class contains the following::
do_build[recrdeptask] += "do_deploy"
@@ -326,21 +326,19 @@
file://file;apply=yes \
"
-Conversely, if you have a directory full of patch files and you want to
-exclude some so that the ``do_patch`` task does not apply them during
-the patch phase, you can use the "apply=no" parameter with the
+Conversely, if you have a file whose file type is ``.patch`` or ``.diff``
+and you want to exclude it so that the ``do_patch`` task does not apply
+it during the patch phase, you can use the "apply=no" parameter with the
:term:`SRC_URI` statement::
SRC_URI = " \
git://path_to_repo/some_package \
- file://path_to_lots_of_patch_files \
- file://path_to_lots_of_patch_files/patch_file5;apply=no \
+ file://file1.patch \
+ file://file2.patch;apply=no \
"
-In the
-previous example, assuming all the files in the directory holding the
-patch files end with either ``.patch`` or ``.diff``, every file would be
-applied as a patch by default except for the ``patch_file5`` patch.
+In the previous example ``file1.patch`` would be applied as a patch by default
+while ``file2.patch`` would not be applied.
You can find out more about the patching process in the
":ref:`overview-manual/concepts:patching`" section in
@@ -417,7 +415,7 @@
Removes work files after the OpenEmbedded build system has finished with
them. You can learn more by looking at the
-":ref:`rm_work.bbclass <ref-classes-rm-work>`" section.
+":ref:`ref-classes-rm-work`" section.
.. _ref-tasks-unpack:
diff --git a/poky/documentation/ref-manual/terms.rst b/poky/documentation/ref-manual/terms.rst
index eccae91..09e0a98 100644
--- a/poky/documentation/ref-manual/terms.rst
+++ b/poky/documentation/ref-manual/terms.rst
@@ -134,10 +134,27 @@
the Texas Instruments ARM Cortex-A8 development board).
:term:`Container Layer`
- Layers that hold other layers. An example of a container layer is
- OpenEmbedded's `meta-openembedded
- <https://github.com/openembedded/meta-openembedded>`_ layer. The
- ``meta-openembedded`` layer contains many ``meta-*`` layers.
+ A flexible definition that typically refers to a single Git checkout
+ which contains multiple (and typically related) sub-layers which can
+ be included independently in your project's ``bblayers.conf`` file.
+
+ In some cases, such as with OpenEmbedded's
+ `meta-openembedded <https://github.com/openembedded/meta-openembedded>`_
+ layer, the top level ``meta-openembedded/`` directory is not itself an actual layer,
+ so you would never explicitly include it in a ``bblayers.conf`` file;
+ rather, you would include any number of its layer subdirectories, such as
+ `meta-openembedded/meta-oe <https://github.com/openembedded/meta-openembedded/tree/master/meta-oe>`_,
+ `meta-openembedded/meta-python <https://github.com/openembedded/meta-openembedded/tree/master/meta-python>`_
+ and so on.
+
+ On the other hand, some container layers (such as
+ `meta-security <https://git.yoctoproject.org/cgit/cgit.cgi/meta-security>`_)
+ have a top-level directory that is itself an actual layer, as well as
+ a variety of sub-layers, both of which could be included in your
+ ``bblayers.conf`` file.
+
+ In either case, the phrase "container layer" is simply used to describe
+ a directory structure which contains multiple valid OpenEmbedded layers.
:term:`Cross-Development Toolchain`
In general, a cross-development toolchain is a collection of software
@@ -387,7 +404,7 @@
:term:`Upstream`
A reference to source code or repositories that are not
- local to the development system but located in a master area that is
+ local to the development system but located in a remote area that is
controlled by the maintainer of the source code. For example, in
order for a developer to work on a particular piece of code, they
need to first get a copy of it from an "upstream" source.
diff --git a/poky/documentation/ref-manual/variables.rst b/poky/documentation/ref-manual/variables.rst
index b9e9771..b062116 100644
--- a/poky/documentation/ref-manual/variables.rst
+++ b/poky/documentation/ref-manual/variables.rst
@@ -56,7 +56,7 @@
ALTERNATIVE:busybox = "sh sed test bracket"
For more information on the alternatives system, see the
- ":ref:`update-alternatives.bbclass <ref-classes-update-alternatives>`"
+ ":ref:`ref-classes-update-alternatives`"
section.
:term:`ALTERNATIVE_LINK_NAME`
@@ -76,7 +76,7 @@
If :term:`ALTERNATIVE_LINK_NAME` is not defined, it defaults to ``${bindir}/name``.
For more information on the alternatives system, see the
- ":ref:`update-alternatives.bbclass <ref-classes-update-alternatives>`"
+ ":ref:`ref-classes-update-alternatives`"
section.
:term:`ALTERNATIVE_PRIORITY`
@@ -92,7 +92,7 @@
ALTERNATIVE_PRIORITY_pkg[name] = "priority"
For more information on the alternatives system, see the
- ":ref:`update-alternatives.bbclass <ref-classes-update-alternatives>`"
+ ":ref:`ref-classes-update-alternatives`"
section.
:term:`ALTERNATIVE_TARGET`
@@ -122,8 +122,7 @@
task while retaining support for the command if necessary.
For more information on the alternatives system, see the
- ":ref:`update-alternatives.bbclass <ref-classes-update-alternatives>`"
- section.
+ ":ref:`ref-classes-update-alternatives`" section.
:term:`ANY_OF_DISTRO_FEATURES`
When inheriting the
@@ -400,7 +399,7 @@
where:
action is:
- ABORT: Immediately abort the build when
+ ABORT: Immediately stop the build when
a threshold is broken.
STOPTASKS: Stop the build after the currently
executing tasks have finished when
@@ -438,7 +437,7 @@
The first example works only if you also provide the
:term:`BB_DISKMON_WARNINTERVAL`
variable in the ``conf/local.conf``. This example causes the build
- system to immediately abort when either the disk space in
+ system to immediately stop when either the disk space in
``${TMPDIR}`` drops below 1 Gbyte or the available free inodes drops
below 100 Kbytes. Because two directories are provided with the
variable, the build system also issue a warning when the disk space
@@ -452,7 +451,7 @@
directory drops below 1 Gbyte. No disk monitoring occurs for the free
inodes in this case.
- The final example immediately aborts the build when the number of
+ The final example immediately stops the build when the number of
free inodes in the ``${TMPDIR}`` directory drops below 100 Kbytes. No
disk space monitoring for the directory itself occurs in this case.
@@ -641,8 +640,10 @@
introduce a hard dependency on those other layers.
Use the following form for :term:`BBFILES_DYNAMIC`:
- collection_name:filename_pattern The following example identifies two
- collection names and two filename patterns::
+ ``collection_name:filename_pattern``.
+
+ The following example identifies two collection names and two
+ filename patterns::
BBFILES_DYNAMIC += " \
clang-layer:${LAYERDIR}/bbappends/meta-clang/*/*/*.bbappend \
@@ -650,7 +651,7 @@
"
This next example shows an error message that occurs because invalid
- entries are found, which cause parsing to abort:
+ entries are found, which cause parsing to fail:
.. code-block:: none
@@ -771,7 +772,7 @@
:ref:`binconfig-disabled <ref-classes-binconfig-disabled>` class,
this variable specifies binary configuration scripts to disable in
favor of using ``pkg-config`` to query the information. The
- ``binconfig-disabled`` class will modify the specified scripts to
+ :ref:`binconfig-disabled <ref-classes-binconfig-disabled>` class will modify the specified scripts to
return an error so that calls to them can be easily found and
replaced.
@@ -801,7 +802,7 @@
``meta/classes/binconfig.bbclass`` in the :term:`Source Directory`.
You can also find general
information on the class in the
- ":ref:`binconfig.bbclass <ref-classes-binconfig>`" section.
+ ":ref:`ref-classes-binconfig`" section.
:term:`BP`
The base recipe name and version but without any special recipe name
@@ -939,13 +940,13 @@
When inheriting the :ref:`buildhistory <ref-classes-buildhistory>`
class, this variable specifies whether or not to commit the build
history output in a local Git repository. If set to "1", this local
- repository will be maintained automatically by the ``buildhistory``
+ repository will be maintained automatically by the :ref:`buildhistory <ref-classes-buildhistory>`
class and a commit will be created on every build for changes to each
top-level subdirectory of the build history output (images, packages,
and sdk). If you want to track changes to build history over time,
you should set this value to "1".
- By default, the ``buildhistory`` class does not commit the build
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class does not commit the build
history output in a local Git repository::
BUILDHISTORY_COMMIT ?= "0"
@@ -962,7 +963,7 @@
email@host". Providing an email address or host that is not valid
does not produce an error.
- By default, the ``buildhistory`` class sets the variable as follows::
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class sets the variable as follows::
BUILDHISTORY_COMMIT_AUTHOR ?= "buildhistory <buildhistory@${DISTRO}>"
@@ -970,9 +971,9 @@
When inheriting the :ref:`buildhistory <ref-classes-buildhistory>`
class, this variable specifies the directory in which build history
information is kept. For more information on how the variable works,
- see the ``buildhistory.class``.
+ see the ``buildhistory.bbclass`` file.
- By default, the ``buildhistory`` class sets the directory as follows::
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class sets the directory as follows::
BUILDHISTORY_DIR ?= "${TOPDIR}/buildhistory"
@@ -999,7 +1000,7 @@
This saves one file per task and lists the SHA-256 checksums for
each file staged (i.e. the output of the task).
- By default, the ``buildhistory`` class enables the following
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class enables the following
features::
BUILDHISTORY_FEATURES ?= "image package sdk"
@@ -1015,7 +1016,7 @@
any file. Specifying an invalid path does not produce an error.
Consequently, you can include files that might not always be present.
- By default, the ``buildhistory`` class provides paths to the
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class provides paths to the
following files::
BUILDHISTORY_IMAGE_FILES ?= "/etc/passwd /etc/group"
@@ -1028,7 +1029,7 @@
useful when build history is populated from multiple sources that may not
all use the same top level directory.
- By default, the ``buildhistory`` class sets the variable as follows::
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class sets the variable as follows::
BUILDHISTORY_PATH_PREFIX_STRIP ?= ""
@@ -1047,7 +1048,7 @@
that you have set up manually using ``git remote`` within the local
repository.
- By default, the ``buildhistory`` class sets the variable as follows::
+ By default, the :ref:`buildhistory <ref-classes-buildhistory>` class sets the variable as follows::
BUILDHISTORY_PUSH_REPO ?= ""
@@ -1321,7 +1322,7 @@
The default value, which is "CLOSED Proprietary", for
:term:`COPYLEFT_LICENSE_EXCLUDE` is set by the
:ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which
- is inherited by the ``archiver`` class.
+ is inherited by the :ref:`archiver <ref-classes-archiver>` class.
:term:`COPYLEFT_LICENSE_INCLUDE`
A space-separated list of licenses to include in the source archived
@@ -1332,7 +1333,7 @@
The default value is set by the
:ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which
- is inherited by the ``archiver`` class. The default value includes
+ is inherited by the :ref:`archiver <ref-classes-archiver>` class. The default value includes
"GPL*", "LGPL*", and "AGPL*".
:term:`COPYLEFT_PN_EXCLUDE`
@@ -1347,7 +1348,7 @@
The default value, which is "" indicating to not explicitly exclude
any recipes by name, for :term:`COPYLEFT_PN_EXCLUDE` is set by the
:ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which
- is inherited by the ``archiver`` class.
+ is inherited by the :ref:`archiver <ref-classes-archiver>` class.
:term:`COPYLEFT_PN_INCLUDE`
A list of recipes to include in the source archived by the
@@ -1361,7 +1362,7 @@
The default value, which is "" indicating to not explicitly include
any recipes by name, for :term:`COPYLEFT_PN_INCLUDE` is set by the
:ref:`copyleft_filter <ref-classes-copyleft_filter>` class, which
- is inherited by the ``archiver`` class.
+ is inherited by the :ref:`archiver <ref-classes-archiver>` class.
:term:`COPYLEFT_RECIPE_TYPES`
A space-separated list of recipe types to include in the source
@@ -1371,7 +1372,7 @@
The default value, which is "target*", for :term:`COPYLEFT_RECIPE_TYPES`
is set by the :ref:`copyleft_filter <ref-classes-copyleft_filter>`
- class, which is inherited by the ``archiver`` class.
+ class, which is inherited by the :ref:`archiver <ref-classes-archiver>` class.
