subtree updates

meta-security: 93f2146211..7628a3e90b:
  Anton Antonov (3):
        Parsec-service: Update installation procedure
        Parsec-service: Fix arm32 build
        meta-parsec: Update Parsec runtime tests

  Armin Kuster (20):
        fscrypt: add distro_check on pam
        meta-security: move perl and python recipes to dynamic layers structure
        packagegroup-core-security: remove pkgs
        packagegroup-core-security: add perl pkgs grps
        packagegroup-core-security: add dynamic python pkgs
        arpwatch: add postfix to pkg config
        suricata: drop nfnetlink from pkg config
        packagegroup-core-security.bb: fix suricata inclusion
        layer.conf: fix up layer dependancies.
        ima-evm-utils: Update to 1.4
        aide: Update 01.17.4
        ossec-hids: update to 3.7.0
        suricata: update to 5.0.5
        samhain: update to 4.4.9
        tpm2-pkcs11: tpm2-pkcs11 module missing
        tpm2-tools: Add missing rdepends
        oeqa/cases/tpm2: fix and enhance test suite
        meta-parsec: Add pkg grps
        meta-parsec: add build image.
        oeqa: add parsec runtime tests

  Jeremy A. Puhlman (2):
        aide: Add depend on audit when audit is enabled.
        lib-perl: prefix man pages to avoid conflicting with base perl

  Josh Harley (1):
        Add EROFS support to dm-verity-img class

  Lei Maohui (1):
        layer.conf: Added BBFILES_DYNAMIC for dynamic-layers.

meta-openembedded: 77c2fda04e..a9e6d16e66:
  Alejandro Enedino Hernandez Samaniego (1):
        cryptsetup: Add luks2 configure options defaults

  Alex Kiernan (2):
        ulogd2: Add recipe
        libcoap: Add recipe

  Armin Kuster (13):
        meta-python-image: Fix build depends
        crda: move to a dynamic-layer for python
        cyrus-sasl: move from meta-networking to meta-oe
        netplan: move from meta-networking to meta-oe
        nvmetcli: move recipe to meta-oe
        packagegroup-meta-oe: update pkg group
        python3-ldap: move to meta-python
        packagegroup-meta-python.bb: update pkg group
        firewalld: move to dynamic meta-python layer
        packagegroup-meta-networking: update pkg group
        meta-networking: drop meta-python layer depends
        meta-gnome: fix layer depends.
        layer.conf: Post release codename changes

  Bartosz Golaszewski (19):
        python3-pyfanotify: new package
        python3-toolz: new package
        python3-cytoolz: new package
        python3-decouple: new package
        python3-eth-hash: new package
        python3-eth-typing: new package
        python3-eth-utils: new package
        python3-eth-keys: new package
        python3-eth-keyfile: new package
        python3-hexbytes: new package
        python3-rlp: new package
        python3-eth-rlp: new package
        python3-parsimonious: new package
        python3-eth-abi: new package
        python3-eth-account: new package
        python3-lru-dict: new package
        python3-web3: new package
        python3-inotify: new package
        speedtest-cli: drop the recipe

  Changqing Li (1):
        zabbix: upgrade 5.2.6 -> 6.0.4

  Chase Qi (1):
        kernel-selftest: install kselftest runner

  Claudius Heine (1):
        btrfsmaintenance: add recipe for btrfsmaintenance scripts

  Denys Dmytriyenko (2):
        devmem2: reinstate previous patches, removed by mistake
        devmem2: add support for different page sizes

  Diego Sueiro (1):
        bats: upgrade 1.6.0 -> 1.6.1

  Gianfranco (3):
        sdbus-c++-libsystemd: Bump SRCREV to last commit of 250-stable branch
        sdbus-c++: Bump version from 1.00 to 1.1.0
        libmtp: Add doxygen-native dependency in case documentation build is enabled in PACKAGECONFIG. This fixes a FTBFS due to missing dependency.

  Gianfranco Costamagna (1):
        vboxguestdrivers: upgrade 6.1.32 -> 6.1.34

  Jiaqing Zhao (2):
        openldap: Remove libgcrypt dependency
        openldap: Upgrade 2.5.9 -> 2.5.12

  Joerg Vehlow (1):
        jq: Fix typo OE_EXTRACONF -> EXTRA_OECONF

  Julien STEPHAN (1):
        libcamera: fix packaging

  Kai Kang (3):
        conntrack-tools: fix postinst script
        wxwidgets: enable to use private fonts
        python3-wxgtk4: backport patch to fix svg issue

  Khem Raj (12):
        ufw: Fix packaging errors found with ppc64
        libcereal: Enable for glibc/ppc
        mimic: Use special rateconv.c license
        makedumpfile: Use right TARGET for ppc32
        evince: Add dbus to depnedencies on non-x11 builds
        evolution-data-server: Do not pass --library-path to gir compiler
        python3-wxgtk4: Needs x11 for sip module
        zfs: Fix build on musl systems
        zfs: Disable on riscv32
        zfs: Disable on mips
        zfs: Make systemd and sysvinit into packageconfigs
        sdbus-c++: Link with libatomic on mips/ppc32

  Markus Volk (1):
        minidlna: fix obsolete license warning

  Martin Jansa (1):
        ostree: prevent ostree-native depending on target virtual/kernel to provide kernel-module-overlay

