diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
index 1b42819..785f915 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
@@ -13,7 +13,7 @@
 B = "${WORKDIR}/build"
 
 XILINX_RELEASE_VERSION ?= ""
-ATF_VERSION ?= "1.4"
+ATF_VERSION ?= "2.0"
 ATF_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}"
 PV = "${ATF_VERSION}${ATF_VERSION_EXTENSION}+git${SRCPV}"
 
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb
deleted file mode 100644
index 8c8a5d0..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb
+++ /dev/null
@@ -1,7 +0,0 @@
-ATF_VERSION = "1.5"
-XILINX_RELEASE_VERSION = "v2018.3"
-BRANCH ?= "master"
-SRCREV ?= "08560c36ea5b6f48b962cb4bd9a79b35bb3d95ce"
-
-include arm-trusted-firmware.inc
-
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb
new file mode 100644
index 0000000..64cbddc
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb
@@ -0,0 +1,7 @@
+ATF_VERSION = "2.0"
+XILINX_RELEASE_VERSION = "v2019.1"
+BRANCH ?= "master"
+SRCREV ?= "80d1c79007fda42d4cc0be31b185a1da5799cd4d"
+
+include arm-trusted-firmware.inc
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb
similarity index 100%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc
index 689249f..737f5f9 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc
@@ -1,6 +1,6 @@
 require recipes-bsp/u-boot/u-boot.inc
 
-DEPENDS += "bc-native dtc-native"
+DEPENDS += "bc-native dtc-native bison-native"
 
 XILINX_RELEASE_VERSION ?= ""
 UBOOT_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
similarity index 92%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
index ce8771f..7e25f87 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
@@ -1,26 +1,25 @@
-From 539838b4fe4afecd9b6874c5ac397ab7f5b343d4 Mon Sep 17 00:00:00 2001
-From: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
-Date: Tue, 10 Apr 2018 18:34:45 -0700
+From afe880f500cff7a9486379c5ad7a4f3379015a62 Mon Sep 17 00:00:00 2001
+From: Jaewon Lee <jaewon.lee@xilinx.com>
+Date: Mon, 14 Jan 2019 11:30:56 -0800
 Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to
  kc705-microblazeel
 
 This is an update to earlier kc705-trd patch done by Nathan Rossi.
-Starting from v2016.1, KC705 will no longer refer to deprecated KC705
-TRD application.
 
 Change the microblaze-generic board to match the kc705-microblazeel.
 This patch is not intended for upstream and serves as an intermediate
 solution until OF support in upstream u-boot allows for easy support for
 custom microblaze boards.
 
+Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
 Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
 Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific]
 ---
  arch/microblaze/dts/microblaze-generic.dts | 590 ++++++++++++++++++++++++++++-
- board/xilinx/microblaze-generic/config.mk  |  30 +-
- configs/microblaze-generic_defconfig       |  57 ++-
- include/configs/microblaze-generic.h       | 396 ++++++++-----------
- 4 files changed, 782 insertions(+), 291 deletions(-)
+ board/xilinx/microblaze-generic/config.mk  |  28 +-
+ configs/microblaze-generic_defconfig       |  75 ++--
+ include/configs/microblaze-generic.h       | 348 ++++++++---------
+ 4 files changed, 782 insertions(+), 259 deletions(-)
 
 diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
 index 08a1396..f8e616b 100644
@@ -621,17 +620,15 @@
 +};
 +
 diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk
-index 1dee2d6..cb75fde 100644
+index a953977..cb75fde 100644
 --- a/board/xilinx/microblaze-generic/config.mk
 +++ b/board/xilinx/microblaze-generic/config.mk
-@@ -1,20 +1,10 @@
+@@ -1,18 +1,10 @@
+-# SPDX-License-Identifier: GPL-2.0+
 -#
 -# (C) Copyright 2007 - 2016 Michal Simek
 -#
 -# Michal SIMEK <monstr@monstr.eu>
--#
--# SPDX-License-Identifier:	GPL-2.0+
--#
 -
 -CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
 -
@@ -653,24 +650,27 @@
 +PLATFORM_CPPFLAGS += -mxl-pattern-compare
 +PLATFORM_CPPFLAGS += -mxl-multiply-high
 +PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-+PLATFORM_CPPFLAGS += -mcpu=v10.0
++PLATFORM_CPPFLAGS += -mcpu=v11.0
 +PLATFORM_CPPFLAGS += -fgnu89-inline
 diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
-index 08d99f2..bac6939 100644
+index 02e62e2..8d64be4 100644
 --- a/configs/microblaze-generic_defconfig
 +++ b/configs/microblaze-generic_defconfig
-@@ -1,5 +1,4 @@
+@@ -1,73 +1,58 @@
  CONFIG_MICROBLAZE=y
 -CONFIG_SYS_TEXT_BASE=0x29000000
  CONFIG_SPL_LIBCOMMON_SUPPORT=y
  CONFIG_SPL_LIBGENERIC_SUPPORT=y
  CONFIG_SPL_SERIAL_SUPPORT=y
-@@ -8,50 +7,50 @@ CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+-CONFIG_SPL=y
+ CONFIG_TARGET_MICROBLAZE_GENERIC=y
+ CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
  CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
  CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
  CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+-CONFIG_NR_DRAM_BANKS=1
 +CONFIG_SYS_TEXT_BASE=0x80400000
- CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
++CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
  CONFIG_FIT=y
  CONFIG_FIT_VERBOSE=y
 -CONFIG_BOOTDELAY=-1
@@ -678,13 +678,14 @@
 -CONFIG_BOOTARGS="root=romfs"
 +CONFIG_BOOTDELAY=4
  CONFIG_SYS_CONSOLE_IS_IN_ENV=y
--CONFIG_SPL=y
+-CONFIG_DISPLAY_BOARDINFO=y
 -CONFIG_SPL_BOARD_INIT=y
 -CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  CONFIG_SPL_NOR_SUPPORT=y
  CONFIG_SPL_OS_BOOT=y
  CONFIG_SYS_OS_BASE=0x2c060000
  CONFIG_HUSH_PARSER=y
+-# CONFIG_AUTO_COMPLETE is not set
 -CONFIG_SYS_PROMPT="U-Boot-mONStR> "
 -CONFIG_CMD_IMLS=y
 -CONFIG_CMD_SPL=y
@@ -693,50 +694,65 @@
 -CONFIG_CMD_GPIO=y
  CONFIG_CMD_SAVES=y
  # CONFIG_CMD_SETEXPR is not set
--CONFIG_CMD_TFTPPUT=y
 +CONFIG_SYS_ENET=y
 +CONFIG_NET=y
 +CONFIG_NETDEVICES=y
 +CONFIG_CMD_NET=y
  CONFIG_CMD_DHCP=y
+-CONFIG_CMD_TFTPPUT=y
 +CONFIG_CMD_NFS=y
  CONFIG_CMD_MII=y
  CONFIG_CMD_PING=y
  CONFIG_CMD_JFFS2=y
 -CONFIG_SPL_OF_CONTROL=y
  CONFIG_OF_EMBED=y
--CONFIG_ENV_IS_IN_FLASH=y
+-CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
 -CONFIG_NETCONSOLE=y
 -CONFIG_SPL_DM=y
++CONFIG_DM_ETH=y
++CONFIG_SYS_MALLOC_F=y
++CONFIG_SYS_GENERIC_BOARD=y
++CONFIG_XILINX_AXIEMAC=y
++CONFIG_SYS_NS16550=y
++CONFIG_CMD_FLASH=y
++CONFIG_MTD_NOR_FLASH=y
++CONFIG_CMD_IMLS=y
++CONFIG_CMD_GPIO=y
+ CONFIG_DM_GPIO=y
+ CONFIG_XILINX_GPIO=y
+-CONFIG_LED=y
+-CONFIG_LED_GPIO=y
 -CONFIG_MTD_NOR_FLASH=y
+-CONFIG_MTD_DEVICE=y
+-CONFIG_FLASH_CFI_DRIVER=y
+-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+-CONFIG_FLASH_CFI_MTD=y
+-CONFIG_SYS_FLASH_PROTECTION=y
+-CONFIG_SYS_FLASH_CFI=y
