diff --git a/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst
new file mode 100644
index 0000000..f62ddff
--- /dev/null
+++ b/poky/bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.rst
@@ -0,0 +1,652 @@
+.. SPDX-License-Identifier: CC-BY-2.5
+
+=====================
+File Download Support
+=====================
+
+|
+
+BitBake's fetch module is a standalone piece of library code that deals
+with the intricacies of downloading source code and files from remote
+systems. Fetching source code is one of the cornerstones of building
+software. As such, this module forms an important part of BitBake.
+
+The current fetch module is called "fetch2" and refers to the fact that
+it is the second major version of the API. The original version is
+obsolete and has been removed from the codebase. Thus, in all cases,
+"fetch" refers to "fetch2" in this manual.
+
+The Download (Fetch)
+====================
+
+BitBake takes several steps when fetching source code or files. The
+fetcher codebase deals with two distinct processes in order: obtaining
+the files from somewhere (cached or otherwise) and then unpacking those
+files into a specific location and perhaps in a specific way. Getting
+and unpacking the files is often optionally followed by patching.
+Patching, however, is not covered by this module.
+
+The code to execute the first part of this process, a fetch, looks
+something like the following: ::
+
+   src_uri = (d.getVar('SRC_URI') or "").split()
+   fetcher = bb.fetch2.Fetch(src_uri, d)
+   fetcher.download()
+
+This code sets up an instance of the fetch class. The instance uses a
+space-separated list of URLs from the :term:`SRC_URI`
+variable and then calls the ``download`` method to download the files.
+
+The instantiation of the fetch class is usually followed by: ::
+
+   rootdir = l.getVar('WORKDIR')
+   fetcher.unpack(rootdir)
+
+This code unpacks the downloaded files to the specified by ``WORKDIR``.
+
+.. note::
+
+   For convenience, the naming in these examples matches the variables
+   used by OpenEmbedded. If you want to see the above code in action,
+   examine the OpenEmbedded class file ``base.bbclass``
+   .
+
+The ``SRC_URI`` and ``WORKDIR`` variables are not hardcoded into the
+fetcher, since those fetcher methods can be (and are) called with
+different variable names. In OpenEmbedded for example, the shared state
+(sstate) code uses the fetch module to fetch the sstate files.
+
+When the ``download()`` method is called, BitBake tries to resolve the
+URLs by looking for source files in a specific search order:
+
+-  *Pre-mirror Sites:* BitBake first uses pre-mirrors to try and find
+   source files. These locations are defined using the
+   :term:`PREMIRRORS` variable.
+
+-  *Source URI:* If pre-mirrors fail, BitBake uses the original URL (e.g
+   from ``SRC_URI``).
+
+-  *Mirror Sites:* If fetch failures occur, BitBake next uses mirror
+   locations as defined by the :term:`MIRRORS` variable.
+
+For each URL passed to the fetcher, the fetcher calls the submodule that
+handles that particular URL type. This behavior can be the source of
+some confusion when you are providing URLs for the ``SRC_URI`` variable.
+Consider the following two URLs: ::
+
+   http://git.yoctoproject.org/git/poky;protocol=git
+   git://git.yoctoproject.org/git/poky;protocol=http
+
+In the former case, the URL is passed to the ``wget`` fetcher, which does not
+understand "git". Therefore, the latter case is the correct form since the Git
+fetcher does know how to use HTTP as a transport.
+
+Here are some examples that show commonly used mirror definitions: ::
+
+   PREMIRRORS ?= "\
+      bzr://.*/.\*  http://somemirror.org/sources/ \\n \
+      cvs://.*/.\*  http://somemirror.org/sources/ \\n \
+      git://.*/.\*  http://somemirror.org/sources/ \\n \
+      hg://.*/.\*   http://somemirror.org/sources/ \\n \
+      osc://.*/.\*  http://somemirror.org/sources/ \\n \
+      p4://.*/.\*   http://somemirror.org/sources/ \\n \
+     svn://.*/.\*   http://somemirror.org/sources/ \\n"
+
+   MIRRORS =+ "\
+      ftp://.*/.\*   http://somemirror.org/sources/ \\n \
+      http://.*/.\*  http://somemirror.org/sources/ \\n \
+      https://.*/.\* http://somemirror.org/sources/ \\n"
+
+It is useful to note that BitBake
+supports cross-URLs. It is possible to mirror a Git repository on an
+HTTP server as a tarball. This is what the ``git://`` mapping in the
+previous example does.
