diff --git a/poky/documentation/kernel-dev/common.rst b/poky/documentation/kernel-dev/common.rst
index 56217b9..3f35d84 100644
--- a/poky/documentation/kernel-dev/common.rst
+++ b/poky/documentation/kernel-dev/common.rst
@@ -54,8 +54,7 @@
 
 1. *Initialize the BitBake Environment:* Before building an extensible
    SDK, you need to initialize the BitBake build environment by sourcing
-   the build environment script (i.e. :ref:`structure-core-script`):
-   ::
+   the build environment script (i.e. :ref:`structure-core-script`)::
 
       $ cd poky
       $ source oe-init-build-env
@@ -83,16 +82,14 @@
 
    In this example we wish to build for qemux86 so we must set the
    ``MACHINE`` variable to "qemux86" and also add the "kernel-modules".
-   As described we do this by appending to ``conf/local.conf``:
-   ::
+   As described we do this by appending to ``conf/local.conf``::
 
       MACHINE = "qemux86"
       MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-modules"
 
 3. *Create a Layer for Patches:* You need to create a layer to hold
    patches created for the kernel image. You can use the
-   ``bitbake-layers create-layer`` command as follows:
-   ::
+   ``bitbake-layers create-layer`` command as follows::
 
       $ cd poky/build
       $ bitbake-layers create-layer ../../meta-mylayer
@@ -116,8 +113,7 @@
 4. *Inform the BitBake Build Environment About Your Layer:* As directed
    when you created your layer, you need to add the layer to the
    :term:`BBLAYERS` variable in the
-   ``bblayers.conf`` file as follows:
-   ::
+   ``bblayers.conf`` file as follows::
 
       $ cd poky/build
       $ bitbake-layers add-layer ../../meta-mylayer
@@ -125,16 +121,14 @@
       $
 
 5. *Build the Extensible SDK:* Use BitBake to build the extensible SDK
-   specifically for use with images to be run using QEMU:
-   ::
+   specifically for use with images to be run using QEMU::
 
       $ cd poky/build
       $ bitbake core-image-minimal -c populate_sdk_ext
 
    Once
    the build finishes, you can find the SDK installer file (i.e.
-   ``*.sh`` file) in the following directory:
-   ::
+   ``*.sh`` file) in the following directory::
 
       poky/build/tmp/deploy/sdk
 
@@ -143,8 +137,7 @@
 
 6. *Install the Extensible SDK:* Use the following command to install
    the SDK. For this example, install the SDK in the default
-   ``poky_sdk`` directory:
-   ::
+   ``poky_sdk`` directory::
 
       $ cd poky/build/tmp/deploy/sdk
       $ ./poky-glibc-x86_64-core-image-minimal-i586-toolchain-ext-&DISTRO;.sh
@@ -172,8 +165,7 @@
    BitBake shell used to build the installer.
 
    After opening a new shell, run the SDK environment setup script as
-   directed by the output from installing the SDK:
-   ::
+   directed by the output from installing the SDK::
 
       $ source poky_sdk/environment-setup-i586-poky-linux
       "SDK environment now set up; additionally you may now run devtool to perform development tasks.
@@ -186,8 +178,7 @@
 
 8. *Build the Clean Image:* The final step in preparing to work on the
    kernel is to build an initial image using ``devtool`` in the new
-   terminal you just set up and initialized for SDK work:
-   ::
+   terminal you just set up and initialized for SDK work::
 
       $ devtool build-image
       Parsing recipes: 100% |##########################################| Time: 0:00:05
@@ -269,16 +260,14 @@
 
    In this example we wish to build for qemux86 so we must set the
    ``MACHINE`` variable to "qemux86" and also add the "kernel-modules".
-   As described we do this by appending to ``conf/local.conf``:
-   ::
+   As described we do this by appending to ``conf/local.conf``::
 
       MACHINE = "qemux86"
       MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-modules"
 
 3. *Create a Layer for Patches:* You need to create a layer to hold
    patches created for the kernel image. You can use the
-   ``bitbake-layers create-layer`` command as follows:
-   ::
+   ``bitbake-layers create-layer`` command as follows::
 
       $ cd poky/build
       $ bitbake-layers create-layer ../../meta-mylayer
@@ -301,8 +290,7 @@
 4. *Inform the BitBake Build Environment About Your Layer:* As directed
    when you created your layer, you need to add the layer to the
    :term:`BBLAYERS` variable in the
-   ``bblayers.conf`` file as follows:
-   ::
+   ``bblayers.conf`` file as follows::
 
       $ cd poky/build
       $ bitbake-layers add-layer ../../meta-mylayer
@@ -350,8 +338,7 @@
    the ``yocto-4.12`` branch.
 
