diff --git a/meta/recipes-extended/pam/libpam/99_pam b/meta/recipes-extended/pam/libpam/99_pam
new file mode 100644
index 0000000..97e990d
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/99_pam
@@ -0,0 +1 @@
+d root root 0755 /var/run/sepermit none
diff --git a/meta/recipes-extended/pam/libpam/crypt_configure.patch b/meta/recipes-extended/pam/libpam/crypt_configure.patch
new file mode 100644
index 0000000..bec82a5
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/crypt_configure.patch
@@ -0,0 +1,31 @@
+This patch fixes a case where it find crypt defined in libc (musl) but
+not in specified libraries then it ends up assigning
+
+LIBCRYPT="-l" which then goes into makefile cause all sort of problems
+e.g.
+
+ld: cannot find -l-m32
+| collect2: error: ld returned 1 exit status
+
+The reason is that -l appears on commandline with out any library and
+compiler treats the next argument as library name whatever it is.
+
+
+Upstream-Status: Pending
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+
+Index: Linux-PAM-1.1.6/configure.in
+===================================================================
+--- Linux-PAM-1.1.6.org/configure.ac
++++ Linux-PAM-1.1.6/configure.ac
+@@ -400,7 +400,9 @@ AS_IF([test "x$ac_cv_header_xcrypt_h" =
+   [crypt_libs="crypt"])
+ 
+ BACKUP_LIBS=$LIBS
+-AC_SEARCH_LIBS([crypt],[$crypt_libs], LIBCRYPT="-l$ac_lib", LIBCRYPT="")
++AC_SEARCH_LIBS([crypt],[$crypt_libs],
++	       [test "$ac_cv_search_crypt" = "none required" ||
++		LIBCRYPT="$ac_cv_search_crypt"])
+ AC_CHECK_FUNCS(crypt_r crypt_gensalt_r)
+ LIBS=$BACKUP_LIBS
+ AC_SUBST(LIBCRYPT)
diff --git a/meta/recipes-extended/pam/libpam/fixsepbuild.patch b/meta/recipes-extended/pam/libpam/fixsepbuild.patch
new file mode 100644
index 0000000..8a9c3b2
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/fixsepbuild.patch
@@ -0,0 +1,24 @@
+Fix the build error when a separate build directory is used:
+
+Making install in xtestsmake[1]: Entering directory `/media/build1/poky/build1/tmp/work/i586-poky-linux/libpam/1.1.6-r2/build/xtests'/usr/bin/install -c -d /media/build1/poky/build1/tmp/work/i586-poky-linux/libpam/1.1.6-r2/image/usr/share/Linux-PAM/xtestsfor file in run-xtests.sh tst-pam_dispatch1.pamd tst-pam_dispatch2.pamd tst-pam_dispatch3.pamd tst-pam_dispatch4.pamd tst-pam_dispatch5.pamd tst-pam_cracklib1.pamd tst-pam_cracklib2.pamd tst-pam_unix1.pamd tst-pam_unix2.pamd tst-pam_unix3.pamd tst-pam_unix4.pamd tst-pam_unix1.sh tst-pam_unix2.sh tst-pam_unix3.sh tst-pam_unix4.sh access.conf tst-pam_access1.pamd tst-pam_access1.sh tst-pam_access2.pamd tst-pam_access2.sh tst-pam_access3.pamd tst-pam_access3.sh tst-pam_access4.pamd tst-pam_access4.sh limits.conf tst-pam_limits1.pamd tst-pam_limits1.sh tst-pam_succeed_if1.pamd tst-pam_succeed_if1.sh group.conf tst-pam_group1.pamd tst-pam_group1.sh tst-pam_authfail.pamd tst-pam_authsucceed.pamd tst-pam_substack1.pamd tst-pam_substack1a.pamd tst-pam_substack1.sh tst-pam_substack2.pamd tst-pam_substack2a.pamd tst-pam_substack2.sh tst-pam_substack3.pamd tst-pam_substack3a.pamd tst-pam_substack3.sh tst-pam_substack4.pamd tst-pam_substack4a.pamd tst-pam_substack4.sh tst-pam_substack5.pamd tst-pam_substack5a.pamd tst-pam_substack5.sh tst-pam_assemble_line1.pamd tst-pam_assemble_line1.sh tst-pam_pwhistory1.pamd tst-pam_pwhistory1.sh tst-pam_time1.pamd time.conf ; do \/usr/bin/install -c $file /media/build1/poky/build1/tmp/work/i586-poky-linux/libpam/1.1.6-r2/image/usr/share/Linux-PAM/xtests ; \	done
+/usr/bin/install: cannot stat `run-xtests.sh': No such file or directory
+/usr/bin/install: cannot stat `tst-pam_dispatch1.pamd': No such file or directory
+/usr/bin/install: cannot stat `tst-pam_dispatch2.pamd': No such file or directory
+
+Upstream-Status: Pending
+
+RP 2013/03/21
+
+Index: Linux-PAM-1.1.6/xtests/Makefile.am
+===================================================================
+--- Linux-PAM-1.1.6.orig/xtests/Makefile.am	2013-03-08 12:26:30.360266000 +0000
++++ Linux-PAM-1.1.6/xtests/Makefile.am	2013-03-21 11:39:58.557166650 +0000
+@@ -59,7 +59,7 @@
+ install_xtests:
+ 	$(INSTALL) -d $(DESTDIR)$(pkgdatadir)/xtests
+ 	for file in $(EXTRA_DIST) ; do \
+-		$(INSTALL) $$file $(DESTDIR)$(pkgdatadir)/xtests ; \
++		$(INSTALL) $(srcdir)/$$file $(DESTDIR)$(pkgdatadir)/xtests ; \
+ 	done
+ 	for file in $(XTESTS); do \
+ 		$(INSTALL) .libs/$$file $(DESTDIR)$(pkgdatadir)/xtests ; \
diff --git a/meta/recipes-extended/pam/libpam/libpam-xtests-remove-bash-dependency.patch b/meta/recipes-extended/pam/libpam/libpam-xtests-remove-bash-dependency.patch
new file mode 100644
index 0000000..680029a
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/libpam-xtests-remove-bash-dependency.patch
@@ -0,0 +1,226 @@
+From 555407ff6e2f742df64ae93859f14a0fc1397829 Mon Sep 17 00:00:00 2001
+From: Wenzong Fan <wenzong.fan@windriver.com>
+Date: Fri, 12 Sep 2014 05:35:05 -0400
+Subject: [PATCH] libpam/xtests: remove bash dependency
+
+There's not bash specific syntax in the xtest scripts:
+
+  # after below patches applied:
+  $ cd Linux-PAM-1.1.6/xtests
+  $ checkbashisms *.sh
+  No output
+
+Just remove the runtime dependency to bash.
