diff --git a/poky/documentation/migration-guides/index.rst b/poky/documentation/migration-guides/index.rst
index 4597506..ce0ca8c 100644
--- a/poky/documentation/migration-guides/index.rst
+++ b/poky/documentation/migration-guides/index.rst
@@ -12,6 +12,7 @@
 .. toctree::
 
    migration-general
+   release-4.1
    release-4.0
    release-3.4
    migration-3.3
diff --git a/poky/documentation/migration-guides/migration-1.5.rst b/poky/documentation/migration-guides/migration-1.5.rst
index 366fb00..1b78e99 100644
--- a/poky/documentation/migration-guides/migration-1.5.rst
+++ b/poky/documentation/migration-guides/migration-1.5.rst
@@ -240,7 +240,7 @@
 -----------------------
 
 A new automated image testing framework has been added through the
-:ref:`ref-classes-testimage*` classes. This
+:ref:`ref-classes-testimage` classes. This
 framework replaces the older ``imagetest-qemu`` framework.
 
 You can learn more about performing automated image tests in the
diff --git a/poky/documentation/migration-guides/migration-2.6.rst b/poky/documentation/migration-guides/migration-2.6.rst
index 32bb48b..b36eb19 100644
--- a/poky/documentation/migration-guides/migration-2.6.rst
+++ b/poky/documentation/migration-guides/migration-2.6.rst
@@ -319,7 +319,7 @@
    practices now dictate that you use the
    :term:`IMAGE_CLASSES` variable rather than the
    :term:`INHERIT` variable when you inherit the
-   :ref:`testimage <ref-classes-testimage*>` and
+   :ref:`testimage <ref-classes-testimage>` and
    :ref:`testsdk <ref-classes-testsdk>` classes used for automatic
    testing.
 
diff --git a/poky/documentation/migration-guides/migration-4.1.rst b/poky/documentation/migration-guides/migration-4.1.rst
new file mode 100644
index 0000000..bb8c6dd
--- /dev/null
+++ b/poky/documentation/migration-guides/migration-4.1.rst
@@ -0,0 +1,214 @@
+Release 4.1 (langdale)
+======================
+
+Migration notes for 4.1 (langdale)
+-----------------------------------
+
+This section provides migration information for moving to the Yocto
+Project 4.1 Release (codename "langdale") from the prior release.
+
+
+.. _migration-4.1-make-4.0:
+
+make 4.0 is now the minimum required make version
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+glibc now requires ``make`` 4.0 to build, thus it is now the version required to
+be installed on the build host. A new ``buildtools-make-tarball`` has been
+introduced to provide just make 4.0 for host distros without a current/working
+make 4.x version; if you also need other tools you can use the updated
+``buildtools-tarball``. For more information see
+:ref:`ref-manual/system-requirements:required packages for the build host`.
+
+
+.. _migration-4.1-complementary-deps:
+
+Complementary package installation ignores recommends
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When installing complementary packages (e.g. ``-dev`` and ``-dbg`` packages when
+building an SDK, or if you have added ``dev-deps`` to :term:`IMAGE_FEATURES`),
+recommends (as defined by :term:`RRECOMMENDS`) are no longer installed.
+
+If you wish to double-check the contents of your images after this change, see
+:ref:`Checking Image / SDK Changes <migration-general-buildhistory>`. If needed
+you can explicitly install items by adding them to :term:`IMAGE_INSTALL` in
+image recipes or :term:`TOOLCHAIN_TARGET_TASK` for the SDK.
+
+
+.. _migration-4.1-dev-recommends:
+
+dev dependencies are now recommends
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The default for ``${PN}-dev`` package is now to use :term:`RRECOMMENDS` instead
+of :term:`RDEPENDS` to pull in the main package. This takes advantage of a
+change to complimentary package installation to not follow :term:`RRECOMMENDS`
+(as mentioned above) and for example means an SDK for an image with both openssh
+and dropbear components will now build successfully.
+
+
+.. _migration-4.1-dropbear-sftp:
+
+dropbear now recommends openssh-sftp-server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+openssh has switched the scp client to use the sftp protocol instead of scp to
+move files. This means scp from Fedora 36 and other current distributions will
+no longer be able to move files to/from a system running dropbear with no sftp
+server installed.
+
+The sftp server from openssh is small (200kb uncompressed) and standalone, so
+adding it to the packagegroup seems to be the best way to preserve the
+functionality for user sanity. However, if you wish to avoid this dependency,
+you can either:
+
+ A. Use ``dropbear`` in :term:`IMAGE_INSTALL` instead of
+    ``packagegroup-core-ssh-dropbear`` (or ``ssh-server-dropbear`` in
+    :term:`IMAGE_FEATURES`), or
+ B. Add ``openssh-sftp-server`` to :term:`BAD_RECOMMENDATIONS`.
+
+
+.. _migration-4.1-classes-split:
+
+Classes now split by usage context
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A split directory structure has now been set up for ``.bbclass`` files - classes
+that are intended to be inherited only by recipes (e.g. ``inherit`` in a recipe
+file, :term:`IMAGE_CLASSES` or :term:`KERNEL_CLASSES`) should be in a
+``classes-recipe`` subdirectory and classes that are intended to be inherited
+globally (e.g. via ``INHERIT +=``, :term:`PACKAGE_CLASSES`, :term:`USER_CLASSES`
+or :term:`INHERIT_DISTRO`) should be in ``classes-global``. Classes in the
+existing ``classes`` subdirectory will continue to work in any context as before.
+
+Other than knowing where to look when manually browsing the class files, this is
+not likely to require any changes to your configuration. However, if in your
+configuration you were using some classes in the incorrect context, you will now
+receive an error during parsing. For example, the following in ``local.conf`` will
+now cause an error::
+
+   INHERIT += "testimage"
+
+Since :ref:`testimage <ref-classes-testimage>` is a class intended solely to
+affect image recipes, this would be correctly specified as::
+
+   IMAGE_CLASSES += "testimage"
+
+
+.. _migration-4.1-local-file-error:
+
+Missing local files in SRC_URI now triggers an error
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If a file referenced in :term:`SRC_URI` does not exist, in 4.1 this will trigger
+an error at parse time where previously this only triggered a warning. In the past
+you could ignore these warnings for example if you have multiple build
+configurations (e.g. for several different target machines) and there were recipes
+that you were not building in one of the configurations. If you have this scenario
+you will now need to conditionally add entries to :term:`SRC_URI` where they are
+valid, or use :term:`COMPATIBLE_MACHINE` / :term:`COMPATIBLE_HOST` to prevent the
+recipe from being available (and therefore avoid it being parsed) in configurations
+where the files aren't available.
