poky: subtree update:796be0593a..10c69538c0
Alan Perry (1):
binutils: add libopcodes package for perf
Alex Stewart (1):
opkg: upgrade to version 0.4.4
Alexander Kanavin (73):
selftest/reproducible: enable world reproducibility test
selftest/reproducible: add an exclusion list for items that are not yet reproducible
kea: upgrade 1.7.10 -> 1.8.1
valgrind: exclude bar_bad/bar_bad_xml from ptests
bzip2: run ptests without valgrind
lttng-tools: disable more failing ptests
glib-2.0: add a patch to increase a test timeout
acpica: upgrade 20201113 -> 20201217
bind: upgrade 9.16.9 -> 9.16.10
diffoscope: upgrade 161 -> 163
dnf: upgrade 4.4.0 -> 4.5.2
enchant2: upgrade 2.2.13 -> 2.2.14
epiphany: upgrade 3.38.1 -> 3.38.2
ethtool: upgrade 5.9 -> 5.10
gtk+3: upgrade 3.24.23 -> 3.24.24
init-system-helpers: upgrade 1.58 -> 1.60
kbd: upgrade 2.3.0 -> 2.4.0
kea: upgrade 1.8.1 -> 1.8.2
libmodulemd: upgrade 2.9.4 -> 2.11.1
libpcre2: upgrade 10.35 -> 10.36
libtirpc: upgrade 1.2.6 -> 1.3.1
libusb1: upgrade 1.0.23 -> 1.0.24
libva: upgrade 2.9.0 -> 2.10.0
libx11: upgrade 1.6.12 -> 1.7.0
lighttpd: upgrade 1.4.56 -> 1.4.57
ninja: upgrade 1.10.1 -> 1.10.2
puzzles: upgrade to latest revision
python3-hypothesis: upgrade 5.41.5 -> 5.43.3
python3-py: upgrade 1.9.0 -> 1.10.0
python3-setuptools-scm: upgrade 4.1.2 -> 5.0.1
sqlite3: upgrade 3.33.0 -> 3.34.0
stress-ng: upgrade 0.11.24 -> 0.12.00
sudo: upgrade 1.9.3p1 -> 1.9.4p1
sysvinit: upgrade 2.97 -> 2.98
vala: upgrade 0.50.1 -> 0.50.2
vulkan-headers: upgrade 1.2.154.0 -> 1.2.162.0
webkitgtk: upgrade 2.30.2 -> 2.30.4
xprop: upgrade 1.2.4 -> 1.2.5
xserver-xorg: upgrade 1.20.9 -> 1.20.10
glib-2.0: update 2.66.2 -> 2.66.4
rpm: update 4.16.0 -> 4.16.1.2
piglit: update to latest revision
sbc: update 1.4 -> 1.5
libdnf: update 0.55.0 -> 0.55.2
libva-utils: update 2.9.1 -> 2.10.0
python3-importlib-metadata: update 3.1.1 -> 3.3.0
python3: update 3.9.0 -> 3.9.1
vulkan-loader: upgrade 1.2.154.1 -> 1.2.162.0
vulkan-tools: upgrade 1.2.154.0 -> 1.2.162.0
systemd-bootchart: update 233 -> 234
zstd: add recipe from meta-oe
zstd: update 1.4.5 -> 1.4.8
devtool: gitsm:// should be handled same as git:// in upgrades
ovmf: upgrade 202008 -> 202011
libksba: update 1.4.0 -> 1.5.0
libjitterentropy: update 2.2.0 -> 3.0.0
icu: update 68.1 -> 68.2
gnutls: update 3.6.15 -> 3.7.0
gnupg: update 2.2.23 -> 2.2.26
boost: update 1.74.0 -> 1.75.0
kexec-tools: update 2.0.20 -> 2.0.21
vulkan-samples: update to latest revision
libpam: update 1.3.1 -> 1.5.1
strace: update 5.9 -> 5.10
python3-pytest: update 6.1.2 -> 6.2.1
mtools: update 4.0.25 -> 4.0.26
gnu-config: update to latest revision
cmake: update 3.18.4 -> 3.19.2
ccache: upgrade 3.7.11 -> 4.1
ccache.bbclass: use ccache from host distribution
gawk: add missing ptest dependency
util-linux: upgrade 2.36 -> 2.36.1
ell: upgrade 0.33 -> 0.35
Anatol Belski (1):
iproute2: Make it easier to manipulate SUBDIRS list from bbappend
Anuj Mittal (2):
mesa: add more details to elf-tls patch
mesa: remove patch disabling asm
Bruce Ashfield (23):
linux-yocto-rt/5.4: update to -rt44
linux-yocto/5.4: update to v5.4.80
lttng-modules: fix build against v5.10+
kern-tools: non-gcc config support and option re-classification
linux-yocto/cfg: qemuppc: set CONFIG_SCSI to '=y'
linux-yocto/5.4: update to v5.4.82
linux-yocto/cfg: qemuarm64-gfx.cfg: add CONFIG_INPUT_UINPUT
linux-yocto/5.4: update to v5.4.83
linux-yocto/5.8/cfg: fix -tiny warnings
linux-yocto/5.4/cfg: fix -tiny warnings
systemtap: fix on target build for 4.4 and 5.10+
linux-yocto/5.4/cfg: fix FIRMWARE_LOADER warnings