+
+Since network accesses are slow, BitBake maintains a cache of files
+downloaded from the network. Any source files that are not local (i.e.
+downloaded from the Internet) are placed into the download directory,
+which is specified by the :term:`DL_DIR` variable.
+
+File integrity is of key importance for reproducing builds. For
+non-local archive downloads, the fetcher code can verify SHA-256 and MD5
+checksums to ensure the archives have been downloaded correctly. You can
+specify these checksums by using the ``SRC_URI`` variable with the
+appropriate varflags as follows: ::
+
+   SRC_URI[md5sum] = "value"
+   SRC_URI[sha256sum] = "value"
+
+You can also specify the checksums as
+parameters on the ``SRC_URI`` as shown below: ::
+
+  SRC_URI = "http://example.com/foobar.tar.bz2;md5sum=4a8e0f237e961fd7785d19d07fdb994d"
+
+If multiple URIs exist, you can specify the checksums either directly as
+in the previous example, or you can name the URLs. The following syntax
+shows how you name the URIs: ::
+
+   SRC_URI = "http://example.com/foobar.tar.bz2;name=foo"
+   SRC_URI[foo.md5sum] = 4a8e0f237e961fd7785d19d07fdb994d
+
+After a file has been downloaded and
+has had its checksum checked, a ".done" stamp is placed in ``DL_DIR``.
+BitBake uses this stamp during subsequent builds to avoid downloading or
+comparing a checksum for the file again.
+
+.. note::
+
+   It is assumed that local storage is safe from data corruption. If
+   this were not the case, there would be bigger issues to worry about.
+
+If :term:`BB_STRICT_CHECKSUM` is set, any
+download without a checksum triggers an error message. The
+:term:`BB_NO_NETWORK` variable can be used to
+make any attempted network access a fatal error, which is useful for
+checking that mirrors are complete as well as other things.
+
+.. _bb-the-unpack:
+
+The Unpack
+==========
+
+The unpack process usually immediately follows the download. For all
+URLs except Git URLs, BitBake uses the common ``unpack`` method.
+
+A number of parameters exist that you can specify within the URL to
+govern the behavior of the unpack stage:
+
+-  *unpack:* Controls whether the URL components are unpacked. If set to
+   "1", which is the default, the components are unpacked. If set to
+   "0", the unpack stage leaves the file alone. This parameter is useful
+   when you want an archive to be copied in and not be unpacked.
+
+-  *dos:* Applies to ``.zip`` and ``.jar`` files and specifies whether
+   to use DOS line ending conversion on text files.
+
+-  *basepath:* Instructs the unpack stage to strip the specified
+   directories from the source path when unpacking.
+
+-  *subdir:* Unpacks the specific URL to the specified subdirectory
+   within the root directory.
+
+The unpack call automatically decompresses and extracts files with ".Z",
+".z", ".gz", ".xz", ".zip", ".jar", ".ipk", ".rpm". ".srpm", ".deb" and
+".bz2" extensions as well as various combinations of tarball extensions.
+
+As mentioned, the Git fetcher has its own unpack method that is
+optimized to work with Git trees. Basically, this method works by
+cloning the tree into the final directory. The process is completed
+using references so that there is only one central copy of the Git
+metadata needed.
+
+.. _bb-fetchers:
+
+Fetchers
+========
+
+As mentioned earlier, the URL prefix determines which fetcher submodule
+BitBake uses. Each submodule can support different URL parameters, which
+are described in the following sections.
+
+.. _local-file-fetcher:
+
+Local file fetcher (``file://``)
+--------------------------------
+
+This submodule handles URLs that begin with ``file://``. The filename
+you specify within the URL can be either an absolute or relative path to
+a file. If the filename is relative, the contents of the
+:term:`FILESPATH` variable is used in the same way
+``PATH`` is used to find executables. If the file cannot be found, it is
+assumed that it is available in :term:`DL_DIR` by the
+time the ``download()`` method is called.
+
+If you specify a directory, the entire directory is unpacked.
+
+Here are a couple of example URLs, the first relative and the second
+absolute: ::
+
+   SRC_URI = "file://relativefile.patch"
+   SRC_URI = "file:///Users/ich/very_important_software"
+
+.. _http-ftp-fetcher:
+
+HTTP/FTP wget fetcher (``http://``, ``ftp://``, ``https://``)
+-------------------------------------------------------------
+
+This fetcher obtains files from web and FTP servers. Internally, the
+fetcher uses the wget utility.