+
+
+.. _migration-4.1-qa-checks:
+
+QA check changes
+~~~~~~~~~~~~~~~~
+
+- The :ref:`buildpaths <qa-check-buildpaths>` QA check is now enabled by default
+  in :term:`WARN_QA`, and thus any build system paths found in output files will
+  trigger a warning. If you see these warnings for your own recipes, for full
+  binary reproducibility you should make the necessary changes to the recipe build
+  to remove these paths. If you wish to disable the warning for a particular
+  recipe you can use :term:`INSANE_SKIP`, or for the entire build you can adjust
+  :term:`WARN_QA`. For more information, see the :ref:`buildpaths QA check
+  <qa-check-buildpaths>` section.
+
+- ``do_qa_staging`` now checks shebang length in all directories specified by
+  :term:`SYSROOT_DIRS`, since there is a maximum length defined in the kernel. For
+  native recipes which write scripts to the sysroot, if the shebang line in one of
+  these scripts is too long you will get an error. This can be skipped using
+  :term:`INSANE_SKIP` if necessary, but the best course of action is of course to
+  fix the script. There is now also a ``create_cmdline_shebang_wrapper`` function
+  that you can call e.g. from ``do_install`` (or ``do_install:append``) within a
+  recipe to create a wrapper to fix such scripts - see the ``libcheck`` recipe
+  for an example usage.
+
+
+
+Miscellaneous changes
+~~~~~~~~~~~~~~~~~~~~~
+
+- ``mount.blacklist`` has been renamed to ``mount.ignorelist`` in
+  ``udev-extraconf``. If you are customising this file via ``udev-extraconf`` then
+  you will need to update your ``udev-extraconf`` ``.bbappend`` as appropriate.
+- ``help2man-native`` has been removed from implicit sysroot dependencies. If a
+  recipe needs ``help2man-native`` it should now be explicitly added to
+  :term:`DEPENDS` within the recipe.
+- For images using systemd, the reboot watchdog timeout has been set to 60
+  seconds (from the upstream default of 10 minutes). If you wish to override this
+  you can set :term:`WATCHDOG_TIMEOUT` to the desired timeout in seconds. Note
+  that the same :term:`WATCHDOG_TIMEOUT` variable also specifies the timeout used
+  for the ``watchdog`` tool (if that is being built).
+- The :ref:`image-buildinfo <ref-classes-image-buildinfo>` class now writes to
+  ``${sysconfdir}/buildinfo`` instead of ``${sysconfdir}/build`` by default (i.e.
+  the default value of :term:`IMAGE_BUILDINFO_FILE` has been changed). If you have
+  code that reads this from images at build or runtime you will need to update it
+  or specify your own value for :term:`IMAGE_BUILDINFO_FILE`.
+- In the :ref:`archiver <ref-classes-archiver>` class, the default
+  ``ARCHIVER_OUTDIR`` value no longer includes the :term:`MACHINE` value in order
+  to avoid the archive task running multiple times in a multiconfig setup. If you
+  have custom code that does something with the files archived by the
+  :ref:`archiver <ref-classes-archiver>` class then you may need to adjust it to
+  the new structure.
+- If you are not using `systemd` then udev is now configured to use labels
+  (``LABEL`` or ``PARTLABEL``) to set the mount point for the device. For example::
+
+    /run/media/rootfs-sda2
+
+  instead of::
+
+    /run/media/sda2
+
+- ``icu`` no longer provides the ``icu-config`` configuration tool - upstream
+  have indicated ``icu-config`` is deprecated and should no longer be used. Code
+  with references to it will need to be updated, for example to use ``pkg-config``
+  instead.
+- The ``rng-tools`` systemd service name has changed from ``rngd`` to ``rng-tools``
+- The ``largefile`` :term:`DISTRO_FEATURES` item has been removed, large file
+  support is now always enabled where it was previously optional.
+- The Python ``zoneinfo`` module is now split out to its own ``python3-zoneinfo``
+  package.
+- The :term:`PACKAGECONFIG` option to enable wpa_supplicant in the ``connman``
+  recipe has been renamed to "wpa-supplicant". If you have set PACKAGECONFIG for
+  the ``connman`` recipe to include this option you will need to update
+  your configuration. Related to this, the :term:`WIRELESS_DAEMON` variable
+  now expects the new ``wpa-supplicant`` naming and affects ``packagegroup-base``
+  as well as ``connman``.
+- The ``wpa-supplicant`` recipe no longer uses a static (and stale) ``defconfig``
+  file, instead it uses the upstream version with appropriate edits for the
+  :term:`PACKAGECONFIG`. If you are customising this file you will need to
+  update your customisations.
+- With the introduction of picobuild in
+  :ref:`python_pep517 <ref-classes-python_pep517>`, The ``PEP517_BUILD_API``
+  variable is no longer supported. If you have any references to this variable
+  you should remove them.
+
+
+.. _migration-4.1-removed-recipes:
+
+Removed recipes
+~~~~~~~~~~~~~~~
+
+The following recipes have been removed in this release:
+
+- ``alsa-utils-scripts``: merged into alsa-utils
+- ``cargo-cross-canadian``: optimised out
+- ``lzop``: obsolete, unmaintained upstream
+- ``linux-yocto (5.10)``: 5.15 and 5.19 are currently provided
+- ``rust-cross``: optimised out
+- ``rust-crosssdk``: optimised out
+- ``rust-tools-cross-canadian``: optimised out
+- ``xf86-input-keyboard``: obsolete (replaced by libinput/evdev)
diff --git a/poky/documentation/migration-guides/migration-general.rst b/poky/documentation/migration-guides/migration-general.rst
index 9eecf69..0f0408e 100644
--- a/poky/documentation/migration-guides/migration-general.rst
+++ b/poky/documentation/migration-guides/migration-general.rst
@@ -70,3 +70,36 @@
      bitbake-layers show-appends
 
 
+.. _migration-general-buildhistory:
+
+- *Checking Image / SDK Changes*:
+
+   The :ref:`buildhistory <ref-classes-buildhistory>` class can be used
+   if you wish to check the impact of changes to images / SDKs across
+   the migration (e.g. added/removed packages, added/removed files, size
+   changes etc.). To do this, follow these steps:
+
+   1. Enable buildhistory before the migration
+
+   2. Run a pre-migration build
+
+   3. Capture the buildhistory output (as specified by :term:`BUILDHISTORY_DIR`)
+      and ensure it is preserved for subsequent builds. How you would do this
+      depends on how you are running your builds - if you are doing this all on
+      one workstation in the same build directory you may not need to do
+      anything other than not deleting the buildhistory output directory. For
+      builds in a pipeline it may be more complicated.
+
+   4. Set a tag in the buildhistory output (which is a git repository) before
+      migration, to make the commit from the pre-migration build easy to find
+      as you may end up running multiple builds during the migration.
+
+   5. Perform the migration
+
+   6. Run a build
+
+   7. Check the output changes between the previously set tag and HEAD in the
+      buildhistory output using ``git diff`` or ``buildhistory-diff``.