kernel-devsrc: fix 32bit ARM devsrc builds
linux-yocto/5.4: update to v5.4.85
linux-yocto-dev: bump to v5.11-rc
libc-headers: update to v5.10
machine/qemuarm*: add vmalloc kernel parameter
linux-yocto: introduce v5.10 reference kernel recipes
linux-yocto/5.10: update to v5.10.2
conf/machine: bump qemu preferred versions to 5.10
poky/poky-tiny: set preferred kernel to 5.10
yocto-bsp: explicitly set preferred version for reference boards
poky-alt: don't use conditional assignment for preferred kernel version
Changqing Li (2):
libexif: fix CVE-2020-0198; CVE-2020-0452
libpam: support usrmerge
Chris Laplante (1):
contrib/git-hooks: add a sendemail-validate example hook that adds FROM: lines to outgoing patch emails
Christopher Larson (2):
grub-efi-cfg: exclude OVERRIDES from build_efi_cfg vardeps
uboot-extlinux-config: exclude OVERRIDES from do_create_extlinux_config vardeps
Deepak Rawat (1):
openssl: add support for mingw64 as target
Diego Sueiro (2):
wic: Introduce empty plugin to create unformatted empty partitions
modutils-initscripts: Use depmod -a when modules.dep is empty
Dmitry Baryshkov (3):
perl: fix installation failure because of shell issue
linux-firmware: upgrade 20201118 -> 20201218
linux-firmware: package firmware for Lontium lt9611uxc bridge
Easwar Hariharan (1):
classes/kernel-fitimage: make fitimage_emit_section_config more readable
Elvis Stansvik (1):
ref-manual: terms: Fix poky tarball root folder
Jack Mitchell (1):
distutils3: allow setup.py to be run from a different directory to ${S}
Joey Degges (4):
bitbake: tests/fetch: Organize usehead tests by net requirements
bitbake: tests/fetch: Document behavior of test_gitfetch_usehead
bitbake: tests/fetch: Test usehead with a non-default name
bitbake: fetch/git: Fix usehead for non-default names
Jose Quaresma (11):
gstreamer1.0: upgrade 1.18.1 -> 1.18.2
gstreamer1.0-plugins-bad: v4l2codecs fix typo
gstreamer1.0-plugins-bad: add support for aom plugin
gstreamer1.0-plugins-bad: add support for x265 plugin
gstreamer1.0-plugins-bad: sctp plugin uses the internal usrsctp static lib
gstreamer1.0-plugins-bad: remove unsupported plugins comment
gstreamer1.0-plugins-bad: netsim plugin don't have external deps
gstreamer1.0-plugins-bad: transcode plugin external deps is always present
gstreamer1.0: use the correct meson option for the capabilities
shaderc: upgrade 2020.3 -> 2020.4
spirv-tools: upgrade 2020.5 -> 2020.6
Khairul Rohaizzat Jamaluddin (3):
openssl: Update 1.1.1h -> 1.1.1i
go: Update 1.15.5 -> 1.15.6
curl: Update 7.73.0 -> 7.74.0
Khem Raj (21):
musl: Update to latest master
systemd: Fix reallocarray check
go.bbclass: Use external linker for native packages
qemuriscv: check serial consoles w.r.t. /proc/consoles
busybox-inittab: Implement SYSVINIT_ENABLED_GETTYS and USE_VT
initscripts: use quotes for shell variable comparision
busybox: Install /etc/default/rcS when used as init system
busybox: Run mdev as daemon
rcS: Define identifier for init system used
initscripts: Use initctl on sysvinit only
busybox: Sync rcS.default with sysvinit
ltp: Fix ltp-pan crash on 32bit arches using 64bit time_t
pulseaudio: Fix build with clang for non-x86 target
util-linux: Build fixes for 32bit arches with 64bit time_t
libpam: Drop musl patches
ccache: Build fixes for clang and riscv32
shadow: Remove lastlog pam plugin on musl system
rxvt-unicode: Disable lastlog on musl systems
openssh: Disable lastlog on musl
dropbear: Disable lastlog and wtmp on musl
ccache: Fix build on aarch64/clang
Lee Chee Yang (2):
