poky: refresh thud: b904775c2b..7c76c5d78b
Update poky to thud HEAD.
Adam Trhon (1):
icecc-env: don't raise error when icecc not installed
Alexander Kanavin (1):
openssl10: update to 1.0.2q
Armin Kuster (1):
perl: add testdepends for ssh
Bruce Ashfield (2):
linux-yocto/4.18: update to v4.18.26
linux-yocto/4.18: update to v4.18.27
Changqing Li (1):
checklayer: generate locked-sigs.inc under builddir
Dan Dedrick (2):
devtool: remove duplicate overrides
devtool: improve git repo checks before check_commits logic
Daniel Ammann (1):
ref-manual: Typo found and fixed.
Douglas Royds (2):
openssl ptest: Strip build host paths from configdata.pm
openssl: Strip perl version from installed ptest configdata.pm file
Dustin Bain (1):
busybox: update to 1.29.3
Jan Kiszka (1):
oe-git-proxy: Avoid resolving NO_PROXY against local files
Jens Rehsack (1):
avahi: avoid depending on skipped package
Jonas Bonn (1):
keymaps: tighten package write dependency
Kai Kang (1):
selftest/wic: update test case test_qemu
Khem Raj (3):
openssl10: Fix mutliple include assumptions for bn.h in opensslconf.h
send-error-report: Use https instead of http protocol
multilib_header_wrapper.h: Use #pragma once
Leonardo Augusto (1):
scripts/lib/wic/engine: Fix cp's target path for ext* filesystems
Liu Haitao (1):
iw: fix parsing of WEP keys
Mingli Yu (1):
logrotate.py: restore /etc/logrotate.d/wtmp
Otavio Salvador (1):
linux-firmware: Bump to 710963f revision
Ovidiu Panait (1):
ghostscript: Fix CVE-2019-6116
Peter Kjellerstedt (1):
libaio: Extend to native
Richard Purdie (23):
package: Add pkg_postinst_ontarget to PACKAGEVARS
oeqa/runtime/ptest: Avoid traceback for tests with no section
oeqa/utils/logparser: Simplify ptest log parsing code
oeqa/logparser: Further simplification/clarification
oeqa/logparser: Reform the ptest results parser
oeqa/utils/logparser: Add in support for duration, exitcode and logs by section
oeqa/logparser: Improve results handling
oeqa/logparser: Various misc cleanups
oeqa/runtime/ptest: Ensure OOM errors are logged
scripts/contrib/build-perf-test-wrapper.sh: Improve interaction with autobuilder automation
scripts/contrib/build-perf-test.sh: Remove it
oe-build-perf-report: Allow branch without hostname
oe-build-perf-report: Allow commits from different branches
oe-build-perf-report: Improve branch comparision handling
oe-build-perf-report: Fix missing buildstats comparisions
wic/engine: Fix missing parted autobuilder failures
lib/buildstats: Improve error message
scripts/oe-git-archive: Separate out functionality to library function
oe-build-perf-report/gitarchive: Move common useful functions to library
bitbake: runqueue: Fix dependency loop analysis 'hangs'
bitbake: runqueue: Filter out multiconfig dependencies from BB_TASKDEPDATA
bitbake: siggen: Fix multiconfig corner case
bitbake: cooker: Tweak multiconfig dependency resolution
Robert Yang (5):
bluez5: Fix a race issue for tools
yocto-check-layer-wrapper: Fix path for oe-init-build-env
checklayer: Avoid adding the layer if it is already present
runqemu: Let qemuparams override default settings
runqemu: Make QB_MEM easier to set
Ross Burton (3):
e2fsprogs: fix file system generation with large files
linux-firmware: recommend split up packages
linux-firmware: split out liquidio firmware
Scott Rifenbark (2):
poky.ent: Updated "meta-intel" version to "10.1"
overview-manual, mega-manual: Updated Package Feeds diagram
Serhey Popovych (1):
openssl: Skip assembler optimized code for powerpc64 with musl
William Bourque (1):
wic/engine.py: Load paths from PATH environment variable
