poky: subtree update:23deb29c1b..c67f57c09e

Adrian Bunk (1):
      librsvg: Upgrade 2.40.20 -> 2.40.21

Alejandro Hernandez (1):
      musl: Upgrade to latest release 1.2.1

Alex Kiernan (8):
      systemd: Upgrade v245.6 -> v246
      systemd: Move musl patches to SRC_URI_MUSL
      systemd: Fix path to modules-load.d et al
      nfs-utils: Drop StandardError=syslog from systemd unit
      openssh: Drop StandardError=syslog from systemd unit
      volatile-binds: Drop StandardOutput=syslog from systemd unit
      systemd: Upgrade v246 -> v246.1
      systemd: Upgrade v246.1 -> v246.2

Alexander Kanavin (16):
      sysvinit: update 2.96 -> 2.97
      kbd: update 2.2.0 -> 2.3.0
      gnu-config: update to latest revision
      go: update 1.14.4 -> 1.14.6
      meson: update 0.54.3 -> 0.55.0
      nasm: update 2.14.02 -> 2.15.03
      glib-2.0: correct build with latest meson
      rsync: update 3.2.1 -> 3.2.2
      vala: update 0.48.6 -> 0.48.7
      logrotate: update 3.16.0 -> 3.17.0
      mesa: update 20.1.2 -> 20.1.4
      libcap: update 2.36 -> 2.41
      net-tools: fix upstream version check
      meson.bbclass: add a cups-config entry
      oeqa: write @OETestTag content into json test reports for each case
      libhandy: upstream has moved to gnome

Alistair Francis (1):
      binutils: Remove RISC-V PIE patch

Andrei Gherzan (2):
      initscripts: Fix various shellcheck warnings in populate-volatile.sh
      initscripts: Fix populate-volatile.sh bug when file/dir exists

Anuj Mittal (4):
      harfbuzz: upgrade 2.6.8 -> 2.7.1
      sqlite3: upgrade 3.32.3 -> 3.33.0
      stress-ng: upgrade 0.11.17 -> 0.11.18
      x264: upgrade to latest revision

Armin Kuster (1):
      glibc: Secruity fix for CVE-2020-6096

Bruce Ashfield (25):
      linux-yocto/5.4: update to v5.4.53
      linux-yocto/5.4: fix perf build with binutils 2.35
      kernel/yocto: allow dangling KERNEL_FEATURES
      linux-yocto/5.4: update to v5.4.54
      systemtap: update to 4.3 latest
      kernel-devsrc: fix x86 (32bit) on target module build
      lttng-modules: update to 2.12.2 (fixes v5.8+ builds)
      yocto-bsps: update reference BSPs to 5.4.54
      kernel-yocto: enhance configuration queue analysis capabilities
      strace: update to 5.8 (fix build against v5.8 uapi headers)
      linux-yocto-rt/5.4: update to rt32
      linux-yocto/5.4: update to v5.4.56
      linux-yocto/5.4: update to v5.4.57
      kernel-yocto: set cwd before querying the meta data dir
      kernel-yocto: make # is not set matching more precise
      kernel-yocto: split meta data gathering into patch and config phases
      make-mod-scripts: add HOSTCXX definitions and gmp-native dependency
      kernel-devsrc: fix on target modules prepare for ARM
      kernel-devsrc: 5.8 + gcc10 require gcc-plugins + libmpc-dev
      linux-yocto/5.4: update to v5.4.58
      linux-yocto/5.4: perf cs-etm: Move definition of 'traceid_list' global variable from header file
      libc-headers: update to v5.8
      linux-yocto: introduce 5.8 reference kernel
      kernel-yocto/5.8: add gmp-native dependency
      linux-yocto/5.8: update to v5.8.1

Chandana kalluri (1):
      qemu.inc: Use virtual/libgl instead of mesa

Changhyeok Bae (2):
      iproute2: upgrade 5.7.0 -> 5.8.0
      ethtool: upgrade 5.7 -> 5.8

Changqing Li (5):
      layer.conf: fix adwaita-icon-theme signature change problem
      gtk-icon-cache.bbclass: add features_check
      gcc-runtime.inc: fix m32 compile fail with x86-64 compiler
      libffi: fix multilib header conflict
      gpgme: fix multilib header conflict

Chen Qi (3):
      grub: set CVE_PRODUCT to grub2
      runqemu: fix permission check of /dev/vhost-net
      fribidi: extend CVE_PRODUCT to include fribidi