:term:`COPY_LIC_DIRS`
If set to "1" along with the
@@ -1803,11 +1804,11 @@
:term:`DEPLOYDIR`
When inheriting the :ref:`deploy <ref-classes-deploy>` class, the
:term:`DEPLOYDIR` points to a temporary work area for deployed files that
- is set in the ``deploy`` class as follows::
+ is set in the :ref:`deploy <ref-classes-deploy>` class as follows::
DEPLOYDIR = "${WORKDIR}/deploy-${PN}"
- Recipes inheriting the ``deploy`` class should copy files to be
+ Recipes inheriting the :ref:`deploy <ref-classes-deploy>` class should copy files to be
deployed into :term:`DEPLOYDIR`, and the class will take care of copying
them into :term:`DEPLOY_DIR_IMAGE`
afterwards.
@@ -1850,7 +1851,7 @@
:term:`DISTRO_EXTRA_RDEPENDS`
Specifies a list of distro-specific packages to add to all images.
- This variable takes affect through ``packagegroup-base`` so the
+ This variable takes effect through ``packagegroup-base`` so the
variable only really applies to the more full-featured images that
include ``packagegroup-base``. You can use this variable to keep
distro policy out of generic images. As with all other distro
@@ -1983,8 +1984,7 @@
:term:`DISTUTILS_SETUP_PATH`
When used by recipes that inherit the
- :ref:`distutils3 <ref-classes-distutils3>` or
- :ref:`setuptools3 <ref-classes-setuptools3>` class, this variable should
+ :ref:`distutils3 <ref-classes-distutils3>` class, this variable should
be used to specify the directory in which the ``setup.py`` file is
located if it is not at the root of the source tree (as specified by
:term:`S`). For example, in a recipe where the sources are fetched from
@@ -1994,6 +1994,13 @@
S = "${WORKDIR}/git"
DISTUTILS_SETUP_PATH = "${S}/python/pythonmodule"
+ .. note::
+
+ ``distutils`` has been deprecated in Python 3.10 and will be removed
+ in Python 3.12. For this reason, the use of :ref:`distutils3 <ref-classes-distutils3>`
+ is deprecated. Instead use :ref:`setuptools3 <ref-classes-setuptools3>` and the
+ :term:`SETUPTOOLS_SETUP_PATH` variable.
+
:term:`DL_DIR`
The central download directory used by the build process to store
downloads. By default, :term:`DL_DIR` gets files suitable for mirroring
@@ -2077,7 +2084,7 @@
errors by the OpenEmbedded build system. You set this variable in
your distribution configuration file. For a list of the checks you
can control with this variable, see the
- ":ref:`insane.bbclass <ref-classes-insane>`" section.
+ ":ref:`ref-classes-insane`" section.
:term:`EXCLUDE_FROM_SHLIBS`
Triggers the OpenEmbedded build system's shared libraries resolver to
@@ -2156,7 +2163,7 @@
system uses to locate unpacked recipe source code.
For more information on ``externalsrc.bbclass``, see the
- ":ref:`externalsrc.bbclass <ref-classes-externalsrc>`" section. You
+ ":ref:`ref-classes-externalsrc`" section. You
can also find information on how to use this variable in the
":ref:`dev-manual/common-tasks:building software from an external source`"
section in the Yocto Project Development Tasks Manual.
@@ -2170,7 +2177,7 @@
Directory.
For more information on ``externalsrc.bbclass``, see the
- ":ref:`externalsrc.bbclass <ref-classes-externalsrc>`" section. You
+ ":ref:`ref-classes-externalsrc`" section. You
can also find information on how to use this variable in the
":ref:`dev-manual/common-tasks:building software from an external source`"
section in the Yocto Project Development Tasks Manual.
@@ -2291,7 +2298,7 @@
group configurations to a specific recipe.
The set list of commands you can configure using the
- :term:`EXTRA_USERS_PARAMS` is shown in the ``extrausers`` class. These
+ :term:`EXTRA_USERS_PARAMS` is shown in the :ref:`extrausers <ref-classes-extrausers>` class. These
commands map to the normal Unix commands of the same names::
# EXTRA_USERS_PARAMS = "\
@@ -2626,7 +2633,7 @@
:term:`FONT_PACKAGES`
When inheriting the :ref:`fontcache <ref-classes-fontcache>` class,
this variable identifies packages containing font files that need to
- be cached by Fontconfig. By default, the ``fontcache`` class assumes
+ be cached by Fontconfig. By default, the :ref:`fontcache <ref-classes-fontcache>` class assumes
that fonts are in the recipe's main package (i.e.
``${``\ :term:`PN`\ ``}``). Use this variable if fonts you
need are in a package other than that main package.
@@ -2665,6 +2672,13 @@
:term:`GDB`
The minimal command and arguments to run the GNU Debugger.
+ :term:`GIR_EXTRA_LIBS_PATH`
+ Allows to specify an extra search path for ``.so`` files
+ in GLib related recipes using GObject introspection,
+ and which do not compile without this setting.
+ See the ":ref:`dev-manual/common-tasks:enabling gobject introspection support`"
+ section for details.
+
:term:`GITDIR`
The directory in which a local copy of a Git repository is stored
when it is cloned.
@@ -2834,7 +2848,7 @@
:term:`ICECC_DISABLED`
Disables or enables the ``icecc`` (Icecream) function. For more
information on this function and best practices for using this
- variable, see the ":ref:`icecc.bbclass <ref-classes-icecc>`"
+ variable, see the ":ref:`ref-classes-icecc`"
section.
Setting this variable to "1" in your ``local.conf`` disables the
@@ -2892,9 +2906,9 @@
:ref:`icecc <ref-classes-icecc>` class. You set this variable in
your ``local.conf`` file.
- When you list classes using this variable, you are "blacklisting"
- them from distributed compilation across remote hosts. Any classes
- you list will be distributed and compiled locally.
+ When you list classes using this variable, the recipes inheriting
+ those classes will not benefit from distributed compilation across
+ remote hosts. Instead they will be built locally.
:term:`ICECC_USER_PACKAGE_BL`
Identifies user recipes that you do not want the Icecream distributed
@@ -2902,9 +2916,9 @@
:ref:`icecc <ref-classes-icecc>` class. You set this variable in
your ``local.conf`` file.
- When you list packages using this variable, you are "blacklisting"
- them from distributed compilation across remote hosts. Any packages
- you list will be distributed and compiled locally.
+ When you list recipes using this variable, you are excluding them
+ from distributed compilation across remote hosts. Instead they will
+ be built locally.
:term:`ICECC_USER_PACKAGE_WL`
Identifies user recipes that use an empty
@@ -3731,7 +3745,7 @@
INSANE_SKIP:${PN} += "dev-so"
- See the ":ref:`insane.bbclass <ref-classes-insane>`" section for a
+ See the ":ref:`ref-classes-insane`" section for a
list of the valid QA checks you can specify using this variable.
:term:`INSTALL_TIMEZONE_FILE`
@@ -3888,7 +3902,7 @@
typically append this variable to enable extended image types. An
example is the "kernel-fitimage", which enables fitImage support and
resides in ``meta/classes/kernel-fitimage.bbclass``. You can register
- custom kernel image types with the ``kernel`` class using this
+ custom kernel image types with the :ref:`kernel <ref-classes-kernel>` class using this
variable.
:term:`KERNEL_DEVICETREE`
@@ -4116,7 +4130,7 @@
:term:`KERNEL_VERSION`
Specifies the version of the kernel as extracted from ``version.h``
or ``utsrelease.h`` within the kernel sources. Effects of setting
- this variable do not take affect until the kernel has been
+ this variable do not take effect until the kernel has been
configured. Consequently, attempting to refer to this variable in
contexts prior to configuration will not work.
@@ -4283,7 +4297,7 @@
that the :ref:`debian <ref-classes-debian>` class applies its
naming policy to given a recipe that packages multiple libraries.
- This variable works in conjunction with the ``debian`` class.
+ This variable works in conjunction with the :ref:`debian <ref-classes-debian>` class.
:term:`LIC_FILES_CHKSUM`
Checksums of the license text in the recipe source code.
@@ -4364,9 +4378,9 @@
section in the Yocto Project Development Tasks Manual.
:term:`LICENSE_FLAGS`
- Specifies additional flags for a recipe you must whitelist through
+ Specifies additional flags for a recipe you must allow through
:term:`LICENSE_FLAGS_WHITELIST` in
- order to allow the recipe to be built. When providing multiple flags,
+ order for the recipe to be built. When providing multiple flags,
separate them with spaces.
This value is independent of :term:`LICENSE` and is
@@ -4379,8 +4393,7 @@
:term:`LICENSE_FLAGS_WHITELIST`
Lists license flags that when specified in
:term:`LICENSE_FLAGS` within a recipe should not
- prevent that recipe from being built. This practice is otherwise
- known as "whitelisting" license flags. For more information, see the
+ prevent that recipe from being built. For more information, see the
":ref:`dev-manual/common-tasks:enabling commercially licensed recipes`"
section in the Yocto Project Development Tasks Manual.
@@ -4733,7 +4746,7 @@
configuration file, a distribution configuration file, an append file
for the recipe, or the recipe itself). If you use this variable, you
must also be sure to list the module name in the
- :term:`KERNEL_MODULE_AUTOLOAD`
+ :term:`KERNEL_MODULE_PROBECONF`
variable.
Here is the general syntax::
@@ -4908,9 +4921,7 @@
See the ``meta/classes/binconfig.bbclass`` in the
:term:`Source Directory` for details on how this class
- applies these additional sed command arguments. For general
- information on the ``binconfig`` class, see the
- ":ref:`binconfig.bbclass <ref-classes-binconfig>`" section.
+ applies these additional sed command arguments.
:term:`OE_IMPORTS`
An internal variable used to tell the OpenEmbedded build system what
@@ -5084,7 +5095,7 @@
For information on packaging and build performance effects as a
result of the package manager in use, see the
- ":ref:`package.bbclass <ref-classes-package>`" section.
+ ":ref:`ref-classes-package`" section.
:term:`PACKAGE_DEBUG_SPLIT_STYLE`
Determines how to split up and package debug and source information
@@ -5186,8 +5197,8 @@
.. note::
You can use the :term:`PACKAGE_FEED_ARCHS`
- variable to whitelist specific package architectures. If you do
- not need to whitelist specific architectures, which is a common
+ variable to allow specific package architectures. If you do
+ not need to allow specific architectures, which is a common
case, you can omit this variable. Omitting the variable results in
all available architectures for the current machine being included
into remote package feeds.
@@ -5303,7 +5314,7 @@
:term:`PACKAGE_WRITE_DEPS`
Specifies a list of dependencies for post-installation and
pre-installation scripts on native/cross tools. If your
- post-installation or pre-installation script can execute at rootfs
+ post-installation or pre-installation script can execute at root filesystem
creation time rather than on the target but depends on a native tool
in order to execute, you need to list the tools in
:term:`PACKAGE_WRITE_DEPS`.
@@ -5855,10 +5866,10 @@
:term:`Build Directory`::
PREMIRRORS:prepend = "\
- git://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- ftp://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- http://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n \
- https://.*/.* &YOCTO_DL_URL;/mirror/sources/ \n"
+ git://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ ftp://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ http://.*/.* &YOCTO_DL_URL;/mirror/sources/ \
+ https://.*/.* &YOCTO_DL_URL;/mirror/sources/"
These changes cause the
build system to intercept Git, FTP, HTTP, and HTTPS requests and
@@ -6007,7 +6018,7 @@
names used when installing the Python headers and libraries in
sysroot (e.g. ``.../python3.3m/...``).
- Recipes that inherit the ``distutils3`` class during cross-builds also
+ Recipes that inherit the :ref:`distutils3 <ref-classes-distutils3>` class during cross-builds also
use this variable to locate the headers and libraries of the
appropriate Python that the extension is targeting.
@@ -6198,7 +6209,7 @@
:term:`RM_WORK_EXCLUDE`
With ``rm_work`` enabled, this variable specifies a list of recipes
whose work directories should not be removed. See the
- ":ref:`rm_work.bbclass <ref-classes-rm-work>`" section for more
+ ":ref:`ref-classes-rm-work`" section for more
details.
:term:`ROOT_HOME`
@@ -6583,9 +6594,9 @@
:ref:`populate-sdk-ext <ref-classes-populate-sdk-*>` class.
This list overrides the variables specified using the
- :term:`SDK_LOCAL_CONF_BLACKLIST`
- variable as well as any variables identified by automatic
- blacklisting due to the "/" character being found at the start of the
+ :term:`SDK_LOCAL_CONF_BLACKLIST` variable as well as
+ other variables automatically added due to the "/" character
+ being found at the start of the
value, which is usually indicative of being a path and thus might not
be valid on the system where the SDK is installed.
@@ -6756,23 +6767,21 @@
$ bitbake -c populate_sdk imagename
:term:`SDKMACHINE`
- The machine for which the SDK is built. In other words, the SDK is
- built such that it runs on the target you specify with the
- :term:`SDKMACHINE` value. The value points to a corresponding ``.conf``
- file under ``conf/machine-sdk/``.
