Gitiles
Code Review Sign In
gerrit.openbmc.org / stefanberger / openbmc / cd9ed7d92b2008c4fe3c49671aa082db23adda52
commitcd9ed7d92b2008c4fe3c49671aa082db23adda52[log] [tgz]
authorAndrew Geissler <geissonator@yahoo.com>Tue Oct 08 14:05:45 2019 -0500
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Thu Oct 10 11:13:26 2019 -0400
tree7ca89ec927a893d03995f66b06bd8a106dd64083
parentf76da5003a03ef7d361f05d121731c74fa732fda [diff]
Do not reload systemd when removing services

Testing has shown that reloading the systemd daemon during the execution
of the multi-user.target can cause intermittent failures. systemctl
itself has special code to handle the situation when it sends the
Reload command to the systemd daemon. It doubles the D-bus timeout and
it also expects a disconnect, not a reply to it's sd_bus_call().

There is no need to have systemd do a daemon-reload with these services.
The goal is to just prevent them from running during the next reboot of
the BMC in which case systemd will be reloading the services anyway.

(From meta-openpower rev: dc61895cbd6b269ed925fdb6266973a98f8a1d8e)

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ic9741234c9b0a4f7b1c020492a611da21f956d4f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2 files changed
tree: 7ca89ec927a893d03995f66b06bd8a106dd64083
  1. .github/
  2. meta-arm/
  3. meta-aspeed/
  4. meta-evb/
  5. meta-facebook/
  6. meta-google/
  7. meta-hxt/
  8. meta-ibm/
  9. meta-ingrasys/
  10. meta-inspur/
  11. meta-intel/
  12. meta-inventec/
  13. meta-lenovo/
  14. meta-mellanox/
  15. meta-microsoft/
  16. meta-nuvoton/
  17. meta-openembedded/
  18. meta-openpower/
  19. meta-phosphor/
  20. meta-portwell/
  21. meta-qualcomm/
  22. meta-quanta/
  23. meta-raspberrypi/
  24. meta-security/
  25. meta-x86/
  26. meta-xilinx/
  27. meta-yadro/
  28. poky/
  29. bitbake ⇨ poky/bitbake/
  30. LICENSE ⇨ poky/LICENSE
  31. meta ⇨ poky/meta
  32. meta-poky ⇨ poky/meta-poky/
  33. meta-skeleton ⇨ poky/meta-skeleton
  34. oe-init-build-env ⇨ poky/oe-init-build-env
  35. scripts ⇨ poky/scripts/
  36. .gitignore
  37. .gitreview
  38. .templateconf
  39. MAINTAINERS
  40. openbmc-env
  41. README.md
  42. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 28
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \
    rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. You can see all of the known targets with find meta-* -name local.conf.sample. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-ibm/meta-palmetto/conf
Zaiusmeta-ingrasys/meta-zaius/conf
Witherspoonmeta-ibm/meta-witherspoon/conf
Romulusmeta-ibm/meta-romulus/conf

As an example target Palmetto

export TEMPLATECONF=meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing

Features In Progress

  • OpenCompute Redfish Compliance
  • User management
  • Virtual media
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Contact