+
+   For more information on using buildhistory, see
+   :ref:`dev-manual/common-tasks:maintaining build output quality`.
diff --git a/poky/documentation/migration-guides/release-4.1.rst b/poky/documentation/migration-guides/release-4.1.rst
new file mode 100644
index 0000000..8ebf4a4
--- /dev/null
+++ b/poky/documentation/migration-guides/release-4.1.rst
@@ -0,0 +1,7 @@
+Release 4.1 (langdale)
+======================
+
+.. toctree::
+
+   migration-4.1
+   release-notes-4.1
diff --git a/poky/documentation/migration-guides/release-notes-3.4.2.rst b/poky/documentation/migration-guides/release-notes-3.4.2.rst
index 23c4093..2812b72 100644
--- a/poky/documentation/migration-guides/release-notes-3.4.2.rst
+++ b/poky/documentation/migration-guides/release-notes-3.4.2.rst
@@ -167,7 +167,7 @@
 -  Vyacheslav Yurkov
 -  Yongxin Liu
 -  pgowda
--  wangmy
+-  Wang Mingyu
 
 Repositories / Downloads for 3.4.2
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/poky/documentation/migration-guides/release-notes-3.4.3.rst b/poky/documentation/migration-guides/release-notes-3.4.3.rst
index 5e118d9..2673abb 100644
--- a/poky/documentation/migration-guides/release-notes-3.4.3.rst
+++ b/poky/documentation/migration-guides/release-notes-3.4.3.rst
@@ -124,7 +124,7 @@
 -  Tean Cunningham
 -  Zoltán Böszörményi
 -  pgowda
--  wangmy
+-  Wang Mingyu
 
 Repositories / Downloads for 3.4.3
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/poky/documentation/migration-guides/release-notes-3.4.4.rst b/poky/documentation/migration-guides/release-notes-3.4.4.rst
index 91beba0..38e3965 100644
--- a/poky/documentation/migration-guides/release-notes-3.4.4.rst
+++ b/poky/documentation/migration-guides/release-notes-3.4.4.rst
@@ -81,8 +81,8 @@
 -  Richard Purdie
 -  Ross Burton
 -  Tim Orling
--  wangmy
--  zhengruoqin
+-  Wang Mingyu
+-  Zheng Ruoqin
 
 Repositories / Downloads for 3.4.4
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/poky/documentation/migration-guides/release-notes-4.0.1.rst b/poky/documentation/migration-guides/release-notes-4.0.1.rst
index 81da6e5..e4bfd5b 100644
--- a/poky/documentation/migration-guides/release-notes-4.0.1.rst
+++ b/poky/documentation/migration-guides/release-notes-4.0.1.rst
@@ -174,8 +174,8 @@
 -  Ross Burton
 -  Russ Dill
 -  Steve Sakoman
--  wangmy
--  zhengruoqin
+-  Wang Mingyu
+-  Zheng Ruoqin
 
 Repositories / Downloads for 4.0.1
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/poky/documentation/migration-guides/release-notes-4.0.2.rst b/poky/documentation/migration-guides/release-notes-4.0.2.rst
index cb10068..632af11 100644
--- a/poky/documentation/migration-guides/release-notes-4.0.2.rst
+++ b/poky/documentation/migration-guides/release-notes-4.0.2.rst
@@ -223,7 +223,7 @@
 -  Xiaobing Luo
 -  Yi Zhao
 -  leimaohui
--  wangmy
+-  Wang Mingyu
 
 Repositories / Downloads for Yocto-4.0.2
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/poky/documentation/migration-guides/release-notes-4.0.3.rst b/poky/documentation/migration-guides/release-notes-4.0.3.rst
index e2a212c..83e12a6 100644
--- a/poky/documentation/migration-guides/release-notes-4.0.3.rst
+++ b/poky/documentation/migration-guides/release-notes-4.0.3.rst
@@ -239,7 +239,7 @@
 -  Yue Tao
 -  gr embeter
 -  leimaohui
--  wangmy
+-  Wang Mingyu
 
 
 Repositories / Downloads for Yocto-4.0.3
diff --git a/poky/documentation/migration-guides/release-notes-4.0.4.rst b/poky/documentation/migration-guides/release-notes-4.0.4.rst
index 2623a1d..43f92ca 100644
--- a/poky/documentation/migration-guides/release-notes-4.0.4.rst
+++ b/poky/documentation/migration-guides/release-notes-4.0.4.rst
@@ -95,7 +95,7 @@
 -  linux-yocto/5.15: update genericx86* machines to v5.15.59
 -  linux-yocto/5.15: update to v5.15.62
 -  linux-yocto: Fix COMPATIBLE_MACHINE regex match
--  linux-yocto: prepend the the value with a space when append to KERNEL_EXTRA_ARGS
+-  linux-yocto: prepend the value with a space when append to KERNEL_EXTRA_ARGS
 -  lttng-modules: fix 5.19+ build
 -  lttng-modules: fix build against mips and v5.19 kernel
 -  lttng-modules: fix build for kernel 5.10.137
@@ -226,7 +226,7 @@
 -  Yongxin Liu
 -  ghassaneben
 -  pgowda
--  wangmy
+-  Wang Mingyu
 
 Repositories / Downloads for Yocto-4.0.4
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/poky/documentation/migration-guides/release-notes-4.1.rst b/poky/documentation/migration-guides/release-notes-4.1.rst
new file mode 100644
index 0000000..a2d4b3d
--- /dev/null
+++ b/poky/documentation/migration-guides/release-notes-4.1.rst
@@ -0,0 +1,705 @@
+Release notes for 4.1 (langdale)
+---------------------------------
+
+
+New Features / Enhancements in 4.1
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Linux kernel 5.19, glibc 2.36 and ~260 other recipe upgrades
+
+- ``make`` 4.0 is now the minimum make version required on the build host.
+  For host distros that do not provide it, this is included as part of the
+  ``buildtools-tarball``, and additionally a new ``buildtools-make-tarball``
+  has been introduced to provide this in particular for host distros with
+  a broken make 4.x version. For more details see
+  :ref:`ref-manual/system-requirements:required git, tar, python, make and gcc versions`.
