subtree updates

meta-security: 93f2146211..7628a3e90b:
  Anton Antonov (3):
        Parsec-service: Update installation procedure
        Parsec-service: Fix arm32 build
        meta-parsec: Update Parsec runtime tests

  Armin Kuster (20):
        fscrypt: add distro_check on pam
        meta-security: move perl and python recipes to dynamic layers structure
        packagegroup-core-security: remove pkgs
        packagegroup-core-security: add perl pkgs grps
        packagegroup-core-security: add dynamic python pkgs
        arpwatch: add postfix to pkg config
        suricata: drop nfnetlink from pkg config
        packagegroup-core-security.bb: fix suricata inclusion
        layer.conf: fix up layer dependancies.
        ima-evm-utils: Update to 1.4
        aide: Update 01.17.4
        ossec-hids: update to 3.7.0
        suricata: update to 5.0.5
        samhain: update to 4.4.9
        tpm2-pkcs11: tpm2-pkcs11 module missing
        tpm2-tools: Add missing rdepends
        oeqa/cases/tpm2: fix and enhance test suite
        meta-parsec: Add pkg grps
        meta-parsec: add build image.
        oeqa: add parsec runtime tests

  Jeremy A. Puhlman (2):
        aide: Add depend on audit when audit is enabled.
        lib-perl: prefix man pages to avoid conflicting with base perl

  Josh Harley (1):
        Add EROFS support to dm-verity-img class

  Lei Maohui (1):
        layer.conf: Added BBFILES_DYNAMIC for dynamic-layers.

meta-openembedded: 77c2fda04e..a9e6d16e66:
  Alejandro Enedino Hernandez Samaniego (1):
        cryptsetup: Add luks2 configure options defaults

  Alex Kiernan (2):
        ulogd2: Add recipe
        libcoap: Add recipe

  Armin Kuster (13):
        meta-python-image: Fix build depends
        crda: move to a dynamic-layer for python
        cyrus-sasl: move from meta-networking to meta-oe
        netplan: move from meta-networking to meta-oe
        nvmetcli: move recipe to meta-oe
        packagegroup-meta-oe: update pkg group
        python3-ldap: move to meta-python
        packagegroup-meta-python.bb: update pkg group
        firewalld: move to dynamic meta-python layer
        packagegroup-meta-networking: update pkg group
        meta-networking: drop meta-python layer depends
        meta-gnome: fix layer depends.
        layer.conf: Post release codename changes

  Bartosz Golaszewski (19):
        python3-pyfanotify: new package
        python3-toolz: new package
        python3-cytoolz: new package
        python3-decouple: new package
        python3-eth-hash: new package
        python3-eth-typing: new package
        python3-eth-utils: new package
        python3-eth-keys: new package
        python3-eth-keyfile: new package
        python3-hexbytes: new package
        python3-rlp: new package
        python3-eth-rlp: new package
        python3-parsimonious: new package
        python3-eth-abi: new package
        python3-eth-account: new package
        python3-lru-dict: new package
        python3-web3: new package
        python3-inotify: new package
        speedtest-cli: drop the recipe

  Changqing Li (1):
        zabbix: upgrade 5.2.6 -> 6.0.4

  Chase Qi (1):
        kernel-selftest: install kselftest runner

  Claudius Heine (1):
        btrfsmaintenance: add recipe for btrfsmaintenance scripts

  Denys Dmytriyenko (2):
        devmem2: reinstate previous patches, removed by mistake
        devmem2: add support for different page sizes

  Diego Sueiro (1):
        bats: upgrade 1.6.0 -> 1.6.1

  Gianfranco (3):
        sdbus-c++-libsystemd: Bump SRCREV to last commit of 250-stable branch
        sdbus-c++: Bump version from 1.00 to 1.1.0
        libmtp: Add doxygen-native dependency in case documentation build is enabled in PACKAGECONFIG. This fixes a FTBFS due to missing dependency.

  Gianfranco Costamagna (1):
        vboxguestdrivers: upgrade 6.1.32 -> 6.1.34

  Jiaqing Zhao (2):
        openldap: Remove libgcrypt dependency
        openldap: Upgrade 2.5.9 -> 2.5.12

  Joerg Vehlow (1):
        jq: Fix typo OE_EXTRACONF -> EXTRA_OECONF

  Julien STEPHAN (1):
        libcamera: fix packaging

  Kai Kang (3):
        conntrack-tools: fix postinst script
        wxwidgets: enable to use private fonts
        python3-wxgtk4: backport patch to fix svg issue

  Khem Raj (12):
        ufw: Fix packaging errors found with ppc64
        libcereal: Enable for glibc/ppc
        mimic: Use special rateconv.c license
        makedumpfile: Use right TARGET for ppc32
        evince: Add dbus to depnedencies on non-x11 builds
        evolution-data-server: Do not pass --library-path to gir compiler
        python3-wxgtk4: Needs x11 for sip module
        zfs: Fix build on musl systems
        zfs: Disable on riscv32
        zfs: Disable on mips
        zfs: Make systemd and sysvinit into packageconfigs
        sdbus-c++: Link with libatomic on mips/ppc32

  Markus Volk (1):
        minidlna: fix obsolete license warning

  Martin Jansa (1):
        ostree: prevent ostree-native depending on target virtual/kernel to provide kernel-module-overlay

  Michael Opdenacker (1):
        devmem2: update SRC_URI according to redirect

  Mingli Yu (1):
        s-nail: Set VAL_MTA

  Nicolas Dechesne (1):
        imlib2: update SRC_URI

  Peter Kjellerstedt (1):
        libwebsockets: Avoid absolute paths in *.cmake files in the sysroot

  Portia (1):
        cpulimit: introduce support for this package

  Randy MacLeod (1):
        intel-speed-select: Add libnl dependency and extend CFLAGS

  Richard Neill (1):
        bats: Add patch to fix false-negatives caused by teardown code

  Ross Burton (1):
        Revert "python3-cbor2: upgrade 5.4.2 -> 5.4.3"

  Samuli Piippo (1):
        python3-qface: upgrade 2.0.7 -> 2.0.8

  Teresa Remmet (1):
        meta-networking: Add meta-python to BBFILES_DYNAMIC

  Vyacheslav Yurkov (1):
        polkit: add udisks2 rule

  Windel Bouwman (1):
        Add zfs recipe

  Xu Huan (17):
        python3-astroid: upgrade 2.11.2 -> 2.11.3
        python3-bitstruct: upgrade 8.14.0 -> 8.14.1
        python3-cachecontrol: upgrade 0.12.10 -> 0.12.11
        python3-engineio: upgrade 4.3.1 -> 4.3.2
        python3-flask-socketio: upgrade 5.1.1 -> 5.1.2
        python3-google-api-python-client: upgrade 2.43.0 -> 2.45.0
        python3-graphviz: upgrade 0.19.2 -> 0.20
        python3-cbor2: upgrade 5.4.2 -> 5.4.3
        python3-click: upgrade 8.1.2 -> 8.1.3
        python3-flask-login: upgrade 0.6.0 -> 0.6.1
        python3-flask: upgrade 2.1.1 -> 2.1.2
        python3-google-api-core: upgrade 2.7.1 -> 2.7.3
        python3-google-auth: upgrade 2.6.3 -> 2.6.6
        python3-mypy: upgrade 0.942 -> 0.950
        python3-pyalsaaudio: upgrade 0.9.0 -> 0.9.2
        python3-grpcio-tools: upgrade 1.45.0 -> 1.46.0
        python3-pychromecast: upgrade 11.0.0 -> 12.1.1

