Yocto 2.4
Move OpenBMC to Yocto 2.4(rocko)
Tested: Built and verified Witherspoon and Palmetto images
Change-Id: I12057b18610d6fb0e6903c60213690301e9b0c67
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/import-layers/yocto-poky/documentation/dev-manual/dev-manual-qemu.xml b/import-layers/yocto-poky/documentation/dev-manual/dev-manual-qemu.xml
index 41c1829..85e7315 100644
--- a/import-layers/yocto-poky/documentation/dev-manual/dev-manual-qemu.xml
+++ b/import-layers/yocto-poky/documentation/dev-manual/dev-manual-qemu.xml
@@ -6,427 +6,303 @@
<title>Using the Quick EMUlator (QEMU)</title>
-<para>
- Quick EMUlator (QEMU) is an Open Source project the Yocto Project uses
- as part of its development "tool set".
- As such, the information in this chapter is limited to the
- Yocto Project integration of QEMU and not QEMU in general.
- For official information and documentation on QEMU, see the
- following references:
- <itemizedlist>
- <listitem><para><emphasis><ulink url='http://wiki.qemu.org/Main_Page'>QEMU Website</ulink>:</emphasis>
- The official website for the QEMU Open Source project.
- </para></listitem>
- <listitem><para><emphasis><ulink url='http://wiki.qemu.org/Manual'>Documentation</ulink>:</emphasis>
- The QEMU user manual.
- </para></listitem>
- </itemizedlist>
-</para>
-
-<para>
- This chapter provides an overview of the Yocto Project's integration of
- QEMU, a description of how you use QEMU and its various options, running
- under a Network File System (NFS) server, and a few tips and tricks you
- might find helpful when using QEMU.
-</para>
-
-<section id='qemu-overview'>
- <title>Overview</title>
-
<para>
- Within the context of the Yocto Project, QEMU is an
- emulator and virtualization machine that allows you to run a complete
- image you have built using the Yocto Project as just another task
- on your build system.
- QEMU is useful for running and testing images and applications on
- supported Yocto Project architectures without having actual hardware.
- Among other things, the Yocto Project uses QEMU to run automated
- Quality Assurance (QA) tests on final images shipped with each
- release.
+ This chapter provides procedures that show you how to use the
+ Quick EMUlator (QEMU), which is an Open Source project the Yocto
+ Project uses as part of its development "tool set".
+ For reference information on the Yocto Project implementation of QEMU,
+ see the
+ "<ulink url='&YOCTO_DOCS_REF_URL;#ref-quick-emulator-qemu'>Quick EMUlator (QEMU)</ulink>"
+ section in the Yocto Project Reference Manual.
</para>
- <para>
- QEMU is made available with the Yocto Project a number of ways.
- One method is to install a Software Development Kit (SDK).
- For more information on how to make sure you have
- QEMU available, see the
- <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-intro'>Yocto Project Software Development Kit (SDK) Developer's Guide</ulink>.
- </para>
-</section>
-
-<section id='qemu-running-qemu'>
- <title>Running QEMU</title>
-
- <para>
- Running QEMU involves having your build environment set up, having the
- right artifacts available, and understanding how to use the many
- options that are available to you when you start QEMU using the
- <filename>runqemu</filename> command.
- </para>
-
- <section id='qemu-setting-up-the-environment'>
- <title>Setting Up the Environment</title>
+ <section id='qemu-running-qemu'>
+ <title>Running QEMU</title>
<para>
- You run QEMU in the same environment from which you run BitBake.
- This means you need to source a build environment script (i.e.
- <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
- or
- <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>).
- </para>
- </section>
+ To use QEMU, you need to have QEMU installed and initialized as
+ well as have the proper artifacts (i.e. image files and root
+ filesystems) available.
+ Follow these general steps to run QEMU:
+ <orderedlist>
+ <listitem><para>
+ <emphasis>Install QEMU:</emphasis>
+ See
+ "<ulink url='&YOCTO_DOCS_SDK_URL;#the-qemu-emulator'>The QEMU Emulator</ulink>"
+ section in the Yocto Project Application Development and
+ the Extensible Software Development Kit (eSDK) manual
+ for information on how to install QEMU.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>Setting Up the Environment:</emphasis>
+ How you set up the QEMU environment depends on how you
+ installed QEMU:
+ <itemizedlist>
+ <listitem><para>
+ If you cloned the <filename>poky</filename>
+ repository or you downloaded and unpacked a
+ Yocto Project release tarball, you can source
+ the build environment script (i.e.