+
+- New layer setup tooling:
+
+  - New ``scripts/oe-setup-layers`` standalone script to restore the layer
+    configuration from a json file
+  - New ``bitbake-layers create-layers-setup`` command to save the
+    layer configuration to a json file
+  - New ``bitbake-layers save-build-conf`` command to save the active build
+    configuration as a template into a layer
+
+- Rust-related enhancements:
+
+  - Support for building rust for the target
+  - Significant SDK toolchain build optimisation
+  - Support for building native components in the SDK
+  - Support ``crate://`` fetcher with :ref:`externalsrc <ref-classes-externalsrc>`
+
+- New core recipes:
+
+  - ``buildtools-make-tarball``
+  - ``icon-naming-utils`` (previously removed)
+  - ``musl-locales``
+  - ``python3-editables`` (originally in meta-python)
+  - ``python3-hatch-vcs``
+  - ``python3-hatchling`` (originally in meta-oe)
+  - ``python3-lxml`` (originally in meta-python)
+  - ``python3-pathspec`` (originally in meta-python)
+  - ``python3-picobuild``
+  - ``sato-icon-theme`` (previously removed)
+
+- CVE checking enhancements:
+
+  - New :term:`CVE_DB_UPDATE_INTERVAL` variable to allow specifying the CVE database minimum update interval (and default to once per day)
+  - Added JSON format to summary output
+  - Added support for Ignored CVEs
+  - Enable recursive CVE checking also for ``do_populate_sdk``
+  - New :term:`CVE_CHECK_SHOW_WARNINGS` variable to disable unpatched CVE warning messages
+  - The :ref:`pypi <ref-classes-pypi>` class now defaults :term:`CVE_PRODUCT` from :term:`PYPI_PACKAGE`
+  - Added current kernel CVEs to ignore list since we stay as close to the kernel stable releases as we can
+  - Optimisations to avoid dependencies on fetching
+
+- Complementary package installation (as used in SDKs and images) no longer installs recommended packages, in order to avoid conflicts
+- Dependency of -dev package on main package is now an :term:`RRECOMMENDS` and can be easily set via new :term:`DEV_PKG_DEPENDENCY` variable
+
+- Support for CPU, I/O and memory pressure regulation in BitBake
+- Pressure data gathering in ``buildstats`` and rendering in ``pybootchartgui``
+
+- New Picobuild system for lightweight Python PEP-517 build support in the :ref:`python_pep517 <ref-classes-python_pep517>` class
+
+- Many classes are now split into global and recipe contexts for better
+  validation. For more information, see
+  :ref:`Classes now split by usage context <migration-4.1-classes-split>`.
+
+-  Architecture-specific enhancements:
+
+   - arch-armv8-4a.inc: add tune include for armv8.4a
+   - tune-neoversen2: support tune-neoversen2 base on armv9a
+   - riscv: Add tunes for rv64 without compressed instructions
+   - gnu-efi: enable for riscv64
+   - shadow-securetty: allow ttyS4 for amd-snowyowl-64
+
+-  Kernel-related enhancements:
+
+   - linux-yocto/5.15: cfg/xen: Move x86 configs to separate file
+   - linux-yocto/5.15: Enabled MDIO bus config
+   - linux-yocto: Enable mdio for qemu
+   - linux-yocto/5.15: base: enable kernel crypto userspace API
+   - kern-tools: allow 'y' or 'm' to avoid config audit warnings
+   - kernel-yocto.bbclass: say what SRC_URI entry is being dropped
+   - kernel.bbclass: Do not overwrite recipe's custom postinst
+   - kmod: Enable xz support by default
+   - Run depmod(wrapper) against each compiled kernel when multiple kernels are enabled
+   - linux-yocto-tiny: enable qemuarmv5/qemuarm64
+
+-  wic Image Creator enhancements:
+
+   - Added dependencies to support erofs
+   - Added ``fspassno`` parameter to partition to allow specifying the value of the last column (``fs_passno``) in ``/etc/fstab``.
+   - bootimg-efi: added support for loading devicetree files
+   - Added ``none`` fstype for custom image (for use in conjunction with ``rawcopy``)
+
+-  SDK-related enhancements:
+
+   - :ref:`Support for using the regular build system as an SDK <sdk-manual/extensible:Setting up the Extensible SDK environment directly in a Yocto build>`
+   - :ref:`image-buildinfo <ref-classes-image-buildinfo>` class now also writes build information to SDKs
+   - New :term:`SDK_TOOLCHAIN_LANGS` variable to control support of rust / go in SDK
+   - rust-llvm: enabled nativesdk variant
+   - python3-pluggy: enabled for native/nativesdk
+
+-  QEMU/runqemu enhancements:
+
+   - qemux86-64: Allow higher tunes
+   - runqemu: display host uptime when starting
+   - runqemu: add ``QB_KERNEL_CMDLINE`` that can be set to "none" to avoid overriding kernel command line specified in dtb
+
+-  Image-related enhancements:
+
+   - New variable :term:`UBOOT_MKIMAGE_KERNEL_TYPE`
+   - New variable :term:`FIT_PAD_ALG` to control FIT image padding algorithm
+   - New :term:`KERNEL_DEPLOY_DEPEND` variable to allow disabling image dependency on deploying the kernel
+   - image_types: isolate the write of UBI configuration to a ``write_ubi_config`` function that can be easily overridden
+
+- openssh: add support for config snippet includes to ssh and sshd
+- :ref:`create-spdx <ref-classes-create-spdx>`: Add ``SPDX_PRETTY`` option
+- wpa-supplicant: build static library if not disabled via :term:`DISABLE_STATIC`
+- wpa-supplicant: package dynamic modules
+- openssl: extract legacy provider module to a separate package
+- linux-firmware: split out ath3k firmware
+- linux-firmware: add support for building snapshots
+- eudev: create static-nodes in init script
+- udev-extraconf: new :term:`MOUNT_BASE` variable allows configuring automount base directory
+- udev-extraconf/mount.sh: use partition labels in mountpoint paths
+- systemd: Set RebootWatchdogSec to 60s by default
+- systemd: systemd-systemctl: Support instance conf files during enable
+- weston.init: enable ``xwayland`` in weston.ini if ``x11`` is in :term:`DISTRO_FEATURES`
+- New ``npm_registry`` Python module to enable caching with nodejs 16+
+- :ref:`npm <ref-classes-npm>`: replaced ``npm pack`` call with ``tar czf`` for nodejs 16+ compatibility and improved ``do_configure`` performance
+- Enabled :ref:`bin_package <ref-classes-bin-package>` class to work properly in the native case
+- Enabled :ref:`buildpaths <qa-check-buildpaths>` QA check as a warning by default
+- New :term:`OVERLAYFS_ETC_EXPOSE_LOWER` to provide read-only access to the original ``/etc`` content with :ref:`overlayfs-etc <ref-classes-overlayfs-etc>`
+- New :term:`OVERLAYFS_QA_SKIP` variable to allow skipping check on :ref:`overlayfs <ref-classes-overlayfs>` mounts
+- New :term:`PACKAGECONFIG` options for individual recipes:
+
+   - apr: xsi-strerror
+   - btrfs-tools: lzo
+   - connman: iwd
+   - coreutils: openssl
+   - dropbear: enable-x11-forwarding
+   - eudev: blkid, kmod, rule-generator
+   - eudev: manpages, selinux
+   - flac: avx, ogg
+   - gnutls: fips
+   - gstreamer1.0-plugins-bad: avtp
+   - libsdl2: libusb
+   - llvm: optviewer
+   - mesa: vulkan, vulkan-beta, zink
+   - perf: bfd
+   - piglit: glx, opencl
+   - python3: editline
+   - qemu: bpf, brlapi, capstone, rdma, slirp, uring, vde
+   - rpm: readline
+   - ruby: capstone
+   - systemd: no-dns-fallback, sysext
+   - tiff: jbig
+
+- ptest enhancements in ``curl``, ``json-c``, ``libgcrypt``, ``libgpg-error``, ``libxml2``
+- ptest compile/install functions now use :term:`PARALLEL_MAKE` and :term:`PARALLEL_MAKEINST` in ptest for significant speedup
+- New :term:`TC_CXX_RUNTIME` variable to enable other layers to more easily control C++ runtime
+- Set :term:`BB_DEFAULT_UMASK` using ??= to make it easier to override
+- Set :term:`TCLIBC` and :term:`TCMODE` using ??= to make them easier to override
+- squashfs-tools: build with lzo support by default
+- insane.bbclass: make ``do_qa_staging`` check shebang length for native scripts in all :term:`SYSROOT_DIRS`
+- utils: Add ``create_cmdline_shebang_wrapper`` function to allow recipes to easily create a wrapper to fix long shebang lines
+- meson: provide relocation script and native/cross wrappers also for meson-native
+- meson.bbclass: add cython binary to cross/native toolchain config
+- New ``musl-locales`` recipe to provide a limited set of locale data for musl based systems
+- gobject-introspection: use ``OBJDUMP`` environment variable so that objdump tool can be picked up from the environment
+- The Python ``zoneinfo`` module is now split out to its own ``python3-zoneinfo`` package.