+
+Upstream-Status: Pending
+
+Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
+---
+ xtests/run-xtests.sh             |    2 +-
+ xtests/tst-pam_access1.sh        |    2 +-
+ xtests/tst-pam_access2.sh        |    2 +-
+ xtests/tst-pam_access3.sh        |    2 +-
+ xtests/tst-pam_access4.sh        |    2 +-
+ xtests/tst-pam_assemble_line1.sh |    2 +-
+ xtests/tst-pam_group1.sh         |    2 +-
+ xtests/tst-pam_limits1.sh        |    2 +-
+ xtests/tst-pam_pwhistory1.sh     |    2 +-
+ xtests/tst-pam_substack1.sh      |    2 +-
+ xtests/tst-pam_substack2.sh      |    2 +-
+ xtests/tst-pam_substack3.sh      |    2 +-
+ xtests/tst-pam_substack4.sh      |    2 +-
+ xtests/tst-pam_substack5.sh      |    2 +-
+ xtests/tst-pam_succeed_if1.sh    |    2 +-
+ xtests/tst-pam_unix1.sh          |    2 +-
+ xtests/tst-pam_unix2.sh          |    2 +-
+ xtests/tst-pam_unix3.sh          |    2 +-
+ xtests/tst-pam_unix4.sh          |    2 +-
+ 19 files changed, 19 insertions(+), 19 deletions(-)
+
+diff --git a/xtests/run-xtests.sh b/xtests/run-xtests.sh
+index 3a89057..1cf8684 100755
+--- a/xtests/run-xtests.sh
++++ b/xtests/run-xtests.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ SRCDIR=$1
+ shift 1
+diff --git a/xtests/tst-pam_access1.sh b/xtests/tst-pam_access1.sh
+index 180d256..70521d2 100755
+--- a/xtests/tst-pam_access1.sh
++++ b/xtests/tst-pam_access1.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/groupadd tstpamaccess
+ /usr/sbin/useradd -G tstpamaccess -p '!!' tstpamaccess1
+diff --git a/xtests/tst-pam_access2.sh b/xtests/tst-pam_access2.sh
+index 0a30275..7e3e60f 100755
+--- a/xtests/tst-pam_access2.sh
++++ b/xtests/tst-pam_access2.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/groupadd tstpamaccess
+ /usr/sbin/useradd -p '!!' tstpamaccess2
+diff --git a/xtests/tst-pam_access3.sh b/xtests/tst-pam_access3.sh
+index 348e0c3..3630e2e 100755
+--- a/xtests/tst-pam_access3.sh
++++ b/xtests/tst-pam_access3.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/useradd -p '!!' tstpamaccess3
+ ./tst-pam_access3
+diff --git a/xtests/tst-pam_access4.sh b/xtests/tst-pam_access4.sh
+index 61e7b44..4538df4 100755
+--- a/xtests/tst-pam_access4.sh
++++ b/xtests/tst-pam_access4.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/useradd -p '!!' tstpamaccess4
+ ./tst-pam_access4
+diff --git a/xtests/tst-pam_assemble_line1.sh b/xtests/tst-pam_assemble_line1.sh
+index 248d47e..dc2a675 100755
+--- a/xtests/tst-pam_assemble_line1.sh
++++ b/xtests/tst-pam_assemble_line1.sh
+@@ -1,3 +1,3 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ exec ./tst-pam_authfail tst-pam_assemble_line1
+diff --git a/xtests/tst-pam_group1.sh b/xtests/tst-pam_group1.sh
+index b76377f..44faca9 100755
+--- a/xtests/tst-pam_group1.sh
++++ b/xtests/tst-pam_group1.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/groupadd tstpamgrpg
+ /usr/sbin/useradd -p '!!' tstpamgrp
+diff --git a/xtests/tst-pam_limits1.sh b/xtests/tst-pam_limits1.sh
+index 4faa822..32c021d 100755
+--- a/xtests/tst-pam_limits1.sh
++++ b/xtests/tst-pam_limits1.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/useradd -p '!!' tstpamlimits
+ ./tst-pam_limits1
+diff --git a/xtests/tst-pam_pwhistory1.sh b/xtests/tst-pam_pwhistory1.sh
+index ddb3b8b..0f212e2 100644
+--- a/xtests/tst-pam_pwhistory1.sh
++++ b/xtests/tst-pam_pwhistory1.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/useradd tstpampwhistory
+ ./tst-pam_pwhistory1
+diff --git a/xtests/tst-pam_substack1.sh b/xtests/tst-pam_substack1.sh
+index 5260175..f1b72a7 100755
+--- a/xtests/tst-pam_substack1.sh
++++ b/xtests/tst-pam_substack1.sh
+@@ -1,3 +1,3 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ exec ./tst-pam_authfail tst-pam_substack1
+diff --git a/xtests/tst-pam_substack2.sh b/xtests/tst-pam_substack2.sh
+index c02f597..3804fa7 100755
+--- a/xtests/tst-pam_substack2.sh
++++ b/xtests/tst-pam_substack2.sh
+@@ -1,3 +1,3 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ exec ./tst-pam_authsucceed tst-pam_substack2
+diff --git a/xtests/tst-pam_substack3.sh b/xtests/tst-pam_substack3.sh
+index 0e572aa..aa48e8e 100755
+--- a/xtests/tst-pam_substack3.sh
++++ b/xtests/tst-pam_substack3.sh
+@@ -1,3 +1,3 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ exec ./tst-pam_authsucceed tst-pam_substack3
+diff --git a/xtests/tst-pam_substack4.sh b/xtests/tst-pam_substack4.sh
+index a3ef08a..958a07a 100755
+--- a/xtests/tst-pam_substack4.sh
++++ b/xtests/tst-pam_substack4.sh
+@@ -1,3 +1,3 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ exec ./tst-pam_authsucceed tst-pam_substack4
+diff --git a/xtests/tst-pam_substack5.sh b/xtests/tst-pam_substack5.sh
+index e2714fd..7e0da74 100755
+--- a/xtests/tst-pam_substack5.sh
++++ b/xtests/tst-pam_substack5.sh
+@@ -1,3 +1,3 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ exec ./tst-pam_authfail tst-pam_substack5
+diff --git a/xtests/tst-pam_succeed_if1.sh b/xtests/tst-pam_succeed_if1.sh
+index a643b2e..58e57b4 100755
+--- a/xtests/tst-pam_succeed_if1.sh
++++ b/xtests/tst-pam_succeed_if1.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/useradd -p '!!' tstpamtest
+ /usr/sbin/useradd -p '!!' pamtest
+diff --git a/xtests/tst-pam_unix1.sh b/xtests/tst-pam_unix1.sh
+index f75bd84..72deac0 100755
+--- a/xtests/tst-pam_unix1.sh
++++ b/xtests/tst-pam_unix1.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ /usr/sbin/useradd -p '!!' tstpamunix
+ ./tst-pam_unix1
+diff --git a/xtests/tst-pam_unix2.sh b/xtests/tst-pam_unix2.sh
+index 7093155..c04d6e6 100755
+--- a/xtests/tst-pam_unix2.sh
++++ b/xtests/tst-pam_unix2.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ # pamunix0 = 0aXKZztA.d1KY
+ /usr/sbin/useradd -p 0aXKZztA.d1KY  tstpamunix
+diff --git a/xtests/tst-pam_unix3.sh b/xtests/tst-pam_unix3.sh
+index ef4a07c..b52db2b 100755
+--- a/xtests/tst-pam_unix3.sh
++++ b/xtests/tst-pam_unix3.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ # pamunix01 = 0aXKZztA.d1KYIuFXArmd2jU
+ /usr/sbin/useradd -p 0aXKZztA.d1KYIuFXArmd2jU tstpamunix
+diff --git a/xtests/tst-pam_unix4.sh b/xtests/tst-pam_unix4.sh
+index 787c2f9..e7976fd 100755
+--- a/xtests/tst-pam_unix4.sh
++++ b/xtests/tst-pam_unix4.sh
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ 
+ # pamunix01 = 0aXKZztA.d1KYIuFXArmd2jU
+ /usr/sbin/useradd -p 0aXKZztA.d1KYIuFXArmd2jU tstpamunix
+-- 
+1.7.9.5
+
diff --git a/meta/recipes-extended/pam/libpam/libpam-xtests.patch b/meta/recipes-extended/pam/libpam/libpam-xtests.patch
new file mode 100644
index 0000000..be68745
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/libpam-xtests.patch
@@ -0,0 +1,35 @@
+This patch is used to create a new sub package libpam-xtests to do more checks.
