diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst
index e3fd321..a9c3370 100644
--- a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.rst
@@ -20,7 +20,7 @@
 
 See the :ref:`bitbake-user-manual/bitbake-user-manual-hello:obtaining bitbake` section for
 information on how to obtain BitBake. Once you have the source code on
-your machine, the BitBake directory appears as follows: ::
+your machine, the BitBake directory appears as follows::
 
    $ ls -al
    total 100
@@ -49,7 +49,7 @@
 
 First, you need to be sure that you can run BitBake. Set your working
 directory to where your local BitBake files are and run the following
-command: ::
+command::
 
   $ ./bin/bitbake --version
   BitBake Build Tool Core version 1.23.0, bitbake version 1.23.0
@@ -61,14 +61,14 @@
 choice. To be able to run BitBake from any directory, you need to add
 the executable binary to your binary to your shell's environment
 ``PATH`` variable. First, look at your current ``PATH`` variable by
-entering the following: ::
+entering the following::
 
   $ echo $PATH
 
 Next, add the directory location
 for the BitBake binary to the ``PATH``. Here is an example that adds the
 ``/home/scott-lenovo/bitbake/bin`` directory to the front of the
-``PATH`` variable: ::
+``PATH`` variable::
 
   $ export PATH=/home/scott-lenovo/bitbake/bin:$PATH
 
@@ -116,7 +116,7 @@
 
 #.  **Create a Project Directory:** First, set up a directory for the
     "Hello World" project. Here is how you can do so in your home
-    directory: ::
+    directory::
 
       $ mkdir ~/hello
       $ cd ~/hello
@@ -127,7 +127,7 @@
     directory is a good way to isolate your project.
 
 #.  **Run BitBake:** At this point, you have nothing but a project
-    directory. Run the ``bitbake`` command and see what it does: ::
+    directory. Run the ``bitbake`` command and see what it does::
 
        $ bitbake
        The BBPATH variable is not set and bitbake did not
@@ -161,7 +161,7 @@
     ``BBPATH`` variable up in a configuration file for each project.
 
     From your shell, enter the following commands to set and export the
-    ``BBPATH`` variable: ::
+    ``BBPATH`` variable::
 
       $ BBPATH="projectdirectory"
       $ export BBPATH
@@ -176,7 +176,7 @@
        shell would.
 
 #.  **Run BitBake:** Now that you have ``BBPATH`` defined, run the
-    ``bitbake`` command again: ::
+    ``bitbake`` command again::
 
        $ bitbake
        ERROR: Traceback (most recent call last):
@@ -208,13 +208,13 @@
     http://git.openembedded.org/bitbake/tree/conf/bitbake.conf.
 
     Use the following commands to create the ``conf`` directory in the
-    project directory: ::
+    project directory::
 
       $ mkdir conf
 
     From within the ``conf`` directory,
     use some editor to create the ``bitbake.conf`` so that it contains
-    the following: ::
+    the following::
 
        PN  = "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE', False),d)[0] or 'defaultpkgname'}"
 
@@ -251,7 +251,7 @@
     glossary.
 
 #.  **Run BitBake:** After making sure that the ``conf/bitbake.conf`` file
-    exists, you can run the ``bitbake`` command again: ::
+    exists, you can run the ``bitbake`` command again::
 
        $ bitbake
        ERROR: Traceback (most recent call last):
@@ -278,7 +278,7 @@
     in the ``classes`` directory of the project (i.e ``hello/classes``
     in this example).
 
-    Create the ``classes`` directory as follows: ::
+    Create the ``classes`` directory as follows::
 
       $ cd $HOME/hello
       $ mkdir classes
@@ -291,7 +291,7 @@
     environments BitBake is supporting.
 
 #.  **Run BitBake:** After making sure that the ``classes/base.bbclass``
-    file exists, you can run the ``bitbake`` command again: ::
+    file exists, you can run the ``bitbake`` command again::
 
        $ bitbake
        Nothing to do. Use 'bitbake world' to build everything, or run 'bitbake --help' for usage information.
@@ -314,7 +314,7 @@
     Minimally, you need a recipe file and a layer configuration file in
     your layer. The configuration file needs to be in the ``conf``
     directory inside the layer. Use these commands to set up the layer
-    and the ``conf`` directory: ::
+    and the ``conf`` directory::
 
        $ cd $HOME
        $ mkdir mylayer
@@ -322,12 +322,12 @@
        $ mkdir conf
 
     Move to the ``conf`` directory and create a ``layer.conf`` file that has the
-    following: ::
+    following::
 
       BBPATH .= ":${LAYERDIR}"
-      BBFILES += "${LAYERDIR}/\*.bb"
+      BBFILES += "${LAYERDIR}/*.bb"
       BBFILE_COLLECTIONS += "mylayer"
-     `BBFILE_PATTERN_mylayer := "^${LAYERDIR_RE}/"
+      BBFILE_PATTERN_mylayer := "^${LAYERDIR_RE}/"
 
     For information on these variables, click on :term:`BBFILES`,
     :term:`LAYERDIR`, :term:`BBFILE_COLLECTIONS` or :term:`BBFILE_PATTERN_mylayer <BBFILE_PATTERN>`
@@ -335,7 +335,7 @@
 
     You need to create the recipe file next. Inside your layer at the
     top-level, use an editor and create a recipe file named
-    ``printhello.bb`` that has the following: ::
+    ``printhello.bb`` that has the following::
 
        DESCRIPTION = "Prints Hello World"
        PN = 'printhello'
@@ -356,7 +356,7 @@
     follow the links to the glossary.
 
 #. **Run BitBake With a Target:** Now that a BitBake target exists, run
-    the command and provide that target: ::
+    the command and provide that target::
 
       $ cd $HOME/hello
       $ bitbake printhello
@@ -376,7 +376,7 @@
     ``hello/conf`` for this example).
 
     Set your working directory to the ``hello/conf`` directory and then
-    create the ``bblayers.conf`` file so that it contains the following: ::
+    create the ``bblayers.conf`` file so that it contains the following::
 
        BBLAYERS ?= " \
            /home/<you>/mylayer \
@@ -386,7 +386,7 @@
 
 #. **Run BitBake With a Target:** Now that you have supplied the
     ``bblayers.conf`` file, run the ``bitbake`` command and provide the
-    target: ::
+    target::
 
        $ bitbake printhello
        Parsing recipes: 100% |##################################################################################|