+ <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>):
+ <literallayout class='monospaced'>
+ $ cd ~/poky
+ $ source oe-init-build-env
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ If you installed a cross-toolchain, you can
+ run the script that initializes the toolchain.
+ For example, the following commands run the
+ initialization script from the default
+ <filename>poky_sdk</filename> directory:
+ <literallayout class='monospaced'>
+ . ~/poky_sdk/environment-setup-core2-64-poky-linux
+ </literallayout>
+ </para></listitem>
+ </itemizedlist>
+ </para></listitem>
+ <listitem><para>
+ <emphasis>Ensure the Artifacts are in Place:</emphasis>
+ You need to be sure you have a pre-built kernel that
+ will boot in QEMU.
+ You also need the target root filesystem for your target
+ machine’s architecture:
+ <itemizedlist>
+ <listitem><para>
+ If you have previously built an image for QEMU
+ (e.g. <filename>qemux86</filename>,
+ <filename>qemuarm</filename>, and so forth),
+ then the artifacts are in place in your
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
+ </para></listitem>
+ <listitem><para>
+ If you have not built an image, you can go to the
+ <ulink url='&YOCTO_MACHINES_DL_URL;'>machines/qemu</ulink>
+ area and download a pre-built image that matches
+ your architecture and can be run on QEMU.
+ </para></listitem>
+ </itemizedlist></para>
- <section id='qemu-using-the-runqemu-command'>
- <title>Using the <filename>runqemu</filename> Command</title>
-
- <para>
- The basic <filename>runqemu</filename> command syntax is as
- follows:
- <literallayout class='monospaced'>
+ <para>See the
+ "<ulink url='&YOCTO_DOCS_SDK_URL;#sdk-extracting-the-root-filesystem'>Extracting the Root Filesystem</ulink>"
+ section in the Yocto Project Application Development and
+ the Extensible Software Development Kit (eSDK) manual
+ for information on how to extract a root filesystem.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>Run QEMU:</emphasis>
+ The basic <filename>runqemu</filename> command syntax is as
+ follows:
+ <literallayout class='monospaced'>
$ runqemu [<replaceable>option</replaceable> ] [...]
- </literallayout>
- Based on what you provide on the command line,
- <filename>runqemu</filename> does a good job of figuring out what
- you are trying to do.
- For example, by default, QEMU looks for the most recently built
- image according to the timestamp when it needs to look for an
- image.
- Minimally, through the use of options, you must provide either
- a machine name, a virtual machine image
- (<filename>*.vmdk</filename>), or a kernel image
- (<filename>*.bin</filename>).
- </para>
+ </literallayout>
+ Based on what you provide on the command line,
+ <filename>runqemu</filename> does a good job of figuring
+ out what you are trying to do.
+ For example, by default, QEMU looks for the most recently
+ built image according to the timestamp when it needs to
+ look for an image.
+ Minimally, through the use of options, you must provide
+ either a machine name, a virtual machine image
+ (<filename>*wic.vmdk</filename>), or a kernel image
+ (<filename>*.bin</filename>).</para>
- <para>
- Following is a description of <filename>runqemu</filename>
- options you can provide on the command line:
- <note><title>Tip</title>
- If you do provide some "illegal" option combination or perhaps
- you do not provide enough in the way of options,
- <filename>runqemu</filename> provides appropriate error
- messaging to help you correct the problem.
- </note>
- <itemizedlist>
- <listitem><para><replaceable>QEMUARCH</replaceable>:
- The QEMU machine architecture, which must be "qemux86",
- "qemux86_64", "qemuarm", "qemumips", "qemumipsel",
- “qemumips64", "qemush4", "qemuppc", "qemumicroblaze",
- or "qemuzynq".
- </para></listitem>
- <listitem><para><filename><replaceable>VM</replaceable></filename>:
- The virtual machine image, which must be a
- <filename>.vmdk</filename> file.
- Use this option when you want to boot a
- <filename>.vmdk</filename> image.
- The image filename you provide must contain one of the
- following strings: "qemux86-64", "qemux86", "qemuarm",
- "qemumips64", "qemumips", "qemuppc", or "qemush4".
