diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/vc-p-a2197-00-versal.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/vc-p-a2197-00-versal.conf
new file mode 100644
index 0000000..f6337af
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/vc-p-a2197-00-versal.conf
@@ -0,0 +1,71 @@
+#@TYPE: Machine
+#@NAME: vc-p-a2197-versal
+##@DESCRIPTION: Machine support for vc-p-a2197 versal .
+
+require conf/machine/include/soc-versal.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-qemu.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+
+UBOOT_MACHINE ?= "xilinx_versal_virt_defconfig"
+
+SERIAL_CONSOLES ?= "115200;ttyAMA0"
+
+# Default SD image build onfiguration, use qemu-sd to pad
+IMAGE_CLASSES += "image-types-xilinx-qemu"
+IMAGE_FSTYPES += "wic.qemu-sd"
+WKS_FILES ?= "sdimage-bootpart.wks"
+
+EXTRA_IMAGEDEPENDS += " \
+   arm-trusted-firmware \
+   virtual/boot-bin \
+   virtual/bootloader \
+   virtual/psm-firmware \
+   virtual/plm \
+   u-boot-zynq-scr \
+   qemu-devicetrees \
+   virtual/cdo \
+"
+
+IMAGE_BOOT_FILES += " \
+    boot.bin \
+    system.dtb \
+    Image \
+    boot.scr \
+"
+# This machine has a QEMU model, runqemu setup:
+QB_MACHINE = "-M arm-generic-fdt"
+QB_MEM = "-m 8G"
+QB_DEFAULT_KERNEL = "none"
+QB_NETWORK_DEVICE = ""
+QB_KERNEL_CMDLINE_APPEND ?= ""
+QB_NET = "none"
+
+QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd"
+QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5"
+QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw"
+
+# Use booti 80000 6000000 4000000 to launch
+QB_OPT_APPEND ?= " -serial null -serial null -serial mon:stdio -display none"
+
+QB_OPT_APPEND_append_qemuboot-xilinx = " \
+    -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/board-versal-ps-vc-p-a2197-00.dtb \
+    -display none \
+    -net nic -net user,tftp=${DEPLOY_DIR_IMAGE} \
+    "
+# PLM instance args
+QB_PLM_OPT = " \
+    -M microblaze-fdt \
+    -device loader,file=${DEPLOY_DIR_IMAGE}/BOOT-${MACHINE}_bh.bin,addr=0xF201E000,force-raw  \
+    -device loader,addr=0xf0000000,data=0xba020004,data-len=4 \
+    -device loader,addr=0xf0000004,data=0xb800fffc,data-len=4 \
+    -device loader,file=${DEPLOY_DIR_IMAGE}/CDO/pmc_cdo.bin,addr=0xf2000000,force-raw \
+    -device loader,file=${DEPLOY_DIR_IMAGE}/plm-${MACHINE}.elf,cpu-num=1 \
+    -device loader,addr=0xF1110624,data=0x0,data-len=4 \
+    -device loader,addr=0xF1110620,data=0x1,data-len=4 \
+    -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/board-versal-pmc-vc-p-a2197-00.dtb \
+    -display none \
+    "
+QB_OPT_APPEND_append_qemuboot-xilinx = " -plm-args '${QB_PLM_OPT}'"
+