+
+Upstream-Status: Pending
+
+Signed-off-by: Kang Kai <kai.kang@windriver.com>
+--- Linux-PAM-1.1.4/xtests/Makefile.am.orig	2011-07-19 17:00:09.619980001 +0800
++++ Linux-PAM-1.1.4/xtests/Makefile.am	2011-07-19 16:54:00.229979998 +0800
+@@ -7,7 +7,7 @@
+ AM_LDFLAGS = -L$(top_builddir)/libpam -lpam \
+ 	-L$(top_builddir)/libpam_misc -lpam_misc
+ 
+-CLEANFILES = *~ $(XTESTS)
++CLEANFILES = *~
+ 
+ EXTRA_DIST = run-xtests.sh tst-pam_dispatch1.pamd tst-pam_dispatch2.pamd \
+ 	tst-pam_dispatch3.pamd tst-pam_dispatch4.pamd \
+@@ -51,3 +51,18 @@
+ 
+ xtests: $(XTESTS) run-xtests.sh
+ 	"$(srcdir)"/run-xtests.sh "$(srcdir)" ${XTESTS} ${NOSRCTESTS}
++
++all: $(XTESTS)
++
++install: install_xtests
++
++install_xtests:
++	$(INSTALL) -d $(DESTDIR)$(pkgdatadir)/xtests
++	for file in $(EXTRA_DIST) ; do \
++		$(INSTALL) $$file $(DESTDIR)$(pkgdatadir)/xtests ; \
++	done
++	for file in $(XTESTS); do \
++		$(INSTALL) .libs/$$file $(DESTDIR)$(pkgdatadir)/xtests ; \
++	done
++
++.PHONY: all install_xtests
diff --git a/meta/recipes-extended/pam/libpam/pam-no-innetgr.patch b/meta/recipes-extended/pam/libpam/pam-no-innetgr.patch
new file mode 100644
index 0000000..5e551ac
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam-no-innetgr.patch
@@ -0,0 +1,97 @@
+innetgr may not be there so make sure that when innetgr is not present
+then we inform about it and not use it.
+
+-Khem
+
+Upstream-Status: Pending
+
+Signed-off-by: Scott Garman <scott.a.garman@intel.com>
+
+Index: Linux-PAM-1.1.3/modules/pam_group/pam_group.c
+===================================================================
+--- Linux-PAM-1.1.3.orig/modules/pam_group/pam_group.c
++++ Linux-PAM-1.1.3/modules/pam_group/pam_group.c
+@@ -659,7 +659,11 @@ static int check_account(pam_handle_t *p
+ 	}
+ 	/* If buffer starts with @, we are using netgroups */
+ 	if (buffer[0] == '@')
+-	  good &= innetgr (&buffer[1], NULL, user, NULL);
++#ifdef HAVE_INNETGR
++           good &= innetgr (&buffer[1], NULL, user, NULL);
++#else
++           pam_syslog (pamh, LOG_ERR, "pam_group does not have netgroup support");
++#endif
+ 	/* otherwise, if the buffer starts with %, it's a UNIX group */
+ 	else if (buffer[0] == '%')
+           good &= pam_modutil_user_in_group_nam_nam(pamh, user, &buffer[1]);
+Index: Linux-PAM-1.1.3/modules/pam_time/pam_time.c
+===================================================================
+--- Linux-PAM-1.1.3.orig/modules/pam_time/pam_time.c
++++ Linux-PAM-1.1.3/modules/pam_time/pam_time.c
+@@ -555,9 +555,13 @@ check_account(pam_handle_t *pamh, const
+ 	  }
+ 	  /* If buffer starts with @, we are using netgroups */
+ 	  if (buffer[0] == '@')
+-	    good &= innetgr (&buffer[1], NULL, user, NULL);
++#ifdef HAVE_INNETGR
++	       good &= innetgr (&buffer[1], NULL, user, NULL);
++#else
++	       pam_syslog (pamh, LOG_ERR, "pam_time does not have netgroup support");
++#endif
+ 	  else
+-	    good &= logic_field(pamh, user, buffer, count, is_same);
++	       good &= logic_field(pamh, user, buffer, count, is_same);
+ 	  D(("with user: %s", good ? "passes":"fails" ));
+ 
+ 	  /* here we get the time field */
+Index: Linux-PAM-1.1.3/modules/pam_succeed_if/pam_succeed_if.c
+===================================================================
+--- Linux-PAM-1.1.3.orig/modules/pam_succeed_if/pam_succeed_if.c
++++ Linux-PAM-1.1.3/modules/pam_succeed_if/pam_succeed_if.c
+@@ -231,18 +231,27 @@ evaluate_notingroup(pam_handle_t *pamh,
+ }
+ /* Return PAM_SUCCESS if the (host,user) is in the netgroup. */
+ static int
+-evaluate_innetgr(const char *host, const char *user, const char *group)
++evaluate_innetgr(const pam_handle_t* pamh, const char *host, const char *user, const char *group)
+ {
++#ifdef HAVE_INNETGR
+ 	if (innetgr(group, host, user, NULL) == 1)
+ 		return PAM_SUCCESS;
++#else
++        pam_syslog (pamh, LOG_ERR, "pam_succeed_if does not have netgroup support");
++#endif
++
+ 	return PAM_AUTH_ERR;
+ }
+ /* Return PAM_SUCCESS if the (host,user) is NOT in the netgroup. */
+ static int
+-evaluate_notinnetgr(const char *host, const char *user, const char *group)
++evaluate_notinnetgr(const pam_handle_t* pamh, const char *host, const char *user, const char *group)
+ {
++#ifdef HAVE_INNETGR
+ 	if (innetgr(group, host, user, NULL) == 0)
+ 		return PAM_SUCCESS;
++#else
++	pam_syslog (pamh, LOG_ERR, "pam_succeed_if does not have netgroup support");
++#endif
+ 	return PAM_AUTH_ERR;
+ }
+ 
+@@ -361,14 +370,14 @@ evaluate(pam_handle_t *pamh, int debug,
+ 		const void *rhost;
+ 		if (pam_get_item(pamh, PAM_RHOST, &rhost) != PAM_SUCCESS)
+ 			rhost = NULL;
+-		return evaluate_innetgr(rhost, user, right);
++		return evaluate_innetgr(pamh, rhost, user, right);
+ 	}
+ 	/* (Rhost, user) is not in this group. */
+ 	if (strcasecmp(qual, "notinnetgr") == 0) {
+ 		const void *rhost;
+ 		if (pam_get_item(pamh, PAM_RHOST, &rhost) != PAM_SUCCESS)
+ 			rhost = NULL;
+-		return evaluate_notinnetgr(rhost, user, right);
++		return evaluate_notinnetgr(pamh, rhost, user, right);
+ 	}
+ 	/* Fail closed. */
+ 	return PAM_SERVICE_ERR;
diff --git a/meta/recipes-extended/pam/libpam/pam-security-abstract-securetty-handling.patch b/meta/recipes-extended/pam/libpam/pam-security-abstract-securetty-handling.patch
new file mode 100644
index 0000000..f1834f6
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam-security-abstract-securetty-handling.patch
@@ -0,0 +1,200 @@
+Description: extract the securetty logic for use with the "nullok_secure" option
+ introduced in the "055_pam_unix_nullok_secure" patch.
