Squashed 'yocto-poky/' content from commit ea562de
git-subtree-dir: yocto-poky
git-subtree-split: ea562de57590c966cd5a75fda8defecd397e6436
diff --git a/meta/recipes-connectivity/dhcp/files/dhcpd.conf b/meta/recipes-connectivity/dhcp/files/dhcpd.conf
new file mode 100644
index 0000000..0001c0f
--- /dev/null
+++ b/meta/recipes-connectivity/dhcp/files/dhcpd.conf
@@ -0,0 +1,108 @@
+#
+# Sample configuration file for ISC dhcpd for Debian
+#
+# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
+#
+
+# The ddns-updates-style parameter controls whether or not the server will
+# attempt to do a DNS update when a lease is confirmed. We default to the
+# behavior of the version 2 packages ('none', since DHCP v2 didn't
+# have support for DDNS.)
+ddns-update-style none;
+
+# option definitions common to all supported networks...
+option domain-name "example.org";
+option domain-name-servers ns1.example.org, ns2.example.org;
+
+default-lease-time 600;
+max-lease-time 7200;
+
+# If this DHCP server is the official DHCP server for the local
+# network, the authoritative directive should be uncommented.
+#authoritative;
+
+# Use this to send dhcp log messages to a different log file (you also
+# have to hack syslog.conf to complete the redirection).
+log-facility local7;
+
+# No service will be given on this subnet, but declaring it helps the
+# DHCP server to understand the network topology.
+
+#subnet 10.152.187.0 netmask 255.255.255.0 {
+#}
+
+# This is a very basic subnet declaration.
+
+#subnet 10.254.239.0 netmask 255.255.255.224 {
+# range 10.254.239.10 10.254.239.20;
+# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
+#}
+
+# This declaration allows BOOTP clients to get dynamic addresses,
+# which we don't really recommend.
+
+#subnet 10.254.239.32 netmask 255.255.255.224 {
+# range dynamic-bootp 10.254.239.40 10.254.239.60;
+# option broadcast-address 10.254.239.31;
+# option routers rtr-239-32-1.example.org;
+#}
+
+# A slightly different configuration for an internal subnet.
+#subnet 10.5.5.0 netmask 255.255.255.224 {
+# range 10.5.5.26 10.5.5.30;
+# option domain-name-servers ns1.internal.example.org;
+# option domain-name "internal.example.org";
+# option routers 10.5.5.1;
+# option broadcast-address 10.5.5.31;
+# default-lease-time 600;
+# max-lease-time 7200;
+#}
+
+# Hosts which require special configuration options can be listed in
+# host statements. If no address is specified, the address will be
+# allocated dynamically (if possible), but the host-specific information
+# will still come from the host declaration.
+
+#host passacaglia {
+# hardware ethernet 0:0:c0:5d:bd:95;
+# filename "vmunix.passacaglia";
+# server-name "toccata.fugue.com";
+#}
+
+# Fixed IP addresses can also be specified for hosts. These addresses
+# should not also be listed as being available for dynamic assignment.
+# Hosts for which fixed IP addresses have been specified can boot using
+# BOOTP or DHCP. Hosts for which no fixed address is specified can only
+# be booted with DHCP, unless there is an address range on the subnet
+# to which a BOOTP client is connected which has the dynamic-bootp flag
+# set.
+#host fantasia {
+# hardware ethernet 08:00:07:26:c0:a5;
+# fixed-address fantasia.fugue.com;
+#}
+
+# You can declare a class of clients and then do address allocation
+# based on that. The example below shows a case where all clients
+# in a certain class get addresses on the 10.17.224/24 subnet, and all
+# other clients get addresses on the 10.0.29/24 subnet.
+
+#class "foo" {
+# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
+#}
+
+#shared-network 224-29 {
+# subnet 10.17.224.0 netmask 255.255.255.0 {
+# option routers rtr-224.example.org;
+# }
+# subnet 10.0.29.0 netmask 255.255.255.0 {
+# option routers rtr-29.example.org;
+# }
+# pool {
+# allow members of "foo";
+# range 10.17.224.10 10.17.224.250;
+# }
+# pool {
+# deny members of "foo";
+# range 10.0.29.10 10.0.29.230;
+# }
+#}