Add ON5263M5 platform
(From meta-inspur rev: 42e8cb80b7e8344ce9fb6ff0c40f81e0bdd03cbe)
Change-Id: I8affa38b64d7db1f4826718983d049dea5ea2f26
Signed-off-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-inspur/meta-on5263m5/conf/bblayers.conf.sample b/meta-inspur/meta-on5263m5/conf/bblayers.conf.sample
new file mode 100644
index 0000000..3c806e9
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/conf/bblayers.conf.sample
@@ -0,0 +1,19 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "8"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-x86 \
+ ##OEROOT##/meta-inspur \
+ ##OEROOT##/meta-inspur/meta-on5263m5\
+"
diff --git a/meta-inspur/meta-on5263m5/conf/conf-notes.txt b/meta-inspur/meta-on5263m5/conf/conf-notes.txt
new file mode 100644
index 0000000..5314bf4
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/conf/conf-notes.txt
@@ -0,0 +1,4 @@
+Common targets are:
+ obmc-phosphor-image
+ virtual/kernel
+ phosphor-ipmi-host
diff --git a/meta-inspur/meta-on5263m5/conf/layer.conf b/meta-inspur/meta-on5263m5/conf/layer.conf
new file mode 100644
index 0000000..93db95c
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/conf/layer.conf
@@ -0,0 +1,12 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+ ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "on5263m5-layer"
+BBFILE_PATTERN_on5263m5-layer = ""
+BBFILE_PRIORITY_on5263m5-layer = "5"
+LAYERSERIES_COMPAT_on5263m5-layer = "sumo"
+
diff --git a/meta-inspur/meta-on5263m5/conf/local.conf.sample b/meta-inspur/meta-on5263m5/conf/local.conf.sample
new file mode 100644
index 0000000..003773e
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/conf/local.conf.sample
@@ -0,0 +1,241 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+
+MACHINE ?= "on5263m5"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "openbmc-phosphor"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specifies the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+SANITY_TESTED_DISTROS_append ?= " RedHatEnterpriseWorkstation-6.*"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necessary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. This assumes there is a
+# libsdl library available on your build system.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Set the root password to '0penBmc'
+INHERIT += "extrausers"
+EXTRA_USERS_PARAMS = " \
+ usermod -p '\$1\$UGMqyqdG\$FZiylVFmRRfl9Z0Ue8G7e/' root; \
+ "
diff --git a/meta-inspur/meta-on5263m5/conf/machine/on5263m5.conf b/meta-inspur/meta-on5263m5/conf/machine/on5263m5.conf
new file mode 100644
index 0000000..c113544
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/conf/machine/on5263m5.conf
@@ -0,0 +1,11 @@
+KMACHINE = "aspeed"
+KERNEL_DEVICETREE = "${KMACHINE}-bmc-inspur-${MACHINE}.dtb"
+
+require conf/machine/include/ast2500.inc
+require conf/machine/include/inspur.inc
+
+UBOOT_MACHINE = "ast_g5_phy_config"
+
+FLASH_SIZE = "32768"
+
+VIRTUAL-RUNTIME_skeleton_workbook = "${MACHINE}-config"
diff --git a/meta-inspur/meta-on5263m5/recipes-phosphor/skeleton/obmc-libobmc-intf/gpio_defs.json b/meta-inspur/meta-on5263m5/recipes-phosphor/skeleton/obmc-libobmc-intf/gpio_defs.json
new file mode 100644
index 0000000..b02709e
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/recipes-phosphor/skeleton/obmc-libobmc-intf/gpio_defs.json
@@ -0,0 +1,47 @@
+{
+ "gpio_configs": {
+
+ "power_config": {
+ "power_good_in": "PGOOD",
+ "power_up_outs": [
+ {"name": "POWER_UP_PIN", "polarity": true}
+ ],
+ "reset_outs": [
+ {"name": "RESET_OUT", "polarity": false}
+ ]
+ }
+ },
+
+ "gpio_definitions": [
+ {
+ "name": "PGOOD",
+ "pin": "AB3",
+ "direction": "in"
+ },
+ {
+ "name": "POWER_BUTTON",
+ "pin": "E2",
+ "direction": "both"
+ },
+ {
+ "name": "POWER_UP_PIN",
+ "pin": "E3",
+ "direction": "out"
+ },
+ {
+ "name": "RESET_BUTTON",
+ "pin": "E0",
+ "direction": "both"
+ },
+ {
+ "name": "RESET_OUT",
+ "pin": "E1",
+ "direction": "out"
+ },
+ {
+ "name": "ID_BUTTON",
+ "pin": "S6",
+ "direction": "both"
+ }
+ ]
+}
diff --git a/meta-inspur/meta-on5263m5/recipes-phosphor/skeleton/obmc-libobmc-intf_%.bbappend b/meta-inspur/meta-on5263m5/recipes-phosphor/skeleton/obmc-libobmc-intf_%.bbappend
new file mode 100644
index 0000000..72d991c
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/recipes-phosphor/skeleton/obmc-libobmc-intf_%.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-inspur/meta-on5263m5/recipes-phosphor/workbook/on5263m5-config.bb b/meta-inspur/meta-on5263m5/recipes-phosphor/workbook/on5263m5-config.bb
new file mode 100644
index 0000000..1b6e926
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/recipes-phosphor/workbook/on5263m5-config.bb
@@ -0,0 +1,38 @@
+SUMMARY = "Inspur On5263 board wiring"
+DESCRIPTION = "Board wiring information for the On5263 system."