 -CONFIG_PHY_ATHEROS=y
 -CONFIG_PHY_BROADCOM=y
 -CONFIG_PHY_DAVICOM=y
 -CONFIG_PHY_LXT=y
 -CONFIG_PHY_MARVELL=y
--CONFIG_PHY_MICREL=y
--CONFIG_PHY_MICREL_KSZ90X1=y
--CONFIG_PHY_NATSEMI=y
--CONFIG_PHY_REALTEK=y
--CONFIG_PHY_VITESSE=y
- CONFIG_DM_ETH=y
-+CONFIG_SYS_MALLOC_F=y
-+CONFIG_SYS_GENERIC_BOARD=y
- CONFIG_XILINX_AXIEMAC=y
--CONFIG_XILINX_EMACLITE=y
- CONFIG_SYS_NS16550=y
--CONFIG_XILINX_UARTLITE=y
-+CONFIG_CMD_FLASH=y
-+CONFIG_MTD_NOR_FLASH=y
-+CONFIG_CMD_IMLS=y
-+CONFIG_CMD_GPIO=y
 +CONFIG_CMD_TFTPPUT=y
 +CONFIG_NETCONSOLE=y
 +CONFIG_XILINX_FSL_LINKS=0
 +CONFIG_PHY_GIGE=y
 +CONFIG_ENV_IS_IN_FLASH=y
-+CONFIG_PHY_MICREL=y
-+CONFIG_PHY_MICREL_KSZ90X1=y
+ CONFIG_PHY_MICREL=y
+ CONFIG_PHY_MICREL_KSZ90X1=y
+-CONFIG_PHY_NATSEMI=y
+-CONFIG_PHY_REALTEK=y
+-CONFIG_PHY_VITESSE=y
+-CONFIG_DM_ETH=y
+-CONFIG_XILINX_AXIEMAC=y
+-CONFIG_XILINX_EMACLITE=y
+-CONFIG_SYS_NS16550=y
+-CONFIG_XILINX_UARTLITE=y
+-CONFIG_SYSRESET_GPIO=y
+-CONFIG_SYSRESET_MICROBLAZE=y
+-CONFIG_WDT=y
+-CONFIG_XILINX_TB_WATCHDOG=y
 +CONFIG_SPL_DM_SERIAL=y
 +CONFIG_SPL_OF_LIBFDT=y
 +CONFIG_PHY_XILINX=y
@@ -745,16 +761,15 @@
 +# CONFIG_BOOTARGS is not set
 +# CONFIG_USE_BOOTARGS is not set
 diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
-index 16481cb..1377c5e 100644
+index ba0952c..fd1da2b 100644
 --- a/include/configs/microblaze-generic.h
 +++ b/include/configs/microblaze-generic.h
-@@ -1,254 +1,178 @@
+@@ -1,205 +1,173 @@
+-/* SPDX-License-Identifier: GPL-2.0+ */
 -/*
 - * (C) Copyright 2007-2010 Michal Simek
 - *
 - * Michal SIMEK <monstr@monstr.eu>
-- *
-- * SPDX-License-Identifier:	GPL-2.0+
 - */
 -
  #ifndef __CONFIG_H
@@ -771,141 +786,10 @@
 -#undef	SPIFLASH
 -#undef	RAMENV	/* hold environment in flash */
 -#else
--#ifdef XILINX_SPI_FLASH_BASEADDR
--#undef	FLASH
--#define	SPIFLASH
--#undef	RAMENV	/* hold environment in flash */
--#else
 -#undef	FLASH
 -#undef	SPIFLASH
 -#define	RAMENV	/* hold environment in RAM */
 -#endif
--#endif
--
--/* uart */
--/* The following table includes the supported baudrates */
--# define CONFIG_SYS_BAUDRATE_TABLE \
--	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
--
--/* setting reset address */
--/*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
--
--/* gpio */
--#ifdef XILINX_GPIO_BASEADDR
--# define CONFIG_XILINX_GPIO
--# define CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
--#endif
--
--/* watchdog */
--#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
--# define CONFIG_WATCHDOG_BASEADDR	XILINX_WATCHDOG_BASEADDR
--# define CONFIG_WATCHDOG_IRQ		XILINX_WATCHDOG_IRQ
--# ifndef CONFIG_SPL_BUILD
--#  define CONFIG_HW_WATCHDOG
--#  define CONFIG_XILINX_TB_WATCHDOG
--# endif
--#endif
--
--#define CONFIG_SYS_MALLOC_LEN	0xC0000
--
--/* Stack location before relocation */
--#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
--					 CONFIG_SYS_MALLOC_F_LEN)
--
--/*
-- * CFI flash memory layout - Example
-- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
-- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;	  8MB
-- *
-- * SECT_SIZE = 0x20000;			128kB is one sector
-- * CONFIG_ENV_SIZE = SECT_SIZE;		128kB environment store
-- *
-- * 0x2200_0000	CONFIG_SYS_FLASH_BASE
-- *					FREE		256kB
-- * 0x2204_0000	CONFIG_ENV_ADDR
-- *					ENV_AREA	128kB
-- * 0x2206_0000
-- *					FREE