  Michael Opdenacker (1):
        devmem2: update SRC_URI according to redirect

  Mingli Yu (1):
        s-nail: Set VAL_MTA

  Nicolas Dechesne (1):
        imlib2: update SRC_URI

  Peter Kjellerstedt (1):
        libwebsockets: Avoid absolute paths in *.cmake files in the sysroot

  Portia (1):
        cpulimit: introduce support for this package

  Randy MacLeod (1):
        intel-speed-select: Add libnl dependency and extend CFLAGS

  Richard Neill (1):
        bats: Add patch to fix false-negatives caused by teardown code

  Ross Burton (1):
        Revert "python3-cbor2: upgrade 5.4.2 -> 5.4.3"

  Samuli Piippo (1):
        python3-qface: upgrade 2.0.7 -> 2.0.8

  Teresa Remmet (1):
        meta-networking: Add meta-python to BBFILES_DYNAMIC

  Vyacheslav Yurkov (1):
        polkit: add udisks2 rule

  Windel Bouwman (1):
        Add zfs recipe

  Xu Huan (17):
        python3-astroid: upgrade 2.11.2 -> 2.11.3
        python3-bitstruct: upgrade 8.14.0 -> 8.14.1
        python3-cachecontrol: upgrade 0.12.10 -> 0.12.11
        python3-engineio: upgrade 4.3.1 -> 4.3.2
        python3-flask-socketio: upgrade 5.1.1 -> 5.1.2
        python3-google-api-python-client: upgrade 2.43.0 -> 2.45.0
        python3-graphviz: upgrade 0.19.2 -> 0.20
        python3-cbor2: upgrade 5.4.2 -> 5.4.3
        python3-click: upgrade 8.1.2 -> 8.1.3
        python3-flask-login: upgrade 0.6.0 -> 0.6.1
        python3-flask: upgrade 2.1.1 -> 2.1.2
        python3-google-api-core: upgrade 2.7.1 -> 2.7.3
        python3-google-auth: upgrade 2.6.3 -> 2.6.6
        python3-mypy: upgrade 0.942 -> 0.950
        python3-pyalsaaudio: upgrade 0.9.0 -> 0.9.2
        python3-grpcio-tools: upgrade 1.45.0 -> 1.46.0
        python3-pychromecast: upgrade 11.0.0 -> 12.1.1

  Yi Zhao (1):
        networkmanager: fix parallel build failure

  wangmy (41):
        python3-sentry-sdk: upgrade 1.5.8 -> 1.5.10
        python3-socketio: upgrade 5.5.2 -> 5.6.0
        python3-textparser: upgrade 0.23.0 -> 0.24.0
        python3-twisted: upgrade 22.2.0 -> 22.4.0
        python3-websockets: upgrade 10.2 -> 10.3
        fuse3: upgrade 3.10.5 -> 3.11.0
        zenity: upgrade 3.42.0 -> 3.42.1
        babeld: upgrade 1.11 -> 1.12
        cifs-utils: upgrade 6.14 -> 6.15
        nbdkit: upgrade 1.31.1 -> 1.31.2
        stunnel: upgrade 5.63 -> 5.64
        tgt: upgrade 1.0.79 -> 1.0.82
        wolfssl: upgrade 5.2.0 -> 5.3.0
        ctags: upgrade 5.9.20220417.0 -> 5.9.20220501.0
        freerdp: upgrade 2.6.1 -> 2.7.0
        fwupd-efi: upgrade 1.2 -> 1.3
        htop: upgrade 3.1.2 -> 3.2.0
        hwdata: upgrade 0.358 -> 0.359
        icewm: upgrade 2.9.6 -> 2.9.7
        iwd: upgrade 1.26 -> 1.27
        jemalloc: upgrade 5.2.1 -> 5.3.0
        libmbim: upgrade 1.26.2 -> 1.26.4
        libyang: upgrade 2.0.164 -> 2.0.194
        nano: upgrade 6.2 -> 6.3
        phoronix-test-suite: upgrade 10.8.2 -> 10.8.3
        php: upgrade 8.1.4 -> 8.1.5
        pkcs11-helper: upgrade 1.28.0 -> 1.29.0
        poppler: upgrade 22.04.0 -> 22.05.0
        toybox: upgrade 0.8.6 -> 0.8.7
        unixodbc: upgrade 2.3.9 -> 2.3.11
        xmlsec1: upgrade 1.2.33 -> 1.2.34
        gtk4: upgrade 4.6.3 -> 4.6.4
        nbdkit: upgrade 1.31.2 -> 1.31.5
        ctags: upgrade 5.9.20220501.0 -> 5.9.20220508.0
        openjpeg: upgrade 2.4.0 -> 2.5.0
        php: upgrade 8.1.5 -> 8.1.6
        postgresql: upgrade 14.2 -> 14.3
        phpmyadmin: upgrade 5.1.3 -> 5.2.0
        python3-aiohue: upgrade 3.0.11 -> 4.4.1
        python3-awesomeversion : add recipe
        python3-traitlets: upgrade 5.1.1 -> 5.2.0