gdk-pixbuf: fix CVE-2020-29385
wic/direct/kparser: ensure fsuuid for vfat and msdos align with format
Li Wang (2):
qemu: CVE-2020-25723
qemu: CVE-2020-28916
Luca Boccassi (6):
classes/kernel-fitimage: add ability to sign individual images
systemd: update 246 -> 247
systemd: add package config for systemd-oomd
systemd: ship new systemd-dissect in -extra-utils
systemd: set -Dmode=release as recommended by NEWS
systemd: add RRECOMMENDS for weak dependencies, if enabled
Mark Jonas (1):
parted: Make readline dependency optional
Martin Jansa (2):
license.bbclass: Add COMMON_LICENSE_DIR and LICENSE_PATH dirs to PSEUDO_IGNORE_PATHS
busybox.inc: install rcS, rcK and rcS.default only with busybox in VIRTUAL-RUNTIME_init_manager
Maxime Roussin-Bélanger (1):
meta: add missing descriptions in some support recipes
Michael Halstead (1):
releases: conf: add link to 3.2.1, update to include 3.2.1
Milan Shah (2):
oe-pkgdata-util: Added a test to verify oe-pkgdata-util without parameters
bitbake: utils: add docstrings to functions
Mingli Yu (1):
kbd: fix transaction conflict
Nathan Rossi (7):
gcc: Add patch to resolve i*86 tune configuration overrides
qemu.inc: Add seccomp PACKAGECONFIG option
ncurses: Prevent LDFLAGS being emitted in .pc files
which: add nativesdk to BBCLASSEXTEND
sed: add nativesdk to BBCLASSEXTEND
grep: add nativesdk to BBCLASSEXTEND
coreutils: enable xattrs by default for nativesdk
Ovidiu Panait (3):
timezone: upgrade to 2020e
timezone: upgrade to 2020f
variables: Add documentation for KERNEL_DTC_FLAGS
Paul Barker (8):
bitbake.conf: Prevent pyc file generation in pseudo context
documentation: Simplify oe_wiki and oe_home links
documentation: Simplify layerindex and layer links
documentation: Simplify remaining yocto_home links
profile-manual: Simplify yocto_bugs link
ref-manual: Simplify oe_lists link
documentation: Use https links where possible
selftest: Add argument to keep build dir
Paul Eggleton (11):
classes/kernel-fitimage: add variable for description
classes/kernel-fitimage: allow substituting mkimage command
classes/kernel-fitimage: add ability to add additional signing options
oe-selftest: move FIT image tests to their own module
oe-selftest: fitimage: Test for FIT_DESC
oe-selftest: fitimage: add test for signing FIT images
classes: minor corrections to kernel-fitimage section
variables: clarify KERNEL_ALT_IMAGETYPE reference
variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is optional
variables: Add documentation for new kernel-fitimage vars
ref-manual: use consistent capitalisation of U-Boot
Peter Kjellerstedt (7):
lib/oe/path: Add canonicalize()
bitbake.conf: Canonicalize paths in PSEUDO_IGNORE_PATHS
wic: Pass canonicalized paths in PSEUDO_IGNORE_PATHS
glibc: Make adjtime() for 32 bit support being called with delta == NULL
bitbake: cache: Make CoreRecipeInfo include rprovides_pkg for skipped recipes
bitbake: cooker: Include all packages a recipe provides in SkippedPackage.rprovides
apr-util: Only specify --with-dbm=gdbm if gdbm support is enabled
Richard Purdie (22):
pseudo: Drop patches merged into upstream branch
bitbake: data_smart: Ensure hash reflects vardepvalue flags correctly
linuxloader: Avoid confusing string concat errors
systemd: Ensure uid/gid ranges are set deterministically
grub: Fix build reproducibility issue
u-boot-tools: Fix reproducibility issue
grub: Add second fix for determinism issue
oeqa/commands: Ensure sync can be found regardless of PATH
cups: Mark CVE-2009-0032 as a non-issue
cups: Mark CVE-2008-1033 as a non-issue
