subtree updates
poky: 80f2b56ad8..d78650b980:
Ahmed Hossam (1):
go.bbclass: Allow adding parameters to go ldflags
Alejandro Hernandez Samaniego (1):
baremetal-image: Fix do_image dependencies
Alexander Kanavin (153):
meson: update 0.58.1 -> 0.59.1
libcap: update 2.51 -> 2.54
lua: add a recipe from meta-oe
lua: update 5.3.6 -> 5.4.3
rpm: update 4.16.1.3 -> 4.17.0
libdnf: fix the rpm sqlite-only target setup
libsolv: disable rpm bdb format support
perl: do not build berkeley db module by default
package_rpm: use zstd instead of xz
qemu: update 6.0.0 -> 6.1.0
runqemu: correct vga-virtio option to keep virgl enabled
gnupg: update 2.3.1 -> 2.3.2
pinentry: update 1.1.1 -> 1.2.0
spirv-tools: update 2021.2 -> 2021.3
glslang: update 11.5.0 -> 11.6.0
shaderc: update 2021.1 -> 2021.2
inetutils: update 2.1 -> 2.2
systemd: update 249.3 -> 249.4
lsof: update 4.91 -> 4.94.0
libpam: update 1.5.1 -> 1.5.2
rt-tests: update 2.1 -> 2.2
libgit2: update 1.1.1 -> 1.2.0
libssh2: update 1.9.0 -> 1.10.0
libhandy: update 1.2.3 -> 1.4.0
qemu: install qmp module without hardcoding the python version in oeqa scripts
lttng-tools: replace ad hoc ptest fixup with upstream fixes
rust: drop PV from include file names
rust: update 1.54.0 -> 1.55.0
librsvg: update 2.40.21 -> 2.52.0 (transition to rust!)
librsvg: do not enable nativesdk
librsvg: add backports to fix big endian targets (e.g. mips)
librsvg: use only the target architecture to determine availability of atomic primitives
librsvg: restore reproducibility
adwaita-icon-theme: update 3.34/38 -> 41.0
gstreamer1.0-plugins-bad: disable rsvg on x32
rust/cargo: exclude UNINATIVE_LOADER from task signature
rust-common.bbclass: rewrite toolchain wrappers in (native) python
rust: do not write ar into target json definitions
rust: generate target definitions from (arch, abi), not just arch
openssl: update 1.1.1l -> 3.0.0
cryptodev-tests: do not use -Werror with openssl 3
serf: add a openssl 3 compatibility fix
ruby: disable openssl extension
glib-2.0: update 2.68.4 -> 2.70.0
glib-networking: update 2.68.2 -> 2.70.0
bison: update 3.7.6 -> 3.8.1
libdnf: update 0.63.1 -> 0.64.0
libexif: update 0.6.22 -> 0.6.23
sudo: update 1.9.7p2 -> 1.9.8p1
wget: update 1.21.1 -> 1.21.2
coreutils: update 8.32 -> 9.0
itstool: update 2.0.6 -> 2.0.7
nghttp2: add recipe from meta-oe
libsoup: add a 3.x recipe
webkitgtk: trim down DEPENDS
epiphany: trim down DEPENDS
webkitgtk: update 2.32.3 -> 2.34.0
epiphany: update 40.3 -> 41.0
python3: update 3.9.7 -> 3.10.0
libjitterentropy: update 3.1.0 -> 3.3.0
kea: update 1.8.2 -> 2.0.0
ghostscript: update 9.54.0 -> 9.55.0
lighttpd: update 1.4.59 -> 1.4.60
bluez5: update 5.61 -> 5.62
ovmf: update 202105 -> 202108
systemd: update 249.4 -> 249.5
meson: update 0.59.1 -> 0.59.2
python3-pip: update 21.2.4 -> 21.3
valgrind: update 3.17.0 -> 3.18.1
librsvg: update 2.52.0 -> 2.52.2
libva: update 2.12.0 -> 2.13.0
liberation-fonts: update 2.1.4 -> 2.1.5
ca-certificates: update 20210119 -> 20211016
curl: update 7.78.0 -> 7.79.1
libgit2: update 1.2.0 -> 1.3.0
libxcrypt: upgrade 4.4.25 -> 4.4.26
bison: upgrade 3.8.1 -> 3.8.2
cmake: update 3.21.2 -> 3.21.3
git: upgrade 2.33.0 -> 2.33.1
tzdata: upgrade 2021a -> 2021d
ofono: upgrade 1.32 -> 1.33
openssh: upgrade 8.7p1 -> 8.8p1
sysvinit: upgrade 2.99 -> 3.00
btrfs-tools: upgrade 5.13.1 -> 5.14.2
ccache: upgrade 4.4 -> 4.4.2
createrepo-c: upgrade 0.17.5 -> 0.17.6
libcomps: upgrade 0.1.17 -> 0.1.18
libedit: upgrade 20210714-3.1 -> 20210910-3.1
librepo: upgrade 1.14.1 -> 1.14.2
python3-jinja2: upgrade 3.0.1 -> 3.0.2
python3-pygobject: upgrade 3.40.1 -> 3.42.0
python3-setuptools: upgrade 58.0.4 -> 58.2.0
vala: upgrade 0.52.5 -> 0.54.2
acpica: upgrade 20210730 -> 20210930
asciidoc: upgrade 9.1.0 -> 9.1.1
libarchive: upgrade 3.5.1 -> 3.5.2
msmtp: upgrade 1.8.15 -> 1.8.17
sudo: upgrade 1.9.8p1 -> 1.9.8p2
gobject-introspection: upgrade 1.68.0 -> 1.70.0
gsettings-desktop-schemas: upgrade 40.0 -> 41.0
json-glib: upgrade 1.6.4 -> 1.6.6
libdazzle: upgrade 3.40.0 -> 3.42.0
harfbuzz: upgrade 2.9.1 -> 3.0.0
pango: upgrade 1.48.9 -> 1.48.10
libinput: upgrade 1.19.0 -> 1.19.1
linux-firmware: upgrade 20210818 -> 20210919
wireless-regdb: upgrade 2021.07.14 -> 2021.08.28
mpg123: upgrade 1.28.2 -> 1.29.0
puzzles: upgrade to latest revision
libwpe: upgrade 1.10.1 -> 1.12.0
diffoscope: upgrade 182 -> 187
fribidi: upgrade 1.0.10 -> 1.0.11
iso-codes: upgrade 4.6.0 -> 4.7.0
libatomic-ops: upgrade 7.6.10 -> 7.6.12
libcap: upgrade 2.54 -> 2.59
libmd: upgrade 1.0.3 -> 1.0.4
libsoup-2.4: upgrade 2.72.0 -> 2.74.0
gnupg: update 2.3.2 -> 2.3.3
libssh2: skip one of the ptests until openssh 8.8 compatibility is fixed
systemd: disable seccomp on mips32
waffle: convert to git, website is down
u-boot: upgrade 2021.07 -> 2021.10
psplash: upgrade to latest revision
stress-ng: convert to git, website is down
json-c: correct upstream version check
createrepo-c: upgrade 0.17.6 -> 0.17.7
python3-numpy: upgrade 1.21.2 -> 1.21.3
python3-pip: upgrade 21.3 -> 21.3.1
python3-setuptools: upgrade 58.2.0 -> 58.3.0
msmtp: upgrade 1.8.17 -> 1.8.18
gi-docgen: upgrade 2021.7 -> 2021.8
piglit: upgrade to latest revision
libinput: upgrade 1.19.1 -> 1.19.2
mpg123: upgrade 1.29.0 -> 1.29.2
puzzles: upgrade to latest revision
webkitgtk: upgrade 2.34.0 -> 2.34.1
wpebackend-fdo: upgrade 1.10.0 -> 1.12.0
diffoscope: upgrade 187 -> 188
libcap: upgrade 2.59 -> 2.60
vte: upgrade 0.64.2 -> 0.66.0
ncurses: update 6.2 -> 6.3
tzdata: update 2021d -> 2021e
asciidoc: update 9.1.1 -> 10.0.0
waffle: update 1.6.1 -> 1.7.0
virgl: skip headless test on specific older distros and fail otherwise
gptfdisk: address ncurses 6.3 compatibility
powertop: address ncurses 6.3 compatibility
systemtap: address ncurses 6.3 compatibility
igt-gpu-tools: address meson 0.60 compatibility
python3-pygobject: do not supply unknown g-i options
gstreamer1.0-python: do not supply unknown g-i options
webkitgtk: drop unnecessary SSE disabling patch
cups: exclude beta/rc versions from version check
Alexandre Belloni (5):
inetutils: drop CVE-2021-40491 patch
oeqa/selftest/sstatetests: fix typo ware -> were
maintainers.inc: fix up rust-cross entry
libevent,btrfs-tools: fix Upstream-Status tag
ruby: fix Upstream-Status
Andreas Müller (1):
webkitgtk: add gperf-native to DEPENDS to fix build
Andrei Gherzan (1):
qemu: Define libnfs PACKAGECONFIG
Andrej Valek (3):
busybox: 1.34.0 -> 1.34.1
featimage: refactor style
kernel-fitimage: use correct kernel image
Andres Beltran (1):
buildhistory: Fix package output files for SDKs
Bruce Ashfield (15):
linux-yocto/5.14: scripts/gcc-plugins: consistently use HOSTCC
linux-yocto/5.14: update to v5.14.8
linux-yocto/5.14: bsp/qemuarm*-gfx: use virtio graphics
linux-yocto/5.10: update to v5.10.69
linux-yocto/5.10: update to v5.10.70
linux-yocto/5.14: update to v5.14.9
kernel-yocto: don't apply config metadata patches twice
linux-yocto/5.14: revert: scripts/gcc-plugins: consistently use HOSTCC
linux-yocto/5.10: update to v5.10.73
linux-yocto/5.14: update to v5.14.12
linux-yocto/5.14: update to v5.14.13
linux-yocto/5.10: update to v5.10.74
linux-yocto/5.14: common-pc: enable CONFIG_ATA_PIIX as built-in
linux-yocto/5.14: update to v5.14.14
linux-yocto/5.10: update to v5.10.75
Caner Altinbasak (2):
bitbake: npmsw: Avoid race condition with multiple npm fetchers
bitbake: fetch2: Do not attempt to verify donestamp if download is not complete
Changhyeok Bae (2):
iproute2: update to 5.14.0
ethtool: update to 5.14
Changqing Li (1):
lttng-ust: fix do_compile failure for arm32 with DEBUG_BUILD enabled
Daiane Angolini (2):
machine/qemuarm*: Fix UBOOT_MACHINE value
ref-manual: Update how to set a useradd password
Daniel McGregor (3):
bison: prevent checking for textstyle.