+ The machine for which the SDK is built. In other words, the SDK is built
+ such that it runs on the target you specify with the :term:`SDKMACHINE`
+ value. The value points to a corresponding ``.conf`` file under
+ ``conf/machine-sdk/`` in the enabled layers, for example ``aarch64``,
+ ``i586``, ``i686``, ``ppc64``, ``ppc64le``, and ``x86_64`` are
+ :oe_git:`available in OpenEmbedded-Core </openembedded-core/tree/meta/conf/machine-sdk>`.
- You can use "i686" and "x86_64" as possible values for this variable.
- The variable defaults to "i686" and is set in the local.conf file in
- the Build Directory.
- ::
-
- SDKMACHINE ?= "i686"
+ The variable defaults to :term:`BUILD_ARCH` so that SDKs are built for the
+ architecture of the build machine.
.. note::
You cannot set the :term:`SDKMACHINE`
variable in your distribution configuration file. If you do, the
- configuration will not take affect.
+ configuration will not take effect.
:term:`SDKPATH`
Defines the path offered to the user for installation of the SDK that
@@ -6837,6 +6846,30 @@
EXTRA_IMAGE_FEATURES += "read-only-rootfs"
+ :term:`SETUPTOOLS_BUILD_ARGS`
+ When used by recipes that inherit the
+ :ref:`setuptools3 <ref-classes-setuptools3>` class, this variable can
+ be used to specify additional arguments to be passed to ``setup.py build``
+ in the ``setuptools3_do_compile()`` task.
+
+ :term:`SETUPTOOLS_INSTALL_ARGS`
+ When used by recipes that inherit the
+ :ref:`setuptools3 <ref-classes-setuptools3>` class, this variable can
+ be used to specify additional arguments to be passed to ``setup.py install``
+ in the ``setuptools3_do_install()`` task.
+
+ :term:`SETUPTOOLS_SETUP_PATH`
+ When used by recipes that inherit the
+ :ref:`setuptools3 <ref-classes-setuptools3>` class, this variable should
+ be used to specify the directory in which the ``setup.py`` file is
+ located if it is not at the root of the source tree (as specified by
+ :term:`S`). For example, in a recipe where the sources are fetched from
+ a Git repository and ``setup.py`` is in a ``python/pythonmodule``
+ subdirectory, you would have this::
+
+ S = "${WORKDIR}/git"
+ SETUPTOOLS_SETUP_PATH = "${S}/python/pythonmodule"
+
:term:`SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS`
A list of recipe dependencies that should not be used to determine
signatures of tasks from one recipe when they depend on tasks from
@@ -7018,91 +7051,13 @@
for additional information.
:term:`SRC_URI`
- The list of source files - local or remote. This variable tells the
- OpenEmbedded build system which bits to pull in for the build and how
- to pull them in. For example, if the recipe or append file only needs
- to fetch a tarball from the Internet, the recipe or append file uses
- a single :term:`SRC_URI` entry. On the other hand, if the recipe or
- append file needs to fetch a tarball, apply two patches, and include
- a custom file, the recipe or append file would include four instances
- of the variable.
- The following list explains the available URI protocols. URI
- protocols are highly dependent on particular BitBake Fetcher
- submodules. Depending on the fetcher BitBake uses, various URL
- parameters are employed. For specifics on the supported Fetchers, see
- the ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-fetching:fetchers`" section in the
- BitBake User Manual.
+ See the BitBake manual for the initial description for this variable:
+ :term:`bitbake:SRC_URI`.
- - ``file://`` - Fetches files, which are usually files shipped
- with the :term:`Metadata`, from the local machine (e.g.
- :ref:`patch <overview-manual/concepts:patching>` files).
- The path is relative to the :term:`FILESPATH`
- variable. Thus, the build system searches, in order, from the
- following directories, which are assumed to be a subdirectories of
- the directory in which the recipe file (``.bb``) or append file
- (``.bbappend``) resides:
+ The following features are added by OpenEmbedded and the Yocto Project.
- - ``${BPN}`` - The base recipe name without any special suffix
- or version numbers.
-
- - ``${BP}`` - ``${BPN}-${PV}``. The base recipe name and
- version but without any special package name suffix.
-
- - *files -* Files within a directory, which is named ``files``
- and is also alongside the recipe or append file.
-
- .. note::
-
- If you want the build system to pick up files specified through
- a
- SRC_URI
- statement from your append file, you need to be sure to extend
- the
- FILESPATH
- variable by also using the
- FILESEXTRAPATHS
- variable from within your append file.
-
- - ``bzr://`` - Fetches files from a Bazaar revision control
- repository.
-
- - ``git://`` - Fetches files from a Git revision control
- repository.
-
- - ``osc://`` - Fetches files from an OSC (openSUSE Build service)
- revision control repository.
-
- - ``repo://`` - Fetches files from a repo (Git) repository.
-
- - ``ccrc://`` - Fetches files from a ClearCase repository.
-
- - ``http://`` - Fetches files from the Internet using ``http``.
-
- - ``https://`` - Fetches files from the Internet using ``https``.
-
- - ``ftp://`` - Fetches files from the Internet using ``ftp``.
-
- - ``cvs://`` - Fetches files from a CVS revision control
- repository.
-
- - ``hg://`` - Fetches files from a Mercurial (``hg``) revision
- control repository.
-
- - ``p4://`` - Fetches files from a Perforce (``p4``) revision
- control repository.
-
- - ``ssh://`` - Fetches files from a secure shell.
-
- - ``svn://`` - Fetches files from a Subversion (``svn``) revision
- control repository.
-
- - ``npm://`` - Fetches JavaScript modules from a registry.
-
- - ``az://`` - Fetches files from an Azure Storage account.
-
- There are standard and recipe-specific options for :term:`SRC_URI`. Here are
- standard ones:
+ There are standard and recipe-specific options. Here are standard ones:
- ``apply`` - Whether to apply the patch or not. The default
action is to apply the patch.
@@ -7135,41 +7090,12 @@
- ``notrev`` - Apply the patch only if :term:`SRCREV` is not equal to
``rev``.
- Here are some additional options worth mentioning:
+ .. note::
- - ``unpack`` - Controls whether or not to unpack the file if it is
- an archive. The default action is to unpack the file.
-
- - ``destsuffix`` - Places the file (or extracts its contents) into
- the specified subdirectory of :term:`WORKDIR` when
- the Git fetcher is used.
-
- - ``subdir`` - Places the file (or extracts its contents) into the
- specified subdirectory of :term:`WORKDIR` when the local (``file://``)
- fetcher is used.
-
- - ``localdir`` - Places the file (or extracts its contents) into
- the specified subdirectory of :term:`WORKDIR` when the CVS fetcher is
- used.
-
- - ``subpath`` - Limits the checkout to a specific subpath of the
- tree when using the Git fetcher is used.
-
- - ``name`` - Specifies a name to be used for association with
- :term:`SRC_URI` checksums or :term:`SRCREV` when you have more than one
- file or git repository specified in :term:`SRC_URI`. For example::
-
- SRC_URI = "git://example.com/foo.git;name=first \
- git://example.com/bar.git;name=second \
- http://example.com/file.tar.gz;name=third"
-
- SRCREV_first = "f1d2d2f924e986ac86fdf7b36c94bcdf32beec15"
- SRCREV_second = "e242ed3bffccdf271b7fbaf34ed72d089537b42f"
- SRC_URI[third.sha256sum] = "13550350a8681c84c861aac2e5b440161c2b33a3e4f302ac680ca5b686de48de"
-
-
- - ``downloadfilename`` - Specifies the filename used when storing
- the downloaded file.
+ If you want the build system to pick up files specified through
+ a :term:`SRC_URI` statement from your append file, you need to be
+ sure to extend the :term:`FILESPATH` variable by also using the
+ :term:`FILESEXTRAPATHS` variable from within your append file.
:term:`SRC_URI_OVERRIDES_PACKAGE_ARCH`
By default, the OpenEmbedded build system automatically detects
@@ -8119,7 +8045,7 @@
on enabling, running, and writing these tests, see the
":ref:`dev-manual/common-tasks:performing automated runtime testing`"
section in the Yocto Project Development Tasks Manual and the
- ":ref:`testimage*.bbclass <ref-classes-testimage*>`" section.
+ ":ref:`ref-classes-testimage*`" section.
:term:`THISDIR`
The directory in which the file BitBake is currently parsing is
@@ -8213,11 +8139,6 @@
information on setting up a cross-development environment, see the
:doc:`/sdk-manual/index` manual.
- :term:`TOPDIR`
- The top-level :term:`Build Directory`. BitBake
- automatically sets this variable when you initialize your build
- environment using :ref:`structure-core-script`.
-
:term:`TRANSLATED_TARGET_ARCH`
A sanitized version of :term:`TARGET_ARCH`. This
variable is used where the architecture is needed in a value where
@@ -8334,40 +8255,6 @@
TUNE_PKGARCH:tune-core2-32 = "core2-32"
- :term:`TUNEABI`
- An underlying Application Binary Interface (ABI) used by a particular
- tuning in a given toolchain layer. Providers that use prebuilt
- libraries can use the :term:`TUNEABI`,
- :term:`TUNEABI_OVERRIDE`, and
- :term:`TUNEABI_WHITELIST` variables to check
- compatibility of tunings against their selection of libraries.
-
- If :term:`TUNEABI` is undefined, then every tuning is allowed. See the
- :ref:`sanity <ref-classes-sanity>` class to see how the variable is
- used.
-
- :term:`TUNEABI_OVERRIDE`
- If set, the OpenEmbedded system ignores the
- :term:`TUNEABI_WHITELIST` variable.
- Providers that use prebuilt libraries can use the
- :term:`TUNEABI_OVERRIDE`, :term:`TUNEABI_WHITELIST`, and
- :term:`TUNEABI` variables to check compatibility of a
- tuning against their selection of libraries.
-
- See the :ref:`sanity <ref-classes-sanity>` class to see how the
- variable is used.
-
- :term:`TUNEABI_WHITELIST`
- A whitelist of permissible :term:`TUNEABI` values. If
- :term:`TUNEABI_WHITELIST` is not set, all tunes are allowed. Providers
- that use prebuilt libraries can use the :term:`TUNEABI_WHITELIST`,
- :term:`TUNEABI_OVERRIDE`, and :term:`TUNEABI`
- variables to check compatibility of a tuning against their selection
- of libraries.
-
- See the :ref:`sanity <ref-classes-sanity>` class to see how the
- variable is used.
-
:term:`TUNECONFLICTS[feature]`
Specifies CPU or Application Binary Interface (ABI) tuning features
that conflict with feature.
@@ -8783,7 +8670,7 @@
warnings by the OpenEmbedded build system. You set this variable in
your distribution configuration file. For a list of the checks you
can control with this variable, see the
- ":ref:`insane.bbclass <ref-classes-insane>`" section.
+ ":ref:`ref-classes-insane`" section.
:term:`WKS_FILE`
Specifies the location of the Wic kickstart file that is used by the
diff --git a/poky/documentation/releases.rst b/poky/documentation/releases.rst
index 529d00e..c2c2232 100644
--- a/poky/documentation/releases.rst
+++ b/poky/documentation/releases.rst
@@ -1,5 +1,12 @@
.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+..