Chris Laplante (11):
      lib/oe/log_colorizer.py: add LogColorizerProxyProgressHandler
      bitbake: build: print traceback if progress handler can't be created
      bitbake: build: create_progress_handler: fix calling 'get' on NoneType
      bitbake: progress: modernize syntax, format
      bitbake: progress: fix hypothetical NameError if 'progress' isn't set
      bitbake: progress: filter ANSI escape codes before looking for progress text
      bitbake: tests/color: add test suite for ANSI color code filtering
      bitbake: data: emit filename/lineno information for shell functions
      bitbake: build: print a backtrace when a Bash shell function fails
      bitbake: build: print a backtrace with the original metadata locations of Bash shell funcs
      bitbake: build: make shell traps less chatty when 'bitbake -v' is used

Dan Callaghan (1):
      stress-ng: create a symlink for /usr/bin/stress

Daniel Ammann (1):
      wic: fix typo

Daniel Gomez (1):
      allarch: Add missing allarch ttf-bitstream-vera

Diego Sueiro (1):
      cml1: Add the option to choose the .config root dir

Dmitry Baryshkov (3):
      mesa: enable freedreno Vulkan driver if freedreno is enabled
      arch-armv8-2a.inc: add tune include for armv8.2a
      tune-cortexa55.inc: switch to using armv8.2a include file

Fredrik Gustafsson (13):
      package_manager: Move to package_manager/__init__.py
      rpm: Move manifest to its own subdir
      ipk: Move ipk manifest to its own subdir
      deb: Move deb manifest to its own subdir
      rpm: Move rootfs to its own dir
      ipk: Move rootfs to its own dir
      deb: Move rootfs to its own dir
      rpm: Move sdk to its own dir
      ipk: Move sdk to its own dir
      deb: Move sdk to its own dir
      rpm: Move package manager to its own dir
      ipk: Move package manager to its own dir
      deb: Move package manager to its own dir

Guillaume Champagne (1):
      weston: add missing packageconfigs

Jeremy Puhlman (1):
      gobject-introspection: disable scanner caching in install

Joe Slater (3):
      libdnf: allow reproducible binary builds
      gconf: use python3
      gcr: make sure gcr-oids.h is generated

Jonathan Richardson (1):
      cortex-m0plus.inc: Add tuning for cortex M0 plus

Joshua Watt (3):
      bitbake: bitbake: command: Handle multiconfig in findSigInfo
      lib/oe/reproducible.py: Fix git HEAD check
      perl: Add check for non-arch Storable.pm file

Khasim Mohammed (2):
      wic/bootimg-efi: Add support for IMAGE_BOOT_FILES
      wic/bootimg-efi: Update docs for IMAGE_BOOT_FILES support in bootimg-efi

Khem Raj (23):
      qemumips: Use 34Kf CPU emulation
      libunwind: Backport a fix for -fno-common option to compile
      dhcp: Use -fcommon compiler option
      inetutils: Fix build with -fno-common
      libomxil: Use -fcommon compiler option
      kexec-tools: Fix build with -fno-common
      distcc: Fix build with -fno-common
      libacpi: Fix build with -fno-common
      minicom: Fix build when using -fno-common
      binutils: Upgrade to 2.35 release
      xf86-video-intel: Fix build with -fno-common
      glibc: Upgrade to 2.32 release
      go: Upgrade to 1.14.7
      webkitgtk: Upgrade to 2.28.4
      kexec-tools: Fix additional duplicate symbols on aarch64/x86_64 builds
      gcc: Upgrade to 10.2.0
      buildcpio.py: Apply patch to fix build with -fno-common
      buildgalculator: Patch to fix build with -fno-common
      localedef: Update to include floatn.h fix
      xserver-xorg: Fix build with -fno-common/mips
      binutils: Let crosssdk gold linker generate 4096 btyes long .interp section
      gcc-cross-canadian: Correct the regexp to delete versioned gcc binary
      curl: Upgrade to 7.72.0

Konrad Weihmann (2):
      rootfs-post: remove traling blanks from tasks
      cve-update: handle baseMetricV2 as optional

Lee Chee Yang (4):
      buildhistory: use pid for temporary txt file name
      checklayer: check layer in BBLAYERS before test
      ghostscript: fix CVE-2020-15900
      qemu : fix CVE-2020-15863

Mark Hatle (1):
      package.bbclass: Sort shlib2 output for hash equivalency

Martin Jansa (2):
      net-tools: upgrade to latest revision in upstream repo instead of old debian snapshot
      perf: backport a fix for confusing non-fatal error

Matt Madison (1):
      cogl-1.0: correct X11 dependencies

Matthew (3):
      ltp: remove --with-power-management-testsuite from EXTRA_OECONF
      ltp: remove OOM tests from runtest/mm
      ltp: make copyFrom scp command non-fatal