  Yi Zhao (1):
        networkmanager: fix parallel build failure

  wangmy (41):
        python3-sentry-sdk: upgrade 1.5.8 -> 1.5.10
        python3-socketio: upgrade 5.5.2 -> 5.6.0
        python3-textparser: upgrade 0.23.0 -> 0.24.0
        python3-twisted: upgrade 22.2.0 -> 22.4.0
        python3-websockets: upgrade 10.2 -> 10.3
        fuse3: upgrade 3.10.5 -> 3.11.0
        zenity: upgrade 3.42.0 -> 3.42.1
        babeld: upgrade 1.11 -> 1.12
        cifs-utils: upgrade 6.14 -> 6.15
        nbdkit: upgrade 1.31.1 -> 1.31.2
        stunnel: upgrade 5.63 -> 5.64
        tgt: upgrade 1.0.79 -> 1.0.82
        wolfssl: upgrade 5.2.0 -> 5.3.0
        ctags: upgrade 5.9.20220417.0 -> 5.9.20220501.0
        freerdp: upgrade 2.6.1 -> 2.7.0
        fwupd-efi: upgrade 1.2 -> 1.3
        htop: upgrade 3.1.2 -> 3.2.0
        hwdata: upgrade 0.358 -> 0.359
        icewm: upgrade 2.9.6 -> 2.9.7
        iwd: upgrade 1.26 -> 1.27
        jemalloc: upgrade 5.2.1 -> 5.3.0
        libmbim: upgrade 1.26.2 -> 1.26.4
        libyang: upgrade 2.0.164 -> 2.0.194
        nano: upgrade 6.2 -> 6.3
        phoronix-test-suite: upgrade 10.8.2 -> 10.8.3
        php: upgrade 8.1.4 -> 8.1.5
        pkcs11-helper: upgrade 1.28.0 -> 1.29.0
        poppler: upgrade 22.04.0 -> 22.05.0
        toybox: upgrade 0.8.6 -> 0.8.7
        unixodbc: upgrade 2.3.9 -> 2.3.11
        xmlsec1: upgrade 1.2.33 -> 1.2.34
        gtk4: upgrade 4.6.3 -> 4.6.4
        nbdkit: upgrade 1.31.2 -> 1.31.5
        ctags: upgrade 5.9.20220501.0 -> 5.9.20220508.0
        openjpeg: upgrade 2.4.0 -> 2.5.0
        php: upgrade 8.1.5 -> 8.1.6
        postgresql: upgrade 14.2 -> 14.3
        phpmyadmin: upgrade 5.1.3 -> 5.2.0
        python3-aiohue: upgrade 3.0.11 -> 4.4.1
        python3-awesomeversion : add recipe
        python3-traitlets: upgrade 5.1.1 -> 5.2.0

  zhengrq.fnst (12):
        glibmm-2.68: upgrade 2.70.0 -> 2.72.1
        gnome-text-editor: upgrade 42.0 -> 42.1
        apitrace: upgrade 10.0 -> 11.0
        libconfig-general-perl: upgrade 2.63 -> 2.65
        gpsd: upgrade 3.23.1 -> 3.24
        mbw: upgrade 1.4 -> 1.5
        gtk4: upgrade 4.6.2 -> 4.6.3
        python3-antlr4-runtime: upgrade 4.9.2 -> 4.10
        python3-booleanpy: upgrade 3.8 -> 4.0
        python3-pika: upgrade 1.2.0 -> 1.2.1
        python3-autobahn: upgrade 22.3.2 -> 22.4.2
        python3-bitarray: upgrade 2.4.1 -> 2.5.0

  zhengruoqin (7):
        python3-imageio: upgrade 2.17.0 -> 2.18.0
        python3-langtable: upgrade 0.0.57 -> 0.0.58
        python3-paramiko: upgrade 2.10.3 -> 2.10.4
        python3-protobuf: upgrade 3.20.0 -> 3.20.1
        python3-pylint: upgrade 2.13.5 -> 2.13.7
        python3-pymongo: upgrade 4.1.0 -> 4.1.1
        python3-regex: upgrade 2022.3.15 -> 2022.4.24

poky: 9e55696042..13d70e57f8:
  Alex Kiernan (7):
        eudev: Upgrade 3.2.10 -> 3.2.11
        eudev: Add PACKAGECONFIG for manpages & selinux
        pypi.bbclass: Set CVE_PRODUCT to PYPI_PACKAGE
        openssh: Add openssh-sftp-server to openssh RDEPENDS
        eudev: Convert dependencies to PACKAGECONFIG
        eudev: Cleanup redundant configuration
        eudev: Use PACKAGE_BEFORE_PN/${PN}, clean up spaces