+ NOTE FOR RELEASE MAINTAINERS:
+ This file only needs updating in the development release ("master" branch)
+ When documentation for stable releases is built,
+ the latest version from "master" is used
+ by https://git.yoctoproject.org/yocto-autobuilder-helper/tree/scripts/run-docs-build
+
===========================
Supported Release Manuals
===========================
@@ -9,6 +16,7 @@
******************************
- :yocto_docs:`3.4 Documentation </3.4>`
+- :yocto_docs:`3.4.1 Documentation </3.4.1>`
******************************
Release Series 3.3 (hardknott)
@@ -18,16 +26,7 @@
- :yocto_docs:`3.3.1 Documentation </3.3.1>`
- :yocto_docs:`3.3.2 Documentation </3.3.2>`
- :yocto_docs:`3.3.3 Documentation </3.3.3>`
-
-*******************************
-Release Series 3.2 (gatesgarth)
-*******************************
-
-- :yocto_docs:`3.2 Documentation </3.2>`
-- :yocto_docs:`3.2.1 Documentation </3.2.1>`
-- :yocto_docs:`3.2.2 Documentation </3.2.2>`
-- :yocto_docs:`3.2.3 Documentation </3.2.3>`
-- :yocto_docs:`3.2.4 Documentation </3.2.4>`
+- :yocto_docs:`3.3.4 Documentation </3.3.4>`
****************************
Release Series 3.1 (dunfell)
@@ -45,11 +44,23 @@
- :yocto_docs:`3.1.9 Documentation </3.1.9>`
- :yocto_docs:`3.1.10 Documentation </3.1.10>`
- :yocto_docs:`3.1.11 Documentation </3.1.11>`
+- :yocto_docs:`3.1.12 Documentation </3.1.12>`
+- :yocto_docs:`3.1.13 Documentation </3.1.13>`
==========================
Outdated Release Manuals
==========================
+*******************************
+Release Series 3.2 (gatesgarth)
+*******************************
+
+- :yocto_docs:`3.2 Documentation </3.2>`
+- :yocto_docs:`3.2.1 Documentation </3.2.1>`
+- :yocto_docs:`3.2.2 Documentation </3.2.2>`
+- :yocto_docs:`3.2.3 Documentation </3.2.3>`
+- :yocto_docs:`3.2.4 Documentation </3.2.4>`
+
*************************
Release Series 3.0 (zeus)
*************************
diff --git a/poky/documentation/sdk-manual/appendix-customizing.rst b/poky/documentation/sdk-manual/appendix-customizing.rst
index 4eccc28..cac199b 100644
--- a/poky/documentation/sdk-manual/appendix-customizing.rst
+++ b/poky/documentation/sdk-manual/appendix-customizing.rst
@@ -43,7 +43,7 @@
:term:`SDK_INHERIT_BLACKLIST`
are disabled. Using :term:`SDK_INHERIT_BLACKLIST` to disable these
classes is the typical method to disable classes that are problematic
- or unnecessary in the SDK context. The default value blacklists the
+ or unnecessary in the SDK context. The default value disables the
:ref:`buildhistory <ref-classes-buildhistory>`
and :ref:`icecc <ref-classes-icecc>` classes.
@@ -63,9 +63,8 @@
- If your SDK configuration inherits additional classes using the
:term:`INHERIT` variable and you
do not need or want those classes enabled in the SDK, you can
- blacklist them by adding them to the
- :term:`SDK_INHERIT_BLACKLIST`
- variable as described in the fourth bullet of the previous section.
+ disable them by adding them to the :term:`SDK_INHERIT_BLACKLIST`
+ variable as described in the previous section.
.. note::
@@ -275,8 +274,8 @@
places or it will fail quickly on the OpenEmbedded build system
side, and its contents will not interfere with the build), then
you can set the variable in your ``local.conf`` or custom distro
- configuration file. You can then "whitelist" the variable through
- to the SDK by adding the following::
+ configuration file. You can then pass the variable to the SDK by
+ adding the following::
SDK_LOCAL_CONF_WHITELIST = "SSTATE_MIRRORS"
diff --git a/poky/documentation/sdk-manual/extensible.rst b/poky/documentation/sdk-manual/extensible.rst
index 8ef44e3..c5970f7 100644
--- a/poky/documentation/sdk-manual/extensible.rst
+++ b/poky/documentation/sdk-manual/extensible.rst
@@ -315,7 +315,7 @@
$ devtool edit-recipe recipe
From within the editor, you
- can make modifications to the recipe that take affect when you build
+ can make modifications to the recipe that take effect when you build
it later.
3. *Build the Recipe or Rebuild the Image*: The next step you take
diff --git a/poky/documentation/sphinx-static/switchers.js b/poky/documentation/sphinx-static/switchers.js
index 6038dbb..885104c 100644
--- a/poky/documentation/sphinx-static/switchers.js
+++ b/poky/documentation/sphinx-static/switchers.js
@@ -1,12 +1,20 @@
+/*
+NOTE FOR RELEASE MAINTAINERS:
+This file only needs updating in the development release ("master" branch)
+When documentation for stable releases is built,
+the latest version from "master" is used
+by https://git.yoctoproject.org/yocto-autobuilder-helper/tree/scripts/run-docs-build
+*/
+
(function() {
'use strict';
var all_versions = {
'dev': 'dev (3.5)',
- '3.4': '3.4',
- '3.3.3': '3.3.3',
+ '3.4.1': '3.4.1',
+ '3.3.4': '3.3.4',
'3.2.4': '3.2.4',
- '3.1.11': '3.1.11',
+ '3.1.13': '3.1.13',
'3.0.4': '3.0.4',
'2.7.4': '2.7.4',
};
diff --git a/poky/documentation/standards.md b/poky/documentation/standards.md
new file mode 100644
index 0000000..a2274f6
--- /dev/null
+++ b/poky/documentation/standards.md
@@ -0,0 +1,103 @@
+# Standards for contributing to Yocto Project documentation
+
+This document attemps to standardize the way the Yocto Project
+documentation is created.
+
+It is currently a work in progress.
+
+## Text standards
+
+This section has not been filled yet
+
+## ReStructured Text Syntax standards
+
+This section has not been filled yet
+
+## Adding screenshots
+
+The preferred format for adding screenshots is
+[Portable Network Graphics (PNG)](https://en.wikipedia.org/wiki/Portable_Network_Graphics).
+Compared to the JPEG format, PNG is lossless and compresses screenshots better.
+
+Screenshots are stored in a `figures/` subdirectory.
+
+To include a screenshot in PNG format:
+
+ .. image:: figures/user-configuration.png
+ :align: center
+
+Depending on the size of the image, you may also shrink it
+to prevent it from filling the whole page width:
+
+ :scale: 50%
+
+For some types of screenshots, for example showing
+programs displaying photographs or playing video, the JPEG
+format may be more appropriate, because it is better at
+compressing real-life images:
+
+ .. image:: figures/vlc.jpg
+ :align: center
+ :scale: 75%
+
+## Adding new diagrams
+
+New diagrams should be added in
+[Scalable Vector Graphics (SVG) format](https://en.wikipedia.org/wiki/Scalable_Vector_Graphics).
+Thanks to this, diagrams render nicely at any zoom level on generated documentation,
+instead of being pixelated.
+
+The recommended tool for creating SVG diagrams for the Yocto Project
+documentation is [Inkscape](https://inkscape.org/).
+
+### Colors
+
+The "GNOME HIG Colors" palette is used in our diagrams
+(get it from <https://gitlab.gnome.org/Teams/Design/HIG-app-icons/-/blob/master/GNOME%20HIG.gpl>
+if you don't get it from Inkscape).
+
+It's easier to use than the default one in Inkscape,
+as it has fewer but sufficient colors. This is a way
+to guarantee that we use consistent colors across the
+diagrams used in our documentation.
+
+See <https://inkscape-manuals.readthedocs.io/en/latest/palette.html>
+for details about working with color palettes in Inkscape.
+
+### Template diagram
+
+The `template/` directory contains a `template.svg` file
+to make it easier to create diagrams.
+In particular, you can use it to copy standard text, shapes,
+arrows and clipart to the new SVG document.
+
+### Fonts
+
+The recommended font for description text and labels is `Nimbus Roman`, size 10.
+Labels are in bold.
+
+`template.svg` contains ready-to-copy labels.
+
+### Text boxes
+
+Text boxes are rectangle boxes, with rounded corners, and contain centered text
+or labels. Their stroke color is slightly darker than their fill color.
+
+See `template.svg` for example boxes with different colors, which are ready
+to be reused.
+
+### Clipart
+
+Only [Public Domain](https://en.wikipedia.org/wiki/Public_domain)
+files are accepted for clipart. [Openclipart](https://openclipart.org)
+is the best known and recommended source of such clipart.
+
+It is also required to state the source of each new clipart in the commit log,
+to make it possible to check its origin.
+
+For the sake of consistency across diagrams, we recommend
+to use existing cliparts, whenever possible.
+
+If cliparts in `template.svg` do not satisfy your requirements, you can
+add to said file new cliparts, from e.g. Openclipart. Newly added
+cliparts shall stay consistent in style and color with existing ones.
diff --git a/poky/documentation/template/template.svg b/poky/documentation/template/template.svg
new file mode 100644
index 0000000..43043e3
--- /dev/null
+++ b/poky/documentation/template/template.svg
@@ -0,0 +1,1160 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+ version="1.1"
+ id="svg2"
+ width="607.31354"
+ height="968.48285"
+ viewBox="0 0 607.31353 968.48285"
+ sodipodi:docname="template.svg"
+ inkscape:version="1.1 (ce6663b3b7, 2021-05-25)"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:cc="http://creativecommons.org/ns#"
+ xmlns:dc="http://purl.org/dc/elements/1.1/">
+ <metadata
+ id="metadata8">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ </cc:Work>
+ </rdf:RDF>
+ </metadata>
+ <defs
+ id="defs6">
+ <inkscape:path-effect
+ effect="powerstroke"
+ id="path-effect6121"
+ is_visible="true"
+ lpeversion="1"
+ offset_points="0,0.5"
+ sort_points="true"
+ interpolator_type="CubicBezierJohan"
+ interpolator_beta="0.2"
+ start_linecap_type="zerowidth"
+ linejoin_type="extrp_arc"
+ miter_limit="4"
+ scale_width="1"
+ end_linecap_type="zerowidth"
+ not_jump="false" />
+ <marker
+ style="overflow:visible"
+ id="marker5783"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5781" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5623"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5621" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5487"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5485" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5285"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="scale(0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5283" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5161"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5159" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker4860"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path4858" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker4504"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#ffa348;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path4502" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker4286"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true"
