poky: subtree update:c67f57c09e..c6bc20857c

Adrian Freihofer (2):
      oe-publish-sdk: fix layers init via ssh
      oe-publish-sdk: add --keep-orig option

Alexander Kanavin (68):
      meta-selftest: correct the virgl test for 5.8 kernels
      bison: upgrade 3.6.4 -> 3.7.1
      util-linux: upgrade 2.35.2 -> 2.36
      python3-numpy: upgrade 1.19.0 -> 1.19.1
      python3-setuptools: upgrade 49.3.1 -> 49.6.0
      rsync: upgrade 3.2.2 -> 3.2.3
      util-linux: merge .inc into .bb
      acpica: upgrade 20200528 -> 20200717
      asciidoc: upgrade 9.0.1 -> 9.0.2
      cryptodev: upgrade 1.10 -> 1.11
      diffoscope: upgrade 153 -> 156
      epiphany: upgrade 3.36.3 -> 3.36.4
      font-alias: upgrade 1.0.3 -> 1.0.4
      gtk+3: upgrade 3.24.21 -> 3.24.22
      libcheck: upgrade 0.15.0 -> 0.15.2
      libinput: upgrade 1.16.0 -> 1.16.1
      libpipeline: upgrade 1.5.2 -> 1.5.3
      libx11: upgrade 1.6.9 -> 1.6.11
      linux-firmware: upgrade 20200619 -> 20200721
      man-pages: upgrade 5.07 -> 5.08
      mc: upgrade 4.8.24 -> 4.8.25
      mesa: upgrade 20.1.4 -> 20.1.5
      piglit: upgrade to latest revision
      re2c: upgrade 2.0 -> 2.0.2
      sysstat: upgrade 12.2.2 -> 12.4.0
      vala: upgrade 0.48.7 -> 0.48.9
      bootchart2: update 0.14.8 -> 0.14.9
      harfbuzz: convert to meson, enable gobject introspection
      pango: update 1.44.7 -> 1.46.0
      boost: update 1.73.0 -> 1.74.0
      xev: update 1.2.3 -> 1.2.4
      wpebackend-fdo: update 1.6.1 -> 1.7.1
      gpgme: update 1.13.1 -> 1.14.0
      libpsl: update 0.21.0 -> 0.21.1.
      gettext: update 0.20.2 -> 0.21
      cmake: update 3.17.3 -> 3.18.1
      linux-firmware: update 20200721 -> 20200817
      meson: update 0.55.0 -> 0.55.1
      systemd-boot: bump version to 246.2
      json-glib: inherit upstream-version-is-even
      packagegroup-core-device-devel: remove
      oeqa/x32lib: rework to use readelf from the host
      oeqa/multilib: rework to use readelf from the host
      oeqa/multilib: un-skip the connman test
      poky.conf: do not install packagegroup-core-device-devel into qemu images
      glib-2.0: update 2.64.4 -> 2.64.5
      cmake: upgrade 3.18.1 -> 3.18.2
      libxcrypt: upgrade 4.4.16 -> 4.4.17
      debianutils: upgrade 4.11 -> 4.11.1
      enchant2: upgrade 2.2.8 -> 2.2.9
      harfbuzz: upgrade 2.7.1 -> 2.7.2
      libmpc: upgrade 1.1.0 -> 1.2.0
      librepo: upgrade 1.12.0 -> 1.12.1
      libuv: upgrade 1.38.1 -> 1.39.0
      msmtp: upgrade 1.8.11 -> 1.8.12
      ninja: upgrade 1.10.0 -> 1.10.1
      p11-kit: upgrade 0.23.20 -> 0.23.21
      pango: upgrade 1.46.0 -> 1.46.1
      re2c: upgrade 2.0.2 -> 2.0.3
      resolvconf: upgrade 1.82 -> 1.83
      stress-ng: upgrade 0.11.18 -> 0.11.19
      gnu-config: update to latest revision
      nasm: update 2.15.03 -> 2.15.05
      libva-utils: fix upstream version check
      gnupg: update 2.2.21 -> 2.2.22
      libx11: update 1.6.11 -> 1.6.12
      mesa: update 20.1.5 -> 20.1.6
      xserver-xorg: update 1.20.8 -> 1.20.9

Andrey Zhizhikin (1):
      insane: check for missing update-alternatives inherit

Anibal Limon (1):
      recipes-kernel: linux-firmware add qcom-venus-{5.2,5.4} packages

Aníbal Limón (1):
      recipes-graphics/xorg-xserver: Add patch to fix segfault when probe

Armin Kuster (2):
      bind: update to 9.11.22 ESV
      core-image-sato: qemumips use 512 mem

Bruce Ashfield (30):
      linux-yocto/5.4: update to v5.4.59
      linux-yocto/5.8: update to v5.8.2
      yocto-bsp: update to v5.4.56
      yocto-bsp: update to v5.4.58
      qemu: bump default reference kernel to v5.8
      linux-yocto/5.8: fix perf and virtio_scsi warnings
      linux-yocto-rt/5.8: fix lttng-modules build
      linux-yocto/5.8: selftests/bpf: Prevent runqslower from racing on building bpftool
      linux-yocto/5.8: disable CONFIG_NFS_DISABLE_UDP_SUPPORT
      poky: set preferred version for linux-yocto to be v5.8
      poky-tiny: set preferred version to 5.8
      poky: add preferred version for linux-yocto-rt
      linux-yocto/5.8: update to v5.8.3
      linux-yocto/5.4: update to v5.4.60
      kernel: config cleanups for 5.8+
      linux-yocto/5.4: update to v5.4.61
      linux-yocto/5.8: update to v5.8.4
      linux-yocto/5.8: disable IKHEADERS in default builds
      kernel-yocto: allow promotion of configuration warnings to errors
      kernel-yocto: checksum all modifications to available kernel fragments directories
      lttng-modules/devupstream: bump to latest 2.12 commits
      linux-yocto-dev: bump to v5.9+
      linux-yocto/5.8: update to v5.8.5
      kernel-devsrc: account for HOSTCC and HOSTCXX
      linux-yocto/config: netfilter: Enable nat for ipv4 and ipv6
      linux-yocto/5.8: update to v5.8.8
      linux-yocto/5.4: update to v5.4.64
      linux-yocto/config: configuration warning cleanup
      linux-yocto/5.8: update to v5.8.9
      linux-yocto/5.4: update to v5.4.65

Changhyeok Bae (2):
      iw: upgrade 5.4 -> 5.8
      iputils: upgrade s20190709 -> s20200821