+
+Upstream-Status: Pending
+
+Signed-off-by: Ming Liu <ming.liu@windriver.com>
+===================================================================
+diff -urpN a/modules/pam_securetty/Makefile.am b/modules/pam_securetty/Makefile.am
+--- a/modules/pam_securetty/Makefile.am	2013-07-05 11:08:23.224483237 +0800
++++ b/modules/pam_securetty/Makefile.am	2013-07-05 11:15:21.304486456 +0800
+@@ -24,6 +24,10 @@ endif
+ securelib_LTLIBRARIES = pam_securetty.la
+ pam_securetty_la_LIBADD = -L$(top_builddir)/libpam -lpam
+ 
++pam_securetty_la_SOURCES =	\
++	pam_securetty.c		\
++	tty_secure.c
++
+ if ENABLE_REGENERATE_MAN
+ noinst_DATA = README
+ README: pam_securetty.8.xml
+diff -urpN a/modules/pam_securetty/pam_securetty.c b/modules/pam_securetty/pam_securetty.c
+--- a/modules/pam_securetty/pam_securetty.c	2013-07-05 11:07:50.064483568 +0800
++++ b/modules/pam_securetty/pam_securetty.c	2013-07-05 11:12:23.994483344 +0800
+@@ -1,7 +1,5 @@
+ /* pam_securetty module */
+ 
+-#define SECURETTY_FILE "/etc/securetty"
+-#define TTY_PREFIX     "/dev/"
+ #define CMDLINE_FILE   "/proc/cmdline"
+ #define CONSOLEACTIVE_FILE	"/sys/class/tty/console/active"
+ 
+@@ -40,6 +38,9 @@
+ #include <security/pam_modutil.h>
+ #include <security/pam_ext.h>
+ 
++extern int _pammodutil_tty_secure(const pam_handle_t *pamh,
++                                  const char *uttyname);
++
+ #define PAM_DEBUG_ARG       0x0001
+ #define PAM_NOCONSOLE_ARG   0x0002
+ 
+@@ -73,11 +74,7 @@ securetty_perform_check (pam_handle_t *p
+     const char *username;
+     const char *uttyname;
+     const void *void_uttyname;
+-    char ttyfileline[256];
+-    char ptname[256];
+-    struct stat ttyfileinfo;
+     struct passwd *user_pwd;
+-    FILE *ttyfile;
+ 
+     /* log a trail for debugging */
+     if (ctrl & PAM_DEBUG_ARG) {
+@@ -105,50 +102,7 @@ securetty_perform_check (pam_handle_t *p
+ 	return PAM_SERVICE_ERR;
+     }
+ 
+-    /* The PAM_TTY item may be prefixed with "/dev/" - skip that */
+-    if (strncmp(TTY_PREFIX, uttyname, sizeof(TTY_PREFIX)-1) == 0) {
+-	uttyname += sizeof(TTY_PREFIX)-1;
+-    }
+-
+-    if (stat(SECURETTY_FILE, &ttyfileinfo)) {
+-	pam_syslog(pamh, LOG_NOTICE, "Couldn't open %s: %m", SECURETTY_FILE);
+-	return PAM_SUCCESS; /* for compatibility with old securetty handling,
+-			       this needs to succeed.  But we still log the
+-			       error. */
+-    }
+-
+-    if ((ttyfileinfo.st_mode & S_IWOTH) || !S_ISREG(ttyfileinfo.st_mode)) {
+-	/* If the file is world writable or is not a
+-	   normal file, return error */
+-	pam_syslog(pamh, LOG_ERR,
+-		   "%s is either world writable or not a normal file",
+-		   SECURETTY_FILE);
+-	return PAM_AUTH_ERR;
+-    }
+-
+-    ttyfile = fopen(SECURETTY_FILE,"r");
+-    if (ttyfile == NULL) { /* Check that we opened it successfully */
+-	pam_syslog(pamh, LOG_ERR, "Error opening %s: %m", SECURETTY_FILE);
+-	return PAM_SERVICE_ERR;
+-    }
+-
+-    if (isdigit(uttyname[0])) {
+-	snprintf(ptname, sizeof(ptname), "pts/%s", uttyname);
+-    } else {
+-	ptname[0] = '\0';
+-    }
+-
+-    retval = 1;
+-
+-    while ((fgets(ttyfileline, sizeof(ttyfileline)-1, ttyfile) != NULL)
+-	   && retval) {
+-	if (ttyfileline[strlen(ttyfileline) - 1] == '\n')
+-	    ttyfileline[strlen(ttyfileline) - 1] = '\0';
+-
+-	retval = ( strcmp(ttyfileline, uttyname)
+-		   && (!ptname[0] || strcmp(ptname, uttyname)) );
+-    }
+-    fclose(ttyfile);
++    retval = _pammodutil_tty_secure(pamh, uttyname);
+ 
+     if (retval && !(ctrl & PAM_NOCONSOLE_ARG)) {
+         FILE *cmdlinefile;
+diff -urpN a/modules/pam_securetty/tty_secure.c b/modules/pam_securetty/tty_secure.c
+--- a/modules/pam_securetty/tty_secure.c	1970-01-01 08:30:00.000000000 +0830
++++ b/modules/pam_securetty/tty_secure.c	2013-07-05 11:14:21.534482900 +0800
+@@ -0,0 +1,90 @@
++/*
++ * A function to determine if a particular line is in /etc/securetty
++ */
++
++
++#define SECURETTY_FILE "/etc/securetty"
++#define TTY_PREFIX     "/dev/"
++
++/* This function taken out of pam_securetty by Sam Hartman
++ * <hartmans@debian.org>*/
++/*
++ * by Elliot Lee <sopwith@redhat.com>, Red Hat Software.