  Alexander Kanavin (106):
        systemd: upgrade 250.4 -> 250.5
        python3-cryptography: upgrade 36.0.2 -> 37.0.1
        util-linux: upgrade 2.37.4 -> 2.38
        vulkan: upgrade 1.3.204.1 -> 1.3.211.0
        libnl: upgrade 3.5.0 -> 3.6.0
        libsdl2: upgrade 2.0.20 -> 2.0.22
        mesa: upgrade 22.0.0 -> 22.0.2
        python3-babel: upgrade 2.9.1 -> 2.10.1
        python3-mako: upgrade 1.1.6 -> 1.2.0
        python3-pygments: upgrade 2.11.2 -> 2.12.0
        at-spi2-core: upgrade 2.44.0 -> 2.44.1
        bind: upgrade 9.18.1 -> 9.18.2
        cronie: upgrade 1.6.0 -> 1.6.1
        diffoscope: upgrade 208 -> 211
        dnf: upgrade 4.11.1 -> 4.12.0
        ell: upgrade 0.49 -> 0.50
        epiphany: upgrade 42.0 -> 42.2
        ffmpeg: upgrade 5.0 -> 5.0.1
        fribidi: upgrade 1.0.11 -> 1.0.12
        harfbuzz: upgrade 4.2.0 -> 4.2.1
        libinput: upgrade 1.19.3 -> 1.19.4
        libmnl: upgrade 1.0.4 -> 1.0.5
        libnotify: upgrade 0.7.9 -> 0.7.11
        libpipeline: upgrade 1.5.5 -> 1.5.6
        libseccomp: upgrade 2.5.3 -> 2.5.4
        libx11: upgrade 1.7.5 -> 1.8
        lttng-tools: upgrade 2.13.4 -> 2.13.7
        mmc-utils: upgrade to latest revision
        neard: upgrade 0.16 -> 0.18
        pango: upgrade 1.50.6 -> 1.50.7
        parted: upgrade 3.4 -> 3.5
        piglit: upgrade to latest revision
        python3-cryptography-vectors: upgrade 36.0.2 -> 37.0.1
        python3-dtschema: upgrade 2022.1 -> 2022.4
        python3-hypothesis: upgrade 6.44.0 -> 6.46.0
        python3-jinja2: upgrade 3.1.1 -> 3.1.2
        python3-pygobject: upgrade 3.42.0 -> 3.42.1
        python3-pytest: upgrade 7.1.1 -> 7.1.2
        repo: upgrade 2.23 -> 2.24.1
        sqlite3: upgrade 3.38.2 -> 3.38.3
        vala: upgrade 0.56.0 -> 0.56.1
        vte: upgrade 0.66.2 -> 0.68.0
        webkitgtk: upgrade 2.36.0 -> 2.36.1
        xorgproto: upgrade 2021.5 -> 2022.1
        xwayland: upgrade 22.1.0 -> 22.1.1
        sysvinit: update 3.02 -> 3.04
        pciutils: update 3.7.0 -> 3.8.0
        elfutils: update 0.186 -> 0.187
        git: update 2.35.3 -> 2.36.0
        libdnf: update 0.66.0 -> 0.67.0
        llvm: update 14.0.1 -> 14.0.3
        rsync: update 3.2.3 -> 3.2.4
        lsof: update 4.94.0 -> 4.95.0
        libhandy: update 1.5.0 -> 1.6.2
        librsvg: update 2.54.0 -> 2.54.1
        xauth: update 1.1.1 -> 1.1.2
        gnupg: update 2.3.4 -> 2.3.6
        qemu: update 6.2.0 -> 7.0.0
        stress-ng: disable apparmor from the correct spot
        coreutils: update 9.0 -> 9.1
        python3-setuptools: upgrade 59.5.0 -> 62.3.1
        go: upgrade 1.18.1 -> 1.18.2
        iptables: upgrade 1.8.7 -> 1.8.8
        gnu-config: update to latest version
        u-boot: upgrade 2022.01 -> 2022.04
        python3-pip: update 22.0.4 -> 22.1
        libxcb: update 1.14 -> 1.15
        xcb-proto: upgrade 1.14.1 -> 1.15
        systemtap: update 4.6 -> 4.7
        vulkan-samples: update to latest revision
        curl: upgrade 7.83.0 -> 7.83.1
        diffoscope: upgrade 211 -> 212
        git: upgrade 2.36.0 -> 2.36.1
        gnutls: upgrade 3.7.4 -> 3.7.5
        gst-devtools: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-libav: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-omx: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-bad: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-base: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-good: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-plugins-ugly: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-python: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-rtsp-server: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0: upgrade 1.20.1 -> 1.20.2
        gstreamer1.0-vaapi: upgrade 1.20.1 -> 1.20.2
        libcgroup: upgrade 2.0.1 -> 2.0.2
        libnotify: upgrade 0.7.11 -> 0.7.12
        librsvg: upgrade 2.54.1 -> 2.54.3
        mesa: upgrade 22.0.2 -> 22.0.3
        mobile-broadband-provider-info: upgrade 20220315 -> 20220511
        piglit: upgrade to latest revision
        psmisc: upgrade 23.4 -> 23.5
        python3-bcrypt: upgrade 3.2.0 -> 3.2.2
        python3-cryptography: upgrade 37.0.1 -> 37.0.2
        python3-cryptography-vectors: upgrade 37.0.1 -> 37.0.2
        python3-hypothesis: upgrade 6.46.0 -> 6.46.4
        python3-jsonschema: upgrade 4.4.0 -> 4.5.1
        python3-markdown: upgrade 3.3.6 -> 3.3.7
        python3-more-itertools: upgrade 8.12.0 -> 8.13.0
        python3-pbr: upgrade 5.8.1 -> 5.9.0
        python3-pyparsing: upgrade 3.0.8 -> 3.0.9
        repo: upgrade 2.24.1 -> 2.25
        sqlite3: upgrade 3.38.3 -> 3.38.5
        stress-ng: upgrade 0.14.00 -> 0.14.01
        python3-setuptools-rust: update 1.1.2 -> 1.3.0
        python3: use built-in distutils for ptest, rather than setuptools' 'fork'

  Andrej Valek (1):
        kernel: add missing path to search for debug files

  Arkadiusz Drabczyk (1):
        overview-manual: fix a forgotten link

  Aryaman Gupta (1):
        e2fsprogs: update upstream status

  Bruce Ashfield (23):
        linux-yocto/5.15: arm: poky-tiny cleanup and fixes
        linux-yocto/5.10: update to v5.10.110
        linux-yocto/5.10: base: enable kernel crypto userspace API
        linux-yocto/5.15: update to v5.15.33
        linux-yocto/5.15: base: enable kernel crypto userspace API
        linux-yocto/5.15: kasan: fix BUG: sleeping function called from invalid context
        linux-yocto/5.15: fix ppc boot
        linux-yocto/5.15: netfilter: conntrack: avoid useless indirection during conntrack destruction
        linux-yocto/5.10: update to v5.10.112
        linux-yocto/5.15: update to v5.15.35
        linux-yocto/5.15: Fix CVE-2022-28796
        linux-yocto: enable powerpc debug fragment
        linux-yocto/5.15: fix -standard kernel build issue
        linux-yocto/5.15: update to v5.15.36
        linux-yocto/5.15: fix qemuarm graphical boot
        strace: fix ptest failure in landlock
        yocto-bsps: update to v5.15.36
        yocto-bsps: update to v5.10.113
        linux-yocto/5.15: update to v5.15.37
        linux-yocto/5.10: update to v5.10.113
        linux-yocto/5.15: update to v5.15.38
        linux-yocto/5.10: update to v5.10.114
        lttng-modules: fix build against 5.18-rc7+

  Changqing Li (1):
        eudev: create static-nodes in init script

  Chanho Park (2):
        externalsrc.bbclass: support crate fetcher on externalsrc
        cargo_common.bbclass: enable bitbake vendoring for externalsrc

  Claudius Heine (3):
        classes: rootfs-postcommands: add skip option to overlayfs_qa_check
        overlayfs: add docs about skipping QA check & service dependencies
        wic: added fspassno parameter to partition

  Davide Gardenal (4):
        cve-check: add JSON format to summary output
        cve-check: fix symlinks where link and output path are equal
        rootfs-postcommands: fix symlinks where link and output path are equal
        openssl: minor security upgrade 3.0.2 -> 3.0.3

  Dmitry Baryshkov (3):
        linux-firmware: upgrade 20220411 -> 20220509
        linux-firmware: package new Qualcomm firmware
        image.bbclass: allow overriding dependency on virtual/kernel:do_deploy

  Felix Moessbauer (1):
        wic/plugins/rootfs: Fix permissions when splitting rootfs folders across partitions

  Gunjan Gupta (2):
        bitbake: fetch2/osc: Small fixes for osc fetcher
        bitbake: fetch2/osc: Add support to query latest revision

  Jacob Kroon (1):
        Revert "image.bbclass: allow overriding dependency on virtual/kernel:do_deploy"

  Jiaqing Zhao (5):
        libxml2: Upgrade 2.9.13 -> 2.9.14
        systemd: Drop 0001-test-parse-argument-Include-signal.h.patch
        systemd: Remove __compare_fn_t type in musl-specific patch
        systemd: Drop 0002-don-t-use-glibc-specific-qsort_r.patch
        systemd: Correct path returned in sd_path_lookup()

