Gitiles
Code Review Sign In
gerrit.openbmc.org / stefanberger / openbmc / 7da6606471a12650f194bba63dccf6f449e1fbd0
commit7da6606471a12650f194bba63dccf6f449e1fbd0[log] [tgz]
authorMatthew Barth <msbarth@us.ibm.com>Tue Jan 02 15:28:29 2018 -0600
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Thu Feb 01 14:53:59 2018 +0000
treeda634ddfee725a9a37108adc63412cf473beac1e
parent4ef5f7721669ddda42fa635a8dd1357622a34a94 [diff]
wspoon: Increase watchdog timeout

Increasing the watchdog timeout to 10sec to allow dynamic fan speed
changes to continue until a BMC performance issue is resolved.

The watchdog wasn't being pinged within the original 3 seconds. This
would cause the fans to run at 100% PWM and eventually be marked
nonfunction resulting in a system being shutdown.

Temporarily, marking a fan nonfunctional when it's tach feedback speed
is above the target speed for witherspoon has been removed. This would
keep the system from being shutdown, however the fans are no longer
under dynamic speed control after the watchdog trips. Increasing the
watchdog timeout to 10sec prolongs dynamic fan speed control staying
active. If the watchdog trips, issuing a reboot will allow dynamic fan
speed control again.

Change-Id: I6e52892a2c6228fd5175dc2d279a947554423221
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
1 file changed
tree: da634ddfee725a9a37108adc63412cf473beac1e
  1. import-layers/
  2. meta-openbmc-bsp/
  3. meta-openbmc-machines/
  4. meta-phosphor/
  5. bitbake ⇨ import-layers/yocto-poky/bitbake
  6. documentation ⇨ import-layers/yocto-poky/documentation
  7. LICENSE ⇨ import-layers/yocto-poky/LICENSE
  8. meta ⇨ import-layers/yocto-poky/meta
  9. meta-poky ⇨ import-layers/yocto-poky/meta-poky
  10. meta-selftest ⇨ import-layers/yocto-poky/meta-selftest
  11. meta-skeleton ⇨ import-layers/yocto-poky/meta-skeleton
  12. meta-yocto-bsp ⇨ import-layers/yocto-poky/meta-yocto-bsp
  13. oe-init-build-env ⇨ import-layers/yocto-poky/oe-init-build-env
  14. oe-init-build-env-memres ⇨ import-layers/yocto-poky/oe-init-build-env-memres
  15. scripts ⇨ import-layers/yocto-poky/scripts
  16. .gitignore
  17. .gitreview
  18. .templateconf
  19. openbmc-env
  20. README.md
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 23
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. OpenBMC has placed all known hardware targets in a standard directory structure meta-openbmc-machines/meta-[architecture]/meta-[company]/meta-[target]. You can see all of the known targets with find meta-openbmc-machines -type d -name conf. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf
Barreleyemeta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/conf
Zaiusmeta-openbmc-machines/meta-openpower/meta-ingrasys/meta-zaius/conf
Witherspoonmeta-openbmc-machines/meta-openpower/meta-ibm/meta-witherspoon/conf

As an example target Palmetto

export TEMPLATECONF=meta-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • REST Management
  • IPMI
  • SSH based SOL
  • Power and Cooling Management
  • Event Logs
  • Zeroconf discoverable
  • Sensors
  • Inventory
  • LED Management
  • Host Watchdog
  • Simulation
  • Code Update Support for multiple BMC/BIOS images
  • POWER On Chip Controller (OCC) Support

Features In Progress

  • Full IPMI 2.0 Compliance with DCMI
  • Verified Boot
  • HTML5 Java Script Web User Interface
  • BMC RAS

Features Requested but need help

  • OpenCompute Redfish Compliance
  • OpenBMC performance monitoring
  • cgroup user management and policies
  • Remote KVM
  • Remote USB
  • OpenStack Ironic Integration
  • QEMU enhancements

Finding out more

Dive deeper in to OpenBMC by opening the docs repository.

Contact