++ * July 25, 1996.
++ * Slight modifications AGM. 1996/12/3
++ */
++
++#include <unistd.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++#include <security/pam_modules.h>
++#include <stdarg.h>
++#include <syslog.h>
++#include <sys/syslog.h>
++#include <stdio.h>
++#include <string.h>
++#include <stdlib.h>
++#include <ctype.h>
++#include <security/pam_modutil.h>
++#include <security/pam_ext.h>
++
++extern int _pammodutil_tty_secure(const pam_handle_t *pamh,
++                                  const char *uttyname);
++
++int _pammodutil_tty_secure(const pam_handle_t *pamh, const char *uttyname)
++{
++    int retval = PAM_AUTH_ERR;
++    char ttyfileline[256];
++    char ptname[256];
++    struct stat ttyfileinfo;
++    FILE *ttyfile;
++    /* The PAM_TTY item may be prefixed with "/dev/" - skip that */
++    if (strncmp(TTY_PREFIX, uttyname, sizeof(TTY_PREFIX)-1) == 0)
++	uttyname += sizeof(TTY_PREFIX)-1;
++
++    if (stat(SECURETTY_FILE, &ttyfileinfo)) {
++	pam_syslog(pamh, LOG_NOTICE, "Couldn't open %s: %m",
++	           SECURETTY_FILE);
++	return PAM_SUCCESS; /* for compatibility with old securetty handling,
++			       this needs to succeed.  But we still log the
++			       error. */
++    }
++
++    if ((ttyfileinfo.st_mode & S_IWOTH) || !S_ISREG(ttyfileinfo.st_mode)) {
++	/* If the file is world writable or is not a
++	   normal file, return error */
++	pam_syslog(pamh, LOG_ERR,
++	           "%s is either world writable or not a normal file",
++	           SECURETTY_FILE);
++	return PAM_AUTH_ERR;
++    }
++
++    ttyfile = fopen(SECURETTY_FILE,"r");
++    if(ttyfile == NULL) { /* Check that we opened it successfully */
++	pam_syslog(pamh, LOG_ERR, "Error opening %s: %m", SECURETTY_FILE);
++	return PAM_SERVICE_ERR;
++    }
++
++    if (isdigit(uttyname[0])) {
++	snprintf(ptname, sizeof(ptname), "pts/%s", uttyname);
++    } else {
++	ptname[0] = '\0';
++    }
++
++    retval = 1;
++
++    while ((fgets(ttyfileline,sizeof(ttyfileline)-1, ttyfile) != NULL) 
++	   && retval) {
++	if(ttyfileline[strlen(ttyfileline) - 1] == '\n')
++	    ttyfileline[strlen(ttyfileline) - 1] = '\0';
++	retval = ( strcmp(ttyfileline,uttyname)
++	           && (!ptname[0] || strcmp(ptname, uttyname)) );
++    }
++    fclose(ttyfile);
++
++    if(retval) {
++	retval = PAM_AUTH_ERR;
++    }
++
++    return retval;
++}
diff --git a/meta/recipes-extended/pam/libpam/pam-unix-nullok-secure.patch b/meta/recipes-extended/pam/libpam/pam-unix-nullok-secure.patch
new file mode 100644
index 0000000..3241e82
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam-unix-nullok-secure.patch
@@ -0,0 +1,240 @@
+From 9bdc197474795f2d000c2bc04f58f7cef8898f21 Mon Sep 17 00:00:00 2001
+From: Amarnath Valluri <amarnath.valluri@intel.com>
+Date: Wed, 15 Jul 2015 13:07:20 +0300
+Subject: [PATCH] Debian patch to add a new 'nullok_secure' option to pam_unix,
+ which accepts users with null passwords only when the applicant is connected
+ from a tty listed in /etc/securetty.
+
+Authors: Sam Hartman <hartmans@debian.org>,
+         Steve Langasek <vorlon@debian.org>
+
+Upstream-Status: Pending
+
+Signed-off-by: Ming Liu <ming.liu@windriver.com>
+
+v2:
+	- Forward ported from v1.1.6 to v1.2.1
+
+Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
+---
+ modules/pam_unix/Makefile.am    |  3 ++-
+ modules/pam_unix/README         | 11 ++++++++++-
+ modules/pam_unix/pam_unix.8     |  9 ++++++++-
+ modules/pam_unix/pam_unix.8.xml | 19 ++++++++++++++++++-
+ modules/pam_unix/support.c      | 40 +++++++++++++++++++++++++++++++++++-----
+ modules/pam_unix/support.h      |  8 ++++++--
+ 6 files changed, 79 insertions(+), 11 deletions(-)
+
+diff --git a/modules/pam_unix/Makefile.am b/modules/pam_unix/Makefile.am
+index 56ed591..9a372ac 100644
+--- a/modules/pam_unix/Makefile.am
++++ b/modules/pam_unix/Makefile.am
+@@ -30,7 +30,8 @@ if HAVE_VERSIONING
+   pam_unix_la_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map
+ endif
+ pam_unix_la_LIBADD = $(top_builddir)/libpam/libpam.la \
+-	@LIBCRYPT@ @LIBSELINUX@ $(NIS_LIBS)
++	@LIBCRYPT@ @LIBSELINUX@ $(NIS_LIBS) \
++	../pam_securetty/tty_secure.lo
+ 
+ securelib_LTLIBRARIES = pam_unix.la
+ 
+diff --git a/modules/pam_unix/README b/modules/pam_unix/README
+index 3935dba..7880d91 100644
+--- a/modules/pam_unix/README
++++ b/modules/pam_unix/README
+@@ -67,7 +67,16 @@ nullok
+ 
+     The default action of this module is to not permit the user access to a
+     service if their official password is blank. The nullok argument overrides
+-    this default.
++    this default and allows any user with a blank password to access the
++    service.
++
++nullok_secure
++
++    The default action of this module is to not permit the user access to a
++    service if their official password is blank. The nullok_secure argument
++    overrides this default and allows any user with a blank password to access
++    the service as long as the value of PAM_TTY is set to one of the values
++    found in /etc/securetty.
+ 
+ try_first_pass
+ 
+diff --git a/modules/pam_unix/pam_unix.8 b/modules/pam_unix/pam_unix.8
+index 339178b..a4bd906 100644
+--- a/modules/pam_unix/pam_unix.8
++++ b/modules/pam_unix/pam_unix.8
+@@ -92,7 +92,14 @@ Turns off informational messages namely messages about session open and close vi
+ .RS 4
+ The default action of this module is to not permit the user access to a service if their official password is blank\&. The
+ \fBnullok\fR
+-argument overrides this default\&.
++argument overrides this default and allows any user with a blank password to access the service\&.