  Jon Mason (1):
        qemuarmv5: use arm-versatile-926ejs KMACHINE

  Kai Kang (1):
        wpa-supplicant: update config for gnutls

  Khem Raj (15):
        qemu: Add packageconfig for libbpf support
        linux-yocto: Enable powerpc-debug fragment for ppc64 LE
        musl: Upgrade to tip of trunk
        systemd: Fix build regression with latest update
        gcc: upgrade 11.3 -> 12.1
        libstd-rs: Forward port rust libc patches
        gdb: Upgrade to 12.1
        bash: build with bash_cv_getcwd_malloc=yes on musl too
        ovmf: Fix native build with gcc-12
        elfutils: Disable stringop-overflow warning for build host
        musl-locales: Switch SRC_URI to new location
        systemd: Drop redundant musl patches
        systemd: Document future actions needed for set of musl patches
        systemd: Drop 0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
        systemd: Update patch status

  Konrad Weihmann (1):
        linux-firmware: replace mkdir by install

  Kory Maincent (1):
        images_types: isolate the write of UBI configuration

  Leon Anavi (1):
        image_types/runqemu-addptable2image: Fix a minor typo

  Markus Volk (2):
        mesa.inc: package 00-radv-defaults.conf
        libsdl2: add PACKAGECONFIG for libusb1 and remove obsolete options

  Marta Rybczynska (3):
        cve-update-db-native: update the CVE database once a day only
        cve-update-db-native: let the user to drive the update interval
        cve-check: Fix report generation

  Martin Jansa (1):
        bitbake: osc: fix DeprecationWarning

  Michael Halstead (5):
        releases: update to include 3.1.16
        scripts/autobuilder-worker-prereq-tests: update to use yocto 4.0
        scripts/autobuilder-worker-prereq-tests: add additional limit testing
        releases: update to include 3.4.4
        releases: include 4.0.1

  Michael Opdenacker (12):
        MAINTAINERS.md: no more need for a prelink-cross maintainer
        dev-manual: further gdb usage simplifications
        doc/Makefile: fix epub and latexpdf targets
        manuals: fix name capitalization issues
        doc: standards for project and file names
        manuals: improve the width of diagrams
        manuals: improve documentation for TEMPLATECONF
        overview-manual: remove confusing and unnecessary paragraph about site.conf
        manuals: add quoting to references to bitbake.conf
        manuals: add missing space in appends
        manuals: add documentation for WKS_FILES
        migration guides: release notes for 3.4.3 and 3.4.4

  Mingli Yu (1):
        python3-cryptography: remove --benchmark-disable option

  Peter Kjellerstedt (4):
        base-passwd: Regenerate the patches
        base-passwd: Update to 3.5.52
        base-passwd: Update the status for two patches
        librsvg: Drop the dependency on libcroco

  Quentin Schulz (2):
        docs: set_versions.py: remove hardknott from active releases list
        docs: set_versions.py: show release name in switchers.js

  Raphael Teller (1):
        kernel.bbclass: Do not overwrite recipe's custom postinst

  Richard Purdie (25):
        bitbake: cookerdata: Change emphasis in error message to be clearer to users
        cairo: Add missing GPLv3 license checksum entry
        libgcrypt: Drop GPLv3 license after upstream changes
        base: Avoid circular references to our own scripts
        scripts: Make git intercept global
        scripts/git: Ensure we don't have circular references
        abi_version/sstate: Bump hashequiv and sstate versions due to git changes
        vim: Upgrade 8.2.4681 -> 8.2.4912
        package: Ensure we track whether PRSERV was active or not
        libgcrypt: Fix reproducibility issues in ptest
        liberror-perl: Update sstate/equiv versions to clean cache
        freetype: Upgrade 2.12.0 -> 2.12.1
        bitbake: fetch/git : Use cat as pager
        pciutils: Add make-native dependency
        sanity: Don't warn about make 4.2.1 for mint
        bitbake: build: Add clean_stamp API function to allow removal of task stamps
        staging: Fix rare sysroot corruption issue
        selftest/imagefeatures/overlayfs: Always append to DISTRO_FEATURES
        udev-extraconf/initrdscripts/parted: Rename mount.blacklist -> mount.ignorelist
        layer.conf: Don't use indirect help2man-native dependencies
        rust-common: Fix sstate signatures between arm hf and non-hf
        rust-common: Drop LLVM_TARGET and simplify
        rust-common: Fix native signature dependency issues
        scripts/patchreview: Add commit to stored json data
        scripts/patchreview: Make json output human parsable

  Robert Joslyn (1):
        powerpc: Remove invalid GLIBC_EXTRA_OECONF

  Roland Hieber (1):
        bitbake: cache: correctly handle file names containing colons

  Ross Burton (4):
        oeqa/selftest: add test for git working correctly inside pseudo
        Revert "bitbake.conf: mark all directories as safe for git to read"
        kernel-yocto.bbclass: say what SRC_URI entry is being dropped
        oeqa/selftest/cve_check: add tests for recipe and image reports

  Rouven Czerwinski (1):
        kbd: fix pam DISTRO_FEATURES check

  Samuli Piippo (1):
        binutils: Bump to latest 2.38 release branch

  Schmidt, Adriaan (1):
        bitbake: bitbake-diffsigs: break on first dependent task difference

  Simone Weiss (1):
        libgcrypt: Add ptest

  Steve Sakoman (2):
        virgl: skip headless test on alma 8.6
        python3: fix reproducibility issue with python3-core

  Sundeep KOKKONDA (3):
        dev-manual: improvements for gdbserver configuration
        rust-common: Ensure sstate signatures have correct dependencues for do_rust_gen_targets
        rust-common: Fix for target definitions returning 'NoneType' for arm

  Thomas Epperson (1):
        dev-manual: fix documentation for bmaptool usage

  Thomas Perrot (1):
        man-pages: add an alternative link name for crypt_r.3

  Tomasz Dziendzielski (1):
        bitbake: data: Do not depend on vardepvalueexclude flag

  Trevor Woerner (1):
        DISTRO_FEATURES: remove uclibc remnants

  Zoltán Böszörményi (2):
        npm.bbclass: Fix file permissions before opening it for writing
        npm.bbclass: Don't create /usr/lib/node symlink

  leimaohui (1):
        cve-check.bbclass: Added do_populate_sdk[recrdeptask].

  wangmy (1):
        librepo: upgrade 1.14.2 -> 1.14.3

meta-raspberrypi: c97a9e34ab..62a84833d9:
  Andrei Gherzan (1):
        Revert "kmod: Enable xz compression"

  Khem Raj (3):
        rpi-config: Add option to enable One-wire interface
        linux-firmware-rpidistro: Create brcmfmac43455-sdio.raspberrypi,4-model-b.bin symlink
        linux-raspberrypi: Upgrade to 5.15.38

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: If15534d7da5bfa78ef2224bb09ff1a8eb96a0e10
diff --git a/poky/documentation/migration-guides/migration-2.2.rst b/poky/documentation/migration-guides/migration-2.2.rst
index 10aa2d0..fe7bc2c 100644
--- a/poky/documentation/migration-guides/migration-2.2.rst
+++ b/poky/documentation/migration-guides/migration-2.2.rst
@@ -70,7 +70,7 @@
 
 The metadata is now required to use Python 3 syntax. For help preparing
 metadata, see any of the many Python 3 porting guides available.
-Alternatively, you can reference the conversion commits for Bitbake and
+Alternatively, you can reference the conversion commits for BitBake and
 you can use :term:`OpenEmbedded-Core (OE-Core)` as a guide for changes. Following are
 particular areas of interest:
 
diff --git a/poky/documentation/migration-guides/migration-2.7.rst b/poky/documentation/migration-guides/migration-2.7.rst
index ae70353..1b8f1ce 100644
--- a/poky/documentation/migration-guides/migration-2.7.rst
+++ b/poky/documentation/migration-guides/migration-2.7.rst
@@ -15,7 +15,7 @@
    functions (e.g. ``def funcname:``) in the metadata for tab
    indentation. If found, BitBake produces a warning.
 
