Gitiles
Code Review Sign In
gerrit.openbmc.org / stefanberger / openbmc / a82e2981b7cee2c0e032531fab0b4f5f80c60370
commita82e2981b7cee2c0e032531fab0b4f5f80c60370[log] [tgz]
authorLei YU <mine260309@gmail.com>Fri May 24 13:44:01 2019 +0800
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Tue May 28 18:36:52 2019 -0400
treea107cae66125cf4b8e263ab7cdb31eafe289c30a
parentef6786f13f9c252085d0badf1612e2f1e48c31b3 [diff]
meta-romulus: Set RemainAfterExit for phosphor-cooling-type service

The service phosphor-cooling-type is required by multi-user.target and
thus will be started by default. In case multi-user.target is started
for multiple times, this service will be startd for multiple times as
well, and eventually get start-limit-hit failure.

This commit adds RemainAfterExit=true so the service will be treated as
started and thus will not be started for multiple times.

Resolves openbmc/openbmc#3544

Tested: Reboot Romulus BMC when the host is on, and verify the BMC gets
        READY state after reboot.

(From meta-ibm rev: fdd8f7bb1cca6b505d6b92c741d04a9c6bbfafa7)

Change-Id: Ie3817296265c860d770333c59b591da9d083139c
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
1 file changed
tree: a107cae66125cf4b8e263ab7cdb31eafe289c30a
  1. .github/
  2. meta-arm/
  3. meta-aspeed/
  4. meta-evb/
  5. meta-facebook/
  6. meta-google/
  7. meta-hxt/
  8. meta-ibm/
  9. meta-ingrasys/
  10. meta-inspur/
  11. meta-intel/
  12. meta-inventec/
  13. meta-mellanox/
  14. meta-nuvoton/
  15. meta-openembedded/
  16. meta-openpower/
  17. meta-phosphor/
  18. meta-portwell/
  19. meta-qualcomm/
  20. meta-quanta/
  21. meta-raspberrypi/
  22. meta-security/
  23. meta-x86/
  24. meta-xilinx/
  25. poky/
  26. bitbake ⇨ poky/bitbake/
  27. LICENSE ⇨ poky/LICENSE
  28. meta ⇨ poky/meta
  29. meta-poky ⇨ poky/meta-poky/
  30. meta-skeleton ⇨ poky/meta-skeleton
  31. oe-init-build-env ⇨ poky/oe-init-build-env
  32. scripts ⇨ poky/scripts/
  33. .gitignore
  34. .gitreview
  35. .templateconf
  36. MAINTAINERS
  37. openbmc-env
  38. README.md
  39. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 28
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \
    rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. You can see all of the known targets with find meta-* -name local.conf.sample. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-ibm/meta-palmetto/conf
Zaiusmeta-ingrasys/meta-zaius/conf
Witherspoonmeta-ibm/meta-witherspoon/conf
Romulusmeta-ibm/meta-romulus/conf

As an example target Palmetto

export TEMPLATECONF=meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing

Features In Progress

  • OpenCompute Redfish Compliance
  • User management
  • Virtual media
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Contact