groff: Fix reproducibility issue
man-db: Avoid reproducibility failures after fixing groff-native
meta-selftest/staticids: Add ids for other recipes
selftest/reproducible: Add useradd-staticids to reproducible builds tests
grub: Further reproducibility fix
man-db: Fix reproducibility issue
bitbake.conf: Add mkfifo to HOSTTOOLS
bitbake.conf: Add /run/ to PSEUDO_IGNORE_PATHS
ppp: Update 2.4.8 -> 2.4.9
ppp: Fix reproducibility issue
sanity: Bump min python version to 3.6
pseudo: Add lchmod wrapper
Robert Yang (6):
buildtools-tarball.bb: Fix PATH for environment setup script
ncurses: Make ncurses-tools depend on ncurses-terminfo-base
minicom: RDEPENDS on ncurses-terminfo-base
archiver.bbclass: Fix --runall=deploy_archives for images
ccache: Extend to nativesdk
ccache.bbclass: Set CCACHE_TEMPDIR
Ross Burton (13):
wic-image-minimal: only depend on syslinux on x86 targets
syslinux: rewrite recipe so only target code is x86-specific
wic-tools: don't build syslinux-native for targets without syslinux
image-uefi.conf: add EFI arch variable
systemd-boot: build the EFI stub
systemd-boot: allow building for Arm targets
wic-tools: add grub-efi and systemd-boot on arm64
lib/oe/qa: handle the 'no specific instruction set' ELF e_machine value
local.conf: add aarch64 to the SDKMACHINE example values
kernel: set COMPATIBLE_HOST to *-linux
bitbake.conf: default SDKMACHINE to the build host architecture
diffstat: point the license checksum at the license
ruby: remove tcl DEPENDS
Scott Murray (2):
grub: fix "CVE:" line in one of the patches
patch: fix CVE-2019-20633
Sinan Kaya (1):
gcsections: add more suppressions for SDK builds
Steve Sakoman (1):
oeqa/selftest/cases/devtool.py: fix typo in ignore_patterns call
Tanu Kaskinen (6):
maintainers.inc: remove myself from maintainers
pulseaudio: Remove OE_LT_RPATH_ALLOW
pulseaudio: disable EsounD support
pulseaudio: disable GConf support
pulseaudio: switch build system from Autotools to Meson
pulseaudio: fix client.conf location
Teoh Jay Shen (2):
oeqa/terminal : improve the test case
oeqa/suspend : add test for suspend state
Tim Orling (6):
python3-hypothesis: upgrade 5.41.4 -> 5.41.5
python3-importlib-metadata: upgrade 3.1.0 -> 3.1.1
python3-pygments: upgrade v2.7.2 -> v2.7.3
python3-setuptools: upgrade 50.3.2 -> 51.0.0
python3-setuptools-scm: add python3-toml dep
python3-packaging: upgrade 20.4 -> 20.8
Tomasz Dziendzielski (1):
populate_sdk_base: Fix condition syntax if SDK_RELOCATE_AFTER_INSTALL is disabled
Trevor Woerner (7):
mesa.inc: switch true/enabled false/disabled
mesa: update 20.2.4 -> 20.3.1
insane.bbclass: allow fifos
selftest-chown: add test for fifos
PSPLASH_FIFO_DIR: refactor
psplash: fix working on first boot (sysvinit)
psplash (sysvinit): add textual updates
Vivien Didelot (4):
README.hardware: prettify headline
README.hardware: fix the dd command
meta-yocto-bsp: use provided variables
meta-yocto-bsp: use mmcblk0 for root partition
Wang Mingyu (4):
libaio: upgrade 0.3.111 -> 0.3.112
readline: upgrade 8.0 -> 8.1
man-pages: upgrade 5.09 ->5.10
mobile-broadband-provider-info: upgrade 20190618 ->20201225
Yi Zhao (6):
dhcpcd: upgrade 9.3.2 -> 9.3.4
dhcpcd: fix SECCOMP for i386
inetutils: add dnsdomainname to ALTERNATIVE
libcap: update 2.45 -> 2.46
libcap-ng: upgrade 0.8.1 -> 0.8.2
dhcpcd: upgrade 9.3.4 -> 9.4.0
Zhixiong Chi (1):
glibc: CVE-2020-29562 and CVE-2020-29573
zangrc (3):
bash: Rename patch name
systemtap: upgrade 4.3 -> 4.4
msmtp: upgrade 1.8.13 -> 1.8.14
zhengruoqin (2):
cantarell-fonts: upgrade 0.201 -> 0.301
gdbm: upgrade 1.18.1 -> 1.19