bitbake.conf: Add gpg-agent as a host tool
sstate: Allow validation of sstate singatures against list of keys
David Joyner (1):
rust: add support for big endian 64-bit PowerPC
Denys Dmytriyenko (2):
wayland-protocols: upgrade 1.21 -> 1.22
wayland-protocols: upgrade 1.22 -> 1.23
Fred Liu (1):
glibc: Drop libcidn package
Henry Kleynhans (1):
sstate: Switch to ZStandard compressor support
Hsia-Jun(Randy) Li (1):
meson: install native file in sdk
Ian Ray (1):
archiver: Configurable tarball compression
Jon Mason (10):
oeqa/manual: Fix no longer valid URLs
bitbake: bitbake:toaster:test: Update SSTATE URL
yocto-bsp/poky: replace http with https for URLs
bitbake: bitbake: replace http with https for URLs
documentation: update sources mirror URL
documentation: replace http with https for URLs
documentation: use YOCTO_DL_URL
dev-manual: remove errant /
runqemu: add DEPLOY_DIR_IMAGE replacement in QB_OPT_APPEND
bitbake: bitbake-user-manual: update sources mirror URL
Jose Quaresma (15):
gstreamer1.0: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-base: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-good: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-bad: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-ugly: 1.18.4 -> 1.18.5
gstreamer1.0-rtsp-server: 1.18.4 -> 1.18.5
gstreamer1.0-libav: 1.18.4 -> 1.18.5
gstreamer1.0-vaapi: 1.18.4 -> 1.18.5
gstreamer1.0-omx: 1.18.4 -> 1.18.5
gstreamer1.0-python: 1.18.4 -> 1.18.5
gst-devtools: 1.18.4 -> 1.18.5
gst-examples: 1.18.4 -> 1.18.5
patch.bbclass: when the patch fails show more info on the fatal error
sstate.bbclass: count the files on mirrors using the pre local files
sstate: fix touching files inside pseudo
Joshua Watt (4):
bitbake: async: Close sync client event loop
bitbake: hashserv: Add tests for diverging reports
bitbake: hashserv: Fix diverging report race condition
classes/populate_sdk_base: Add setscene tasks
Kai Kang (1):
sudo: update multilib patch for sudo.conf
Khem Raj (11):
pkgconfig: Update to latest
libseccomp: Upgrade to 2.5.2 and beyond
openssl: Drop riscv32 upstreamed patches
opensbi-payloads.inc: Use strings for fallback
mesa: Enable svga for x86 only
qemu: Add knob for enabling PMDK pmem support
opensbi-payloads: Add dependency on kernel if fdt is set
librsvg: Fix vendored libc to work on riscv and musl
librsvg: Bump to 2.52.0 -> 2.52.2
rust: Upgrade to 1.56.0
librsvg: Disable 64bit atomics in crossbeam for rv32
Kiran Surendran (1):
ffmpeg: fix CVE-2021-38114
Konrad Weihmann (1):
libical: fix append in DEPENDS
Lukasz Majewski (1):
glibc: Extract common code to build tests to glibc-tests.inc
Marek Vasut (1):
piglit: upgrade to latest revision
Martin Jansa (2):
webkitgtk: add PACKAGECONFIG for opengl-or-es
boost: allow searching for python310
Maximilian Blenk (1):
mount-copybind: add rootcontext mountoption for overlayfs
Michael Halstead (2):
scripts/autobuilder-worker-prereq-tests: jinja2 check
releases: update to include 3.4 honister
Michael Opdenacker (18):
manuals: font fixes
ref-manual: document DEBUG_PREFIX_MAP
manuals: replace "apt-get" by "apt"
Makefile: allow epub and latexpdf outputs to use diagrams from SVG sources
conf.py: use PNG first in EPUB output
overview-manual: SVG diagram for the git workflow
docs: add "make all" to build old types of docs (html, epub, pdf) at once
manuals: introduce 'yocto_sstate' extlink
overview-manual: simplify expression
dev-manual: correct NO_GENERIC_LICENSE section title
dev-manual: warn about license compliance issues when static libraries are used
devpyshell: rename to pydevshell
ref-manual: document TOOLCHAIN_HOST_TASK_ESDK
manuals: rename "devpyshell" to "pydevshell"
ref-manual: document SOURCE_DATE_EPOCH
ref-manual: fix description of SOURCE_DATE_EPOCH
releases.rst: fix release number for 3.3.3
docs: poky.yaml: updates for 3.4
Mike Crowe (2):
lib/oe/qa,insane: Move extra error handling functions to library
insane,license,license_image: Allow treating license problems as errors
Mingli Yu (1):
packagedata.py: silence a DeprecationWarning
Oleh Matiusha (1):
findutils: add ptest
Oleksandr Kravchuk (15):
python3: update to 3.9.7
python3-git: update to 3.1.24
python3-dbusmock: update to 0.24.0
python3-setuptools: update to 58.0.4
python3-setuptools: minor cleanup
xf86-input-libinput: update to 1.2.0
libinput: update to 1.19.0
libxi: update to 1.8
xorgproto: update to 2021.5
xkeyboard-config: update to 2.34
libxkbcommon: update to 1.3.1
mirrors.bbclass: remove dead infozip mirrors
man-pages: update to 5.13
python3-smmap: update to 5.0.0
python3-pyparsing: update to 3.0.0
Pablo Saavedra Rodi?o (1):
mesa: upgrade 21.2.1 -> 21.2.4
Paul Barker (1):
bitbake: doc: bitbake-user-manual: Document BB_GIT_SHALLOW and friends
Paul Eggleton (7):
migration-3.4: tweak overrides change section
ref-manual: remove meta class
poky.yaml: add lz4 and zstd to essential host packages
migration-3.4: add additional migration info
migration: tweak introduction section
poky.yaml: fix lz4 package name for older Ubuntu versions
migration-3.4: add some extra packaging notes
Pavel Zhukov (1):
weston: wrapper for weston modules argument
Peter Hoyes (2):
u-boot: Convert ${UBOOT_ENV}.cmd into ${UBOOT_ENV}.scr
u-boot: Fix syntax error in ${UBOOT_ENV}.scr compilation
Peter Kjellerstedt (2):
meson.bblcass: Remove empty egg-info directories before running meson
qemu.inc: Remove empty egg-info directories before running meson
Petr Vorel (1):
ltp: Update to 20210927
Pgowda (2):
Fix rust-native build issue when debug is enabled
rust-cross: Fix directory not deleted for race glibc vs. musl
Ralph Siemsen (1):
tar: filter CVEs using vendor name
Randy Li (1):
meson: move lang args to the right section
Richard Purdie (54):
sstatesig: Only apply group/other permissions to pseudo files
rpm: Deterministically set vendor macro entry
abi_version/sstate: Bump to fix rpm corruption issues
multilib: Avoid sysroot race issues when multilib enabled
bitbake: knotty/uihelper: Show setscene task progress in summary output
bitbake: bitbake-worker: Handle pseudo shutdown in Ctrl+C case
poky.conf: Update tested distros list with recent changes
bitbake: hashserv: Improve behaviour for better determinism/sstate reuse
poky.conf: Bump version for 3.4 honister release
build-appliance-image: Update to honister head revision
bitbake: bitbake: Bump to version 1.52.0
build-appliance-image: Update to honister head revision
layer.conf: Extend recipes not to install without explict dependencies
libxml2: Use python3targetconfig to fix reproducibility issue
libnewt: Use python3targetconfig to fix reproducibility issue
bootchart2: Don't compile python modules
linux-yocto-dev: Ensure DEPENDS matches recent 5.14 kernel changes
base/insane: Import oe.qa by default
base: Clean up unneeded len() calls
base: Use repr() for printing exceptions
bitbake.conf: Add BB_CURRENTTASK to BB_HASHEXCLUDE
reproducible_build: Drop obsolete sstate workaround
python: Update now reproducibile builds are the default
bitbake: bitbake-worker: Set BB_CURRENTTASK earlier
bitbake: compress: Allow to operate on file descriptor
bitbake: siggen: Change file format of siginfo files to use zstd compressed json