+- busybox: added devmem 128-bit support
+- vim: split xxd out into its own package
+- New :ref:`github-releases <ref-classes-github-releases>` class to consolidate version checks for github-based packages
+- ``devtool reset`` now preserves ``workspace/sources`` source trees in ``workspace/attic/sources/`` instead of leaving them in-place
+- scripts/patchreview: Add commit to stored json data
+- scripts/patchreview: Make json output human parsable
+- ``wpa-supplicant`` recipe now uses the upstream ``defconfig`` modified based upon :term:`PACKAGECONFIG` instead of a stale ``defconfig`` file
+- bitbake: build: prefix the tasks with a timestamp in the log.task_order
+- bitbake: fetch2/osc: Add support to query latest revision
+- bitbake: utils: Pass lock argument in fileslocked
+- bitbake: utils: Add enable_loopback_networking()
+
+
+Known Issues in 4.1
+~~~~~~~~~~~~~~~~~~~
+
+- The change to :ref:`migration-4.1-complementary-deps` means that images
+  built with the ``ptest-pkgs`` :term:`IMAGE_FEATURES` don’t automatically
+  install ``ptest-runner``, as that package is a recommendation of the
+  individual ``-ptest`` packages.  This will be resolved in the next point
+  release, and can be worked around by explicitly installing ``ptest-runner``
+  into the image.  Filed as :yocto_bugs:`bug 14928 </show_bug.cgi?id=14928>`.
+
+- There is a known issue with eSDKs where sstate objects may be missing,
+  resulting in packages being unavailable to install in the sysroot. This is due
+  to image generation optimisations having unintended consequences in eSDK
+  generation. This will be resolved in the next point release.  Filed as
+  :yocto_bugs:`bug 14626 </show_bug.cgi?id=14626>`, which also details the fix.
+
+- The change to :ref:`migration-4.1-classes-split` inadvertently moved the
+  :ref:`externalsrc <ref-classes-externalsrc>` class to ``meta/classes-recipe``,
+  when it is not recipe-specific and can also be used in a global context.  The
+  class will be moved back to ``meta/classes`` in the next point release.  Filed
+  as :yocto_bugs:`bug 14940 </show_bug.cgi?id=14940>`.
+
+
+Recipe License changes in 4.1
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following corrections have been made to the LICENSE values set by recipes:
+
+- alsa-state: add GPL-2.0-or-later because of alsa-state-init file
+- git: add GPL-2.0-or-later & BSD-3-Clause & MIT & BSL-1.0 & LGPL-2.1-or-later due to embedded code
+- libgcrypt: dropped GPLv3 license after upstream changes
+- linux-firmware: correct license for ar3k firmware (specific "ar3k" license)
+
+
+
+Security Fixes in 4.1
+~~~~~~~~~~~~~~~~~~~~~
+
+- bind: :cve:`2022-1183`, :cve:`2022-2795`, :cve:`2022-2881`, :cve:`2022-2906`, :cve:`2022-3080`, :cve:`2022-38178`
+- binutils: :cve:`2019-1010204`, :cve:`2022-38126`, :cve:`2022-38127`, :cve:`2022-38128`, :cve:`2022-38533`
+- busybox: :cve:`2022-30065`
+- connman: :cve:`2022-32292`, :cve:`2022-32293`
+- cups: :cve:`2022-26691`
+- e2fsprogs: :cve:`2022-1304`
+- expat: :cve:`2022-40674`
+- freetype: :cve:`2022-27404`
+- glibc: :cve:`2022-39046`
+- gnupg: :cve:`2022-34903`
+- grub2: :cve:`2021-3695`, :cve:`2021-3696`, :cve:`2021-3697`, :cve:`2022-28733`, :cve:`2022-28734`, :cve:`2022-28735`
+- inetutils: :cve:`2022-39028`
+- libtirpc: :cve:`2021-46828`
+- libxml2: :cve:`2016-3709 (ignored)`
+- libxslt: :cve:`2022-29824 (not applicable)`
+- linux-yocto/5.15: :cve:`2022-28796`
+- logrotate: :cve:`2022-1348`
+- lua: :cve:`2022-33099`
+- nasm: :cve:`2020-18974 (ignored)`
+- ncurses: :cve:`2022-29458`
+- openssl: :cve:`2022-1292`, :cve:`2022-1343`, :cve:`2022-1434`, :cve:`2022-1473`, :cve:`2022-2068`, :cve:`2022-2274`, :cve:`2022-2097`
+- python3: :cve:`2015-20107 (ignored)`
+- qemu: :cve:`2021-20255 (ignored)`, :cve:`2019-12067 (ignored)`, :cve:`2021-3507`, :cve:`2022-0216`, :cve:`2022-2962`, :cve:`2022-35414`
+- rpm: :cve:`2021-35937`, :cve:`2021-35938`, :cve:`2021-35939`
+- rsync: :cve:`2022-29154`
+- subversion: :cve:`2021-28544`, :cve:`2022-24070`