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I9000a711651a4e884e8bfccc438c95fce184b35e
diff --git a/poky/meta/recipes-devtools/python/python3_3.9.1.bb b/poky/meta/recipes-devtools/python/python3_3.9.1.bb
new file mode 100644
index 0000000..17d0c03
--- /dev/null
+++ b/poky/meta/recipes-devtools/python/python3_3.9.1.bb
@@ -0,0 +1,374 @@
+SUMMARY = "The Python Programming Language"
+HOMEPAGE = "http://www.python.org"
+LICENSE = "PSFv2"
+SECTION = "devel/python"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=33223c9ef60c31e3f0e866cb09b65e83"
+
+SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
+ file://run-ptest \
+ file://create_manifest3.py \
+ file://get_module_deps3.py \
+ file://python3-manifest.json \
+ file://check_build_completeness.py \
+ file://reformat_sysconfig.py \
+ file://cgi_py.patch \
+ file://0001-Do-not-add-usr-lib-termcap-to-linker-flags-to-avoid-.patch \
+ ${@bb.utils.contains('PACKAGECONFIG', 'tk', '', 'file://avoid_warning_about_tkinter.patch', d)} \
+ file://0001-Do-not-use-the-shell-version-of-python-config-that-w.patch \
+ file://python-config.patch \
+ file://0001-Makefile.pre-use-qemu-wrapper-when-gathering-profile.patch \
+ file://0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch \
+ file://0001-Makefile-fix-Issue36464-parallel-build-race-problem.patch \
+ file://0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch \
+ file://crosspythonpath.patch \
+ file://0001-Use-FLAG_REF-always-for-interned-strings.patch \
+ file://0001-test_locale.py-correct-the-test-output-format.patch \
+ file://0017-setup.py-do-not-report-missing-dependencies-for-disa.patch \
+ file://0001-setup.py-pass-missing-libraries-to-Extension-for-mul.patch \
+ file://0001-Makefile-do-not-compile-.pyc-in-parallel.patch \
+ file://0020-configure.ac-setup.py-do-not-add-a-curses-include-pa.patch \
+ file://0001-Lib-sysconfig.py-use-libdir-values-from-configuratio.patch \
+ "
+
+SRC_URI_append_class-native = " \
+ file://0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch \
+ file://12-distutils-prefix-is-inside-staging-area.patch \
+ file://0001-Don-t-search-system-for-headers-libraries.patch \
+ "
+SRC_URI[sha256sum] = "991c3f8ac97992f3d308fefeb03a64db462574eadbff34ce8bc5bb583d9903ff"
+
+# exclude pre-releases for both python 2.x and 3.x
+UPSTREAM_CHECK_REGEX = "[Pp]ython-(?P<pver>\d+(\.\d+)+).tar"
+UPSTREAM_CHECK_URI = "https://www.python.org/downloads/source/"
+
+CVE_PRODUCT = "python"
+
+# Upstream consider this expected behaviour
+CVE_CHECK_WHITELIST += "CVE-2007-4559"
+# This is not exploitable when glibc has CVE-2016-10739 fixed.
+CVE_CHECK_WHITELIST += "CVE-2019-18348"
+
+# This is windows only issue.
+CVE_CHECK_WHITELIST += "CVE-2020-15523"
+
+PYTHON_MAJMIN = "3.9"
+
+S = "${WORKDIR}/Python-${PV}"
+
+BBCLASSEXTEND = "native nativesdk"
+
+inherit autotools pkgconfig qemu ptest multilib_header update-alternatives
+
+MULTILIB_SUFFIX = "${@d.getVar('base_libdir',1).split('/')[-1]}"
+
+ALTERNATIVE_${PN}-dev = "python3-config"
+ALTERNATIVE_LINK_NAME[python3-config] = "${bindir}/python${PYTHON_MAJMIN}-config"
+ALTERNATIVE_TARGET[python3-config] = "${bindir}/python${PYTHON_MAJMIN}-config-${MULTILIB_SUFFIX}"
+
+
+DEPENDS = "bzip2-replacement-native libffi bzip2 openssl sqlite3 zlib virtual/libintl xz virtual/crypt util-linux libtirpc libnsl2"
+DEPENDS_append_class-target = " python3-native"
+DEPENDS_append_class-nativesdk = " python3-native"
+
+EXTRA_OECONF = " --without-ensurepip --enable-shared --with-platlibdir=${baselib}"