+
+The executable and parameters used are specified by the
+``FETCHCMD_wget`` variable, which defaults to sensible values. The
+fetcher supports a parameter "downloadfilename" that allows the name of
+the downloaded file to be specified. Specifying the name of the
+downloaded file is useful for avoiding collisions in
+:term:`DL_DIR` when dealing with multiple files that
+have the same name.
+
+Some example URLs are as follows: ::
+
+   SRC_URI = "http://oe.handhelds.org/not_there.aac"
+   SRC_URI = "ftp://oe.handhelds.org/not_there_as_well.aac"
+   SRC_URI = "ftp://you@oe.handhelds.org/home/you/secret.plan"
+
+.. note::
+
+   Because URL parameters are delimited by semi-colons, this can
+   introduce ambiguity when parsing URLs that also contain semi-colons,
+   for example:
+   ::
+
+           SRC_URI = "http://abc123.org/git/?p=gcc/gcc.git;a=snapshot;h=a5dd47"
+
+
+   Such URLs should should be modified by replacing semi-colons with '&'
+   characters:
+   ::
+
+           SRC_URI = "http://abc123.org/git/?p=gcc/gcc.git&a=snapshot&h=a5dd47"
+
+
+   In most cases this should work. Treating semi-colons and '&' in
+   queries identically is recommended by the World Wide Web Consortium
+   (W3C). Note that due to the nature of the URL, you may have to
+   specify the name of the downloaded file as well:
+   ::
+
+           SRC_URI = "http://abc123.org/git/?p=gcc/gcc.git&a=snapshot&h=a5dd47;downloadfilename=myfile.bz2"
+
+
+.. _cvs-fetcher:
+
+CVS fetcher (``(cvs://``)
+-------------------------
+
+This submodule handles checking out files from the CVS version control
+system. You can configure it using a number of different variables:
+
+-  :term:`FETCHCMD_cvs <FETCHCMD>`: The name of the executable to use when running
+   the ``cvs`` command. This name is usually "cvs".
+
+-  :term:`SRCDATE`: The date to use when fetching the CVS source code. A
+   special value of "now" causes the checkout to be updated on every
+   build.
+
+-  :term:`CVSDIR`: Specifies where a temporary
+   checkout is saved. The location is often ``DL_DIR/cvs``.
+
+-  CVS_PROXY_HOST: The name to use as a "proxy=" parameter to the
+   ``cvs`` command.
+
+-  CVS_PROXY_PORT: The port number to use as a "proxyport="
+   parameter to the ``cvs`` command.
+
+As well as the standard username and password URL syntax, you can also
+configure the fetcher with various URL parameters:
+
+The supported parameters are as follows:
+
+-  *"method":* The protocol over which to communicate with the CVS
+   server. By default, this protocol is "pserver". If "method" is set to
+   "ext", BitBake examines the "rsh" parameter and sets ``CVS_RSH``. You
+   can use "dir" for local directories.
+
+-  *"module":* Specifies the module to check out. You must supply this
+   parameter.
+
+-  *"tag":* Describes which CVS TAG should be used for the checkout. By
+   default, the TAG is empty.
+
+-  *"date":* Specifies a date. If no "date" is specified, the
+   :term:`SRCDATE` of the configuration is used to
+   checkout a specific date. The special value of "now" causes the
+   checkout to be updated on every build.
+
+-  *"localdir":* Used to rename the module. Effectively, you are
+   renaming the output directory to which the module is unpacked. You
+   are forcing the module into a special directory relative to
+   :term:`CVSDIR`.
+
+-  *"rsh":* Used in conjunction with the "method" parameter.
+
+-  *"scmdata":* Causes the CVS metadata to be maintained in the tarball
+   the fetcher creates when set to "keep". The tarball is expanded into
+   the work directory. By default, the CVS metadata is removed.
+
+-  *"fullpath":* Controls whether the resulting checkout is at the
+   module level, which is the default, or is at deeper paths.
+
+-  *"norecurse":* Causes the fetcher to only checkout the specified
+   directory with no recurse into any subdirectories.
+
+-  *"port":* The port to which the CVS server connects.