    The following commands show how to create a local copy of the
-   ``yocto-kernel-cache`` and be in the ``yocto-4.12`` branch:
-   ::
+   ``yocto-kernel-cache`` and be in the ``yocto-4.12`` branch::
 
       $ cd ~
       $ git clone git://git.yoctoproject.org/yocto-kernel-cache --branch yocto-4.12
@@ -394,8 +381,7 @@
 tools. These steps assume creation of a layer named ``mylayer`` in your
 home directory:
 
-1. *Create Structure*: Create the layer's structure:
-   ::
+1. *Create Structure*: Create the layer's structure::
 
       $ mkdir meta-mylayer
       $ mkdir meta-mylayer/conf
@@ -409,8 +395,7 @@
 
 2. *Create the Layer Configuration File*: Move to the
    ``meta-mylayer/conf`` directory and create the ``layer.conf`` file as
-   follows:
-   ::
+   follows::
 
       # We have a conf and classes directory, add to BBPATH
       BBPATH .= ":${LAYERDIR}"
@@ -429,8 +414,7 @@
    ``meta-mylayer/recipes-kernel/linux`` directory and create the
    kernel's append file. This example uses the ``linux-yocto-4.12``
    kernel. Thus, the name of the append file is
-   ``linux-yocto_4.12.bbappend``:
-   ::
+   ``linux-yocto_4.12.bbappend``::
 
       FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
@@ -483,8 +467,7 @@
 :term:`FILESPATH` search path by
 prepending the directory that contains your files to the
 :term:`FILESEXTRAPATHS`
-variable as follows:
-::
+variable as follows::
 
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
@@ -492,8 +475,7 @@
 expands to "linux-yocto" in the current directory for this example. If
 you add any new files that modify the kernel recipe and you have
 extended ``FILESPATH`` as described above, you must place the files in
-your layer in the following area:
-::
+your layer in the following area::
 
    your-layer/recipes-kernel/linux/linux-yocto/
 
@@ -582,8 +564,7 @@
 similar procedure. Here is an example that groups separate
 configurations specifically for Ethernet and graphics into their own
 files and adds the configurations by using a ``SRC_URI`` statement like
-the following in your append file:
-::
+the following in your append file::
 
    SRC_URI += "file://myconfig.cfg \
                file://eth.cfg \
@@ -627,8 +608,7 @@
 statements.
 
 For example, you can apply a three-patch series by adding the following
-lines to your linux-yocto ``.bbappend`` file in your layer:
-::
+lines to your linux-yocto ``.bbappend`` file in your layer::
 
    SRC_URI += "file://0001-first-change.patch"
    SRC_URI += "file://0002-second-change.patch"
@@ -658,8 +638,7 @@
 to use for the configuration, as before, copy that file to the
 appropriate ``${PN}`` directory in your layer's ``recipes-kernel/linux``
 directory, and rename the copied file to "defconfig". Then, add the
-following lines to the linux-yocto ``.bbappend`` file in your layer:
-::
+following lines to the linux-yocto ``.bbappend`` file in your layer::
 
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
    SRC_URI += "file://defconfig"
@@ -685,8 +664,7 @@
 incremental change you want to make and add that as a configuration
 fragment. For example, if you want to add support for a basic serial
 console, create a file named ``8250.cfg`` in the ``${PN}`` directory
-with the following content (without indentation):
-::
+with the following content (without indentation)::
 
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
@@ -698,8 +676,7 @@
 
 Next, include this
 configuration fragment and extend the ``FILESPATH`` variable in your
-``.bbappend`` file:
-::
+``.bbappend`` file::
 
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
    SRC_URI += "file://8250.cfg"
@@ -718,8 +695,7 @@
 through a ``defconfig`` file that is pulled from the kernel source tree
 for the configured machine. By default, the OpenEmbedded build system
 looks for ``defconfig`` files in the layer used for Metadata, which is
-"out-of-tree", and then configures them using the following:
-::
+"out-of-tree", and then configures them using the following::
 
    SRC_URI += "file://defconfig"
 
@@ -732,16 +708,14 @@
 ``defconfig`` file that is "in-tree".
 