Chris Laplante (12):
      bitbake: compat.py: remove file since it no longer actually implements anything
      bitbake: COW: formatting
      bitbake: COW: migrate test suite into tests/cow
      cve-update-db-native: add progress handler
      cve-check/cve-update-db-native: use lockfile to fix usage under multiconfig
      cve-update-db-native: use context manager for cve_f
      cve-check: avoid FileNotFoundError if no do_cve_check task has run
      bitbake: utils: process_profilelog: use context manager
      bitbake: utils: fix UnboundLocalError when _print_exception raises
      cve-update-db-native: be less magical about checking whether the cve-check class is enabled
      cve-update-db-native: move -journal checking into do_fetch
      cve-update-db-native: remove unused variable

Christophe GUIBOUT (1):
      initramfs-framework: support kernel cmdline with double quotes

Denys Dmytriyenko (2):
      weston: upgrade 8.0.0 -> 9.0.0
      cryptodev: bump 1 commit past 1.11 to fix 5.9-rc1+

Diego Sueiro (2):
      license_image.bbclass: Create symlink to the image license manifest dir
      license_image.bbclass: Fix symlink to the image license manifest dir creation

Douglas Royds (1):
      tcmode-default: Drop gcc-cross-initial, gcc-crosssdk-initial references

Frazer Clews (1):
      bitbake: lib: fix most undefined code picked up by pylint

Geoff Parker (1):
      systemd-serialgetty: Replace sed quoting using ' with " to allow var expansion

Jacob Kroon (1):
      gcc10: Don't default back to -fcommon

Jean-Francois Dagenais (1):
      bitbake: siggen: clean_basepath: remove recipe full path when virtual:xyz present

Jens Rehsack (1):
      lttng-modules: backport patches from 2.12.x to fix 5.4.64+ and 5.8.9+ builds

Joe Slater (1):
      pseudo: fix renaming to self

Jon Mason (4):
      cortex-m0plus.inc: change file permissions
      tune-cortexa55.inc: clean-up ARMv8.2a uses
      tune-cortexa57-cortexa53.inc: add CRC and set march
      tune-cortexa*: Cleanups

Joshua Watt (8):
      wic: Add 512 Byte alignment to --offset
      oeqa: runtime_tests: Extra GPG debugging
      oeqa: sdk: Capture stderr output
      oeqa: reproducible: Fix test not producing diffs
      diffoscope: upgrade 156 -> 158
      bitbake: bitbake: Add parsing torture test
      bitbake: cooker: Block SIGINT in worker processes
      sphinx: dev-manual: Clarify that virtual providers do not apply to runtime dependencies

Kai Kang (1):
      dhcpcd: 9.1.4 -> 9.2.0

Kevin Hao (1):
      meta-yocto-bsp: Bump to the v5.8 kernel

Khairul Rohaizzat Jamaluddin (1):
      wic/bootimg-efi: IMAGE_EFI_BOOT_FILES variable added to separate bootimg-efi and bootimg-partition

Khem Raj (24):
      gcc-cross-canadian: Install gcc/g++ wrappers for musl
      uninative: Upgrade to 2.9
      packagegroup-core-tools-profile: Disable lttng-modules for riscv64
      lttng-modules: Disable on riscv64
      kexec-tools: Fix build with -fno-common on ppc
      lttng-tools: Do not build for riscv64
      util-linux: Allow update alternatives for additional apps
      lttng-tools: lttng-ust works on riscv64
      json-glib: Backport a build fix with clang
      rpcbind: Use update-alternatives for rpcinfo
      go: Upgrade to 1.15 major release
      weston-init: Redefine weston service and add socket activation option
      musl: Upgrade to latest master
      libucontext: Recognise riscv32 architecture
      linuxloader.bbclass: Define riscv32 ldso for musl
      populate_sdk_ext: Do not assume local.conf will always exist
      weston: plane_add_prop() calls break musl atomic modesetting
      weston-init: Enable RDP screen share
      weston-init: Do not use fbdev backend
      weston-init: Select drm/fbdev backends for qemu machines
      oeqa/weston: Fix tests to run with systemd
      core-image-weston: Bump qemu memory to 512M
      go: Update to 1.15.2 minor release
      bind: Inherit update-alternatives

Mark Hatle (6):
      package_tar.bbclass: Sync to the other package_* classes
      kernel.bbclass: Remove do_install[prefunc] no longer needed
      buildhistory.bbclass: Rework to use read_subpackage_metadata
      kernel.bbclass: Move away from calling package_get_auto_pr
      package.bbclass: hash equivalency and pr service
      bitbake: process.py: Handle SystemExit exception to eliminate backtrace

Mark Morton (1):
      sphinx: test-manual code block, link, and format update

Martin Jansa (7):
      devtool: expand SRC_URI when guessing recipe update mode
      image-artifact-names: introduce new bbclass and move some variables into it
      kernel.bbclass: use bash variables like imageType, base_name without {}
      kernel.bbclass: eliminate (initramfs_)symlink_name variables
      kernel.bbclass: use camelCase notation for bash variables in do_deploy
      *-initramfs: don't use .rootfs IMAGE_NAME_SUFFIX
      bitbake.conf: use ${TCMODE}-${TCLIBC} directory for CACHE

Matt Madison (1):
      image.bbclass: fix REPRODUCIBLE_TIMESTAMP_ROOTFS reference

Michael Gloff (2):
      sysvinit rc: Use PSPLASH_FIFO_DIR for progress fifo
      sysvinit: Remove ${B} assignment

Michael Tretter (1):
      devtool: deploy-target: Fix size calculation for hard links

Ming Liu (2):
      systemd: split systemd specific udev rules into its own package
      libubootenv: inherit uboot-config

Mingli Yu (3):
      qemu: always define unknown_lock_type
      qemu: override DEBUG_BUILD
      bison: remove the parallel build patch