+
+Some example URLs are as follows: ::
+
+   SRC_URI = "cvs://CVSROOT;module=mymodule;tag=some-version;method=ext"
+   SRC_URI = "cvs://CVSROOT;module=mymodule;date=20060126;localdir=usethat"
+
+.. _svn-fetcher:
+
+Subversion (SVN) Fetcher (``svn://``)
+-------------------------------------
+
+This fetcher submodule fetches code from the Subversion source control
+system. The executable used is specified by ``FETCHCMD_svn``, which
+defaults to "svn". The fetcher's temporary working directory is set by
+:term:`SVNDIR`, which is usually ``DL_DIR/svn``.
+
+The supported parameters are as follows:
+
+-  *"module":* The name of the svn module to checkout. You must provide
+   this parameter. You can think of this parameter as the top-level
+   directory of the repository data you want.
+
+-  *"path_spec":* A specific directory in which to checkout the
+   specified svn module.
+
+-  *"protocol":* The protocol to use, which defaults to "svn". If
+   "protocol" is set to "svn+ssh", the "ssh" parameter is also used.
+
+-  *"rev":* The revision of the source code to checkout.
+
+-  *"scmdata":* Causes the “.svn” directories to be available during
+   compile-time when set to "keep". By default, these directories are
+   removed.
+
+-  *"ssh":* An optional parameter used when "protocol" is set to
+   "svn+ssh". You can use this parameter to specify the ssh program used
+   by svn.
+
+-  *"transportuser":* When required, sets the username for the
+   transport. By default, this parameter is empty. The transport
+   username is different than the username used in the main URL, which
+   is passed to the subversion command.
+
+Following are three examples using svn: ::
+
+   SRC_URI = "svn://myrepos/proj1;module=vip;protocol=http;rev=667"
+   SRC_URI = "svn://myrepos/proj1;module=opie;protocol=svn+ssh"
+   SRC_URI = "svn://myrepos/proj1;module=trunk;protocol=http;path_spec=${MY_DIR}/proj1"
+
+.. _git-fetcher:
+
+Git Fetcher (``git://``)
+------------------------
+
+This fetcher submodule fetches code from the Git source control system.
+The fetcher works by creating a bare clone of the remote into
+:term:`GITDIR`, which is usually ``DL_DIR/git2``. This
+bare clone is then cloned into the work directory during the unpack
+stage when a specific tree is checked out. This is done using alternates
+and by reference to minimize the amount of duplicate data on the disk
+and make the unpack process fast. The executable used can be set with
+``FETCHCMD_git``.
+
+This fetcher supports the following parameters:
+
+-  *"protocol":* The protocol used to fetch the files. The default is
+   "git" when a hostname is set. If a hostname is not set, the Git
+   protocol is "file". You can also use "http", "https", "ssh" and
+   "rsync".
+
+-  *"nocheckout":* Tells the fetcher to not checkout source code when
+   unpacking when set to "1". Set this option for the URL where there is
+   a custom routine to checkout code. The default is "0".
+
+-  *"rebaseable":* Indicates that the upstream Git repository can be
+   rebased. You should set this parameter to "1" if revisions can become
+   detached from branches. In this case, the source mirror tarball is
+   done per revision, which has a loss of efficiency. Rebasing the
+   upstream Git repository could cause the current revision to disappear
+   from the upstream repository. This option reminds the fetcher to
+   preserve the local cache carefully for future use. The default value
+   for this parameter is "0".
+
+-  *"nobranch":* Tells the fetcher to not check the SHA validation for
+   the branch when set to "1". The default is "0". Set this option for
+   the recipe that refers to the commit that is valid for a tag instead
+   of the branch.
+
+-  *"bareclone":* Tells the fetcher to clone a bare clone into the
+   destination directory without checking out a working tree. Only the
+   raw Git metadata is provided. This parameter implies the "nocheckout"
+   parameter as well.
+
+-  *"branch":* The branch(es) of the Git tree to clone. If unset, this
+   is assumed to be "master". The number of branch parameters much match
+   the number of name parameters.
+
+-  *"rev":* The revision to use for the checkout. The default is
+   "master".
+
+-  *"tag":* Specifies a tag to use for the checkout. To correctly
+   resolve tags, BitBake must access the network. For that reason, tags
+   are often not used. As far as Git is concerned, the "tag" parameter
+   behaves effectively the same as the "rev" parameter.