Xulin Sun (1):
openssl: fix multilib file install conflicts
Zheng Ruoqin (1):
mdadm: add init and service scripts
Change-Id: Ib14c2fb69d25d84aa3d4bf0a6715bba57d1eb900
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
diff --git a/poky/meta/lib/oeqa/runtime/cases/logrotate.py b/poky/meta/lib/oeqa/runtime/cases/logrotate.py
index db6e695..d266644 100644
--- a/poky/meta/lib/oeqa/runtime/cases/logrotate.py
+++ b/poky/meta/lib/oeqa/runtime/cases/logrotate.py
@@ -9,8 +9,12 @@
class LogrotateTest(OERuntimeTestCase):
@classmethod
+ def setUpClass(cls):
+ cls.tc.target.run('cp /etc/logrotate.d/wtmp $HOME/wtmp.oeqabak')
+
+ @classmethod
def tearDownClass(cls):
- cls.tc.target.run('rm -rf $HOME/logrotate_dir')
+ cls.tc.target.run('mv -f $HOME/wtmp.oeqabak /etc/logrotate.d/wtmp && rm -rf $HOME/logrotate_dir')
@OETestID(1544)
@OETestDepends(['ssh.SSHTest.test_ssh'])
diff --git a/poky/meta/lib/oeqa/runtime/cases/perl.py b/poky/meta/lib/oeqa/runtime/cases/perl.py
index afeeb18..be3287f 100644
--- a/poky/meta/lib/oeqa/runtime/cases/perl.py
+++ b/poky/meta/lib/oeqa/runtime/cases/perl.py
@@ -1,11 +1,13 @@
import os
from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
from oeqa.core.decorator.oeid import OETestID
from oeqa.runtime.decorator.package import OEHasPackage
class PerlTest(OERuntimeTestCase):
@OETestID(208)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
@OEHasPackage(['perl'])
def test_perl_works(self):
status, output = self.target.run("perl -e '$_=\"Uryyb, jbeyq\"; tr/a-zA-Z/n-za-mN-ZA-M/;print'")
diff --git a/poky/meta/lib/oeqa/runtime/cases/ptest.py b/poky/meta/lib/oeqa/runtime/cases/ptest.py
index 0972a58..2a28ca5 100644
--- a/poky/meta/lib/oeqa/runtime/cases/ptest.py
+++ b/poky/meta/lib/oeqa/runtime/cases/ptest.py
@@ -1,55 +1,16 @@
import unittest
import pprint
+import datetime
from oeqa.runtime.case import OERuntimeTestCase
from oeqa.core.decorator.depends import OETestDepends
from oeqa.core.decorator.oeid import OETestID
from oeqa.core.decorator.data import skipIfNotFeature
from oeqa.runtime.decorator.package import OEHasPackage
-from oeqa.utils.logparser import Lparser, Result
+from oeqa.utils.logparser import PtestParser
class PtestRunnerTest(OERuntimeTestCase):
- # a ptest log parser
- def parse_ptest(self, logfile):
- parser = Lparser(test_0_pass_regex="^PASS:(.+)",
- test_0_fail_regex="^FAIL:(.+)",
- test_0_skip_regex="^SKIP:(.+)",
- section_0_begin_regex="^BEGIN: .*/(.+)/ptest",
- section_0_end_regex="^END: .*/(.+)/ptest")
- parser.init()
- result = Result()
-
- with open(logfile, errors='replace') as f:
- for line in f:
- result_tuple = parser.parse_line(line)
- if not result_tuple:
- continue
- result_tuple = line_type, category, status, name = parser.parse_line(line)
-
- if line_type == 'section' and status == 'begin':
- current_section = name
- continue
-
- if line_type == 'section' and status == 'end':
- current_section = None
- continue
-
- if line_type == 'test' and status == 'pass':
- result.store(current_section, name, status)
- continue
-
- if line_type == 'test' and status == 'fail':
- result.store(current_section, name, status)
- continue
-
- if line_type == 'test' and status == 'skip':
- result.store(current_section, name, status)
- continue
-
- result.sort_tests()
- return result
-
@OETestID(1600)
@skipIfNotFeature('ptest', 'Test requires ptest to be in DISTRO_FEATURES')
@OETestDepends(['ssh.SSHTest.test_ssh'])
@@ -60,8 +21,6 @@
if status != 0:
self.skipTest("No -ptest packages are installed in the image")
- import datetime
-
test_log_dir = self.td.get('TEST_LOG_DIR', '')