  zhengrq.fnst (12):
        glibmm-2.68: upgrade 2.70.0 -> 2.72.1
        gnome-text-editor: upgrade 42.0 -> 42.1
        apitrace: upgrade 10.0 -> 11.0
        libconfig-general-perl: upgrade 2.63 -> 2.65
        gpsd: upgrade 3.23.1 -> 3.24
        mbw: upgrade 1.4 -> 1.5
        gtk4: upgrade 4.6.2 -> 4.6.3
        python3-antlr4-runtime: upgrade 4.9.2 -> 4.10
        python3-booleanpy: upgrade 3.8 -> 4.0
        python3-pika: upgrade 1.2.0 -> 1.2.1
        python3-autobahn: upgrade 22.3.2 -> 22.4.2
        python3-bitarray: upgrade 2.4.1 -> 2.5.0

  zhengruoqin (7):
        python3-imageio: upgrade 2.17.0 -> 2.18.0
        python3-langtable: upgrade 0.0.57 -> 0.0.58
        python3-paramiko: upgrade 2.10.3 -> 2.10.4
        python3-protobuf: upgrade 3.20.0 -> 3.20.1
        python3-pylint: upgrade 2.13.5 -> 2.13.7
        python3-pymongo: upgrade 4.1.0 -> 4.1.1
        python3-regex: upgrade 2022.3.15 -> 2022.4.24

poky: 9e55696042..13d70e57f8:
  Alex Kiernan (7):
        eudev: Upgrade 3.2.10 -> 3.2.11
        eudev: Add PACKAGECONFIG for manpages & selinux
        pypi.bbclass: Set CVE_PRODUCT to PYPI_PACKAGE
        openssh: Add openssh-sftp-server to openssh RDEPENDS
        eudev: Convert dependencies to PACKAGECONFIG
        eudev: Cleanup redundant configuration
        eudev: Use PACKAGE_BEFORE_PN/${PN}, clean up spaces

  Alexander Kanavin (106):
        systemd: upgrade 250.4 -> 250.5
        python3-cryptography: upgrade 36.0.2 -> 37.0.1
        util-linux: upgrade 2.37.4 -> 2.38
        vulkan: upgrade 1.3.204.1 -> 1.3.211.0
        libnl: upgrade 3.5.0 -> 3.6.0
        libsdl2: upgrade 2.0.20 -> 2.0.22
        mesa: upgrade 22.0.0 -> 22.0.2
        python3-babel: upgrade 2.9.1 -> 2.10.1
        python3-mako: upgrade 1.1.6 -> 1.2.0
        python3-pygments: upgrade 2.11.2 -> 2.12.0
        at-spi2-core: upgrade 2.44.0 -> 2.44.1
        bind: upgrade 9.18.1 -> 9.18.2
        cronie: upgrade 1.6.0 -> 1.6.1
        diffoscope: upgrade 208 -> 211
        dnf: upgrade 4.11.1 -> 4.12.0
        ell: upgrade 0.49 -> 0.50
        epiphany: upgrade 42.0 -> 42.2
        ffmpeg: upgrade 5.0 -> 5.0.1
        fribidi: upgrade 1.0.11 -> 1.0.12
        harfbuzz: upgrade 4.2.0 -> 4.2.1
        libinput: upgrade 1.19.3 -> 1.19.4
        libmnl: upgrade 1.0.4 -> 1.0.5
        libnotify: upgrade 0.7.9 -> 0.7.11
        libpipeline: upgrade 1.5.5 -> 1.5.6
        libseccomp: upgrade 2.5.3 -> 2.5.4
        libx11: upgrade 1.7.5 -> 1.8
        lttng-tools: upgrade 2.13.4 -> 2.13.7
        mmc-utils: upgrade to latest revision
        neard: upgrade 0.16 -> 0.18
        pango: upgrade 1.50.6 -> 1.50.7
        parted: upgrade 3.4 -> 3.5
        piglit: upgrade to latest revision
        python3-cryptography-vectors: upgrade 36.0.2 -> 37.0.1
        python3-dtschema: upgrade 2022.1 -> 2022.4
        python3-hypothesis: upgrade 6.44.0 -> 6.46.0
        python3-jinja2: upgrade 3.1.1 -> 3.1.2
        python3-pygobject: upgrade 3.42.0 -> 3.42.1
        python3-pytest: upgrade 7.1.1 -> 7.1.2
        repo: upgrade 2.23 -> 2.24.1
        sqlite3: upgrade 3.38.2 -> 3.38.3
        vala: upgrade 0.56.0 -> 0.56.1
        vte: upgrade 0.66.2 -> 0.68.0
        webkitgtk: upgrade 2.36.0 -> 2.36.1
        xorgproto: upgrade 2021.5 -> 2022.1
        xwayland: upgrade 22.1.0 -> 22.1.1
        sysvinit: update 3.02 -> 3.04
        pciutils: update 3.7.0 -> 3.8.0
        elfutils: update 0.186 -> 0.187
        git: update 2.35.3 -> 2.36.0
        libdnf: update 0.66.0 -> 0.67.0
        llvm: update 14.0.1 -> 14.0.3
        rsync: update 3.2.3 -> 3.2.4
        lsof: update 4.94.0 -> 4.95.0
        libhandy: update 1.5.0 -> 1.6.2
        librsvg: update 2.54.0 -> 2.54.1
        xauth: update 1.1.1 -> 1.1.2
        gnupg: update 2.3.4 -> 2.3.6
        qemu: update 6.2.0 -> 7.0.0
        stress-ng: disable apparmor from the correct spot
        coreutils: update 9.0 -> 9.1
        python3-setuptools: upgrade 59.5.0 -> 62.3.1
        go: upgrade 1.18.1 -> 1.18.2
        iptables: upgrade 1.8.7 -> 1.8.8
        gnu-config: update to latest version
        u-boot: upgrade 2022.01 -> 2022.04
        python3-pip: update 22.0.4 -> 22.1
        libxcb: update 1.14 -> 1.15
        xcb-proto: upgrade 1.14.1 -> 1.15
        systemtap: update 4.6 -> 4.7
        vulkan-samples: update to latest revision
        curl: upgrade 7.83.0 -> 7.83.1
        diffoscope: upgrade 211 -> 212
        git: upgrade 2.36.0 -> 2.36.1
        gnutls: upgrade 3.7.4 -> 3.7.5
        gst-devtools: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-libav: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-omx: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-bad: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-base: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-good: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-ugly: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-python: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-rtsp-server: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-vaapi: upgrade 1.20.1 -> 1.20.2
        libcgroup: upgrade 2.0.1 -> 2.0.2
        libnotify: upgrade 0.7.11 -> 0.7.12
        librsvg: upgrade 2.54.1 -> 2.54.3
        mesa: upgrade 22.0.2 -> 22.0.3
        mobile-broadband-provider-info: upgrade 20220315 -> 20220511
        piglit: upgrade to latest revision
        psmisc: upgrade 23.4 -> 23.5
        python3-bcrypt: upgrade 3.2.0 -> 3.2.2
        python3-cryptography: upgrade 37.0.1 -> 37.0.2
        python3-cryptography-vectors: upgrade 37.0.1 -> 37.0.2
        python3-hypothesis: upgrade 6.46.0 -> 6.46.4
        python3-jsonschema: upgrade 4.4.0 -> 4.5.1
        python3-markdown: upgrade 3.3.6 -> 3.3.7
        python3-more-itertools: upgrade 8.12.0 -> 8.13.0
        python3-pbr: upgrade 5.8.1 -> 5.9.0
        python3-pyparsing: upgrade 3.0.8 -> 3.0.9
        repo: upgrade 2.24.1 -> 2.25
        sqlite3: upgrade 3.38.3 -> 3.38.5
        stress-ng: upgrade 0.14.00 -> 0.14.01
        python3-setuptools-rust: update 1.1.2 -> 1.3.0
        python3: use built-in distutils for ptest, rather than setuptools' 'fork'