sstate: Fixes for eSDK generation after zstd switch
patch: Use repr() with exceptions instead of str()
reproducible_build: Drop now unneeded compiler warning
reproducible: Move class function code into library
reproducible: Move variable definitions to bitbake.conf
reproducible: Merge code into base.bbclass
kernel: Add KERNEL_DEBUG_TIMESTAMPS variable
reproducible: Drop BUILD_REPRODUCIBLE_BINARIES variable
kernel: Rework kernel make flag to variable mappings
oeqa: Update cleanup code to wait for hashserv exit
poky: Reproducible builds are now the default
bitbake: tests/runqueue: Ensure hashserv exits before deleting files
bitbake: bitbake-worker: Add debug when unpickle fails
bitbake: siggen: Fix type conversion issues
bitbake: test/fetch: Update urls to match upstream branch name changes
libtool: Update patchset to match those submitted upstream
staging: Fix autoconf-native rebuild failure
patch: Fix exception reporting with repr()
bitbake: fetch2/perforce: Fix typo
bitbake: bitbake: Bump to post release verion 1.53.0
poky.conf: Post release version bump
gcc: Merge three related patches together
gcc: Drop sdt (dtrace) header patch
gcc: Drop broken/unneeded patch
bitbake: tests/runqueue: Drop python version test decorators
gcc: Update patches submitted/merged upstream
gcc: Drop testsuite failure fix patch
gcc: Add missing patch Upstream-Status
Ross Burton (21):
bitbake: tests/utils: mark a regex as a raw string
bitbake: tests/fetch: prefix the FetcherTest temporary directory
bitbake: fetch2: clarify the command-no-found error message
bitbake: fetch2/gitsm: remove the 'nugget' SRCREV caching
linux-yocto: add libmpc-native to DEPENDS
bitbake: fetch2: document checkstatus API
curl: fix CVE-2021-22945 through -22947
oe/license: implement ast.NodeVisitor.visit_Constant
license.bbclass: implement ast.NodeVisitor.visit_Constant
bitbake: codegen: implement ast.NodeVisitor.visit_Constant
testimage: fix unclosed testdata file
oe/utils: log exceptions in ThreadedWorker functions
sstate: don't silently handle all exceptions in sstate_checkhashes
gawk: replace AR patch with upstreamed patch
gawk: reduce strictness of the time test
strace: remove obsolete patch
strace: remove TOOLCHAIN assignment
oeqa/runtime: load modules using importlib
oeqa/runtime: search sys.path explicitly for modules
testimage: remove target_modules_path
strace: show test suite log on failure
Sakib Sajal (1):
go: upgrade 1.16.7 -> 1.16.8
Saul Wold (3):
spdx.py: Add annotation to relationship
create-spdx: add create_annotation function
create-spdx: cross recipes are native also
Stefan Herbrechtsmeier (17):
bitbake: fetch2: npm: Support npm archives with missing search directory mode
bitbake: fetch2: npm: Create config npmrc in environment instantiation
bitbake: fetch2: npmsw: Add support for local tarball and link sources
npm: Add support for EXTRA_OENPM arguments
recipetool: Move license md5sums into CSV files
recipetool: Skip common source files in guess_license
recipetool: Change default paramter fallback_licenses of function split_pkg_licenses from None to []
recipetool: ignore empty license files
recipetool: Add logger info for missing license entries
recipetool: Add support for linenumbers to licenses.csv
recipetool: npm: Do not add package.json files to LIC_FILES_CHKSUM
recipetool: npm: Use README as license fallback
npm: Add variable NPM_NODEDIR with default value
npm: Use configs for npm environment and args for npm run command
recipetool: Rework crunch_license to recognize more variants
recipetool: Simplify common source files skip in guess_license
npm: Remove unnecessary configs argument from npm run command
Teoh Jay Shen (1):
oeqa/runtime/parselogs: modified drm error in common errors list
Thomas Perrot (1):
image_types: allow the creation of block devices on top of UBI volumes
Tim Orling (17):
ptest-runner: install -collect-system-data script
python3-hypothesis: upgrade 6.15.0 -> 6.23.2
python3-importlib-metadata: upgrade 4.6.4 -> 4.8.1
python3-more-itertools: upgrade 8.9.0 -> 8.10.0
python3-zipp: upgrade 3.5.0 -> 3.6.0
libconvert-asn1-perl: upgrade 0.31 -> 0.33
python3-pytest: upgrade 6.2.4 -> 6.2.5
at-spi2-core: upgrade 2.40.3 -> 2.42.0
python3-packaging: DEPENDS on python3-setuptools-native
python3-packaging: BBCLASSEXTEND nativesdk
python3-tomli: add recipe for 1.2.1
python3-setuptools-scm: upgrade 6.0.1 -> 6.3.2
python3-setuptools: _distutils/sysconfig fix
python3-pyyaml: upgrade 5.4.1 -> 6.0
python3-manifest: -pprint RDEPENDS on -profile
python3-hypothesis: upgrade 6.23.2 -> 6.24.0
python3-tomli: upgrade 1.2.1 -> 1.2.2
Tobias Kaufmann (1):
mount-copybind: add SELinux support
Yureka (1):
systemd: add missing include for musl
Zoltán Böszörményi (1):
libpam: Fix build with DISTRO_FEATURES usrmerge
hongxu (1):
libcap: fix nativesdk-libcap relocate failure
wangmy (20):
diffoscope: upgrade 181 -> 182
cmake: upgrade 3.21.1 -> 3.21.2
gzip: upgrade 1.10 -> 1.11
harfbuzz: upgrade 2.9.0 -> 2.9.1
vulkan-headers: upgrade 1.2.182 -> 1.2.191
vulkan-loader: upgrade 1.2.182 -> 1.2.191
vulkan-tools: upgrade 1.2.182 -> 1.2.191
help2man: upgrade 1.48.4 -> 1.48.5
python3-more-itertools: upgrade 8.8.0 -> 8.9.0
acpid: upgrade 2.0.32 -> 2.0.33
bind: upgrade 9.16.20 -> 9.16.21
createrepo-c: upgrade 0.17.4 -> 0.17.5
dnf: upgrade 4.8.0 -> 4.9.0
ell: upgrade 0.43 -> 0.44
libical: upgrade 3.0.10 -> 3.0.11
dhcpcd: upgrade 9.4.0 -> 9.4.1
dnf: upgrade 4.9.0 -> 4.10.0
file: upgrade 5.40 -> 5.41
libdnf: upgrade 0.64.0 -> 0.65.0
lttng-tools: upgrade 2.13.0 -> 2.13.1
zhengruoqin (2):
libsolv: upgrade 0.7.19 -> 0.7.20
python3-pycryptodome: upgrade 3.10.1 -> 3.11.0
meta-security: a85fbe980e..e81c15f851:
Armin Kuster (1):
python3-fail2ban: fix build failure and cleanup
Kai Kang (1):
sssd: re-package to fix QA issues
Kristian Klausen (1):
swtpm: update to 0.6.1
Liwei Song (1):
recipes-security/chipsec: platform security assessment framework
meta-openembedded: 23dc4f060f..2f6797d8d6:
Alexander Kanavin (23):
python3-yappi: add python 3.10 fix
python3-gmpy2: update 2.0.8 -> 2.1.0rc1
python3-m2crypto: address build failure with openssl 3.x
lua: remove recipe as it is now in oe-core
nghttp2: remove recipe as it is now in oe-core
kronosnet: update 1.20 -> 1.22
polkit: update 0.116 -> 0.119
openflow: disable openssl PACKAGECONFIG
openipmi: add a python 3.10 compatibility patch
strongswan: disable openssl PACKAGECONFIG
pkcs11-helper: backport a openssl 3.x patch
nodejs: use -fpermissive
nodejs: add a python 3.10 compatibility patch
php: disable openssl PACKAGECONFIG
libsigrokdecode: add a python 3.10 compatibility patch
freerdp: backport openssl 3.x patches
opensc: do not use -Werror
cfengine: blacklist due to openssl 3.x incompatibility
netplan: do not use -Werror
boinc-client: blacklist due to openssl 3.x incompatibility
ldns: blacklist due to openssl 3.x incompatibility
surf: add a webkit 2.34 compatibility patch
mozjs: update 60.9.0 -> 91.1.0
Alexander Thoma (1):
keyutils: fix install path
Armin Kuster (1):
Apache: Several CVE fixes
Chen Qi (1):
ntfs-3g-ntfsprogs: upgrade to 2021.8.22
Gianfranco (2):
vboxguestdrivers: upgrade 6.1.26 -> 6.1.28
vboxguestdrivers: Fix build failure due to the last update.