- </para></listitem>
- <listitem><para><replaceable>ROOTFS</replaceable>:
- A root filesystem that has one of the following
- filetype extensions: "ext2", "ext3", "ext4", "jffs2",
- "nfs", or "btrfs".
- If the filename you provide for this option uses “nfs”, it
- must provide an explicit root filesystem path.
- </para></listitem>
- <listitem><para><replaceable>KERNEL</replaceable>:
- A kernel image, which is a <filename>.bin</filename> file.
- When you provide a <filename>.bin</filename> file,
- <filename>runqemu</filename> detects it and assumes the
- file is a kernel image.
- </para></listitem>
- <listitem><para><replaceable>MACHINE</replaceable>:
- The architecture of the QEMU machine, which must be one
- of the following: "qemux86",
- "qemux86-64", "qemuarm", "qemumips", "qemumipsel",
- “qemumips64", "qemush4", "qemuppc", "qemumicroblaze",
- or "qemuzynq".
- The <replaceable>MACHINE</replaceable> and
- <replaceable>QEMUARCH</replaceable> options are basically
- identical.
- If you do not provide a <replaceable>MACHINE</replaceable>
- option, <filename>runqemu</filename> tries to determine
- it based on other options.
- </para></listitem>
- <listitem><para><filename>ramfs</filename>:
- Indicates you are booting an initial RAM disk (initramfs)
- image, which means the <filename>FSTYPE</filename> is
- <filename>cpio.gz</filename>.
- </para></listitem>
- <listitem><para><filename>iso</filename>:
- Indicates you are booting an ISO image, which means the
- <filename>FSTYPE</filename> is
- <filename>.iso</filename>.
- </para></listitem>
- <listitem><para><filename>nographic</filename>:
- Disables the video console, which sets the console to
- "ttys0".
- </para></listitem>
- <listitem><para><filename>serial</filename>:
- Enables a serial console on
- <filename>/dev/ttyS0</filename>.
- </para></listitem>
- <listitem><para><filename>biosdir</filename>:
- Establishes a custom directory for BIOS, VGA BIOS and
- keymaps.
- </para></listitem>
- <listitem><para><filename>biosfilename</filename>:
- Establishes a custom BIOS name.
- </para></listitem>
- <listitem><para><filename>qemuparams=\"<replaceable>xyz</replaceable>\"</filename>:
- Specifies custom QEMU parameters.
- Use this option to pass options other than the simple
- "kvm" and "serial" options.
- </para></listitem>
- <listitem><para><filename>bootparams=\"<replaceable>xyz</replaceable>\"</filename>:
- Specifies custom boot parameters for the kernel.
- </para></listitem>
- <listitem><para><filename>audio</filename>:
- Enables audio in QEMU.
- The <replaceable>MACHINE</replaceable> option must be
- either "qemux86" or "qemux86-64" in order for audio to be
- enabled.
- Additionally, the <filename>snd_intel8x0</filename>
- or <filename>snd_ens1370</filename> driver must be
- installed in linux guest.
- </para></listitem>
- <listitem><para><filename>slirp</filename>:
- Enables "slirp" networking, which is a different way
- of networking that does not need root access
- but also is not as easy to use or comprehensive
- as the default.
- </para></listitem>
- <listitem><para id='kvm-cond'><filename>kvm</filename>:
- Enables KVM when running "qemux86" or "qemux86-64"
- QEMU architectures.
- For KVM to work, all the following conditions must be met:
+ <para>Here are some additional examples to help illustrate
+ further QEMU:
<itemizedlist>
<listitem><para>
- Your <replaceable>MACHINE</replaceable> must be either
-qemux86" or "qemux86-64".
+ This example starts QEMU with
+ <replaceable>MACHINE</replaceable> set to "qemux86".
+ Assuming a standard
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
+ <filename>runqemu</filename> automatically finds the
+ <filename>bzImage-qemux86.bin</filename> image file and
+ the
+ <filename>core-image-minimal-qemux86-20140707074611.rootfs.ext3</filename>
+ (assuming the current build created a
+ <filename>core-image-minimal</filename> image).
+ <note>
+ When more than one image with the same name exists, QEMU finds
+ and uses the most recently built image according to the
+ timestamp.
+ </note>
+ <literallayout class='monospaced'>
+ $ runqemu qemux86
+ </literallayout>
</para></listitem>
<listitem><para>
- Your build host has to have the KVM modules
- installed, which are
- <filename>/dev/kvm</filename>.