 To specify an "in-tree" ``defconfig`` file, use the following statement
-form:
-::
+form::
 
    KBUILD_DEFCONFIG_KMACHINE ?= "defconfig_file"
 
 Here is an example
 that assigns the ``KBUILD_DEFCONFIG`` variable based on "raspberrypi2"
 and provides the path to the "in-tree" ``defconfig`` file to be used for
-a Raspberry Pi 2, which is based on the Broadcom 2708/2709 chipset:
-::
+a Raspberry Pi 2, which is based on the Broadcom 2708/2709 chipset::
 
    KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
 
@@ -792,8 +766,7 @@
       ":ref:`kernel-dev/common:getting ready to develop using \`\`devtool\`\``"
       section for more information.
 
-   Use the following ``devtool`` command to check out the code:
-   ::
+   Use the following ``devtool`` command to check out the code::
 
       $ devtool modify linux-yocto
 
@@ -819,14 +792,12 @@
       noted where you can find the source files (e.g.
       ``poky_sdk/workspace/sources/linux-yocto``). Change to where the
       kernel source code is before making your edits to the
-      ``calibrate.c`` file:
-      ::
+      ``calibrate.c`` file::
 
          $ cd poky_sdk/workspace/sources/linux-yocto
 
    2. *Edit the source file*: Edit the ``init/calibrate.c`` file to have
-      the following changes:
-      ::
+      the following changes::
 
          void calibrate_delay(void)
          {
@@ -846,8 +817,7 @@
                    .
 
 3. *Build the Updated Kernel Source:* To build the updated kernel
-   source, use ``devtool``:
-   ::
+   source, use ``devtool``::
 
       $ devtool build linux-yocto
 
@@ -872,8 +842,7 @@
    using QEMU to verify your changes:
 
    1. *Boot the image*: Boot the modified image in the QEMU emulator
-      using this command:
-      ::
+      using this command::
 
          $ runqemu qemux86
 
@@ -891,8 +860,7 @@
 
 6. *Stage and commit your changes*: Within your eSDK terminal, change
    your working directory to where you modified the ``calibrate.c`` file
-   and use these Git commands to stage and commit your changes:
-   ::
+   and use these Git commands to stage and commit your changes::
 
       $ cd poky_sdk/workspace/sources/linux-yocto
       $ git status
@@ -921,8 +889,7 @@
    image that includes your kernel patches. Execute the following
    command from your
    :term:`Build Directory` in the terminal
-   set up to run BitBake:
-   ::
+   set up to run BitBake::
 
       $ cd poky/build
       $ bitbake core-image-minimal
@@ -966,14 +933,12 @@
    1. *Change the working directory*: You need to locate the source
       files in the local copy of the kernel Git repository. Change to
       where the kernel source code is before making your edits to the
-      ``calibrate.c`` file:
-      ::
+      ``calibrate.c`` file::
 
          $ cd ~/linux-yocto-4.12/init
 
    2. *Edit the source file*: Edit the ``calibrate.c`` file to have the
-      following changes:
-      ::
+      following changes::
 
          void calibrate_delay(void)
          {
@@ -993,8 +958,7 @@
                    .
 