++.RE
++.PP
++\fBnullok_secure\fR
++.RS 4
++The default action of this module is to not permit the user access to a service if their official password is blank\&. The
++\fBnullok_secure\fR
++argument overrides this default and allows any user with a blank password to access the service as long as the value of PAM_TTY is set to one of the values found in /etc/securetty\&.
+ .RE
+ .PP
+ \fBtry_first_pass\fR
+diff --git a/modules/pam_unix/pam_unix.8.xml b/modules/pam_unix/pam_unix.8.xml
+index a8b64bb..1ced6f4 100644
+--- a/modules/pam_unix/pam_unix.8.xml
++++ b/modules/pam_unix/pam_unix.8.xml
+@@ -159,7 +159,24 @@
+           <para>
+             The default action of this module is to not permit the
+             user access to a service if their official password is blank.
+-            The <option>nullok</option> argument overrides this default.
++            The <option>nullok</option> argument overrides this default
++            and allows any user with a blank password to access the
++            service.
++          </para>
++        </listitem>
++      </varlistentry>
++      <varlistentry>
++        <term>
++          <option>nullok_secure</option>
++        </term>
++        <listitem>
++          <para>
++            The default action of this module is to not permit the
++            user access to a service if their official password is blank.
++            The <option>nullok_secure</option> argument overrides this
++            default and allows any user with a blank password to access
++            the service as long as the value of PAM_TTY is set to one of
++            the values found in /etc/securetty.
+           </para>
+         </listitem>
+       </varlistentry>
+diff --git a/modules/pam_unix/support.c b/modules/pam_unix/support.c
+index abccd82..2361957 100644
+--- a/modules/pam_unix/support.c
++++ b/modules/pam_unix/support.c
+@@ -189,13 +189,22 @@ int _set_ctrl(pam_handle_t *pamh, int flags, int *remember, int *rounds,
+ 	/* now parse the arguments to this module */
+ 
+ 	for (; argc-- > 0; ++argv) {
++		int sl;
+ 
+ 		D(("pam_unix arg: %s", *argv));
+ 
+ 		for (j = 0; j < UNIX_CTRLS_; ++j) {
+-			if (unix_args[j].token
+-			    && !strncmp(*argv, unix_args[j].token, strlen(unix_args[j].token))) {
+-				break;
++			if (unix_args[j].token) {
++				sl = strlen(unix_args[j].token);
++				if (unix_args[j].token[sl-1] == '=') {
++					/* exclude argument from comparison */
++					if (!strncmp(*argv, unix_args[j].token, sl))
++						break;
++				} else {
++				/* compare full strings */
++					if (!strcmp(*argv, unix_args[j].token))
++						break;
++				}
+ 			}
+ 		}
+ 
+@@ -566,6 +575,7 @@ static int _unix_run_helper_binary(pam_handle_t *pamh, const char *passwd,
+     if (child == 0) {
+ 	static char *envp[] = { NULL };
+ 	const char *args[] = { NULL, NULL, NULL, NULL };
++	int nullok = off(UNIX__NONULL, ctrl);
+ 
+ 	/* XXX - should really tidy up PAM here too */
+ 
+@@ -593,7 +603,16 @@ static int _unix_run_helper_binary(pam_handle_t *pamh, const char *passwd,
+ 	/* exec binary helper */
+ 	args[0] = CHKPWD_HELPER;
+ 	args[1] = user;
+-	if (off(UNIX__NONULL, ctrl)) {	/* this means we've succeeded */
++	if (on(UNIX_NULLOK_SECURE, ctrl)) {
++		const void *uttyname;
++		retval = pam_get_item(pamh, PAM_TTY, &uttyname);
++		if (retval != PAM_SUCCESS || uttyname == NULL
++			|| _pammodutil_tty_secure(pamh, (const char *)uttyname) != PAM_SUCCESS) {
++			nullok = 0;
++		}
++	}
++
++	if (nullok) {
+ 	  args[2]="nullok";
+ 	} else {
+ 	  args[2]="nonull";
+@@ -678,6 +697,17 @@ _unix_blankpasswd (pam_handle_t *pamh, unsigned int ctrl, const char *name)
+ 	if (on(UNIX__NONULL, ctrl))
+ 		return 0;	/* will fail but don't let on yet */
+ 
++	if (on(UNIX_NULLOK_SECURE, ctrl)) {
++		int retval2;
++		const void *uttyname;
++		retval2 = pam_get_item(pamh, PAM_TTY, &uttyname);
++		if (retval2 != PAM_SUCCESS || uttyname == NULL)
++			return 0;
++
++		if (_pammodutil_tty_secure(pamh, (const char *)uttyname) != PAM_SUCCESS)
++			return 0;
++	}
++
+ 	/* UNIX passwords area */
+ 
+ 	retval = get_pwd_hash(pamh, name, &pwd, &salt);
+@@ -764,7 +794,7 @@ int _unix_verify_password(pam_handle_t * pamh, const char *name
+ 			}
+ 		}
+ 	} else {
+-		retval = verify_pwd_hash(p, salt, off(UNIX__NONULL, ctrl));
++		retval = verify_pwd_hash(p, salt, _unix_blankpasswd(pamh, ctrl, name));
+ 	}
+ 
+ 	if (retval == PAM_SUCCESS) {
+diff --git a/modules/pam_unix/support.h b/modules/pam_unix/support.h
+index 3729ce0..43cdbea 100644
+--- a/modules/pam_unix/support.h
++++ b/modules/pam_unix/support.h
+@@ -99,8 +99,9 @@ typedef struct {
+ #define UNIX_MIN_PASS_LEN        27	/* min length for password */
+ #define UNIX_QUIET		 28	/* Don't print informational messages */
+ #define UNIX_DES                 29     /* DES, default */
++#define UNIX_NULLOK_SECURE       30     /* NULL passwords allowed only on secure ttys */
+ /* -------------- */
+-#define UNIX_CTRLS_              30	/* number of ctrl arguments defined */
++#define UNIX_CTRLS_              31	/* number of ctrl arguments defined */
+ 
+ #define UNIX_DES_CRYPT(ctrl)	(off(UNIX_MD5_PASS,ctrl)&&off(UNIX_BIGCRYPT,ctrl)&&off(UNIX_SHA256_PASS,ctrl)&&off(UNIX_SHA512_PASS,ctrl)&&off(UNIX_BLOWFISH_PASS,ctrl))
+ 
+@@ -118,7 +119,7 @@ static const UNIX_Ctrls unix_args[UNIX_CTRLS_] =
+ /* UNIX_NOT_SET_PASS */    {"not_set_pass",    _ALL_ON_,                0100, 0},
+ /* UNIX__PRELIM */         {NULL,              _ALL_ON_^(0600),         0200, 0},
+ /* UNIX__UPDATE */         {NULL,              _ALL_ON_^(0600),         0400, 0},
+-/* UNIX__NONULL */         {NULL,              _ALL_ON_,               01000, 0},
++/* UNIX__NONULL */         {NULL,              _ALL_ON_^(02000000000),   01000, 0},
+ /* UNIX__QUIET */          {NULL,              _ALL_ON_,               02000, 0},
+ /* UNIX_USE_AUTHTOK */     {"use_authtok",     _ALL_ON_,               04000, 0},
+ /* UNIX_SHADOW */          {"shadow",          _ALL_ON_,              010000, 0},
+@@ -139,6 +140,7 @@ static const UNIX_Ctrls unix_args[UNIX_CTRLS_] =