-- * 0x2280_0000	CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
-- *
-- */
--
--#ifdef FLASH
--# define CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
--# define CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
--# define CONFIG_SYS_FLASH_CFI		1
--# define CONFIG_FLASH_CFI_DRIVER	1
--/* ?empty sector */
--# define CONFIG_SYS_FLASH_EMPTY_INFO	1
--/* max number of memory banks */
--# define CONFIG_SYS_MAX_FLASH_BANKS	1
--/* max number of sectors on one chip */
--# define CONFIG_SYS_MAX_FLASH_SECT	512
--/* hardware flash protection */
--# define CONFIG_SYS_FLASH_PROTECTION
--/* use buffered writes (20x faster) */
--# define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
--# ifdef	RAMENV
--#  define CONFIG_ENV_SIZE	0x1000
--#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--
--# else	/* FLASH && !RAMENV */
--/* 128K(one sector) for env */
--#  define CONFIG_ENV_SECT_SIZE	0x20000
--#  define CONFIG_ENV_ADDR \
--			(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
--#  define CONFIG_ENV_SIZE	0x20000
--# endif /* FLASH && !RAMBOOT */
--#else /* !FLASH */
--
--#ifdef SPIFLASH
--# define CONFIG_SYS_SPI_BASE		XILINX_SPI_FLASH_BASEADDR
--# define CONFIG_SPI			1
--# define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
--# define CONFIG_SF_DEFAULT_SPEED	XILINX_SPI_FLASH_MAX_FREQ
--# define CONFIG_SF_DEFAULT_CS		XILINX_SPI_FLASH_CS
--
--# ifdef	RAMENV
--#  define CONFIG_ENV_SIZE	0x1000
--#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--
--# else	/* SPIFLASH && !RAMENV */
--#  define CONFIG_ENV_SPI_MODE		SPI_MODE_3
--#  define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
--#  define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
--/* 128K(two sectors) for env */
--#  define CONFIG_ENV_SECT_SIZE	0x10000
--#  define CONFIG_ENV_SIZE	(2 * CONFIG_ENV_SECT_SIZE)
--/* Warning: adjust the offset in respect of other flash content and size */
--#  define CONFIG_ENV_OFFSET	(128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
--# endif /* SPIFLASH && !RAMBOOT */
--#else /* !SPIFLASH */
--
--/* ENV in RAM */
--# define CONFIG_ENV_SIZE	0x1000
--# define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--#endif /* !SPIFLASH */
--#endif /* !FLASH */
--
--#if defined(XILINX_USE_ICACHE)
--# define CONFIG_ICACHE
--#else
--# undef CONFIG_ICACHE
--#endif
--
--#if defined(XILINX_USE_DCACHE)
--# define CONFIG_DCACHE
--#else
--# undef CONFIG_DCACHE
--#endif
--
--#ifndef XILINX_DCACHE_BYTE_SIZE
--#define XILINX_DCACHE_BYTE_SIZE	32768
--#endif
--
--/*
-- * BOOTP options
-- */
 +#define CONFIG_SYS_BAUDRATE_TABLE  { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
 +
 +/* processor - microblaze_0 */
@@ -957,11 +841,6 @@
 +
 +/* timer - axi_timer_0 */
 +
-+/* gpio - reset_gpio */
-+#define XILINX_GPIO_BASEADDR	0x40000000
-+#define CONFIG_SYS_GPIO_0_ADDR	0x40000000
-+#define CONFIG_XILINX_GPIO
-+
 +/* intc - microblaze_0_axi_intc */
 +
 +/* FPGA */
@@ -988,43 +867,150 @@
 +
 +/* BOOTP options */
 +#define CONFIG_BOOTP_SERVERIP
- #define CONFIG_BOOTP_BOOTFILESIZE
- #define CONFIG_BOOTP_BOOTPATH
- #define CONFIG_BOOTP_GATEWAY
- #define CONFIG_BOOTP_HOSTNAME
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
 +#define CONFIG_BOOTP_MAY_FAIL
 +#define CONFIG_BOOTP_DNS
 +#define CONFIG_BOOTP_SUBNETMASK
 +#define CONFIG_BOOTP_PXE
  