Ivan Maidanski (1):
bdwgc: upgrade 8.0.4 -> 8.0.6
Jeremy Kerr (1):
mctp: Add MCTP control utilities
Joshua Watt (2):
colord-native: Inherit pkgconfig
mutter: Move gsettings to a separate package
Justin Bronder (2):
python3-mccabe: fix LICENSE and RDEPENDS
python3-pyflakes: fix LICENSE, HOMEPAGE and RDEPENDS
Khem Raj (44):
packagegroup-meta-oe: Add lv-drivers and lvgl
python3-pystache: Remove need for python2x
python3-behave: Switch to using github src_uri
python3-simpleeval: Remove use_2to3
python3-parse-type: Do not ask for 2to3
python3-anyjson: Do not enable 2to3
python3-pybluez: Do not set 2to3
packagegroup-meta-networking: Remove nghttp2
packagegroup-meta-oe: Remove lua
gjs: Inherit pkgconfig
luaposix: Use lua 5.4
devilspie2: Switch to using github repo
devilspie2: Add missing dependency on libxinerama
kronosnet: Correct path to poll.h
luaposix: Upgrade to 35.1
xfce.bbclass: Mark string as raw in a regexp
nodejs: add -fpermissive BUILD_CXXFLAGS
pcimem: Add riscv64 into COMPATIBLE_HOST
luaposix: Depend on libxcrypt-native
libcrypt-openssl-rsa-perl: Upgrade to 0.32
xrdp: Upgrade to 0.9.17
yelp,yelp-xsl,yelp-tools: Upgrade to 41 release
mozjs: Disable JIT on mips
libcrypt-openssl-rsa-perl: Fix build with openssl3+
nodejs: Upgrade to 14.18.1
librest: Use master with libsoup3 support
gnome-online-accounts: Upgrade to 3.43.1
iwd: Fix build with musl
xrdp: Exclude from builds
xorgxrdp: Add to exclusion list for now
bluepy: Set PV and correct syntax for RDEPENDS
python3-kivy: Use new override syntax in RDEPENDS
bluepy: Fix permissions on tarball
nodejs: Upgrade to 16.11.1
mozjs: Fix build on mips/musl
mozjs: Fix musl miscompiles with HAVE_THREAD_TLS_KEYWORD
luaposix: Use virtual/crypt instread of hardcoding libxcrypt
packagegroup-meta-oe: Add libjs-jquery-globalize and libjs-jquery-cookie
mozjs: Add riscv32 support
driverctl: Rename to have PV in recipe name
tbb: Link with libatomic when using clang compiler on rv32
gimp: Disable vector icons on mips/rv32 using clang
mozjs: Update to 91.2.0
mozjs: Fix build for 32bit systems disabling JIT
Kurt Kiefer (2):
mozjs: move large static library into staticdev package
gyp: fix for compatibility with Python 3.10
Leon Anavi (6):
python3-aiohue: Upgrade 2.6.1 -> 2.6.3
python3-paho-mqtt: Upgrade 1.5.1 -> 1.6.1
python3-thrift: Upgrade 0.13.0 -> 0.15.0
python3-prompt-toolkit: Upgrade 3.0.19 -> 3.0.21
python3-traitlets: Upgrade 5.1.0 -> 5.1.1
python3-prettytable: Upgrade 2.1.0 -> 2.2.1
LiweiSong (1):
Revert "chipsec: platform security assessment framework"
Marco Cavallini (1):
bluepy_git.bb: Added recipe for BluePy Python interface to Bluetooth LE on Linux (v2)
Marek Vasut (3):
apitrace: Upgrade to latest version
apitrace: Conditionally enable X11 support
yavta: Upgrade to latest version and drop downstream patch
Martin Jansa (4):
protobuf: import a patch from meta-webosose to fix building protobuf-c with gold linker
grpc: revert GRPCPP_ABSEIL_SYNC change from 1.40.0 to fix undefined references to absl::lts_20210324::Mutex::~Mutex()
luaposix: depend on target libxcrypt instead of native
lv-lib-png: add wayland to REQUIRED_DISTRO_FEATURES
Matthias Klein (1):
gpsd: Install also the generated parts of the Python library
Matthias Schiffer (1):
byacc: switch to official HTTPS mirror
Mingli Yu (1):
opencv: remove setup_vars_opencv4.sh
Oleksandr Kravchuk (72):
iwd: update to 1.18
nano: update to 5.9
ostree: update to 2021.5
pegtl: update to 3.2.1
pmdk: update to 1.11.1
protobuf-c: update to 1.4.0
thingsboard-gateway: update to 2.8
libbpf: fix PV
libcdio-paranoia: update to 10.2+2.0.1
ttf-abyssinica: update to 2.100
ttf-dejavu: add UPSTREAM_CHECK_URI
ttf-vlgothic: update to 20200720
networkmanager: update to 1.32.12
nng: update to 1.4.0
opensaf: update to 5.21.09
python3-absl: update 0.14.1
python3-alembic: update to 1.7.4
python3-astroid: update to 2.8.2
python3-cantools: update to 36.4.0
python3-certifi: update to 2021.10.8
python3-cffi: update to 1.15.0
python3-colorlog: update to 6.5.0
python3-coverage: update to 6.0.2
python3-cryptography-vectors: update to 35.0.0
python3-dateparser: update to 1.1.0
python3-elementpath: update to 2.3.2
python3-eventlet: update to 0.32.0
python3-google-api-core: update to 2.1.1
python3-google-api-python-client: update to 2.26.1
python3-google-auth: update to 2.3.0
python3-grpcio-tools: update to 1.41.0
python3-grpcio: update to 1.41.0
python3-h2: update to 4.1.0
python3-haversine: update to 2.5.1
python3-httplib2: update to 0.20.1
python3-idna: update to 3.3
python3-iso3166: update to 2.0.2
python3-joblib: update to 1.1.0
python3-jsonrpcserver: update to 5.0.3
python3-paramiko: update to 2.8.0
python3-portion: update to 2.2.0
python3-protobuf: update to 3.18.1
python3-pulsectl: update to 21.10.4
python3-pycodestyle: update to 2.8.0
python3-pyephem: update to 4.1
python3-pyflakes: update to 2.4.0
python3-pyjwt: update to 2.2.0
python3-pykickstart: update to 3.34
python3-pyopenssl: update to 21.0.0
python3-pyperf: update to 2.3.0
python3-pytest-timeout: update 2.0.1
python3-pytz: update to 2021.3
python3-regex: update to 2021.10.8
python3-sentry-sdk: update to 1.4.3
python3-sympy: udpate to 1.9
python3-twitter: update to 4.1.0
python3-uritemplate: update to 4.1.1
python3-websockets: update to 10.0
python3-wrapt: update to 1.13.2
python3-xlsxwriter: update to 3.0.1
python3-xmlschema: update to 1.8.0
python3-yarl: update to 1.7.0
python3-typeguard: update to 2.13.0
python3-pyatspi: update to 2.38.1
python3-h5py: update to 3.5.0
python3-pybind11-json: update to 0.2.11
python3-pychromecast: update to 9.3.1
python3-tzlocal: update to 4.0.1
python3-zeroconf: update to 0.36.9
leptonica: update to 1.82.0
redis-plus-plus: update to 1.3.2
hiredis: update to 1.0.2
Peter Bergin (3):
pipewire: remove manpages class
pipewire: also handle pipewire-media-session in systemd class
pipewire: rework PACKAGECONFIG for systemd service files
Philippe Coval (5):
lvgl: Add recipe for Lightweight Graphics Library
lv-drivers: Add recipe for lvgl lib
lv-lib-png: Add recipe for LVGL for handling PNG format
lvgl: Add lv_lib_png to packagegroup
lvgl: Lint recipe
Roland Hieber (1):
rapidjson: override hard-coded lib install dir
Shiping Ji (1):
Add recipe for driverctl
Tim Orling (6):
unicode-ucd: upgrade 12.1.0 -> 14.0.0
gnome-screenshot: add recipe for 40.0
libgweather: upgrade 3.36.2 -> 40.0
colord: inherit pkgconfig
gfbgraph: patch to build with latest rest
gnome-calendar: upgrade 3.38.1 -> 41.0
Trevor Gamblin (3):
python3-posix-ipc: Add recipe for version 1.0.5
python3-pyinotify: Add fcntl, logging to RDEPENDS
python3-cvxopt: upgrade 1.2.6 -> 1.2.7
Vyacheslav Yurkov (3):
grpc: fix cross-compilation of grpc applications
grpc: fix cross-compilation of grpc applications
grpc: upgrade 1.38.1 -> 1.41.0
Wang Mingyu (1):
poppler: upgrade 21.09.0 -> 21.10.0
Yi Zhao (3):