+- tiff: :cve:`2022-1210 (not applicable)`, :cve:`2022-1622`, :cve:`2022-1623 (invalid)`, :cve:`2022-2056`, :cve:`2022-2057`, :cve:`2022-2058`, :cve:`2022-2953`, :cve:`2022-34526`
+- unzip: :cve:`2022-0529`, :cve:`2022-0530`
+- vim: :cve:`2022-1381`, :cve:`2022-1420`, :cve:`2022-1621`, :cve:`2022-1629`, :cve:`2022-1674`, :cve:`2022-1733`, :cve:`2022-1735`, :cve:`2022-1769`, :cve:`2022-1771`, :cve:`2022-1785`, :cve:`2022-1796`, :cve:`2022-1927`, :cve:`2022-1942`, :cve:`2022-2257`, :cve:`2022-2264`, :cve:`2022-2284`, :cve:`2022-2285`, :cve:`2022-2286`, :cve:`2022-2287`, :cve:`2022-2816`, :cve:`2022-2817`, :cve:`2022-2819`, :cve:`2022-2845`, :cve:`2022-2849`, :cve:`2022-2862`, :cve:`2022-2874`, :cve:`2022-2889`, :cve:`2022-2980`, :cve:`2022-2946`, :cve:`2022-2982`, :cve:`2022-3099`, :cve:`2022-3134`, :cve:`2022-3234`, :cve:`2022-3278`
+- zlib: :cve:`2022-37434`
+
+
+
+
+
+Recipe Upgrades in 4.1
+~~~~~~~~~~~~~~~~~~~~~~
+
+- acpica 20211217 -> 20220331
+- adwaita-icon-theme 41.0 -> 42.0
+- alsa-lib 1.2.6.1 -> 1.2.7.2
+- alsa-plugins 1.2.6 -> 1.2.7.1
+- alsa-ucm-conf 1.2.6.3 -> 1.2.7.2
+- alsa-utils 1.2.6 -> 1.2.7
+- asciidoc 10.1.4 -> 10.2.0
+- at-spi2-core 2.42.0 -> 2.44.1
+- autoconf-archive 2022.02.11 -> 2022.09.03
+- base-passwd 3.5.29 -> 3.5.52
+- bind 9.18.5 -> 9.18.7
+- binutils 2.38 -> 2.39
+- boost 1.78.0 -> 1.80.0
+- boost-build-native 4.4.1 -> 1.80.0
+- btrfs-tools 5.16.2 -> 5.19.1
+- cargo 1.59.0 -> 1.63.0
+- ccache 4.6 -> 4.6.3
+- cmake 3.22.3 -> 3.24.0
+- cmake-native 3.22.3 -> 3.24.0
+- coreutils 9.0 -> 9.1
+- createrepo-c 0.19.0 -> 0.20.1
+- cross-localedef-native 2.35 -> 2.36
+- curl 7.82.0 -> 7.85.0
+- diffoscope 208 -> 221
+- dmidecode 3.3 -> 3.4
+- dnf 4.11.1 -> 4.14.0
+- dos2unix 7.4.2 -> 7.4.3
+- dpkg 1.21.4 -> 1.21.9
+- dropbear 2020.81 -> 2022.82
+- efibootmgr 17 -> 18
+- elfutils 0.186 -> 0.187
+- ell 0.50 -> 0.53
+- enchant2 2.3.2 -> 2.3.3
+- erofs-utils 1.4 -> 1.5
+- ethtool 5.16 -> 5.19
+- eudev 3.2.10 -> 3.2.11
+- ffmpeg 5.0.1 -> 5.1.1
+- file 5.41 -> 5.43
+- flac 1.3.4 -> 1.4.0
+- fontconfig 2.13.1 -> 2.14.0
+- freetype 2.11.1 -> 2.12.1
+- gcc 11.3.0 -> 12.2.0
+- gcompat 1.0.0+1.1+gitX (4d6a5156a6eb…) -> 1.0.0+1.1+gitX (c6921a1aa454…)
+- gdb 11.2 -> 12.1
+- ghostscript 9.55.0 -> 9.56.1
+- git 2.35.4 -> 2.37.3
+- glibc 2.35 -> 2.36
+- glslang 1.3.204.1 -> 1.3.216.0
+- gnu-config 20211108+gitX -> 20220525+gitX
+- gnu-efi 3.0.14 -> 3.0.15
+- gnutls 3.7.4 -> 3.7.7
+- go 1.17.13 -> 1.19
+- go-helloworld 0.1 (787a929d5a0d…) -> 0.1 (2e68773dfca0…)
+- gpgme 1.17.1 -> 1.18.0
+- gptfdisk 1.0.8 -> 1.0.9
+- harfbuzz 4.0.1 -> 5.1.0
+- hdparm 9.63 -> 9.64
+- help2man 1.49.1 -> 1.49.2
+- hwlatdetect 2.3 -> 2.4
+- icu 70.1 -> 71.1
+- inetutils 2.2 -> 2.3
+- init-system-helpers 1.62 -> 1.64
+- iproute2 5.17.0 -> 5.19.0
+- iptables 1.8.7 -> 1.8.8
+- iw 5.16 -> 5.19
+- json-c 0.15 -> 0.16
+- kbd 2.4.0 -> 2.5.1
+- kea 2.0.2 -> 2.2.0
+- kexec-tools 2.0.23 -> 2.0.25
+- kmod 29 -> 30
+- kmscube git (9f63f359fab1…) -> git (3bf6ee1a0233…)
+- less 600 -> 608
+- libaio 0.3.112 -> 0.3.113
+- libbsd 0.11.5 -> 0.11.6
+- libcap-ng 0.8.2 -> 0.8.3
+- libcap-ng-python 0.8.2 -> 0.8.3
+- libcgroup 2.0.2 -> 3.0.0
+- libcomps 0.1.18 -> 0.1.19
+- libdnf 0.66.0 -> 0.69.0
+- libdrm 2.4.110 -> 2.4.113
+- libevdev 1.12.1 -> 1.13.0
+- libfontenc 1.1.4 -> 1.1.6
+- libgcc 11.3.0 -> 12.2.0
+- libgcc-initial 11.3.0 -> 12.2.0
+- libgcrypt 1.9.4 -> 1.10.1
+- libgfortran 11.3.0 -> 12.2.0
+- libgit2 1.4.3 -> 1.5.0
+- libgpg-error 1.44 -> 1.45
+- libhandy 1.5.0 -> 1.6.3
+- libidn2 2.3.2 -> 2.3.3
+- libjitterentropy 3.4.0 -> 3.4.1
+- libmnl 1.0.4 -> 1.0.5
+- libnl 3.5.0 -> 3.7.0
+- libnotify 0.7.9 -> 0.8.1
+- libpipeline 1.5.5 -> 1.5.6
+- libproxy 0.4.17 -> 0.4.18
+- librepo 1.14.3 -> 1.14.5
+- librsvg 2.52.7 -> 2.54.5
+- libsdl2 2.0.20 -> 2.24.0
+- libseccomp 2.5.3 -> 2.5.4
+- libsndfile1 1.0.31 -> 1.1.0
+- libstd-rs 1.59.0 -> 1.63.0
+- libtirpc 1.3.2 -> 1.3.3
+- libubootenv 0.3.2 -> 0.3.3
+- libva 2.14.0 -> 2.15.0
+- libva-utils 2.14.0 -> 2.15.0
+- libx11 1.7.3.1 -> 1.8.1
+- libxau 1.0.9 -> 1.0.10
+- libxcb 1.14 -> 1.15
+- libxcursor 1.2.0 -> 1.2.1
+- libxcvt 0.1.1 -> 0.1.2
+- libxfont2 2.0.5 -> 2.0.6
+- libxvmc 1.0.12 -> 1.0.13