  Andrej Valek (1):
        kernel: add missing path to search for debug files

  Arkadiusz Drabczyk (1):
        overview-manual: fix a forgotten link

  Aryaman Gupta (1):
        e2fsprogs: update upstream status

  Bruce Ashfield (23):
        linux-yocto/5.15: arm: poky-tiny cleanup and fixes
        linux-yocto/5.10: update to v5.10.110
        linux-yocto/5.10: base: enable kernel crypto userspace API
        linux-yocto/5.15: update to v5.15.33
        linux-yocto/5.15: base: enable kernel crypto userspace API
        linux-yocto/5.15: kasan: fix BUG: sleeping function called from invalid context
        linux-yocto/5.15: fix ppc boot
        linux-yocto/5.15: netfilter: conntrack: avoid useless indirection during conntrack destruction
        linux-yocto/5.10: update to v5.10.112
        linux-yocto/5.15: update to v5.15.35
        linux-yocto/5.15: Fix CVE-2022-28796
        linux-yocto: enable powerpc debug fragment
        linux-yocto/5.15: fix -standard kernel build issue
        linux-yocto/5.15: update to v5.15.36
        linux-yocto/5.15: fix qemuarm graphical boot
        strace: fix ptest failure in landlock
        yocto-bsps: update to v5.15.36
        yocto-bsps: update to v5.10.113
        linux-yocto/5.15: update to v5.15.37
        linux-yocto/5.10: update to v5.10.113
        linux-yocto/5.15: update to v5.15.38
        linux-yocto/5.10: update to v5.10.114
        lttng-modules: fix build against 5.18-rc7+

  Changqing Li (1):
        eudev: create static-nodes in init script

  Chanho Park (2):
        externalsrc.bbclass: support crate fetcher on externalsrc
        cargo_common.bbclass: enable bitbake vendoring for externalsrc

  Claudius Heine (3):
        classes: rootfs-postcommands: add skip option to overlayfs_qa_check
        overlayfs: add docs about skipping QA check & service dependencies
        wic: added fspassno parameter to partition

  Davide Gardenal (4):
        cve-check: add JSON format to summary output
        cve-check: fix symlinks where link and output path are equal
        rootfs-postcommands: fix symlinks where link and output path are equal
        openssl: minor security upgrade 3.0.2 -> 3.0.3

  Dmitry Baryshkov (3):
        linux-firmware: upgrade 20220411 -> 20220509
        linux-firmware: package new Qualcomm firmware
        image.bbclass: allow overriding dependency on virtual/kernel:do_deploy

  Felix Moessbauer (1):
        wic/plugins/rootfs: Fix permissions when splitting rootfs folders across partitions

  Gunjan Gupta (2):
        bitbake: fetch2/osc: Small fixes for osc fetcher
        bitbake: fetch2/osc: Add support to query latest revision

  Jacob Kroon (1):
        Revert "image.bbclass: allow overriding dependency on virtual/kernel:do_deploy"

