kernel: Move to 4.17
This brings the dev-4.13 development cycle to a close. By the end of the
cycle the 4.13 tree contained 236 patches.
This moves all of the 4.13 based functionality on top of a 4.17 base. We
currently have 97 patches in the tree. The reduction of 139 is mostly
due to code landing in Linus' tree, with a handful of fixes being merged
into the base patch.
The configuration is updated with newly landed drivers. In addition new
upstream security features are enabled, and legacy ATAG DTB support and
/dev/mem are removed.
Amithash Prasad (1):
ARM: dts: aspeed: Add Portwell Neptune machine
Andrew Jeffery (11):
ARM: dts: aspeed: witherspoon: Update max31785 node
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
dts: aspeed-g5: Expose VGA scratch registers
dts: aspeed-g5: Expose SuperIO scratch registers
fsi: gpio: Trace busy count
fsi: gpio: Remove unused 'id' variable
Avi Fishman (1):
ipmi: NPCM7xx KCS BMC: enable interrupt to the host
Benjamin Herrenschmidt (15):
gpio/aspeed: Set output latch before changing direction
gpio/aspeed: Use a cache of output data registers
fsi/fsi-master-gpio: Sample input data on different clock phase
fsi/fsi-master-gpio: Add "no-gpio-delays" option
fsi/fsi-master-gpio: Reduce turnaround clocks
fsi/fsi-master-gpio: Reduce dpoll clocks
fsi/fsi-master-gpio: Delay sampling of FSI data input
fsi/fsi-master-gpio: Implement CRC error recovery
fsi/fsi-master-gpio: More error handling cleanup
fsi/sbefifo: Add driver for the SBE FIFO
fsi/scom: Add mutex around FSI2PIB accesses
fsi/scom: Whitespace fixes
fsi/scom: Fixup endian annotations
fsi/scom: Add register definitions
fsi/scom: Major overhaul
Brad Bishop (1):
ARM: dts: witherspoon: Enable checkstop and cooling gpio keys
Brian Yang (1):
ARM: dts: aspeed: Add Inventec Lanyang BMC
Christopher Bostic (3):
ARM: dts: witherspoon: Add gpio keys for power supply presence
ARM: dts: fsi: Add optional master property no-scan-on-init
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (4):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
Dan Carpenter (2):
net/ncsi: prevent a couple array underflows
serial/aspeed-vuart: fix a couple mod_timer() calls
Eddie James (9):
ARM: dts: aspeed: witherspoon: set alternate boot
fsi: scom: Remove PIB reset during probe
dt-bindings: i2c: Add FSI-attached I2C master dt binding documentation
i2c: Add FSI-attached I2C master algorithm
i2c: fsi: Add port structures
i2c: fsi: Add abort and hardware reset procedures
i2c: fsi: Add transfer implementation
i2c: fsi: Add I2C master locking
i2c: fsi: Add bus recovery
Edward A. James (3):
ARM: dts: fsi: Add I2C master and ports to FSI CFAMs
drivers/fsi: Add On-Chip Controller (OCC) driver
hwmon: Add On-Chip Controller (OCC) hwmon driver
Haiyue Wang (1):
ipmi: add an NPCM7xx KCS BMC driver
Jae Hyun Yoo (1):
clk: aspeed: Fix reset bits for PCI/VGA and PECI
James Feist (1):
ARM: dts: Add S2600WF BMC Machine
Jeremy Kerr (8):
serial: Introduce UPSTAT_SYNC_FIFO for synchronised FIFOs
serial/8250: export serial8250_read_char
serial/aspeed-vuart: Implement rx throttling
serial/aspeed-vuart: Implement quick throttle mechanism
fsi: gpio: Use a mutex to protect transfers
fsi/gpio: Include command build in locked section
fsi/gpio: Use relative-addressing commands
fsi/master-gpio: Replace bit_bit lock with IRQ disable/enable
Joel Stanley (22):
clk: aspeed: Support second reset register
clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical
ARM: dts: aspeed-romulus: Enable VUART
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed: Add devices under FSI CFAM
ARM: dts: palmetto: Enable mbox and occ-hwmon nodes
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-g5: Add DAC MUX userspace control
ARM: dts: aspeed-g5: Clean up sio registers
ARM: dts: aspeed: Describe random number device
ARM: dts: aspeed: Fix hwrng register address
fsi: master-hub: Fix sparse warnings
fsi: core: Fix sparse warnings
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: ast2500-evb: Enable the GFX IP
ARM: dts: witherspoon: Enable the GFX IP
ARM: dts: romulus: Enable the GFX IP
ARM: config: aspeed: Update defconfig
Lei YU (5):
clk: aspeed: Add 24MHz fixed clock
ARM: dts: aspeed: romulus: Add w83773g temp sensor
ARM: dts: aspeed: zaius: Add pcie-e2b-present gpio key
ARM: dts: aspeed: romulus: Add id-button gpio key
ARM: dts: aspeed: Use 24MHz fixed clock for pwm
Samuel Mendoza-Jonas (2):
net/ncsi: Refactor MAC, VLAN filters
net/ncsi: Avoid GFP_KERNEL in response handler
Tali Perry (2):
dt-binding: clk: npcm750: add binding
clk: npcm7xx: add clock controller
Tomer Maimon (2):
dt-binding: pinctrl: document NPCM7xx pin controller DT bindings
pinctrl: npcm: add NPCM7xx pin control driver
Wei Yongjun (1):
clk: npcm7xx: fix return value check in npcm7xx_clk_init()
YueHaibing (1):
net: remove unnecessary genlmsg_cancel() calls
Tested: Booted Romulus, Palmetto hosts. Booted ASPEED platforms in QEMU
Change-Id: Ib6f7e68267cd66e98c0ace1132fd2d664a0fc623
Signed-off-by: Joel Stanley <joel@jms.id.au>
diff --git a/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb b/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
index 42bff8f..7aa1d4e 100644
--- a/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
+++ b/meta-openbmc-bsp/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
@@ -1,6 +1,6 @@
-KBRANCH ?= "dev-4.13"
-LINUX_VERSION ?= "4.13.16"
+KBRANCH ?= "dev-4.17"
+LINUX_VERSION ?= "4.17"
-SRCREV="aca92be80c008bceeb6fb62fd1d450b5be5d0a4f"
+SRCREV="635177a5c64fa51c04f317d61c9a642205c05750"
require linux-aspeed.inc