 2. *Stage and Commit Your Changes:* Use standard Git commands to stage
-   and commit the changes you just made:
-   ::
+   and commit the changes you just made::
 
       $ git add calibrate.c
       $ git commit -m "calibrate.c - Added some printk statements"
@@ -1009,13 +973,11 @@
    updated kernel source files. Add
    :term:`SRC_URI` and
    :term:`SRCREV` statements similar
-   to the following to your ``local.conf``:
-   ::
+   to the following to your ``local.conf``::
 
       $ cd poky/build/conf
 
-   Add the following to the ``local.conf``:
-   ::
+   Add the following to the ``local.conf``::
 
       SRC_URI_pn-linux-yocto = "git:///path-to/linux-yocto-4.12;protocol=file;name=machine;branch=standard/base; \
                                 git:///path-to/yocto-kernel-cache;protocol=file;type=kmeta;name=meta;branch=yocto-4.12;destsuffix=${KMETA}"
@@ -1031,16 +993,14 @@
 
 4. *Build the Image:* With the source modified, your changes staged and
    committed, and the ``local.conf`` file pointing to the kernel files,
-   you can now use BitBake to build the image:
-   ::
+   you can now use BitBake to build the image::
 
       $ cd poky/build
       $ bitbake core-image-minimal
 
 5. *Boot the image*: Boot the modified image in the QEMU emulator using
    this command. When prompted to login to the QEMU console, use "root"
-   with no password:
-   ::
+   with no password::
 
       $ cd poky/build
       $ runqemu qemux86
@@ -1059,8 +1019,7 @@
 
 7. *Generate the Patch File:* Once you are sure that your patch works
    correctly, you can generate a ``*.patch`` file in the kernel source
-   repository:
-   ::
+   repository::
 
       $ cd ~/linux-yocto-4.12/init
       $ git format-patch -1
@@ -1073,8 +1032,7 @@
    ``meta-mylayer``. When the layer was created using the
    ``yocto-create`` script, no additional hierarchy was created to
    support patches. Before moving the patch file, you need to add
-   additional structure to your layer using the following commands:
-   ::
+   additional structure to your layer using the following commands::
 
       $ cd ~/meta-mylayer
       $ mkdir recipes-kernel
@@ -1083,8 +1041,7 @@
 
    Once you have created this
    hierarchy in your layer, you can move the patch file using the
-   following command:
-   ::
+   following command::
 
       $ mv ~/linux-yocto-4.12/init/0001-calibrate.c-Added-some-printk-statements.patch ~/meta-mylayer/recipes-kernel/linux/linux-yocto
 
@@ -1093,8 +1050,7 @@
    the OpenEmbedded build system to find the patch. The append file
    needs to be in your layer's ``recipes-kernel/linux`` directory and it
    must be named ``linux-yocto_4.12.bbappend`` and have the following
-   contents:
-   ::
+   contents::
 
       FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
       SRC_URI_append = "file://0001-calibrate.c-Added-some-printk-statements.patch"
@@ -1113,8 +1069,7 @@
       To build ``core-image-minimal`` again and see the effects of your patch,
       you can essentially eliminate the temporary source files saved in
       ``poky/build/tmp/work/...`` and residual effects of the build by entering
-      the following sequence of commands:
-      ::
+      the following sequence of commands::
 
               $ cd poky/build
               $ bitbake -c cleanall yocto-linux
@@ -1160,8 +1115,7 @@
 -  You must be sure of the state of your build's configuration in the
    :term:`Source Directory`.
 
--  Your build host must have the following two packages installed:
-   ::
+-  Your build host must have the following two packages installed::
 
       libncurses5-dev
       libtinfo-dev
@@ -1169,8 +1123,7 @@
 The following commands initialize the BitBake environment, run the
 :ref:`ref-tasks-kernel_configme`
 task, and launch ``menuconfig``. These commands assume the Source
-Directory's top-level folder is ``poky``:
-::
+Directory's top-level folder is ``poky``::
 
    $ cd poky
    $ source oe-init-build-env
@@ -1232,8 +1185,7 @@
 
 Within the ``.config`` file, you can see the kernel settings. For
 example, the following entry shows that symmetric multi-processor
-support is not set:
-::
+support is not set::
 
    # CONFIG_SMP is not set
 
@@ -1274,8 +1226,7 @@
 file to "defconfig" (e.g.
 ``~/meta-mylayer/recipes-kernel/linux/linux-yocto/defconfig``). Then,
 add the following lines to the linux-yocto ``.bbappend`` file in your
-layer:
-::
+layer::
 