Naveen Saini (1):
      lib/oe/recipeutils.py: add support for BBFILES_DYNAMIC

Nicolas Dechesne (73):
      linux-libc-headers: kernel headers are installed in STAGING_KERNEL_BUILDDIR
      bitbake: sphinx: add initial build infrastructure
      bitbake: sphinx: initial sphinx support
      bitbake: sphinx: bitbake-user-manual: use builtin sphinx glossary
      bitbake: sphinx: switch to readthedocs theme
      bitbake: sphinx: override theme CSS
      bitbake: sphinx: fixup for links
      bitbake: sphinx: fix links inside notes
      bitbake: sphinx: fixes all remaining warnings
      bitbake: sphinx: Makefile.sphinx: add clean and publish targets
      bitbake: sphinx: tweak html output a bit
      bitbake: sphinx: add SPDX headers
      bitbake: sphinx: index: move the boilerplate at the end of the page
      bitbake: sphinx: conf: enable extlinks extension
      bitbake: sphinx: add releases page
      bitbake: sphinx: bitbake-user-manual: insert additional blank line after title
      bitbake: sphinx: last manual round of fixes/improvements
      bitbake: sphinx: update style for important, caution and warnings
      bitbake: sphinx: remove leading '/'
      bitbake: sphinx: theme_override: properly set font for verbatim text
      bitbake: bitbake-user-manual: fix bad links
      sphinx: add initial build infrastructure
      sphinx: initial sphinx support
      sphinx: ref-variables: use builtin sphinx glossary
      sphinx: overview-manual: add figures
      sphinx: switch to readthedocs theme
      sphinx: Add SPDX license headers
      sphinx: add CSS theme override
      sphinx: bsp-guide: add figures
      sphinx: add Yocto project logo
      sphinx: conf: update copyright
      sphinx: conf: add substitutions/global variables
      sphinx: add boilerplate file
      sphinx: add boilerplate to manuals
      sphinx: ref-manual: add revision history table
      sphinx: add a general index
      sphinx: conf.py: enable sphinx.ext.autosectionlabel
      sphinx: ref-manual: use builtin glossary for the Terms section
      sphinx: fix internal links
      sphinx: ref-manual: fix typo
      sphinx: fix custom term links
      sphinx: manual updates for some links
      sphinx: dev-manual add figures
      sphinx: kernel-dev: add figures
      sphinx: profile-manual: add figures
      sphinx: fix up bold text for informalexample container
      sphinx: ref-manual: add figures
      sphinx: sdk-manual: add figures
      sphinx: test-manual: add figures
      sphinx: toaster-manual: add figures
      sphinx: add links for Yocto project website
      sphinx: fix links when the link text should be displayed
      sphinx: add links to terms in the BitBake glossary
      sphinx: add links to section in the Bitbake manual
      sphinx: setup extlink for docs.yoctoproject.org
      sphinx: enable intersphinx extension
      sphinx: insert blank below between title and toc
      sphinx: fix up terms related to kernel-fitimage
      sphinx: conf: a few rendering tweaks
      sphinx: makefile: add publish target
      sphinx: conf: include CSS/JS files, the proper way
      sphinx: convert 'what I wish I'd known'
      sphinx: convert 'transitioning to a custom environment'
      sphinx: ref-manual: fix heading for oe-init-build-env
      sphinx: brief-yoctoprojectqs: fix up all remaining rendering issues
      sphinx: Makefile.sphinx improvements
      sphinx: convert bsp-guide
      sphinx: remove leading '/'
      sphinx: update style for important, caution and warnings
      sphinx: profile-manual: convert profile-manual
      sphinx: theme_override: properly set font for verbatim text
      sphinx: theme_override: add tying-it-together admonition
      sphinx: conf: exclude adt-manual/*.rst

Oleksandr Kravchuk (1):
      ell: update to 0.33

Ovidiu Panait (1):
      libxml2: Fix CVE-2020-24977

Peter A. Bigot (2):
      bluez5: fix builds that require ell support
      timezone: include leap second data in tzdata-core

Peter Bergin (1):
      systemd: avoid failing if no udev rules provided

Pierre-Jean Texier (2):
      libubootenv: upgrade 0.3 -> 0.3.1
      diffoscope: upgrade 158 -> 160

Quentin Schulz (16):
      sphinx: brief-yoctoprojectqs: remove redundant welcome
      sphinx: brief-yoctoprojectqs: fix ambiguous note for cyclone5 example
      sphinx: brief-yoctoprojectqs: add missing boilerplate
      sphinx: overview-manual: add link to AUH how-to section
      sphinx: overview-manual: fix bitbake basic explanation
      sphinx: brief-yoctoprojectqs: add note on branch consistency between layers
      sphinx: what-i-wish-id-known: update "don't be fooled by doc search results"
      sphinx: overview-manual: remove highlight in bold section
      sphinx: replace special quotes with single and double quotes
      sphinx: fix incorrect indentations
      sphinx: brief-yoctoprojectqs: put other distros note after Ubuntu-specific packages
      sphinx: fix a few typos or missing/too many words
      sphinx: "highlight" some variables, tasks or files
      sphinx: fix or add missing links and remove mention of Eclipse workflow
      ref-manual: examples: hello-autotools: upgrade to 2.10
      ref-manual: examples: libxpm: add relative path to .inc

Rahul Kumar (1):
      systemd-serialgetty: Fix sed expression quoting

Rasmus Villemoes (1):
      kernel.bbclass: run do_symlink_kernsrc before do_patch

Richard Purdie (74):
      nativesdk-sdk-provides-dummy: Add /bin/sh
      bitbake: fetch2/wget: Remove buffering parameter
      bitbake: cooker: Ensure parse_quit thread is closed down
      bitbake: cooker: Explictly shut down the sync thread
      bitbake: fetch2: Drop cups.org from wget status checks
      bitbake: build/msg: Cleanup verbose option handling
      bitbake: cooker/cookerdata/main: Improve loglevel handling
      bitbake: cookerdata: Ensure UI options are updated to the server
      bitbake: cooker/cookerdata: Ensure UI event log is updated from commandline
      bitbake: cooker: Defer configuration init to after UI connection
      bitbake: server/process: Move the socket code to server process only
      bitbake: main/server/process: Drop configuration object passing
      bitbake: cooker: Ensure BB_ORIGENV is updated by changes to configuration.env
      bitbake: server/process: Log extra threads at exit
      bitbake: server/process: Add bitbake-server and exec() a new server process
      bitbake: runqueue: Don't use sys.argv
      bitbake: cooker: Ensure cooker's enviroment is updated on updateConfig
      connman-gnome/matchbox-desktop: Remove file:// globbing
      selftest/recipetool: Drop globbing SRC_URI test, no longer supported
      local.conf.sample: Document memory resident bitbake
      bitbake: fetch2: Drop globbing supprt in file:// SRC_URIs
      bitbake: server/process: Use sys.executable for bitbake-server
      bitbake: process: Avoid bb.utils.timeout
      bitbake: utils: Drop broken timeout function
      bitbake: server/process: Fix typo in code causing tracebacks
      oeqa/selftest: Apply patch to fix cpio build with -fno-common
      runqemu: Show an error for conflicting graphics options
      lttng: Move platform logic to dedicated inc file
      patchelf: upgrade 0.11 -> 0.12
      build-appliance/packagegroup-core-base-utils: Replace dhcp-client/dhcp-server with dhcpcd/kea
      selftest/prservice: Improve test failure message
      iputils: Adapt ${PN}-tftpd package dependency to PACKAGECONFIG
      bitbake: process/knotty: Improve early exception handling
      bitbake: cooker/cookerdata: Use BBHandledException, not sys.exit()
      bitbake: cookerdata: Fix exception raise statements
      bitbake: process: Avoid printing binary strings for leftover processes
      bitbake: server/process: Ensure logging is flushed
      bitbake: server/process: Don't show tracebacks if the lockfile is removed
      bitbake: cooker: Ensure parser replacement calls parser final_cleanup
      bitbake: cooker: Assign a name to the sync thread to aid debugging
      bitbake: server/process: Ensure we don't keep looping if some other server is started
      bitbake: server/process: Prefix the log data with pid/time information
      bitbake: server/process: Note when commands complete in logs
      bitbake: cooker: Ensure parser is cleaned up
      runqemu: Add a hook to allow it to renice
      bitbake: cooker: Avoid parser deadlocks
      bitbake: cooker: Ensure parser worker signal handlers are default
      selftest/signing: Ensure build path relocation is safe
      oeqa/concurrencytest: Improve builddir path manipulations
      bitbake: cooker/command: Fix disconnection handling
      bitbake: tinfoil: Ensure sockets don't leak even when exceptions occur
      bitbake: tests/fetch: Move away from problematic freedesktop.org urls
      bitbake: sphinx: Enhance the sphinx experience/nagivation with:
      bitbake: sphinx: theme_override: Use bold for emphasis text
      Revert "qemu: always define unknown_lock_type"
      Revert "core-image-sato: qemumips use 512 mem"
      sphinx: Organize top level docs
      sphinx: releases.rst: Add index/links to docs for previous releases
      sphinx: boilerplate.rst: Drop versions notes as we have better navigation now
      sphinx: boilerplate.rst: Sphinx puts the copyright elsewhere
      sphinx: history: Move revision history to its own section
      sphinx: manuals: Move boilerplate after toctree
      sphinx: Add support for multiple docs version
      sphinx: index.rst: Fix links
      sphinx: ref-system-requirements: Improve formatting of the notes sections, merging them
      sphinx: ref-manual links fixes and many other cleanups to import
      sphinx: dev-manual: Various URL, code block and other fixes to imported data
      sphinx: sdk-manual: Various URL, code block and other fixes to imported data
      sphinx: kernel-dev: Various URL, code block and other fixes to imported data
      sphinx: theme_override: Use bold for emphasis text
      sphinx: ref-tasks: Add populate_sdk_ext task definition
      sphinx: ref-manual/migration: Split each release into its own file
      sphinx: overview-manual: Various URL, code block and other fixes to imported data
      build-appliance-image: Update to master head revision