+EXTRA_OECONF_append_class-native = " --bindir=${bindir}/${PN}"
+
+export CROSSPYTHONPATH="${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/"
+
+EXTRANATIVEPATH += "python3-native"
+
+# LTO will be enabled via packageconfig depending upong distro features
+LTO_class-target = ""
+
+CACHED_CONFIGUREVARS = " \
+ ac_cv_file__dev_ptmx=yes \
+ ac_cv_file__dev_ptc=no \
+ ac_cv_working_tzset=yes \
+"
+
+def possibly_include_pgo(d):
+ # PGO currently causes builds to not be reproducible, so disable it for
+ # now. See YOCTO #13407
+ if bb.utils.contains('MACHINE_FEATURES', 'qemu-usermode', True, False, d) and d.getVar('BUILD_REPRODUCIBLE_BINARIES') != '1':
+ return 'pgo'
+
+ return ''
+
+PACKAGECONFIG_class-target ??= "readline ${@possibly_include_pgo(d)} gdbm ${@bb.utils.filter('DISTRO_FEATURES', 'lto', d)}"
+PACKAGECONFIG_class-native ??= "readline gdbm"
+PACKAGECONFIG_class-nativesdk ??= "readline gdbm"
+PACKAGECONFIG[readline] = ",,readline"
+# Use profile guided optimisation by running PyBench inside qemu-user
+PACKAGECONFIG[pgo] = "--enable-optimizations,,qemu-native"
+PACKAGECONFIG[tk] = ",,tk"
+PACKAGECONFIG[gdbm] = ",,gdbm"
+PACKAGECONFIG[lto] = "--with-lto,,"
+
+do_configure_prepend () {
+ mkdir -p ${B}/Modules
+ cat > ${B}/Modules/Setup.local << EOF
+*disabled*
+${@bb.utils.contains('PACKAGECONFIG', 'gdbm', '', '_gdbm _dbm', d)}
+${@bb.utils.contains('PACKAGECONFIG', 'readline', '', 'readline', d)}
+EOF
+}
+
+CPPFLAGS_append = " -I${STAGING_INCDIR}/ncursesw -I${STAGING_INCDIR}/uuid"
+
+EXTRA_OEMAKE = '\
+ STAGING_LIBDIR=${STAGING_LIBDIR} \
+ STAGING_INCDIR=${STAGING_INCDIR} \
+ LIB=${baselib} \
+'
+
+do_compile_prepend_class-target() {
+ if ${@bb.utils.contains('PACKAGECONFIG', 'pgo', 'true', 'false', d)}; then
+ qemu_binary="${@qemu_wrapper_cmdline(d, '${STAGING_DIR_TARGET}', ['${B}', '${STAGING_DIR_TARGET}/${base_libdir}'])}"
+ cat >pgo-wrapper <<EOF
+#!/bin/sh
+cd ${B}
+$qemu_binary "\$@"
+EOF
+ chmod +x pgo-wrapper
+ fi
+}
+
+do_install_prepend() {
+ ${WORKDIR}/check_build_completeness.py ${T}/log.do_compile
+}
+
+do_install_append_class-target() {
+ oe_multilib_header python${PYTHON_MAJMIN}/pyconfig.h
+}
+
+do_install_append_class-native() {
+ # Make sure we use /usr/bin/env python
+ for PYTHSCRIPT in `grep -rIl ${bindir}/${PN}/python ${D}${bindir}/${PN}`; do
+ sed -i -e '1s|^#!.*|#!/usr/bin/env python3|' $PYTHSCRIPT
+ done
+ # Add a symlink to the native Python so that scripts can just invoke
+ # "nativepython" and get the right one without needing absolute paths
+ # (these often end up too long for the #! parser in the kernel as the
+ # buffer is 128 bytes long).
+ ln -s python3-native/python3 ${D}${bindir}/nativepython3
+}
+
+do_install_append() {
+ mkdir -p ${D}${libdir}/python-sysconfigdata
+ sysconfigfile=`find ${D} -name _sysconfig*.py`
+ cp $sysconfigfile ${D}${libdir}/python-sysconfigdata/_sysconfigdata.py
+
+ sed -i \
+ -e "s,^ 'LIBDIR'.*, 'LIBDIR': '${STAGING_LIBDIR}'\,,g" \
+ -e "s,^ 'INCLUDEDIR'.*, 'INCLUDEDIR': '${STAGING_INCDIR}'\,,g" \
+ -e "s,^ 'CONFINCLUDEDIR'.*, 'CONFINCLUDEDIR': '${STAGING_INCDIR}'\,,g" \
+ -e "/^ 'INCLDIRSTOMAKE'/{N; s,/usr/include,${STAGING_INCDIR},g}" \
+ -e "/^ 'INCLUDEPY'/s,/usr/include,${STAGING_INCDIR},g" \
+ ${D}${libdir}/python-sysconfigdata/_sysconfigdata.py
+
+ # Unfortunately the following pyc files are non-deterministc due to 'frozenset'
+ # being written without strict ordering, even with PYTHONHASHSEED = 0
+ # Upstream is discussing ways to solve the issue properly, until then let's
+ # just not install the problematic files.