  Jiaqing Zhao (5):
        libxml2: Upgrade 2.9.13 -> 2.9.14
        systemd: Drop 0001-test-parse-argument-Include-signal.h.patch
        systemd: Remove __compare_fn_t type in musl-specific patch
        systemd: Drop 0002-don-t-use-glibc-specific-qsort_r.patch
        systemd: Correct path returned in sd_path_lookup()

  Jon Mason (1):
        qemuarmv5: use arm-versatile-926ejs KMACHINE

  Kai Kang (1):
        wpa-supplicant: update config for gnutls

  Khem Raj (15):
        qemu: Add packageconfig for libbpf support
        linux-yocto: Enable powerpc-debug fragment for ppc64 LE
        musl: Upgrade to tip of trunk
        systemd: Fix build regression with latest update
        gcc: upgrade 11.3 -> 12.1
        libstd-rs: Forward port rust libc patches
        gdb: Upgrade to 12.1
        bash: build with bash_cv_getcwd_malloc=yes on musl too
        ovmf: Fix native build with gcc-12
        elfutils: Disable stringop-overflow warning for build host
        musl-locales: Switch SRC_URI to new location
        systemd: Drop redundant musl patches
        systemd: Document future actions needed for set of musl patches
        systemd: Drop 0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
        systemd: Update patch status

  Konrad Weihmann (1):
        linux-firmware: replace mkdir by install

  Kory Maincent (1):
        images_types: isolate the write of UBI configuration

  Leon Anavi (1):
        image_types/runqemu-addptable2image: Fix a minor typo

  Markus Volk (2):
        mesa.inc: package 00-radv-defaults.conf
        libsdl2: add PACKAGECONFIG for libusb1 and remove obsolete options

  Marta Rybczynska (3):
        cve-update-db-native: update the CVE database once a day only
        cve-update-db-native: let the user to drive the update interval
        cve-check: Fix report generation

  Martin Jansa (1):
        bitbake: osc: fix DeprecationWarning

  Michael Halstead (5):
        releases: update to include 3.1.16
        scripts/autobuilder-worker-prereq-tests: update to use yocto 4.0
        scripts/autobuilder-worker-prereq-tests: add additional limit testing
        releases: update to include 3.4.4
        releases: include 4.0.1

  Michael Opdenacker (12):
        MAINTAINERS.md: no more need for a prelink-cross maintainer
        dev-manual: further gdb usage simplifications
        doc/Makefile: fix epub and latexpdf targets
        manuals: fix name capitalization issues
        doc: standards for project and file names
        manuals: improve the width of diagrams
        manuals: improve documentation for TEMPLATECONF
        overview-manual: remove confusing and unnecessary paragraph about site.conf
        manuals: add quoting to references to bitbake.conf
        manuals: add missing space in appends
        manuals: add documentation for WKS_FILES
        migration guides: release notes for 3.4.3 and 3.4.4

  Mingli Yu (1):
        python3-cryptography: remove --benchmark-disable option

  Peter Kjellerstedt (4):
        base-passwd: Regenerate the patches
        base-passwd: Update to 3.5.52
        base-passwd: Update the status for two patches
        librsvg: Drop the dependency on libcroco

  Quentin Schulz (2):
        docs: set_versions.py: remove hardknott from active releases list
        docs: set_versions.py: show release name in switchers.js

  Raphael Teller (1):
        kernel.bbclass: Do not overwrite recipe's custom postinst

  Richard Purdie (25):
        bitbake: cookerdata: Change emphasis in error message to be clearer to users
        cairo: Add missing GPLv3 license checksum entry
        libgcrypt: Drop GPLv3 license after upstream changes
        base: Avoid circular references to our own scripts
        scripts: Make git intercept global
        scripts/git: Ensure we don't have circular references
        abi_version/sstate: Bump hashequiv and sstate versions due to git changes
        vim: Upgrade 8.2.4681 -> 8.2.4912
        package: Ensure we track whether PRSERV was active or not
        libgcrypt: Fix reproducibility issues in ptest
        liberror-perl: Update sstate/equiv versions to clean cache
        freetype: Upgrade 2.12.0 -> 2.12.1
        bitbake: fetch/git : Use cat as pager
        pciutils: Add make-native dependency
        sanity: Don't warn about make 4.2.1 for mint
        bitbake: build: Add clean_stamp API function to allow removal of task stamps
        staging: Fix rare sysroot corruption issue
        selftest/imagefeatures/overlayfs: Always append to DISTRO_FEATURES
        udev-extraconf/initrdscripts/parted: Rename mount.blacklist -> mount.ignorelist
        layer.conf: Don't use indirect help2man-native dependencies
        rust-common: Fix sstate signatures between arm hf and non-hf
        rust-common: Drop LLVM_TARGET and simplify
        rust-common: Fix native signature dependency issues
        scripts/patchreview: Add commit to stored json data
        scripts/patchreview: Make json output human parsable

  Robert Joslyn (1):
        powerpc: Remove invalid GLIBC_EXTRA_OECONF

  Roland Hieber (1):
        bitbake: cache: correctly handle file names containing colons

  Ross Burton (4):
        oeqa/selftest: add test for git working correctly inside pseudo
        Revert "bitbake.conf: mark all directories as safe for git to read"
        kernel-yocto.bbclass: say what SRC_URI entry is being dropped
        oeqa/selftest/cve_check: add tests for recipe and image reports