+ inkscape:collect="always">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#62a0ea;fill-opacity:1;fill-rule:evenodd;stroke:#62a0ea;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path4284" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow1Mend"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow1Mend"
+ inkscape:isstock="true">
+ <path
+ transform="matrix(-0.4,0,0,-0.4,-4,0)"
+ style="fill:#62a0ea;fill-opacity:1;fill-rule:evenodd;stroke:#62a0ea;stroke-width:1pt;stroke-opacity:1"
+ d="M 0,0 5,-5 -12.5,0 5,5 Z"
+ id="path3318" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker4174"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="scale(0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#62a0ea;fill-opacity:1;fill-rule:evenodd;stroke:#62a0ea;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path4172" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow2Mend"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#ffa348;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path3336" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow1Mstart"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow1Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="matrix(0.4,0,0,0.4,4,0)"
+ style="fill:#ff7800;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:1pt;stroke-opacity:1"
+ d="M 0,0 5,-5 -12.5,0 5,5 Z"
+ id="path3315" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow2Lstart"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Lstart"
+ inkscape:isstock="true">
+ <path
+ transform="matrix(1.1,0,0,1.1,1.1,0)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#ff7800;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path3327" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow1Lstart"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow1Lstart"
+ inkscape:isstock="true">
+ <path
+ transform="matrix(0.8,0,0,0.8,10,0)"
+ style="fill:#ff7800;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:1pt;stroke-opacity:1"
+ d="M 0,0 5,-5 -12.5,0 5,5 Z"
+ id="path3309" />
+ </marker>
+ <linearGradient
+ id="linearGradient921"
+ inkscape:swatch="solid">
+ <stop
+ style="stop-color:#deddda;stop-opacity:1;"
+ offset="0"
+ id="stop919" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient6035-4">
+ <stop
+ id="stop6037-2"
+ style="stop-color:#ffffff"
+ offset="0" />
+ <stop
+ id="stop6039-9"
+ style="stop-color:#ffffff;stop-opacity:0"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient11801"
+ y2="511.97"
+ spreadMethod="reflect"
+ gradientUnits="userSpaceOnUse"
+ x2="286.63"
+ gradientTransform="matrix(4.9627,0,0,4.9627,278.63,-3355.4)"
+ y1="511.97"
+ x1="269.97"
+ inkscape:collect="always">
+ <stop
+ id="stop5497-7"
+ style="stop-color:#497bb3"
+ offset="0" />
+ <stop
+ id="stop5501-5"
+ style="stop-color:#a5c4e6"
+ offset=".20485" />
+ <stop
+ id="stop5499-8"
+ style="stop-color:#3b5d8b"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient11803"
+ y2="527.34003"
+ gradientUnits="userSpaceOnUse"
+ x2="286.63"
+ y1="518.56"
+ x1="282.35999"
+ inkscape:collect="always">
+ <stop
+ id="stop5468-4"
+ style="stop-color:#a5c4e6"
+ offset="0" />
+ <stop
+ id="stop5470-8"
+ style="stop-color:#497bb3"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient11805"
+ y2="520.33002"
+ xlink:href="#linearGradient6035-4"
+ spreadMethod="reflect"
+ gradientUnits="userSpaceOnUse"
+ x2="327.78"
+ gradientTransform="matrix(4.1992,0,0,4.1992,407.33,-3062.9)"
+ y1="522.60999"
+ x1="308.5"
+ inkscape:collect="always" />
+ <linearGradient
+ id="linearGradient11807"
+ y2="520.33002"
+ xlink:href="#linearGradient6035-4"
+ spreadMethod="reflect"
+ gradientUnits="userSpaceOnUse"
+ x2="327.78"
+ gradientTransform="matrix(4.1992,0,0,4.1992,407.33,-3015.8)"
+ y1="522.60999"
+ x1="308.5"
+ inkscape:collect="always" />
+ <linearGradient
+ id="linearGradient11809"
+ y2="520.33002"
+ xlink:href="#linearGradient6035-4"
+ spreadMethod="reflect"
+ gradientUnits="userSpaceOnUse"
+ x2="327.78"
+ gradientTransform="matrix(4.1992,0,0,4.1992,407.33,-2971.6)"
+ y1="522.60999"
+ x1="308.5"
+ inkscape:collect="always" />
+ <marker
+ style="overflow:visible"
+ id="Arrow2Mstart-4"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="scale(0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#ffa348;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path3333-2" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow2Mend-2"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#ffa348;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path3336-7" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5623-2"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5621-3" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="Arrow2Mend-4"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#ffa348;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path3336-3" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5285-1"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="scale(0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5283-7" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5161-4"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5159-3" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5285-1-4"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="scale(0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5283-7-6" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker5161-4-9"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path5159-3-4" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker4174-8"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mstart"
+ inkscape:isstock="true">
+ <path
+ transform="scale(0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#62a0ea;fill-opacity:1;fill-rule:evenodd;stroke:#62a0ea;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path4172-8" />
+ </marker>
+ <marker
+ style="overflow:visible"
+ id="marker4286-6"
+ refX="0"
+ refY="0"
+ orient="auto"
+ inkscape:stockid="Arrow2Mend"
+ inkscape:isstock="true"
+ inkscape:collect="always">
+ <path
+ transform="scale(-0.6)"
+ d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
+ style="fill:#62a0ea;fill-opacity:1;fill-rule:evenodd;stroke:#62a0ea;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
+ id="path4284-8" />
+ </marker>
+ </defs>
+ <sodipodi:namedview
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1"
+ objecttolerance="10"
+ gridtolerance="10"
+ guidetolerance="10"
+ inkscape:pageopacity="0"
+ inkscape:pageshadow="2"
+ inkscape:window-width="1848"
+ inkscape:window-height="983"
+ id="namedview4"
+ showgrid="false"
+ inkscape:zoom="1.0233281"
+ inkscape:cx="454.88832"
+ inkscape:cy="692.83742"
+ inkscape:window-x="1992"
+ inkscape:window-y="27"
+ inkscape:window-maximized="1"
+ inkscape:current-layer="g10"
+ inkscape:document-rotation="0"
+ inkscape:snap-perpendicular="true"
+ fit-margin-top="30"
+ lock-margins="true"
+ fit-margin-left="30"
+ fit-margin-right="30"
+ fit-margin-bottom="30"
+ inkscape:pagecheckerboard="0">
+ <inkscape:grid
+ type="xygrid"
+ id="grid1257"
+ originx="82.778013"
+ originy="165.84269" />
+ </sodipodi:namedview>
+ <g
+ inkscape:groupmode="layer"
+ inkscape:label="Image"
+ id="g10"
+ transform="translate(82.778014,165.84268)">
+ <g
+ id="g3925"
+ transform="matrix(0.4122756,0,0,0.4122756,-156.60748,374.96076)"
+ style="stroke-width:2.42556">
+ <g
+ id="layer1-3-5-2"
+ inkscape:label="Capa 1"
+ transform="matrix(1.1196,0,0,1.1196,-122.82057,267.39056)"
+ style="stroke-width:2.42556">
+ <g
+ id="g10-5-2"
+ transform="matrix(0.0423,0,0,0.0423,319.39,59.128)"
+ class="Graphic"
+ style="stroke-width:2.42556">
+ <g
+ id="g12-4-2"
+ style="stroke-width:2.42556">
+ <g
+ id="g14-64-0"
+ style="fill:#c7c7c7;stroke-width:2.42556">
+ <path
+ id="path16-1-5"
+ inkscape:connector-curvature="0"
+ d="m 5903,2361 c 50,82 34,3995 -31,4149 -51,122 -1703,1495 -1789,1531 -1117,-7 -1870,-414 -1995,-629 -48,-270 -7,-4433 38,-4520 40,-76 2153,-833 2227,-851 67,-15 1493,229 1550,320 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g18-6-5"
+ style="fill:#000000;stroke-width:2.42556">
+ <path
+ id="path20-8-2"
+ inkscape:connector-curvature="0"
+ d="m 5881,2374 2,-1 -2,2 c 0,-1 -1,-1 -1,-1 v -2 l 7,-3 -2,2 -5,1 5,-1 -2,2 z m 2,-1 2,-2 2,-2 5,-2 -5,4 5,-4 h 1 l -6,3 v 1 -1 z m 10,-6 h -1 1 -1 l 11,-6 -10,5 z m 11,-4 -11,4 v -1 z m 20,-15 c -2,-3 -4,-6 -7,-9 -2,-3 -5,-5 -8,-7 -5,-4 -12,-8 -20,-12 -7,-4 -15,-7 -24,-11 -9,-4 -19,-7 -30,-11 -21,-8 -47,-16 -75,-24 -29,-8 -61,-16 -95,-25 -136,-34 -313,-72 -494,-106 -181,-35 -364,-66 -511,-90 -73,-11 -138,-21 -189,-27 -25,-3 -47,-6 -65,-8 -9,-1 -17,-1 -24,-2 -4,0 -7,0 -10,-1 h -9 c -3,0 -5,0 -7,1 h -4 c -2,0 -3,0 -4,1 -2,0 -4,1 -7,2 -2,0 -5,1 -8,2 -3,1 -7,2 -11,3 -4,2 -8,3 -13,5 -10,3 -22,7 -35,12 -13,4 -28,9 -44,15 -33,11 -71,25 -115,40 -43,15 -91,32 -144,51 -209,75 -481,173 -753,274 -271,101 -542,203 -747,285 -51,21 -98,40 -140,57 -43,18 -80,34 -111,48 -16,7 -30,14 -42,20 -13,6 -24,12 -33,17 -5,2 -9,5 -13,7 -4,3 -8,5 -10,7 -4,3 -7,5 -9,7 -5,4 -7,8 -9,11 -1,2 -2,5 -4,9 0,3 -1,6 -1,9 -1,3 -1,7 -2,11 -1,4 -1,8 -2,13 0,9 -1,20 -3,32 0,13 -1,27 -2,42 -2,31 -4,69 -6,111 -2,43 -4,91 -5,144 -7,213 -14,504 -19,835 -11,662 -19,1482 -19,2144 0,308 2,583 5,791 1,52 2,100 3,143 1,43 3,82 4,115 1,34 3,62 4,85 1,12 2,22 3,30 1,5 1,9 1,13 1,3 2,7 2,10 l 1,4 2,4 c 9,15 20,30 33,46 14,16 30,32 48,49 35,32 80,66 135,101 107,70 249,142 423,207 173,65 377,124 608,167 231,43 489,70 769,72 h 6 l 5,-2 8,-4 c 2,-2 5,-3 8,-6 3,-2 6,-4 10,-6 l 12,-9 c 9,-6 19,-13 30,-22 11,-8 23,-17 37,-28 27,-20 58,-45 93,-73 35,-28 74,-59 116,-93 169,-136 385,-315 600,-497 215,-181 430,-366 593,-512 41,-37 79,-71 113,-103 34,-31 64,-59 89,-84 13,-13 24,-24 34,-35 11,-11 20,-20 28,-29 8,-9 14,-17 19,-23 3,-4 5,-8 7,-10 2,-4 4,-8 6,-11 0,-2 1,-5 2,-8 1,-3 2,-5 3,-9 1,-6 2,-13 3,-22 2,-8 3,-17 4,-28 1,-11 2,-22 3,-35 2,-25 4,-55 7,-89 1,-34 3,-72 5,-113 8,-166 14,-391 19,-648 10,-516 16,-1164 16,-1743 0,-389 -3,-747 -8,-1012 -1,-66 -2,-127 -4,-181 -1,-53 -3,-100 -5,-139 -1,-20 -2,-38 -3,-53 -1,-16 -2,-30 -3,-41 -1,-6 -1,-11 -2,-16 -1,-5 -1,-10 -2,-13 -1,-4 -1,-8 -2,-11 -1,-2 -1,-4 -2,-5 -1,-3 -2,-5 -3,-6 z m -37,21 12,-12 z m -6,9 c 1,3 1,7 2,11 0,4 1,9 1,15 1,11 3,24 4,39 0,15 1,33 2,52 2,39 4,86 6,139 1,53 2,114 4,180 5,264 7,622 7,1011 0,578 -5,1227 -15,1742 -6,257 -12,481 -19,646 -2,42 -4,79 -6,113 -2,33 -4,63 -6,88 -1,12 -2,24 -4,34 0,10 -2,18 -3,26 -1,7 -2,14 -3,18 0,3 -1,4 -1,6 0,1 -1,2 -1,2 0,1 -1,2 -2,4 -1,1 -3,4 -4,6 -5,6 -10,13 -17,21 -7,7 -16,17 -26,27 l -34,34 c -25,24 -54,52 -88,83 -33,31 -71,66 -112,102 -163,146 -377,330 -592,512 -215,181 -431,360 -598,495 -42,34 -81,65 -116,93 -35,28 -66,52 -93,73 -13,10 -26,20 -37,28 -10,8 -20,15 -28,21 -4,3 -8,6 -12,8 -3,2 -6,4 -8,6 -2,1 -4,2 -5,3 -276,-2 -528,-29 -755,-71 -228,-42 -429,-100 -600,-164 -169,-64 -308,-134 -413,-202 -51,-33 -94,-66 -128,-97 -17,-15 -31,-30 -43,-44 -10,-12 -19,-23 -26,-34 v -4 c -1,-3 -1,-7 -1,-11 -1,-8 -2,-18 -3,-28 -2,-23 -3,-51 -5,-84 -1,-33 -2,-71 -3,-115 -1,-42 -2,-90 -3,-142 -3,-208 -5,-482 -5,-790 0,-662 7,-1481 18,-2143 6,-330 12,-622 19,-834 2,-53 4,-101 6,-144 2,-42 3,-79 5,-109 1,-16 2,-30 3,-42 1,-12 2,-22 3,-31 0,-4 1,-8 1,-11 1,-4 1,-6 2,-9 v -2 c 0,-1 1,-1 2,-2 2,-1 4,-3 7,-5 4,-1 7,-4 11,-6 9,-5 19,-10 31,-16 12,-6 26,-12 41,-19 31,-14 67,-29 109,-47 42,-17 89,-37 140,-57 205,-82 475,-184 746,-284 271,-101 543,-200 752,-274 52,-19 101,-36 144,-51 43,-16 82,-29 114,-40 17,-6 31,-11 44,-16 13,-4 25,-8 35,-11 4,-2 9,-3 13,-4 4,-2 7,-3 10,-4 3,-1 5,-1 8,-2 l 3,-1 -2,-8 1,8 h 1 4 7 c 2,0 5,0 8,1 7,0 14,1 23,2 17,1 39,4 64,7 50,6 114,16 187,27 147,23 329,55 509,89 180,35 357,72 492,106 34,9 65,17 92,25 28,8 53,15 73,23 10,3 20,7 28,10 7,3 15,6 20,9 5,3 10,5 13,8 0,0 1,0 1,1 0,1 1,3 1,4 z M 4075,8017 c 1,0 1,-1 2,-1 h 6 v 14 l -8,-13 8,13 v 11 l -10,-23 c 0,0 1,-1 2,-1 z M 2110,7400 c 1,1 1,3 2,4 1,1 1,3 1,4 l -25,4 21,-11 1,-1 -1,1 1,-1 h 2 z m 39,-4498 v 3 c -1,0 -1,1 -2,1 l -5,-6 -17,-4 17,4 -2,-1 4,2 z m -7,-2 2,1 z m -16,-8 14,7 z m 14,7 -10,-11 z m 2217,-841 -2,-17 z m -4,-17 4,17 v 1 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g22-8-9"