Mikko Rapeli (2):
      alsa-topology-conf: use ${datadir} in do_install()
      alsa-ucm-conf: use ${datadir} in do_install()

Ming Liu (3):
      conf/machine: set UBOOT_MACHINE for qemumips and qemumips64
      multilib.conf: add u-boot to NON_MULTILIB_RECIPES
      libubootenv: uprev to v0.3

Mingli Yu (2):
      ccache: Upgrade to 3.7.11
      Revert "python3: define a profile directory path"

Naoto Yamaguchi (1):
      patch.py: Change to more strictly fuzz detection

Nathan Rossi (4):
      libexif: Enable native and nativesdk
      cmake.bbclass: Rework compiler program variables for allarch
      python3: Improve handling of python3 manifest generation
      python3-manifest.json: Updates

Oleksandr Kravchuk (9):
      python3-setuptools: update to 49.2.0
      bash-completion: update to 2.11
      python3: update to 3.8.5
      re2c: update to 2.0
      diffoscope: update to 153
      json-c: update to 0.15
      git: update 2.28.0
      libwpe: update to 1.7.1
      python3-setuptools: update to 49.3.1

Richard Purdie (20):
      perl: Avoid race continually rebuilding miniperl
      gcc: Fix mangled patch
      bitbake: server/process: Fix UI first connection tracking
      bitbake: server/process: Account for xmlrpc connections
      Revert "lib/oe/log_colorizer.py: add LogColorizerProxyProgressHandler"
      lib/package_manager: Fix missing imports
      populate_sdk_ext: Ensure buildtools doesn't corrupt OECORE_NATIVE_SYSROOT
      buildtools: Handle generic environment setup injection
      uninative: Handle PREMIRRORS generically
      maintainers: Update entries for Mark Hatle
      gcr: Fix patch Upstream-Status from v2 patch
      bitbake: server/process: Remove pointless process forking
      bitbake: server/process: Simplfy idle callback handler function
      bitbake: server/process: Pass timeout/xmlrpc parameters directly to the server
      bitbake: server/process: Add extra logfile flushing
      packagefeed-stability: Remove as obsolete
      build-compare: Drop recipe
      qemu: Upgrade 5.0.0 -> 5.1.0
      selftest/tinfoil: Increase wait event timeout
      lttng-tools: upgrade 2.12.1 -> 2.12.2

Ross Burton (3):
      popt: upgrade to 1.18
      conf/machine: set UBOOT_MACHINE for qemuarm and qemuarm64
      gcc: backport a fix for out-of-line atomics on aarch64

TeohJayShen (2):
      oeqa/manual/bsp-hw.json : remove shutdown_system test
      oeqa/manual/bsp-hw.json : remove X_server_can_start_up_with_runlevel_5_boot test

Trevor Gamblin (1):
      llvm: upgrade 9.0.1 -> 10.0.1

Tyler Hicks (1):
      kernel-devicetree: Fix intermittent build failures caused by DTB builds

Usama Arif (3):
      kernel-fitimage: build configuration for image tree when dtb is not present
      oeqa/selftest/imagefeatures: Add testcase for fitImage
      ref-manual: Add documentation for kernel-fitimage

Vasyl Vavrychuk (1):
      runqemu: Check gtk or sdl option is passed together with gl or gl-es options.

Yi Zhao (1):
      pbzip2: extend for nativesdk

Zhang Qiang (1):
      kernel.bbclass: Configuration for environment with HOSTCXX

hongxu (1):
      nativesdk-rpm: adjust RPM_CONFIGDIR paths dynamically

zangrc (8):
      libevdev:upgrade 1.9.0 -> 1.9.1
      mpg123:upgrade 1.26.2 -> 1.26.3
      flex: Refresh patch
      stress-ng:upgrade 0.11.15 -> 0.11.17
      sudo:upgrade 1.9.1 -> 1.9.2
      libcap: Upgrade 2.41 -> 2.42
      libinput: Upgrade 1.15.6 -> 1.16.0
      python3-setuptools: Upgrade 49.2.0 -> 49.2.1