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
    SRC_URI += "file://defconfig"
@@ -1323,8 +1274,7 @@
 It is simple to create a configuration fragment. One method is to use
 shell commands. For example, issuing the following from the shell
 creates a configuration fragment file named ``my_smp.cfg`` that enables
-multi-processor support within the kernel:
-::
+multi-processor support within the kernel::
 
    $ echo "CONFIG_SMP=y" >> my_smp.cfg
 
@@ -1342,8 +1292,7 @@
 steps:
 
 1. *Complete a Build Through Kernel Configuration:* Complete a build at
-   least through the kernel configuration task as follows:
-   ::
+   least through the kernel configuration task as follows::
 
       $ bitbake linux-yocto -c kernel_configme -f
 
@@ -1352,8 +1301,7 @@
    your build state might become unknown, it is best to run this task
    prior to starting ``menuconfig``.
 
-2. *Launch menuconfig:* Run the ``menuconfig`` command:
-   ::
+2. *Launch menuconfig:* Run the ``menuconfig`` command::
 
       $ bitbake linux-yocto -c menuconfig
 
@@ -1361,8 +1309,7 @@
    to prepare a configuration fragment. The resulting file
    ``fragment.cfg`` is placed in the
    ``${``\ :term:`WORKDIR`\ ``}``
-   directory:
-   ::
+   directory::
 
       $ bitbake linux-yocto -c diffconfig
 
@@ -1387,8 +1334,7 @@
 directory named ``linux-yocto`` that resides in the same directory as
 the kernel's append file within your layer and then add the following
 statements to the kernel's append file, those configuration options will
-be picked up and applied when the kernel is built:
-::
+be picked up and applied when the kernel is built::
 
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
    SRC_URI += "file://myconfig.cfg"
@@ -1397,8 +1343,7 @@
 files and name them all in the ``SRC_URI`` statement as well. For
 example, you could group separate configurations specifically for
 Ethernet and graphics into their own files and add those by using a
-``SRC_URI`` statement like the following in your append file:
-::
+``SRC_URI`` statement like the following in your append file::
 
    SRC_URI += "file://myconfig.cfg \
                file://eth.cfg \
@@ -1409,8 +1354,7 @@
 
 You can use the
 :ref:`ref-tasks-kernel_configcheck`
-task to provide configuration validation:
-::
+task to provide configuration validation::
 
    $ bitbake linux-yocto -c kernel_configcheck -f
 
@@ -1537,8 +1481,7 @@
    successfully. Use this configuration file as your baseline.
 
 2. *Run Configure and Check Tasks:* Separately run the
-   ``do_kernel_configme`` and ``do_kernel_configcheck`` tasks:
-   ::
+   ``do_kernel_configme`` and ``do_kernel_configcheck`` tasks::
 
       $ bitbake linux-yocto -c kernel_configme -f
       $ bitbake linux-yocto -c kernel_configcheck -f
@@ -1572,8 +1515,7 @@
 Sometimes it is helpful to determine what a variable expands to during a
 build. You can examine the values of variables by examining the
 output of the ``bitbake -e`` command. The output is long and is more
-easily managed in a text file, which allows for easy searches:
-::
+easily managed in a text file, which allows for easy searches::
 
    $ bitbake -e virtual/kernel > some_text_file
 
@@ -1590,15 +1532,13 @@
 
 1. *Discover the Uncommitted Changes:* Go to the kernel's locally cloned
    Git repository (source directory) and use the following Git command
-   to list the files that have been changed, added, or removed:
-   ::
+   to list the files that have been changed, added, or removed::
 
       $ git status
 
 2. *Commit the Changes:* You should commit those changes to the kernel
    source tree regardless of whether or not you will save, export, or
-   use the changes:
-   ::
+   use the changes::
 
       $ git add
       $ git commit -s -a -m "getting rid of -dirty"
@@ -1633,8 +1573,7 @@
 ``kernel.org`` sources and the Yocto Project Linux kernel tools for
 managing kernel Metadata. You can find this recipe in the ``poky`` Git
 repository of the Yocto Project :yocto_git:`Source Repository <>`
-at:
-::
+at::
 
    poky/meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb
 
@@ -1655,8 +1594,7 @@
    ``defconfig`` file or configuration fragment files in your layer.
    When you use the ``linux-yocto-custom.bb`` recipe, you must specify a
    configuration. If you do not have a ``defconfig`` file, you can run
-   the following:
-   ::
+   the following::
 