+
+-  *"subpath":* Limits the checkout to a specific subpath of the tree.
+   By default, the whole tree is checked out.
+
+-  *"destsuffix":* The name of the path in which to place the checkout.
+   By default, the path is ``git/``.
+
+-  *"usehead":* Enables local ``git://`` URLs to use the current branch
+   HEAD as the revision for use with ``AUTOREV``. The "usehead"
+   parameter implies no branch and only works when the transfer protocol
+   is ``file://``.
+
+Here are some example URLs: ::
+
+   SRC_URI = "git://git.oe.handhelds.org/git/vip.git;tag=version-1"
+   SRC_URI = "git://git.oe.handhelds.org/git/vip.git;protocol=http"
+
+.. _gitsm-fetcher:
+
+Git Submodule Fetcher (``gitsm://``)
+------------------------------------
+
+This fetcher submodule inherits from the :ref:`Git
+fetcher<bitbake-user-manual/bitbake-user-manual-fetching:git fetcher
+(\`\`git://\`\`)>` and extends that fetcher's behavior by fetching a
+repository's submodules. :term:`SRC_URI` is passed to the Git fetcher as
+described in the :ref:`bitbake-user-manual/bitbake-user-manual-fetching:git
+fetcher (\`\`git://\`\`)` section.
+
+.. note::
+
+   You must clean a recipe when switching between '``git://``' and
+   '``gitsm://``' URLs.
+
+   The Git Submodules fetcher is not a complete fetcher implementation.
+   The fetcher has known issues where it does not use the normal source
+   mirroring infrastructure properly. Further, the submodule sources it
+   fetches are not visible to the licensing and source archiving
+   infrastructures.
+
+.. _clearcase-fetcher:
+
+ClearCase Fetcher (``ccrc://``)
+-------------------------------
+
+This fetcher submodule fetches code from a
+`ClearCase <http://en.wikipedia.org/wiki/Rational_ClearCase>`__
+repository.
+
+To use this fetcher, make sure your recipe has proper
+:term:`SRC_URI`, :term:`SRCREV`, and
+:term:`PV` settings. Here is an example: ::
+
+   SRC_URI = "ccrc://cc.example.org/ccrc;vob=/example_vob;module=/example_module"
+   SRCREV = "EXAMPLE_CLEARCASE_TAG"
+   PV = "${@d.getVar("SRCREV", False).replace("/", "+")}"
+
+The fetcher uses the ``rcleartool`` or
+``cleartool`` remote client, depending on which one is available.
+
+Following are options for the ``SRC_URI`` statement:
+
+-  *vob*: The name, which must include the prepending "/" character,
+   of the ClearCase VOB. This option is required.
+
+-  *module*: The module, which must include the prepending "/"
+   character, in the selected VOB.
+
+   .. note::
+
+      The module and vob options are combined to create the load rule in the
+      view config spec. As an example, consider the vob and module values from
+      the SRC_URI statement at the start of this section. Combining those values
+      results in the following: ::
+
+         load /example_vob/example_module
+
+-  *proto*: The protocol, which can be either ``http`` or ``https``.
+
+By default, the fetcher creates a configuration specification. If you
+want this specification written to an area other than the default, use
+the ``CCASE_CUSTOM_CONFIG_SPEC`` variable in your recipe to define where
+the specification is written.
+
+.. note::
+
+   the SRCREV loses its functionality if you specify this variable. However,
+   SRCREV is still used to label the archive after a fetch even though it does
+   not define what is fetched.
+
+Here are a couple of other behaviors worth mentioning:
+
+-  When using ``cleartool``, the login of ``cleartool`` is handled by
+   the system. The login require no special steps.
+
+-  In order to use ``rcleartool`` with authenticated users, an
+   "rcleartool login" is necessary before using the fetcher.
+
+.. _perforce-fetcher:
+
+Perforce Fetcher (``p4://``)
+----------------------------
+
+This fetcher submodule fetches code from the
+`Perforce <https://www.perforce.com/>`__ source control system. The
+executable used is specified by ``FETCHCMD_p4``, which defaults to "p4".
+The fetcher's temporary working directory is set by
+:term:`P4DIR`, which defaults to "DL_DIR/p4".
+The fetcher does not make use of a perforce client, instead it
+relies on ``p4 files`` to retrieve a list of
+files and ``p4 print`` to transfer the content
+of those files locally.