Robert Yang (3):
      bitbake: cooker.py: Save prioritized BBFILES to BBFILES_PRIORITIZED
      bitbake: utils.py: get_file_layer(): Exit the loop when file is matched
      bitbake: utils.py: get_file_layer(): Improve performance

Ross Burton (25):
      package.bbclass: explode the RPROVIDES so we don't think the versions are provides
      elfutils: silence a new QA warning
      insane: improve gnu-hash-style warning
      gdk-pixbuf: add tests PACKAGECONFIG
      debianutils: change SRC_URI to use snapshot.debian.org
      insane: only load real files as ELF
      autoconf: consolidate SRC_URI
      autoconf: consolidate DEPENDS
      kea: no need to depend on kea-native
      kea: don't use PACKAGECONFIG inappropriately
      kea: bump to 1.7.10
      help2man: rewrite recipe
      local.conf.sample.extended: remove help2man reference
      curl: add vendors to CVE_PRODUCT to exclude false positives
      harfbuzz: update patch status
      harfbuzz: fix a build race around hb-version.h
      cmake: whitelist CVE-2016-10642
      ncurses: remove config.cache
      qemu: fix CVE-2020-14364
      cve-update-db-native: remove unused import
      cve-update-db-native: add more logging when fetching
      cve-update-db-native: use fetch task
      alsa-plugins: improve .la removal
      sato-screenshot: improve .la removal
      buildhistory-diff: use BUILDDIR to know where buildhistory is

Saul Wold (1):
      gnupg: uprev 2.2.22 -> 2.2.23

Stacy Gaikovaia (2):
      bison: uprev from 3.7.1 to 3.7.2
      valgrind: fix memcheck vgtests remove fullpath-after flags

Steve Sakoman (1):
      xinput-calibrator: change SRC_URI to branch with libinput support

Sumit Garg (1):
      insane: fix gnu-hash-style check

TeohJayShen (1):
      oeqa/runtime: add test for matchbox-terminal

Tim Orling (1):
      sphinx: toaster-manual: fix vars, links, code blocks

Vijai Kumar K (2):
      image_types_wic: Add ASSUME_PROVIDED to WICVARS
      wic: misc: Add /bin to the list of searchpaths

Yanfei Xu (1):
      kernel-yocto: only replace leading -I in include paths

Yi Zhao (1):
      glib-networking: add ptest

Zhixiong Chi (1):
      gnutls: CVE-2020-24659

akuster (8):
      log4cplus: move meta-oe pkg to core
      kea: Move from meta-networking
      maintainers.inc: Add me as kea & log4plus maintainer.
      dhcpcd: Move from meta-network as OE-Core needs a client
      maintainers.inc: Add me as dhcpcd maintainer
      dhcp: remove from core
      bind: Add 9.16.x
      bind: 9.11 remove

hongxu (1):
      sysstat: fix installed-vs-shipped QA Issue in systemd

zangrc (4):
      libcap:upgrade 2.42 -> 2.43
      libcap-ng:upgrade 0.7.10 -> 0.7.11
      libgpg-error:upgrade 1.38 -> 1.39
      at-spi2-core:upgrade 2.36.0 -> 2.36.1