+ /* UNIX_MIN_PASS_LEN */    {"minlen=",		_ALL_ON_,         0400000000, 0},
+ /* UNIX_QUIET */           {"quiet",           _ALL_ON_,         01000000000, 0},
+ /* UNIX_DES */             {"des",             _ALL_ON_^(0260420000),      0, 1},
++/* UNIX_NULLOK_SECURE */   {"nullok_secure",   _ALL_ON_^(01000),  02000000000, 0},
+ };
+ 
+ #define UNIX_DEFAULTS  (unix_args[UNIX__NONULL].flag)
+@@ -171,6 +173,8 @@ extern int _unix_read_password(pam_handle_t * pamh
+ 			,const char *prompt2
+ 			,const char *data_name
+ 			,const void **pass);
++extern int _pammodutil_tty_secure(const pam_handle_t *pamh,
++         const char *uttyname);
+ 
+ extern int _unix_run_verify_binary(pam_handle_t *pamh,
+ 			unsigned int ctrl, const char *user, int *daysleft);
+-- 
+2.1.4
+
diff --git a/meta/recipes-extended/pam/libpam/pam.d/common-account b/meta/recipes-extended/pam/libpam/pam.d/common-account
new file mode 100644
index 0000000..316b173
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam.d/common-account
@@ -0,0 +1,25 @@
+#
+# /etc/pam.d/common-account - authorization settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authorization modules that define
+# the central access policy for use on the system.  The default is to
+# only deny service to users whose accounts are expired in /etc/shadow.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+#
+
+# here are the per-package modules (the "Primary" block)
+account	[success=1 new_authtok_reqd=done default=ignore]	pam_unix.so 
+# here's the fallback if no module succeeds
+account	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+account	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config
diff --git a/meta/recipes-extended/pam/libpam/pam.d/common-auth b/meta/recipes-extended/pam/libpam/pam.d/common-auth
new file mode 100644
index 0000000..460b69f
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam.d/common-auth
@@ -0,0 +1,18 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+
+# here are the per-package modules (the "Primary" block)
+auth	[success=1 default=ignore]	pam_unix.so nullok_secure
+# here's the fallback if no module succeeds
+auth	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+auth	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
diff --git a/meta/recipes-extended/pam/libpam/pam.d/common-password b/meta/recipes-extended/pam/libpam/pam.d/common-password
new file mode 100644
index 0000000..3896057
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam.d/common-password
@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-password - password-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define the services to be
+# used to change user passwords.  The default is pam_unix.
+
+# Explanation of pam_unix options:
+#
+# The "sha512" option enables salted SHA512 passwords.  Without this option,
+# the default is Unix crypt.  Prior releases used the option "md5".
+#
+# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
+# login.defs.
+#
+# See the pam_unix manpage for other options.
+
+# here are the per-package modules (the "Primary" block)
+password	[success=1 default=ignore]	pam_unix.so obscure sha512
+# here's the fallback if no module succeeds
+password	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+password	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
diff --git a/meta/recipes-extended/pam/libpam/pam.d/common-session b/meta/recipes-extended/pam/libpam/pam.d/common-session
new file mode 100644
index 0000000..a4a551f
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam.d/common-session
@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session - session-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of sessions of *any* kind (both interactive and
+# non-interactive).
+#
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so
diff --git a/meta/recipes-extended/pam/libpam/pam.d/common-session-noninteractive b/meta/recipes-extended/pam/libpam/pam.d/common-session-noninteractive
new file mode 100644
index 0000000..b110bb2
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam.d/common-session-noninteractive
@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session-noninteractive - session-related modules
+# common to all non-interactive services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of all non-interactive sessions.
+#
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so 
diff --git a/meta/recipes-extended/pam/libpam/pam.d/other b/meta/recipes-extended/pam/libpam/pam.d/other
new file mode 100644
index 0000000..ec970ec
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam/pam.d/other
@@ -0,0 +1,24 @@
+#
+# /etc/pam.d/other - specify the PAM fallback behaviour
+#
+# Note that this file is used for any unspecified service; for example
+#if /etc/pam.d/cron  specifies no session modules but cron calls
+#pam_open_session, the session module out of /etc/pam.d/other is
+#used.  
+
+# We use pam_warn.so to generate syslog notes that the 'other'
+#fallback rules are being used (as a hint to suggest you should setup
+#specific PAM rules for the service and aid to debugging). Then to be
+#secure, deny access to all services by default. 
+
+auth       required     pam_warn.so
+auth       required     pam_deny.so
+
+account    required     pam_warn.so
+account    required     pam_deny.so
+
+password   required     pam_warn.so
+password   required     pam_deny.so
+
+session    required     pam_warn.so
+session    required     pam_deny.so
diff --git a/meta/recipes-extended/pam/libpam_1.2.1.bb b/meta/recipes-extended/pam/libpam_1.2.1.bb
new file mode 100644
index 0000000..ac3097e
--- /dev/null
+++ b/meta/recipes-extended/pam/libpam_1.2.1.bb
@@ -0,0 +1,169 @@
+SUMMARY = "Linux-PAM (Pluggable Authentication Modules)"
+DESCRIPTION = "Linux-PAM (Pluggable Authentication Modules for Linux), a flexible mechanism for authenticating users"
+HOMEPAGE = "https://fedorahosted.org/linux-pam/"
+BUGTRACKER = "https://fedorahosted.org/linux-pam/newticket"
+SECTION = "base"
+# PAM is dual licensed under GPL and BSD.