+
+To use this fetcher, make sure your recipe has proper
+:term:`SRC_URI`, :term:`SRCREV`, and
+:term:`PV` values. The p4 executable is able to use the
+config file defined by your system's ``P4CONFIG`` environment variable
+in order to define the Perforce server URL and port, username, and
+password if you do not wish to keep those values in a recipe itself. If
+you choose not to use ``P4CONFIG``, or to explicitly set variables that
+``P4CONFIG`` can contain, you can specify the ``P4PORT`` value, which is
+the server's URL and port number, and you can specify a username and
+password directly in your recipe within ``SRC_URI``.
+
+Here is an example that relies on ``P4CONFIG`` to specify the server URL
+and port, username, and password, and fetches the Head Revision: ::
+
+   SRC_URI = "p4://example-depot/main/source/..."
+   SRCREV = "${AUTOREV}"
+   PV = "p4-${SRCPV}"
+   S = "${WORKDIR}/p4"
+
+Here is an example that specifies the server URL and port, username, and
+password, and fetches a Revision based on a Label: ::
+
+   P4PORT = "tcp:p4server.example.net:1666"
+   SRC_URI = "p4://user:passwd@example-depot/main/source/..."
+   SRCREV = "release-1.0"
+   PV = "p4-${SRCPV}"
+   S = "${WORKDIR}/p4"
+
+.. note::
+
+   You should always set S to "${WORKDIR}/p4" in your recipe.
+
+By default, the fetcher strips the depot location from the local file paths. In
+the above example, the content of ``example-depot/main/source/`` will be placed
+in ``${WORKDIR}/p4``.  For situations where preserving parts of the remote depot
+paths locally is desirable, the fetcher supports two parameters:
+
+- *"module":*
+    The top-level depot location or directory to fetch. The value of this
+    parameter can also point to a single file within the depot, in which case
+    the local file path will include the module path.
+- *"remotepath":*
+    When used with the value "``keep``", the fetcher will mirror the full depot
+    paths locally for the specified location, even in combination with the
+    ``module`` parameter.
+
+Here is an example use of the the ``module`` parameter: ::
+
+   SRC_URI = "p4://user:passwd@example-depot/main;module=source/..."
+
+In this case, the content of the top-level directory ``source/`` will be fetched
+to ``${P4DIR}``, including the directory itself.  The top-level directory will
+be accesible at ``${P4DIR}/source/``.
+
+Here is an example use of the the ``remotepath`` parameter: ::
+
+   SRC_URI = "p4://user:passwd@example-depot/main;module=source/...;remotepath=keep"
+
+In this case, the content of the top-level directory ``source/`` will be fetched
+to ``${P4DIR}``, but the complete depot paths will be mirrored locally. The
+top-level directory will be accessible at
+``${P4DIR}/example-depot/main/source/``.
+
+.. _repo-fetcher:
+
+Repo Fetcher (``repo://``)
+--------------------------
+
+This fetcher submodule fetches code from ``google-repo`` source control
+system. The fetcher works by initiating and syncing sources of the
+repository into :term:`REPODIR`, which is usually
+``${DL_DIR}/repo``.
+
+This fetcher supports the following parameters:
+
+-  *"protocol":* Protocol to fetch the repository manifest (default:
+   git).
+
+-  *"branch":* Branch or tag of repository to get (default: master).
+
+-  *"manifest":* Name of the manifest file (default: ``default.xml``).
+
+Here are some example URLs: ::
+
+   SRC_URI = "repo://REPOROOT;protocol=git;branch=some_branch;manifest=my_manifest.xml"
+   SRC_URI = "repo://REPOROOT;protocol=file;branch=some_branch;manifest=my_manifest.xml"
+
+Other Fetchers
+--------------
+
+Fetch submodules also exist for the following:
+
+-  Bazaar (``bzr://``)
+
+-  Mercurial (``hg://``)
+
+-  npm (``npm://``)
+
+-  OSC (``osc://``)
+
+-  Secure FTP (``sftp://``)
+
+-  Secure Shell (``ssh://``)
+
+-  Trees using Git Annex (``gitannex://``)
+
+No documentation currently exists for these lesser used fetcher
+submodules. However, you might find the code helpful and readable.
+
+Auto Revisions
+==============
+
+We need to document ``AUTOREV`` and ``SRCREV_FORMAT`` here.