--  Bitbake now checks
+-  BitBake now checks
    :term:`BBFILE_COLLECTIONS` for duplicate
    entries and triggers an error if any are found.
 
diff --git a/poky/documentation/migration-guides/migration-3.0.rst b/poky/documentation/migration-guides/migration-3.0.rst
index 50d6758..1219edf 100644
--- a/poky/documentation/migration-guides/migration-3.0.rst
+++ b/poky/documentation/migration-guides/migration-3.0.rst
@@ -152,7 +152,7 @@
 
 .. _migration-3.0-bitbake-changes:
 
-Bitbake Changes
+BitBake Changes
 ---------------
 
 The following BitBake changes have occurred.
diff --git a/poky/documentation/migration-guides/migration-3.2.rst b/poky/documentation/migration-guides/migration-3.2.rst
index d593eff..a376ece 100644
--- a/poky/documentation/migration-guides/migration-3.2.rst
+++ b/poky/documentation/migration-guides/migration-3.2.rst
@@ -86,7 +86,7 @@
 dependencies (e.g. in :term:`RDEPENDS` and :term:`RRECOMMENDS` values)
 where the dependency is conditionally added.
 
-If you have anonymous python or in-line python conditionally adding
+If you have anonymous Python or in-line Python conditionally adding
 dependencies in your custom recipes, and you intend for those recipes to
 work with multilib, then you will need to ensure that ``${MLPREFIX}``
 is prefixed on the package names in the dependencies, for example
@@ -149,7 +149,7 @@
 Packaging changes
 -----------------
 
-- ``python3``: the ``urllib`` python package has now moved into the core package, as it is used more commonly than just netclient (e.g. email, xml, mimetypes, pydoc). In addition, the ``pathlib`` module is now also part of the core package.
+- ``python3``: the ``urllib`` Python package has now moved into the core package, as it is used more commonly than just netclient (e.g. email, xml, mimetypes, pydoc). In addition, the ``pathlib`` module is now also part of the core package.
 
 - ``iptables``: ``iptables-apply`` and ``ip6tables-apply`` have been split out to their own package to avoid a bash dependency in the main ``iptables`` package
 
@@ -283,7 +283,7 @@
 ---------------------------------------------------------------------------
 
 The defaults for the following image artifact name variables have been moved
-from bitbake.conf to a new ``image-artifact-names`` class:
+from ``bitbake.conf`` to a new ``image-artifact-names`` class:
 
 - :term:`IMAGE_BASENAME`
 - :term:`IMAGE_LINK_NAME`
diff --git a/poky/documentation/migration-guides/migration-3.3.rst b/poky/documentation/migration-guides/migration-3.3.rst
index 1eb494c..22562da 100644
--- a/poky/documentation/migration-guides/migration-3.3.rst
+++ b/poky/documentation/migration-guides/migration-3.3.rst
@@ -76,7 +76,7 @@
 
 .. _migration-3.3-distutils-path:
 
-``setup.py`` path for python modules
+``setup.py`` path for Python modules
 ------------------------------------
 