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I5542f5eea751a2641342e945725fd687cd74bebe
diff --git a/poky/documentation/ref-manual/ref-tasks.rst b/poky/documentation/ref-manual/ref-tasks.rst
new file mode 100644
index 0000000..dcdff05
--- /dev/null
+++ b/poky/documentation/ref-manual/ref-tasks.rst
@@ -0,0 +1,875 @@
+.. SPDX-License-Identifier: CC-BY-2.0-UK
+
+*****
+Tasks
+*****
+
+Tasks are units of execution for BitBake. Recipes (``.bb`` files) use
+tasks to complete configuring, compiling, and packaging software. This
+chapter provides a reference of the tasks defined in the OpenEmbedded
+build system.
+
+Normal Recipe Build Tasks
+=========================
+
+The following sections describe normal tasks associated with building a
+recipe. For more information on tasks and dependencies, see the
+":ref:`Tasks <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:tasks>`" and
+":ref:`Dependencies <bitbake:bitbake-user-manual/bitbake-user-manual-execution:dependencies>`" sections in the
+BitBake User Manual.
+
+.. _ref-tasks-build:
+
+``do_build``
+------------
+
+The default task for all recipes. This task depends on all other normal
+tasks required to build a recipe.
+
+.. _ref-tasks-compile:
+
+``do_compile``
+--------------
+
+Compiles the source code. This task runs with the current working
+directory set to ``${``\ :term:`B`\ ``}``.
+
+The default behavior of this task is to run the ``oe_runmake`` function
+if a makefile (``Makefile``, ``makefile``, or ``GNUmakefile``) is found.
+If no such file is found, the ``do_compile`` task does nothing.
+
+.. _ref-tasks-compile_ptest_base:
+
+``do_compile_ptest_base``
+-------------------------
+
+Compiles the runtime test suite included in the software being built.
+
+.. _ref-tasks-configure:
+
+``do_configure``
+----------------
+
+Configures the source by enabling and disabling any build-time and
+configuration options for the software being built. The task runs with
+the current working directory set to ``${``\ :term:`B`\ ``}``.
+
+The default behavior of this task is to run ``oe_runmake clean`` if a
+makefile (``Makefile``, ``makefile``, or ``GNUmakefile``) is found and
+:term:`CLEANBROKEN` is not set to "1". If no such
+file is found or the ``CLEANBROKEN`` variable is set to "1", the
+``do_configure`` task does nothing.
+
+.. _ref-tasks-configure_ptest_base:
+
+``do_configure_ptest_base``
+---------------------------
+
+Configures the runtime test suite included in the software being built.
+
+.. _ref-tasks-deploy:
+
+``do_deploy``
+-------------
+
+Writes output files that are to be deployed to
+``${``\ :term:`DEPLOY_DIR_IMAGE`\ ``}``. The
+task runs with the current working directory set to
+``${``\ :term:`B`\ ``}``.
+
+Recipes implementing this task should inherit the
+:ref:`deploy <ref-classes-deploy>` class and should write the output
+to ``${``\ :term:`DEPLOYDIR`\ ``}``, which is not to be
+confused with ``${DEPLOY_DIR}``. The ``deploy`` class sets up
+``do_deploy`` as a shared state (sstate) task that can be accelerated
+through sstate use. The sstate mechanism takes care of copying the
+output from ``${DEPLOYDIR}`` to ``${DEPLOY_DIR_IMAGE}``.
+
+.. note::
+
+   Do not write the output directly to
+   ${DEPLOY_DIR_IMAGE}
+   , as this causes the sstate mechanism to malfunction.
+
+The ``do_deploy`` task is not added as a task by default and
+consequently needs to be added manually. If you want the task to run
+after :ref:`ref-tasks-compile`, you can add it by doing
+the following: addtask deploy after do_compile Adding ``do_deploy``
+after other tasks works the same way.
+
+.. note::
+
+   You do not need to add
+   before do_build
+   to the
+   addtask
+   command (though it is harmless), because the
+   base
+   class contains the following:
+   ::
+
+           do_build[recrdeptask] += "do_deploy"
+
+
+   See the "
+   Dependencies
+   " section in the BitBake User Manual for more information.
+
+If the ``do_deploy`` task re-executes, any previous output is removed
+(i.e. "cleaned").
+
+.. _ref-tasks-fetch:
+
+``do_fetch``
+------------
+
+Fetches the source code. This task uses the
+:term:`SRC_URI` variable and the argument's prefix to
+determine the correct :ref:`fetcher <bitbake:bb-fetchers>`
+module.
+
+.. _ref-tasks-image:
+
+``do_image``
+------------
+
+Starts the image generation process. The ``do_image`` task runs after
+the OpenEmbedded build system has run the
+:ref:`ref-tasks-rootfs` task during which packages are
+identified for installation into the image and the root filesystem is
+created, complete with post-processing.
+
+The ``do_image`` task performs pre-processing on the image through the
+:term:`IMAGE_PREPROCESS_COMMAND` and
+dynamically generates supporting ``do_image_*`` tasks as needed.
+
+For more information on image creation, see the ":ref:`image-generation-dev-environment`"
+section in the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-image-complete:
+
+``do_image_complete``
+---------------------
+
+Completes the image generation process. The ``do_image_complete`` task
+runs after the OpenEmbedded build system has run the
+:ref:`ref-tasks-image` task during which image
+pre-processing occurs and through dynamically generated ``do_image_*``
+tasks the image is constructed.
+
+The ``do_image_complete`` task performs post-processing on the image
+through the
+:term:`IMAGE_POSTPROCESS_COMMAND`.
+
+For more information on image creation, see the
+":ref:`image-generation-dev-environment`"
+section in the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-install:
+
+``do_install``
+--------------
+
+Copies files that are to be packaged into the holding area
+``${``\ :term:`D`\ ``}``. This task runs with the current
+working directory set to ``${``\ :term:`B`\ ``}``, which is the
+compilation directory. The ``do_install`` task, as well as other tasks
+that either directly or indirectly depend on the installed files (e.g.
+:ref:`ref-tasks-package`, ``do_package_write_*``, and
+:ref:`ref-tasks-rootfs`), run under
+:ref:`fakeroot <overview-manual/overview-manual-concepts:fakeroot and pseudo>`.
+
+.. note::
+
+   When installing files, be careful not to set the owner and group IDs
+   of the installed files to unintended values. Some methods of copying
+   files, notably when using the recursive ``cp`` command, can preserve
+   the UID and/or GID of the original file, which is usually not what
+   you want. The ``host-user-contaminated`` QA check checks for files
+   that probably have the wrong ownership.
+
+   Safe methods for installing files include the following:
+
+   -  The ``install`` utility. This utility is the preferred method.
+
+   -  The ``cp`` command with the "--no-preserve=ownership" option.
+
+   -  The ``tar`` command with the "--no-same-owner" option. See the
+      ``bin_package.bbclass`` file in the ``meta/classes`` directory of
+      the :term:`Source Directory` for an example.
+
+.. _ref-tasks-install_ptest_base:
+
+``do_install_ptest_base``
+-------------------------
+
+Copies the runtime test suite files from the compilation directory to a
+holding area.
+
+.. _ref-tasks-package:
+
+``do_package``
+--------------
+
+Analyzes the content of the holding area
+``${``\ :term:`D`\ ``}`` and splits the content into subsets
+based on available packages and files. This task makes use of the
+:term:`PACKAGES` and :term:`FILES`
+variables.
+
+The ``do_package`` task, in conjunction with the
+:ref:`ref-tasks-packagedata` task, also saves some
+important package metadata. For additional information, see the
+:term:`PKGDESTWORK` variable and the
+":ref:`overview-manual/overview-manual-concepts:automatically added runtime dependencies`"
+section in the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_qa:
+
+``do_package_qa``
+-----------------
+
+Runs QA checks on packaged files. For more information on these checks,
+see the :ref:`insane <ref-classes-insane>` class.
+
+.. _ref-tasks-package_write_deb:
+
+``do_package_write_deb``
+------------------------
+
+Creates Debian packages (i.e. ``*.deb`` files) and places them in the
+``${``\ :term:`DEPLOY_DIR_DEB`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`package-feeds-dev-environment`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_write_ipk:
+
+``do_package_write_ipk``
+------------------------
+
+Creates IPK packages (i.e. ``*.ipk`` files) and places them in the
+``${``\ :term:`DEPLOY_DIR_IPK`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`package-feeds-dev-environment`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_write_rpm:
+
+``do_package_write_rpm``
+------------------------
+
+Creates RPM packages (i.e. ``*.rpm`` files) and places them in the
+``${``\ :term:`DEPLOY_DIR_RPM`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`package-feeds-dev-environment`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-package_write_tar:
+
+``do_package_write_tar``
+------------------------
+
+Creates tarballs and places them in the
+``${``\ :term:`DEPLOY_DIR_TAR`\ ``}`` directory in
+the package feeds area. For more information, see the
+":ref:`package-feeds-dev-environment`" section in
+the Yocto Project Overview and Concepts Manual.
+
+.. _ref-tasks-packagedata:
+
+``do_packagedata``
+------------------
+
+Saves package metadata generated by the
+:ref:`ref-tasks-package` task in
+:term:`PKGDATA_DIR` to make it available globally.
+
+.. _ref-tasks-patch:
+
+``do_patch``
+------------
+
+Locates patch files and applies them to the source code.
+
+After fetching and unpacking source files, the build system uses the
+recipe's :term:`SRC_URI` statements
+to locate and apply patch files to the source code.
+
+.. note::
+
+   The build system uses the
+   FILESPATH
+   variable to determine the default set of directories when searching
+   for patches.
+
+Patch files, by default, are ``*.patch`` and ``*.diff`` files created
+and kept in a subdirectory of the directory holding the recipe file. For
+example, consider the
+:yocto_git:`bluez5 </cgit/cgit.cgi/poky/tree/meta/recipes-connectivity/bluez5>`
+recipe from the OE-Core layer (i.e. ``poky/meta``):
+::
+
+   poky/meta/recipes-connectivity/bluez5
+
+This recipe has two patch files located here:
+::
+
+   poky/meta/recipes-connectivity/bluez5/bluez5
+
+In the ``bluez5`` recipe, the ``SRC_URI`` statements point to the source
+and patch files needed to build the package.
+
+.. note::
+
+   In the case for the
+   bluez5_5.48.bb
+   recipe, the
+   SRC_URI
+   statements are from an include file
+   bluez5.inc
+   .
+
+As mentioned earlier, the build system treats files whose file types are
+``.patch`` and ``.diff`` as patch files. However, you can use the
+"apply=yes" parameter with the ``SRC_URI`` statement to indicate any
+file as a patch file:
+::
+
+   SRC_URI = " \\
+       git://path_to_repo/some_package \\
+       file://file;apply=yes \\
+       "
+
+Conversely, if you have a directory full of patch files and you want to
+exclude some so that the ``do_patch`` task does not apply them during
+the patch phase, you can use the "apply=no" parameter with the
+``SRC_URI`` statement:
+::
+
+   SRC_URI = " \
+       git://path_to_repo/some_package \
+       file://path_to_lots_of_patch_files \
+       file://path_to_lots_of_patch_files/patch_file5;apply=no \
+       "
+
+In the
+previous example, assuming all the files in the directory holding the
+patch files end with either ``.patch`` or ``.diff``, every file would be
+applied as a patch by default except for the patch_file5 patch.
+
+You can find out more about the patching process in the
+":ref:`patching-dev-environment`" section in
+the Yocto Project Overview and Concepts Manual and the
+":ref:`new-recipe-patching-code`" section in the
+Yocto Project Development Tasks Manual.
+
+.. _ref-tasks-populate_lic:
+
+``do_populate_lic``
+-------------------
+
+Writes license information for the recipe that is collected later when
+the image is constructed.
+
+.. _ref-tasks-populate_sdk:
+
+``do_populate_sdk``
+-------------------
+
+Creates the file and directory structure for an installable SDK. See the
+":ref:`sdk-generation-dev-environment`"
+section in the Yocto Project Overview and Concepts Manual for more
+information.
+
+.. _ref-tasks-populate_sdk_ext:
+
+``do_populate_sdk_ext``
+-----------------------
+
+Creates the file and directory structure for an installable extensible 
+SDK (eSDK). See the ":ref:`sdk-generation-dev-environment`"
+section in the Yocto Project Overview and Concepts Manual for more
+information.
+
+
+.. _ref-tasks-populate_sysroot:
+
+``do_populate_sysroot``
+-----------------------
+
+Stages (copies) a subset of the files installed by the
+:ref:`ref-tasks-install` task into the appropriate
+sysroot. For information on how to access these files from other
+recipes, see the :term:`STAGING_DIR* <STAGING_DIR_HOST>` variables.
+Directories that would typically not be needed by other recipes at build
+time (e.g. ``/etc``) are not copied by default.
+
+For information on what directories are copied by default, see the
+:term:`SYSROOT_DIRS* <SYSROOT_DIRS>` variables. You can change
+these variables inside your recipe if you need to make additional (or
+fewer) directories available to other recipes at build time.
+
+The ``do_populate_sysroot`` task is a shared state (sstate) task, which
+means that the task can be accelerated through sstate use. Realize also
+that if the task is re-executed, any previous output is removed (i.e.
+"cleaned").
+
+.. _ref-tasks-prepare_recipe_sysroot:
+
+``do_prepare_recipe_sysroot``
+-----------------------------
+
+Installs the files into the individual recipe specific sysroots (i.e.
+``recipe-sysroot`` and ``recipe-sysroot-native`` under
+``${``\ :term:`WORKDIR`\ ``}`` based upon the
+dependencies specified by :term:`DEPENDS`). See the
+":ref:`staging <ref-classes-staging>`" class for more information.
+
+.. _ref-tasks-rm_work:
+
+``do_rm_work``
+--------------
+
+Removes work files after the OpenEmbedded build system has finished with
+them. You can learn more by looking at the
+":ref:`rm_work.bbclass <ref-classes-rm-work>`" section.
+
+.. _ref-tasks-unpack:
+
+``do_unpack``
+-------------
+
+Unpacks the source code into a working directory pointed to by
+``${``\ :term:`WORKDIR`\ ``}``. The :term:`S`
+variable also plays a role in where unpacked source files ultimately
+reside. For more information on how source files are unpacked, see the
+":ref:`source-fetching-dev-environment`"
+section in the Yocto Project Overview and Concepts Manual and also see
+the ``WORKDIR`` and ``S`` variable descriptions.
+
+Manually Called Tasks
+=====================
+
+These tasks are typically manually triggered (e.g. by using the
+``bitbake -c`` command-line option):
+
+.. _ref-tasks-checkpkg:
+
+``do_checkpkg``
+---------------
+
+Provides information about the recipe including its upstream version and
+status. The upstream version and status reveals whether or not a version
+of the recipe exists upstream and a status of not updated, updated, or
+unknown.
+
+To check the upstream version and status of a recipe, use the following
+devtool commands:
+::
+
+   $ devtool latest-version
+   $ devtool check-upgrade-status
+
+See the ":ref:`ref-manual/ref-devtool-reference:\`\`devtool\`\` quick reference`"
+chapter for more information on
+``devtool``. See the ":ref:`devtool-checking-on-the-upgrade-status-of-a-recipe`"
+section for information on checking the upgrade status of a recipe.
+
+To build the ``checkpkg`` task, use the ``bitbake`` command with the
+"-c" option and task name:
+::
+
+   $ bitbake core-image-minimal -c checkpkg
+
+By default, the results are stored in :term:`$LOG_DIR <LOG_DIR>` (e.g.
+``$BUILD_DIR/tmp/log``).
+
+.. _ref-tasks-checkuri:
+
+``do_checkuri``
+---------------
+
+Validates the :term:`SRC_URI` value.
+
+.. _ref-tasks-clean:
+
+``do_clean``
+------------
+
+Removes all output files for a target from the
+:ref:`ref-tasks-unpack` task forward (i.e. ``do_unpack``,
+:ref:`ref-tasks-configure`,
+:ref:`ref-tasks-compile`,
+:ref:`ref-tasks-install`, and
+:ref:`ref-tasks-package`).
+
+You can run this task using BitBake as follows:
+::
+
+   $ bitbake -c clean recipe
+
+Running this task does not remove the
+:ref:`sstate <overview-manual/overview-manual-concepts:shared state cache>` cache files.
+Consequently, if no changes have been made and the recipe is rebuilt
+after cleaning, output files are simply restored from the sstate cache.
+If you want to remove the sstate cache files for the recipe, you need to
+use the :ref:`ref-tasks-cleansstate` task instead
+(i.e. ``bitbake -c cleansstate`` recipe).
+
+.. _ref-tasks-cleanall:
+
+``do_cleanall``
+---------------
+
+Removes all output files, shared state
+(:ref:`sstate <overview-manual/overview-manual-concepts:shared state cache>`) cache, and
+downloaded source files for a target (i.e. the contents of
+:term:`DL_DIR`). Essentially, the ``do_cleanall`` task is
+identical to the :ref:`ref-tasks-cleansstate` task
+with the added removal of downloaded source files.
+
+You can run this task using BitBake as follows:
+::
+
+   $ bitbake -c cleanall recipe
+
+Typically, you would not normally use the ``cleanall`` task. Do so only
+if you want to start fresh with the :ref:`ref-tasks-fetch`
+task.
+
+.. _ref-tasks-cleansstate:
+
+``do_cleansstate``
+------------------
+
+Removes all output files and shared state
+(:ref:`sstate <overview-manual/overview-manual-concepts:shared state cache>`) cache for a
+target. Essentially, the ``do_cleansstate`` task is identical to the
+:ref:`ref-tasks-clean` task with the added removal of
+shared state (`:ref:`sstate <overview-manual/overview-manual-concepts:shared state cache>`)
+cache.
+
+You can run this task using BitBake as follows:
+::
+
+   $ bitbake -c cleansstate recipe
+
+When you run the ``do_cleansstate`` task, the OpenEmbedded build system
+no longer uses any sstate. Consequently, building the recipe from
+scratch is guaranteed.
+
+.. note::
+
+   The
+   do_cleansstate
+   task cannot remove sstate from a remote sstate mirror. If you need to
+   build a target from scratch using remote mirrors, use the "-f" option
+   as follows:
+   ::
+
+      $ bitbake -f -c do_cleansstate target
+
+
+.. _ref-tasks-devpyshell:
+
+``do_devpyshell``
+-----------------
+
+Starts a shell in which an interactive Python interpreter allows you to
+interact with the BitBake build environment. From within this shell, you
+can directly examine and set bits from the data store and execute
+functions as if within the BitBake environment. See the ":ref:`platdev-appdev-devpyshell`" section in
+the Yocto Project Development Tasks Manual for more information about
+using ``devpyshell``.
+
+.. _ref-tasks-devshell:
+
+``do_devshell``
+---------------
+
+Starts a shell whose environment is set up for development, debugging,
+or both. See the ":ref:`platdev-appdev-devshell`" section in the
+Yocto Project Development Tasks Manual for more information about using
+``devshell``.
+
+.. _ref-tasks-listtasks:
+
+``do_listtasks``
+----------------
+
+Lists all defined tasks for a target.
+
+.. _ref-tasks-package_index:
+
+``do_package_index``
+--------------------
+
+Creates or updates the index in the `:ref:`package-feeds-dev-environment` area.
+
+.. note::
+
+   This task is not triggered with the
+   bitbake -c
+   command-line option as are the other tasks in this section. Because
+   this task is specifically for the
+   package-index
+   recipe, you run it using
+   bitbake package-index
+   .
+
+Image-Related Tasks
+===================
+
+The following tasks are applicable to image recipes.
+
+.. _ref-tasks-bootimg:
+
+``do_bootimg``
+--------------
+
+Creates a bootable live image. See the
+:term:`IMAGE_FSTYPES` variable for additional
+information on live image types.
+
+.. _ref-tasks-bundle_initramfs:
+
+``do_bundle_initramfs``
+-----------------------
+
+Combines an initial RAM disk (initramfs) image and kernel together to
+form a single image. The
+:term:`CONFIG_INITRAMFS_SOURCE` variable
+has some more information about these types of images.
+
+.. _ref-tasks-rootfs:
+
+``do_rootfs``
+-------------
+
+Creates the root filesystem (file and directory structure) for an image.
+See the ":ref:`image-generation-dev-environment`"
+section in the Yocto Project Overview and Concepts Manual for more
+information on how the root filesystem is created.
+
+.. _ref-tasks-testimage:
+
+``do_testimage``
+----------------
+
+Boots an image and performs runtime tests within the image. For
+information on automatically testing images, see the
+":ref:`dev-manual/dev-manual-common-tasks:performing automated runtime testing`"
+section in the Yocto Project Development Tasks Manual.
+
+.. _ref-tasks-testimage_auto:
+
+``do_testimage_auto``
+---------------------
+
+Boots an image and performs runtime tests within the image immediately