--#if defined(CONFIG_CMD_JFFS2)
--# define CONFIG_MTD_PARTITIONS
--#endif
+-/* uart */
+-/* The following table includes the supported baudrates */
+-# define CONFIG_SYS_BAUDRATE_TABLE \
+-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 -
--#if defined(CONFIG_CMD_UBI)
--# define CONFIG_MTD_PARTITIONS
--#endif
+-/* setting reset address */
+-/*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
 -
+-#define CONFIG_SYS_MALLOC_LEN	0xC0000
+-
+-/* Stack location before relocation */
+-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
+-					 CONFIG_SYS_MALLOC_F_LEN)
+-
+-/*
+- * CFI flash memory layout - Example
+- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
+- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;	  8MB
+- *
+- * SECT_SIZE = 0x20000;			128kB is one sector
+- * CONFIG_ENV_SIZE = SECT_SIZE;		128kB environment store
+- *
+- * 0x2200_0000	CONFIG_SYS_FLASH_BASE
+- *					FREE		256kB
+- * 0x2204_0000	CONFIG_ENV_ADDR
+- *					ENV_AREA	128kB
+- * 0x2206_0000
+- *					FREE
+- * 0x2280_0000	CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
+- *
+- */
+-
+-#ifdef FLASH
+-# define CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
+-# define CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
+-/* ?empty sector */
+-# define CONFIG_SYS_FLASH_EMPTY_INFO	1
+-/* max number of memory banks */
+-# define CONFIG_SYS_MAX_FLASH_BANKS	1
+-/* max number of sectors on one chip */
+-# define CONFIG_SYS_MAX_FLASH_SECT	512
+-/* hardware flash protection */
+-/* use buffered writes (20x faster) */
+-# ifdef	RAMENV
+-#  define CONFIG_ENV_SIZE	0x1000
+-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+-
+-# else	/* FLASH && !RAMENV */
+-/* 128K(one sector) for env */
+-#  define CONFIG_ENV_SECT_SIZE	0x20000
+-#  define CONFIG_ENV_ADDR \
+-			(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+-#  define CONFIG_ENV_SIZE	0x20000
+-# endif /* FLASH && !RAMBOOT */
+-#else /* !FLASH */
+-
+-#ifdef SPIFLASH
+-# define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
+-# define CONFIG_SF_DEFAULT_SPEED	XILINX_SPI_FLASH_MAX_FREQ
+-# define CONFIG_SF_DEFAULT_CS		XILINX_SPI_FLASH_CS
+-
+-# ifdef	RAMENV
+-#  define CONFIG_ENV_SIZE	0x1000
+-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+-
+-# else	/* SPIFLASH && !RAMENV */
+-#  define CONFIG_ENV_SPI_MODE		SPI_MODE_3
+-#  define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+-#  define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+-/* 128K(two sectors) for env */
+-#  define CONFIG_ENV_SECT_SIZE	0x10000
+-#  define CONFIG_ENV_SIZE	(2 * CONFIG_ENV_SECT_SIZE)
+-/* Warning: adjust the offset in respect of other flash content and size */
+-#  define CONFIG_ENV_OFFSET	(128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
+-# endif /* SPIFLASH && !RAMBOOT */
+-#else /* !SPIFLASH */
+-
+-/* ENV in RAM */
+-# define CONFIG_ENV_SIZE	0x1000
+-# define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+-#endif /* !SPIFLASH */
+-#endif /* !FLASH */
+-
+-#if defined(XILINX_USE_ICACHE)
+-# define CONFIG_ICACHE
+-#else
+-# undef CONFIG_ICACHE
+-#endif
++/*Command line configuration.*/
++#define CONFIG_CMDLINE_EDITING
++#define CONFIG_AUTO_COMPLETE
+ 
+-#if defined(XILINX_USE_DCACHE)
+-# define CONFIG_DCACHE
+-#else
+-# undef CONFIG_DCACHE
+-#endif
++/* Miscellaneous configurable options */
++#define CONFIG_SYS_CBSIZE	2048/* Console I/O Buffer Size      */
++#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