+- linux-libc-headers 5.16 -> 5.19
+- linux-yocto 5.10.143+gitX, 5.15.68+gitX -> 5.15.68+gitX, 5.19.9+gitX
+- linux-yocto-dev 5.18++gitX -> 5.19++gitX
+- linux-yocto-rt 5.10.143+gitX, 5.15.68+gitX -> 5.15.68+gitX, 5.19.9+gitX
+- linux-yocto-tiny 5.10.143+gitX, 5.15.68+gitX -> 5.15.68+gitX, 5.19.9+gitX
+- llvm 13.0.1 -> 14.0.6
+- lsof 4.94.0 -> 4.95.0
+- ltp 20220121 -> 20220527
+- lttng-tools 2.13.4 -> 2.13.8
+- lttng-ust 2.13.3 -> 2.13.4
+- mc 4.8.27 -> 4.8.28
+- mesa 22.0.3 -> 22.2.0
+- mesa-demos 8.4.0 -> 8.5.0
+- mesa-gl 22.0.3 -> 22.2.0
+- meson 0.61.3 -> 0.63.2
+- mmc-utils 0.1+gitX (b7e4d5a6ae99…) -> 0.1+gitX (d7b343fd2628…)
+- mpg123 1.29.3 -> 1.30.2
+- msmtp 1.8.20 -> 1.8.22
+- mtools 4.0.38 -> 4.0.40
+- musl 1.2.3+gitX (7a43f6fea908…) -> 1.2.3+gitX (37e18b7bf307…)
+- musl-obstack 1.1 -> 1.2
+- ncurses 6.3+20220423 (a0bc708bc695…) -> 6.3+20220423 (20db1fb41ec9…)
+- neard 0.16 -> 0.18
+- nettle 3.7.3 -> 3.8.1
+- nfs-utils 2.6.1 -> 2.6.2
+- nghttp2 1.47.0 -> 1.49.0
+- ninja 1.10.2 -> 1.11.1
+- numactl 2.0.14 -> 2.0.15
+- ofono 1.34 -> 2.0
+- opensbi 1.0 -> 1.1
+- openssh 8.9p1 -> 9.0p1
+- opkg 0.5.0 -> 0.6.0
+- ovmf edk2-stable202202 -> edk2-stable202205
+- pango 1.50.4 -> 1.50.9
+- parted 3.4 -> 3.5
+- patchelf 0.14.5 -> 0.15.0
+- pciutils 3.7.0 -> 3.8.0
+- perl 5.34.1 -> 5.36.0
+- perlcross 1.3.7 -> 1.4
+- piglit 1.0+gitrX (2f80c7cc9c02…) -> 1.0+gitrX (265896c86f90…)
+- pkgconf 1.8.0 -> 1.9.3
+- psmisc 23.4 -> 23.5
+- pulseaudio 15.0 -> 16.1
+- puzzles 0.0+gitX (c43a34fbfe43…) -> 0.0+gitX (8399cff6a3b9…)
+- python3 3.10.4 -> 3.10.6
+- python3-atomicwrites 1.4.0 -> 1.4.1
+- python3-attrs 21.4.0 -> 22.1.0
+- python3-babel 2.9.1 -> 2.10.3
+- python3-bcrypt 3.2.0 -> 3.2.2
+- python3-certifi 2021.10.8 -> 2022.9.14
+- python3-cffi 1.15.0 -> 1.15.1
+- python3-chardet 4.0.0 -> 5.0.0
+- python3-cryptography 36.0.2 -> 37.0.4
+- python3-cryptography-vectors 36.0.2 -> 37.0.4
+- python3-cython 0.29.28 -> 0.29.32
+- python3-dbusmock 0.27.3 -> 0.28.4
+- python3-docutils 0.18.1 -> 0.19
+- python3-dtschema 2022.1 -> 2022.8.3
+- python3-hypothesis 6.39.5 -> 6.54.5
+- python3-idna 3.3 -> 3.4
+- python3-imagesize 1.3.0 -> 1.4.1
+- python3-importlib-metadata 4.11.3 -> 4.12.0
+- python3-jinja2 3.1.1 -> 3.1.2
+- python3-jsonpointer 2.2 -> 2.3
+- python3-jsonschema 4.4.0 -> 4.9.1
+- python3-magic 0.4.25 -> 0.4.27
+- python3-mako 1.1.6 -> 1.2.2
+- python3-markdown 3.3.6 -> 3.4.1
+- python3-more-itertools 8.12.0 -> 8.14.0
+- python3-numpy 1.22.3 -> 1.23.3
+- python3-pbr 5.8.1 -> 5.10.0
+- python3-pip 22.0.3 -> 22.2.2
+- python3-psutil 5.9.0 -> 5.9.2
+- python3-pycryptodome 3.14.1 -> 3.15.0
+- python3-pycryptodomex 3.14.1 -> 3.15.0
+- python3-pyelftools 0.28 -> 0.29
+- python3-pygments 2.11.2 -> 2.13.0
+- python3-pygobject 3.42.0 -> 3.42.2
+- python3-pyparsing 3.0.7 -> 3.0.9
+- python3-pytest 7.1.1 -> 7.1.3
+- python3-pytest-subtests 0.7.0 -> 0.8.0
+- python3-pytz 2022.1 -> 2022.2.1
+- python3-requests 2.27.1 -> 2.28.1
+- python3-scons 4.3.0 -> 4.4.0
+- python3-semantic-version 2.9.0 -> 2.10.0
+- python3-setuptools 59.5.0 -> 65.0.2
+- python3-setuptools-scm 6.4.2 -> 7.0.5
+- python3-sphinx 4.4.0 -> 5.1.1
+- python3-sphinx-rtd-theme 0.5.0 -> 1.0.0
+- python3-typing-extensions 3.10.0.0 -> 4.3.0
+- python3-urllib3 1.26.9 -> 1.26.12
+- python3-webcolors 1.11.1 -> 1.12
+- python3-zipp 3.7.0 -> 3.8.1
+- qemu 6.2.0 -> 7.1.0
+- repo 2.22 -> 2.29.2
+- rpm 4.17.0 -> 4.18.0
+- rsync 3.2.3 -> 3.2.5
+- rt-tests 2.3 -> 2.4
+- rust 1.59.0 -> 1.63.0
+- rust-llvm 1.59.0 -> 1.63.0
+- sbc 1.5 -> 2.0
+- seatd 0.6.4 -> 0.7.0
+- shaderc 2022.1 -> 2022.2
+- shadow 4.11.1 -> 4.12.1
+- shared-mime-info 2.1 -> 2.2
+- slang 2.3.2 -> 2.3.3
+- speex 1.2.0 -> 1.2.1
+- speexdsp 1.2.0 -> 1.2.1
+- spirv-headers 1.3.204.1 -> 1.3.216.0
+- spirv-tools 1.3.204.1 -> 1.3.216.0
+- sqlite3 3.38.5 -> 3.39.3
+- squashfs-tools 4.5 -> 4.5.1
+- strace 5.16 -> 5.19
+- stress-ng 0.13.12 -> 0.14.03
+- sudo 1.9.10 -> 1.9.11p3
+- sysklogd 2.3.0 -> 2.4.4
+- sysstat 12.4.5 -> 12.6.0
+- systemd 250.5 -> 251.4
+- systemd-boot 250.5 -> 251.4
+- systemtap 4.6 -> 4.7
+- systemtap-native 4.6 -> 4.7
