Import 80d60e7 from yoctoproject.org meta-arm
To support ARMv8 SoCs.
meta-arm has several patch files. Since they are maintained by the
upstream meta-arm community, add meta-arm to the ignore list in
run-repotest.
Change-Id: Ia87a2e947bbabd347d256eccc47a343e1c885479
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-arm/meta-arm-bsp/conf/machine/fvp-common.inc b/meta-arm/meta-arm-bsp/conf/machine/fvp-common.inc
new file mode 100644
index 0000000..c834f24
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/conf/machine/fvp-common.inc
@@ -0,0 +1,47 @@
+# FVP common parameters
+
+#
+# Capturing FVP common configurations (Armv8-A Base Platform FVP,
+# Armv8-A Foundation Platform and Armv7-A Base Platform FVP).
+#
+
+MACHINE_FEATURES = "optee"
+
+IMAGE_FSTYPES += "wic"
+WKS_FILE ?= "fvp-base.wks"
+
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+
+KERNEL_DEVICETREE = "arm/fvp-base-revc.dtb"
+
+EXTRA_IMAGEDEPENDS += "trusted-firmware-a u-boot"
+
+# As this is a virtual target that will not be used in the real world there is
+# no need for real SSH keys. Disable rng-tools (which takes too long to
+# initialise) and install the pre-generated keys.
+PACKAGECONFIG:remove:pn-openssh = "rng-tools"
+MACHINE_EXTRA_RRECOMMENDS += "ssh-pregen-hostkeys"
+
+TEST_TARGET = "OEFVPTarget"
+
+FVP_PROVIDER ?= "fvp-base-a-aem-native"
+FVP_EXE ?= "FVP_Base_RevC-2xAEMvA"
+FVP_CONFIG[bp.ve_sysregs.exit_on_shutdown] ?= "1"
+FVP_CONFIG[bp.virtio_net.enabled] ?= "1"
+FVP_CONFIG[bp.virtio_net.hostbridge.userNetworking] ?= "1"
+FVP_CONFIG[cache_state_modelled] ?= "0"
+FVP_CONFIG[bp.secureflashloader.fname] ?= "${DEPLOY_DIR_IMAGE}/bl1-fvp.bin"
+FVP_CONFIG[bp.flashloader0.fname] ?= "${DEPLOY_DIR_IMAGE}/fip-fvp.bin"
+FVP_CONFIG[bp.virtioblockdevice.image_path] ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.wic"
+# Set the baseline to ARMv8.4, as the default is 8.0.
+FVP_CONFIG[cluster0.has_arm_v8-4] = "1"
+FVP_CONFIG[cluster1.has_arm_v8-4] = "1"
+FVP_CONSOLE ?= "terminal_0"
+FVP_DATA ?= "cluster0.cpu0=${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}@0x80080000 \
+ cluster0.cpu0=${DEPLOY_DIR_IMAGE}/fvp-base-revc.dtb@0x8fc00000"
+FVP_TERMINALS[bp.terminal_0] ?= "Console"
+FVP_TERMINALS[bp.terminal_1] ?= ""
+FVP_TERMINALS[bp.terminal_2] ?= ""
+FVP_TERMINALS[bp.terminal_3] ?= ""