+# /etc/pam.d comes from Debian libpam-runtime in 2009-11 (at that time
+# libpam-runtime-1.0.1 is GPLv2+), by openembedded
+LICENSE = "GPLv2+ | BSD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=7eb5c1bf854e8881005d673599ee74d3"
+
+SRC_URI = "http://linux-pam.org/library/Linux-PAM-${PV}.tar.bz2 \
+           file://99_pam \
+           file://pam.d/common-account \
+           file://pam.d/common-auth \
+           file://pam.d/common-password \
+           file://pam.d/common-session \
+           file://pam.d/common-session-noninteractive \
+           file://pam.d/other \
+           file://libpam-xtests.patch \
+           file://fixsepbuild.patch \
+           file://pam-security-abstract-securetty-handling.patch \
+           file://pam-unix-nullok-secure.patch \
+           file://libpam-xtests-remove-bash-dependency.patch \
+           file://crypt_configure.patch \
+          "
+
+SRC_URI[md5sum] = "9dc53067556d2dd567808fd509519dd6"
+SRC_URI[sha256sum] = "342b1211c0d3b203a7df2540a5b03a428a087bd8a48c17e49ae268f992b334d9"
+
+SRC_URI_append_libc-uclibc = " file://pam-no-innetgr.patch"
+SRC_URI_append_libc-musl = " file://pam-no-innetgr.patch"
+
+DEPENDS = "bison flex flex-native cracklib"
+
+EXTRA_OECONF = "--with-db-uniquename=_pam \
+                --includedir=${includedir}/security \
+                --libdir=${base_libdir} \
+                --disable-nis \
+                --disable-regenerate-docu \
+		--disable-prelude"
+
+CFLAGS_append = " -fPIC "
+
+PR = "r5"
+
+S = "${WORKDIR}/Linux-PAM-${PV}"
+
+inherit autotools gettext pkgconfig
+
+PACKAGECONFIG[audit] = "--enable-audit,--disable-audit,audit,"
+
+PACKAGES += "${PN}-runtime ${PN}-xtests"
+FILES_${PN} = "${base_libdir}/lib*${SOLIBS}"
+FILES_${PN}-dbg += "${base_libdir}/security/.debug \
+                    ${base_libdir}/security/pam_filter/.debug \
+                    ${datadir}/Linux-PAM/xtests/.debug"
+
+FILES_${PN}-dev += "${base_libdir}/security/*.la ${base_libdir}/*.la ${base_libdir}/lib*${SOLIBSDEV}"
+FILES_${PN}-runtime = "${sysconfdir}"
+FILES_${PN}-xtests = "${datadir}/Linux-PAM/xtests"
+
+PACKAGES_DYNAMIC += "^${MLPREFIX}pam-plugin-.*"
+
+def get_multilib_bit(d):
+    baselib = d.getVar('baselib', True) or ''
+    return baselib.replace('lib', '')
+
+libpam_suffix = "suffix${@get_multilib_bit(d)}"
+
+RPROVIDES_${PN} += "${PN}-${libpam_suffix}"
+RPROVIDES_${PN}-runtime += "${PN}-runtime-${libpam_suffix}"
+
+RDEPENDS_${PN}-runtime = "${PN}-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-deny-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-permit-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-warn-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-unix-${libpam_suffix} \
+    "
+RDEPENDS_${PN}-xtests = "${PN}-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-access-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-debug-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-cracklib-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-pwhistory-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-succeed-if-${libpam_suffix} \
+    ${MLPREFIX}pam-plugin-time-${libpam_suffix} \
+    coreutils"
+
+# FIXME: Native suffix breaks here, disable it for now
+RRECOMMENDS_${PN} = "${PN}-runtime-${libpam_suffix}"
+RRECOMMENDS_${PN}_class-native = ""
+
+python populate_packages_prepend () {
+    def pam_plugin_append_file(pn, dir, file):
+        nf = os.path.join(dir, file)
+        of = d.getVar('FILES_' + pn, True)
+        if of:
+            nf = of + " " + nf
+        d.setVar('FILES_' + pn, nf)
+
+    def pam_plugin_hook(file, pkg, pattern, format, basename):
+        pn = d.getVar('PN', True)
+        libpam_suffix = d.getVar('libpam_suffix', True)
+
+        rdeps = d.getVar('RDEPENDS_' + pkg, True)
+        if rdeps:
+            rdeps = rdeps + " " + pn + "-" + libpam_suffix
+        else:
+            rdeps = pn + "-" + libpam_suffix
+        d.setVar('RDEPENDS_' + pkg, rdeps)
+
+        provides = d.getVar('RPROVIDES_' + pkg, True)
+        if provides:
+            provides = provides + " " + pkg + "-" + libpam_suffix
+        else:
+            provides = pkg + "-" + libpam_suffix
+        d.setVar('RPROVIDES_' + pkg, provides)
+
+    mlprefix = d.getVar('MLPREFIX', True) or ''
+    dvar = bb.data.expand('${WORKDIR}/package', d, True)
+    pam_libdir = d.expand('${base_libdir}/security')
+    pam_sbindir = d.expand('${sbindir}')
+    pam_filterdir = d.expand('${base_libdir}/security/pam_filter')
+    pam_pkgname = mlprefix + 'pam-plugin%s'
+
+    do_split_packages(d, pam_libdir, '^pam(.*)\.so$', pam_pkgname,
+                      'PAM plugin for %s', hook=pam_plugin_hook, extra_depends='')
+    pam_plugin_append_file('%spam-plugin-unix' % mlprefix, pam_sbindir, 'unix_chkpwd')
+    pam_plugin_append_file('%spam-plugin-unix' % mlprefix, pam_sbindir, 'unix_update')
+    pam_plugin_append_file('%spam-plugin-tally' % mlprefix, pam_sbindir, 'pam_tally')
+    pam_plugin_append_file('%spam-plugin-tally2' % mlprefix, pam_sbindir, 'pam_tally2')
+    pam_plugin_append_file('%spam-plugin-timestamp' % mlprefix, pam_sbindir, 'pam_timestamp_check')
+    pam_plugin_append_file('%spam-plugin-mkhomedir' % mlprefix, pam_sbindir, 'mkhomedir_helper')
+    pam_plugin_append_file('%spam-plugin-console' % mlprefix, pam_sbindir, 'pam_console_apply')
+    do_split_packages(d, pam_filterdir, '^(.*)$', 'pam-filter-%s', 'PAM filter for %s', extra_depends='')
+}
+
+do_install() {
+	autotools_do_install
+
+	# don't install /var/run when populating rootfs. Do it through volatile
+	rm -rf ${D}${localstatedir}
+	install -d ${D}${sysconfdir}/default/volatiles
+	install -m 0644 ${WORKDIR}/99_pam ${D}${sysconfdir}/default/volatiles
+
+	install -d ${D}${sysconfdir}/pam.d/
+	install -m 0644 ${WORKDIR}/pam.d/* ${D}${sysconfdir}/pam.d/
+
+	# The lsb requires unix_chkpwd has setuid permission
+	chmod 4755 ${D}${sbindir}/unix_chkpwd
+
+	if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+		echo "session optional pam_systemd.so" >> ${D}${sysconfdir}/pam.d/common-session
+	fi
+}
+
+python do_pam_sanity () {
+    if not bb.utils.contains('DISTRO_FEATURES', 'pam', True, False, d):
+        bb.warn("Building libpam but 'pam' isn't in DISTRO_FEATURES, PAM won't work correctly")
+}
+addtask pam_sanity before do_configure
+
+BBCLASSEXTEND = "nativesdk native"
+
+CONFFILES_${PN}-runtime += "${sysconfdir}/pam.d/common-session"
+CONFFILES_${PN}-runtime += "${sysconfdir}/pam.d/common-auth"
+CONFFILES_${PN}-runtime += "${sysconfdir}/pam.d/common-password"
+CONFFILES_${PN}-runtime += "${sysconfdir}/pam.d/common-session-noninteractive"
+CONFFILES_${PN}-runtime += "${sysconfdir}/pam.d/common-account"