meta-ufispace: Add meta-ufispace layer and meta-ncplite machine
Iniitial submission of meta-layer and meta-machine layer.
Tested: Build and run on our machine successfully.
Change-Id: I4920d8ce6aff119ba5cbc4772d84a6377784f85d
Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
diff --git a/meta-ufispace/meta-ncplite/recipes-ncplite/leds/ncplite-led/ncplite-led.sh b/meta-ufispace/meta-ncplite/recipes-ncplite/leds/ncplite-led/ncplite-led.sh
new file mode 100644
index 0000000..35484d3
--- /dev/null
+++ b/meta-ufispace/meta-ncplite/recipes-ncplite/leds/ncplite-led/ncplite-led.sh
@@ -0,0 +1,93 @@
+#!/bin/bash -e
+
+HOST_SERVICE="xyz.openbmc_project.State.HostCondition.Gpio"
+HOST_OBJPATH="/xyz/openbmc_project/Gpios/host0"
+HOST_INTERFACE="xyz.openbmc_project.Condition.HostFirmware"
+HOST_PROPERTY="CurrentFirmwareCondition"
+
+FAN_SERVICE="xyz.openbmc_project.State.FanCtrl"
+FAN_OBJPATH="/xyz/openbmc_project/settings/fanctrl/zone1"
+FAN_INTERFACE="xyz.openbmc_project.Control.Mode"
+FAN_PROPERTY="FailSafe"
+
+PSU_SERVICE="xyz.openbmc_project.Inventory.Manager"
+PSU0_PRESENT_OBJPATH="/xyz/openbmc_project/inventory/system/chassis/motherboard/PSU0_PRSNT_L"
+PSU1_PRESENT_OBJPATH="/xyz/openbmc_project/inventory/system/chassis/motherboard/PSU1_PRSNT_L"
+PSU0_POWER_OBJPATH="/xyz/openbmc_project/inventory/system/chassis/motherboard/PSU0_POWER_OK"
+PSU1_POWER_OBJPATH="/xyz/openbmc_project/inventory/system/chassis/motherboard/PSU1_POWER_OK"
+PSU_INTERFACE="xyz.openbmc_project.Inventory.Item"
+PSU_PROPERTY="Present"
+
+CPLD_LED_offset1=0x80
+CPLD_LED_offset2=0x81
+CPLD_SYS_FAN_reg=0
+CPLD_PSU0_PSU1_reg=0
+
+while true; do
+ #System status LED
+ system_status=$(busctl get-property ${HOST_SERVICE} ${HOST_OBJPATH} ${HOST_INTERFACE} ${HOST_PROPERTY} | awk '{print $2}' | tr -d "\"" | awk -F . '{print $NF}')
+
+ if [ "${system_status}" == "Running" ]; then
+ #Solid Green
+ CPLD_SYS_reg=0x90
+ else
+ #Solid Yellow
+ CPLD_SYS_reg=0x80
+ fi
+
+ #Fan status LED
+ fan_status=$(busctl get-property ${FAN_SERVICE} ${FAN_OBJPATH} ${FAN_INTERFACE} ${FAN_PROPERTY} | awk '{print $2}')
+
+ if [ "${fan_status}" == "true" ]; then
+ #Blink Yellow
+ CPLD_FAN_reg=0xc
+ else
+ #Solid Green
+ CPLD_FAN_reg=0x9
+ fi
+
+ CPLD_SYS_FAN_reg=$((CPLD_SYS_reg | CPLD_FAN_reg))
+
+ #PSU0 status LED
+ psu0_prsnt_status=$(busctl get-property ${PSU_SERVICE} ${PSU0_PRESENT_OBJPATH} ${PSU_INTERFACE} ${PSU_PROPERTY} | awk '{print $2}')
+
+ psu0_power_status=$(busctl get-property ${PSU_SERVICE} ${PSU0_POWER_OBJPATH} ${PSU_INTERFACE} ${PSU_PROPERTY} | awk '{print $2}')
+
+ if [ "${psu0_prsnt_status}" == "true" ]; then
+ if [ "${psu0_power_status}" == "true" ]; then
+ #Solid Green
+ CPLD_PSU0_reg=0x9
+ else
+ #Blink Yellow
+ CPLD_PSU0_reg=0xc
+ fi
+ else
+ CPLD_PSU0_reg=0x0
+ fi
+
+ #PSU1 status LED
+ psu1_prsnt_status=$(busctl get-property ${PSU_SERVICE} ${PSU1_PRESENT_OBJPATH} ${PSU_INTERFACE} ${PSU_PROPERTY} | awk '{print $2}')
+
+ psu1_power_status=$(busctl get-property ${PSU_SERVICE} ${PSU1_POWER_OBJPATH} ${PSU_INTERFACE} ${PSU_PROPERTY} | awk '{print $2}')
+
+ if [ "${psu1_prsnt_status}" == "true" ]; then
+ if [ "${psu1_power_status}" == "true" ]; then
+ #Solid Green
+ CPLD_PSU1_reg=0x90
+ else
+ #Blink Yellow
+ CPLD_PSU1_reg=0xc0
+ fi
+ else
+ CPLD_PSU1_reg=0x0
+ fi
+
+ CPLD_PSU0_PSU1_reg=$((CPLD_PSU0_reg | CPLD_PSU1_reg))
+
+ i2cset -f -y 2 0x40 "${CPLD_LED_offset1}" "${CPLD_SYS_FAN_reg}" > /dev/null 2>&1
+ i2cset -f -y 2 0x40 "${CPLD_LED_offset2}" "${CPLD_PSU0_PSU1_reg}" > /dev/null 2>&1
+
+ sleep 2
+done
+
+exit 0