 In a Python module, sometimes ``setup.py`` can be buried deep in the
@@ -133,7 +133,7 @@
 - ``procps``: split ``ps`` and ``sysctl`` into their own packages
 - ``rpm``: split build and extra functionality into separate packages
 - ``sudo``: split ``sudo`` binary into ``sudo-sudo`` and libs into ``sudo-lib``
-- ``systemtap``: examples, python scripts and runtime material split out
+- ``systemtap``: examples, Python scripts and runtime material split out
 - ``util-linux``: ``libuuid`` has been split out to its own
   ``util-linux-libuuid`` recipe (and corresponding packages) to avoid circular
   dependencies if ``libgcrypt`` support is enabled in ``util-linux``.
diff --git a/poky/documentation/migration-guides/migration-3.4.rst b/poky/documentation/migration-guides/migration-3.4.rst
index d57c955..8db43a1 100644
--- a/poky/documentation/migration-guides/migration-3.4.rst
+++ b/poky/documentation/migration-guides/migration-3.4.rst
@@ -233,7 +233,7 @@
 Miscellaneous
 ~~~~~~~~~~~~~
 
-- Certificates are now properly checked when bitbake fetches sources
+- Certificates are now properly checked when BitBake fetches sources
   over HTTPS. If you receive errors as a result for your custom recipes,
   you will need to use a mirror or address the issue with the operators
   of the server in question.
diff --git a/poky/documentation/migration-guides/release-3.4.rst b/poky/documentation/migration-guides/release-3.4.rst
index 81476c4..6602310 100644
--- a/poky/documentation/migration-guides/release-3.4.rst
+++ b/poky/documentation/migration-guides/release-3.4.rst
@@ -7,4 +7,6 @@
    release-notes-3.4
    release-notes-3.4.1
    release-notes-3.4.2
+   release-notes-3.4.3
+   release-notes-3.4.4
 
diff --git a/poky/documentation/migration-guides/release-notes-3.4.1.rst b/poky/documentation/migration-guides/release-notes-3.4.1.rst
index b122887..0503f29 100644
--- a/poky/documentation/migration-guides/release-notes-3.4.1.rst
+++ b/poky/documentation/migration-guides/release-notes-3.4.1.rst
@@ -46,7 +46,7 @@
 -  bitbake: tests/fetch: Update pcre.org address after github changes
 -  bitbake: tests/runqueue: Ensure hashserv exits before deleting files
 -  bitbake: utils: Handle lockfile filenames that are too long for filesystems
--  bootchart2: Don't compile python modules
+-  bootchart2: Don't compile Python modules
 -  build-appliance-image: Update to honister head revision
 -  buildhistory: Fix package output files for SDKs
 -  busybox: 1.34.0 -> 1.34.1
diff --git a/poky/documentation/migration-guides/release-notes-3.4.3.rst b/poky/documentation/migration-guides/release-notes-3.4.3.rst
new file mode 100644
index 0000000..5e118d9
--- /dev/null
+++ b/poky/documentation/migration-guides/release-notes-3.4.3.rst
@@ -0,0 +1,197 @@
+Release notes for 3.4.3 (honister)
+----------------------------------
+
+Security Fixes in 3.4.3
+~~~~~~~~~~~~~~~~~~~~~~~
+
+-  ghostscript: fix :cve:`2021-3781`
+-  ghostscript: fix :cve:`2021-45949`
+-  tiff: Add backports for two CVEs from upstream (:cve:`2022-0561` & :cve:`2022-0562`)
+-  gcc : Fix :cve:`2021-46195`
+-  virglrenderer: fix `CVE-2022-0135 <https://security-tracker.debian.org/tracker/CVE-2022-0135>`__ and `CVE-2022-0175 <https://security-tracker.debian.org/tracker/CVE-2022-0175>`__
+-  binutils: Add fix for :cve:`2021-45078`
+
+
+Fixes in 3.4.3
+~~~~~~~~~~~~~~
+
+-  Revert "cve-check: add lockfile to task"
+-  asciidoc: update git repository
+-  bitbake: build: Tweak exception handling for setscene tasks
+-  bitbake: contrib: Fix hash server Dockerfile dependencies
+-  bitbake: cooker: Improve parsing failure from handled exception usability
+-  bitbake: data_smart: Fix overrides file/line message additions
+-  bitbake: fetch2: ssh: username and password are optional
+-  bitbake: tests/fetch: Handle upstream master -> main branch change
+-  bitbake: utils: Ensure shell function failure in python logging is correct
+-  build-appliance-image: Update to honister head revision
+-  build-appliance-image: Update to honister head revision
+-  coreutils: remove obsolete ignored CVE list
+-  crate-fetch: fix setscene failures
+-  cups: Add --with-dbusdir to EXTRA_OECONF for deterministic build
+-  cve-check: create directory of CVE_CHECK_MANIFEST before copy
+-  cve-check: get_cve_info should open the database read-only
+-  default-distrovars.inc: Switch connectivity check to a yoctoproject.org page
+-  depmodwrapper-cross: add config directory option
+-  devtool: deploy-target: Remove stripped binaries in pseudo context
+-  devtool: explicitly set main or master branches in upgrades when available
+-  docs: fix hardcoded link warning messages
+-  documentation: conf.py: update for 3.4.2
+-  documentation: prepare for 3.4.3 release
+-  expat: Upgrade to 2.4.7
+-  gcc-target: fix glob to remove gcc-<version> binary
+-  gcsections: add nativesdk-cairo to exclude list
+-  go: update to 1.16.15
+-  gst-devtools: 1.18.5 -> 1.18.6
+-  gst-examples: 1.18.5 -> 1.18.6
+-  gstreamer1.0-libav: 1.18.5 -> 1.18.6
+-  gstreamer1.0-omx: 1.18.5 -> 1.18.6
+-  gstreamer1.0-plugins-bad: 1.18.5 -> 1.18.6
+-  gstreamer1.0-plugins-base: 1.18.5 -> 1.18.6
+-  gstreamer1.0-plugins-good: 1.18.5 -> 1.18.6
+-  gstreamer1.0-plugins-ugly: 1.18.5 -> 1.18.6
+-  gstreamer1.0-python: 1.18.5 -> 1.18.6
+-  gstreamer1.0-rtsp-server: 1.18.5 -> 1.18.6
+-  gstreamer1.0-vaapi: 1.18.5 -> 1.18.6
+-  gstreamer1.0: 1.18.5 -> 1.18.6
+-  harfbuzz: upgrade 2.9.0 -> 2.9.1
+-  initramfs-framework: unmount automounts before switch_root
+-  kernel-devsrc: do not copy Module.symvers file during install
+-  libarchive : update to 3.5.3
+-  libpcap: Disable DPDK explicitly
+-  libxml-parser-perl: Add missing RDEPENDS
+-  linux-firmware: upgrade 20211216 -> 20220209
+-  linux-yocto/5.10: Fix ramoops/ftrace
+-  linux-yocto/5.10: features/zram: remove CONFIG_ZRAM_DEF_COMP
+-  linux-yocto/5.10: fix dssall build error with binutils 2.3.8
+-  linux-yocto/5.10: ppc/riscv: fix build with binutils 2.3.8
+-  linux-yocto/5.10: update genericx86* machines to v5.10.99
+-  linux-yocto/5.10: update to v5.10.103
+-  mc: fix build if ncurses have been configured without wide characters
+-  oeqa/buildtools: Switch to our webserver instead of example.com
+-  patch.py: Prevent git repo reinitialization
+-  perl: Improve and update module RPDEPENDS
+-  poky.conf: bump version for 3.4.3 honister release
+-  qemuboot: Fix build error if UNINATIVE_LOADER is unset
+-  quilt: Disable external sendmail for deterministic build