samba: upgrade 4.14.7 -> 4.14.8
audit: upgrade 3.0.5 -> 3.0.6
strongswan: upgrade 5.9.3 -> 5.9.4
Zoltán Böszörményi (1):
python3-jsmin: Upgrade to version 3.0.0
wangmy (11):
openvpn: upgrade 2.5.3 -> 2.5.4
redis: upgrade 6.2.5 -> 6.2.6
span-lite: upgrade 0.10.1 -> 0.10.3
bdwgc: upgrade 8.0.6 -> 8.2.0
icewm: upgrade 2.7.0 -> 2.8.0
ifenslave: upgrade 2.12 -> 2.13
asio: upgrade 1.18.1.bb -> 1.20.0
libgusb: upgrade 0.3.7 -> 0.3.8
libxmlb: upgrade 0.3.2 -> 0.3.3
xdebug: upgrade 2.9.5 -> 3.1.1
cryptsetup: upgrade 2.3.6 -> 2.4.1
zangrc (25):
python3-ipython: upgrade 7.27.0 -> 7.28.0
python3-jdatetime: upgrade 3.6.2 -> 3.6.4
python3-multidict: upgrade 5.1.0 -> 5.2.0
python3-openpyxl: upgrade 3.0.8 -> 3.0.9
python3-pyscaffold: upgrade 4.0.2 -> 4.1
python3-transitions: upgrade 0.8.9 -> 0.8.10
networkmanager-openvpn: upgrade 1.8.14 -> 1.8.16
ser2net: upgrade 4.3.3 -> 4.3.4
python3-humanize: upgrade 3.11.0 -> 3.12.0
python3-nmap: upgrade 1.5.0 -> 1.5.1
libjs-jquery-cookie: Add recipe
libjs-jquery-globalize: Add recipe
python3-cachetools: upgrade 4.2.2 -> 4.2.4
python3-cbor2: upgrade 5.4.1 -> 5.4.2
python3-click: upgrade 8.0.1 -> 8.0.3
python3-configargparse : upgrade 1.5.2 -> 1.5.3
python3-flask: upgrade 2.0.1 -> 2.0.2
python3-pyscaffold: upgrade 4.1 -> 4.1.1
python3-werkzeug: upgrade 2.0.1 -> 2.0.2
python3-absl: upgrade 0.14.1 -> 0.15.0
python3-pandas: upgrade 1.3.3 -> 1.3.4
python3-pulsectl: upgrade 21.10.4 -> 21.10.5
python3-pyjwt: upgrade 2.2.0 -> 2.3.0
python3-pytest-asyncio: upgrade 0.15.1 -> 0.16.0
python3-robotframework: upgrade 4.1.1 -> 4.1.2
zhengruoqin (15):
python3-ujson: upgrade 4.1.0 -> 4.2.0
python3-urllib3: upgrade 1.26.6 -> 1.26.7
python3-watchdog: upgrade 2.1.5 -> 2.1.6
gensio: upgrade 2.2.9 -> 2.3.1
nlohmann-json: upgrade 3.10.2 -> 3.10.4
libencode-perl: upgrade 3.12 -> 3.16
python3-socketio: upgrade 5.4.0 -> 5.4.1
python3-sqlalchemy: upgrade 1.4.23 -> 1.4.26
python3-stevedore: upgrade 3.4.0 -> 3.5.0
autofs: upgrade 5.1.7 -> 5.1.8
links: upgrade 2.22 -> 2.25
atftp: upgrade 0.7.4 -> 0.7.5
python3-gmqtt: upgrade 0.6.10 -> 0.6.11
python3-google-api-python-client: upgrade 2.26.1 -> 2.27.0
python3-greenlet: upgrade 1.1.1 -> 1.1.2
meta-raspberrypi: 9eb4879cf4..90b3ac6fb3:
Zygmunt Krynicki (1):
rpi-config: warn on config.txt lines exceeding 80 bytes
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I9e75d5bd606a913fbe69e6735c9ecafc436441ba
diff --git a/poky/bitbake/lib/bb/__init__.py b/poky/bitbake/lib/bb/__init__.py
index 5c248d3..e01b8d5 100644
--- a/poky/bitbake/lib/bb/__init__.py
+++ b/poky/bitbake/lib/bb/__init__.py
@@ -9,7 +9,7 @@
# SPDX-License-Identifier: GPL-2.0-only
#
-__version__ = "1.51.1"
+__version__ = "1.53.0"
import sys
if sys.version_info < (3, 6, 0):
diff --git a/poky/bitbake/lib/bb/asyncrpc/client.py b/poky/bitbake/lib/bb/asyncrpc/client.py
index 50e60d5..3496019 100644
--- a/poky/bitbake/lib/bb/asyncrpc/client.py
+++ b/poky/bitbake/lib/bb/asyncrpc/client.py
@@ -7,6 +7,7 @@
import json
import os
import socket
+import sys
from . import chunkify, DEFAULT_MAX_CHUNK
@@ -129,7 +130,7 @@
# required (but harmless) with it.
asyncio.set_event_loop(self.loop)
- self._add_methods('connect_tcp', 'close', 'ping')
+ self._add_methods('connect_tcp', 'ping')
@abc.abstractmethod
def _get_async_client(self):
@@ -163,3 +164,9 @@
@max_chunk.setter
def max_chunk(self, value):
self.client.max_chunk = value
+
+ def close(self):
+ self.loop.run_until_complete(self.client.close())
+ if sys.version_info >= (3, 6):
+ self.loop.run_until_complete(self.loop.shutdown_asyncgens())
+ self.loop.close()
diff --git a/poky/bitbake/lib/bb/build.py b/poky/bitbake/lib/bb/build.py
index 7e4ab9f..d6418e4 100644
--- a/poky/bitbake/lib/bb/build.py
+++ b/poky/bitbake/lib/bb/build.py
@@ -569,7 +569,6 @@
def _task_data(fn, task, d):
localdata = bb.data.createCopy(d)
localdata.setVar('BB_FILENAME', fn)
- localdata.setVar('BB_CURRENTTASK', task[3:])
localdata.setVar('OVERRIDES', 'task-%s:%s' %
(task[3:].replace('_', '-'), d.getVar('OVERRIDES', False)))
localdata.finalize()
diff --git a/poky/bitbake/lib/bb/compress/_pipecompress.py b/poky/bitbake/lib/bb/compress/_pipecompress.py
index 4b9f662..5de17a8 100644
--- a/poky/bitbake/lib/bb/compress/_pipecompress.py
+++ b/poky/bitbake/lib/bb/compress/_pipecompress.py
@@ -49,7 +49,7 @@
raise ValueError("Argument 'newline' not supported in binary mode")
file_mode = mode.replace("t", "")
- if isinstance(filename, (str, bytes, os.PathLike)):
+ if isinstance(filename, (str, bytes, os.PathLike, int)):
binary_file = cls(filename, file_mode, **kwargs)
elif hasattr(filename, "read") or hasattr(filename, "write"):
binary_file = cls(None, file_mode, fileobj=filename, **kwargs)
diff --git a/poky/bitbake/lib/bb/fetch2/__init__.py b/poky/bitbake/lib/bb/fetch2/__init__.py
index ee29d89..666cc13 100644
--- a/poky/bitbake/lib/bb/fetch2/__init__.py
+++ b/poky/bitbake/lib/bb/fetch2/__init__.py
@@ -884,7 +884,7 @@
(output, errors) = bb.process.run(cmd, log=log, shell=True, stderr=subprocess.PIPE, cwd=workdir)
success = True
except bb.process.NotFoundError as e:
- error_message = "Fetch command %s" % (e.command)
+ error_message = "Fetch command %s not found" % (e.command)
except bb.process.ExecutionError as e:
if e.stdout:
output = "output:\n%s\n%s" % (e.stdout, e.stderr)
@@ -1721,7 +1721,9 @@
self.d.setVar("BB_NO_NETWORK", "1")
firsterr = None
- verified_stamp = m.verify_donestamp(ud, self.d)
+ verified_stamp = False
+ if done:
+ verified_stamp = m.verify_donestamp(ud, self.d)
if not done and (not verified_stamp or m.need_update(ud, self.d)):
try:
if not trusted_network(self.d, ud.url):
@@ -1780,7 +1782,11 @@
def checkstatus(self, urls=None):
"""
- Check all urls exist upstream
+ Check all URLs exist upstream.
+
+ Returns None if the URLs exist, raises FetchError if the check wasn't
+ successful but there wasn't an error (such as file not found), and
+ raises other exceptions in error cases.
"""
if not urls:
diff --git a/poky/bitbake/lib/bb/fetch2/gitsm.py b/poky/bitbake/lib/bb/fetch2/gitsm.py
index a4527bf..a7110a9 100644
--- a/poky/bitbake/lib/bb/fetch2/gitsm.py
+++ b/poky/bitbake/lib/bb/fetch2/gitsm.py
@@ -140,16 +140,6 @@
if Git.need_update(self, ud, d):
return True
- try:
- # Check for the nugget dropped by the download operation
- known_srcrevs = runfetchcmd("%s config --get-all bitbake.srcrev" % \
- (ud.basecmd), d, workdir=ud.clonedir)
-
- if ud.revisions[ud.names[0]] in known_srcrevs.split():
- return False
- except bb.fetch2.FetchError:
- pass
-
need_update_list = []
def need_update_submodule(ud, url, module, modpath, workdir, d):
url += ";bareclone=1;nobranch=1"
@@ -172,11 +162,6 @@
shutil.rmtree(tmpdir)
else:
self.process_submodules(ud, ud.clonedir, need_update_submodule, d)
- if len(need_update_list) == 0:
- # We already have the required commits of all submodules. Drop
- # a nugget so we don't need to check again.