+PR = "r1"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${INSPURBASE}/COPYING.apache-2.0;md5=34400b68072d710fecd0a2940a0d1658"
+
+inherit allarch
+inherit setuptools
+inherit pythonnative
+
+PROVIDES += "virtual/obmc-inventory-data"
+RPROVIDES_${PN} += "virtual-obmc-inventory-data"
+
+DEPENDS += "python"
+
+S = "${WORKDIR}"
+SRC_URI += "file://On5263m5.py"
+
+# the following is unnecessary.
+python() {
+ machine = d.getVar('MACHINE', True).capitalize() + '.py'
+ d.setVar('_config_in_skeleton', machine)
+}
+
+do_make_setup() {
+ cp ${S}/${_config_in_skeleton} \
+ ${S}/obmc_system_config.py
+ cat <<EOF > ${S}/setup.py
+from distutils.core import setup
+
+setup(name='${BPN}',
+ version='${PR}',
+ py_modules=['obmc_system_config'],
+ )
+EOF
+}
+
+addtask make_setup after do_patch before do_configure
diff --git a/meta-inspur/meta-on5263m5/recipes-phosphor/workbook/on5263m5-config/On5263m5.py b/meta-inspur/meta-on5263m5/recipes-phosphor/workbook/on5263m5-config/On5263m5.py
new file mode 100644
index 0000000..ca7cb20
--- /dev/null
+++ b/meta-inspur/meta-on5263m5/recipes-phosphor/workbook/on5263m5-config/On5263m5.py
@@ -0,0 +1,48 @@
+## System states
+## state can change to next state in 2 ways:
+## - a process emits a GotoSystemState signal with state name to goto
+## - objects specified in EXIT_STATE_DEPEND have started
+SYSTEM_STATES = [
+ 'BASE_APPS',
+ 'BMC_STARTING',
+ 'BMC_READY',
+ 'HOST_POWERING_ON',
+ 'HOST_POWERED_ON',
+ 'HOST_BOOTING',
+ 'HOST_BOOTED',
+ 'HOST_POWERED_OFF',
+]
+
+EXIT_STATE_DEPEND = {
+ 'BASE_APPS' : {
+ '/xyz/openbmc_poroject/sensors': 0,
+ },
+ 'BMC_STARTING' : {
+ '/xyz/openbmc_project/control/chassis0': 0,
+ },
+}
+
+FRU_INSTANCES = {}
+
+# I believe these numbers need to match the yaml file used to create the c++ ipmi map.
+# the devices have types, but I don't believe that factors in here, I think these are
+# just unique IDs.
+ID_LOOKUP = {
+ 'FRU' : {},
+ # The number at the end needs to match the FRU ID.
+ # https://github.com/openbmc/skeleton/blob/master/pysystemmgr/system_manager.py#L143
+ # The parameter for it is of type 'y' (unsigned 8-bit integer) presumably decimal?
+ 'FRU_STR' : {},
+ 'SENSOR' : {},
+ 'GPIO_PRESENT' : {}
+}
+
+GPIO_CONFIG = {}
+HWMON_CONFIG = {}
+GPIO_CONFIGS = {}
+
+# Miscellaneous non-poll sensor with system specific properties.
+# The sensor id is the same as those defined in ID_LOOKUP['SENSOR'].
+MISC_SENSORS = {}
+
+# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4