meta-nicole: Initial version
NICOLE is a new storage controller for TATLIN server.
It based on IBM Romulus reference design (POWER9)
and uses an AST2500 BMC SoC.
(From meta-yadro rev: 13af90da095c5eb6874ce6f89a8b66a7932e6c50)
Change-Id: I4685be88448e1de8a1a716ad3f59ef09e168a1df
Signed-off-by: Alexander Soldatov <a.soldatov@yadro.com>
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-yadro/meta-nicole/conf/bblayers.conf.sample b/meta-yadro/meta-nicole/conf/bblayers.conf.sample
new file mode 100644
index 0000000..62622c8
--- /dev/null
+++ b/meta-yadro/meta-nicole/conf/bblayers.conf.sample
@@ -0,0 +1,31 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "8"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-openpower \
+ ##OEROOT##/meta-yadro \
+ ##OEROOT##/meta-yadro/meta-nicole \
+ "
+BBLAYERS_NON_REMOVABLE ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-openpower \
+ ##OEROOT##/meta-yadro \
+ ##OEROOT##/meta-yadro/meta-nicole \
+ "
diff --git a/meta-yadro/meta-nicole/conf/conf-notes.txt b/meta-yadro/meta-nicole/conf/conf-notes.txt
new file mode 100644
index 0000000..9b3c01a
--- /dev/null
+++ b/meta-yadro/meta-nicole/conf/conf-notes.txt
@@ -0,0 +1,2 @@
+Common targets are:
+ obmc-phosphor-image
diff --git a/meta-yadro/meta-nicole/conf/layer.conf b/meta-yadro/meta-nicole/conf/layer.conf
new file mode 100644
index 0000000..85d0963
--- /dev/null
+++ b/meta-yadro/meta-nicole/conf/layer.conf
@@ -0,0 +1,10 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+ ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "nicole-layer"
+BBFILE_PATTERN_nicole-layer := "^${LAYERDIR}/"
+LAYERSERIES_COMPAT_nicole-layer = "thud warrior"
diff --git a/meta-yadro/meta-nicole/conf/local.conf.sample b/meta-yadro/meta-nicole/conf/local.conf.sample
new file mode 100644
index 0000000..ba1d82e
--- /dev/null
+++ b/meta-yadro/meta-nicole/conf/local.conf.sample
@@ -0,0 +1,216 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+MACHINE ??= "nicole"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "openbmc-openpower"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specifies the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+SANITY_TESTED_DISTROS_append ?= " *"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necessary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. This assumes there is a
+# libsdl library available on your build system.
+#PACKAGECONFIG_append_pn-qemu-native = " sdl"
+#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
diff --git a/meta-yadro/meta-nicole/conf/machine/nicole.conf b/meta-yadro/meta-nicole/conf/machine/nicole.conf
new file mode 100644
index 0000000..488e6af
--- /dev/null
+++ b/meta-yadro/meta-nicole/conf/machine/nicole.conf
@@ -0,0 +1,13 @@
+KMACHINE = "aspeed"
+KERNEL_DEVICETREE = "${KMACHINE}-bmc-opp-${MACHINE}.dtb"
+
+UBOOT_MACHINE = "ast_g5_ncsi_config"
+
+PREFERRED_PROVIDER_virtual/p9-vcs-workaround = ''
+
+require conf/machine/include/ast2500.inc
+require conf/machine/include/obmc-bsp-common.inc
+require conf/machine/include/openpower.inc
+require conf/machine/include/p9.inc
+
+IMAGE_FEATURES_remove = " obmc-fan-control obmc-fan-mgmt obmc-leds"
diff --git a/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 0000000..5330522
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Nicole BMC";
+ compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ coldfire_memory: codefire_memory@9ef00000 {
+ reg = <0x9ef00000 0x00100000>;
+ no-map;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ };
+
+ fsi: gpio-fsi {
+ compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&gpio {
+ nic_func_mode0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode0";
+ };
+ nic_func_mode1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode1";
+ };
+ seq_cont {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "seq_cont";
