diff --git a/meta/lib/oeqa/controllers/__init__.py b/meta/lib/oeqa/controllers/__init__.py
new file mode 100644
index 0000000..8eda927
--- /dev/null
+++ b/meta/lib/oeqa/controllers/__init__.py
@@ -0,0 +1,3 @@
+# Enable other layers to have modules in the same named directory
+from pkgutil import extend_path
+__path__ = extend_path(__path__, __name__)
diff --git a/meta/lib/oeqa/controllers/masterimage.py b/meta/lib/oeqa/controllers/masterimage.py
new file mode 100644
index 0000000..522f9eb
--- /dev/null
+++ b/meta/lib/oeqa/controllers/masterimage.py
@@ -0,0 +1,201 @@
+# Copyright (C) 2014 Intel Corporation
+#
+# Released under the MIT license (see COPYING.MIT)
+
+# This module adds support to testimage.bbclass to deploy images and run
+# tests using a "master image" - this is a "known good" image that is
+# installed onto the device as part of initial setup and will be booted into
+# with no interaction; we can then use it to deploy the image to be tested
+# to a second partition before running the tests.
+#
+# For an example master image, see core-image-testmaster
+# (meta/recipes-extended/images/core-image-testmaster.bb)
+
+import os
+import bb
+import traceback
+import time
+import subprocess
+
+import oeqa.targetcontrol
+import oeqa.utils.sshcontrol as sshcontrol
+import oeqa.utils.commands as commands
+from oeqa.utils import CommandError
+
+from abc import ABCMeta, abstractmethod
+
+class MasterImageHardwareTarget(oeqa.targetcontrol.BaseTarget):
+
+    __metaclass__ = ABCMeta
+
+    supported_image_fstypes = ['tar.gz', 'tar.bz2']
+
+    def __init__(self, d):
+        super(MasterImageHardwareTarget, self).__init__(d)
+
+        # target ip
+        addr = d.getVar("TEST_TARGET_IP", True) or bb.fatal('Please set TEST_TARGET_IP with the IP address of the machine you want to run the tests on.')
+        self.ip = addr.split(":")[0]
+        try:
+            self.port = addr.split(":")[1]
+        except IndexError:
+            self.port = None
+        bb.note("Target IP: %s" % self.ip)
+        self.server_ip = d.getVar("TEST_SERVER_IP", True)
+        if not self.server_ip:
+            try:
+                self.server_ip = subprocess.check_output(['ip', 'route', 'get', self.ip ]).split("\n")[0].split()[-1]
+            except Exception as e:
+                bb.fatal("Failed to determine the host IP address (alternatively you can set TEST_SERVER_IP with the IP address of this machine): %s" % e)
+        bb.note("Server IP: %s" % self.server_ip)
+
+        # test rootfs + kernel
+        self.image_fstype = self.get_image_fstype(d)
+        self.rootfs = os.path.join(d.getVar("DEPLOY_DIR_IMAGE", True), d.getVar("IMAGE_LINK_NAME", True) + '.' + self.image_fstype)
+        self.kernel = os.path.join(d.getVar("DEPLOY_DIR_IMAGE", True), d.getVar("KERNEL_IMAGETYPE", False) + '-' + d.getVar('MACHINE', False) + '.bin')
+        if not os.path.isfile(self.rootfs):
+            # we could've checked that IMAGE_FSTYPES contains tar.gz but the config for running testimage might not be
+            # the same as the config with which the image was build, ie
+            # you bitbake core-image-sato with IMAGE_FSTYPES += "tar.gz"
+            # and your autobuilder overwrites the config, adds the test bits and runs bitbake core-image-sato -c testimage
+            bb.fatal("No rootfs found. Did you build the image ?\nIf yes, did you build it with IMAGE_FSTYPES += \"tar.gz\" ? \
+                      \nExpected path: %s" % self.rootfs)
+        if not os.path.isfile(self.kernel):
+            bb.fatal("No kernel found. Expected path: %s" % self.kernel)
+
+        # master ssh connection
+        self.master = None
+        # if the user knows what they are doing, then by all means...