- runfetchcmd("%s config --add bitbake.srcrev %s" % \
- (ud.basecmd, ud.revisions[ud.names[0]]), d, workdir=ud.clonedir)
if len(need_update_list) > 0:
logger.debug('gitsm: Submodules requiring update: %s' % (' '.join(need_update_list)))
@@ -209,9 +194,6 @@
shutil.rmtree(tmpdir)
else:
self.process_submodules(ud, ud.clonedir, download_submodule, d)
- # Drop a nugget for the srcrev we've fetched (used by need_update)
- runfetchcmd("%s config --add bitbake.srcrev %s" % \
- (ud.basecmd, ud.revisions[ud.names[0]]), d, workdir=ud.clonedir)
def unpack(self, ud, destdir, d):
def unpack_submodules(ud, url, module, modpath, workdir, d):
diff --git a/poky/bitbake/lib/bb/fetch2/npm.py b/poky/bitbake/lib/bb/fetch2/npm.py
index 4789850..e497c38 100644
--- a/poky/bitbake/lib/bb/fetch2/npm.py
+++ b/poky/bitbake/lib/bb/fetch2/npm.py
@@ -69,17 +69,35 @@
bb.utils.mkdirhier(destdir)
cmd = "tar --extract --gzip --file=%s" % shlex.quote(tarball)
cmd += " --no-same-owner"
+ cmd += " --delay-directory-restore"
cmd += " --strip-components=1"
runfetchcmd(cmd, d, workdir=destdir)
+ runfetchcmd("chmod -R +X %s" % (destdir), d, quiet=True, workdir=destdir)
class NpmEnvironment(object):
"""
Using a npm config file seems more reliable than using cli arguments.
This class allows to create a controlled environment for npm commands.
"""
- def __init__(self, d, configs=None):
+ def __init__(self, d, configs=None, npmrc=None):
self.d = d
- self.configs = configs
+
+ if configs:
+ self.user_config = tempfile.NamedTemporaryFile(mode="w", buffering=1)
+ self.user_config_name = self.user_config.name
+ for key, value in configs:
+ self.user_config.write("%s=%s\n" % (key, value))
+ else:
+ self.user_config_name = "/dev/null"
+
+ if npmrc:
+ self.global_config_name = npmrc
+ else:
+ self.global_config_name = "/dev/null"
+
+ def __del__(self):
+ if self.user_config:
+ self.user_config.close()
def run(self, cmd, args=None, configs=None, workdir=None):
"""Run npm command in a controlled environment"""
@@ -87,23 +105,19 @@
d = bb.data.createCopy(self.d)
d.setVar("HOME", tmpdir)
- cfgfile = os.path.join(tmpdir, "npmrc")
-
if not workdir:
workdir = tmpdir
def _run(cmd):
- cmd = "NPM_CONFIG_USERCONFIG=%s " % cfgfile + cmd
- cmd = "NPM_CONFIG_GLOBALCONFIG=%s " % cfgfile + cmd
+ cmd = "NPM_CONFIG_USERCONFIG=%s " % (self.user_config_name) + cmd
+ cmd = "NPM_CONFIG_GLOBALCONFIG=%s " % (self.global_config_name) + cmd
return runfetchcmd(cmd, d, workdir=workdir)
- if self.configs:
- for key, value in self.configs:
- _run("npm config set %s %s" % (key, shlex.quote(value)))
-
if configs:
+ bb.warn("Use of configs argument of NpmEnvironment.run() function"
+ " is deprecated. Please use args argument instead.")
for key, value in configs:
- _run("npm config set %s %s" % (key, shlex.quote(value)))
+ cmd += " --%s=%s" % (key, shlex.quote(value))
if args:
for key, value in args:
@@ -165,14 +179,14 @@
def _resolve_proxy_url(self, ud, d):
def _npm_view():
- configs = []
- configs.append(("json", "true"))
- configs.append(("registry", ud.registry))
+ args = []
+ args.append(("json", "true"))
+ args.append(("registry", ud.registry))
pkgver = shlex.quote(ud.package + "@" + ud.version)
cmd = ud.basecmd + " view %s" % pkgver
env = NpmEnvironment(d)
check_network_access(d, cmd, ud.registry)
- view_string = env.run(cmd, configs=configs)
+ view_string = env.run(cmd, args=args)
if not view_string:
raise FetchError("Unavailable package %s" % pkgver, ud.url)
diff --git a/poky/bitbake/lib/bb/fetch2/npmsw.py b/poky/bitbake/lib/bb/fetch2/npmsw.py
index 0c3511d..426a139 100644
--- a/poky/bitbake/lib/bb/fetch2/npmsw.py
+++ b/poky/bitbake/lib/bb/fetch2/npmsw.py
@@ -24,11 +24,14 @@
from bb.fetch2 import Fetch
from bb.fetch2 import FetchMethod
from bb.fetch2 import ParameterError
+from bb.fetch2 import runfetchcmd
from bb.fetch2 import URI
from bb.fetch2.npm import npm_integrity
from bb.fetch2.npm import npm_localfile
from bb.fetch2.npm import npm_unpack
from bb.utils import is_semver
+from bb.utils import lockfile
+from bb.utils import unlockfile
def foreach_dependencies(shrinkwrap, callback=None, dev=False):
"""
@@ -78,6 +81,7 @@
extrapaths = []
destsubdirs = [os.path.join("node_modules", dep) for dep in deptree]
destsuffix = os.path.join(*destsubdirs)
+ unpack = True
integrity = params.get("integrity", None)
resolved = params.get("resolved", None)
@@ -148,7 +152,12 @@
url = str(uri)
- # local tarball sources and local link sources are unsupported
+ # Handle local tarball and link sources
+ elif version.startswith("file"):
+ localpath = version[5:]
+ if not version.endswith(".tgz"):
+ unpack = False
+
else:
raise ParameterError("Unsupported dependency: %s" % name, ud.url)
@@ -157,6 +166,7 @@
"localpath": localpath,
"extrapaths": extrapaths,
"destsuffix": destsuffix,
+ "unpack": unpack,
})
try:
@@ -177,7 +187,7 @@
# This fetcher resolves multiple URIs from a shrinkwrap file and then
# forwards it to a proxy fetcher. The management of the donestamp file,
# the lockfile and the checksums are forwarded to the proxy fetcher.
- ud.proxy = Fetch([dep["url"] for dep in ud.deps], data)
+ ud.proxy = Fetch([dep["url"] for dep in ud.deps if dep["url"]], data)
ud.needdonestamp = False
@staticmethod
@@ -187,7 +197,9 @@
proxy_ud = ud.proxy.ud[proxy_url]
proxy_d = ud.proxy.d
proxy_ud.setup_localpath(proxy_d)
+ lf = lockfile(proxy_ud.lockfile)
returns.append(handle(proxy_ud.method, proxy_ud, proxy_d))
+ unlockfile(lf)
return returns
def verify_donestamp(self, ud, d):
@@ -237,7 +249,16 @@
for dep in manual:
depdestdir = os.path.join(destdir, dep["destsuffix"])
- npm_unpack(dep["localpath"], depdestdir, d)
+ if dep["url"]:
+ npm_unpack(dep["localpath"], depdestdir, d)
+ else:
+ depsrcdir= os.path.join(destdir, dep["localpath"])
+ if dep["unpack"]:
+ npm_unpack(depsrcdir, depdestdir, d)
+ else:
+ bb.utils.mkdirhier(depdestdir)
+ cmd = 'cp -fpPRH "%s/." .' % (depsrcdir)
+ runfetchcmd(cmd, d, workdir=depdestdir)
def clean(self, ud, d):
"""Clean any existing full or partial download"""
diff --git a/poky/bitbake/lib/bb/fetch2/perforce.py b/poky/bitbake/lib/bb/fetch2/perforce.py
index e2a41a4..3b6fa4b 100644
--- a/poky/bitbake/lib/bb/fetch2/perforce.py
+++ b/poky/bitbake/lib/bb/fetch2/perforce.py
@@ -134,7 +134,7 @@
ud.setup_revisions(d)
- ud.localfile = d.expand('%s_%s_%s_%s.tar.gz' % (cleanedhost, cleanedpath, cleandedmodule, ud.revision))
+ ud.localfile = d.expand('%s_%s_%s_%s.tar.gz' % (cleanedhost, cleanedpath, cleanedmodule, ud.revision))
def _buildp4command(self, ud, d, command, depot_filename=None):
"""
diff --git a/poky/bitbake/lib/bb/siggen.py b/poky/bitbake/lib/bb/siggen.py
index 625a9cf..578ba5d 100644
--- a/poky/bitbake/lib/bb/siggen.py
+++ b/poky/bitbake/lib/bb/siggen.py
@@ -11,6 +11,8 @@
import bb.data
import difflib
import simplediff
+import json
+import bb.compress.zstd
from bb.checksum import FileChecksumCache
from bb import runqueue
import hashserv
@@ -19,6 +21,17 @@
logger = logging.getLogger('BitBake.SigGen')
hashequiv_logger = logging.getLogger('BitBake.SigGen.HashEquiv')
+class SetEncoder(json.JSONEncoder):
+ def default(self, obj):
+ if isinstance(obj, set):
+ return dict(_set_object=list(sorted(obj)))
+ return json.JSONEncoder.default(self, obj)
+
+def SetDecoder(dct):
+ if '_set_object' in dct:
+ return set(dct['_set_object'])
+ return dct
+
def init(d):
siggens = [obj for obj in globals().values()
if type(obj) is type and issubclass(obj, SignatureGenerator)]
@@ -398,9 +411,9 @@
fd, tmpfile = tempfile.mkstemp(dir=os.path.dirname(sigfile), prefix="sigtask.")