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ic7fa1e8484c1c7722a70c75608aa4ab21fa7d755
diff --git a/poky/meta/recipes-gnome/gcr/gcr/0001-meson-Make-sure-gcr-oids.h-is-built.patch b/poky/meta/recipes-gnome/gcr/gcr/0001-meson-Make-sure-gcr-oids.h-is-built.patch
new file mode 100644
index 0000000..4bf5bfb
--- /dev/null
+++ b/poky/meta/recipes-gnome/gcr/gcr/0001-meson-Make-sure-gcr-oids.h-is-built.patch
@@ -0,0 +1,36 @@
+From 9fca6ae0aa7355c27d0922c561b9fbe18dde5b3d Mon Sep 17 00:00:00 2001
+From: Niels De Graef <nielsdegraef@gmail.com>
+Date: Fri, 19 Jun 2020 22:37:31 +0200
+Subject: [PATCH 1/1] meson: Make sure gcr-oids.h is built
+
+Fixes https://gitlab.gnome.org/GNOME/gcr/-/issues/48
+---
+ gcr/meson.build | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- end of original header ---
+
+Upstream-Status: Backport  [https://github.com/GNOME/gcr.git]
+
+Signed-off-by: Joe Slater <joe.slater@windriver.com>
+
+---
+diff --git a/gcr/meson.build b/gcr/meson.build
+index 199452f..06c3a63 100644
+--- a/gcr/meson.build
++++ b/gcr/meson.build
+@@ -178,7 +178,10 @@ endif
+ gcr_base_dep = declare_dependency(
+   link_with: gcr_base_lib,
+   include_directories: include_directories('..'),
+-  sources: gcr_enums_gen[1], # Make sure gcr-enum-types-base.h can be included
++  sources: [
++    gcr_enums_gen[1],
++    gcr_oids[1],
++  ],
+ )
+ 
+ if get_option('introspection')
+-- 
+2.7.4
+
diff --git a/poky/meta/recipes-gnome/gcr/gcr_3.36.0.bb b/poky/meta/recipes-gnome/gcr/gcr_3.36.0.bb
index d5a88df..ff455a6 100644
--- a/poky/meta/recipes-gnome/gcr/gcr_3.36.0.bb
+++ b/poky/meta/recipes-gnome/gcr/gcr_3.36.0.bb
@@ -18,6 +18,8 @@
 REQUIRED_DISTRO_FEATURES = "x11"
 
 SRC_URI += " file://0001-meson.build-correctly-set-internal-vapi-dependencies.patch"
+SRC_URI += " file://0001-meson-Make-sure-gcr-oids.h-is-built.patch"
+
 SRC_URI[archive.md5sum] = "adc65563b6b458507b9a578a8b68fb61"
 SRC_URI[archive.sha256sum] = "aaf9bed017a2263c6145c89a1a84178f9f40f238426463e4ae486694ef5f6601"
 
diff --git a/poky/meta/recipes-gnome/gnome/gconf/python3.patch b/poky/meta/recipes-gnome/gnome/gconf/python3.patch
new file mode 100644
index 0000000..7c022a2
--- /dev/null
+++ b/poky/meta/recipes-gnome/gnome/gconf/python3.patch
@@ -0,0 +1,60 @@
+gconf: use python3
+
+Convert gsettings-schema-convert to use python3.
+
+Upstream-Status: Inappropriate [gconf is deprecated]
+
+Signed-off-by: Joe Slater <joe.slater@windriver.com>
+
+
+--- a/gsettings/gsettings-schema-convert
++++ b/gsettings/gsettings-schema-convert
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+ # vim: set ts=4 sw=4 et: coding=UTF-8
+ #
+ # Copyright (c) 2010, Novell, Inc.
+@@ -603,7 +603,7 @@ class SimpleSchemaParser:
+             for line in lines:
+                 current_line_nb += 1
+                 self.parse_line(line)
+-        except GSettingsSchemaConvertException, e:
++        except GSettingsSchemaConvertException as e:
+             raise GSettingsSchemaConvertException('%s:%s: %s' % (os.path.basename(self.file), current_line_nb, e))
+ 
+         return self.root
+@@ -1095,7 +1095,7 @@ def main(args):
+             try:
+                 parser = GConfSchemaParser(argfile, options.gettext_domain, options.schema_id, options.keep_underscores)
+                 schema_root = parser.parse()
+-            except SyntaxError, e:
++            except SyntaxError as e:
+                 raise GSettingsSchemaConvertException('\'%s\' does not look like a valid gconf schema file: %s' % (argfile, e))
+         else:
+             # autodetect if file is XML or not
+@@ -1104,7 +1104,7 @@ def main(args):
+                 schema_root = parser.parse()
+                 if not options.simple and not options.xml:
+                     options.simple = True
+-            except SyntaxError, e:
++            except SyntaxError as e:
+                 parser = SimpleSchemaParser(argfile)
+                 schema_root = parser.parse()
+                 if not options.simple and not options.xml:
+@@ -1127,13 +1127,13 @@ def main(args):
+                 fout = open(options.output, 'w')
+                 fout.write(output)
+                 fout.close()
+-            except GSettingsSchemaConvertException, e:
++            except GSettingsSchemaConvertException as e:
+                 fout.close()
+                 if os.path.exists(options.output):
+                     os.unlink(options.output)
+                 raise e
+ 
+-    except GSettingsSchemaConvertException, e:
++    except GSettingsSchemaConvertException as e:
+         print >> sys.stderr, '%s' % e
+         return 1
+ 
diff --git a/poky/meta/recipes-gnome/gnome/gconf_3.2.6.bb b/poky/meta/recipes-gnome/gnome/gconf_3.2.6.bb
index b8466d4..ff36555 100644
--- a/poky/meta/recipes-gnome/gnome/gconf_3.2.6.bb
+++ b/poky/meta/recipes-gnome/gnome/gconf_3.2.6.bb
@@ -15,6 +15,7 @@
            file://remove_plus_from_invalid_characters_list.patch \
            file://unable-connect-dbus.patch \
            file://create_config_directory.patch \
+           file://python3.patch \
 "
 