  Rouven Czerwinski (1):
        kbd: fix pam DISTRO_FEATURES check

  Samuli Piippo (1):
        binutils: Bump to latest 2.38 release branch

  Schmidt, Adriaan (1):
        bitbake: bitbake-diffsigs: break on first dependent task difference

  Simone Weiss (1):
        libgcrypt: Add ptest

  Steve Sakoman (2):
        virgl: skip headless test on alma 8.6
        python3: fix reproducibility issue with python3-core

  Sundeep KOKKONDA (3):
        dev-manual: improvements for gdbserver configuration
        rust-common: Ensure sstate signatures have correct dependencues for do_rust_gen_targets
        rust-common: Fix for target definitions returning 'NoneType' for arm

  Thomas Epperson (1):
        dev-manual: fix documentation for bmaptool usage

  Thomas Perrot (1):
        man-pages: add an alternative link name for crypt_r.3

  Tomasz Dziendzielski (1):
        bitbake: data: Do not depend on vardepvalueexclude flag

  Trevor Woerner (1):
        DISTRO_FEATURES: remove uclibc remnants

  Zoltán Böszörményi (2):
        npm.bbclass: Fix file permissions before opening it for writing
        npm.bbclass: Don't create /usr/lib/node symlink

  leimaohui (1):
        cve-check.bbclass: Added do_populate_sdk[recrdeptask].

  wangmy (1):
        librepo: upgrade 1.14.2 -> 1.14.3

meta-raspberrypi: c97a9e34ab..62a84833d9:
  Andrei Gherzan (1):
        Revert "kmod: Enable xz compression"

  Khem Raj (3):
        rpi-config: Add option to enable One-wire interface
        linux-firmware-rpidistro: Create brcmfmac43455-sdio.raspberrypi,4-model-b.bin symlink
        linux-raspberrypi: Upgrade to 5.15.38

