meta-quanta: gbs: add xml for igps and patch/dts for u-boot
1.XML:
change the SPI speed to 19Mhz
2.U-boot:
dts/pinctrl: add GBS dts/pinctrl support
Nuvoton u-boot srcrev bump adb4ac1af3...6870e66f6b:
https://gerrit.openbmc-project.xyz/c/openbmc/meta-nuvoton/+/34756
3.modify u-boot environment partiions offset for GBS
(From meta-quanta rev: 705d71a8a0ee00f89f06c95601aa1375a440611a)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I47960d63b557f6de1c9d84b290094253f4ffba58
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
diff --git a/meta-quanta/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/UbootHeader_GBS.xml b/meta-quanta/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/UbootHeader_GBS.xml
new file mode 100644
index 0000000..b99e7e6
--- /dev/null
+++ b/meta-quanta/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/UbootHeader_GBS.xml
@@ -0,0 +1,194 @@
+<!-- SPDX-License-Identifier: GPL-2.0
+#
+# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
+#
+# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
+#--------------------------------------------------------------------------->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Bin_Ecc_Map>
+ <!-- BMC mandatory fields -->
+ <ImageProperties>
+ <BinSize>0</BinSize> <!-- If 0 the binary size will be calculated by the tool -->
+ <PadValue>0xFF</PadValue> <!-- Byte value to pad the empty areas, default is 0 -->
+ </ImageProperties>
+
+ <BinField>
+ <!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
+ uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
+ <name>StartTag</name> <!-- name of field -->
+ <config>
+ <offset>0</offset> <!-- offset in the header -->
+ <size>0x8</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Code destination address, 32-bit aligned: for u-boot should be 0x80005000 so code will run in 0x80005200 as linked for -->
+ <name>DestAddr</name> <!-- name of field -->
+ <config>
+ <offset>0x140</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x8000</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- BootBlock or u-boot Code size -->
+ <name>CodeSize</name> <!-- name of field -->
+ <config>
+ <offset>0x144</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='FileSize'>u-boot.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- The BootBlock or u-boot binary file -->
+ <name>Code</name> <!-- name of field -->
+ <config>
+ <offset>0x200</offset> <!-- offset in the header -->
+ <size format='FileSize'>u-boot.bin</size> <!-- size in the header calculated by tool-->
+ </config>
+ <content format='FileContent'>u-boot.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
+ <name>FIU0_DRD_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x108</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x0300100B</content> <!-- content the user should fill 0x030032EB -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines the clock divide ratio from AHB to FIU0 clock -->
+ <name>FIU0_Clk_Divider</name> <!-- name of field -->
+ <config>
+ <offset>0x10C</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU0 CS1 is enabled -->
+ <name>fiu0_cs1_en</name> <!-- name of field -->
+ <config>
+ <offset>0x10D</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU0 CS2 is enabled -->
+ <name>fiu0_cs2_en</name> <!-- name of field -->
+ <config>
+ <offset>0x10E</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU0 CS3 is enabled -->
+ <name>fiu0_cs3_en</name> <!-- name of field -->
+ <config>
+ <offset>0x10F</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
+ <name>FIU3_DRD_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x110</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
+ <name>FIU3_DWR_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x114</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines the clock divide ratio from AHB to FIU3 clock -->
+ <name>FIU3_Clk_Divider</name> <!-- name of field -->
+ <config>
+ <offset>0x118</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+
+ <BinField>
+ <!-- Defines if FIU3 CS1 is enabled -->
+ <name>fiu3_cs1_en</name> <!-- name of field -->
+ <config>
+ <offset>0x119</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU3 CS2 is enabled -->
+ <name>fiu3_cs2_en</name> <!-- name of field -->
+ <config>
+ <offset>0x11A</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU3 CS3 is enabled -->
+ <name>fiu3_cs3_en</name> <!-- name of field -->
+ <config>
+ <offset>0x11B</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Version (Major.Minor) -->
+ <name>Version</name> <!-- name of field -->
+ <config>
+ <offset>0x148</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by BB code to FIU0 FIU_DWR_CFG register -->
+ <name>FIU0_DWR_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x14C</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x03001102</content> <!-- content the user should fill -->
+ </BinField>
+
+
+</Bin_Ecc_Map>