+- systemtap-uprobes 4.6 -> 4.7
+- sysvinit 3.01 -> 3.04
+- tiff 4.3.0 -> 4.4.0
+- tzcode-native 2022c -> 2022d
+- tzdata 2022c -> 2022d
+- u-boot 2022.01 -> 2022.07
+- u-boot-tools 2022.01 -> 2022.07
+- util-linux 2.37.4 -> 2.38.1
+- util-linux-libuuid 2.37.4 -> 2.38.1
+- valgrind 3.18.1 -> 3.19.0
+- vim 9.0.0541 -> 9.0.0598
+- vim-tiny 9.0.0541 -> 9.0.0598
+- virglrenderer 0.9.1 -> 0.10.3
+- vte 0.66.2 -> 0.68.0
+- vulkan-headers 1.3.204.1 -> 1.3.216.0
+- vulkan-loader 1.3.204.1 -> 1.3.216.0
+- vulkan-samples git (28ca2dad83ce…) -> git (74d45aace02d…)
+- vulkan-tools 1.3.204.1 -> 1.3.216.0
+- wayland 1.20.0 -> 1.21.0
+- wayland-protocols 1.25 -> 1.26
+- webkitgtk 2.36.5 -> 2.36.7
+- x264 r3039+gitX (5db6aa6cab1b…) -> r3039+gitX (baee400fa9ce…)
+- xauth 1.1.1 -> 1.1.2
+- xcb-proto 1.14.1 -> 1.15.2
+- xf86-video-cirrus 1.5.3 -> 1.6.0
+- xkeyboard-config 2.35.1 -> 2.36
+- xmlto 0.0.28 -> 0.0.28+0.0.29+gitX
+- xorgproto 2021.5 -> 2022.2
+- zlib 1.2.11 -> 1.2.12
+
+
+
+Contributors to 4.1
+~~~~~~~~~~~~~~~~~~~
+
+Thanks to the following people who contributed to this release:
+
+- Aatir Manzur
+- Ahmed Hossam
+- Alejandro Hernandez Samaniego
+- Alexander Kanavin
+- Alexandre Belloni
+- Alex Kiernan
+- Alex Stewart
+- Andrei Gherzan
+- Andrej Valek
+- Andrey Konovalov
+- Aníbal Limón
+- Anuj Mittal
+- Arkadiusz Drabczyk
+- Armin Kuster
+- Aryaman Gupta
+- Awais Belal
+- Beniamin Sandu
+- Bertrand Marquis
+- Bob Henz
+- Bruce Ashfield
+- Carlos Rafael Giani
+- Changhyeok Bae
+- Changqing Li
+- Chanho Park
+- Chen Qi
+- Christoph Lauer
+- Claudius Heine
+- Daiane Angolini
+- Daniel Gomez
+- Daniel McGregor
+- David Bagonyi
+- Davide Gardenal
+- Denys Dmytriyenko
+- Dmitry Baryshkov
+- Drew Moseley
+- Enrico Scholz
+- Ernst Sjöstrand
+- Etienne Cordonnier
+- Fabio Estevam
+- Federico Pellegrin
+- Felix Moessbauer
+- Ferry Toth
+- Florin Diaconescu
+- Gennaro Iorio
+- Grygorii Tertychnyi
+- Gunjan Gupta
+- Henning Schild
+- He Zhe
+- Hitendra Prajapati
+- Jack Mitchell
+- Jacob Kroon
+- Jan Kiszka
+- Jan Luebbe
+- Jan Vermaete
+- Jasper Orschulko
+- JeongBong Seo
+- Jeremy Puhlman
+- Jiaqing Zhao
+- Joerg Vehlow
+- Johan Korsnes
+- Johannes Schneider
+- John Edward Broadbent
+- Jon Mason
+- Jose Quaresma
+- Joshua Watt
+- Justin Bronder
+- Kai Kang
+- Kevin Hao
+- Khem Raj
+- Konrad Weihmann
+- Kory Maincent
+- Kristian Amlie
+- Lee Chee Yang
+- Lei Maohui
+- Leon Anavi
+- Luca Ceresoli
+- Lucas Stach
+- LUIS ENRIQUEZ
+- Marcel Ziswiler
+- Marius Kriegerowski
+- Mark Hatle
+- Markus Volk
+- Marta Rybczynska
+- Martin Beeger
+- Martin Jansa
+- Mateusz Marciniec
+- Mattias Jernberg
+- Matt Madison
+- Maxime Roussin-Bélanger
+- Michael Halstead
+- Michael Opdenacker
+- Mihai Lindner
+- Mikko Rapeli
+- Ming Liu
+- Mingli Yu
+- Muhammad Hamza
+- Naveen Saini
+- Neil Horman
+- Nick Potenski
+- Nicolas Dechesne
+- Niko Mauno
+- Ola x Nilsson
+- Otavio Salvador
+- Pascal Bach
+- Paul Eggleton
+- Paul Gortmaker
+- Paulo Neves
+- Pavel Zhukov
+- Peter Bergin
+- Peter Kjellerstedt
+- Peter Marko
+- Petr Vorel
+- Pgowda
+- Portia Stephens
+- Quentin Schulz
+- Rahul Kumar
+- Raju Kumar Pothuraju
+- Randy MacLeod
+- Raphael Teller
+- Rasmus Villemoes
+- Ricardo Salveti
+- Richard Purdie
+- Robert Joslyn
+- Robert Yang
+- Roland Hieber
+- Ross Burton
+- Rouven Czerwinski
+- Ruiqiang Hao
+- Russ Dill
+- Rusty Howell
+- Sakib Sajal
+- Samuli Piippo
+- Schmidt, Adriaan
+- Sean Anderson
+- Shruthi Ravichandran
+- Shubham Kulkarni
+- Simone Weiss
+- Sebastian Suesens
+- Stefan Herbrechtsmeier
+- Stefano Babic
+- Stefan Wiehler
+- Steve Sakoman
+- Sundeep KOKKONDA
+- Teoh Jay Shen
+- Thomas Epperson
+- Thomas Perrot
+- Thomas Roos
+- Tobias Schmidl
+- Tomasz Dziendzielski
+- Tom Hochstein
+- Tom Rini
+- Trevor Woerner
+- Ulrich Ölmann
+- Vyacheslav Yurkov
+- Wang Mingyu
+- William A. Kennington III
+- Xiaobing Luo
+- Xu Huan
+- Yang Xu
+- Yi Zhao
+- Yogesh Tyagi
+- Yongxin Liu
+- Yue Tao
+- Yulong (Kevin) Liu
+- Zach Welch
+- Zheng Ruoqin
+- Zoltán Böszörményi
+
+
+
+Repositories / Downloads for 4.1
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~