++#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+ 
+-#ifndef XILINX_DCACHE_BYTE_SIZE
+-#define XILINX_DCACHE_BYTE_SIZE	32768
+-#endif
+ 
+-/*
+- * BOOTP options
+- */
+-#define CONFIG_BOOTP_BOOTFILESIZE
++/* Use the HUSH parser */
++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+ 
 -#if defined(CONFIG_MTD_PARTITIONS)
 -/* MTD partitions */
--#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
--#define CONFIG_FLASH_CFI_MTD
--
++#define CONFIG_ENV_VARS_UBOOT_CONFIG
++#define CONFIG_ENV_OVERWRITE	/* Allow to overwrite the u-boot environment variables */
+ 
 -/* default mtd partition table */
 -#endif
--
++#define CONFIG_LMB
+ 
 -/* size of console buffer */
 -#define	CONFIG_SYS_CBSIZE	512
 -/* max number of command args */
 -#define	CONFIG_SYS_MAXARGS	15
--#define	CONFIG_SYS_LONGHELP
 -/* default load address */
 -#define	CONFIG_SYS_LOAD_ADDR	0
--
--#define	CONFIG_HOSTNAME		XILINX_BOARD_NAME
++/* FDT support */
++#define CONFIG_DISPLAY_BOARDINFO_LATE
+ 
+-#define	CONFIG_HOSTNAME		"microblaze-generic"
 -#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
--
--/* architecture dependent code */
+ 
+ /* architecture dependent code */
 -#define	CONFIG_SYS_USR_EXCEP	/* user exception */
 -
 -#define	CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot;echo"
@@ -1041,66 +1027,8 @@
 -					"setenv stdin serial\0"
 -#endif
 -
-+/*Command line configuration.*/
- #define CONFIG_CMDLINE_EDITING
-+#define CONFIG_AUTO_COMPLETE
- 
 -/* Enable flat device tree support */
 -#define CONFIG_LMB		1
--
--#if defined(CONFIG_XILINX_AXIEMAC)
--# define CONFIG_MII		1
--# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
--#else
--# undef CONFIG_MII
--#endif
--
--/* SPL part */
--#define CONFIG_SPL_FRAMEWORK
-+/* Miscellaneous configurable options */
-+#define CONFIG_SYS_CBSIZE	2048/* Console I/O Buffer Size      */
-+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
- 
--#ifdef CONFIG_SYS_FLASH_BASE
--# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
--#endif
--
--/* for booting directly linux */
- 
--#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
--					 0x40000)
--#define CONFIG_SYS_FDT_SIZE		(16<<10)
--#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
--					 0x1000000)
-+/* Use the HUSH parser */
-+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
- 
--/* SP location before relocation, must use scratch RAM */
--/* BRAM start */
--#define CONFIG_SYS_INIT_RAM_ADDR	0x0
--/* BRAM size - will be generated */
--#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
-+#define CONFIG_ENV_VARS_UBOOT_CONFIG
-+#define CONFIG_ENV_OVERWRITE	/* Allow to overwrite the u-boot environment variables */
- 
--# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
--					 CONFIG_SYS_INIT_RAM_SIZE - \
--					 CONFIG_SYS_MALLOC_F_LEN)
-+#define CONFIG_LMB
- 
--/* Just for sure that there is a space for stack */
--#define CONFIG_SPL_STACK_SIZE		0x100
-+/* FDT support */
-+#define CONFIG_DISPLAY_BOARDINFO_LATE
- 
--#define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
- 
--#define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
--					 CONFIG_SYS_INIT_RAM_ADDR - \
--					 CONFIG_SYS_MALLOC_F_LEN - \
--					 CONFIG_SPL_STACK_SIZE)
-+/* architecture dependent code */
 +#define CONFIG_SYS_USR_EXCEP    /* user exception */
 +#define CONFIG_SYS_HZ   1000
 +
@@ -1161,8 +1089,45 @@
 +/* BOOTCOMMAND */
 +#define CONFIG_BOOTCOMMAND	"run default_bootcmd"
  