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/nicole.cfg b/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/nicole.cfg
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/nicole.cfg
diff --git a/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed_%.bbappend
new file mode 100644
index 0000000..bd3e475
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed_%.bbappend
@@ -0,0 +1,12 @@
+FILESEXTRAPATHS_prepend_nicole := "${THISDIR}/${PN}:"
+SRC_URI += "file://nicole.cfg \
+ file://arch \
+"
+
+# Merge source tree by original project with our layer of additional files
+do_add_vesnin_files () {
+ cp -r "${WORKDIR}/arch" \
+ "${STAGING_KERNEL_DIR}"
+}
+addtask do_add_vesnin_files after do_kernel_checkout before do_patch
+
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control.bb b/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control.bb
new file mode 100644
index 0000000..854795b
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control.bb
@@ -0,0 +1,25 @@
+SUMMARY = "Nicole AVSBus control"
+PR = "r1"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${YADROBASE}/COPYING.apache-2.0;md5=34400b68072d710fecd0a2940a0d1658"
+
+inherit obmc-phosphor-systemd
+
+RDEPENDS_${PN} += "i2c-tools"
+
+S = "${WORKDIR}"
+SRC_URI += "file://avsbus-control.sh"
+
+do_install() {
+ install -d ${D}${bindir}
+ install -m 0755 ${WORKDIR}/avsbus-control.sh \
+ ${D}${bindir}/avsbus-control.sh
+}
+
+TMPL= "avsbus-control@.service"
+INSTFMT= "avsbus-control@{0}.service"
+TGTFMT = "obmc-chassis-poweron@{0}.target"
+FMT = "../${TMPL}:${TGTFMT}.requires/${INSTFMT}"
+
+SYSTEMD_SERVICE_${PN} += "${TMPL}"
+SYSTEMD_LINK_${PN} += "${@compose_list(d, 'FMT', 'OBMC_CHASSIS_INSTANCES')}"
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control/avsbus-control.sh b/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control/avsbus-control.sh
new file mode 100755
index 0000000..0330b22
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control/avsbus-control.sh
@@ -0,0 +1,31 @@
+#!/bin/sh -eu
+
+function override_avs_settings()
+{
+ BUS=$1
+
+ i2cset -y ${BUS} 0x44 0x00 0x00 b # VCS
+ i2cset -y ${BUS} 0x44 0x24 0x044C w # VOUT_MAX 1100mV
+ i2cset -y ${BUS} 0x44 0x40 0x0456 w # VOUT_OV_FAULT_LIMIT 1110mV
+ i2cset -y ${BUS} 0x44 0x25 0x0438 w # VOUT_MARGING_HIGH 1080mV
+ i2cset -y ${BUS} 0x44 0x26 0x03D4 w # VOUT_MARGING_LOW 980mV
+ i2cset -y ${BUS} 0x44 0x44 0x024E w # VOUT_UV_FAULT_LIMIT 590mV
+ i2cset -y ${BUS} 0x44 0x2B 0x0258 w # VOUT_MIN 600mV
+
+ i2cset -y ${BUS} 0x44 0x00 0x01 b # VDD
+ i2cset -y ${BUS} 0x44 0x24 0x044C w # VOUT_MAX 1100mV
+ i2cset -y ${BUS} 0x44 0x40 0x0456 w # VOUT_OV_FAULT_LIMIT 1110mV
+ i2cset -y ${BUS} 0x44 0x25 0x041A w # VOUT_MARGING_HIGH 1050mV
+ i2cset -y ${BUS} 0x44 0x26 0x03B6 w # VOUT_MARGING_LOW 950mV
+ i2cset -y ${BUS} 0x44 0x44 0x024E w # VOUT_UV_FAULT_LIMIT 590mV
+ i2cset -y ${BUS} 0x44 0x2B 0x0258 w # VOUT_MIN 600mV
+
+ i2cset -y ${BUS} 0x44 0x00 0xFF b # All pages (VCS & VDD)
+ i2cset -y ${BUS} 0x44 0x01 0xB0 b # Enable
+
+ i2cset -y ${BUS} 0x46 0x00 0x01 b # VDN
+ i2cset -y ${BUS} 0x46 0x01 0xB0 b # Enable
+}
+
+override_avs_settings 4
+override_avs_settings 5
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control/avsbus-control@.service b/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control/avsbus-control@.service
new file mode 100644
index 0000000..247c506
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/chassis/avsbus-control/avsbus-control@.service
@@ -0,0 +1,20 @@
+[Unit]
+Description=Enable the AVS bus on VRMs
+Wants=obmc-host-start-pre@%i.target
+Before=obmc-host-start-pre@%i.target
+Wants=obmc-power-on@%i.target
+After=obmc-power-on@%i.target
+Wants=fsi-scan@%i.service
+After=fsi-scan@%i.service
+Conflicts=obmc-chassis-poweroff@%i.target
+ConditionPathExists=!/run/openbmc/chassis@%i-on
+
+[Service]
+ExecStart=/usr/bin/avsbus-control.sh
+SyslogIdentifier=avsbus-control.sh
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=obmc-chassis-poweron@%i.target