+ # More info: http://benno.id.au/blog/2013/01/15/python-determinism
+ rm ${D}${libdir}/python${PYTHON_MAJMIN}/test/__pycache__/test_range.cpython*
+ rm ${D}${libdir}/python${PYTHON_MAJMIN}/test/__pycache__/test_xml_etree.cpython*
+}
+
+do_install_append_class-nativesdk () {
+ create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo' PYTHONNOUSERSITE='1'
+}
+
+SSTATE_SCAN_FILES += "Makefile _sysconfigdata.py"
+PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
+
+py_package_preprocess () {
+ # Remove references to buildmachine paths in target Makefile and _sysconfigdata
+ sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
+ -e 's|${DEBUG_PREFIX_MAP}||g' \
+ -e 's:${HOSTTOOLS_DIR}/::g' \
+ -e 's:${RECIPE_SYSROOT_NATIVE}::g' \
+ -e 's:${RECIPE_SYSROOT}::g' \
+ -e 's:${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}::g' \
+ ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}*/Makefile \
+ ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata*.py \
+ ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config
+
+ # Reformat _sysconfigdata after modifying it so that it remains
+ # reproducible
+ for c in ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata*.py; do
+ python3 ${WORKDIR}/reformat_sysconfig.py $c
+ done
+
+ # Recompile _sysconfigdata after modifying it
+ cd ${PKGD}
+ sysconfigfile=`find . -name _sysconfigdata_*.py`
+ ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+ -c "from py_compile import compile; compile('$sysconfigfile')"
+ ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+ -c "from py_compile import compile; compile('$sysconfigfile', optimize=1)"
+ ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
+ -c "from py_compile import compile; compile('$sysconfigfile', optimize=2)"
+ cd -
+
+ mv ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config-${MULTILIB_SUFFIX}
+
+ #Remove the unneeded copy of target sysconfig data
+ rm -rf ${PKGD}/${libdir}/python-sysconfigdata
+}
+
+# We want bytecode precompiled .py files (.pyc's) by default
+# but the user may set it on their own conf
+INCLUDE_PYCS ?= "1"
+
+python(){
+ import collections, json
+
+ filename = os.path.join(d.getVar('THISDIR'), 'python3', 'python3-manifest.json')
+ # This python changes the datastore based on the contents of a file, so mark
+ # that dependency.
+ bb.parse.mark_dependency(d, filename)
+
+ with open(filename) as manifest_file:
+ manifest_str = manifest_file.read()
+ json_start = manifest_str.find('# EOC') + 6
+ manifest_file.seek(json_start)
+ manifest_str = manifest_file.read()
+ python_manifest = json.loads(manifest_str, object_pairs_hook=collections.OrderedDict)
+
+ # First set RPROVIDES for -native case
+ # Hardcoded since it cant be python3-native-foo, should be python3-foo-native
+ pn = 'python3'
+ rprovides = d.getVar('RPROVIDES').split()
+
+ # ${PN}-misc-native is not in the manifest
+ rprovides.append(pn + '-misc-native')
+
+ for key in python_manifest:
+ pypackage = pn + '-' + key + '-native'
+ if pypackage not in rprovides:
+ rprovides.append(pypackage)
+
+ d.setVar('RPROVIDES_class-native', ' '.join(rprovides))
+
+ # Then work on the target
+ include_pycs = d.getVar('INCLUDE_PYCS')
+
+ packages = d.getVar('PACKAGES').split()
+ pn = d.getVar('PN')
+
+ newpackages=[]
+ for key in python_manifest:
+ pypackage = pn + '-' + key
+
+ if pypackage not in packages:
+ # We need to prepend, otherwise python-misc gets everything
+ # so we use a new variable
+ newpackages.append(pypackage)
+
+ # "Build" python's manifest FILES, RDEPENDS and SUMMARY
+ d.setVar('FILES_' + pypackage, '')
+ for value in python_manifest[key]['files']:
+ d.appendVar('FILES_' + pypackage, ' ' + value)
+
+ # Add cached files
+ if include_pycs == '1':
+ for value in python_manifest[key]['cached']:
+ d.appendVar('FILES_' + pypackage, ' ' + value)
+
+ for value in python_manifest[key]['rdepends']:
+ # Make it work with or without $PN
+ if '${PN}' in value:
+ value=value.split('-', 1)[1]
+ d.appendVar('RDEPENDS_' + pypackage, ' ' + pn + '-' + value)
+
+ for value in python_manifest[key].get('rrecommends', ()):
+ if '${PN}' in value:
+ value=value.split('-', 1)[1]
+ d.appendVar('RRECOMMENDS_' + pypackage, ' ' + pn + '-' + value)
+
+ d.setVar('SUMMARY_' + pypackage, python_manifest[key]['summary'])
+
+ # Prepending so to avoid python-misc getting everything
+ packages = newpackages + packages
+ d.setVar('PACKAGES', ' '.join(packages))
+ d.setVar('ALLOW_EMPTY_${PN}-modules', '1')
+ d.setVar('ALLOW_EMPTY_${PN}-pkgutil', '1')
+}
+
+# Files needed to create a new manifest
+
+do_create_manifest() {
+ # This task should be run with every new release of Python.