+        self.user_cmds = d.getVar("TEST_DEPLOY_CMDS", True)
+        self.deploy_cmds = None
+
+        # this is the name of the command that controls the power for a board
+        # e.g: TEST_POWERCONTROL_CMD = "/home/user/myscripts/powercontrol.py ${MACHINE} what-ever-other-args-the-script-wants"
+        # the command should take as the last argument "off" and "on" and "cycle" (off, on)
+        self.powercontrol_cmd = d.getVar("TEST_POWERCONTROL_CMD", True) or None
+        self.powercontrol_args = d.getVar("TEST_POWERCONTROL_EXTRA_ARGS", False) or ""
+
+        self.serialcontrol_cmd = d.getVar("TEST_SERIALCONTROL_CMD", True) or None
+        self.serialcontrol_args = d.getVar("TEST_SERIALCONTROL_EXTRA_ARGS", False) or ""
+
+        self.origenv = os.environ
+        if self.powercontrol_cmd or self.serialcontrol_cmd:
+            # the external script for controlling power might use ssh
+            # ssh + keys means we need the original user env
+            bborigenv = d.getVar("BB_ORIGENV", False) or {}
+            for key in bborigenv:
+                val = bborigenv.getVar(key, True)
+                if val is not None:
+                    self.origenv[key] = str(val)
+
+        if self.powercontrol_cmd:
+            if self.powercontrol_args:
+                self.powercontrol_cmd = "%s %s" % (self.powercontrol_cmd, self.powercontrol_args)
+        if self.serialcontrol_cmd:
+            if self.serialcontrol_args:
+                self.serialcontrol_cmd = "%s %s" % (self.serialcontrol_cmd, self.serialcontrol_args)
+
+    def power_ctl(self, msg):
+        if self.powercontrol_cmd:
+            cmd = "%s %s" % (self.powercontrol_cmd, msg)
+            try:
+                commands.runCmd(cmd, assert_error=False, preexec_fn=os.setsid, env=self.origenv)
+            except CommandError as e:
+                bb.fatal(str(e))
+
+    def power_cycle(self, conn):
+        if self.powercontrol_cmd:
+            # be nice, don't just cut power
+            conn.run("shutdown -h now")
+            time.sleep(10)
+            self.power_ctl("cycle")
+        else:
+            status, output = conn.run("reboot")
+            if status != 0:
+                bb.error("Failed rebooting target and no power control command defined. You need to manually reset the device.\n%s" % output)
+
+    def _wait_until_booted(self):
+        ''' Waits until the target device has booted (if we have just power cycled it) '''
+        # Subclasses with better methods of determining boot can override this
+        time.sleep(120)
+
+    def deploy(self):
+        # base class just sets the ssh log file for us
+        super(MasterImageHardwareTarget, self).deploy()
+        self.master = sshcontrol.SSHControl(ip=self.ip, logfile=self.sshlog, timeout=600, port=self.port)
+        status, output = self.master.run("cat /etc/masterimage")
+        if status != 0:
+            # We're not booted into the master image, so try rebooting
+            bb.plain("%s - booting into the master image" % self.pn)
+            self.power_ctl("cycle")
+            self._wait_until_booted()
+
+        bb.plain("%s - deploying image on target" % self.pn)
+        status, output = self.master.run("cat /etc/masterimage")
+        if status != 0:
+            bb.fatal("No ssh connectivity or target isn't running a master image.\n%s" % output)
+        if self.user_cmds:
+            self.deploy_cmds = self.user_cmds.split("\n")
+        try:
+            self._deploy()
+        except Exception as e:
+            bb.fatal("Failed deploying test image: %s" % e)
+
+    @abstractmethod
+    def _deploy(self):
+        pass
+
+    def start(self, params=None):
+        bb.plain("%s - boot test image on target" % self.pn)
+        self._start()
+        # set the ssh object for the target/test image
+        self.connection = sshcontrol.SSHControl(self.ip, logfile=self.sshlog, port=self.port)
+        bb.plain("%s - start running tests" % self.pn)
+
+    @abstractmethod
+    def _start(self):
+        pass
+
+    def stop(self):
+        bb.plain("%s - reboot/powercycle target" % self.pn)
+        self.power_cycle(self.connection)
+
+
+class GummibootTarget(MasterImageHardwareTarget):
+
+    def __init__(self, d):
+        super(GummibootTarget, self).__init__(d)
+        # this the value we need to set in the LoaderEntryOneShot EFI variable
+        # so the system boots the 'test' bootloader label and not the default
+        # The first four bytes are EFI bits, and the rest is an utf-16le string
+        # (EFI vars values need to be utf-16)
+        # $ echo -en "test\0" | iconv -f ascii -t utf-16le | hexdump -C
+        # 00000000  74 00 65 00 73 00 74 00  00 00                    |t.e.s.t...|
+        self.efivarvalue = r'\x07\x00\x00\x00\x74\x00\x65\x00\x73\x00\x74\x00\x00\x00'
+        self.deploy_cmds = [