try:
- with os.fdopen(fd, "wb") as stream:
- p = pickle.dump(data, stream, -1)
- stream.flush()
+ with bb.compress.zstd.open(fd, "wt", encoding="utf-8", num_threads=1) as f:
+ json.dump(data, f, sort_keys=True, separators=(",", ":"), cls=SetEncoder)
+ f.flush()
os.chmod(tmpfile, 0o664)
bb.utils.rename(tmpfile, sigfile)
except (OSError, IOError) as err:
@@ -794,12 +807,10 @@
formatparams.update(values)
return formatstr.format(**formatparams)
- with open(a, 'rb') as f:
- p1 = pickle.Unpickler(f)
- a_data = p1.load()
- with open(b, 'rb') as f:
- p2 = pickle.Unpickler(f)
- b_data = p2.load()
+ with bb.compress.zstd.open(a, "rt", encoding="utf-8", num_threads=1) as f:
+ a_data = json.load(f, object_hook=SetDecoder)
+ with bb.compress.zstd.open(b, "rt", encoding="utf-8", num_threads=1) as f:
+ b_data = json.load(f, object_hook=SetDecoder)
def dict_diff(a, b, whitelist=set()):
sa = set(a.keys())
@@ -815,11 +826,11 @@
def file_checksums_diff(a, b):
from collections import Counter
- # Handle old siginfo format
- if isinstance(a, dict):
- a = [(os.path.basename(f), cs) for f, cs in a.items()]
- if isinstance(b, dict):
- b = [(os.path.basename(f), cs) for f, cs in b.items()]
+
+ # Convert lists back to tuples
+ a = [(f[0], f[1]) for f in a]
+ b = [(f[0], f[1]) for f in b]
+
# Compare lists, ensuring we can handle duplicate filenames if they exist
removedcount = Counter(a)
removedcount.subtract(b)
@@ -902,9 +913,9 @@
output.append(color_format("{color_title}Variable {var} value changed from '{color_default}{oldval}{color_title}' to '{color_default}{newval}{color_title}'{color_default}", var=dep, oldval=oldval, newval=newval))
if not 'file_checksum_values' in a_data:
- a_data['file_checksum_values'] = {}
+ a_data['file_checksum_values'] = []
if not 'file_checksum_values' in b_data:
- b_data['file_checksum_values'] = {}
+ b_data['file_checksum_values'] = []
changed, added, removed = file_checksums_diff(a_data['file_checksum_values'], b_data['file_checksum_values'])
if changed:
@@ -1031,9 +1042,8 @@
def dump_sigfile(a):
output = []
- with open(a, 'rb') as f:
- p1 = pickle.Unpickler(f)
- a_data = p1.load()
+ with bb.compress.zstd.open(a, "rt", encoding="utf-8", num_threads=1) as f:
+ a_data = json.load(f, object_hook=SetDecoder)
output.append("basewhitelist: %s" % (a_data['basewhitelist']))
diff --git a/poky/bitbake/lib/bb/tests/fetch.py b/poky/bitbake/lib/bb/tests/fetch.py
index af292a2..8ad1c85 100644
--- a/poky/bitbake/lib/bb/tests/fetch.py
+++ b/poky/bitbake/lib/bb/tests/fetch.py
@@ -376,7 +376,7 @@
def setUp(self):
self.origdir = os.getcwd()
self.d = bb.data.init()
- self.tempdir = tempfile.mkdtemp()
+ self.tempdir = tempfile.mkdtemp(prefix="bitbake-fetch-")
self.dldir = os.path.join(self.tempdir, "download")
os.mkdir(self.dldir)
self.d.setVar("DL_DIR", self.dldir)
@@ -826,12 +826,12 @@
class FetcherNetworkTest(FetcherTest):
@skipIfNoNetwork()
def test_fetch(self):
- fetcher = bb.fetch.Fetch(["http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", "http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.1.tar.gz"], self.d)
+ fetcher = bb.fetch.Fetch(["https://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", "https://downloads.yoctoproject.org/releases/bitbake/bitbake-1.1.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.1.tar.gz"), 57892)
self.d.setVar("BB_NO_NETWORK", "1")
- fetcher = bb.fetch.Fetch(["http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", "http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.1.tar.gz"], self.d)
+ fetcher = bb.fetch.Fetch(["https://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", "https://downloads.yoctoproject.org/releases/bitbake/bitbake-1.1.tar.gz"], self.d)
fetcher.download()
fetcher.unpack(self.unpackdir)
self.assertEqual(len(os.listdir(self.unpackdir + "/bitbake-1.0/")), 9)
@@ -839,21 +839,21 @@
@skipIfNoNetwork()
def test_fetch_mirror(self):
- self.d.setVar("MIRRORS", "http://.*/.* http://downloads.yoctoproject.org/releases/bitbake")
+ self.d.setVar("MIRRORS", "http://.*/.* https://downloads.yoctoproject.org/releases/bitbake")
fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
@skipIfNoNetwork()
def test_fetch_mirror_of_mirror(self):
- self.d.setVar("MIRRORS", "http://.*/.* http://invalid2.yoctoproject.org/ \n http://invalid2.yoctoproject.org/.* http://downloads.yoctoproject.org/releases/bitbake")
+ self.d.setVar("MIRRORS", "http://.*/.* http://invalid2.yoctoproject.org/ \n http://invalid2.yoctoproject.org/.* https://downloads.yoctoproject.org/releases/bitbake")
fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
@skipIfNoNetwork()
def test_fetch_file_mirror_of_mirror(self):
- self.d.setVar("MIRRORS", "http://.*/.* file:///some1where/ \n file:///some1where/.* file://some2where/ \n file://some2where/.* http://downloads.yoctoproject.org/releases/bitbake")
+ self.d.setVar("MIRRORS", "http://.*/.* file:///some1where/ \n file:///some1where/.* file://some2where/ \n file://some2where/.* https://downloads.yoctoproject.org/releases/bitbake")
fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz"], self.d)
os.mkdir(self.dldir + "/some2where")
fetcher.download()
@@ -861,20 +861,20 @@
@skipIfNoNetwork()
def test_fetch_premirror(self):
- self.d.setVar("PREMIRRORS", "http://.*/.* http://downloads.yoctoproject.org/releases/bitbake")
+ self.d.setVar("PREMIRRORS", "http://.*/.* https://downloads.yoctoproject.org/releases/bitbake")
fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
@skipIfNoNetwork()
def test_fetch_specify_downloadfilename(self):
- fetcher = bb.fetch.Fetch(["http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz;downloadfilename=bitbake-v1.0.0.tar.gz"], self.d)
+ fetcher = bb.fetch.Fetch(["https://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz;downloadfilename=bitbake-v1.0.0.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-v1.0.0.tar.gz"), 57749)
@skipIfNoNetwork()
def test_fetch_premirror_specify_downloadfilename_regex_uri(self):
- self.d.setVar("PREMIRRORS", "http://.*/.* http://downloads.yoctoproject.org/releases/bitbake/")
+ self.d.setVar("PREMIRRORS", "http://.*/.* https://downloads.yoctoproject.org/releases/bitbake/")
fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz;downloadfilename=bitbake-v1.0.0.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-v1.0.0.tar.gz"), 57749)
@@ -882,7 +882,7 @@
@skipIfNoNetwork()
# BZ13039
def test_fetch_premirror_specify_downloadfilename_specific_uri(self):
- self.d.setVar("PREMIRRORS", "http://invalid.yoctoproject.org/releases/bitbake http://downloads.yoctoproject.org/releases/bitbake")
+ self.d.setVar("PREMIRRORS", "http://invalid.yoctoproject.org/releases/bitbake https://downloads.yoctoproject.org/releases/bitbake")
fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz;downloadfilename=bitbake-v1.0.0.tar.gz"], self.d)
fetcher.download()
self.assertEqual(os.path.getsize(self.dldir + "/bitbake-v1.0.0.tar.gz"), 57749)
@@ -1012,7 +1012,7 @@
@skipIfNoNetwork()
def test_git_submodule_CLI11(self):
- url = "gitsm://github.com/CLIUtils/CLI11;protocol=git;rev=bd4dc911847d0cde7a6b41dfa626a85aab213baf"
+ url = "gitsm://github.com/CLIUtils/CLI11;protocol=git;rev=bd4dc911847d0cde7a6b41dfa626a85aab213baf;branch=main"
fetcher = bb.fetch.Fetch([url], self.d)
fetcher.download()