+ style="fill:#ffffff;fill-opacity:0.54118;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.54118">
+ <path
+ id="path24-1-0"
+ inkscape:connector-curvature="0"
+ d="m 5822,2442 -52,22 -52,23 -52,23 -53,25 -53,25 -53,26 -53,26 -54,27 -54,27 -54,28 -55,28 -54,29 -55,29 -55,29 -111,60 -112,60 -112,60 -113,61 -114,60 -114,60 -114,59 -57,29 -57,29 -58,28 -57,28 -27,-6 -28,-7 -56,-13 -58,-14 -59,-13 -60,-14 -61,-14 -61,-14 -63,-14 -62,-14 -63,-15 -127,-28 -127,-28 -64,-14 -63,-14 -62,-13 -62,-13 -61,-13 -60,-13 -60,-13 -58,-12 -57,-12 -28,-5 -28,-6 -27,-5 -27,-6 -27,-5 -26,-5 -26,-5 -25,-6 -25,-4 -24,-5 -24,-5 -24,-4 -23,-4 -22,-5 -22,-4 -21,-3 -21,-4 -20,-4 52,16 52,16 53,16 54,15 55,16 55,15 57,16 56,15 57,16 58,15 116,31 117,30 118,31 118,31 117,30 116,31 58,15 57,16 57,15 56,16 55,15 55,16 54,15 53,16 52,16 52,16 1,60 2,61 1,61 1,63 1,64 2,64 1,65 1,66 1,67 1,67 1,68 v 69 l 1,69 1,70 1,70 v 71 l 1,71 v 72 l 1,72 1,73 1,146 1,147 v 149 l 1,149 2,299 1,300 1,149 1,148 1,147 1,146 1,73 v 72 l 1,72 1,71 v 71 l 1,71 1,69 1,70 v 68 l 1,68 1,67 1,67 1,66 1,65 1,65 2,63 1,63 1,62 2,61 1,60 1,-61 1,-61 v -63 l 1,-63 1,-64 1,-65 1,-66 1,-67 1,-67 1,-68 1,-69 2,-69 1,-70 1,-71 1,-71 1,-72 1,-72 2,-73 1,-73 1,-73 3,-148 3,-149 2,-151 3,-151 6,-303 5,-303 3,-151 3,-150 2,-149 3,-149 1,-73 2,-73 1,-73 1,-72 1,-71 1,-72 1,-70 2,-70 1,-70 1,-68 1,-68 1,-68 1,-66 1,-66 1,-65 1,-64 1,-64 v -62 l 1,-62 1,-60 110,-59 109,-59 109,-57 109,-58 108,-57 107,-58 107,-57 107,-58 105,-58 105,-58 104,-60 103,-60 51,-30 50,-31 51,-31 50,-31 50,-31 50,-32 49,-32 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g28-1-8"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path30-7-3"
+ inkscape:connector-curvature="0"
+ d="m 5822,2442 c -549,232 -1156,606 -1768,901 -580,-138 -1417,-322 -1839,-396 543,169 1257,327 1800,496 32,1271 16,3196 48,4467 16,-1282 59,-3238 75,-4519 586,-317 1161,-601 1684,-949 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g32-7-8"
+ style="fill:#000000;fill-opacity:0.16078;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.16078">
+ <path
+ id="path34-1-0"
+ inkscape:connector-curvature="0"
+ d="m 2420,6628 10,14 10,13 11,13 12,13 12,12 12,12 14,12 13,12 14,12 15,11 15,11 16,11 15,11 17,10 16,10 17,11 18,9 18,10 18,9 18,8 19,9 19,8 19,8 19,8 40,15 40,14 41,12 41,11 42,10 41,9 42,8 41,6 41,6 41,3 21,2 20,1 19,1 h 20 20 19 l 19,-1 19,-1 18,-1 19,-1 17,-2 18,-3 17,-2 17,-3 17,-4 16,-4 15,-4 15,-4 15,-5 15,-5 -2,-1 h -1 l -5,-2 -6,-1 -7,-2 -8,-2 -10,-3 -10,-3 -12,-3 -13,-4 -14,-3 -15,-4 -16,-5 -16,-4 -18,-5 -18,-5 -19,-5 -20,-6 -20,-5 -21,-6 -22,-6 -22,-6 -22,-6 -23,-7 -24,-6 -48,-13 -49,-14 -50,-14 -50,-13 -50,-15 -50,-13 -49,-14 -49,-13 -23,-7 -24,-6 -23,-7 -22,-6 -22,-6 -21,-6 -21,-6 -20,-5 -19,-6 -19,-5 -18,-5 -17,-5 -16,-4 -15,-5 -15,-4 -13,-4 -12,-3 -12,-3 -10,-3 -9,-3 -7,-2 -7,-2 -5,-2 h -2 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g38-5-0"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path40-7-9"
+ inkscape:connector-curvature="0"
+ d="m 2420,6628 c 201,289 833,431 1133,315 -53,-14 -1066,-293 -1133,-315 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g42-6-1"
+ style="fill:#ffffff;fill-opacity:0.38824;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.38824">
+ <path
+ id="path44-7-9"
+ inkscape:connector-curvature="0"
+ d="m 3454,6093 -936,-361 -9,4 -8,4 -8,4 -6,5 -6,6 -6,6 -5,7 -5,6 -4,7 -4,7 -3,7 -3,8 -3,8 -2,7 -3,15 -2,15 -2,14 v 6 7 5 6 5 4 4 l 1,4 v 2 2 1 1 l 146,51 1,1 1,1 1,1 1,2 2,2 1,3 3,3 2,3 3,4 3,4 3,4 4,5 4,4 4,6 5,4 10,12 10,11 13,12 13,12 14,13 15,12 17,13 17,12 19,12 19,11 21,11 22,10 11,4 11,5 12,4 12,4 13,3 12,3 13,3 13,3 13,2 13,1 14,2 14,1 h 14 15 15 l 15,-1 15,-2 15,-2 16,-2 16,-3 16,-4 16,-4 17,-5 17,-6 h 1 l 2,1 h 3 l 6,1 6,1 7,1 8,1 9,1 10,1 11,1 12,1 12,1 h 12 l 13,1 h 26 l 14,-1 13,-1 14,-1 13,-2 13,-2 12,-3 12,-3 12,-3 10,-5 11,-5 9,-6 8,-6 8,-8 3,-4 3,-4 3,-4 2,-4 2,-5 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g48-57-2"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path50-0-5"
+ inkscape:connector-curvature="0"
+ d="m 3454,6093 -936,-361 c -97,34 -78,177 -78,177 l 146,51 c 0,0 204,319 566,194 0,0 269,48 302,-61 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g52-5-4"
+ style="fill:#606060;stroke-width:2.42556">
+ <path
+ id="path54-7-4"
+ inkscape:connector-curvature="0"
+ d="m 3446,5971 c -311,-81 -622,-161 -933,-242 -12,44 -13,107 6,140 47,23 142,41 189,64 136,131 255,142 472,124 84,17 168,31 251,48 26,-51 33,-72 15,-134 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g56-7-9"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path58-8-9"
+ inkscape:connector-curvature="0"
+ d="m 3446,5971 c -311,-81 -622,-161 -933,-242 -12,44 -13,107 6,140 47,23 142,41 189,64 136,131 255,142 472,124 84,17 168,31 251,48 26,-51 33,-72 15,-134 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g60-5-3"
+ style="fill:#ffffff;fill-opacity:0.4;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.4">
+ <path
+ id="path62-2-6"
+ inkscape:connector-curvature="0"
+ d="m 5856,2414 -1813,1017 7,4549 1775,-1494 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g66-2-5"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path68-9-0"
+ inkscape:connector-curvature="0"
+ d="m 5856,2414 -1813,1017 7,4549 1775,-1494 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g70-9-2"
+ style="fill:#000000;fill-opacity:0.16078;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.16078">
+ <path
+ id="path72-9-9"
+ inkscape:connector-curvature="0"
+ d="m 2525,6916 10,13 11,12 10,13 11,11 11,12 11,11 12,11 12,10 12,10 12,10 13,10 12,9 13,9 13,8 27,17 28,15 28,14 28,13 29,11 29,11 30,9 30,8 29,8 30,6 30,5 30,4 30,3 30,2 29,2 h 29 l 29,-1 27,-2 28,-2 27,-3 26,-5 25,-5 24,-6 24,-6 22,-8 -2,-1 h -4 l -4,-2 -5,-1 -6,-2 -8,-2 -8,-2 -9,-2 -10,-3 -10,-3 -11,-3 -12,-3 -13,-4 -13,-3 -14,-4 -15,-4 -15,-4 -15,-5 -16,-4 -16,-5 -17,-4 -18,-5 -35,-10 -36,-10 -38,-10 -38,-10 -38,-11 -76,-21 -37,-10 -37,-11 -36,-10 -17,-4 -17,-5 -17,-5 -16,-4 -16,-5 -15,-4 -15,-4 -14,-4 -14,-4 -13,-4 -12,-3 -11,-3 -12,-3 -10,-3 -9,-3 -8,-2 -8,-3 -7,-1 -6,-2 -5,-2 -4,-1 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g76-2-3"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path78-7-5"
+ inkscape:connector-curvature="0"
+ d="m 2525,6916 c 209,276 627,323 861,239 -39,-10 -810,-222 -861,-239 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g80-6-1"
+ style="fill:#000000;fill-opacity:0.16078;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.16078">
+ <path
+ id="path82-0-7"
+ inkscape:connector-curvature="0"
+ d="m 2680,7199 12,15 12,14 13,14 14,12 14,13 14,11 15,11 16,11 15,9 17,9 16,9 17,7 18,7 17,7 18,5 18,5 18,5 19,3 18,4 19,2 18,2 19,1 h 19 19 l 18,-1 19,-2 18,-2 19,-3 18,-4 18,-4 18,-5 17,-6 h -1 l -2,-1 h -3 l -4,-1 -3,-1 -5,-2 -5,-1 -6,-2 -6,-1 -6,-2 -7,-2 -8,-2 -8,-2 -8,-3 -9,-2 -9,-2 -19,-6 -20,-5 -22,-6 -22,-6 -23,-6 -23,-7 -48,-13 -48,-13 -23,-7 -23,-6 -23,-6 -21,-6 -21,-6 -19,-6 -9,-2 -9,-3 -9,-2 -8,-2 -8,-2 -7,-2 -7,-2 -6,-2 -6,-2 -5,-2 -5,-1 -5,-1 -3,-1 -3,-1 -3,-1 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g86-0-3"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path88-3-1"
+ inkscape:connector-curvature="0"
+ d="m 2680,7199 c 121,163 355,213 540,149 -25,-6 -507,-139 -540,-149 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g90-5-4"
+ style="fill:#fcfcfc;fill-opacity:0.43922;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.43922">
+ <path
+ id="path92-9-6"
+ inkscape:connector-curvature="0"
+ d="m 2356,3259 -92,13 -17,2173 1425,399 35,-116 -1369,-365 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g96-7-4"
+ style="fill:none;stroke-width:2.42556">
+ <path
+ id="path98-7-2"
+ inkscape:connector-curvature="0"
+ d="m 2356,3259 -92,13 -17,2173 1425,399 35,-116 -1369,-365 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g100-1-2"
+ style="fill:#000000;fill-opacity:0.23137;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.23137">
+ <path
+ id="path102-64-6"
+ inkscape:connector-curvature="0"
+ d="m 3700,4065 -2,61 -1340,-386 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g106-1-1"
+ style="fill:#000000;fill-opacity:0.23137;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.23137">
+ <path
+ id="path108-3-2"
+ inkscape:connector-curvature="0"
+ d="m 3720,4507 -3,61 -1339,-386 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g112-9-8"
+ style="fill:#000000;fill-opacity:0.23137;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.23137">
+ <path
+ id="path114-09-9"
+ inkscape:connector-curvature="0"
+ d="m 3700,4916 -2,61 -1340,-386 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g118-8-8"
+ style="fill:#000000;fill-opacity:0.23137;stroke:#ffffff;stroke-width:2.42556;stroke-opacity:0.23137">
+ <path
+ id="path120-3-8"
+ inkscape:connector-curvature="0"
+ d="m 3700,5318 -2,61 -1340,-387 z"
+ style="stroke-width:2.42556" />
+ </g>
+ <g
+ id="g124-5-6"
+ style="fill:#9e9e9e;stroke-width:2.42556">
+ <path
+ id="path126-3-8"
+ inkscape:connector-curvature="0"
+ d="m 2361,3309 1332,333 -11,2197 h 11 11 l 11,-2205 v -9 l -8,-2 -1341,-335 -2,11 z m 1340,335 -8,-2 v -8 h 11 z"
+ style="stroke-width:2.42556" />
+ </g>
+ </g>