+                'mount -L boot /boot',
+                'mkdir -p /mnt/testrootfs',
+                'mount -L testrootfs /mnt/testrootfs',
+                'modprobe efivarfs',
+                'mount -t efivarfs efivarfs /sys/firmware/efi/efivars',
+                'cp ~/test-kernel /boot',
+                'rm -rf /mnt/testrootfs/*',
+                'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype,
+                'printf "%s" > /sys/firmware/efi/efivars/LoaderEntryOneShot-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f' % self.efivarvalue
+                ]
+
+    def _deploy(self):
+        # make sure these aren't mounted
+        self.master.run("umount /boot; umount /mnt/testrootfs; umount /sys/firmware/efi/efivars;")
+        # from now on, every deploy cmd should return 0
+        # else an exception will be thrown by sshcontrol
+        self.master.ignore_status = False
+        self.master.copy_to(self.rootfs, "~/test-rootfs." + self.image_fstype)
+        self.master.copy_to(self.kernel, "~/test-kernel")
+        for cmd in self.deploy_cmds:
+            self.master.run(cmd)
+
+    def _start(self, params=None):
+        self.power_cycle(self.master)
+        # there are better ways than a timeout but this should work for now
+        time.sleep(120)
diff --git a/meta/lib/oeqa/controllers/testtargetloader.py b/meta/lib/oeqa/controllers/testtargetloader.py
new file mode 100644
index 0000000..a1b7b1d
--- /dev/null
+++ b/meta/lib/oeqa/controllers/testtargetloader.py
@@ -0,0 +1,70 @@
+import types
+import bb
+import os
+
+# This class is responsible for loading a test target controller
+class TestTargetLoader:
+
+    # Search oeqa.controllers module directory for and return a controller  
+    # corresponding to the given target name. 
+    # AttributeError raised if not found.
+    # ImportError raised if a provided module can not be imported.
+    def get_controller_module(self, target, bbpath):
+        controllerslist = self.get_controller_modulenames(bbpath)
+        bb.note("Available controller modules: %s" % str(controllerslist))
+        controller = self.load_controller_from_name(target, controllerslist)
+        return controller
+
+    # Return a list of all python modules in lib/oeqa/controllers for each
+    # layer in bbpath
+    def get_controller_modulenames(self, bbpath):
+
+        controllerslist = []
+
+        def add_controller_list(path):
+            if not os.path.exists(os.path.join(path, '__init__.py')):
+                bb.fatal('Controllers directory %s exists but is missing __init__.py' % path)
+            files = sorted([f for f in os.listdir(path) if f.endswith('.py') and not f.startswith('_')])
+            for f in files:
+                module = 'oeqa.controllers.' + f[:-3]
+                if module not in controllerslist:
+                    controllerslist.append(module)
+                else:
+                    bb.warn("Duplicate controller module found for %s, only one added. Layers should create unique controller module names" % module)
+
+        for p in bbpath:
+            controllerpath = os.path.join(p, 'lib', 'oeqa', 'controllers')
+            bb.debug(2, 'Searching for target controllers in %s' % controllerpath)
+            if os.path.exists(controllerpath):
+                add_controller_list(controllerpath)
+        return controllerslist
+
+    # Search for and return a controller from given target name and
+    # set of module names. 
+    # Raise AttributeError if not found.
+    # Raise ImportError if a provided module can not be imported
+    def load_controller_from_name(self, target, modulenames):
+        for name in modulenames:
+            obj = self.load_controller_from_module(target, name)
+            if obj:
+                return obj
+        raise AttributeError("Unable to load {0} from available modules: {1}".format(target, str(modulenames)))
+
+    # Search for and return a controller or None from given module name
+    def load_controller_from_module(self, target, modulename):
+        obj = None
+        # import module, allowing it to raise import exception
+        module = __import__(modulename, globals(), locals(), [target])
+        # look for target class in the module, catching any exceptions as it
+        # is valid that a module may not have the target class.
+        try:
+            obj = getattr(module, target)
+            if obj: 
+                from oeqa.targetcontrol import BaseTarget
+                if (not isinstance(obj, (type, types.ClassType))):
+                    bb.warn("Target {0} found, but not of type Class".format(target))
+                if( not issubclass(obj, BaseTarget)):
+                    bb.warn("Target {0} found, but subclass is not BaseTarget".format(target))
+        except:
+            obj = None
+        return obj