- </para></listitem>
- <listitem><para>
- The build host <filename>/dev/kvm</filename>
- directory has to be both writable and readable.
- </para></listitem>
- </itemizedlist>
- </para></listitem>
- <listitem><para><filename>kvm-vhost</filename>:
- Enables KVM with VHOST support when running "qemux86" or "qemux86-64"
- QEMU architectures.
- For KVM with VHOST to work, the following conditions must
- be met:
- <itemizedlist>
- <listitem><para>
- <link linkend='kvm-cond'>kvm</link> option
- conditions must be met.
- </para></listitem>
- <listitem><para>
- Your build host has to have virtio net device, which
- are <filename>/dev/vhost-net</filename>.
- </para></listitem>
- <listitem><para>
- The build host <filename>/dev/vhost-net</filename>
- directory has to be either readable or writable
- and “slirp-enabled”.
- </para></listitem>
- </itemizedlist>
- </para></listitem>
- <listitem><para><filename>publicvnc</filename>:
- Enables a VNC server open to all hosts.
- </para></listitem>
- </itemizedlist>
- </para>
-
- <para>
- For further understanding regarding option use with
- <filename>runqemu</filename>, consider some examples.
- </para>
-
- <para>
- This example starts QEMU with
- <replaceable>MACHINE</replaceable> set to "qemux86".
- Assuming a standard
- <link linkend='build-directory'>Build Directory</link>,
- <filename>runqemu</filename> automatically finds the
- <filename>bzImage-qemux86.bin</filename> image file and
- the
- <filename>core-image-minimal-qemux86-20140707074611.rootfs.ext3</filename>
- (assuming the current build created a
- <filename>core-image-minimal</filename> image).
- <note>
- When more than one image with the same name exists, QEMU finds
- and uses the most recently built image according to the
- timestamp.
- </note>
- <literallayout class='monospaced'>
- $ runqemu qemux86
- </literallayout>
- This example produces the exact same results as the
- previous example.
- This command, however, specifically provides the image
- and root filesystem type.
- <literallayout class='monospaced'>
+ This example produces the exact same results as the
+ previous example.
+ This command, however, specifically provides the image
+ and root filesystem type.
+ <literallayout class='monospaced'>
$ runqemu qemux86 core-image-minimal ext3
- </literallayout>
- This example specifies to boot an initial RAM disk image
- and to enable audio in QEMU.
- For this case, <filename>runqemu</filename> set the
- internal variable <filename>FSTYPE</filename> to
- "cpio.gz".
- Also, for audio to be enabled, an appropriate driver must
- be installed (see the previous description for the
- <filename>audio</filename> option for more information).
- <literallayout class='monospaced'>
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ This example specifies to boot an initial RAM disk image
+ and to enable audio in QEMU.
+ For this case, <filename>runqemu</filename> set the
+ internal variable <filename>FSTYPE</filename> to
+ "cpio.gz".
+ Also, for audio to be enabled, an appropriate driver must
+ be installed (see the previous description for the
+ <filename>audio</filename> option for more information).
+ <literallayout class='monospaced'>
$ runqemu qemux86 ramfs audio
- </literallayout>
- This example does not provide enough information for
- QEMU to launch.
- While the command does provide a root filesystem type, it
- must also minimally provide a
- <replaceable>MACHINE</replaceable>,
- <replaceable>KERNEL</replaceable>, or
- <replaceable>VM</replaceable> option.
- <literallayout class='monospaced'>
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ This example does not provide enough information for
+ QEMU to launch.
+ While the command does provide a root filesystem type, it
+ must also minimally provide a
+ <replaceable>MACHINE</replaceable>,
+ <replaceable>KERNEL</replaceable>, or
+ <replaceable>VM</replaceable> option.
+ <literallayout class='monospaced'>
$ runqemu ext3
- </literallayout>
- This example specifies to boot a virtual machine image
- (<filename>.vmdk</filename> file).
- From the <filename>.vmdk</filename>,
- <filename>runqemu</filename> determines the QEMU
- architecture (<replaceable>MACHINE</replaceable>) to be
- "qemux86" and the root filesystem type to be "vmdk".
- <literallayout class='monospaced'>
- $ runqemu /home/scott-lenovo/vm/core-image-minimal-qemux86.vmdk
- </literallayout>
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ This example specifies to boot a virtual machine
+ image (<filename>.wic.vmdk</filename> file).