+ </g>
+ </g>
+ <g
+ id="g16724-3"
+ transform="matrix(0.52218647,0,0,0.42933357,-400.52138,1028.8214)"
+ style="stroke-width:2.42556">
+ <path
+ id="path5488-8"
+ d="m 1618.4,-890.85 v 126.36 h 0.5249 c -0.3385,1.0131 -0.5249,1.975 -0.5249,3.0182 0,15.228 36.989,27.557 82.672,27.557 45.683,0 82.672,-12.33 82.672,-27.557 0,-1.0447 -0.1856,-2.0037 -0.5249,-3.0182 h 0.5249 v -126.36 h -165.34 z"
+ sodipodi:nodetypes="cccssscccc"
+ style="fill:url(#linearGradient11801);stroke-width:2.42556"
+ inkscape:connector-curvature="0" />
+ <ellipse
+ id="path5460-3"
+ style="fill:url(#linearGradient11803);stroke-width:2.42556"
+ transform="matrix(4.9627,0,0,4.9627,278.63,-3481.3)"
+ cx="286.6308"
+ cy="521.77954"
+ rx="16.667517"
+ ry="5.5558391" />
+ <path
+ id="path6026-3"
+ d="m 1618.3,-800.18 c 0.6187,15.05 37.507,27.164 82.804,27.164 45.168,0 81.851,-12.042 82.672,-27.033 -14.494,12.328 -46.02,20.865 -82.672,20.865 -36.727,0 -68.35,-8.6271 -82.804,-20.996 z"
+ style="fill:#3b5d8b;stroke-width:2.42556"
+ inkscape:connector-curvature="0" />
+ <path
+ id="path6030-3"
+ d="m 1618.3,-891.51 c 0.6187,15.05 37.507,27.164 82.804,27.164 45.168,0 81.851,-12.042 82.672,-27.033 -0.9058,0.77052 -1.8509,1.4911 -2.8869,2.2308 -0.038,0.0491 -0.091,0.0823 -0.131,0.13101 -9.6253,11.663 -41.587,20.209 -79.654,20.209 -38.306,0 -70.487,-8.6955 -79.917,-20.471 -0.1046,-0.0752 -0.1596,-0.18729 -0.2625,-0.26245 -0.9185,-0.67058 -1.8123,-1.2733 -2.6245,-1.9684 z"
+ style="fill:url(#linearGradient11805);stroke-width:2.42556"
+ inkscape:connector-curvature="0" />
+ <path
+ id="path6022-8"
+ style="fill:#3b5d8b;stroke-width:2.42556"
+ inkscape:connector-curvature="0"
+ d="m 1618.3,-844.36 c 0.6187,15.05 37.507,27.164 82.804,27.164 45.168,0 81.851,-12.042 82.672,-27.033 -14.494,12.328 -46.02,20.865 -82.672,20.865 -36.727,0 -68.35,-8.6271 -82.804,-20.996 z" />
+ <path
+ id="path6043-0"
+ d="m 1618.3,-844.36 c 0.6187,15.05 37.507,27.164 82.804,27.164 45.168,0 81.851,-12.042 82.672,-27.033 -0.2087,0.17721 -0.4427,0.3519 -0.6561,0.52491 -5.2161,13.55 -39.937,24.014 -82.016,24.014 -42.466,0 -77.55,-10.545 -82.279,-24.277 -0.1684,-0.13312 -0.3624,-0.2549 -0.5249,-0.39347 z"
+ style="fill:url(#linearGradient11807);stroke-width:2.42556"
+ inkscape:connector-curvature="0" />
+ <path
+ id="path6054-4"
+ style="fill:url(#linearGradient11809);stroke-width:2.42556"
+ inkscape:connector-curvature="0"
+ d="m 1618.3,-800.18 c 0.6187,15.05 37.507,27.164 82.804,27.164 45.168,0 81.851,-12.042 82.672,-27.033 -0.2087,0.17721 -0.4427,0.3519 -0.6561,0.52491 -5.2161,13.55 -39.937,24.014 -82.016,24.014 -42.466,0 -77.55,-10.545 -82.279,-24.277 -0.1684,-0.13312 -0.3624,-0.2549 -0.5249,-0.39347 z" />
+ <path
+ id="path6060-7"
+ d="m 1618.8,-754.64 c 4.7284,13.732 39.813,24.277 82.279,24.277 42.079,0 76.8,-10.464 82.016,-24.014 -14.766,12.043 -45.892,20.34 -82.016,20.34 -36.314,0 -67.608,-8.4562 -82.279,-20.602 z"
+ style="fill:#3b5d8b;stroke-width:2.42556"
+ inkscape:connector-curvature="0" />
+ </g>
+ </g>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-40.600285"
+ y="693.29376"
+ id="text1185"><tspan
+ sodipodi:role="line"
+ id="tspan1183"
+ x="-40.600285"
+ y="693.29376"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';stroke:none">Server / computer</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-43.34169"
+ y="769.37323"
+ id="text1185-2"><tspan
+ sodipodi:role="line"
+ id="tspan1183-6"
+ x="-43.34169"
+ y="769.37323"
+ style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Normal';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Note: Public domain graphics from https://openclipart.org/</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:42.5884px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="142.22464"
+ y="565.10297"
+ id="text907"><tspan
+ sodipodi:role="line"
+ id="tspan905"
+ x="142.22464"
+ y="565.10297" /></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:42.5884px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="98.363503"
+ y="637.8432"
+ id="text911"><tspan
+ sodipodi:role="line"
+ id="tspan909"
+ x="98.363503"
+ y="637.8432" /></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:42.5884px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-59.575905"
+ y="580.05695"
+ id="text915"><tspan
+ sodipodi:role="line"
+ id="tspan913"
+ x="-59.575905"
+ y="580.05695" /></text>
+ <rect
+ style="fill:#deddda;fill-opacity:1;fill-rule:evenodd;stroke:#9a9996;stroke-width:2;stroke-opacity:1"
+ id="rect917-0"
+ width="120.00001"
+ height="69.017166"
+ x="240"
+ y="120.98283"
+ ry="3.4599047" />
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="301.85687"
+ y="147.99857"
+ id="text1185-3-55"><tspan
+ sodipodi:role="line"
+ id="tspan1183-8-2"
+ x="301.85687"
+ y="147.99857"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';text-align:center;text-anchor:middle;stroke:none">Light 3</tspan><tspan
+ sodipodi:role="line"
+ x="303.70908"
+ y="165.99524"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';stroke:none"
+ id="tspan957-2"><tspan
+ id="tspan65063"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';text-align:center;text-anchor:middle;stroke:none">box</tspan> </tspan></text>
+ <g
+ id="g1125-0"
+ transform="matrix(0.42240595,0,0,0.41654472,-55.833175,-195.15195)"
+ style="stroke:none;stroke-width:2.38399">
+ <rect
+ style="opacity:1;fill:#333333;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4.76797;stroke-opacity:1"
+ id="rect1061-9"
+ width="452.00439"
+ height="192.0562"
+ x="11.609296"
+ y="276.44562"
+ ry="4.0176301" />
+ <g
+ id="g1109-1"
+ transform="translate(-2.7615661,-1.7576335)"
+ style="stroke:none;stroke-width:2.38399">
+ <path
+ id="path14-9"
+ class="st0"
+ d="m 439.74452,358.11274 c 0,4.22 -3.41,7.64 -7.64,7.64 -4.22,0 -7.63,-3.42 -7.63,-7.64 0,-4.22 3.41,-7.64 7.63,-7.64 4.23,0 7.64,3.42 7.64,7.64 v 0"
+ style="fill:#4a97d2;fill-opacity:1;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path16-6"
+ class="st1"
+ d="m 114.56452,324.94274 -11.13,-6.3 -22.409996,45.41 -23.9,-45.41 -11.27,6.3 28.41,53.38 c -0.21,0.51 -0.86,1.9 -1.95,4.22 -1.11,2.21 -2.25,4.41 -3.46,6.62 -2.11,3.81 -4.26,6.91 -6.46,9.32 -2.21,2.51 -4.46,4.51 -6.78,6.02 -2.3,1.51 -4.7,2.65 -7.21,3.46 -2.41,0.8 -4.87,1.45 -7.38,1.95 l 5.12,10.68 c 1.6,-0.21 3.75,-0.71 6.46,-1.51 2.81,-0.7 5.86,-2.06 9.17,-4.06 3.3,-2 6.67,-4.86 10.07,-8.57 3.52,-3.71 6.78,-8.62 9.78,-14.73 l 32.939996,-66.78"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path18-2"
+ class="st1"
+ d="m 175.39452,358.18274 c 0,3.51 -0.6,6.76 -1.81,9.78 -1.21,3 -2.86,5.62 -4.95,7.81 -2.01,2.11 -4.41,3.81 -7.22,5.12 -2.71,1.19 -5.67,1.8 -8.87,1.8 -3.21,0 -6.22,-0.6 -9.02,-1.8 -2.81,-1.31 -5.27,-3.01 -7.38,-5.12 -2,-2.19 -3.6,-4.81 -4.81,-7.81 -1.21,-3.01 -1.81,-6.27 -1.81,-9.78 0,-3.51 0.6,-6.76 1.81,-9.77 1.21,-3 2.81,-5.61 4.81,-7.82 2.11,-2.21 4.57,-3.92 7.38,-5.11 2.8,-1.32 5.81,-1.97 9.02,-1.97 3.21,0 6.16,0.65 8.87,1.97 2.81,1.19 5.21,2.9 7.22,5.11 2.1,2.21 3.75,4.81 4.95,7.82 1.2,3.01 1.81,6.26 1.81,9.77 m 13.98,0 c 0,-5.21 -0.95,-10.08 -2.86,-14.59 -1.81,-4.51 -4.36,-8.42 -7.67,-11.73 -3.32,-3.3 -7.22,-5.86 -11.73,-7.67 -4.51,-1.9 -9.38,-2.86 -14.59,-2.86 -5.21,0 -10.08,0.95 -14.59,2.86 -4.51,1.81 -8.43,4.36 -11.73,7.67 -3.3,3.31 -5.92,7.22 -7.82,11.73 -1.9,4.51 -2.86,9.38 -2.86,14.59 0,5.21 0.95,10.08 2.86,14.59 1.9,4.41 4.52,8.27 7.82,11.57 3.3,3.32 7.22,5.92 11.73,7.82 4.51,1.81 9.38,2.71 14.59,2.71 5.21,0 10.08,-0.9 14.59,-2.71 4.51,-1.91 8.41,-4.51 11.73,-7.82 3.3,-3.3 5.86,-7.16 7.67,-11.57 1.91,-4.51 2.86,-9.38 2.86,-14.59"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path20-5"
+ class="st1"
+ d="m 373.22452,358.18274 c 0,3.51 -0.6,6.76 -1.81,9.78 -1.21,3 -2.86,5.62 -4.97,7.81 -2,2.11 -4.4,3.81 -7.21,5.12 -2.71,1.19 -5.67,1.8 -8.87,1.8 -3.21,0 -6.22,-0.6 -9.03,-1.8 -2.8,-1.31 -5.26,-3.01 -7.37,-5.12 -2,-2.19 -3.61,-4.81 -4.81,-7.81 -1.21,-3.01 -1.81,-6.27 -1.81,-9.78 0,-3.51 0.6,-6.76 1.81,-9.77 1.21,-3 2.81,-5.61 4.81,-7.82 2.11,-2.21 4.57,-3.92 7.37,-5.11 2.81,-1.32 5.82,-1.97 9.03,-1.97 3.21,0 6.16,0.65 8.87,1.97 2.81,1.19 5.21,2.9 7.21,5.11 2.11,2.21 3.76,4.81 4.97,7.82 1.21,3.01 1.81,6.26 1.81,9.77 m 13.98,0 c 0,-5.21 -0.95,-10.08 -2.86,-14.59 -1.81,-4.51 -4.36,-8.42 -7.67,-11.73 -3.32,-3.3 -7.22,-5.86 -11.73,-7.67 -4.51,-1.9 -9.38,-2.86 -14.59,-2.86 -5.22,0 -10.08,0.95 -14.59,2.86 -4.51,1.81 -8.43,4.36 -11.73,7.67 -3.3,3.31 -5.92,7.22 -7.82,11.73 -1.9,4.51 -2.86,9.38 -2.86,14.59 0,5.21 0.95,10.08 2.86,14.59 1.9,4.41 4.52,8.27 7.82,11.57 3.3,3.32 7.22,5.92 11.73,7.82 4.51,1.81 9.37,2.71 14.59,2.71 5.21,0 10.08,-0.9 14.59,-2.71 4.51,-1.91 8.41,-4.51 11.73,-7.82 3.3,-3.3 5.86,-7.16 7.67,-11.57 1.91,-4.51 2.86,-9.38 2.86,-14.59"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path22-4"
+ class="st1"
+ d="m 288.05452,298.59274 -13.39,7.52 v 16.45 h -36.21 c -26.15,0 -41.9,12.74 -41.9,35.95 0,36.04 37.55,42.84 64.25,29.96 l -5.63,-10.92 c -21.13,9.23 -44.53,5.3 -44.53,-19.28 0,-15.86 8.26,-24.54 27.49,-24.54 h 36.54 v 43.82 c 0,19.37 22.19,19.81 35.95,11.86 l -5.29,-10.45 c -8.85,4.48 -17.26,5.06 -17.26,-3.53 v -41.7 h 18.32 v -11.17 h -18.32 l -0.02,-23.97 v 0"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path24-4"
+ class="st1"
+ d="m 136.79452,428.30274 h 3.35 c 1.69,-0.01 3.34,1.19 3.34,2.9 0,2.87 -3.23,3.3 -3.23,3.3 l -3.46,0.02 z m -4.84,-4.1 v 25.3 h 4.83 l 0.06,-10.67 c 8.62,0.54 11.84,-2.46 11.84,-7.75 0,-4.75 -4.26,-6.88 -8.34,-6.88 h -8.39 v 0"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path26-9"
+ class="st1"
+ d="m 224.38452,436.87274 c 0,1.23 -0.23,2.39 -0.69,3.46 -0.42,1.04 -1.02,1.95 -1.81,2.74 -0.78,0.78 -1.7,1.4 -2.75,1.86 -1.04,0.42 -2.17,0.64 -3.38,0.64 -1.22,0 -2.35,-0.22 -3.39,-0.64 -1.05,-0.46 -1.96,-1.07 -2.75,-1.86 -0.76,-0.78 -1.36,-1.7 -1.81,-2.74 -0.46,-1.07 -0.69,-2.23 -0.69,-3.46 0,-1.23 0.23,-2.37 0.69,-3.42 0.45,-1.06 1.05,-1.99 1.81,-2.77 0.78,-0.78 1.7,-1.39 2.75,-1.82 1.04,-0.45 2.17,-0.67 3.39,-0.67 1.21,0 2.34,0.23 3.38,0.67 1.05,0.43 1.96,1.04 2.75,1.82 0.78,0.78 1.39,1.71 1.81,2.77 0.46,1.05 0.69,2.19 0.69,3.42 m 4.9,0 c 0,-1.81 -0.35,-3.5 -1.06,-5.06 -0.69,-1.59 -1.65,-2.97 -2.89,-4.12 -1.21,-1.17 -2.64,-2.09 -4.3,-2.75 -1.64,-0.69 -3.41,-1.04 -5.3,-1.04 -1.9,0 -3.69,0.35 -5.35,1.04 -1.64,0.66 -3.06,1.58 -4.27,2.75 -1.22,1.16 -2.17,2.53 -2.89,4.12 -0.69,1.57 -1.03,3.25 -1.03,5.06 0,1.83 0.34,3.53 1.03,5.1 0.72,1.57 1.68,2.94 2.89,4.12 1.21,1.17 2.63,2.09 4.27,2.75 1.66,0.66 3.45,1 5.35,1 1.89,0 3.67,-0.34 5.3,-1 1.66,-0.66 3.1,-1.58 4.3,-2.75 1.24,-1.18 2.21,-2.55 2.89,-4.12 0.71,-1.56 1.06,-3.26 1.06,-5.1"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path28-9"
+ class="st1"
