Gitiles
Code Review Sign In
gerrit.openbmc.org / stefanberger / openbmc / e495cb57515e1239e12ef2a52ff7e228f01b7bd0
commite495cb57515e1239e12ef2a52ff7e228f01b7bd0[log] [tgz]
authorMatt Spinler <spinler@us.ibm.com>Mon Feb 19 15:46:39 2018 -0600
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Wed Feb 28 00:17:15 2018 +0000
tree13dab74fff83799ae2f98bf6d3175bc15fbb3cef
parentdae4cad0ca622f98f08172814786798fc5fa55d6 [diff]
Witherspoon processor overtemp path changes

Make these changes in the phosphor-dbus-monitor rules that
run when 3 processor cores reach 115C, resulting in a system
shutdown:

* Create the same CriticalHigh error, but now store the sensor
  paths and values of the cores that went over 115 in the metadata.

* Remove the callback that makes journal entries, as the above
  change will now log which sensors/values went too high in the
  error log metadata which also shows up in the journal anyway.

* Make this condition be a oneshot, meaning it will only do the
  callbacks once as long as 3 processors are over threshold, not
  on every properties changed call by any processor.

Resolves openbmc/openbmc#2560

Change-Id: Iaa5207a80ca251c927ecb96b98c41adcb173175e
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
2 files changed
tree: 13dab74fff83799ae2f98bf6d3175bc15fbb3cef
  1. import-layers/
  2. meta-openbmc-bsp/
  3. meta-openbmc-machines/
  4. meta-phosphor/
  5. bitbake ⇨ import-layers/yocto-poky/bitbake
  6. documentation ⇨ import-layers/yocto-poky/documentation
  7. LICENSE ⇨ import-layers/yocto-poky/LICENSE
  8. meta ⇨ import-layers/yocto-poky/meta
  9. meta-poky ⇨ import-layers/yocto-poky/meta-poky
  10. meta-selftest ⇨ import-layers/yocto-poky/meta-selftest
  11. meta-skeleton ⇨ import-layers/yocto-poky/meta-skeleton
  12. meta-yocto-bsp ⇨ import-layers/yocto-poky/meta-yocto-bsp
  13. oe-init-build-env ⇨ import-layers/yocto-poky/oe-init-build-env
  14. oe-init-build-env-memres ⇨ import-layers/yocto-poky/oe-init-build-env-memres
  15. scripts ⇨ import-layers/yocto-poky/scripts
  16. .gitignore
  17. .gitreview
  18. .templateconf
  19. openbmc-env
  20. README.md
  21. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 23
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. OpenBMC has placed all known hardware targets in a standard directory structure meta-openbmc-machines/meta-[architecture]/meta-[company]/meta-[target]. You can see all of the known targets with find meta-openbmc-machines -type d -name conf. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf
Barreleyemeta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/conf
Zaiusmeta-openbmc-machines/meta-openpower/meta-ingrasys/meta-zaius/conf
Witherspoonmeta-openbmc-machines/meta-openpower/meta-ibm/meta-witherspoon/conf

As an example target Palmetto

export TEMPLATECONF=meta-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • REST Management
  • IPMI
  • SSH based SOL
  • Power and Cooling Management
  • Event Logs
  • Zeroconf discoverable
  • Sensors
  • Inventory
  • LED Management
  • Host Watchdog
  • Simulation
  • Code Update Support for multiple BMC/BIOS images
  • POWER On Chip Controller (OCC) Support

Features In Progress

  • Full IPMI 2.0 Compliance with DCMI
  • Verified Boot
  • HTML5 Java Script Web User Interface
  • BMC RAS

Features Requested but need help

  • OpenCompute Redfish Compliance
  • OpenBMC performance monitoring
  • cgroup user management and policies
  • Remote KVM
  • Remote USB
  • OpenStack Ironic Integration
  • QEMU enhancements

Finding out more

Dive deeper in to OpenBMC by opening the docs repository.

Contact