# The TEST_LOG_DIR maybe NULL when testimage is added after
# testdata.json is generated.
@@ -69,9 +28,9 @@
test_log_dir = os.path.join(self.td.get('WORKDIR', ''), 'testimage')
# Don't use self.td.get('DATETIME'), it's from testdata.json, not
# up-to-date, and may cause "File exists" when re-reun.
- datetime = datetime.datetime.now().strftime('%Y%m%d%H%M%S')
+ timestamp = datetime.datetime.now().strftime('%Y%m%d%H%M%S')
ptest_log_dir_link = os.path.join(test_log_dir, 'ptest_log')
- ptest_log_dir = '%s.%s' % (ptest_log_dir_link, datetime)
+ ptest_log_dir = '%s.%s' % (ptest_log_dir_link, timestamp)
ptest_runner_log = os.path.join(ptest_log_dir, 'ptest-runner.log')
status, output = self.target.run('ptest-runner', 0)
@@ -88,25 +47,36 @@
extras['ptestresult.rawlogs'] = {'log': output}
# Parse and save results
- parse_result = self.parse_ptest(ptest_runner_log)
- parse_result.log_as_files(ptest_log_dir, test_status = ['pass','fail', 'skip'])
+ parser = PtestParser()
+ results, sections = parser.parse(ptest_runner_log)
+ parser.results_as_files(ptest_log_dir)
if os.path.exists(ptest_log_dir_link):
# Remove the old link to create a new one
os.remove(ptest_log_dir_link)
os.symlink(os.path.basename(ptest_log_dir), ptest_log_dir_link)
+ extras['ptestresult.sections'] = sections
+
trans = str.maketrans("()", "__")
- resmap = {'pass': 'PASSED', 'skip': 'SKIPPED', 'fail': 'FAILED'}
- for section in parse_result.result_dict:
- for test, result in parse_result.result_dict[section]:
- testname = "ptestresult." + section + "." + "_".join(test.translate(trans).split())
- extras[testname] = {'status': resmap[result]}
+ for section in results:
+ for test in results[section]:
+ result = results[section][test]
+ testname = "ptestresult." + (section or "No-section") + "." + "_".join(test.translate(trans).split())
+ extras[testname] = {'status': result}
failed_tests = {}
- for section in parse_result.result_dict:
- failed_testcases = [ "_".join(test.translate(trans).split()) for test, result in parse_result.result_dict[section] if result == 'fail' ]
+ for section in results:
+ failed_testcases = [ "_".join(test.translate(trans).split()) for test in results[section] if results[section][test] == 'fail' ]
if failed_testcases:
failed_tests[section] = failed_testcases
+ failmsg = ""
+ status, output = self.target.run('dmesg | grep "Killed process"', 0)
+ if output:
+ failmsg = "ERROR: Processes were killed by the OOM Killer:\n%s\n" % output
+
if failed_tests:
- self.fail("Failed ptests:\n%s" % pprint.pformat(failed_tests))
+ failmsg = failmsg + "Failed ptests:\n%s" % pprint.pformat(failed_tests)
+
+ if failmsg:
+ self.fail(failmsg)