+ d="m 249.02452,424.25274 v 19.18 c 0,0.77 -0.57,1.63 -1.51,1.65 l -1.51,0.06 0.08,4.7 1.41,0.02 c 4.73,0.07 6.36,-4.37 6.36,-6.45 v -19.13"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path30-3"
+ class="st1"
+ d="m 290.20452,424.19274 h -16.13 v 25.22 h 16.2 l -0.07,-4.06 h -11.28 v -6.58 h 9.44 v -4.06 h -9.44 v -6.38 h 11.21 l 0.07,-4.14"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path32-6"
+ class="st1"
+ d="m 327.39452,430.24274 c -8.26,-4.53 -16.39,-1.78 -16.39,6.52 0,6.69 6.43,11.84 17,6.31 l 1.53,4.13 c -10.15,5.58 -23.51,1.6 -23.51,-10.44 0,-10.91 11.85,-16.59 23.36,-10.61 l -1.99,4.09"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path34-0"
+ class="st1"
+ d="m 366.07452,424.19274 0.01,4.13 h -8.05 v 21.16 h -4.85 v -21.15 h -7.73 l 0.11,-4.13 h 20.51"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ <path
+ id="path36-5"
+ class="st1"
+ d="m 172.67452,428.30274 h 3.35 c 1.69,-0.01 3.34,1.19 3.34,2.9 0,2.87 -3.23,3.3 -3.23,3.3 l -3.46,0.02 z m -4.82,-4.1 v 25.3 h 4.82 v -10.89 h 3.2 l 5.59,10.89 h 5.5 l -6.67,-12.2 c 2.64,-1.18 4.01,-3.26 4.01,-6.22 0,-4.94 -4.33,-6.88 -9.09,-6.88 h -7.36 v 0"
+ style="fill:#ffffff;stroke:none;stroke-width:0.238399;stroke-opacity:1" />
+ </g>
+ </g>
+ <g
+ id="g72820">
+ <rect
+ style="fill:#99c1f1;fill-opacity:1;fill-rule:evenodd;stroke:#62a0ea;stroke-width:2;stroke-opacity:1"
+ id="rect917-2-4-5"
+ width="120"
+ height="69.017166"
+ x="100"
+ y="120.00001"
+ ry="3.4599047" />
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.5687px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="155.10774"
+ y="150.4942"
+ id="text1185-3-5-5-9"
+ transform="scale(1.0176559,0.98265042)"><tspan
+ sodipodi:role="line"
+ x="155.10774"
+ y="150.4942"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.5687px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';text-align:center;text-anchor:middle;stroke:none;stroke-width:1px"
+ id="tspan957-6-5-9">Blue 1</tspan><tspan
+ sodipodi:role="line"
+ x="155.10774"
+ y="168.80861"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.5687px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';text-align:center;text-anchor:middle;stroke:none;stroke-width:1px"
+ id="tspan60047">box</tspan></text>
+ </g>
+ <rect
+ style="fill:#ffbe6f;fill-opacity:1;fill-rule:evenodd;stroke:#ffa348;stroke-width:2;stroke-opacity:1"
+ id="rect917-2-9"
+ width="120.00001"
+ height="69.017166"
+ x="-40"
+ y="120.00001"
+ ry="3.4599047" />
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.5687px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="20.119326"
+ y="149.15712"
+ id="text1185-3-5-5-9-4"
+ transform="scale(1.0176559,0.98265042)"><tspan
+ sodipodi:role="line"
+ x="20.119326"
+ y="149.15712"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.5687px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';text-align:center;text-anchor:middle;stroke:none;stroke-width:1px"
+ id="tspan957-6-5-9-2">Orange 1</tspan><tspan
+ sodipodi:role="line"
+ x="20.119326"
+ y="167.47153"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.5687px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans Bold';text-align:center;text-anchor:middle;stroke:none;stroke-width:1px"
+ id="tspan60047-2">box</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:42.5884px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="313.46567"
+ y="412.9321"
+ id="text3781"><tspan
+ sodipodi:role="line"
+ id="tspan3779"
+ x="313.46567"
+ y="412.9321" /></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-52.348656"
+ y="518.42615"
+ id="text1185-9-2"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-8"
+ x="-52.348656"
+ y="518.42615"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:37.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Objets</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-52.87841"
+ y="89.660812"
+ id="text1185-9-2-7"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-8-2"
+ x="-52.87841"
+ y="89.660812"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:37.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Shapes</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:37.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-52.994568"
+ y="-109.65781"
+ id="text1185-9-2-7-0"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-8-2-4"
+ x="-52.994568"
+ y="-109.65781"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:37.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Logos</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-51.052338"
+ y="248.86438"
+ id="text1185-9-2-7-3"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-8-2-8"
+ x="-51.052338"
+ y="248.86438"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:37.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Arrows</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-52.697285"
+ y="373.75641"
+ id="text1185-9-2-7-3-6"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-8-2-8-4"
+ x="-52.697285"
+ y="373.75641"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:37.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Text</tspan></text>
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-start:url(#marker5285);marker-end:url(#marker5161)"
+ d="M -40,290.00001 H 70.803508"
+ id="path5151"
+ inkscape:connector-type="polyline"
+ inkscape:connector-curvature="0" />
+ <path
+ style="fill:#ffa348;fill-rule:evenodd;stroke:#ffa348;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-start:url(#Arrow2Mstart-4);marker-end:url(#Arrow2Mend-4)"
+ d="M 99.19649,290.00001 H 210"
+ id="path5151-1"
+ inkscape:connector-type="polyline"
+ inkscape:connector-curvature="0" />
+ <path
+ style="fill:#c0bfbc;fill-rule:evenodd;stroke:#c0bfbc;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-start:url(#marker5285);marker-end:url(#marker5161)"
+ d="M 379.19649,290.00001 H 490"
+ id="path5151-1-2"
+ inkscape:connector-type="polyline"
+ inkscape:connector-curvature="0" />
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-38.034531"
+ y="429.09885"
+ id="text1185-9-7"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-2"
+ x="-38.034531"
+ y="429.09885"
+ style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans';stroke:none">Normal text</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="105.28938"
+ y="324.79022"
+ id="text1185-9-7-8"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-2-9"
+ x="105.28938"
+ y="324.79022"
+ style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans';stroke:none">Orange 1 arrow</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="255.85823"
+ y="324.95401"
+ id="text1185-9-7-8-2"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-2-9-8"
+ x="255.85823"
+ y="324.95401"
+ style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans';stroke:none">Blue 1 arrow</tspan></text>
+ <path
+ style="fill:#99c1f1;fill-rule:evenodd;stroke:#99c1f1;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-start:url(#marker4174-8);marker-end:url(#marker4286-6)"
+ d="M 239.19649,290.00001 H 350"
+ id="path5151-1-2-3"
+ inkscape:connector-type="polyline"
+ inkscape:connector-curvature="0" />
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="395.33353"
+ y="324.16251"
+ id="text1185-9-7-8-2-8"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-2-9-8-3"
+ x="395.33353"
+ y="324.16251"
+ style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans';stroke:none">Light 3 arrow</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:13.3333px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="57.50481"
+ y="428.73474"
+ id="text1185-9-7-1"><tspan
+ sodipodi:role="line"
+ id="tspan1183-1-2-2"
+ x="57.50481"
+ y="428.73474"
+ style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:13.3333px;font-family:'Liberation Sans';-inkscape-font-specification:'Liberation Sans, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;stroke:none">Label text (bold)</tspan></text>
+ <text
+ xml:space="preserve"
+ style="font-weight:bold;font-size:42.5884px;line-height:125%;font-family:'Nimbus Roman';-inkscape-font-specification:'Nimbus Roman, Bold';letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ x="-16.290483"
+ y="345.7359"
+ id="text3116"><tspan
+ sodipodi:role="line"
+ id="tspan3114"
+ x="-16.290483"
+ y="345.7359" /></text>
+ </g>
+ <style
+ type="text/css"
+ id="style1021"> .st0{fill:#4A97D2;} .st1{fill:#333333;} </style>
+</svg>
diff --git a/poky/documentation/test-manual/intro.rst b/poky/documentation/test-manual/intro.rst
index 101d283..4a3a97e 100644
--- a/poky/documentation/test-manual/intro.rst
+++ b/poky/documentation/test-manual/intro.rst
@@ -121,7 +121,7 @@
$ bitbake image -c testsdkext
- The tests utilize the ``testsdkext`` class and the ``do_testsdkext`` task.
+ The tests utilize the :ref:`testsdkext <ref-classes-testsdk>` class and the ``do_testsdkext`` task.
- *Feature Testing:* Various scenario-based tests are run through the
:ref:`OpenEmbedded Self test (oe-selftest) <ref-manual/release-process:Testing and Quality Assurance>`. We test oe-selftest on each of the main distributions
diff --git a/poky/documentation/test-manual/reproducible-builds.rst b/poky/documentation/test-manual/reproducible-builds.rst
index 349cd19..5977366 100644
--- a/poky/documentation/test-manual/reproducible-builds.rst
+++ b/poky/documentation/test-manual/reproducible-builds.rst
@@ -33,10 +33,10 @@
have been modified should change at the binary level. This would lead to much
easier and clearer bounds on where validation is needed.
-This also gives an additional benefit to the project builds themselves, our hash
-equivalence for :ref:`Shared State <overview-manual/concepts:Shared State>`
-object reuse works much more effectively when the binary output remains the
-same.
+This also gives an additional benefit to the project builds themselves, our
+:ref:`overview-manual/concepts:Hash Equivalence` for
+:ref:`overview-manual/concepts:Shared State` object reuse works much more
+effectively when the binary output remains the same.
.. note::
diff --git a/poky/documentation/what-i-wish-id-known.rst b/poky/documentation/what-i-wish-id-known.rst
index 143f9fb..dec5617 100644
--- a/poky/documentation/what-i-wish-id-known.rst
+++ b/poky/documentation/what-i-wish-id-known.rst
@@ -150,7 +150,7 @@
need, which is advantageous because you are building for small devices when
developing for embedded and IoT.
-#. **You will want to learn about and know what's packaged in rootfs.**
+#. **You will want to learn about and know what's packaged in the root filesystem.**
#. **Create your own image recipe:**
There are a number of ways to create your own image recipe. We suggest you