# Previous cwd has been deleted
@@ -1027,12 +1027,12 @@
@skipIfNoNetwork()
def test_git_submodule_update_CLI11(self):
""" Prevent regression on update detection not finding missing submodule, or modules without needed commits """
- url = "gitsm://github.com/CLIUtils/CLI11;protocol=git;rev=cf6a99fa69aaefe477cc52e3ef4a7d2d7fa40714"
+ url = "gitsm://github.com/CLIUtils/CLI11;protocol=git;rev=cf6a99fa69aaefe477cc52e3ef4a7d2d7fa40714;branch=main"
fetcher = bb.fetch.Fetch([url], self.d)
fetcher.download()
# CLI11 that pulls in a newer nlohmann-json
- url = "gitsm://github.com/CLIUtils/CLI11;protocol=git;rev=49ac989a9527ee9bb496de9ded7b4872c2e0e5ca"
+ url = "gitsm://github.com/CLIUtils/CLI11;protocol=git;rev=49ac989a9527ee9bb496de9ded7b4872c2e0e5ca;branch=main"
fetcher = bb.fetch.Fetch([url], self.d)
fetcher.download()
# Previous cwd has been deleted
@@ -1291,10 +1291,10 @@
#
# packages with versions only in current directory
#
- # http://downloads.yoctoproject.org/releases/eglibc/eglibc-2.18-svnr23787.tar.bz2
+ # https://downloads.yoctoproject.org/releases/eglibc/eglibc-2.18-svnr23787.tar.bz2
("eglic", "/releases/eglibc/eglibc-2.18-svnr23787.tar.bz2", "", "")
: "2.19",
- # http://downloads.yoctoproject.org/releases/gnu-config/gnu-config-20120814.tar.bz2
+ # https://downloads.yoctoproject.org/releases/gnu-config/gnu-config-20120814.tar.bz2
("gnu-config", "/releases/gnu-config/gnu-config-20120814.tar.bz2", "", "")
: "20120814",
#
@@ -1357,13 +1357,13 @@
class FetchCheckStatusTest(FetcherTest):
- test_wget_uris = ["http://downloads.yoctoproject.org/releases/sato/sato-engine-0.1.tar.gz",
- "http://downloads.yoctoproject.org/releases/sato/sato-engine-0.2.tar.gz",
- "http://downloads.yoctoproject.org/releases/sato/sato-engine-0.3.tar.gz",
+ test_wget_uris = ["https://downloads.yoctoproject.org/releases/sato/sato-engine-0.1.tar.gz",
+ "https://downloads.yoctoproject.org/releases/sato/sato-engine-0.2.tar.gz",
+ "https://downloads.yoctoproject.org/releases/sato/sato-engine-0.3.tar.gz",
"https://yoctoproject.org/",
"https://docs.yoctoproject.org",
- "http://downloads.yoctoproject.org/releases/opkg/opkg-0.1.7.tar.gz",
- "http://downloads.yoctoproject.org/releases/opkg/opkg-0.3.0.tar.gz",
+ "https://downloads.yoctoproject.org/releases/opkg/opkg-0.1.7.tar.gz",
+ "https://downloads.yoctoproject.org/releases/opkg/opkg-0.3.0.tar.gz",
"ftp://sourceware.org/pub/libffi/libffi-1.20.tar.gz",
"http://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz",
"https://ftp.gnu.org/gnu/chess/gnuchess-5.08.tar.gz",
diff --git a/poky/bitbake/lib/bb/tests/runqueue-tests/conf/bitbake.conf b/poky/bitbake/lib/bb/tests/runqueue-tests/conf/bitbake.conf
index efebf00..2645c0e 100644
--- a/poky/bitbake/lib/bb/tests/runqueue-tests/conf/bitbake.conf
+++ b/poky/bitbake/lib/bb/tests/runqueue-tests/conf/bitbake.conf
@@ -12,6 +12,6 @@
T = "${TMPDIR}/workdir/${PN}/temp"
BB_NUMBER_THREADS = "4"
-BB_HASHBASE_WHITELIST = "BB_CURRENT_MC BB_HASHSERVE TMPDIR TOPDIR SLOWTASKS SSTATEVALID FILE"
+BB_HASHBASE_WHITELIST = "BB_CURRENT_MC BB_HASHSERVE TMPDIR TOPDIR SLOWTASKS SSTATEVALID FILE BB_CURRENTTASK"
include conf/multiconfig/${BB_CURRENT_MC}.conf
diff --git a/poky/bitbake/lib/bb/tests/runqueue.py b/poky/bitbake/lib/bb/tests/runqueue.py
index 3d51779..5b6ada8 100644
--- a/poky/bitbake/lib/bb/tests/runqueue.py
+++ b/poky/bitbake/lib/bb/tests/runqueue.py
@@ -278,7 +278,6 @@
["mc_2:a1:%s" % t for t in rerun_tasks]
self.assertEqual(set(tasks), set(expected))
- @unittest.skipIf(sys.version_info < (3, 5, 0), 'Python 3.5 or later required')
def test_hashserv_single(self):
with tempfile.TemporaryDirectory(prefix="runqueuetest") as tempdir:
extraenv = {
@@ -304,7 +303,6 @@
self.shutdown(tempdir)
- @unittest.skipIf(sys.version_info < (3, 5, 0), 'Python 3.5 or later required')
def test_hashserv_double(self):
with tempfile.TemporaryDirectory(prefix="runqueuetest") as tempdir:
extraenv = {
@@ -329,7 +327,6 @@
self.shutdown(tempdir)
- @unittest.skipIf(sys.version_info < (3, 5, 0), 'Python 3.5 or later required')
def test_hashserv_multiple_setscene(self):
# Runs e1:do_package_setscene twice
with tempfile.TemporaryDirectory(prefix="runqueuetest") as tempdir:
@@ -361,7 +358,7 @@
def shutdown(self, tempdir):
# Wait for the hashserve socket to disappear else we'll see races with the tempdir cleanup
- while os.path.exists(tempdir + "/hashserve.sock"):
+ while (os.path.exists(tempdir + "/hashserve.sock") or os.path.exists(tempdir + "cache/hashserv.db-wal")):
time.sleep(0.5)
diff --git a/poky/bitbake/lib/bb/tests/utils.py b/poky/bitbake/lib/bb/tests/utils.py
index 4d5e21b..c363f62 100644
--- a/poky/bitbake/lib/bb/tests/utils.py
+++ b/poky/bitbake/lib/bb/tests/utils.py
@@ -418,7 +418,7 @@
['MULTILINE'],
handle_var)
- testvalue = re.sub('\s+', ' ', value_in_callback.strip())
+ testvalue = re.sub(r'\s+', ' ', value_in_callback.strip())
self.assertEqual(expected_value, testvalue)
class EditBbLayersConf(unittest.TestCase):
diff --git a/poky/bitbake/lib/bb/ui/knotty.py b/poky/bitbake/lib/bb/ui/knotty.py
index 8df745d..484545a 100644
--- a/poky/bitbake/lib/bb/ui/knotty.py
+++ b/poky/bitbake/lib/bb/ui/knotty.py
@@ -276,11 +276,11 @@
print(content)
else:
if self.quiet:
- content = "Running tasks (%s of %s)" % (self.helper.tasknumber_current, self.helper.tasknumber_total)
+ content = "Running tasks (%s of %s/%s of %s)" % (self.helper.setscene_current, self.helper.setscene_total, self.helper.tasknumber_current, self.helper.tasknumber_total)
elif not len(activetasks):
- content = "No currently running tasks (%s of %s)" % (self.helper.tasknumber_current, self.helper.tasknumber_total)
+ content = "No currently running tasks (%s of %s/%s of %s)" % (self.helper.setscene_current, self.helper.setscene_total, self.helper.tasknumber_current, self.helper.tasknumber_total)
else:
- content = "Currently %2s running tasks (%s of %s)" % (len(activetasks), self.helper.tasknumber_current, self.helper.tasknumber_total)
+ content = "Currently %2s running tasks (%s of %s/%s of %s)" % (len(activetasks), self.helper.setscene_current, self.helper.setscene_total, self.helper.tasknumber_current, self.helper.tasknumber_total)
maxtask = self.helper.tasknumber_total
if not self.main_progress or self.main_progress.maxval != maxtask:
widgets = [' ', progressbar.Percentage(), ' ', progressbar.Bar()]
diff --git a/poky/bitbake/lib/bb/ui/uihelper.py b/poky/bitbake/lib/bb/ui/uihelper.py
index 52fdae3..82913e0 100644
--- a/poky/bitbake/lib/bb/ui/uihelper.py
+++ b/poky/bitbake/lib/bb/ui/uihelper.py
@@ -50,8 +50,10 @@
removetid(event.pid, tid)
self.failed_tasks.append( { 'title' : "%s %s" % (event._package, event._task)})
elif isinstance(event, bb.runqueue.runQueueTaskStarted) or isinstance(event, bb.runqueue.sceneQueueTaskStarted):
- self.tasknumber_current = event.stats.completed + event.stats.active + event.stats.failed + event.stats.setscene_active + 1
+ self.tasknumber_current = event.stats.completed + event.stats.active + event.stats.failed
self.tasknumber_total = event.stats.total
+ self.setscene_current = event.stats.setscene_active + event.stats.setscene_covered + event.stats.setscene_notcovered
+ self.setscene_total = event.stats.setscene_total
self.needUpdate = True
elif isinstance(event, bb.build.TaskProgress):
if event.pid > 0 and event.pid in self.pidmap: