diff --git a/meta-raspberrypi/conf/machine/include/rpi-base.inc b/meta-raspberrypi/conf/machine/include/rpi-base.inc
index a800078..75c3727 100644
--- a/meta-raspberrypi/conf/machine/include/rpi-base.inc
+++ b/meta-raspberrypi/conf/machine/include/rpi-base.inc
@@ -50,6 +50,7 @@
     overlays/vc4-kms-dsi-7inch.dtbo \
     overlays/w1-gpio.dtbo \
     overlays/w1-gpio-pullup.dtbo \
+    overlays/wm8960-soundcard.dtbo \
     "
 
 RPI_KERNEL_DEVICETREE ?= " \
diff --git a/meta-raspberrypi/docs/extra-build-config.md b/meta-raspberrypi/docs/extra-build-config.md
index 1caf904..ec3bd6a 100644
--- a/meta-raspberrypi/docs/extra-build-config.md
+++ b/meta-raspberrypi/docs/extra-build-config.md
@@ -349,3 +349,24 @@
 Ref.:
 * <https://github.com/raspberrypi/documentation/blob/master/linux/software/libcamera/README.md>
 * <https://www.raspberrypi.org/blog/an-open-source-camera-stack-for-raspberry-pi-using-libcamera/>
+
+## WM8960 soundcard support
+
+Support for WM8960 based sound cards such as the WM8960 Hi-Fi Sound Card HAT for Raspberry Pi from Waveshare, and ReSpeaker 2 / 4 / 6 Mics Pi HAT from Seeed Studio, can be enabled in `local.conf`
+
+    ```conf
+    MACHINE_FEATURES += "wm8960"
+    ```
+
+You may need to adjust volume and toggle switches that are off by default
+
+    ```bash
+    amixer -c1 sset 'Headphone',0 80%,80%
+    amixer -c1 sset 'Speaker',0 80%,80%
+    amixer -c1 sset 'Left Input Mixer Boost' toggle
+    amixer -c1 sset 'Left Output Mixer PCM' toggle
+    amixer -c1 sset 'Right Input Mixer Boost' toggle
+    amixer -c1 sset 'Right Output Mixer PCM' toggle
+    ```
+
+Audio capture on ReSpeaker 2 / 4 / 6 Mics Pi HAT from Seeed Studio is very noisy.
diff --git a/meta-raspberrypi/kas-poky-rpi.yml b/meta-raspberrypi/kas-poky-rpi.yml
index d629e81..3e43e2e 100644
--- a/meta-raspberrypi/kas-poky-rpi.yml
+++ b/meta-raspberrypi/kas-poky-rpi.yml
@@ -45,7 +45,7 @@
     CONF_VERSION = "1"
     PACKAGE_CLASSES = "package_rpm"
     SDKMACHINE = "x86_64"
-    USER_CLASSES = "buildstats image-mklibs image-prelink"
+    USER_CLASSES = "buildstats image-prelink"
     PATCHRESOLVE = "noop"
   debug-tweaks: |
     EXTRA_IMAGE_FEATURES = "debug-tweaks"
diff --git a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb
index 3ebd1e6..13fe304 100644
--- a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb
+++ b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb
@@ -49,3 +49,5 @@
 
 addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/${BOOTFILES_DIR_NAME}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
index 052206a..e84456c 100644
--- a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+++ b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
@@ -30,6 +30,8 @@
 
 CAN_OSCILLATOR ?= "16000000"
 
+WM8960="${@bb.utils.contains("MACHINE_FEATURES", "wm8960", "1", "0", d)}"
+
 inherit deploy nopackages
 
 do_deploy() {
@@ -251,6 +253,12 @@
                 ;;
         esac
     fi
+
+    # WM8960 support
+    if [ "${WM8960}" = "1" ]; then
+        echo "# Enable WM8960" >> $CONFIG
+        echo "dtoverlay=wm8960-soundcard" >> $CONFIG
+    fi
 }
 
 do_deploy_append_raspberrypi3-64() {
diff --git a/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth/0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch b/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth/0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch
index 45b43c7..079377e 100644
--- a/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth/0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch
+++ b/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth/0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch
@@ -8,20 +8,33 @@
 Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
 
 ---
- usr/bin/bthelper | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
+ usr/bin/bthelper | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
 
 diff --git a/usr/bin/bthelper b/usr/bin/bthelper
-index af597e5..5de84f6 100755
+index 2133fbc..1fc9245 100755
 --- a/usr/bin/bthelper
 +++ b/usr/bin/bthelper
-@@ -10,7 +10,7 @@ fi
+@@ -12,8 +12,8 @@ fi
+ dev=$1
  
- dev="$1"
  # Need to bring hci up before looking at MAC as it can be all zeros during init
--/bin/hciconfig "$dev" up
--/bin/hciconfig "$dev" | grep -qE "BD Address: (B8:27:EB|DC:A6:32):" || exit 0
-+/usr/bin/hciconfig "$dev" up
-+/usr/bin/hciconfig "$dev" | grep -qE "BD Address: (B8:27:EB|DC:A6:32):" || exit 0
- /usr/bin/hcitool -i "$dev" cmd 0x3f 0x1c 0x01 0x02 0x00 0x01 0x01 > /dev/null
+-/bin/hciconfig $dev up
+-if ! /bin/hciconfig $dev | grep -q "Bus: UART"; then
++/usr/bin/hciconfig $dev up
++if ! /usr/bin/hciconfig $dev | grep -q "Bus: UART"; then
+     echo Not a UART-attached BT Modem
+     exit 0
+ fi
+@@ -26,7 +26,7 @@ if ( /usr/bin/hcitool -i $dev dev | grep -q -E '\s43:4[35]:' ); then
+     BDADDR=`printf '0x%02x 0x%02x 0x%02x 0xeb 0x27 0xb8' $((0x$B3 ^ 0xaa)) $((0x$B2 ^ 0xaa)) $((0x$B1 ^ 0xaa))`
  
+     /usr/bin/hcitool -i $dev cmd 0x3f 0x001 $BDADDR
+-    /bin/hciconfig $dev reset
++    /usr/bin/hciconfig $dev reset
+ else
+     echo Raspberry Pi BDADDR already set
+ fi
+-- 
+2.31.1
+
diff --git a/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_0.1.12.bb b/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_0.1.17.bb
similarity index 95%
rename from meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_0.1.12.bb
rename to meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_0.1.17.bb
index ccf714b..a1eb97f 100644
--- a/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_0.1.12.bb
+++ b/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_0.1.17.bb
@@ -10,7 +10,7 @@
     git://github.com/RPi-Distro/pi-bluetooth \
     file://0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch \
 "
-SRCREV = "cbdbcb66bcc5b9af05f1a9fffe2254c872bb0ace"
+SRCREV = "fd4775bf90e037551532fc214a958074830bb80d"
 
 S = "${WORKDIR}/git"
 
diff --git a/meta-raspberrypi/recipes-kernel/linux/files/wm8960.cfg b/meta-raspberrypi/recipes-kernel/linux/files/wm8960.cfg
new file mode 100644
index 0000000..9360800
--- /dev/null
+++ b/meta-raspberrypi/recipes-kernel/linux/files/wm8960.cfg
@@ -0,0 +1,2 @@
+CONFIG_I2C_BCM2835=y
+CONFIG_SND_SOC_WM8960=y
diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
index 5ad9b78..683253c 100644
--- a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
+++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
@@ -14,6 +14,7 @@
 SRC_URI += " \
     ${@bb.utils.contains("INITRAMFS_IMAGE_BUNDLE", "1", "file://initramfs-image-bundle.cfg", "", d)} \
     ${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "file://vc4graphics.cfg", "", d)} \
+    ${@bb.utils.contains("MACHINE_FEATURES", "wm8960", "file://wm8960.cfg", "", d)} \
     "
 
 KCONFIG_MODE = "--alldefconfig"