       $ make defconfig
 
@@ -1708,8 +1646,7 @@
       ``LINUX_VERSION`` with the Source Control Manager (SCM) revision
       as derived from the :term:`SRCPV`
       variable. The combined results are a string with the following
-      form:
-      ::
+      form::
 
          3.19.11+git1+68a635bf8dfb64b02263c1ac80c948647cc76d5f_1+218bd8d2022b9852c60d32f0d770931e3cf343e2
 
@@ -1723,8 +1660,7 @@
       triggers an explicit build failure. You must change it to match a
       list of the machines that your new recipe supports. For example,
       to support the ``qemux86`` and ``qemux86-64`` machines, use the
-      following form:
-      ::
+      following form::
 
          COMPATIBLE_MACHINE = "qemux86|qemux86-64"
 
@@ -1807,8 +1743,7 @@
 
 Depending on the build system used by the module sources, you might need
 to make some adjustments. For example, a typical module ``Makefile``
-looks much like the one provided with the ``hello-mod`` template:
-::
+looks much like the one provided with the ``hello-mod`` template::
 
    obj-m := hello.o
 
@@ -1845,8 +1780,7 @@
 -  :term:`MACHINE_EXTRA_RRECOMMENDS`
 
 Modules are often not required for boot and can be excluded from certain
-build configurations. The following allows for the most flexibility:
-::
+build configurations. The following allows for the most flexibility::
 
    MACHINE_EXTRA_RRECOMMENDS += "kernel-module-mymodule"
 
@@ -1895,26 +1829,22 @@
 
    $ git whatchanged origin/standard/base..origin/standard/emenlow
 
-To see short, one line summaries of changes use the ``git log`` command:
-::
+To see short, one line summaries of changes use the ``git log`` command::
 
    $ git log --oneline origin/standard/base..origin/standard/emenlow
 
-Use this command to see code differences for the changes:
-::
+Use this command to see code differences for the changes::
 
    $ git diff origin/standard/base..origin/standard/emenlow
 
 Use this command to see the commit log messages and the text
-differences:
-::
+differences::
 
    $ git show origin/standard/base..origin/standard/emenlow
 
 Use this command to create individual patches for each change. Here is
 an example that creates patch files for each commit and places them
-in your ``Documents`` directory:
-::
+in your ``Documents`` directory::
 
    $ git format-patch -o $HOME/Documents origin/standard/base..origin/standard/emenlow
 
@@ -1923,15 +1853,13 @@
 
 Tags in the Yocto Project kernel tree divide changes for significant
 features or branches. The ``git show`` tag command shows changes based
-on a tag. Here is an example that shows ``systemtap`` changes:
-::
+on a tag. Here is an example that shows ``systemtap`` changes::
 
    $ git show systemtap
 
 You can use the ``git branch --contains`` tag command to
 show the branches that contain a particular feature. This command shows
-the branches that contain the ``systemtap`` feature:
-::
+the branches that contain the ``systemtap`` feature::
 
    $ git branch --contains systemtap
 
@@ -1986,8 +1914,7 @@
          searched during the build as potential feature directories.
 
    Continuing with the example, suppose the "test.scc" feature you are
-   adding has a ``test.scc`` file in the following directory:
-   ::
+   adding has a ``test.scc`` file in the following directory::
 
       my_recipe
       |
@@ -2001,8 +1928,7 @@
    a similarly named configuration fragment file ``test.cfg``.
 
 2. *Add the Feature File to SRC_URI:* Add the ``.scc`` file to the
-   recipe's ``SRC_URI`` statement:
-   ::
+   recipe's ``SRC_URI`` statement::
 
       SRC_URI_append = " file://test.scc"
 
@@ -2011,8 +1937,7 @@
 
 3. *Specify the Feature as a Kernel Feature:* Use the
    ``KERNEL_FEATURES`` statement to specify the feature as a kernel
-   feature:
-   ::
+   feature::
 
       KERNEL_FEATURES_append = " test.scc"