 SRC_URI[archive.md5sum] = "2b16996d0e4b112856ee5c59130e822c"
@@ -52,6 +53,8 @@
                 ${datadir}/dbus-1/services/*.service \
                 ${datadir}/dbus-1/system-services/*.service \
                "
+RDEPENDS_${PN} = "python3-xml"
+
 FILES_${PN}-dev += "${datadir}/sgml/gconf/gconf-1.0.dtd"
 
 BBCLASSEXTEND = "native"
diff --git a/poky/meta/recipes-gnome/gobject-introspection/gobject-introspection_1.64.1.bb b/poky/meta/recipes-gnome/gobject-introspection/gobject-introspection_1.64.1.bb
index 7eefdd3..4d80f00 100644
--- a/poky/meta/recipes-gnome/gobject-introspection/gobject-introspection_1.64.1.bb
+++ b/poky/meta/recipes-gnome/gobject-introspection/gobject-introspection_1.64.1.bb
@@ -131,6 +131,11 @@
         export GIR_EXTRA_LIBS_PATH=$B/.libs
 }
 
+do_install_prepend() {
+        # This prevents g-ir-scanner from writing cache data to $HOME
+        export GI_SCANNER_DISABLE_CACHE=1
+}
+
 # Our wrappers need to be available system-wide, because they will be used
 # to build introspection files for all other gobject-based packages
 do_install_append_class-target() {
diff --git a/poky/meta/recipes-gnome/libhandy/libhandy_git.bb b/poky/meta/recipes-gnome/libhandy/libhandy_git.bb
index 6425894..9f74014 100644
--- a/poky/meta/recipes-gnome/libhandy/libhandy_git.bb
+++ b/poky/meta/recipes-gnome/libhandy/libhandy_git.bb
@@ -2,7 +2,7 @@
 LICENSE = "LGPLv2.1"
 LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c"
 
-SRC_URI = "git://source.puri.sm/Librem5/${BPN}.git;protocol=https"
+SRC_URI = "git://gitlab.gnome.org/GNOME/${BPN}.git;protocol=https"
 SRCREV = "7a193d7692c9c76a1a94f17c4d30b585f77d177c"
 S = "${WORKDIR}/git"
 PV = "0.0.13"
diff --git a/poky/meta/recipes-gnome/librsvg/librsvg_2.40.20.bb b/poky/meta/recipes-gnome/librsvg/librsvg_2.40.21.bb
similarity index 92%
rename from poky/meta/recipes-gnome/librsvg/librsvg_2.40.20.bb
rename to poky/meta/recipes-gnome/librsvg/librsvg_2.40.21.bb
index 337299f..acdbc1f 100644
--- a/poky/meta/recipes-gnome/librsvg/librsvg_2.40.20.bb
+++ b/poky/meta/recipes-gnome/librsvg/librsvg_2.40.21.bb
@@ -23,8 +23,7 @@
             file://0001-Remove-non-reproducible-SRCDIR.patch \
 "
 
-SRC_URI[archive.md5sum] = "4949d313b0c5d9161a5c259104af5568"
-SRC_URI[archive.sha256sum] = "cff4dd3c3b78bfe99d8fcfad3b8ba1eee3289a0823c0e118d78106be6b84c92b"
+SRC_URI[archive.sha256sum] = "f7628905f1cada84e87e2b14883ed57d8094dca3281d5bcb24ece4279e9a92ba"
 
 CACHED_CONFIGUREVARS = "ac_cv_path_GDK_PIXBUF_QUERYLOADERS=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/gdk-pixbuf-query-loaders"