+-  recipetool: Fix circular reference in SRC_URI
+-  releases: update to include 3.3.5
+-  releases: update to include 3.4.2
+-  rootfs-postcommands: amend systemd_create_users add user to group check
+-  ruby: update 3.0.2 -> 3.0.3
+-  scripts/runqemu-ifdown: Don't treat the last iptables command as special
+-  sdk: fix search for dynamic loader
+-  selftest: recipetool: Correct the URI for socat
+-  sstate: inside the threadedpool don't write to the shared localdata
+-  uninative: Upgrade to 3.5
+-  util-linux: upgrade to 2.37.4
+-  vim: Update to 8.2.4524 for further CVE fixes
+-  wic: Use custom kernel path if provided
+-  wireless-regdb: upgrade 2021.08.28 -> 2022.02.18
+-  zip: modify when match.S is built
+
+Contributors to 3.4.3
+~~~~~~~~~~~~~~~~~~~~~
+
+-  Alexander Kanavin
+-  Anuj Mittal
+-  Bill Pittman
+-  Bruce Ashfield
+-  Chee Yang Lee
+-  Christian Eggers
+-  Daniel Gomez
+-  Daniel Müller
+-  Daniel Wagenknecht
+-  Florian Amstutz
+-  Joe Slater
+-  Jose Quaresma
+-  Justin Bronder
+-  Lee Chee Yang
+-  Michael Halstead
+-  Michael Opdenacker
+-  Oleksandr Ocheretnyi
+-  Oleksandr Suvorov
+-  Pavel Zhukov
+-  Peter Kjellerstedt
+-  Richard Purdie
+-  Robert Yang
+-  Ross Burton
+-  Sakib Sajal
+-  Saul Wold
+-  Sean Anderson
+-  Stefan Herbrechtsmeier
+-  Tamizharasan Kumar
+-  Tean Cunningham
+-  Zoltán Böszörményi
+-  pgowda
+-  wangmy
+
+Repositories / Downloads for 3.4.3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+poky
+
+-  Repository Location: https://git.yoctoproject.org/poky/
+-  Branch: :yocto_git:`honister </poky/log/?h=honister>`
+-  Tag: `yocto-3.4.3 <https://git.yoctoproject.org/poky/tag/?h=yocto-3.4.3>`__
+-  Git Revision: :yocto_git:`ee68ae307fd951b9de6b31dc6713ea29186b7749 </poky/commit/?id=ee68ae307fd951b9de6b31dc6713ea29186b7749>`
+-  Release Artefact: poky-ee68ae307fd951b9de6b31dc6713ea29186b7749
+-  sha: 92c3d73c3e74f0e1d5c2ab2836ce3a3accbe47772cea70df3755845e0db1379b
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.3/poky-ee68ae307fd951b9de6b31dc6713ea29186b7749.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.3/poky-ee68ae307fd951b9de6b31dc6713ea29186b7749.tar.bz2
+
+openembedded-core
+
+-  Repository Location: :oe_git:`/openembedded-core`
+-  Branch: :oe_git:`honister </openembedded-core/log/?h=honister>`
+-  Tag: :oe_git:`yocto-3.4.3 </openembedded-core/tag/?h=yocto-3.4.3>`
+-  Git Revision: :oe_git:`ebca8f3ac9372b7ebb3d39e8f7f930b63b481448 </openembedded-core/commit/?id=ebca8f3ac9372b7ebb3d39e8f7f930b63b481448>`
+-  Release Artefact: oecore-ebca8f3ac9372b7ebb3d39e8f7f930b63b481448
+-  sha: f28e503f6f6c0bcd9192dbd528f8e3c7bcea504c089117e0094d9a4f315f4b9f
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.3/oecore-ebca8f3ac9372b7ebb3d39e8f7f930b63b481448.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.3/oecore-ebca8f3ac9372b7ebb3d39e8f7f930b63b481448.tar.bz2
+
+meta-mingw
+
+-  Repository Location: https://git.yoctoproject.org/meta-mingw
+-  Branch: :yocto_git:`honister </meta-mingw/log/?h=honister>`
+-  Tag: :yocto_git:`yocto-3.4.3 </meta-mingw/tag/?h=yocto-3.4.3>`
+-  Git Revision: :yocto_git:`f5d761cbd5c957e4405c5d40b0c236d263c916a8 </meta-mingw/commit/?id=f5d761cbd5c957e4405c5d40b0c236d263c916a8>`
+-  Release Artefact: meta-mingw-f5d761cbd5c957e4405c5d40b0c236d263c916a8
+-  sha: d4305d638ef80948584526c8ca386a8cf77933dffb8a3b8da98d26a5c40fcc11
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.3/meta-mingw-f5d761cbd5c957e4405c5d40b0c236d263c916a8.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.3/meta-mingw-f5d761cbd5c957e4405c5d40b0c236d263c916a8.tar.bz2
+
+meta-gplv2
+
+-  Repository Location: https://git.yoctoproject.org/meta-gplv2
+-  Branch: :yocto_git:`honister </meta-gplv2/log/?h=honister>`
+-  Tag: :yocto_git:`yocto-3.4.3 </meta-gplv2/tag/?h=yocto-3.4.3>`
+-  Git Revision: :yocto_git:`f04e4369bf9dd3385165281b9fa2ed1043b0e400 </meta-gplv2/commit/?id=f04e4369bf9dd3385165281b9fa2ed1043b0e400>`
+-  Release Artefact: meta-gplv2-f04e4369bf9dd3385165281b9fa2ed1043b0e400
+-  sha: ef8e2b1ec1fb43dbee4ff6990ac736315c7bc2d8c8e79249e1d337558657d3fe
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.3/meta-gplv2-f04e4369bf9dd3385165281b9fa2ed1043b0e400.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.3/meta-gplv2-f04e4369bf9dd3385165281b9fa2ed1043b0e400.tar.bz2
+
+bitbake
+
+-  Repository Location: :oe_git:`/bitbake`
+-  Branch: :oe_git:`1.52 </bitbake/log/?h=1.52>`
+-  Tag: :oe_git:`yocto-3.4.3 </bitbake/tag/?h=yocto-3.4.3>`
+-  Git Revision: :oe_git:`43dcb2b2a2b95a5c959be57bca94fb7190ea6257 </bitbake/commit/?id=43dcb2b2a2b95a5c959be57bca94fb7190ea6257>`
+-  Release Artefact: bitbake-43dcb2b2a2b95a5c959be57bca94fb7190ea6257
+-  sha: 92497ff97fed81dcc6d3e202969fb63ca983a8f5d9d91cafc6aee88312f79cf9
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.3/bitbake-43dcb2b2a2b95a5c959be57bca94fb7190ea6257.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.3/bitbake-43dcb2b2a2b95a5c959be57bca94fb7190ea6257.tar.bz2
+
+yocto-docs
+
+-  Repository Location: https://git.yoctoproject.org/yocto-docs
+-  Branch: :yocto_git:`honister </yocto-docs/log/?h=honister>`
+-  Tag: :yocto_git:`yocto-3.4.3 </yocto-docs/tag/?h=yocto-3.4.3>`
+-  Git Revision: :yocto_git:`15f46f97d9cad558c19fc1dc19cfbe3720271d04 </yocto-docs/commit/?15f46f97d9cad558c19fc1dc19cfbe3720271d04>`
diff --git a/poky/documentation/migration-guides/release-notes-3.4.4.rst b/poky/documentation/migration-guides/release-notes-3.4.4.rst
new file mode 100644
index 0000000..91beba0
--- /dev/null
+++ b/poky/documentation/migration-guides/release-notes-3.4.4.rst
@@ -0,0 +1,155 @@
+Release notes for 3.4.4 (honister)
+----------------------------------
+
+Security Fixes in 3.4.4
+~~~~~~~~~~~~~~~~~~~~~~~
+
+-  tiff: fix :cve:`2022-0865`, :cve:`2022-0891`, :cve:`2022-0907`, :cve:`2022-0908`, :cve:`2022-0909` and :cve:`2022-0924`
+-  xz: fix `CVE-2022-1271 <https://security-tracker.debian.org/tracker/CVE-2022-1271>`__
+-  unzip: fix `CVE-2021-4217 <https://security-tracker.debian.org/tracker/CVE-2021-4217>`__
+-  zlib: fix :cve:`2018-25032`
+-  grub: ignore :cve:`2021-46705`
+
+Fixes in 3.4.4
+~~~~~~~~~~~~~~
+
+-  alsa-tools: Ensure we install correctly
+-  bitbake.conf: mark all directories as safe for git to read
+-  bitbake: knotty: display active tasks when printing keepAlive() message
+-  bitbake: knotty: reduce keep-alive timeout from 5000s (83 minutes) to 10 minutes
+-  bitbake: server/process: Disable gc around critical section