+ From the <filename>.wic.vmdk</filename>,
+ <filename>runqemu</filename> determines the QEMU
+ architecture (<replaceable>MACHINE</replaceable>) to be
+ "qemux86" and the root filesystem type to be "vmdk".
+ <literallayout class='monospaced'>
+ $ runqemu /home/scott-lenovo/vm/core-image-minimal-qemux86.wic.vmdk
+ </literallayout>
+ </para></listitem>
+ </itemizedlist>
+ </para></listitem>
+ </orderedlist>
</para>
</section>
-</section>
-<section id='qemu-running-under-a-network-file-system-nfs-server'>
- <title>Running Under a Network File System (NFS) Server</title>
-
- <para>
- One method for running QEMU is to run it on an NFS server.
- This is useful when you need to access the same file system from both
- the build and the emulated system at the same time.
- It is also worth noting that the system does not need root privileges
- to run.
- It uses a user space NFS server to avoid that.
- This section describes how to set up for running QEMU using an NFS
- server and then how you can start and stop the server.
- </para>
-
- <section id='qemu-setting-up-to-use-nfs'>
- <title>Setting Up to Use NFS</title>
+ <section id='switching-between-consoles'>
+ <title>Switching Between Consoles</title>
<para>
- Once you are able to run QEMU in your environment, you can use the
- <filename>runqemu-extract-sdk</filename> script, which is located
- in the <filename>scripts</filename> directory along with
- <filename>runqemu</filename> script.
- The <filename>runqemu-extract-sdk</filename> takes a root
- file system tarball and extracts it into a location that you
- specify.
- Then, when you run <filename>runqemu</filename>, you can specify
- the location that has the file system to pass it to QEMU.
- Here is an example that takes a file system and extracts it to
- a directory named <filename>test-nfs</filename>:
- <literallayout class='monospaced'>
+ When booting or running QEMU, you can switch between
+ supported consoles by using
+ Ctrl+Alt+<replaceable>number</replaceable>.
+ For example, Ctrl+Alt+3 switches you to the serial console
+ as long as that console is enabled.
+ Being able to switch consoles is helpful, for example, if
+ the main QEMU console breaks for some reason.
+ <note>
+ Usually, "2" gets you to the main console and "3"
+ gets you to the serial console.
+ </note>
+ </para>
+ </section>
+
+ <section id='removing-the-splash-screen'>
+ <title>Removing the Splash Screen</title>
+
+ <para>
+ You can remove the splash screen when QEMU is booting by
+ using Alt+left.
+ Removing the splash screen allows you to see what is
+ happening in the background.
+ </para>
+ </section>
+
+ <section id='disabling-the-cursor-grab'>
+ <title>Disabling the Cursor Grab</title>
+
+ <para>
+ The default QEMU integration captures the cursor within the
+ main window.
+ It does this since standard mouse devices only provide
+ relative input and not absolute coordinates.
+ You then have to break out of the grab using the "Ctrl+Alt"
+ key combination.
+ However, the Yocto Project's integration of QEMU enables
+ the wacom USB touch pad driver by default to allow input
+ of absolute coordinates.
+ This default means that the mouse can enter and leave the
+ main window without the grab taking effect leading to a
+ better user experience.
+ </para>
+ </section>
+
+ <section id='qemu-running-under-a-network-file-system-nfs-server'>
+ <title>Running Under a Network File System (NFS) Server</title>
+
+ <para>
+ One method for running QEMU is to run it on an NFS server.
+ This is useful when you need to access the same file system
+ from both the build and the emulated system at the same time.
+ It is also worth noting that the system does not need root
+ privileges to run.
+ It uses a user space NFS server to avoid that.
+ Follow these steps to set up for running QEMU using an NFS
+ server.
+ <orderedlist>
+ <listitem><para>
+ <emphasis>Extract a Root Filesystem:</emphasis>
+ Once you are able to run QEMU in your environment, you can
+ use the <filename>runqemu-extract-sdk</filename> script,
+ which is located in the <filename>scripts</filename>
+ directory along with the <filename>runqemu</filename>
+ script.</para>
+
+ <para>The <filename>runqemu-extract-sdk</filename> takes a
+ root filesystem tarball and extracts it into a location
+ that you specify.