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: If15534d7da5bfa78ef2224bb09ff1a8eb96a0e10
diff --git a/meta-openembedded/meta-oe/recipes-support/openldap/openldap_2.5.12.bb b/meta-openembedded/meta-oe/recipes-support/openldap/openldap_2.5.12.bb
new file mode 100644
index 0000000..e4475e5
--- /dev/null
+++ b/meta-openembedded/meta-oe/recipes-support/openldap/openldap_2.5.12.bb
@@ -0,0 +1,241 @@
+SUMMARY = "OpenLDAP Directory Service"
+DESCRIPTION = "OpenLDAP Software is an open source implementation of the Lightweight Directory Access Protocol."
+HOMEPAGE = "http://www.OpenLDAP.org/license.html"
+# The OpenLDAP Public License - see the HOMEPAGE - defines
+# the license.  www.openldap.org claims this is Open Source
+# (see http://www.openldap.org), the license appears to be
+# basically BSD.  opensource.org does not record this license
+# at present (so it is apparently not OSI certified).
+LICENSE = "OpenLDAP"
+LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=beceb5ac7100b6430640c61655b25c1f \
+                    file://LICENSE;md5=153d07ef052c4a37a8fac23bc6031972 \
+                    "
+SECTION = "libs"
+
+LDAP_VER = "${@'.'.join(d.getVar('PV').split('.')[0:2])}"
+
+SRC_URI = "http://www.openldap.org/software/download/OpenLDAP/openldap-release/${BP}.tgz \
+    file://use-urandom.patch \
+    file://initscript \
+    file://slapd.service \
+    file://remove-user-host-pwd-from-version.patch \
+    file://0001-ldif-filter-fix-parallel-build-failure.patch \
+    file://0001-build-top.mk-unset-STRIP_OPTS.patch \
+    file://0001-libraries-Makefile.in-ignore-the-mkdir-errors.patch \
+    file://0001-librewrite-include-ldap_pvt_thread.h-before-redefini.patch \
+"
+
+SRC_URI[sha256sum] = "d5086cbfc49597fa7d0670a429a9054552d441b16ee8b2435412797ab0e37b96"
+
+DEPENDS = "util-linux groff-native"
+
+inherit autotools-brokensep update-rc.d systemd pkgconfig
+
+# CV SETTINGS
+# Required to work round AC_FUNC_MEMCMP which gets the wrong answer
+# when cross compiling (should be in site?)
+EXTRA_OECONF += "ac_cv_func_memcmp_working=yes"
+
+# CONFIG DEFINITIONS
+# The following is necessary because it cannot be determined for a
+# cross compile automagically.  Select should yield fine on all OE
+# systems...
+EXTRA_OECONF += "--with-yielding-select=yes"
+# Shared libraries are nice...
+EXTRA_OECONF += "--enable-dynamic"
+
+PACKAGECONFIG ??= "asyncmeta gnutls modules \
+                   mdb ldap meta null passwd proxycache dnssrv \
+                   ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \
+"
+#--with-tls              with TLS/SSL support auto|openssl|gnutls [auto]
+PACKAGECONFIG[gnutls] = "--with-tls=gnutls,,gnutls"
+PACKAGECONFIG[openssl] = "--with-tls=openssl,,openssl"
+
+PACKAGECONFIG[sasl] = "--with-cyrus-sasl,--without-cyrus-sasl,cyrus-sasl"
+PACKAGECONFIG[modules] = "lt_cv_dlopen_self=yes --enable-modules,--disable-modules,libtool"
+PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6"
+
+# SLAPD options
+#
+# UNIX crypt(3) passwd support:
+EXTRA_OECONF += "--enable-crypt"
+
+# SLAPD BACKEND
+#
+# The backend must be set by the configuration.  This controls the
+# required database.
+#
+# Backends="asyncmeta dnssrv ldap mdb meta ndb null passwd perl relay sock sql wt"
+#
+# Note that multiple backends can be built.  The ldbm backend requires a
+# build-time choice of database API. To use the gdbm (or other) API the 
+# Berkely database module must be removed from the build.
+md = "${libexecdir}/openldap"
+#
+
+#--enable-asyncmeta    enable asyncmeta backend no|yes|mod no
+PACKAGECONFIG[asyncmeta] = "--enable-asyncmeta=mod,--enable-asyncmeta=no"
+
+#--enable-dnssrv       enable dnssrv backend no|yes|mod no
+PACKAGECONFIG[dnssrv] = "--enable-dnssrv=mod,--enable-dnssrv=no"
+
+#--enable-ldap         enable ldap backend no|yes|mod no
+PACKAGECONFIG[ldap] = "--enable-ldap=mod,--enable-ldap=no,"
+
+#--enable-mdb          enable mdb database backend no|yes|mod [yes]
+PACKAGECONFIG[mdb] = "--enable-mdb=yes,--enable-mdb=no,"
+
+#--enable-meta         enable metadirectory backend no|yes|mod no
+PACKAGECONFIG[meta] = "--enable-meta=mod,--enable-meta=no,"
+
+#--enable-ndb          enable MySQL NDB Cluster backend no|yes|mod [no]
+PACKAGECONFIG[ndb] = "--enable-ndb=mod,--enable-ndb=no,"
+
+#--enable-null         enable null backend no|yes|mod no
+PACKAGECONFIG[null] = "--enable-null=mod,--enable-null=no,"
+
+#--enable-passwd       enable passwd backend no|yes|mod no
+PACKAGECONFIG[passwd] = "--enable-passwd=mod,--enable-passwd=no,"
+
+#--enable-perl         enable perl backend no|yes|mod no
+#  This requires a loadable perl dynamic library, if enabled without
+#  doing something appropriate (building perl?) the build will pick
+#  up the build machine perl - not good (inherit perlnative?)
+PACKAGECONFIG[perl] = "--enable-perl=mod,--enable-perl=no,perl"
+
+#--enable-relay        enable relay backend no|yes|mod [yes]
+PACKAGECONFIG[relay] = "--enable-relay=mod,--enable-relay=no,"
+
+#--enable-sock         enable sock backend no|yes|mod [no]
+PACKAGECONFIG[sock] = "--enable-sock=mod,--enable-sock=no,"
+
+#--enable-sql          enable sql backend no|yes|mod no
+# sql requires some sql backend which provides sql.h, sqlite* provides
+# sqlite.h (which may be compatible but hasn't been tried.)
+PACKAGECONFIG[sql] = "--enable-sql=mod,--enable-sql=no,sqlite3"
+
+#--enable-wt           enable wt backend no|yes|mod no
+# back-wt is marked currently as experimental