+after it has been built. This task is enabled when you set
+:term:`TESTIMAGE_AUTO` equal to "1".
+
+For information on automatically testing images, see the
+":ref:`dev-manual/dev-manual-common-tasks:performing automated runtime testing`"
+section in the Yocto Project Development Tasks Manual.
+
+Kernel-Related Tasks
+====================
+
+The following tasks are applicable to kernel recipes. Some of these
+tasks (e.g. the :ref:`ref-tasks-menuconfig` task) are
+also applicable to recipes that use Linux kernel style configuration
+such as the BusyBox recipe.
+
+.. _ref-tasks-compile_kernelmodules:
+
+``do_compile_kernelmodules``
+----------------------------
+
+Runs the step that builds the kernel modules (if needed). Building a
+kernel consists of two steps: 1) the kernel (``vmlinux``) is built, and
+2) the modules are built (i.e. ``make modules``).
+
+.. _ref-tasks-diffconfig:
+
+``do_diffconfig``
+-----------------
+
+When invoked by the user, this task creates a file containing the
+differences between the original config as produced by
+:ref:`ref-tasks-kernel_configme` task and the
+changes made by the user with other methods (i.e. using
+(:ref:`ref-tasks-kernel_menuconfig`). Once the
+file of differences is created, it can be used to create a config
+fragment that only contains the differences. You can invoke this task
+from the command line as follows:
+::
+
+   $ bitbake linux-yocto -c diffconfig
+
+For more information, see the
+":ref:`kernel-dev/kernel-dev-common:creating configuration fragments`"
+section in the Yocto Project Linux Kernel Development Manual.
+
+.. _ref-tasks-kernel_checkout:
+
+``do_kernel_checkout``
+----------------------
+
+Converts the newly unpacked kernel source into a form with which the
+OpenEmbedded build system can work. Because the kernel source can be
+fetched in several different ways, the ``do_kernel_checkout`` task makes
+sure that subsequent tasks are given a clean working tree copy of the
+kernel with the correct branches checked out.
+
+.. _ref-tasks-kernel_configcheck:
+
+``do_kernel_configcheck``
+-------------------------
+
+Validates the configuration produced by the
+:ref:`ref-tasks-kernel_menuconfig` task. The
+``do_kernel_configcheck`` task produces warnings when a requested
+configuration does not appear in the final ``.config`` file or when you
+override a policy configuration in a hardware configuration fragment.
+You can run this task explicitly and view the output by using the
+following command:
+::
+
+   $ bitbake linux-yocto -c kernel_configcheck -f
+
+For more information, see the
+":ref:`kernel-dev/kernel-dev-common:validating configuration`"
+section in the Yocto Project Linux Kernel Development Manual.
+
+.. _ref-tasks-kernel_configme:
+
+``do_kernel_configme``
+----------------------
+
+After the kernel is patched by the :ref:`ref-tasks-patch`
+task, the ``do_kernel_configme`` task assembles and merges all the
+kernel config fragments into a merged configuration that can then be
+passed to the kernel configuration phase proper. This is also the time
+during which user-specified defconfigs are applied if present, and where
+configuration modes such as ``--allnoconfig`` are applied.
+
+.. _ref-tasks-kernel_menuconfig:
+
+``do_kernel_menuconfig``
+------------------------
+
+Invoked by the user to manipulate the ``.config`` file used to build a
+linux-yocto recipe. This task starts the Linux kernel configuration
+tool, which you then use to modify the kernel configuration.
+
+.. note::
+
+   You can also invoke this tool from the command line as follows:
+   ::
+
+           $ bitbake linux-yocto -c menuconfig
+
+
+See the ":ref:`kernel-dev/kernel-dev-common:using \`\`menuconfig\`\``"
+section in the Yocto Project Linux Kernel Development Manual for more
+information on this configuration tool.
+
+.. _ref-tasks-kernel_metadata:
+
+``do_kernel_metadata``
+----------------------
+
+Collects all the features required for a given kernel build, whether the
+features come from :term:`SRC_URI` or from Git
+repositories. After collection, the ``do_kernel_metadata`` task
+processes the features into a series of config fragments and patches,
+which can then be applied by subsequent tasks such as
+:ref:`ref-tasks-patch` and
+:ref:`ref-tasks-kernel_configme`.
+
+.. _ref-tasks-menuconfig:
+
+``do_menuconfig``
+-----------------
+
+Runs ``make menuconfig`` for the kernel. For information on
+``menuconfig``, see the
+":ref:`kernel-dev/kernel-dev-common:using \`\`menuconfig\`\``"
+section in the Yocto Project Linux Kernel Development Manual.
+
+.. _ref-tasks-savedefconfig:
+
+``do_savedefconfig``
+--------------------
+
+When invoked by the user, creates a defconfig file that can be used
+instead of the default defconfig. The saved defconfig contains the
+differences between the default defconfig and the changes made by the
+user using other methods (i.e. the
+:ref:`ref-tasks-kernel_menuconfig` task. You
+can invoke the task using the following command:
+::
+
+   $ bitbake linux-yocto -c savedefconfig
+
+.. _ref-tasks-shared_workdir:
+
+``do_shared_workdir``
+---------------------
+
+After the kernel has been compiled but before the kernel modules have
+been compiled, this task copies files required for module builds and
+which are generated from the kernel build into the shared work
+directory. With these copies successfully copied, the
+:ref:`ref-tasks-compile_kernelmodules` task
+can successfully build the kernel modules in the next step of the build.
+
+.. _ref-tasks-sizecheck:
+
+``do_sizecheck``
+----------------
+
+After the kernel has been built, this task checks the size of the
+stripped kernel image against
+:term:`KERNEL_IMAGE_MAXSIZE`. If that
+variable was set and the size of the stripped kernel exceeds that size,
+the kernel build produces a warning to that effect.
+
+.. _ref-tasks-strip:
+
+``do_strip``
+------------
+
+If ``KERNEL_IMAGE_STRIP_EXTRA_SECTIONS`` is defined, this task strips
+the sections named in that variable from ``vmlinux``. This stripping is
+typically used to remove nonessential sections such as ``.comment``
+sections from a size-sensitive configuration.
+
+.. _ref-tasks-validate_branches:
+
+``do_validate_branches``
+------------------------
+
+After the kernel is unpacked but before it is patched, this task makes
+sure that the machine and metadata branches as specified by the
+:term:`SRCREV` variables actually exist on the specified
+branches. If these branches do not exist and
+:term:`AUTOREV` is not being used, the
+``do_validate_branches`` task fails during the build.
+
+Miscellaneous Tasks
+===================
+
+The following sections describe miscellaneous tasks.
+
+.. _ref-tasks-spdx:
+
+``do_spdx``
+-----------
+
+A build stage that takes the source code and scans it on a remote
+FOSSOLOGY server in order to produce an SPDX document. This task applies
+only to the :ref:`spdx <ref-classes-spdx>` class.