+ Here is an example that takes a file system and
+ extracts it to a directory named
+ <filename>test-nfs</filename>:
+ <literallayout class='monospaced'>
runqemu-extract-sdk ./tmp/deploy/images/qemux86/core-image-sato-qemux86.tar.bz2 test-nfs
- </literallayout>
- Once you have extracted the file system, you can run
- <filename>runqemu</filename> normally with the additional
- location of the file system.
- You can then also make changes to the files within
- <filename>./test-nfs</filename> and see those changes appear in the
- image in real time.
- Here is an example using the <filename>qemux86</filename> image:
- <literallayout class='monospaced'>
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ <emphasis>Start QEMU:</emphasis>
+ Once you have extracted the file system, you can run
+ <filename>runqemu</filename> normally with the additional
+ location of the file system.
+ You can then also make changes to the files within
+ <filename>./test-nfs</filename> and see those changes
+ appear in the image in real time.
+ Here is an example using the <filename>qemux86</filename>
+ image:
+ <literallayout class='monospaced'>
runqemu qemux86 ./test-nfs
- </literallayout>
- </para>
- </section>
-
- <section id='qemu-starting-and-stopping-nfs'>
- <title>Starting and Stopping NFS</title>
-
- <para>
- You can manually start and stop the NFS share using these
- commands:
- <itemizedlist>
- <listitem><para><emphasis><filename>start</filename>:</emphasis>
- Starts the NFS share:
- <literallayout class='monospaced'>
+ </literallayout>
+ </para></listitem>
+ </orderedlist>
+ <note>
+ <para>
+ Should you need to start, stop, or restart the NFS share,
+ you can use the following commands:
+ <itemizedlist>
+ <listitem><para>
+ The following command starts the NFS share:
+ <literallayout class='monospaced'>
runqemu-export-rootfs start <replaceable>file-system-location</replaceable>
- </literallayout>
- </para></listitem>
- <listitem><para><emphasis><filename>stop</filename>:</emphasis>
- Stops the NFS share:
- <literallayout class='monospaced'>
- runqemu-export-rootfs stop <replaceable>file-system-location</replaceable>
- </literallayout>
- </para></listitem>
- <listitem><para><emphasis><filename>restart</filename>:</emphasis>
- Restarts the NFS share:
- <literallayout class='monospaced'>
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ The following command stops the NFS share:
+ <literallayout class='monospaced'>
+ runqemu-export-rootfs stop <replaceable>file-system-location</replaceable>
+ </literallayout>
+ </para></listitem>
+ <listitem><para>
+ The following command restarts the NFS share:
+ <literallayout class='monospaced'>
runqemu-export-rootfs restart <replaceable>file-system-location</replaceable>
- </literallayout>
- </para></listitem>
- </itemizedlist>
+ </literallayout>
+ </para></listitem>
+ </itemizedlist>
+ </para>
+ </note>
</para>
</section>
-</section>
-
-<section id='qemu-tips-and-tricks'>
- <title>Tips and Tricks</title>
-
- <para>
- The following list describes things you can do to make running QEMU
- in the context of the Yocto Project a better experience:
- <itemizedlist>
- <listitem><para><emphasis>Switching Between Consoles:</emphasis>
- When booting or running QEMU, you can switch between
- supported consoles by using
- Ctrl+Alt+<replaceable>number</replaceable>.
- For example, Ctrl+Alt+3 switches you to the serial console as
- long as that console is enabled.
- Being able to switch consoles is helpful, for example, if the
- main QEMU console breaks for some reason.
- <note>
- Usually, "2" gets you to the main console and "3" gets you
- to the serial console.
- </note>
- </para></listitem>
- <listitem><para><emphasis>Removing the Splash Screen:</emphasis>
- You can remove the splash screen when QEMU is booting by
- using Alt+left.
- Removing the splash screen allows you to see what is happening
- in the background.
- </para></listitem>
- <listitem><para><emphasis>Disabling the Cursor Grab:</emphasis>
- The default QEMU integration captures the cursor within the
- main window.
- It does this since standard mouse devices only provide relative
- input and not absolute coordinates.
- You then have to break out of the grab using the "Ctrl+Alt" key
- combination.
- However, the Yocto Project's integration of QEMU enables the
- wacom USB touch pad driver by default to allow input of absolute
- coordinates.
- This default means that the mouse can enter and leave the
- main window without the grab taking effect leading to a better
- user experience.
- </para></listitem>
- </itemizedlist>
- </para>
-</section>
-
</chapter>
<!--
vim: expandtab tw=80 ts=4