+PACKAGECONFIG[wt] = "--enable-wt=mod,--enable-wt=no"
+
+#--enable-dyngroup     Dynamic Group overlay no|yes|mod no
+#  This is a demo, Proxy Cache defines init_module which conflicts with the
+#  same symbol in dyngroup
+PACKAGECONFIG[dyngroup] = "--enable-dyngroup=mod,--enable-dyngroup=no,"
+
+#--enable-proxycache   Proxy Cache overlay no|yes|mod no
+PACKAGECONFIG[proxycache] = "--enable-proxycache=mod,--enable-proxycache=no,"
+FILES:${PN}-overlay-proxycache = "${md}/pcache-*.so.*"
+PACKAGES += "${PN}-overlay-proxycache"
+
+# Append URANDOM_DEVICE='/dev/urandom' to CPPFLAGS:
+# This allows tls to obtain random bits from /dev/urandom, by default
+# it was disabled for cross-compiling.
+CPPFLAGS:append = " -D_GNU_SOURCE -DURANDOM_DEVICE=\'/dev/urandom\' -fPIC"
+
+LDFLAGS:append = " -pthread"
+
+do_configure() {
+    rm -f ${S}/libtool
+    aclocal
+    libtoolize --force --copy
+    gnu-configize
+    cp ${STAGING_DATADIR_NATIVE}/libtool/build-aux/ltmain.sh ${S}/build
+    cp ${STAGING_DATADIR_NATIVE}/libtool/build-aux/missing ${S}/build
+    cp ${STAGING_DATADIR_NATIVE}/libtool/build-aux/compile ${S}/build
+    autoconf
+    oe_runconf
+}
+
+LEAD_SONAME = "libldap-${LDAP_VER}.so.*"
+
+# The executables go in a separate package.  This allows the
+# installation of the libraries with no daemon support.
+# Each module also has its own package - see above.
+PACKAGES += "${PN}-slapd ${PN}-slurpd ${PN}-bin"
+
+# Package contents - shift most standard contents to -bin
+FILES:${PN} = "${libdir}/lib*.so.* ${sysconfdir}/openldap/ldap.* ${localstatedir}/${BPN}/data"
+FILES:${PN}-slapd = "${sysconfdir}/init.d ${libexecdir}/slapd ${sbindir} ${localstatedir}/run ${localstatedir}/volatile/run \
+    ${sysconfdir}/openldap/slapd.* ${sysconfdir}/openldap/schema \
+    ${sysconfdir}/openldap/DB_CONFIG.example ${systemd_unitdir}/system/*"
+FILES:${PN}-slurpd = "${libexecdir}/slurpd ${localstatedir}/openldap-slurp"
+FILES:${PN}-bin = "${bindir}"
+FILES:${PN}-dev = "${includedir} ${libdir}/lib*.so ${libdir}/*.la ${libexecdir}/openldap/*.a ${libexecdir}/openldap/*.la ${libexecdir}/openldap/*.so ${libdir}/pkgconfig/*.pc"
+FILES:${PN}-dbg += "${libexecdir}/openldap/.debug"
+
+do_install:append() {
+    install -d ${D}${sysconfdir}/init.d
+    cat ${WORKDIR}/initscript > ${D}${sysconfdir}/init.d/openldap
+    chmod 755 ${D}${sysconfdir}/init.d/openldap
+    # This is duplicated in /etc/openldap and is for slapd
+    rm -f ${D}${localstatedir}/openldap-data/DB_CONFIG.example
+
+    # Installing slapd under ${sbin} is more FHS and LSB compliance
+    mv ${D}${libexecdir}/slapd ${D}/${sbindir}/slapd
+    rmdir --ignore-fail-on-non-empty ${D}${libexecdir}
+    SLAPTOOLS="slapadd slapcat slapdn slapindex slappasswd slaptest slapauth slapacl slapschema slapmodify"
+    cd ${D}/${sbindir}/
+    rm -f ${SLAPTOOLS}
+    for i in ${SLAPTOOLS}; do ln -sf slapd $i; done
+
+    rmdir "${D}${localstatedir}/run"
+    rmdir --ignore-fail-on-non-empty "${D}${localstatedir}"
+
+    install -d ${D}${systemd_unitdir}/system/
+    install -m 0644 ${WORKDIR}/slapd.service ${D}${systemd_unitdir}/system/
+    sed -i -e 's,@SBINDIR@,${sbindir},g' ${D}${systemd_unitdir}/system/*.service
+
+    # Uses mdm as the database
+    #  and localstatedir as data directory ...
+    sed -e 's/# modulepath/modulepath/' \
+        -e 's/# moduleload\s*back_bdb.*/moduleload    back_mdb/' \
+        -e 's/database\s*bdb/database        mdb/' \
+        -e 's%^directory\s*.*%directory   ${localstatedir}/${BPN}/data/%' \
+        -i ${D}${sysconfdir}/openldap/slapd.conf
+
+    mkdir -p ${D}${localstatedir}/${BPN}/data
+}
+
+INITSCRIPT_PACKAGES = "${PN}-slapd"
+INITSCRIPT_NAME:${PN}-slapd = "openldap"
+INITSCRIPT_PARAMS:${PN}-slapd = "defaults"
+SYSTEMD_PACKAGES = "${PN}-slapd"
+SYSTEMD_SERVICE:${PN}-slapd = "slapd.service"
+SYSTEMD_AUTO_ENABLE:${PN}-slapd ?= "disable"
+
+PACKAGES_DYNAMIC += "^${PN}-backends.* ^${PN}-backend-.*"
+
+# The modules require their .so to be dynamicaly loaded
+INSANE_SKIP:${PN}-backend-asyncmeta  += "dev-so"
+INSANE_SKIP:${PN}-backend-dnssrv     += "dev-so"
+INSANE_SKIP:${PN}-backend-ldap       += "dev-so"
+INSANE_SKIP:${PN}-backend-meta       += "dev-so"
+INSANE_SKIP:${PN}-backend-mdb        += "dev-so"
+INSANE_SKIP:${PN}-backend-null       += "dev-so"
+INSANE_SKIP:${PN}-backend-passwd     += "dev-so"
+
+python populate_packages:prepend () {
+    backend_dir    = d.expand('${libexecdir}/openldap')
+    do_split_packages(d, backend_dir, r'back_([a-z]*)\.so$', 'openldap-backend-%s', 'OpenLDAP %s backend', prepend=True, extra_depends='', allow_links=True)
+    do_split_packages(d, backend_dir, r'back_([a-z]*)\-.*\.so\..*$', 'openldap-backend-%s', 'OpenLDAP %s backend', extra_depends='', allow_links=True)
+
+    metapkg = "${PN}-backends"
+    d.setVar('ALLOW_EMPTY:' + metapkg, "1")
+    d.setVar('FILES:' + metapkg, "")
+    metapkg_rdepends = []
+    packages = d.getVar('PACKAGES').split()
+    for pkg in packages[1:]:
+        if pkg.count("openldap-backend-") and not pkg in metapkg_rdepends and not pkg.count("-dev") and not pkg.count("-dbg") and not pkg.count("static") and not pkg.count("locale"):
+            metapkg_rdepends.append(pkg)
+    d.setVar('RDEPENDS:' + metapkg, ' '.join(metapkg_rdepends))
+    d.setVar('DESCRIPTION:' + metapkg, 'OpenLDAP backends meta package')
+    packages.append(metapkg)
+    d.setVar('PACKAGES', ' '.join(packages))
+}
+
+BBCLASSEXTEND = "native"
+
+# CVE-2015-3276 has no target code.
+CVE_CHECK_IGNORE += "CVE-2015-3276"