+-#if defined(CONFIG_XILINX_AXIEMAC)
+-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
+ #endif
+-
+-/* SPL part */
+-
+-#ifdef CONFIG_SYS_FLASH_BASE
+-# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
+-#endif
+-
+-/* for booting directly linux */
+-
+-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
+-					 0x40000)
+-#define CONFIG_SYS_FDT_SIZE		(16 << 10)
+-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
+-					 0x1000000)
+-
+-/* SP location before relocation, must use scratch RAM */
+-/* BRAM start */
+-#define CONFIG_SYS_INIT_RAM_ADDR	0x0
+-/* BRAM size - will be generated */
+-#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
+-
+-# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+-					 CONFIG_SYS_INIT_RAM_SIZE - \
+-					 CONFIG_SYS_MALLOC_F_LEN)
+-
+-/* Just for sure that there is a space for stack */
+-#define CONFIG_SPL_STACK_SIZE		0x100
+-
+-#define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
+-
+-#define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
+-					 CONFIG_SYS_INIT_RAM_ADDR - \
+-					 CONFIG_SYS_MALLOC_F_LEN - \
+-					 CONFIG_SPL_STACK_SIZE)
+-
 -#endif	/* __CONFIG_H */
-+#endif
 -- 
-2.7.4
+2.7.5
 