+
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/console/obmc-console/obmc-console.conf b/meta-yadro/meta-nicole/recipes-phosphor/console/obmc-console/obmc-console.conf
new file mode 100644
index 0000000..a5ba3f3
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/console/obmc-console/obmc-console.conf
@@ -0,0 +1,4 @@
+lpc-address = 0x3f8
+sirq = 4
+local-tty = ttyS0
+local-tty-baud = 115200
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/console/obmc-console_%.bbappend b/meta-yadro/meta-nicole/recipes-phosphor/console/obmc-console_%.bbappend
new file mode 100644
index 0000000..72d991c
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/console/obmc-console_%.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/host/p9-host-start.bbappend b/meta-yadro/meta-nicole/recipes-phosphor/host/p9-host-start.bbappend
new file mode 100644
index 0000000..83ef545
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/host/p9-host-start.bbappend
@@ -0,0 +1,2 @@
+RDEPENDS_${PN}_append = " avsbus-control"
+RDEPENDS_${PN}_remove = " p9-vcs-workaround"
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/images/obmc-phosphor-image.bbappend b/meta-yadro/meta-nicole/recipes-phosphor/images/obmc-phosphor-image.bbappend
new file mode 100644
index 0000000..aa57bbf
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/images/obmc-phosphor-image.bbappend
@@ -0,0 +1 @@
+OBMC_IMAGE_EXTRA_INSTALL_append = " mboxd"
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/mboxd/mboxd_%.bbappend b/meta-yadro/meta-nicole/recipes-phosphor/mboxd/mboxd_%.bbappend
new file mode 100644
index 0000000..8b6248a
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/mboxd/mboxd_%.bbappend
@@ -0,0 +1 @@
+MBOXD_FLASH_SIZE = "64M"
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/skeleton/obmc-libobmc-intf/gpio_defs.json b/meta-yadro/meta-nicole/recipes-phosphor/skeleton/obmc-libobmc-intf/gpio_defs.json
new file mode 100644
index 0000000..146b9af
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/skeleton/obmc-libobmc-intf/gpio_defs.json
@@ -0,0 +1,72 @@
+{
+ "gpio_configs": {
+
+ "power_config": {
+ "power_good_in": "SYS_PWROK_BUFF",
+ "power_up_outs": [
+ { "name": "SOFTWARE_PGOOD", "polarity": true},
+ { "name": "BMC_POWER_UP", "polarity": true}
+ ],
+ "reset_outs": [
+ ]
+ }
+ },
+
+ "gpio_definitions": [
+ {
+ "name": "SOFTWARE_PGOOD",
+ "pin": "R1",
+ "direction": "out"
+ },
+ {
+ "name": "BMC_POWER_UP",
+ "pin": "D1",
+ "direction": "out"
+ },
+ {
+ "name": "SYS_PWROK_BUFF",
+ "pin": "D2",
+ "direction": "in"
+ },
+ {
+ "name": "BMC_WD_CLEAR_PULSE_N",
+ "pin": "N5",
+ "direction": "falling"
+ },
+ {
+ "name": "CHECKSTOP",
+ "pin": "J2",
+ "direction": "falling"
+ },
+ {
+ "name": "BMC_CP0_RESET_N",
+ "pin": "A1",
+ "direction": "out"
+ },
+ {
+ "name": "BMC_CP0_PERST_ENABLE_R",
+ "pin": "A3",
+ "direction": "out"
+ },
+ {
+ "name": "BMC_THROTTLE",
+ "pin": "J3",
+ "direction": "out"
+ },
+ {
+ "name": "IDBTN",
+ "pin": "Q7",
+ "direction": "out"
+ },
+ {
+ "name": "POWER_BUTTON",
+ "pin": "I3",
+ "direction": "both"
+ },
+ {
+ "name": "RESET_BUTTON",
+ "pin": "J1",
+ "direction": "both"
+ }
+ ]
+}
diff --git a/meta-yadro/meta-nicole/recipes-phosphor/skeleton/obmc-libobmc-intf_%.bbappend b/meta-yadro/meta-nicole/recipes-phosphor/skeleton/obmc-libobmc-intf_%.bbappend
new file mode 100644
index 0000000..72d991c
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes-phosphor/skeleton/obmc-libobmc-intf_%.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-yadro/meta-nicole/recipes.txt b/meta-yadro/meta-nicole/recipes.txt
new file mode 100644
index 0000000..3ec3f4a
--- /dev/null
+++ b/meta-yadro/meta-nicole/recipes.txt
@@ -0,0 +1,2 @@
+recipes-kernel - The kernel and generic applications/libraries with strong kernel dependencies
+recipes-phosphor - Phosphor OpenBMC applications and configuration