Gitiles
Code Review Sign In
gerrit.openbmc.org / stefanberger / openbmc / 9ef5e286f380d29acbf43bb5f7fe6822ab12242b
commit9ef5e286f380d29acbf43bb5f7fe6822ab12242b[log] [tgz]
authorAndrew Geissler <openbmcbump-github@yahoo.com>Wed Mar 20 15:10:46 2019 +0000
committerAndrew Geissler <geissonator@yahoo.com>Wed Mar 20 16:19:42 2019 -0500
tree133b6d0bb4e5697093242b75e6ccd5307902956f
parenta503aba1cb19efdc2a26dfb484f036f5b5b0f3c4 [diff]
mboxbridge: srcrev bump a042978b03..4519bb8262

Andrew Jeffery (10):
      mboxd: Add backend DBus interface and commandline options
      control: dbus: Remove unnecessary vpnor header dependency
      vpnor: Rename mboxd_pnor_partition_table sources to backend
      vpnor: Consolidate backend and mboxd_pnor_partition_table sources
      vpnor: Rename pnor_partition_defs sources to ffs
      vpnor: Rename pnor_partition sources to partition
      vpnor: Rename pnor_partition_table sources to table
      Makefiles: Centralise some use of VIRTUAL_PNOR_ENABLED
      mboxd: Tidy up failure paths on daemon startup
      Documentation: Remove mboxctl.md

(From meta-phosphor rev: ab2d10a602a66b7243f99da8734dfb925bd7f286)

Change-Id: Ie9c5f3a62a8fb881c2b6e48f47184a7ec6c7185a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
1 file changed
tree: 133b6d0bb4e5697093242b75e6ccd5307902956f
  1. .github/
  2. meta-arm/
  3. meta-aspeed/
  4. meta-evb/
  5. meta-facebook/
  6. meta-google/
  7. meta-hxt/
  8. meta-ibm/
  9. meta-ingrasys/
  10. meta-inspur/
  11. meta-intel/
  12. meta-inventec/
  13. meta-mellanox/
  14. meta-nuvoton/
  15. meta-openembedded/
  16. meta-openpower/
  17. meta-phosphor/
  18. meta-portwell/
  19. meta-qualcomm/
  20. meta-quanta/
  21. meta-raspberrypi/
  22. meta-security/
  23. meta-x86/
  24. meta-xilinx/
  25. poky/
  26. bitbake ⇨ poky/bitbake/
  27. LICENSE ⇨ poky/LICENSE
  28. meta ⇨ poky/meta
  29. meta-poky ⇨ poky/meta-poky/
  30. meta-skeleton ⇨ poky/meta-skeleton
  31. oe-init-build-env ⇨ poky/oe-init-build-env
  32. scripts ⇨ poky/scripts/
  33. .gitignore
  34. .gitreview
  35. .templateconf
  36. MAINTAINERS
  37. openbmc-env
  38. README.md
  39. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 28
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake rpcgen
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. You can see all of the known targets with find meta-* -name local.conf.sample. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-ibm/meta-palmetto/conf
Zaiusmeta-ingrasys/meta-zaius/conf
Witherspoonmeta-ibm/meta-witherspoon/conf
Romulusmeta-ibm/meta-romulus/conf

As an example target Palmetto

export TEMPLATECONF=meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing

Features In Progress

  • OpenCompute Redfish Compliance
  • User management
  • Virtual media
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Contact