+ # We must ensure that PACKAGECONFIG enables everything when creating
+ # a new manifest, this is to base our new manifest on a complete
+ # native python build, containing all dependencies, otherwise the task
+ # wont be able to find the required files.
+ # e.g. BerkeleyDB is an optional build dependency so it may or may not
+ # be present, we must ensure it is.
+
+ cd ${WORKDIR}
+ # This needs to be executed by python-native and NOT by HOST's python
+ nativepython3 create_manifest3.py ${PYTHON_MAJMIN}
+ cp python3-manifest.json.new ${THISDIR}/python3/python3-manifest.json
+}
+
+# bitbake python -c create_manifest
+addtask do_create_manifest
+
+# Make sure we have native python ready when we create a new manifest
+do_create_manifest[depends] += "${PN}:do_prepare_recipe_sysroot"
+do_create_manifest[depends] += "${PN}:do_patch"
+
+# manual dependency additions
+RRECOMMENDS_${PN}-core_append_class-nativesdk = " nativesdk-python3-modules"
+RRECOMMENDS_${PN}-crypt_append_class-target = " ${MLPREFIX}openssl ${MLPREFIX}ca-certificates"
+RRECOMMENDS_${PN}-crypt_append_class-nativesdk = " ${MLPREFIX}openssl ${MLPREFIX}ca-certificates"
+
+# For historical reasons PN is empty and provided by python3-modules
+FILES_${PN} = ""
+RPROVIDES_${PN}-modules = "${PN}"
+
+FILES_${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
+FILES_${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"
+
+# provide python-pyvenv from python3-venv
+RPROVIDES_${PN}-venv += "${MLPREFIX}python3-pyvenv"
+
+# package libpython3
+PACKAGES =+ "libpython3 libpython3-staticdev"
+FILES_libpython3 = "${libdir}/libpython*.so.*"
+FILES_libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}-*/libpython${PYTHON_MAJMIN}.a"
+INSANE_SKIP_${PN}-dev += "dev-elf"
+
+# catch all the rest (unsorted)
+PACKAGES += "${PN}-misc"
+RDEPENDS_${PN}-misc += "\
+ ${PN}-core \
+ ${PN}-email \
+ ${PN}-codecs \
+ ${PN}-pydoc \
+ ${PN}-pickle \
+ ${PN}-audio \
+ ${PN}-numbers \
+"
+RDEPENDS_${PN}-modules_append_class-target = " ${MLPREFIX}python3-misc"
+RDEPENDS_${PN}-modules_append_class-nativesdk = " ${MLPREFIX}python3-misc"
+FILES_${PN}-misc = "${libdir}/python${PYTHON_MAJMIN} ${libdir}/python${PYTHON_MAJMIN}/lib-dynload"
+
+# catch manpage
+PACKAGES += "${PN}-man"
+FILES_${PN}-man = "${datadir}/man"
+
+# See https://bugs.python.org/issue18748 and https://bugs.python.org/issue37395
+RDEPENDS_libpython3_append_libc-glibc = " libgcc"
+RDEPENDS_${PN}-ctypes_append_libc-glibc = " ${MLPREFIX}ldconfig"
+RDEPENDS_${PN}-ptest = "${PN}-modules ${PN}-tests unzip bzip2 libgcc tzdata-europe coreutils sed"
+RDEPENDS_${PN}-ptest_append_libc-glibc = " locale-base-tr-tr.iso-8859-9"
+RDEPENDS_${PN}-tkinter += "${@bb.utils.contains('PACKAGECONFIG', 'tk', 'tk tk-lib', '', d)}"
+RDEPENDS_${PN}-idle += "${@bb.utils.contains('PACKAGECONFIG', 'tk', '${PN}-tkinter tcl', '', d)}"
+RDEPENDS_${PN}-dev = ""
+
+RDEPENDS_${PN}-tests_append_class-target = " ${MLPREFIX}bash"
+RDEPENDS_${PN}-tests_append_class-nativesdk = " ${MLPREFIX}bash"