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb
similarity index 76%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb
index c87672e..3377635 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb
@@ -1,9 +1,9 @@
-UBOOT_VERSION = "v2018.01"
-XILINX_RELEASE_VERSION = "v2018.3"
+UBOOT_VERSION = "v2019.01"
+XILINX_RELEASE_VERSION = "v2019.1"
 
 UBRANCH ?= "master"
 
-SRCREV ?= "d8fc4b3b70bccf1577dab69f6ddfd4ada9a93bac"
+SRCREV ?= "d895ac5e94815d4b45dcf09d4752c5c2334a51db"
 
 include u-boot-xlnx.inc
 include u-boot-spl-zynq-init.inc
@@ -11,7 +11,7 @@
 SRC_URI_append_kc705-microblazeel = " file://microblaze-kc705-Convert-microblaze-generic-to-k.patch"
 
 LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://README;beginline=1;endline=6;md5=157ab8408beab40cd8ce1dc69f702a6c"
+LIC_FILES_CHKSUM = "file://README;beginline=1;endline=4;md5=744e7e3bb0c94b4b9f6b3db3bf893897"
 
 # u-boot-xlnx has support for these
 HAS_PLATFORM_INIT ?= " \
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb
new file mode 100644
index 0000000..d2eedd5
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb
@@ -0,0 +1,81 @@
+SUMMARY = "U-boot boot scripts for Xilinx devices"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+
+DEPENDS = "u-boot-mkimage-native"
+
+inherit deploy nopackages
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+COMPATIBLE_MACHINE ?= "^$"
+COMPATIBLE_MACHINE_zynqmp = "zynqmp"
+COMPATIBLE_MACHINE_zynq = "zynq"
+COMPATIBLE_MACHINE_versal = "versal"
+
+KERNELDT = "${@os.path.basename(d.getVar('KERNEL_DEVICETREE').split(' ')[0]) if d.getVar('KERNEL_DEVICETREE') else ''}"
+DEVICE_TREE_NAME ?= "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/dtb', 'device-tree', 'system.dtb', d.getVar('KERNELDT'), d)}"
+#Need to copy a rootfs.cpio.gz.u-boot as uramdisk.image.gz into boot partition
+RAMDISK_IMAGE ?= ""
+RAMDISK_IMAGE_zynq ?= "uramdisk.image.gz"
+
+KERNEL_BOOTCMD_zynqmp ?= "booti"
+KERNEL_BOOTCMD_zynq ?= "bootm"
+KERNEL_BOOTCMD_versal ?= "booti"
+
+BOOTMODE ?= "sd"
+BOOTMODE_versal ?= "qspi"
+
+SRC_URI = " \
+            file://boot.cmd.sd.zynq \
+            file://boot.cmd.sd.zynqmp \
+            file://boot.cmd.qspi.versal \
+            file://pxeboot.pxe \
+            "
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+UBOOTSCR_BASE_NAME ?= "${PN}-${PKGE}-${PKGV}-${PKGR}-${DATETIME}"
+UBOOTSCR_BASE_NAME[vardepsexclude] = "DATETIME"
+UBOOTPXE_CONFIG ?= "pxelinux.cfg"
+UBOOTPXE_CONFIG_NAME = "${UBOOTPXE_CONFIG}-${DATETIME}"
+UBOOTPXE_CONFIG_NAME[vardepsexclude] = "DATETIME"
+
+DEVICETREE_ADDRESS_zynqmp ?= "0x4000000"
+DEVICETREE_ADDRESS_zynq ?= "0x2000000"
+DEVICETREE_ADDRESS_versal ?= "0x1000"
+KERNEL_LOAD_ADDRESS_zynqmp ?= "0x80000"
+KERNEL_LOAD_ADDRESS_zynq ?= "0x2080000"
+KERNEL_LOAD_ADDRESS_versal ?= "0x80000"
+
+RAMDISK_IMAGE_ADDRESS_zynq ?= "0x4000000"
+RAMDISK_IMAGE_ADDRESS_versal ?= "0x6000000"
+
+do_configure[noexec] = "1"
+do_install[noexec] = "1"
+
+do_compile() {
+    sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
+        -e 's/@@KERNEL_LOAD_ADDRESS@@/${KERNEL_LOAD_ADDRESS}/' \
+        -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \
+        -e 's/@@DEVICETREE_ADDRESS@@/${DEVICETREE_ADDRESS}/' \
+        -e 's/@@RAMDISK_IMAGE@@/${RAMDISK_IMAGE}/' \
+        -e 's/@@RAMDISK_IMAGE_ADDRESS@@/${RAMDISK_IMAGE_ADDRESS}/' \
+        -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \
+        "${WORKDIR}/boot.cmd.${BOOTMODE}.${SOC_FAMILY}" > "${WORKDIR}/boot.cmd"
+    mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr
+    sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
+        -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \
+	"${WORKDIR}/pxeboot.pxe" > "pxeboot.pxe"
+}
+
+
+do_deploy() {
+    install -d ${DEPLOYDIR}
+    install -m 0644 boot.scr ${DEPLOYDIR}/${UBOOTSCR_BASE_NAME}.scr
+    ln -sf ${UBOOTSCR_BASE_NAME}.scr ${DEPLOYDIR}/boot.scr
+    install -d ${DEPLOYDIR}/pxeboot/${UBOOTPXE_CONFIG_NAME}
+    install -m 0644 pxeboot.pxe ${DEPLOYDIR}/pxeboot/${UBOOTPXE_CONFIG_NAME}/default
+    ln -sf pxeboot/${UBOOTPXE_CONFIG_NAME} ${DEPLOYDIR}/${UBOOTPXE_CONFIG}
+}
+
+addtask do_deploy after do_compile before do_build
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi
new file mode 100644
index 0000000..84a25d2
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi
@@ -0,0 +1 @@
+booti 0x80000 0x6000000 0x1000
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal
new file mode 100644
index 0000000..d56b7c8
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal
@@ -0,0 +1 @@
+@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd
new file mode 100644
index 0000000..67a8057
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd
@@ -0,0 +1,6 @@
+setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused
+devicetree_image=@@DEVICE_TREE_NAME@@
+fatload mmc 0 ${fdt_addr_r} ${devicetree_image}
+fatload mmc $sdbootdev:$partid  ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
+booti ${kernel_addr_r} - ${fdt_addr_r}
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq
new file mode 100644
index 0000000..f593ab4
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq
@@ -0,0 +1,4 @@
+fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@
+fatload mmc 0 @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@
+fatload mmc 0 @@RAMDISK_IMAGE_ADDRESS@@ @@RAMDISK_IMAGE@@
+@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp
new file mode 100644
index 0000000..18f82d7
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp
@@ -0,0 +1,4 @@
+setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused
+fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@
+fatload mmc $sdbootdev:$partid @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@
+@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe
new file mode 100644
index 0000000..6d7a0a9
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe
@@ -0,0 +1,3 @@
+LABEL Linux
+KERNEL @@KERNEL_IMAGETYPE@@
+FDT @@DEVICE_TREE_NAME@@