+-  bitbake: server/xmlrpcserver: Add missing xmlrpcclient import
+-  bitbake: toaster: Fix IMAGE_INSTALL issues with _append vs :append
+-  bitbake: toaster: fixtures replace gatesgarth
+-  build-appliance-image: Update to honister head revision
+-  conf.py/poky.yaml: Move version information to poky.yaml and read in conf.py
+-  conf/machine: fix QEMU x86 sound options
+-  devupstream: fix handling of SRC_URI
+-  documentation: update for 3.4.4 release
+-  externalsrc/devtool: Fix to work with fixed export funcition flags handling
+-  gmp: add missing COPYINGv3
+-  gnu-config: update SRC_URI
+-  libxml2: fix CVE-2022-23308 regression
+-  libxml2: move to gitlab.gnome.org
+-  libxml2: update to 2.9.13
+-  libxshmfence: Correct LICENSE to HPND
+-  license_image.bbclass: close package.manifest file
+-  linux-firmware: correct license for ar3k firmware
+-  linux-firmware: upgrade 20220310 -> 20220411
+-  linux-yocto-rt/5.10: update to -rt61
+-  linux-yocto/5.10: cfg/debug: add configs for kcsan
+-  linux-yocto/5.10: split vtpm for more granular inclusion
+-  linux-yocto/5.10: update to v5.10.109
+-  linux-yocto: nohz_full boot arg fix
+-  oe-pkgdata-util: Adapt to the new variable override syntax
+-  oeqa/selftest/devtool: ensure Git username is set before upgrade tests
+-  poky.conf: bump version for 3.4.4 release
+-  pseudo: Add patch to workaround paths with crazy lengths
+-  pseudo: Fix handling of absolute links
+-  sanity: Add warning for local hasheqiv server with remote sstate mirrors
+-  scripts/runqemu: Fix memory limits for qemux86-64
+-  shadow-native: Simplify and fix syslog disable patch
+-  tiff: Add marker for CVE-2022-1056 being fixed
+-  toaster: Fix broken overrides usage
+-  u-boot: Inherit pkgconfig
+-  uninative: Upgrade to 3.6 with gcc 12 support
+-  vim: Upgrade 8.2.4524 -> 8.2.4681
+-  virglrenderer: update SRC_URI
+-  webkitgtk: update to 2.32.4
+-  wireless-regdb: upgrade 2022.02.18 -> 2022.04.08
+
+Known Issues
+~~~~~~~~~~~~
+
+There were a couple of known autobuilder intermittent bugs that occurred during release testing but these are not regressions in the release.
+
+Contributors to 3.4.4
+~~~~~~~~~~~~~~~~~~~~~
+
+-  Alexandre Belloni
+-  Anuj Mittal
+-  Bruce Ashfield
+-  Chee Yang Lee
+-  Dmitry Baryshkov
+-  Joe Slater
+-  Konrad Weihmann
+-  Martin Jansa
+-  Michael Opdenacker
+-  Minjae Kim
+-  Peter Kjellerstedt
+-  Ralph Siemsen
+-  Richard Purdie
+-  Ross Burton
+-  Tim Orling
+-  wangmy
+-  zhengruoqin
+
+Repositories / Downloads for 3.4.4
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+poky
+
+-  Repository Location: https://git.yoctoproject.org/poky/
+-  Branch: :yocto_git:`honister </poky/log/?h=honister>`
+-  Tag: `yocto-3.4.4 <https://git.yoctoproject.org/poky/tag/?h=yocto-3.4.4>`__
+-  Git Revision: :yocto_git:`780eeec8851950ee6ac07a2a398ba937206bd2e4 </poky/commit/?id=780eeec8851950ee6ac07a2a398ba937206bd2e4>`
+-  Release Artefact: poky-780eeec8851950ee6ac07a2a398ba937206bd2e4
+-  sha: 09558927064454ec2492da376156b716d9fd14aae57196435d742db7bfdb4b95
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.4/poky-780eeec8851950ee6ac07a2a398ba937206bd2e4.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.4/poky-780eeec8851950ee6ac07a2a398ba937206bd2e4.tar.bz2
+
+openembedded-core
+
+-  Repository Location: :oe_git:`/openembedded-core`
+-  Branch: :oe_git:`honister </openembedded-core/log/?h=honister>`
+-  Tag: :oe_git:`yocto-3.4.4 </openembedded-core/tag/?h=yocto-3.4.4>`
+-  Git Revision: :oe_git:`1a6f5e27249afb6fb4d47c523b62b5dd2482a69d </openembedded-core/commit/?id=1a6f5e27249afb6fb4d47c523b62b5dd2482a69d>`
+-  Release Artefact: oecore-1a6f5e27249afb6fb4d47c523b62b5dd2482a69d
+-  sha: b8354ca457756384139a579b9e51f1ba854013c99add90c0c4c6ef68421fede5
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.4/oecore-1a6f5e27249afb6fb4d47c523b62b5dd2482a69d.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.4/oecore-1a6f5e27249afb6fb4d47c523b62b5dd2482a69d.tar.bz2
+
+meta-mingw
+
+-  Repository Location: https://git.yoctoproject.org/meta-mingw
+-  Branch: :yocto_git:`honister </meta-mingw/log/?h=honister>`
+-  Tag: :yocto_git:`yocto-3.4.4 </meta-mingw/tag/?h=yocto-3.4.4>`
+-  Git Revision: :yocto_git:`f5d761cbd5c957e4405c5d40b0c236d263c916a8 </meta-mingw/commit/?id=f5d761cbd5c957e4405c5d40b0c236d263c916a8>`
+-  Release Artefact: meta-mingw-f5d761cbd5c957e4405c5d40b0c236d263c916a8
+-  sha: d4305d638ef80948584526c8ca386a8cf77933dffb8a3b8da98d26a5c40fcc11
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.4/meta-mingw-f5d761cbd5c957e4405c5d40b0c236d263c916a8.tar.bz2
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.4/meta-mingw-f5d761cbd5c957e4405c5d40b0c236d263c916a8.tar.bz2
+
+meta-gplv2
+
+-  Repository Location: https://git.yoctoproject.org/meta-gplv2
+-  Branch: :yocto_git:`honister </meta-gplv2/log/?h=honister>`
+-  Tag: :yocto_git:`yocto-3.4.4 </meta-gplv2/tag/?h=yocto-3.4.4>`
+-  Git Revision: :yocto_git:`f04e4369bf9dd3385165281b9fa2ed1043b0e400 </meta-gplv2/commit/?id=f04e4369bf9dd3385165281b9fa2ed1043b0e400>`
+-  Release Artefact: meta-gplv2-f04e4369bf9dd3385165281b9fa2ed1043b0e400
+-  sha: ef8e2b1ec1fb43dbee4ff6990ac736315c7bc2d8c8e79249e1d337558657d3fe
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.4/meta-gplv2-f04e4369bf9dd3385165281b9fa2ed1043b0e400.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.4/meta-gplv2-f04e4369bf9dd3385165281b9fa2ed1043b0e400.tar.bz2
+
+bitbake
+
+-  Repository Location: :oe_git:`/bitbake`
+-  Branch: :oe_git:`1.52 </bitbake/log/?h=1.52>`
+-  Tag: :oe_git:`yocto-3.4.4 </bitbake/tag/?h=yocto-3.4.3>`
+-  Git Revision: :oe_git:`c2d8f9b2137bd4a98eb0f51519493131773e7517 </bitbake/commit/?id=c2d8f9b2137bd4a98eb0f51519493131773e7517>`
+-  Release Artefact: bitbake-c2d8f9b2137bd4a98eb0f51519493131773e7517
+-  sha: a8b6217f2d63975bbf49f430e11046608023ee2827faa893b15d9a0d702cf833
+-  Download Locations:
+   http://downloads.yoctoproject.org/releases/yocto/yocto-3.4.4/bitbake-c2d8f9b2137bd4a98eb0f51519493131773e7517.tar.bz2,
+   http://mirrors.kernel.org/yocto/yocto/yocto-3.4.4/bitbake-c2d8f9b2137bd4a98eb0f51519493131773e7517.tar.bz2
+
+yocto-docs
+
+-  Repository Location: https://git.yoctoproject.org/yocto-docs
+-  Branch: :yocto_git:`honister </yocto-docs/log/?h=honister>`
+-  Tag: :yocto_git:`yocto-3.4.4 </yocto-docs/tag/?h=yocto-3.4.4>`
+-  Git Revision: :yocto_git:`5ead7d39aaf9044078dff27f462e29a8e31d89e4 </yocto-docs/commit/?5ead7d39aaf9044078dff27f462e29a8e31d89e4>`